* [PATCH 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
@ 2022-07-20 23:51 William Zhang
0 siblings, 0 replies; only message in thread
From: William Zhang @ 2022-07-20 23:51 UTC (permalink / raw)
To: william.zhang
Cc: joel.peshkin, dan.beygelman, Rob Herring, Krzysztof Kozlowski,
Rafał Miłecki, Broadcom internal kernel review list,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list, moderated list:BROADCOM BCMBCA ARM ARCHITECTURE,
Philipp Zabel, open list:I2C SUBSYSTEM HOST DRIVERS,
open list:MEMORY TECHNOLOGY DEVICES (MTD),
open list:NETWORKING DRIVERS,
open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS,
open list:GENERIC PHY FRAMEWORK, open list:PIN CONTROL SUBSYSTEM,
open list:BROADCOM BMIPS MIPS ARCHITECTURE,
open list:SERIAL DRIVERS, open list:WATCHDOG DEVICE DRIVERS,
Catalin Marinas, Will Deacon, Krzysztof Kozlowski
[-- Attachment #1.1: Type: text/plain, Size: 2842 bytes --]
Now that Broadcom Broadband arch ARCH_BCMBCA is in the kernel, this
patch series migrates the existing broadband chip BCM4908 support to
ARCH_BCMBCA.
William Zhang (9):
dt-bindings: arm64: bcmbca: Merge BCM4908 into BCMBCA
dt-bindings: arm64: bcmbca: Update BCM4908 description
arm64: dts: bcmbca: update BCM4908 board dts files
arm64: dts: Move BCM4908 dts to bcmbca folder
arm64: dts: Add BCM4908 generic board dts
arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA
MAINTAINERS: Add BCM4908 maintainer to BCMBCA entry
arm64: defconfig: remove BCM4908
.../bindings/arm/bcm/brcm,bcm4908.yaml | 42 -------------------
.../bindings/arm/bcm/brcm,bcmbca.yaml | 25 +++++++++++
MAINTAINERS | 1 +
arch/arm64/Kconfig.platforms | 10 +----
arch/arm64/boot/dts/broadcom/Makefile | 1 -
arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 5 ---
arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 5 +++
.../bcm4906-netgear-r8000p.dts | 2 +-
.../bcm4906-tplink-archer-c2300-v1.dts | 2 +-
.../broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi | 0
.../bcm4908-asus-gt-ac5300.dts | 2 +-
.../bcm4908-netgear-raxe500.dts | 2 +-
.../broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi | 0
.../boot/dts/broadcom/bcmbca/bcm94908.dts | 30 +++++++++++++
arch/arm64/configs/defconfig | 1 -
drivers/i2c/busses/Kconfig | 4 +-
drivers/mtd/parsers/Kconfig | 6 +--
drivers/net/ethernet/broadcom/Kconfig | 4 +-
drivers/pci/controller/Kconfig | 2 +-
drivers/phy/broadcom/Kconfig | 4 +-
drivers/pinctrl/bcm/Kconfig | 4 +-
drivers/reset/Kconfig | 2 +-
drivers/soc/bcm/bcm63xx/Kconfig | 4 +-
drivers/tty/serial/Kconfig | 4 +-
drivers/watchdog/Kconfig | 2 +-
25 files changed, 84 insertions(+), 80 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile
rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts (96%)
rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts (99%)
rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi (100%)
rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts (97%)
rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts (89%)
rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi (100%)
create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
--
2.34.1
[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
[-- Attachment #2: Type: text/plain, Size: 144 bytes --]
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2022-07-20 23:52 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-07-20 23:51 [PATCH 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA William Zhang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).