From: William Zhang <william.zhang@broadcom.com>
To: Linux ARM List <linux-arm-kernel@lists.infradead.org>
Cc: joel.peshkin@broadcom.com, dan.beygelman@broadcom.com,
"William Zhang" <william.zhang@broadcom.com>,
"Miquel Raynal" <miquel.raynal@bootlin.com>,
"David S. Miller" <davem@davemloft.net>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Kishon Vijay Abraham I" <kishon@ti.com>,
"Vinod Koul" <vkoul@kernel.org>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Wim Van Sebroeck" <wim@linux-watchdog.org>,
"Rafał Miłecki" <rafal@milecki.pl>,
linux-i2c@vger.kernel.org (open list:I2C SUBSYSTEM HOST DRIVERS),
linux-kernel@vger.kernel.org (open list),
linux-mtd@lists.infradead.org (open list:MEMORY TECHNOLOGY
DEVICES (MTD)),
netdev@vger.kernel.org (open list:NETWORKING DRIVERS),
linux-pci@vger.kernel.org (open list:PCI NATIVE HOST BRIDGE AND
ENDPOINT DRIVERS),
linux-phy@lists.infradead.org (open list:GENERIC PHY FRAMEWORK),
linux-gpio@vger.kernel.org (open list:PIN CONTROL SUBSYSTEM),
linux-mips@vger.kernel.org (open list:BROADCOM BMIPS MIPS
ARCHITECTURE),
linux-serial@vger.kernel.org (open list:SERIAL DRIVERS),
linux-watchdog@vger.kernel.org (open list:WATCHDOG DEVICE
DRIVERS)
Subject: [RESEND PATCH 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
Date: Wed, 20 Jul 2022 17:07:40 -0700 [thread overview]
Message-ID: <20220721000740.29624-1-william.zhang@broadcom.com> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 7165 bytes --]
Replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
---
drivers/i2c/busses/Kconfig | 4 ++--
drivers/mtd/parsers/Kconfig | 6 +++---
drivers/net/ethernet/broadcom/Kconfig | 4 ++--
drivers/pci/controller/Kconfig | 2 +-
drivers/phy/broadcom/Kconfig | 4 ++--
drivers/pinctrl/bcm/Kconfig | 4 ++--
drivers/reset/Kconfig | 2 +-
drivers/soc/bcm/bcm63xx/Kconfig | 4 ++--
drivers/tty/serial/Kconfig | 4 ++--
drivers/watchdog/Kconfig | 2 +-
10 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 45a4e9f1b639..fd9a4dd01997 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -487,8 +487,8 @@ config I2C_BCM_KONA
config I2C_BRCMSTB
tristate "BRCM Settop/DSL I2C controller"
- depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCMBCA || \
- ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+ depends on ARCH_BCM2835 || ARCH_BCMBCA || ARCH_BRCMSTB || \
+ BMIPS_GENERIC || COMPILE_TEST
default y
help
If you say yes to this option, support will be included for the
diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
index b43df73927a0..d6db655a1d24 100644
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -69,8 +69,8 @@ config MTD_OF_PARTS
config MTD_OF_PARTS_BCM4908
bool "BCM4908 partitioning support"
- depends on MTD_OF_PARTS && (ARCH_BCM4908 || COMPILE_TEST)
- default ARCH_BCM4908
+ depends on MTD_OF_PARTS && (ARCH_BCMBCA || COMPILE_TEST)
+ default ARCH_BCMBCA
help
This provides partitions parser for BCM4908 family devices
that can have multiple "firmware" partitions. It takes care of
@@ -78,7 +78,7 @@ config MTD_OF_PARTS_BCM4908
config MTD_OF_PARTS_LINKSYS_NS
bool "Linksys Northstar partitioning support"
- depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCM4908 || COMPILE_TEST)
+ depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCMBCA || COMPILE_TEST)
default ARCH_BCM_5301X
help
This provides partitions parser for Linksys devices based on Broadcom
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index 56e0fb07aec7..f4e1ca68d831 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -53,8 +53,8 @@ config B44_PCI
config BCM4908_ENET
tristate "Broadcom BCM4908 internal mac support"
- depends on ARCH_BCM4908 || COMPILE_TEST
- default y if ARCH_BCM4908
+ depends on ARCH_BCMBCA || COMPILE_TEST
+ default y if ARCH_BCMBCA
help
This driver supports Ethernet controller integrated into Broadcom
BCM4908 family SoCs.
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index d1c5fcf00a8a..bfd9bac37e24 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -274,7 +274,7 @@ config VMD
config PCIE_BRCMSTB
tristate "Broadcom Brcmstb PCIe host controller"
- depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM4908 || \
+ depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \
BMIPS_GENERIC || COMPILE_TEST
depends on OF
depends on PCI_MSI_IRQ_DOMAIN
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index 93a6a8ee4716..1d89a2fd9b79 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -93,11 +93,11 @@ config PHY_BRCM_SATA
config PHY_BRCM_USB
tristate "Broadcom STB USB PHY driver"
- depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST
+ depends on ARCH_BCMBCA || ARCH_BRCMSTB || COMPILE_TEST
depends on OF
select GENERIC_PHY
select SOC_BRCMSTB if ARCH_BRCMSTB
- default ARCH_BCM4908 || ARCH_BRCMSTB
+ default ARCH_BCMBCA || ARCH_BRCMSTB
help
Enable this to support the Broadcom STB USB PHY.
This driver is required by the USB XHCI, EHCI and OHCI
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 8f4d89806fcb..35b51ce4298e 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -31,13 +31,13 @@ config PINCTRL_BCM2835
config PINCTRL_BCM4908
tristate "Broadcom BCM4908 pinmux driver"
- depends on OF && (ARCH_BCM4908 || COMPILE_TEST)
+ depends on OF && (ARCH_BCMBCA || COMPILE_TEST)
select PINMUX
select PINCONF
select GENERIC_PINCONF
select GENERIC_PINCTRL_GROUPS
select GENERIC_PINMUX_FUNCTIONS
- default ARCH_BCM4908
+ default ARCH_BCMBCA
help
Driver for BCM4908 family SoCs with integrated pin controller.
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index f9a7cee01659..7ae71535fe2a 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -201,7 +201,7 @@ config RESET_SCMI
config RESET_SIMPLE
bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
- default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
+ default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
help
This enables a simple reset controller driver for reset lines that
that can be asserted and deasserted by toggling bits in a contiguous,
diff --git a/drivers/soc/bcm/bcm63xx/Kconfig b/drivers/soc/bcm/bcm63xx/Kconfig
index 9e501c8ac5ce..355c34482076 100644
--- a/drivers/soc/bcm/bcm63xx/Kconfig
+++ b/drivers/soc/bcm/bcm63xx/Kconfig
@@ -13,8 +13,8 @@ endif # SOC_BCM63XX
config BCM_PMB
bool "Broadcom PMB (Power Management Bus) driver"
- depends on ARCH_BCM4908 || (COMPILE_TEST && OF)
- default ARCH_BCM4908
+ depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
+ default ARCH_BCMBCA
select PM_GENERIC_DOMAINS if PM
help
This enables support for the Broadcom's PMB (Power Management Bus) that
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index e3279544b03c..f32bb01c3feb 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1100,8 +1100,8 @@ config SERIAL_TIMBERDALE
config SERIAL_BCM63XX
tristate "Broadcom BCM63xx/BCM33xx UART support"
select SERIAL_CORE
- depends on ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
- default ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
+ depends on ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+ default ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
help
This enables the driver for the onchip UART core found on
the following chipsets:
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 32fd37698932..1f85ec8a4b3b 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1798,7 +1798,7 @@ config BCM7038_WDT
tristate "BCM63xx/BCM7038 Watchdog"
select WATCHDOG_CORE
depends on HAS_IOMEM
- depends on ARCH_BCM4908 || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
+ depends on ARCH_BCMBCA || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
help
Watchdog driver for the built-in hardware in Broadcom 7038 and
later SoCs used in set-top boxes. BCM7038 was made public
--
2.34.1
[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
[-- Attachment #2: Type: text/plain, Size: 144 bytes --]
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next reply other threads:[~2022-07-21 0:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-21 0:07 William Zhang [this message]
2022-07-21 3:33 ` [RESEND PATCH 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA Guenter Roeck
2022-07-21 7:30 ` Rafał Miłecki
2022-07-21 19:44 ` William Zhang
2022-07-21 7:44 ` Rafał Miłecki
2022-07-21 18:56 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220721000740.29624-1-william.zhang@broadcom.com \
--to=william.zhang@broadcom.com \
--cc=bhelgaas@google.com \
--cc=dan.beygelman@broadcom.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=joel.peshkin@broadcom.com \
--cc=kishon@ti.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=rafal@milecki.pl \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).