From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Tudor Ambarus <tudor.ambarus@linaro.org>,
Pratyush Yadav <pratyush@kernel.org>,
Michael Walle <michael@walle.cc>, <linux-mtd@lists.infradead.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [PATCH v3] mtd: spi-nor: Add support for sst26vf032b flash
Date: Wed, 12 Jul 2023 18:15:03 +0200 [thread overview]
Message-ID: <20230712161503.448024-1-miquel.raynal@bootlin.com> (raw)
Describe this new part. The datasheet is public.
Link: https://ww1.microchip.com/downloads/aemDocuments/documents/MPD/ProductDocuments/DataSheets/SST26VF032B-SST26VF032BA-2.5V-3.0V-32-Mbit-Serial-Quad-IO-%28SQI%29-Flash-Memory-20005218K.pdf
Here are the sfdp tables plus base testing to show it works.
$ cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
sst26vf032b
$ cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id
bf2642
$ cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer
sst
$ xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp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$ md5sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
e7efddddb3d5ee89ca37bf6b6e789645 /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
$ dd if=/dev/urandom of=./qspi_test bs=1M count=1
1+0 records in
1+0 records out
$ mtd_debug write /dev/mtd0 0 1048576 qspi_test
Copied 1048576 bytes from qspi_test to address 0x00000000 in flash
$ mtd_debug erase /dev/mtd0 0 1048576
Erased 1048576 bytes from address 0x00000000 in flash
$ mtd_debug read /dev/mtd0 0 1048576 qspi_read
Copied 1048576 bytes from address 0x00000000 in flash to qspi_read
$ hexdump qspi_read
0000000 ffff ffff ffff ffff ffff ffff ffff ffff
*
0100000
$ mtd_debug write /dev/mtd0 0 1048576 qspi_test
Copied 1048576 bytes from qspi_test to address 0x00000000 in flash
$ mtd_debug read /dev/mtd0 0 1048576 qspi_read
Copied 1048576 bytes from address 0x00000000 in flash to qspi_read
$ sha1sum qspi_test qspi_read
2f2f191c7a937eca5db21a1c39e79e7327587cc1 qspi_test
2f2f191c7a937eca5db21a1c39e79e7327587cc1 qspi_read
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
Changes in v3:
* Dropped the second patch (untested changes as advised by Tudor).
* Avoided playing with locking as I cannot test it either: simplified
the diff by just using the PARSE_SFDP flag.
* Rebased on top of -rc1 and adapted the patch to the current state.
drivers/mtd/spi-nor/sst.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
index 688eb20c763e..754e49f7ac33 100644
--- a/drivers/mtd/spi-nor/sst.c
+++ b/drivers/mtd/spi-nor/sst.c
@@ -111,6 +111,8 @@ static const struct flash_info sst_nor_parts[] = {
SPI_NOR_QUAD_READ) },
{ "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32)
NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+ { "sst26vf032b", INFO(0xbf2642, 0, 0, 0)
+ PARSE_SFDP
{ "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128)
FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
--
2.34.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next reply other threads:[~2023-07-12 16:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-12 16:15 Miquel Raynal [this message]
2023-07-12 21:18 ` [PATCH v3] mtd: spi-nor: Add support for sst26vf032b flash Michael Walle
2023-07-13 2:20 ` Tudor Ambarus
2023-07-13 7:08 ` Michael Walle
2023-07-13 7:34 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230712161503.448024-1-miquel.raynal@bootlin.com \
--to=miquel.raynal@bootlin.com \
--cc=linux-mtd@lists.infradead.org \
--cc=michael@walle.cc \
--cc=pratyush@kernel.org \
--cc=richard@nod.at \
--cc=thomas.petazzoni@bootlin.com \
--cc=tudor.ambarus@linaro.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).