From: Mikhail Zhilkin <csharper2005@gmail.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: NOGUCHI Hiroshi <drvlabo@gmail.com>, Karim <Karimdplay@gmail.com>,
M <x1@disroot.org>,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser
Date: Thu, 28 Apr 2022 18:24:35 +0300 [thread overview]
Message-ID: <25da3f43-c46e-8108-2da9-0e4f2b7cc1a4@gmail.com> (raw)
In-Reply-To: <db70e53b-7484-43bf-e9c8-b6a2dce1fbb5@linaro.org>
Hi, Krzysztof,
On 4/10/2022 11:18 AM, Krzysztof Kozlowski wrote:
> I am sorry, but you changed now a lot in the bindings and it looks
> entirely different. Things previously being correct now are wrong, so
> rather start from your old bindings...
Looks like I'm a bit confused... I use dual "compatible" in my real dts
and I realized that:
1. Therefore I have to use dual "compatible" in example too:
compatible = "sercomm,sc-partitions", "fixed-partitions";
2. When I'm trying to reuse "fixed-partitions" compatible from
fixed-partitions.yaml in my new .yaml I get "too long" errors.
Real dts:
Link:
https://github.com/openwrt/openwrt/blob/edcc1a9a734bb3fcdc9242025290d3f173e71b78/target/linux/ramips/dts/mt7621_beeline_smartbox-giga.dts#L79
So, I currently found another solution - to extend fixed-partitions.yaml
with "sercomm,sc-partitions". Is It ok from your side? Can I use this
code in v3?
diff --git
a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
index ea4cace6a955..9eebe39a57fb 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
@@ -19,7 +19,11 @@ maintainers:
properties:
compatible:
- const: fixed-partitions
+ oneOf:
+ - const: fixed-partitions
+ - items:
+ - const: sercomm,sc-partitions
+ - const: fixed-partitions
"#address-cells": true
@@ -27,7 +31,18 @@ properties:
patternProperties:
"@[0-9a-f]+$":
- $ref: "partition.yaml#"
+ allOf:
+ - $ref: "partition.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: sercomm,sc-partitions
+ then:
+ properties:
+ scpart-id:
+ description: Partition id in Sercomm partition map
+ $ref: /schemas/types.yaml#/definitions/uint32
required:
- "#address-cells"
@@ -119,3 +134,29 @@ examples:
};
};
};
+ - |
+ partitions {
+ compatible = "sercomm,sc-partitions", "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ scpart-id=<0>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "dynamic partition map";
+ reg = <0x100000 0x100000>;
+ scpart-id = <1>;
+ };
+
+ partition@200000 {
+ label = "Factory";
+ reg = <0x200000 0x100000>;
+ scpart-id = <2>;
+ read-only;
+ };
+ };
--
2.25.1
>> +
>> +additionalProperties: true
> This is wrong, why it became true?
You're right. Got it
> Best regards,
> Krzysztof
--
Best regards,
Mikhail
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2022-04-28 15:25 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-06 19:55 [PATCH v2 0/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser Mikhail Zhilkin
2022-04-06 19:59 ` [PATCH v2 1/2] " Mikhail Zhilkin
2022-04-07 7:48 ` Krzysztof Kozlowski
2022-04-09 12:26 ` Mikhail Zhilkin
2022-04-09 12:43 ` Krzysztof Kozlowski
2022-04-09 18:04 ` Mikhail Zhilkin
2022-04-09 18:17 ` Mikhail Zhilkin
2022-04-10 8:18 ` Krzysztof Kozlowski
2022-04-28 15:24 ` Mikhail Zhilkin [this message]
2022-04-29 6:46 ` Krzysztof Kozlowski
2022-04-29 15:26 ` Mikhail Zhilkin
2022-04-29 20:22 ` Krzysztof Kozlowski
2022-04-30 8:04 ` Mikhail Zhilkin
2022-04-30 14:35 ` Krzysztof Kozlowski
2022-04-30 18:54 ` Mikhail Zhilkin
2022-05-01 8:17 ` Krzysztof Kozlowski
2022-05-01 14:51 ` Mikhail Zhilkin
2022-05-01 16:17 ` Krzysztof Kozlowski
2022-05-02 5:42 ` Mikhail Zhilkin
2022-04-10 8:14 ` Krzysztof Kozlowski
2022-04-07 13:50 ` Rob Herring
2022-04-09 12:35 ` Mikhail Zhilkin
2022-04-09 12:49 ` Krzysztof Kozlowski
2022-04-10 6:54 ` Mikhail Zhilkin
2022-04-06 20:00 ` [PATCH v2 2/2] mtd: parsers: add support for Sercomm partitions Mikhail Zhilkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=25da3f43-c46e-8108-2da9-0e4f2b7cc1a4@gmail.com \
--to=csharper2005@gmail.com \
--cc=Karimdplay@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=drvlabo@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
--cc=x1@disroot.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).