From: <Tudor.Ambarus@microchip.com>
To: <michael@walle.cc>, <p.yadav@ti.com>, <miquel.raynal@bootlin.com>,
<richard@nod.at>, <vigneshr@ti.com>, <quic_c_sbhanu@quicinc.com>
Cc: <linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/2] mtd: spi-nor: introduce SNOR_ID3()
Date: Thu, 28 Jul 2022 03:24:36 +0000 [thread overview]
Message-ID: <41e6b74d-6973-60da-1556-82a1e879ffd4@microchip.com> (raw)
In-Reply-To: <160ddac1-6d0a-c922-1380-09e7823a285e@microchip.com>
On 7/19/22 08:57, Tudor.Ambarus@microchip.com wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On 5/10/22 17:02, Michael Walle wrote:
>
> Hi!
>
>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>
>> Up until now, flashes were defined by specifying the JEDEC ID, the
>> sector size and the number of sectors. This can be read by parsing the
>> SFDP, we don't have to specify it. Thus provide a new macro SNOR_ID3()
>> which just takes the JEDEC ID and implicitly set .parse_sfdp = true. All
>> new flashes which have SFDP should use this macro.
>
> I like the idea, but you need to refine it a bit.
> Your assumptions are true only for flashes that are compliant with SFDP revB or
> later because params->page_size is initialized by querying BFPT DWORD 11. I think
> it would be good to specify this in the comment section. Also, I think you introduce
> a bug in spi_nor_select_erase() when CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not
> selected. wanted_size will be zero, will you select an invalid erase type?
> Would you please resubmit?
>
> Thanks,
> ta
>
>>
>> Signed-off-by: Michael Walle <michael@walle.cc>
>> ---
>> drivers/mtd/spi-nor/core.c | 7 +++++--
>> drivers/mtd/spi-nor/core.h | 9 +++++++++
>> 2 files changed, 14 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
>> index 402b37cdbcea..29329ed0a934 100644
>> --- a/drivers/mtd/spi-nor/core.c
>> +++ b/drivers/mtd/spi-nor/core.c
>> @@ -2104,8 +2104,11 @@ static int spi_nor_select_pp(struct spi_nor *nor,
>> * spi_nor_select_uniform_erase() - select optimum uniform erase type
>> * @map: the erase map of the SPI NOR
>> * @wanted_size: the erase type size to search for. Contains the value of
>> - * info->sector_size or of the "small sector" size in case
>> - * CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is defined.
>> + * info->sector_size, the "small sector" size in case
>> + * CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is defined or 0 if
>> + * there is no information about the sector size. The
>> + * latter is the case if the flash parameters are parsed
>> + * solely by SFDP.
>> *
>> * Once the optimum uniform sector erase command is found, disable all the
>> * other.
>> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
>> index 61886868cd02..fab3038c4f4a 100644
>> --- a/drivers/mtd/spi-nor/core.h
>> +++ b/drivers/mtd/spi-nor/core.h
>> @@ -563,6 +563,15 @@ struct flash_info {
>> .n_regions = (_n_regions), \
>> },
>>
>> +#define SNOR_ID3(_jedec_id)
How about SFDP_ID3 and SFDP_ID6 instead?
\
>> + .id = { \
>> + ((_jedec_id) >> 16) & 0xff, \
>> + ((_jedec_id) >> 8) & 0xff, \
>> + (_jedec_id) & 0xff, \
>> + }, \
>> + .id_len = 3, \
>> + .parse_sfdp = true, \
>> +
>> #define PARSE_SFDP \
>> .parse_sfdp = true, \
>>
>> --
>> 2.30.2
>>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
--
Cheers,
ta
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2022-07-28 3:25 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-10 14:02 [PATCH 0/2] introduce SNOR_ID3() Michael Walle
2022-05-10 14:02 ` [PATCH 1/2] mtd: spi-nor: " Michael Walle
2022-06-05 15:00 ` Tom Fitzhenry
2022-07-12 7:23 ` Pratyush Yadav
2022-07-15 12:19 ` Biju Das
2022-07-19 5:57 ` Tudor.Ambarus
2022-07-19 7:07 ` Michael Walle
2022-07-19 7:33 ` Tudor.Ambarus
2022-07-19 7:57 ` Michael Walle
2022-07-19 8:30 ` Tudor.Ambarus
2022-07-28 3:24 ` Tudor.Ambarus [this message]
2022-07-28 13:12 ` Michael Walle
2022-07-28 13:31 ` Tudor.Ambarus
2022-07-28 13:56 ` Michael Walle
2022-05-10 14:02 ` [PATCH 2/2] mtd: spi-nor: winbond: use SNOR_ID3() for w25q512nwm Michael Walle
2022-07-12 8:40 ` Tudor.Ambarus
2022-07-18 7:21 ` Michael Walle
2022-07-18 7:25 ` Michael Walle
2022-07-19 6:00 ` Tudor.Ambarus
2022-07-19 7:02 ` Michael Walle
2022-07-19 7:24 ` Tudor.Ambarus
2022-05-10 14:03 ` [PATCH 0/2] mtd: spi-nor: introduce SNOR_ID3() Michael Walle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41e6b74d-6973-60da-1556-82a1e879ffd4@microchip.com \
--to=tudor.ambarus@microchip.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=michael@walle.cc \
--cc=miquel.raynal@bootlin.com \
--cc=p.yadav@ti.com \
--cc=quic_c_sbhanu@quicinc.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).