linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Takahiro Kuwano <tkuw584924@gmail.com>
To: Tudor Ambarus <tudor.ambarus@microchip.com>,
	p.yadav@ti.com, michael@walle.cc
Cc: miquel.raynal@bootlin.com, richard@nod.at,
	Bacem.Daassi@infineon.com, Takahiro.Kuwano@infineon.com,
	linux-mtd@lists.infradead.org
Subject: Re: [PATCH v14 0/8] mtd: spi-nor: Add support for Infineon s25hl-t/s25hs-t
Date: Wed, 4 May 2022 16:56:09 +0900	[thread overview]
Message-ID: <4fa61e90-89e1-ae68-abb6-ed50c5c09308@gmail.com> (raw)
In-Reply-To: <20220503081627.341870-1-tudor.ambarus@microchip.com>

On 5/3/2022 5:16 PM, Tudor Ambarus wrote:
> Hi, Takahiro,
> 
> Would you please test this series? It's only compiled tested on my side.
> 
> Cheers,
> ta
> 
Hi Tudor,

With the fix in patch 8/8, the series works well on my side too.

zynq> cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
s25hl512t
zynq> test_qspi.sh
6+0 records in
6+0 records out
6291456 bytes (6.0MB) copied, 0.221878 seconds, 27.0MB/s
Copied 6291456 bytes from qspi_test to address 0x00000000 in flash
Erased 6291456 bytes from address 0x00000000 in flash
Copied 6291456 bytes from address 0x00000000 in flash to qspi_read
0000000 ffff ffff ffff ffff ffff ffff ffff ffff
*
0600000
Copied 6291456 bytes from qspi_test to address 0x00000000 in flash
Copied 6291456 bytes from address 0x00000000 in flash to qspi_read
9ef41f0cece253ea6b6537ab19e0878841954444  qspi_test
9ef41f0cece253ea6b6537ab19e0878841954444  qspi_read


zynq> cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
s25hs512t
zynq> test_qspi.sh
6+0 records in
6+0 records out
6291456 bytes (6.0MB) copied, 0.223113 seconds, 26.9MB/s
Copied 6291456 bytes from qspi_test to address 0x00000000 in flash
Erased 6291456 bytes from address 0x00000000 in flash
Copied 6291456 bytes from address 0x00000000 in flash to qspi_read
0000000 ffff ffff ffff ffff ffff ffff ffff ffff
*
0600000
Copied 6291456 bytes from qspi_test to address 0x00000000 in flash
Copied 6291456 bytes from address 0x00000000 in flash to qspi_read
c1d4227d75ed34ca1b1282ade1996e4130e7af15  qspi_test
c1d4227d75ed34ca1b1282ade1996e4130e7af15  qspi_read


zynq> cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
s25hl01gt
zynq> test_qspi.sh
6+0 records in
6+0 records out
6291456 bytes (6.0MB) copied, 0.221797 seconds, 27.1MB/s
Copied 6291456 bytes from qspi_test to address 0x00000000 in flash
Erased 6291456 bytes from address 0x00000000 in flash
Copied 6291456 bytes from address 0x00000000 in flash to qspi_read
0000000 ffff ffff ffff ffff ffff ffff ffff ffff
*
0600000
Copied 6291456 bytes from qspi_test to address 0x00000000 in flash
Copied 6291456 bytes from address 0x00000000 in flash to qspi_read
e4d22bbd91abe16d43dc4a0539ac49d653e99611  qspi_test
e4d22bbd91abe16d43dc4a0539ac49d653e99611  qspi_read


zynq> cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
s25hs01gt
zynq> test_qspi.sh
6+0 records in
6+0 records out
6291456 bytes (6.0MB) copied, 0.221968 seconds, 27.0MB/s
Copied 6291456 bytes from qspi_test to address 0x00000000 in flash
Erased 6291456 bytes from address 0x00000000 in flash
Copied 6291456 bytes from address 0x00000000 in flash to qspi_read
0000000 ffff ffff ffff ffff ffff ffff ffff ffff
*
0600000
Copied 6291456 bytes from qspi_test to address 0x00000000 in flash
Copied 6291456 bytes from address 0x00000000 in flash to qspi_read
43cf65d1b77dc4bdc31ca002166f150a97843cb2  qspi_test
43cf65d1b77dc4bdc31ca002166f150a97843cb2  qspi_read


Thanks a lot for your help!
Takahiro
 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  parent reply	other threads:[~2022-05-04  7:56 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-03  8:16 [PATCH v14 0/8] mtd: spi-nor: Add support for Infineon s25hl-t/s25hs-t Tudor Ambarus
2022-05-03  8:16 ` [PATCH v14 1/8] mtd: spi-nor: s/addr_width/addr_nbytes Tudor Ambarus
2022-05-03  8:16 ` [PATCH v14 2/8] mtd: spi-nor: core: Shrink the storage size of the flash_info's addr_nbytes Tudor Ambarus
2022-05-03  8:27   ` Tudor.Ambarus
2022-05-03  8:35     ` Tudor.Ambarus
2022-05-03  8:16 ` [PATCH v14 3/8] mtd: spi-nor: sfdp: Clarify that nor->read_{opcode, dummy} are uninitialized Tudor Ambarus
2022-05-03  8:16 ` [PATCH v14 4/8] mtd: spi-nor: Do not change nor->addr_nbytes at SFDP parsing time Tudor Ambarus
2022-05-03  8:16 ` [PATCH v14 5/8] mtd: spi-nor: core: Couple the number of address bytes with the address mode Tudor Ambarus
2022-05-03  8:16 ` [PATCH v14 6/8] mtd: spi-nor: Retain nor->addr_width at 4BAIT parse Tudor Ambarus
2022-05-03  8:16 ` [PATCH v14 7/8] mtd: spi-nor: spansion: Add local function to discover page size Tudor Ambarus
2022-05-03  8:16 ` [PATCH v14 8/8] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups Tudor Ambarus
2022-05-04  7:38   ` Takahiro Kuwano
2022-05-04  7:47     ` Tudor.Ambarus
2022-05-04  7:59       ` Takahiro Kuwano
2022-05-04  7:56 ` Takahiro Kuwano [this message]
2022-05-04  9:55   ` [PATCH v14 0/8] mtd: spi-nor: Add support for Infineon s25hl-t/s25hs-t Tudor.Ambarus
2022-05-09  2:37     ` Takahiro Kuwano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4fa61e90-89e1-ae68-abb6-ed50c5c09308@gmail.com \
    --to=tkuw584924@gmail.com \
    --cc=Bacem.Daassi@infineon.com \
    --cc=Takahiro.Kuwano@infineon.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=michael@walle.cc \
    --cc=miquel.raynal@bootlin.com \
    --cc=p.yadav@ti.com \
    --cc=richard@nod.at \
    --cc=tudor.ambarus@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).