Linux-mtd Archive on lore.kernel.org
 help / color / Atom feed
From: Vignesh Raghavendra <vigneshr@ti.com>
To: <Tudor.Ambarus@microchip.com>, <boris.brezillon@collabora.com>,
	<marek.vasut@gmail.com>, <miquel.raynal@bootlin.com>,
	<richard@nod.at>, <linux-mtd@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [RESEND PATCH v3 19/20] mtd: spi-nor: Introduce spi_nor_get_flash_info()
Date: Tue, 27 Aug 2019 13:07:41 +0530
Message-ID: <5c3a96a8-228a-3659-d59e-fb3e3d603bb2@ti.com> (raw)
In-Reply-To: <20190826120821.16351-20-tudor.ambarus@microchip.com>



On 26/08/19 5:39 PM, Tudor.Ambarus@microchip.com wrote:
> From: Tudor Ambarus <tudor.ambarus@microchip.com>
> 
> Dedicate a function for getting the pointer to the flash_info
> const struct. Trim a bit the spi_nor_scan() huge function.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
> ---

Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>

Regards
Vignesh

> v3: no changes
> 
>  drivers/mtd/spi-nor/spi-nor.c | 76 +++++++++++++++++++++++++------------------
>  1 file changed, 44 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index d13317d1f372..ec70b58294ec 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -4766,10 +4766,50 @@ static int spi_nor_set_addr_width(struct spi_nor *nor)
>  	return 0;
>  }
>  
> +static const struct flash_info *spi_nor_get_flash_info(struct spi_nor *nor,
> +						       const char *name)
> +{
> +	const struct flash_info *info = NULL;
> +
> +	if (name)
> +		info = spi_nor_match_id(name);
> +	/* Try to auto-detect if chip name wasn't specified or not found */
> +	if (!info)
> +		info = spi_nor_read_id(nor);
> +	if (IS_ERR_OR_NULL(info))
> +		return ERR_PTR(-ENOENT);
> +
> +	/*
> +	 * If caller has specified name of flash model that can normally be
> +	 * detected using JEDEC, let's verify it.
> +	 */
> +	if (name && info->id_len) {
> +		const struct flash_info *jinfo;
> +
> +		jinfo = spi_nor_read_id(nor);
> +		if (IS_ERR(jinfo)) {
> +			return jinfo;
> +		} else if (jinfo != info) {
> +			/*
> +			 * JEDEC knows better, so overwrite platform ID. We
> +			 * can't trust partitions any longer, but we'll let
> +			 * mtd apply them anyway, since some partitions may be
> +			 * marked read-only, and we don't want to lose that
> +			 * information, even if it's not 100% accurate.
> +			 */
> +			dev_warn(nor->dev, "found %s, expected %s\n",
> +				 jinfo->name, info->name);
> +			info = jinfo;
> +		}
> +	}
> +
> +	return info;
> +}
> +
>  int spi_nor_scan(struct spi_nor *nor, const char *name,
>  		 const struct spi_nor_hwcaps *hwcaps)
>  {
> -	const struct flash_info *info = NULL;
> +	const struct flash_info *info;
>  	struct device *dev = nor->dev;
>  	struct mtd_info *mtd = &nor->mtd;
>  	struct device_node *np = spi_nor_get_flash_node(nor);
> @@ -4800,37 +4840,9 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
>  	if (!nor->bouncebuf)
>  		return -ENOMEM;
>  
> -	if (name)
> -		info = spi_nor_match_id(name);
> -	/* Try to auto-detect if chip name wasn't specified or not found */
> -	if (!info)
> -		info = spi_nor_read_id(nor);
> -	if (IS_ERR_OR_NULL(info))
> -		return -ENOENT;
> -
> -	/*
> -	 * If caller has specified name of flash model that can normally be
> -	 * detected using JEDEC, let's verify it.
> -	 */
> -	if (name && info->id_len) {
> -		const struct flash_info *jinfo;
> -
> -		jinfo = spi_nor_read_id(nor);
> -		if (IS_ERR(jinfo)) {
> -			return PTR_ERR(jinfo);
> -		} else if (jinfo != info) {
> -			/*
> -			 * JEDEC knows better, so overwrite platform ID. We
> -			 * can't trust partitions any longer, but we'll let
> -			 * mtd apply them anyway, since some partitions may be
> -			 * marked read-only, and we don't want to lose that
> -			 * information, even if it's not 100% accurate.
> -			 */
> -			dev_warn(dev, "found %s, expected %s\n",
> -				 jinfo->name, info->name);
> -			info = jinfo;
> -		}
> -	}
> +	info = spi_nor_get_flash_info(nor, name);
> +	if (IS_ERR(info))
> +		return PTR_ERR(info);
>  
>  	nor->info = info;
>  
> 

-- 
Regards
Vignesh

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply index

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-26 12:08 [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 01/20] mtd: spi-nor: Regroup flash parameter and settings Tudor.Ambarus
2019-08-27  4:21   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 02/20] mtd: spi-nor: Use nor->params Tudor.Ambarus
2019-08-27  4:31   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 03/20] mtd: spi-nor: Drop quad_enable() from 'struct spi-nor' Tudor.Ambarus
2019-08-27  4:47   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 04/20] mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter' Tudor.Ambarus
2019-08-26 12:38   ` Boris Brezillon
2019-08-27  5:39   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 05/20] mtd: spi-nor: Add default_init() hook to tweak flash parameters Tudor.Ambarus
2019-08-27  5:48   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 06/20] mtd: spi-nor: Add a default_init() fixup hook for gd25q256 Tudor.Ambarus
2019-08-27  5:48   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 07/20] mtd: spi_nor: Move manufacturer quad_enable() in ->default_init() Tudor.Ambarus
2019-08-27  5:54   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 08/20] mtd: spi-nor: Split spi_nor_init_params() Tudor.Ambarus
2019-08-27  6:00   ` Vignesh Raghavendra
2019-08-27  7:01     ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 09/20] mtd: spi-nor: Create a ->set_4byte() method Tudor.Ambarus
2019-08-27  6:07   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 10/20] mtd: spi-nor: Rework the SPI NOR lock/unlock logic Tudor.Ambarus
2019-08-27  6:36   ` Vignesh Raghavendra
2019-08-27  6:58     ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 11/20] mtd: spi-nor: Add post_sfdp() hook to tweak flash config Tudor.Ambarus
2019-08-27  7:08   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 12/20] mtd: spi-nor: Add spansion_post_sfdp_fixups() Tudor.Ambarus
2019-08-27  7:10   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 13/20] mtd: spi-nor: Add a ->convert_addr() method Tudor.Ambarus
2019-08-27  7:13   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 14/20] mtd: spi_nor: Add a ->setup() method Tudor.Ambarus
2019-08-26 12:40   ` Boris Brezillon
2019-08-26 13:38     ` Schrempf Frieder
2019-08-26 14:02       ` Boris Brezillon
2019-08-26 14:37         ` Schrempf Frieder
2019-08-27  7:16   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 15/20] mtd: spi-nor: Add s3an_post_sfdp_fixups() Tudor.Ambarus
2019-08-27  7:18   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 16/20] mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag Tudor.Ambarus
2019-08-27  7:48   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 17/20] mtd: spi-nor: Bring flash params init together Tudor.Ambarus
2019-08-27  7:35   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 18/20] mtd: spi_nor: Introduce spi_nor_set_addr_width() Tudor.Ambarus
2019-08-27  7:37   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 19/20] mtd: spi-nor: Introduce spi_nor_get_flash_info() Tudor.Ambarus
2019-08-27  7:37   ` Vignesh Raghavendra [this message]
2019-08-26 12:09 ` [RESEND RFC PATCH v3 20/20] mtd: spi-nor: Rework the disabling of block write protection Tudor.Ambarus
2019-08-26 12:49   ` Boris Brezillon
2019-08-27  5:33 ` [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core Vignesh Raghavendra
2019-08-28 10:18 ` Tudor.Ambarus

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5c3a96a8-228a-3659-d59e-fb3e3d603bb2@ti.com \
    --to=vigneshr@ti.com \
    --cc=Tudor.Ambarus@microchip.com \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mtd Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mtd/0 linux-mtd/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mtd linux-mtd/ https://lore.kernel.org/linux-mtd \
		linux-mtd@lists.infradead.org
	public-inbox-index linux-mtd

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-mtd


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git