[PATCH v16 0/8] mtd: spi-nor: Add support for Infineon s25hl-t/s25hs-t

[PATCH v16 0/8] mtd: spi-nor: Add support for Infineon s25hl-t/s25hs-t

[tkuw584924]

From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>

The S25HL-T/S25HS-T family is the Infineon SEMPER Flash with Quad SPI.

The datasheets can be found in the following link.
https://www.infineon.com/dgdl/Infineon-S25HS256T_S25HS512T_S25HS01GT_S25HL256T_S25HL512T_S25HL01GT_256-Mb_(32-MB)_512-Mb_(64-MB)_1-Gb_(128-MB)_HS-T_(1.8-V)_HL-T_(3.0-V)_Semper_Flash_with_Quad_SPI-DataSheet-v02_00-EN.pdf?fileId=8ac78c8c7d0d8da4017d0ee674b86ee3&da=t

Device ID, SFDP, and test script output:
------------------------------------------------------------
zynq> cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
s25hl512t
zynq> cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id
342a1a0f0390
zynq> cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer
spansion
zynq> xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
53464450080103ff00000114000100ff84000102500100ff81000116c801
00ff8700011c580100ffffffffffffffffffffffffffffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
ffffffffffffffffffffffffffffffffe720faffffffff1f48eb086b00ff
88bbfeffffffffff00ffffff48eb0c2000ff00ff12d823faff8b82e7ffe3
ec031c608a857a75f766805c8cd6ddfff938f8a1000000000000bc000000
0000f7f5ffff7b920ffe21ffffdc0000800000000000c0ffc3ebc8ffe3eb
00650090060500a10065009600650095716503d0716503d000000000b02e
000088a489aa716503967165039600000000000000000000000000000000
000000000000000000000000000000000000000000000000716505d57165
05d50000a015fc65ff0804008000fc65ff4002008000fd65ff0402008000
fe0002fff1ff0100f8ff0100f8fffb03fe0302fff8fffb03f8ff0100f1ff
0100fe0104fff1ff0000f8ff0200f8fff703f8ff0200f1ff0000ff0400ff
f8ffff03
zynq> md5sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
8a0aa90112e154ae3a797df2c211ef61  /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
zynq> test_qspi.sh
6+0 records in
6+0 records out
6291456 bytes (6.0MB) copied, 0.230748 seconds, 26.0MB/s
Copied 6291456 bytes from qspi_test to address 0x00000000 in flash
Erased 6291456 bytes from address 0x00000000 in flash
Copied 6291456 bytes from address 0x00000000 in flash to qspi_read
0000000 ffff ffff ffff ffff ffff ffff ffff ffff
*
0600000
Copied 6291456 bytes from qspi_test to address 0x00000000 in flash
Copied 6291456 bytes from address 0x00000000 in flash to qspi_read
8fd5e1d95c3a5b8d7d66ade561f51fe5257897ff  qspi_test
8fd5e1d95c3a5b8d7d66ade561f51fe5257897ff  qspi_read
------------------------------------------------------------

------------------------------------------------------------
zynq> cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
s25hs512t
zynq> cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id
342b1a0f0390
zynq> cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer
spansion
zynq> xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp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zynq> md5sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
f17d9e784602187a0933edec3688e30f  /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
zynq> test_qspi.sh
6+0 records in
6+0 records out
6291456 bytes (6.0MB) copied, 0.230827 seconds, 26.0MB/s
Copied 6291456 bytes from qspi_test to address 0x00000000 in flash
Erased 6291456 bytes from address 0x00000000 in flash
Copied 6291456 bytes from address 0x00000000 in flash to qspi_read
0000000 ffff ffff ffff ffff ffff ffff ffff ffff
*
0600000
Copied 6291456 bytes from qspi_test to address 0x00000000 in flash
Copied 6291456 bytes from address 0x00000000 in flash to qspi_read
3c4cc1be627a88da0364b2a866fbb6ac04dba80e  qspi_test
3c4cc1be627a88da0364b2a866fbb6ac04dba80e  qspi_read
------------------------------------------------------------

------------------------------------------------------------
zynq> cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
s25hl01gt
zynq> cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id
342a1b0f0390
zynq> cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer
spansion
zynq> xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp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zynq> md5sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
1ad5a0d7d7e0e656986c1e678c416a7e  /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
zynq> test_qspi.sh
6+0 records in
6+0 records out
6291456 bytes (6.0MB) copied, 0.230878 seconds, 26.0MB/s
Copied 6291456 bytes from qspi_test to address 0x00000000 in flash
Erased 6291456 bytes from address 0x00000000 in flash
Copied 6291456 bytes from address 0x00000000 in flash to qspi_read
0000000 ffff ffff ffff ffff ffff ffff ffff ffff
*
0600000
Copied 6291456 bytes from qspi_test to address 0x00000000 in flash
Copied 6291456 bytes from address 0x00000000 in flash to qspi_read
50b8cc948f8b05fa5650a6d0ba74be8f95ff3332  qspi_test
50b8cc948f8b05fa5650a6d0ba74be8f95ff3332  qspi_read
------------------------------------------------------------

------------------------------------------------------------
zynq> cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
s25hs01gt
zynq> cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id
342b1b0f0390
zynq> cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer
spansion
zynq> xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp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zynq> md5sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
1ad5a0d7d7e0e656986c1e678c416a7e  /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
zynq> test_qspi.sh
6+0 records in
6+0 records out
6291456 bytes (6.0MB) copied, 0.230712 seconds, 26.0MB/s
Copied 6291456 bytes from qspi_test to address 0x00000000 in flash
Erased 6291456 bytes from address 0x00000000 in flash
Copied 6291456 bytes from address 0x00000000 in flash to qspi_read
0000000 ffff ffff ffff ffff ffff ffff ffff ffff
*
0600000
Copied 6291456 bytes from qspi_test to address 0x00000000 in flash
Copied 6291456 bytes from address 0x00000000 in flash to qspi_read
e9515a880d836d9fdfa8b2b7c870825fd8300cc1  qspi_test
e9515a880d836d9fdfa8b2b7c870825fd8300cc1  qspi_read
------------------------------------------------------------

Changes in v16:
  - stop restoring read_opcode, read_dummy and addr_nbytes to uninitialized
    state at SFDP parsing time

Changes in v15:
  - add missing read any reg call in volatile quad enable method (patch 8/8)

Changes in v14:
  - add prerequisite patches for s25hl-t/s25hs-t addition.
  - squash volatile quad enable method to the patch that adds the flashes
    to avoid unused function warning.

Changes in v13:
  - Remove patch, Call set_4byte_addr_mode() before spi_nor_quad_enalbe()
  - Remove patch, Rename local macro
  - Use 3-byte address width in cypress_nor_quad_enable_volatile()
  - Add post_sfdp to fix 3 byte erase opcode in 4BAIT

Changes in v12:
  - Rebase on top of Tudor's series
    https://patchwork.ozlabs.org/project/linux-mtd/list/?series=295933
    https://patchwork.ozlabs.org/project/linux-mtd/list/?series=294533
  - New patch: Retain nor->addr_width at 4BAIT parse
  - New patch: Call set_4byte_addr_mode() before spi_nor_quad_enalbe()
  - New patch: Rename local macro
  
Changes in v11:
  - Rebase on top of Tudor's series
    https://patchwork.ozlabs.org/project/linux-mtd/list/?series=294490
  - Remove 'nor->info->addr_width for SMPT parse' patch
  
Changes in v10:
  - Rebase to v5.18-rc1
  - Remove dependencies on other series
  - Use nor->info->addr_width for SMPT parse
  - Add a local function for page size discovery
  - Clean up volatile QE function
  
Changes in v9:
  - Rebase to v5.17-rc6
  - Rename function and macro per mwalle's series
  - Fix some issues in ID table and fixup hook

Changes in v8:
  - Rebase to v5.17-rc4
  - Use spi_nor_read_reg and spi_nor_write_reg()
  
Changes in v7:
  - Some changes were missing in v6 patch. Fix it

Changes in v6:
  - Remove 2Gb dual die package parts and related changes to split mulit
    die package support into another series of patches  

Changes in v5:
  - Fix 'if (ret == 1)' to 'if (ret < 0)' in spansion_read_any_reg()
  - Add NO_CHIP_ERASE flag to S25HL02GT and S25HS02GT

Changes in v4:
  - Reword 'legacy' to 'default'
  - Rename spi_nor_read() to spi_nor_default_ready()
  - Fix dummy cycle calculation in spansion_read_any_reg()
  - Modify comment for spansion_write_any_reg()
  - Merge block comments about SMPT in s25hx_t_post_sfdp_fixups()
  - Remove USE_CLSR flags from S25HL02GT and S25HS02GT

Changes in v3:
  - Split into multiple patches
  - Remove S25HL256T and S25HS256T
  - Add S25HL02GT and S25HS02GT 
  - Add support for multi-die package parts support
  - Cleanup Read/Write Any Register implementation
  - Remove erase_map fix for top/split sector layout
  - Set ECC data unit size (16B) to writesize 

Changes in v2:
  - Remove SPI_NOR_SKIP_SFDP flag and clean up related fixups
  - Check CFR3V[4] to determine page_size instead of force 512B
  - Depend on the patchset below to support non-uniform sector layout
    https://lore.kernel.org/linux-mtd/cover.1601612872.git.Takahiro.Kuwano@infineon.com/*** BLURB HERE ***


Takahiro Kuwano (7):
  mtd: spi-nor: s/addr_width/addr_nbytes
  mtd: spi-nor: Do not change nor->addr_nbytes at SFDP  parsing time
  mtd: spi-nor: core: Return error code from set_4byte_addr_mode()
  mtd: spi-nor: core: Couple the number of address  bytes with the
    address mode
  mtd: spi-nor: Do not change nor->params->addr_nbytes at 4BAIT parsing
    time
  mtd: spi-nor: spansion: Add local function to discover page size
  mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups

Tudor Ambarus (1):
  mtd: spi-nor: core: Shrink the storage size of the flash_info's
    addr_nbytes

 drivers/mtd/spi-nor/controllers/hisi-sfc.c  |   2 +-
 drivers/mtd/spi-nor/controllers/nxp-spifi.c |   8 +-
 drivers/mtd/spi-nor/core.c                  | 155 +++++++++--------
 drivers/mtd/spi-nor/core.h                  |  14 +-
 drivers/mtd/spi-nor/issi.c                  |   2 +-
 drivers/mtd/spi-nor/otp.c                   |  12 +-
 drivers/mtd/spi-nor/sfdp.c                  |  31 ++--
 drivers/mtd/spi-nor/spansion.c              | 183 +++++++++++++++++---
 drivers/mtd/spi-nor/xilinx.c                |   2 +-
 include/linux/mtd/spi-nor.h                 |   4 +-
 10 files changed, 280 insertions(+), 133 deletions(-)

-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v16 1/8] mtd: spi-nor: s/addr_width/addr_nbytes

[tkuw584924]

From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>

Address width was an unfortunate name, as it means the number of IO lines
used for the address, whereas in the code it is used as the number of
address bytes. s/addr_width/addr_nbytes throughout the entire SPI NOR
framework.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
---
Changes in v16:
  - Remove drivers/mtd/spi-nor/controllers/aspeed-smc.c

 drivers/mtd/spi-nor/controllers/hisi-sfc.c  |  2 +-
 drivers/mtd/spi-nor/controllers/nxp-spifi.c |  8 ++--
 drivers/mtd/spi-nor/core.c                  | 46 ++++++++++-----------
 drivers/mtd/spi-nor/core.h                  | 12 +++---
 drivers/mtd/spi-nor/issi.c                  |  2 +-
 drivers/mtd/spi-nor/otp.c                   | 12 +++---
 drivers/mtd/spi-nor/sfdp.c                  | 32 +++++++-------
 drivers/mtd/spi-nor/xilinx.c                |  2 +-
 include/linux/mtd/spi-nor.h                 |  4 +-
 9 files changed, 60 insertions(+), 60 deletions(-)

diff --git a/drivers/mtd/spi-nor/controllers/hisi-sfc.c b/drivers/mtd/spi-nor/controllers/hisi-sfc.c
index 94a969185ceb..5070d72835ec 100644
--- a/drivers/mtd/spi-nor/controllers/hisi-sfc.c
+++ b/drivers/mtd/spi-nor/controllers/hisi-sfc.c
@@ -237,7 +237,7 @@ static int hisi_spi_nor_dma_transfer(struct spi_nor *nor, loff_t start_off,
 	reg = readl(host->regbase + FMC_CFG);
 	reg &= ~(FMC_CFG_OP_MODE_MASK | SPI_NOR_ADDR_MODE_MASK);
 	reg |= FMC_CFG_OP_MODE_NORMAL;
-	reg |= (nor->addr_width == 4) ? SPI_NOR_ADDR_MODE_4BYTES
+	reg |= (nor->addr_nbytes == 4) ? SPI_NOR_ADDR_MODE_4BYTES
 		: SPI_NOR_ADDR_MODE_3BYTES;
 	writel(reg, host->regbase + FMC_CFG);
 
diff --git a/drivers/mtd/spi-nor/controllers/nxp-spifi.c b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
index 9032b9ab2eaf..ab3990e6ac25 100644
--- a/drivers/mtd/spi-nor/controllers/nxp-spifi.c
+++ b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
@@ -203,7 +203,7 @@ static ssize_t nxp_spifi_write(struct spi_nor *nor, loff_t to, size_t len,
 	      SPIFI_CMD_DATALEN(len) |
 	      SPIFI_CMD_FIELDFORM_ALL_SERIAL |
 	      SPIFI_CMD_OPCODE(nor->program_opcode) |
-	      SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
+	      SPIFI_CMD_FRAMEFORM(spifi->nor.addr_nbytes + 1);
 	writel(cmd, spifi->io_base + SPIFI_CMD);
 
 	for (i = 0; i < len; i++)
@@ -230,7 +230,7 @@ static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs)
 
 	cmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL |
 	      SPIFI_CMD_OPCODE(nor->erase_opcode) |
-	      SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
+	      SPIFI_CMD_FRAMEFORM(spifi->nor.addr_nbytes + 1);
 	writel(cmd, spifi->io_base + SPIFI_CMD);
 
 	return nxp_spifi_wait_for_cmd(spifi);
@@ -252,12 +252,12 @@ static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi)
 	}
 
 	/* Memory mode supports address length between 1 and 4 */
-	if (spifi->nor.addr_width < 1 || spifi->nor.addr_width > 4)
+	if (spifi->nor.addr_nbytes < 1 || spifi->nor.addr_nbytes > 4)
 		return -EINVAL;
 
 	spifi->mcmd |= SPIFI_CMD_OPCODE(spifi->nor.read_opcode) |
 		       SPIFI_CMD_INTLEN(spifi->nor.read_dummy / 8) |
-		       SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
+		       SPIFI_CMD_FRAMEFORM(spifi->nor.addr_nbytes + 1);
 
 	return 0;
 }
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 502967c76c5f..14b6b1f38b69 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -38,7 +38,7 @@
  */
 #define CHIP_ERASE_2MB_READY_WAIT_JIFFIES	(40UL * HZ)
 
-#define SPI_NOR_MAX_ADDR_WIDTH	4
+#define SPI_NOR_MAX_ADDR_NBYTES	4
 
 #define SPI_NOR_SRST_SLEEP_MIN 200
 #define SPI_NOR_SRST_SLEEP_MAX 400
@@ -198,7 +198,7 @@ static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t from,
 {
 	struct spi_mem_op op =
 		SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 0),
-			   SPI_MEM_OP_ADDR(nor->addr_width, from, 0),
+			   SPI_MEM_OP_ADDR(nor->addr_nbytes, from, 0),
 			   SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
 			   SPI_MEM_OP_DATA_IN(len, buf, 0));
 	bool usebouncebuf;
@@ -262,7 +262,7 @@ static ssize_t spi_nor_spimem_write_data(struct spi_nor *nor, loff_t to,
 {
 	struct spi_mem_op op =
 		SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 0),
-			   SPI_MEM_OP_ADDR(nor->addr_width, to, 0),
+			   SPI_MEM_OP_ADDR(nor->addr_nbytes, to, 0),
 			   SPI_MEM_OP_NO_DUMMY,
 			   SPI_MEM_OP_DATA_OUT(len, buf, 0));
 	ssize_t nbytes;
@@ -1113,7 +1113,7 @@ int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
 	if (nor->spimem) {
 		struct spi_mem_op op =
 			SPI_NOR_SECTOR_ERASE_OP(nor->erase_opcode,
-						nor->addr_width, addr);
+						nor->addr_nbytes, addr);
 
 		spi_nor_spimem_setup_op(nor, &op, nor->write_proto);
 
@@ -1126,13 +1126,13 @@ int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
 	 * Default implementation, if driver doesn't have a specialized HW
 	 * control
 	 */
-	for (i = nor->addr_width - 1; i >= 0; i--) {
+	for (i = nor->addr_nbytes - 1; i >= 0; i--) {
 		nor->bouncebuf[i] = addr & 0xff;
 		addr >>= 8;
 	}
 
 	return spi_nor_controller_ops_write_reg(nor, nor->erase_opcode,
-						nor->bouncebuf, nor->addr_width);
+						nor->bouncebuf, nor->addr_nbytes);
 }
 
 /**
@@ -2249,9 +2249,9 @@ static int spi_nor_default_setup(struct spi_nor *nor,
 	return 0;
 }
 
-static int spi_nor_set_addr_width(struct spi_nor *nor)
+static int spi_nor_set_addr_nbytes(struct spi_nor *nor)
 {
-	if (nor->addr_width) {
+	if (nor->addr_nbytes) {
 		/* already configured from SFDP */
 	} else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR) {
 		/*
@@ -2266,26 +2266,26 @@ static int spi_nor_set_addr_width(struct spi_nor *nor)
 		 * Force all 8D-8D-8D flashes to use an address width of 4 to
 		 * avoid this situation.
 		 */
-		nor->addr_width = 4;
-	} else if (nor->info->addr_width) {
-		nor->addr_width = nor->info->addr_width;
+		nor->addr_nbytes = 4;
+	} else if (nor->info->addr_nbytes) {
+		nor->addr_nbytes = nor->info->addr_nbytes;
 	} else {
-		nor->addr_width = 3;
+		nor->addr_nbytes = 3;
 	}
 
-	if (nor->addr_width == 3 && nor->params->size > 0x1000000) {
+	if (nor->addr_nbytes == 3 && nor->params->size > 0x1000000) {
 		/* enable 4-byte addressing if the device exceeds 16MiB */
-		nor->addr_width = 4;
+		nor->addr_nbytes = 4;
 	}
 
-	if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
+	if (nor->addr_nbytes > SPI_NOR_MAX_ADDR_NBYTES) {
 		dev_dbg(nor->dev, "address width is too large: %u\n",
-			nor->addr_width);
+			nor->addr_nbytes);
 		return -EINVAL;
 	}
 
 	/* Set 4byte opcodes when possible. */
-	if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES &&
+	if (nor->addr_nbytes == 4 && nor->flags & SNOR_F_4B_OPCODES &&
 	    !(nor->flags & SNOR_F_HAS_4BAIT))
 		spi_nor_set_4byte_opcodes(nor);
 
@@ -2304,7 +2304,7 @@ static int spi_nor_setup(struct spi_nor *nor,
 	if (ret)
 		return ret;
 
-	return spi_nor_set_addr_width(nor);
+	return spi_nor_set_addr_nbytes(nor);
 }
 
 /**
@@ -2497,7 +2497,7 @@ static void spi_nor_sfdp_init_params_deprecated(struct spi_nor *nor)
 
 	if (spi_nor_parse_sfdp(nor)) {
 		memcpy(nor->params, &sfdp_params, sizeof(*nor->params));
-		nor->addr_width = 0;
+		nor->addr_nbytes = 0;
 		nor->flags &= ~SNOR_F_4B_OPCODES;
 	}
 }
@@ -2718,7 +2718,7 @@ static int spi_nor_init(struct spi_nor *nor)
 	     nor->flags & SNOR_F_SWP_IS_VOLATILE))
 		spi_nor_try_unlock_all(nor);
 
-	if (nor->addr_width == 4 &&
+	if (nor->addr_nbytes == 4 &&
 	    nor->read_proto != SNOR_PROTO_8_8_8_DTR &&
 	    !(nor->flags & SNOR_F_4B_OPCODES)) {
 		/*
@@ -2845,7 +2845,7 @@ static void spi_nor_put_device(struct mtd_info *mtd)
 void spi_nor_restore(struct spi_nor *nor)
 {
 	/* restore the addressing mode */
-	if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES) &&
+	if (nor->addr_nbytes == 4 && !(nor->flags & SNOR_F_4B_OPCODES) &&
 	    nor->flags & SNOR_F_BROKEN_RESET)
 		nor->params->set_4byte_addr_mode(nor, false);
 
@@ -3030,7 +3030,7 @@ static int spi_nor_create_read_dirmap(struct spi_nor *nor)
 {
 	struct spi_mem_dirmap_info info = {
 		.op_tmpl = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 0),
-				      SPI_MEM_OP_ADDR(nor->addr_width, 0, 0),
+				      SPI_MEM_OP_ADDR(nor->addr_nbytes, 0, 0),
 				      SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
 				      SPI_MEM_OP_DATA_IN(0, NULL, 0)),
 		.offset = 0,
@@ -3061,7 +3061,7 @@ static int spi_nor_create_write_dirmap(struct spi_nor *nor)
 {
 	struct spi_mem_dirmap_info info = {
 		.op_tmpl = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 0),
-				      SPI_MEM_OP_ADDR(nor->addr_width, 0, 0),
+				      SPI_MEM_OP_ADDR(nor->addr_nbytes, 0, 0),
 				      SPI_MEM_OP_NO_DUMMY,
 				      SPI_MEM_OP_DATA_OUT(0, NULL, 0)),
 		.offset = 0,
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 3f841ec36e56..cd76296d0060 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -84,9 +84,9 @@
 		   SPI_MEM_OP_NO_DUMMY,					\
 		   SPI_MEM_OP_NO_DATA)
 
-#define SPI_NOR_SECTOR_ERASE_OP(opcode, addr_width, addr)		\
+#define SPI_NOR_SECTOR_ERASE_OP(opcode, addr_nbytes, addr)		\
 	SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0),				\
-		   SPI_MEM_OP_ADDR(addr_width, addr, 0),		\
+		   SPI_MEM_OP_ADDR(addr_nbytes, addr, 0),		\
 		   SPI_MEM_OP_NO_DUMMY,					\
 		   SPI_MEM_OP_NO_DATA)
 
@@ -429,7 +429,7 @@ struct spi_nor_fixups {
  *                  isn't necessarily called a "sector" by the vendor.
  * @n_sectors:      the number of sectors.
  * @page_size:      the flash's page size.
- * @addr_width:     the flash's address width.
+ * @addr_nbytes:    number of address bytes to send.
  *
  * @parse_sfdp:     true when flash supports SFDP tables. The false value has no
  *                  meaning. If one wants to skip the SFDP tables, one should
@@ -488,7 +488,7 @@ struct flash_info {
 	unsigned sector_size;
 	u16 n_sectors;
 	u16 page_size;
-	u16 addr_width;
+	u16 addr_nbytes;
 
 	bool parse_sfdp;
 	u16 flags;
@@ -550,11 +550,11 @@ struct flash_info {
 		.n_sectors = (_n_sectors),				\
 		.page_size = 256,					\
 
-#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width)	\
+#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_nbytes)	\
 		.sector_size = (_sector_size),				\
 		.n_sectors = (_n_sectors),				\
 		.page_size = (_page_size),				\
-		.addr_width = (_addr_width),				\
+		.addr_nbytes = (_addr_nbytes),				\
 		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,		\
 
 #define OTP_INFO(_len, _n_regions, _base, _offset)			\
diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index c012bc2486e1..23e331cc42a9 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -20,7 +20,7 @@ is25lp256_post_bfpt_fixups(struct spi_nor *nor,
 	 */
 	if ((bfpt->dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) ==
 		BFPT_DWORD1_ADDRESS_BYTES_3_ONLY)
-		nor->addr_width = 4;
+		nor->addr_nbytes = 4;
 
 	return 0;
 }
diff --git a/drivers/mtd/spi-nor/otp.c b/drivers/mtd/spi-nor/otp.c
index fa63d8571218..00ab0d2d6d2f 100644
--- a/drivers/mtd/spi-nor/otp.c
+++ b/drivers/mtd/spi-nor/otp.c
@@ -35,13 +35,13 @@
  */
 int spi_nor_otp_read_secr(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf)
 {
-	u8 addr_width, read_opcode, read_dummy;
+	u8 addr_nbytes, read_opcode, read_dummy;
 	struct spi_mem_dirmap_desc *rdesc;
 	enum spi_nor_protocol read_proto;
 	int ret;
 
 	read_opcode = nor->read_opcode;
-	addr_width = nor->addr_width;
+	addr_nbytes = nor->addr_nbytes;
 	read_dummy = nor->read_dummy;
 	read_proto = nor->read_proto;
 	rdesc = nor->dirmap.rdesc;
@@ -54,7 +54,7 @@ int spi_nor_otp_read_secr(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf)
 	ret = spi_nor_read_data(nor, addr, len, buf);
 
 	nor->read_opcode = read_opcode;
-	nor->addr_width = addr_width;
+	nor->addr_nbytes = addr_nbytes;
 	nor->read_dummy = read_dummy;
 	nor->read_proto = read_proto;
 	nor->dirmap.rdesc = rdesc;
@@ -85,11 +85,11 @@ int spi_nor_otp_write_secr(struct spi_nor *nor, loff_t addr, size_t len,
 {
 	enum spi_nor_protocol write_proto;
 	struct spi_mem_dirmap_desc *wdesc;
-	u8 addr_width, program_opcode;
+	u8 addr_nbytes, program_opcode;
 	int ret, written;
 
 	program_opcode = nor->program_opcode;
-	addr_width = nor->addr_width;
+	addr_nbytes = nor->addr_nbytes;
 	write_proto = nor->write_proto;
 	wdesc = nor->dirmap.wdesc;
 
@@ -113,7 +113,7 @@ int spi_nor_otp_write_secr(struct spi_nor *nor, loff_t addr, size_t len,
 
 out:
 	nor->program_opcode = program_opcode;
-	nor->addr_width = addr_width;
+	nor->addr_nbytes = addr_nbytes;
 	nor->write_proto = write_proto;
 	nor->dirmap.wdesc = wdesc;
 
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index a5211543d30d..61ae8c8c5237 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -134,7 +134,7 @@ struct sfdp_4bait {
 
 /**
  * spi_nor_read_raw() - raw read of serial flash memory. read_opcode,
- *			addr_width and read_dummy members of the struct spi_nor
+ *			addr_nbytes and read_dummy members of the struct spi_nor
  *			should be previously
  * set.
  * @nor:	pointer to a 'struct spi_nor'
@@ -178,21 +178,21 @@ static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf)
 static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr,
 			     size_t len, void *buf)
 {
-	u8 addr_width, read_opcode, read_dummy;
+	u8 addr_nbytes, read_opcode, read_dummy;
 	int ret;
 
 	read_opcode = nor->read_opcode;
-	addr_width = nor->addr_width;
+	addr_nbytes = nor->addr_nbytes;
 	read_dummy = nor->read_dummy;
 
 	nor->read_opcode = SPINOR_OP_RDSFDP;
-	nor->addr_width = 3;
+	nor->addr_nbytes = 3;
 	nor->read_dummy = 8;
 
 	ret = spi_nor_read_raw(nor, addr, len, buf);
 
 	nor->read_opcode = read_opcode;
-	nor->addr_width = addr_width;
+	nor->addr_nbytes = addr_nbytes;
 	nor->read_dummy = read_dummy;
 
 	return ret;
@@ -462,11 +462,11 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 	switch (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) {
 	case BFPT_DWORD1_ADDRESS_BYTES_3_ONLY:
 	case BFPT_DWORD1_ADDRESS_BYTES_3_OR_4:
-		nor->addr_width = 3;
+		nor->addr_nbytes = 3;
 		break;
 
 	case BFPT_DWORD1_ADDRESS_BYTES_4_ONLY:
-		nor->addr_width = 4;
+		nor->addr_nbytes = 4;
 		break;
 
 	default:
@@ -637,12 +637,12 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 }
 
 /**
- * spi_nor_smpt_addr_width() - return the address width used in the
+ * spi_nor_smpt_addr_nbytes() - return the number of address bytes used in the
  *			       configuration detection command.
  * @nor:	pointer to a 'struct spi_nor'
  * @settings:	configuration detection command descriptor, dword1
  */
-static u8 spi_nor_smpt_addr_width(const struct spi_nor *nor, const u32 settings)
+static u8 spi_nor_smpt_addr_nbytes(const struct spi_nor *nor, const u32 settings)
 {
 	switch (settings & SMPT_CMD_ADDRESS_LEN_MASK) {
 	case SMPT_CMD_ADDRESS_LEN_0:
@@ -653,7 +653,7 @@ static u8 spi_nor_smpt_addr_width(const struct spi_nor *nor, const u32 settings)
 		return 4;
 	case SMPT_CMD_ADDRESS_LEN_USE_CURRENT:
 	default:
-		return nor->addr_width;
+		return nor->addr_nbytes;
 	}
 }
 
@@ -690,7 +690,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
 	u32 addr;
 	int err;
 	u8 i;
-	u8 addr_width, read_opcode, read_dummy;
+	u8 addr_nbytes, read_opcode, read_dummy;
 	u8 read_data_mask, map_id;
 
 	/* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
@@ -698,7 +698,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
 	if (!buf)
 		return ERR_PTR(-ENOMEM);
 
-	addr_width = nor->addr_width;
+	addr_nbytes = nor->addr_nbytes;
 	read_dummy = nor->read_dummy;
 	read_opcode = nor->read_opcode;
 
@@ -709,7 +709,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
 			break;
 
 		read_data_mask = SMPT_CMD_READ_DATA(smpt[i]);
-		nor->addr_width = spi_nor_smpt_addr_width(nor, smpt[i]);
+		nor->addr_nbytes = spi_nor_smpt_addr_nbytes(nor, smpt[i]);
 		nor->read_dummy = spi_nor_smpt_read_dummy(nor, smpt[i]);
 		nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]);
 		addr = smpt[i + 1];
@@ -756,7 +756,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
 	/* fall through */
 out:
 	kfree(buf);
-	nor->addr_width = addr_width;
+	nor->addr_nbytes = addr_nbytes;
 	nor->read_dummy = read_dummy;
 	nor->read_opcode = read_opcode;
 	return ret;
@@ -1044,7 +1044,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
 	/*
 	 * We need at least one 4-byte op code per read, program and erase
 	 * operation; the .read(), .write() and .erase() hooks share the
-	 * nor->addr_width value.
+	 * nor->addr_nbytes value.
 	 */
 	if (!read_hwcaps || !pp_hwcaps || !erase_mask)
 		goto out;
@@ -1098,7 +1098,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
 	 * Spansion memory. However this quirk is no longer needed with new
 	 * SFDP compliant memories.
 	 */
-	nor->addr_width = 4;
+	nor->addr_nbytes = 4;
 	nor->flags |= SNOR_F_4B_OPCODES | SNOR_F_HAS_4BAIT;
 
 	/* fall through */
diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index 1d2f5db047bd..5723157739fc 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -31,7 +31,7 @@
 		.sector_size = (8 * (_page_size)),			\
 		.n_sectors = (_n_sectors),				\
 		.page_size = (_page_size),				\
-		.addr_width = 3,					\
+		.addr_nbytes = 3,					\
 		.flags = SPI_NOR_NO_FR
 
 /* Xilinx S3AN share MFR with Atmel SPI NOR */
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 1ede4c89805a..42218a1164f6 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -351,7 +351,7 @@ struct spi_nor_flash_parameter;
  * @bouncebuf_size:	size of the bounce buffer
  * @info:		SPI NOR part JEDEC MFR ID and other info
  * @manufacturer:	SPI NOR manufacturer
- * @addr_width:		number of address bytes
+ * @addr_nbytes:	number of address bytes
  * @erase_opcode:	the opcode for erasing a sector
  * @read_opcode:	the read opcode
  * @read_dummy:		the dummy needed by the read operation
@@ -381,7 +381,7 @@ struct spi_nor {
 	size_t			bouncebuf_size;
 	const struct flash_info	*info;
 	const struct spi_nor_manufacturer *manufacturer;
-	u8			addr_width;
+	u8			addr_nbytes;
 	u8			erase_opcode;
 	u8			read_opcode;
 	u8			read_dummy;
-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v16 1/8] mtd: spi-nor: s/addr_width/addr_nbytes

[Pratyush Yadav]

Hi Takahiro,

On 09/06/22 05:57PM, tkuw584924@gmail.com wrote:
> From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>

Didn't Tudor write this patch? Please attribute authorship to him.

> 
> Address width was an unfortunate name, as it means the number of IO lines
> used for the address, whereas in the code it is used as the number of
> address bytes. s/addr_width/addr_nbytes throughout the entire SPI NOR
> framework.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
> Reviewed-by: Michael Walle <michael@walle.cc>
> Acked-by: Pratyush Yadav <p.yadav@ti.com>

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v16 1/8] mtd: spi-nor: s/addr_width/addr_nbytes

[Tudor.Ambarus]

On 6/21/22 08:51, Pratyush Yadav wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Hi Takahiro,
> 
> On 09/06/22 05:57PM, tkuw584924@gmail.com wrote:
>> From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
> 
> Didn't Tudor write this patch? Please attribute authorship to him.
> 

Takahiro, no need to respin. I'll check the series these days.

Cheers,
ta
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v16 1/8] mtd: spi-nor: s/addr_width/addr_nbytes

[Takahiro Kuwano]

On 6/27/2022 9:37 PM, Tudor.Ambarus@microchip.com wrote:
> On 6/21/22 08:51, Pratyush Yadav wrote:
>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>
>> Hi Takahiro,
>>
>> On 09/06/22 05:57PM, tkuw584924@gmail.com wrote:
>>> From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
>>
>> Didn't Tudor write this patch? Please attribute authorship to him.
>>
> 
> Takahiro, no need to respin. I'll check the series these days.
> 
> Cheers,
> ta
Thank you, Tudor.
Any comments to the series?

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v16 2/8] mtd: spi-nor: core: Shrink the storage size of the flash_info's addr_nbytes

[tkuw584924]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

The maximum number of address bytes in SPI NOR is 4. Shrink the storage
size of the flash_info's addr_nbytes.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
---
 drivers/mtd/spi-nor/core.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index cd76296d0060..5eff3f636416 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -488,7 +488,7 @@ struct flash_info {
 	unsigned sector_size;
 	u16 n_sectors;
 	u16 page_size;
-	u16 addr_nbytes;
+	u8 addr_nbytes;
 
 	bool parse_sfdp;
 	u16 flags;
-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v16 3/8] mtd: spi-nor: Do not change nor->addr_nbytes at SFDP parsing time

[tkuw584924]

From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>

At the SFDP parsing time we should not change members of struct spi_nor,
but instead fill members of struct spi_nor_flash_parameters which could
later on be used by callers. The caller will then decide if SFDP params
should be used and more importantly when they should be used. Clean the
code flow and don't initialize nor->addr_nbytes at SFDP parsing time.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Tested-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
---
Changes in v16:
  - Stop restoring nor->addr_nbytes to uninitialized state

 drivers/mtd/spi-nor/core.c | 5 ++---
 drivers/mtd/spi-nor/core.h | 2 ++
 drivers/mtd/spi-nor/issi.c | 2 +-
 drivers/mtd/spi-nor/sfdp.c | 8 ++++----
 4 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 14b6b1f38b69..70a9570fc2d4 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2251,8 +2251,8 @@ static int spi_nor_default_setup(struct spi_nor *nor,
 
 static int spi_nor_set_addr_nbytes(struct spi_nor *nor)
 {
-	if (nor->addr_nbytes) {
-		/* already configured from SFDP */
+	if (nor->params->addr_nbytes) {
+		nor->addr_nbytes = nor->params->addr_nbytes;
 	} else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR) {
 		/*
 		 * In 8D-8D-8D mode, one byte takes half a cycle to transfer. So
@@ -2497,7 +2497,6 @@ static void spi_nor_sfdp_init_params_deprecated(struct spi_nor *nor)
 
 	if (spi_nor_parse_sfdp(nor)) {
 		memcpy(nor->params, &sfdp_params, sizeof(*nor->params));
-		nor->addr_nbytes = 0;
 		nor->flags &= ~SNOR_F_4B_OPCODES;
 	}
 }
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 5eff3f636416..972e54ecfda9 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -340,6 +340,7 @@ struct spi_nor_otp {
  * @writesize		Minimal writable flash unit size. Defaults to 1. Set to
  *			ECC unit size for ECC-ed flashes.
  * @page_size:		the page size of the SPI NOR flash memory.
+ * @addr_nbytes:	number of address bytes to send.
  * @rdsr_dummy:		dummy cycles needed for Read Status Register command
  *			in octal DTR mode.
  * @rdsr_addr_nbytes:	dummy address bytes needed for Read Status Register
@@ -372,6 +373,7 @@ struct spi_nor_flash_parameter {
 	u64				size;
 	u32				writesize;
 	u32				page_size;
+	u8				addr_nbytes;
 	u8				rdsr_dummy;
 	u8				rdsr_addr_nbytes;
 
diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index 23e331cc42a9..4d44f2510889 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -20,7 +20,7 @@ is25lp256_post_bfpt_fixups(struct spi_nor *nor,
 	 */
 	if ((bfpt->dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) ==
 		BFPT_DWORD1_ADDRESS_BYTES_3_ONLY)
-		nor->addr_nbytes = 4;
+		nor->params->addr_nbytes = 4;
 
 	return 0;
 }
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index 61ae8c8c5237..3a48173a2d78 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -462,11 +462,11 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 	switch (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) {
 	case BFPT_DWORD1_ADDRESS_BYTES_3_ONLY:
 	case BFPT_DWORD1_ADDRESS_BYTES_3_OR_4:
-		nor->addr_nbytes = 3;
+		params->addr_nbytes = 3;
 		break;
 
 	case BFPT_DWORD1_ADDRESS_BYTES_4_ONLY:
-		nor->addr_nbytes = 4;
+		params->addr_nbytes = 4;
 		break;
 
 	default:
@@ -653,7 +653,7 @@ static u8 spi_nor_smpt_addr_nbytes(const struct spi_nor *nor, const u32 settings
 		return 4;
 	case SMPT_CMD_ADDRESS_LEN_USE_CURRENT:
 	default:
-		return nor->addr_nbytes;
+		return nor->params->addr_nbytes;
 	}
 }
 
@@ -1098,7 +1098,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
 	 * Spansion memory. However this quirk is no longer needed with new
 	 * SFDP compliant memories.
 	 */
-	nor->addr_nbytes = 4;
+	params->addr_nbytes = 4;
 	nor->flags |= SNOR_F_4B_OPCODES | SNOR_F_HAS_4BAIT;
 
 	/* fall through */
-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v16 4/8] mtd: spi-nor: core: Return error code from set_4byte_addr_mode()

[tkuw584924]

From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>

The prams->set_4byte_addr_mode returns error code but is not handled
in spi_nor_init().

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
---
 drivers/mtd/spi-nor/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 70a9570fc2d4..3aa159d29159 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2729,7 +2729,7 @@ static int spi_nor_init(struct spi_nor *nor)
 		 */
 		WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET,
 			  "enabling reset hack; may not recover from unexpected reboots\n");
-		nor->params->set_4byte_addr_mode(nor, true);
+		return nor->params->set_4byte_addr_mode(nor, true);
 	}
 
 	return 0;
-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v16 5/8] mtd: spi-nor: core: Couple the number of address

[tkuw584924]

From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>

Some of Infineon chips support volatile version of configuration registers
and it is recommended to update volatile registers in the field application
due to a risk of the non-volatile registers corruption by power interrupt.
Such a volatile configuration register is used to enable the Quad mode.
The register write sequence requires the number of bytes of address in
order to be programmed. As it was before, the nor->addr_nbytes was set to 4
before calling the volatile Quad enable method. This was incorrect because
the Write Any Register command does not have a 4B opcode equivalent and the
address mode was still at default (3-byte mode) and not changed to 4 by
entering in the 4 Byte Address Mode, so the operation failed.

Move the setting of the number of bytes of address after the Quad Enable
method to allow reads or writes to registers that require the number of
address bytes to work with the default address mode. The number of address
bytes and the address mode are tightly coupled, this is a natural change.

Other (standard) Quad Enable methods are not affected, as they don't
require the number of address bytes, so no functionality changes expected.

Reported-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Tested-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
---
Changes in v16:
  - Return error code from set_4byte_addr_mode()

 drivers/mtd/spi-nor/core.c | 134 +++++++++++++++++++------------------
 1 file changed, 70 insertions(+), 64 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 3aa159d29159..883df4c47e4e 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2249,49 +2249,6 @@ static int spi_nor_default_setup(struct spi_nor *nor,
 	return 0;
 }
 
-static int spi_nor_set_addr_nbytes(struct spi_nor *nor)
-{
-	if (nor->params->addr_nbytes) {
-		nor->addr_nbytes = nor->params->addr_nbytes;
-	} else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR) {
-		/*
-		 * In 8D-8D-8D mode, one byte takes half a cycle to transfer. So
-		 * in this protocol an odd address width cannot be used because
-		 * then the address phase would only span a cycle and a half.
-		 * Half a cycle would be left over. We would then have to start
-		 * the dummy phase in the middle of a cycle and so too the data
-		 * phase, and we will end the transaction with half a cycle left
-		 * over.
-		 *
-		 * Force all 8D-8D-8D flashes to use an address width of 4 to
-		 * avoid this situation.
-		 */
-		nor->addr_nbytes = 4;
-	} else if (nor->info->addr_nbytes) {
-		nor->addr_nbytes = nor->info->addr_nbytes;
-	} else {
-		nor->addr_nbytes = 3;
-	}
-
-	if (nor->addr_nbytes == 3 && nor->params->size > 0x1000000) {
-		/* enable 4-byte addressing if the device exceeds 16MiB */
-		nor->addr_nbytes = 4;
-	}
-
-	if (nor->addr_nbytes > SPI_NOR_MAX_ADDR_NBYTES) {
-		dev_dbg(nor->dev, "address width is too large: %u\n",
-			nor->addr_nbytes);
-		return -EINVAL;
-	}
-
-	/* Set 4byte opcodes when possible. */
-	if (nor->addr_nbytes == 4 && nor->flags & SNOR_F_4B_OPCODES &&
-	    !(nor->flags & SNOR_F_HAS_4BAIT))
-		spi_nor_set_4byte_opcodes(nor);
-
-	return 0;
-}
-
 static int spi_nor_setup(struct spi_nor *nor,
 			 const struct spi_nor_hwcaps *hwcaps)
 {
@@ -2301,10 +2258,7 @@ static int spi_nor_setup(struct spi_nor *nor,
 		ret = nor->params->setup(nor, hwcaps);
 	else
 		ret = spi_nor_default_setup(nor, hwcaps);
-	if (ret)
-		return ret;
-
-	return spi_nor_set_addr_nbytes(nor);
+	return ret;
 }
 
 /**
@@ -2686,6 +2640,74 @@ static int spi_nor_quad_enable(struct spi_nor *nor)
 	return nor->params->quad_enable(nor);
 }
 
+static int spi_nor_set_addr_nbytes(struct spi_nor *nor)
+{
+	if (nor->params->addr_nbytes) {
+		nor->addr_nbytes = nor->params->addr_nbytes;
+	} else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR) {
+		/*
+		 * In 8D-8D-8D mode, one byte takes half a cycle to transfer. So
+		 * in this protocol an odd address width cannot be used because
+		 * then the address phase would only span a cycle and a half.
+		 * Half a cycle would be left over. We would then have to start
+		 * the dummy phase in the middle of a cycle and so too the data
+		 * phase, and we will end the transaction with half a cycle left
+		 * over.
+		 *
+		 * Force all 8D-8D-8D flashes to use an address width of 4 to
+		 * avoid this situation.
+		 */
+		nor->addr_nbytes = 4;
+	} else if (nor->info->addr_nbytes) {
+		nor->addr_nbytes = nor->info->addr_nbytes;
+	} else {
+		nor->addr_nbytes = 3;
+	}
+
+	if (nor->addr_nbytes == 3 && nor->params->size > 0x1000000) {
+		/* enable 4-byte addressing if the device exceeds 16MiB */
+		nor->addr_nbytes = 4;
+	}
+
+	if (nor->addr_nbytes > SPI_NOR_MAX_ADDR_NBYTES) {
+		dev_dbg(nor->dev, "address width is too large: %u\n",
+			nor->addr_nbytes);
+		return -EINVAL;
+	}
+
+	/* Set 4byte opcodes when possible. */
+	if (nor->addr_nbytes == 4 && nor->flags & SNOR_F_4B_OPCODES &&
+	    !(nor->flags & SNOR_F_HAS_4BAIT))
+		spi_nor_set_4byte_opcodes(nor);
+
+	return 0;
+}
+
+static int spi_nor_set_addr_mode(struct spi_nor *nor)
+{
+	int ret;
+
+	ret = spi_nor_set_addr_nbytes(nor);
+	if (ret)
+		return ret;
+
+	if (nor->addr_nbytes == 4 && nor->read_proto != SNOR_PROTO_8_8_8_DTR &&
+	    !(nor->flags & SNOR_F_4B_OPCODES)) {
+		/*
+		 * If the RESET# pin isn't hooked up properly, or the system
+		 * otherwise doesn't perform a reset command in the boot
+		 * sequence, it's impossible to 100% protect against unexpected
+		 * reboots (e.g., crashes). Warn the user (or hopefully, system
+		 * designer) that this is bad.
+		 */
+		WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET,
+			  "enabling reset hack; may not recover from unexpected reboots\n");
+		return nor->params->set_4byte_addr_mode(nor, true);
+	}
+
+	return 0;
+}
+
 static int spi_nor_init(struct spi_nor *nor)
 {
 	int err;
@@ -2717,22 +2739,7 @@ static int spi_nor_init(struct spi_nor *nor)
 	     nor->flags & SNOR_F_SWP_IS_VOLATILE))
 		spi_nor_try_unlock_all(nor);
 
-	if (nor->addr_nbytes == 4 &&
-	    nor->read_proto != SNOR_PROTO_8_8_8_DTR &&
-	    !(nor->flags & SNOR_F_4B_OPCODES)) {
-		/*
-		 * If the RESET# pin isn't hooked up properly, or the system
-		 * otherwise doesn't perform a reset command in the boot
-		 * sequence, it's impossible to 100% protect against unexpected
-		 * reboots (e.g., crashes). Warn the user (or hopefully, system
-		 * designer) that this is bad.
-		 */
-		WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET,
-			  "enabling reset hack; may not recover from unexpected reboots\n");
-		return nor->params->set_4byte_addr_mode(nor, true);
-	}
-
-	return 0;
+	return spi_nor_set_addr_mode(nor);
 }
 
 /**
@@ -2988,7 +2995,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	 * - select op codes for (Fast) Read, Page Program and Sector Erase.
 	 * - set the number of dummy cycles (mode cycles + wait states).
 	 * - set the SPI protocols for register and memory accesses.
-	 * - set the address width.
 	 */
 	ret = spi_nor_setup(nor, hwcaps);
 	if (ret)
-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v16 6/8] mtd: spi-nor: Do not change nor->params->addr_nbytes at 4BAIT parsing time

[tkuw584924]

From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>

At the 4BAIT parsing time, we need to keep nor->params->addr_nbytes value
as it may be used as current address mode in SMPT parse and device specific
hooks.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
Changes in v16:
  - Update commit message and description

 drivers/mtd/spi-nor/core.c | 2 ++
 drivers/mtd/spi-nor/sfdp.c | 1 -
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 883df4c47e4e..c6c7d1fd19bc 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2643,6 +2643,8 @@ static int spi_nor_quad_enable(struct spi_nor *nor)
 static int spi_nor_set_addr_nbytes(struct spi_nor *nor)
 {
 	if (nor->params->addr_nbytes) {
+		if (nor->flags & SNOR_F_HAS_4BAIT)
+			nor->params->addr_nbytes = 4;
 		nor->addr_nbytes = nor->params->addr_nbytes;
 	} else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR) {
 		/*
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index 3a48173a2d78..f72947a97981 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -1098,7 +1098,6 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
 	 * Spansion memory. However this quirk is no longer needed with new
 	 * SFDP compliant memories.
 	 */
-	params->addr_nbytes = 4;
 	nor->flags |= SNOR_F_4B_OPCODES | SNOR_F_HAS_4BAIT;
 
 	/* fall through */
-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v16 7/8] mtd: spi-nor: spansion: Add local function to discover page size

[tkuw584924]

From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>

The page size check in s28hs512t fixup can be used for s25hs/hl-t as well.
Move that to a newly created local function. Please note that the hardcoded
value 3 for the number of address bytes was replaced by
nor->params->addr_nbytes.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/mtd/spi-nor/spansion.c | 54 ++++++++++++++++++++--------------
 1 file changed, 32 insertions(+), 22 deletions(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 43cd6cd92537..e130f5398763 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -113,6 +113,37 @@ static int cypress_nor_octal_dtr_dis(struct spi_nor *nor)
 	return 0;
 }
 
+/**
+ * cypress_nor_set_page_size() - Set page size which corresponds to the flash
+ *                               configuration.
+ * @nor:	pointer to a 'struct spi_nor'
+ *
+ * The BFPT table advertises a 512B or 256B page size depending on part but the
+ * page size is actually configurable (with the default being 256B). Read from
+ * CFR3V[4] and set the correct size.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int cypress_nor_set_page_size(struct spi_nor *nor)
+{
+	struct spi_mem_op op =
+		CYPRESS_NOR_RD_ANY_REG_OP(nor->params->addr_nbytes,
+					  SPINOR_REG_CYPRESS_CFR3V,
+					  nor->bouncebuf);
+	int ret;
+
+	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR3V_PGSZ)
+		nor->params->page_size = 512;
+	else
+		nor->params->page_size = 256;
+
+	return 0;
+}
+
 /**
  * cypress_nor_octal_dtr_enable() - Enable octal DTR on Cypress flashes.
  * @nor:		pointer to a 'struct spi_nor'
@@ -167,28 +198,7 @@ static int s28hs512t_post_bfpt_fixup(struct spi_nor *nor,
 				     const struct sfdp_parameter_header *bfpt_header,
 				     const struct sfdp_bfpt *bfpt)
 {
-	/*
-	 * The BFPT table advertises a 512B page size but the page size is
-	 * actually configurable (with the default being 256B). Read from
-	 * CFR3V[4] and set the correct size.
-	 */
-	struct spi_mem_op op =
-		CYPRESS_NOR_RD_ANY_REG_OP(3, SPINOR_REG_CYPRESS_CFR3V,
-					  nor->bouncebuf);
-	int ret;
-
-	spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
-
-	ret = spi_mem_exec_op(nor->spimem, &op);
-	if (ret)
-		return ret;
-
-	if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR3V_PGSZ)
-		nor->params->page_size = 512;
-	else
-		nor->params->page_size = 256;
-
-	return 0;
+	return cypress_nor_set_page_size(nor);
 }
 
 static const struct spi_nor_fixups s28hs512t_fixups = {
-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v16 8/8] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups

[tkuw584924]

From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>

The S25HL-T/S25HS-T family is the Infineon SEMPER Flash with Quad SPI.

These Infineon chips support volatile version of configuration registers
and it is recommended to update volatile registers in the field application
due to a risk of the non-volatile registers corruption by power interrupt.
Add support for volatile QE bit.

For the single-die package parts (512Mb and 1Gb), only bottom 4KB and
uniform sector sizes are supported. This is due to missing or incorrect
entries in SMPT. Fixup for other sector sizes configurations will be
followed up as needed.

Tested on Xilinx Zynq-7000 FPGA board.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/mtd/spi-nor/spansion.c | 129 +++++++++++++++++++++++++++++++++
 1 file changed, 129 insertions(+)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index e130f5398763..71c2fb1dc101 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -14,6 +14,8 @@
 #define SPINOR_OP_CLSR		0x30	/* Clear status register 1 */
 #define SPINOR_OP_RD_ANY_REG			0x65	/* Read any register */
 #define SPINOR_OP_WR_ANY_REG			0x71	/* Write any register */
+#define SPINOR_REG_CYPRESS_CFR1V		0x00800002
+#define SPINOR_REG_CYPRESS_CFR1V_QUAD_EN	BIT(1)	/* Quad Enable */
 #define SPINOR_REG_CYPRESS_CFR2V		0x00800003
 #define SPINOR_REG_CYPRESS_CFR2V_MEMLAT_11_24	0xb
 #define SPINOR_REG_CYPRESS_CFR3V		0x00800004
@@ -113,6 +115,67 @@ static int cypress_nor_octal_dtr_dis(struct spi_nor *nor)
 	return 0;
 }
 
+/**
+ * cypress_nor_quad_enable_volatile() - enable Quad I/O mode in volatile
+ *                                      register.
+ * @nor:	pointer to a 'struct spi_nor'
+ *
+ * It is recommended to update volatile registers in the field application due
+ * to a risk of the non-volatile registers corruption by power interrupt. This
+ * function sets Quad Enable bit in CFR1 volatile. If users set the Quad Enable
+ * bit in the CFR1 non-volatile in advance (typically by a Flash programmer
+ * before mounting Flash on PCB), the Quad Enable bit in the CFR1 volatile is
+ * also set during Flash power-up.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int cypress_nor_quad_enable_volatile(struct spi_nor *nor)
+{
+	struct spi_mem_op op;
+	u8 cfr1v_written;
+	int ret;
+
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_RD_ANY_REG_OP(nor->params->addr_nbytes,
+					  SPINOR_REG_CYPRESS_CFR1V,
+					  nor->bouncebuf);
+
+	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR1V_QUAD_EN)
+		return 0;
+
+	/* Update the Quad Enable bit. */
+	nor->bouncebuf[0] |= SPINOR_REG_CYPRESS_CFR1V_QUAD_EN;
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_WR_ANY_REG_OP(nor->params->addr_nbytes,
+					  SPINOR_REG_CYPRESS_CFR1V, 1,
+					  nor->bouncebuf);
+	ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	cfr1v_written = nor->bouncebuf[0];
+
+	/* Read back and check it. */
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_RD_ANY_REG_OP(nor->params->addr_nbytes,
+					  SPINOR_REG_CYPRESS_CFR1V,
+					  nor->bouncebuf);
+	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] != cfr1v_written) {
+		dev_err(nor->dev, "CFR1: Read back test failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
 /**
  * cypress_nor_set_page_size() - Set page size which corresponds to the flash
  *                               configuration.
@@ -144,6 +207,56 @@ static int cypress_nor_set_page_size(struct spi_nor *nor)
 	return 0;
 }
 
+static int
+s25hx_t_post_bfpt_fixup(struct spi_nor *nor,
+			const struct sfdp_parameter_header *bfpt_header,
+			const struct sfdp_bfpt *bfpt)
+{
+	/* Replace Quad Enable with volatile version */
+	nor->params->quad_enable = cypress_nor_quad_enable_volatile;
+
+	return cypress_nor_set_page_size(nor);
+}
+
+static void s25hx_t_post_sfdp_fixup(struct spi_nor *nor)
+{
+	struct spi_nor_erase_type *erase_type =
+					nor->params->erase_map.erase_type;
+	int i;
+
+	/*
+	 * In some parts, 3byte erase opcodes are advertised by 4BAIT.
+	 * Convert them to 4byte erase opcodes.
+	 */
+	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+		switch (erase_type[i].opcode) {
+		case SPINOR_OP_SE:
+			erase_type[i].opcode = SPINOR_OP_SE_4B;
+			break;
+		case SPINOR_OP_BE_4K:
+			erase_type[i].opcode = SPINOR_OP_BE_4K_4B;
+			break;
+		default:
+			break;
+		}
+	}
+}
+
+static void s25hx_t_late_init(struct spi_nor *nor)
+{
+	/* Fast Read 4B requires mode cycles */
+	nor->params->reads[SNOR_CMD_READ_FAST].num_mode_clocks = 8;
+
+	/* The writesize should be ECC data unit size */
+	nor->params->writesize = 16;
+}
+
+static struct spi_nor_fixups s25hx_t_fixups = {
+	.post_bfpt = s25hx_t_post_bfpt_fixup,
+	.post_sfdp = s25hx_t_post_sfdp_fixup,
+	.late_init = s25hx_t_late_init,
+};
+
 /**
  * cypress_nor_octal_dtr_enable() - Enable octal DTR on Cypress flashes.
  * @nor:		pointer to a 'struct spi_nor'
@@ -320,6 +433,22 @@ static const struct flash_info spansion_nor_parts[] = {
 	{ "s25fl256l",  INFO(0x016019,      0,  64 * 1024, 512)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
 		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "s25hl512t",  INFO6(0x342a1a, 0x0f0390, 256 * 1024, 256)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLSR)
+		.fixups = &s25hx_t_fixups },
+	{ "s25hl01gt",  INFO6(0x342a1b, 0x0f0390, 256 * 1024, 512)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLSR)
+		.fixups = &s25hx_t_fixups },
+	{ "s25hs512t",  INFO6(0x342b1a, 0x0f0390, 256 * 1024, 256)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLSR)
+		.fixups = &s25hx_t_fixups },
+	{ "s25hs01gt",  INFO6(0x342b1b, 0x0f0390, 256 * 1024, 512)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLSR)
+		.fixups = &s25hx_t_fixups },
 	{ "cy15x104q",  INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1)
 		FLAGS(SPI_NOR_NO_ERASE) },
 	{ "s28hs512t",   INFO(0x345b1a,      0, 256 * 1024, 256)
-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/