Linux-mtd Archive on lore.kernel.org
 help / color / Atom feed
From: Vignesh Raghavendra <vigneshr@ti.com>
To: <Tudor.Ambarus@microchip.com>, <boris.brezillon@collabora.com>,
	<marek.vasut@gmail.com>, <miquel.raynal@bootlin.com>,
	<richard@nod.at>, <linux-mtd@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [RESEND PATCH v3 02/20] mtd: spi-nor: Use nor->params
Date: Tue, 27 Aug 2019 10:01:31 +0530
Message-ID: <7430df6b-e31d-b77a-fe84-735fe1a3df18@ti.com> (raw)
In-Reply-To: <20190826120821.16351-3-tudor.ambarus@microchip.com>



On 26/08/19 5:38 PM, Tudor.Ambarus@microchip.com wrote:
> From: Tudor Ambarus <tudor.ambarus@microchip.com>
> 
> The Flash parameters and settings are now stored in 'struct spi_nor'.
> Use this instead of the stack allocated params.
> 
> Few functions stop passing pointer to params, as they can get it from
> 'struct spi_nor'. spi_nor_parse_sfdp() and children will keep passing
> pointer to params because of the roll-back mechanism: in case the
> parsing of SFDP fails, the legacy flash parameter and settings will be
> restored.
> 
> Zeroing params is no longer needed because all SPI NOR users kzalloc
> 'struct spi_nor'.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
> ---

Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>

Regards
Vignesh

> v3: collect R-b
> 
>  drivers/mtd/spi-nor/spi-nor.c | 46 ++++++++++++++++++-------------------------
>  1 file changed, 19 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index d35dc6a97521..e9b9cd70a999 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -2974,16 +2974,13 @@ static int spi_nor_spimem_check_pp(struct spi_nor *nor,
>   * spi_nor_spimem_adjust_hwcaps - Find optimal Read/Write protocol
>   *                                based on SPI controller capabilities
>   * @nor:        pointer to a 'struct spi_nor'
> - * @params:     pointer to the 'struct spi_nor_flash_parameter'
> - *              representing SPI NOR flash capabilities
>   * @hwcaps:     pointer to resulting capabilities after adjusting
>   *              according to controller and flash's capability
>   */
>  static void
> -spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor,
> -			     const struct spi_nor_flash_parameter *params,
> -			     u32 *hwcaps)
> +spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor, u32 *hwcaps)
>  {
> +	struct spi_nor_flash_parameter *params =  &nor->params;
>  	unsigned int cap;
>  
>  	/* DTR modes are not supported yet, mask them all. */
> @@ -4129,16 +4126,13 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor,
>  	return err;
>  }
>  
> -static int spi_nor_init_params(struct spi_nor *nor,
> -			       struct spi_nor_flash_parameter *params)
> +static int spi_nor_init_params(struct spi_nor *nor)
>  {
> +	struct spi_nor_flash_parameter *params = &nor->params;
>  	struct spi_nor_erase_map *map = &nor->erase_map;
>  	const struct flash_info *info = nor->info;
>  	u8 i, erase_mask;
>  
> -	/* Set legacy flash parameters as default. */
> -	memset(params, 0, sizeof(*params));
> -
>  	/* Set SPI NOR sizes. */
>  	params->size = (u64)info->sector_size * info->n_sectors;
>  	params->page_size = info->page_size;
> @@ -4255,7 +4249,6 @@ static int spi_nor_init_params(struct spi_nor *nor,
>  }
>  
>  static int spi_nor_select_read(struct spi_nor *nor,
> -			       const struct spi_nor_flash_parameter *params,
>  			       u32 shared_hwcaps)
>  {
>  	int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_READ_MASK) - 1;
> @@ -4268,7 +4261,7 @@ static int spi_nor_select_read(struct spi_nor *nor,
>  	if (cmd < 0)
>  		return -EINVAL;
>  
> -	read = &params->reads[cmd];
> +	read = &nor->params.reads[cmd];
>  	nor->read_opcode = read->opcode;
>  	nor->read_proto = read->proto;
>  
> @@ -4287,7 +4280,6 @@ static int spi_nor_select_read(struct spi_nor *nor,
>  }
>  
>  static int spi_nor_select_pp(struct spi_nor *nor,
> -			     const struct spi_nor_flash_parameter *params,
>  			     u32 shared_hwcaps)
>  {
>  	int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_PP_MASK) - 1;
> @@ -4300,7 +4292,7 @@ static int spi_nor_select_pp(struct spi_nor *nor,
>  	if (cmd < 0)
>  		return -EINVAL;
>  
> -	pp = &params->page_programs[cmd];
> +	pp = &nor->params.page_programs[cmd];
>  	nor->program_opcode = pp->opcode;
>  	nor->write_proto = pp->proto;
>  	return 0;
> @@ -4407,9 +4399,9 @@ static int spi_nor_select_erase(struct spi_nor *nor, u32 wanted_size)
>  }
>  
>  static int spi_nor_setup(struct spi_nor *nor,
> -			 const struct spi_nor_flash_parameter *params,
>  			 const struct spi_nor_hwcaps *hwcaps)
>  {
> +	struct spi_nor_flash_parameter *params = &nor->params;
>  	u32 ignored_mask, shared_mask;
>  	bool enable_quad_io;
>  	int err;
> @@ -4426,7 +4418,7 @@ static int spi_nor_setup(struct spi_nor *nor,
>  		 * need to discard some of them based on what the SPI
>  		 * controller actually supports (using spi_mem_supports_op()).
>  		 */
> -		spi_nor_spimem_adjust_hwcaps(nor, params, &shared_mask);
> +		spi_nor_spimem_adjust_hwcaps(nor, &shared_mask);
>  	} else {
>  		/*
>  		 * SPI n-n-n protocols are not supported when the SPI
> @@ -4442,7 +4434,7 @@ static int spi_nor_setup(struct spi_nor *nor,
>  	}
>  
>  	/* Select the (Fast) Read command. */
> -	err = spi_nor_select_read(nor, params, shared_mask);
> +	err = spi_nor_select_read(nor, shared_mask);
>  	if (err) {
>  		dev_err(nor->dev,
>  			"can't select read settings supported by both the SPI controller and memory.\n");
> @@ -4450,7 +4442,7 @@ static int spi_nor_setup(struct spi_nor *nor,
>  	}
>  
>  	/* Select the Page Program command. */
> -	err = spi_nor_select_pp(nor, params, shared_mask);
> +	err = spi_nor_select_pp(nor, shared_mask);
>  	if (err) {
>  		dev_err(nor->dev,
>  			"can't select write settings supported by both the SPI controller and memory.\n");
> @@ -4553,11 +4545,11 @@ static const struct flash_info *spi_nor_match_id(const char *name)
>  int spi_nor_scan(struct spi_nor *nor, const char *name,
>  		 const struct spi_nor_hwcaps *hwcaps)
>  {
> -	struct spi_nor_flash_parameter params;
>  	const struct flash_info *info = NULL;
>  	struct device *dev = nor->dev;
>  	struct mtd_info *mtd = &nor->mtd;
>  	struct device_node *np = spi_nor_get_flash_node(nor);
> +	struct spi_nor_flash_parameter *params = &nor->params;
>  	int ret;
>  	int i;
>  
> @@ -4639,7 +4631,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
>  		nor->clear_sr_bp = spi_nor_clear_sr_bp;
>  
>  	/* Parse the Serial Flash Discoverable Parameters table. */
> -	ret = spi_nor_init_params(nor, &params);
> +	ret = spi_nor_init_params(nor);
>  	if (ret)
>  		return ret;
>  
> @@ -4649,7 +4641,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
>  	mtd->type = MTD_NORFLASH;
>  	mtd->writesize = 1;
>  	mtd->flags = MTD_CAP_NORFLASH;
> -	mtd->size = params.size;
> +	mtd->size = params->size;
>  	mtd->_erase = spi_nor_erase;
>  	mtd->_read = spi_nor_read;
>  	mtd->_resume = spi_nor_resume;
> @@ -4688,18 +4680,18 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
>  		mtd->flags |= MTD_NO_ERASE;
>  
>  	mtd->dev.parent = dev;
> -	nor->page_size = params.page_size;
> +	nor->page_size = params->page_size;
>  	mtd->writebufsize = nor->page_size;
>  
>  	if (np) {
>  		/* If we were instantiated by DT, use it */
>  		if (of_property_read_bool(np, "m25p,fast-read"))
> -			params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
> +			params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
>  		else
> -			params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
> +			params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
>  	} else {
>  		/* If we weren't instantiated by DT, default to fast-read */
> -		params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
> +		params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
>  	}
>  
>  	if (of_property_read_bool(np, "broken-flash-reset"))
> @@ -4707,7 +4699,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
>  
>  	/* Some devices cannot do fast-read, no matter what DT tells us */
>  	if (info->flags & SPI_NOR_NO_FR)
> -		params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
> +		params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
>  
>  	/*
>  	 * Configure the SPI memory:
> @@ -4716,7 +4708,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
>  	 * - set the SPI protocols for register and memory accesses.
>  	 * - set the Quad Enable bit if needed (required by SPI x-y-4 protos).
>  	 */
> -	ret = spi_nor_setup(nor, &params, hwcaps);
> +	ret = spi_nor_setup(nor, hwcaps);
>  	if (ret)
>  		return ret;
>  
> 

-- 
Regards
Vignesh

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply index

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-26 12:08 [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 01/20] mtd: spi-nor: Regroup flash parameter and settings Tudor.Ambarus
2019-08-27  4:21   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 02/20] mtd: spi-nor: Use nor->params Tudor.Ambarus
2019-08-27  4:31   ` Vignesh Raghavendra [this message]
2019-08-26 12:08 ` [RESEND PATCH v3 03/20] mtd: spi-nor: Drop quad_enable() from 'struct spi-nor' Tudor.Ambarus
2019-08-27  4:47   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 04/20] mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter' Tudor.Ambarus
2019-08-26 12:38   ` Boris Brezillon
2019-08-27  5:39   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 05/20] mtd: spi-nor: Add default_init() hook to tweak flash parameters Tudor.Ambarus
2019-08-27  5:48   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 06/20] mtd: spi-nor: Add a default_init() fixup hook for gd25q256 Tudor.Ambarus
2019-08-27  5:48   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 07/20] mtd: spi_nor: Move manufacturer quad_enable() in ->default_init() Tudor.Ambarus
2019-08-27  5:54   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 08/20] mtd: spi-nor: Split spi_nor_init_params() Tudor.Ambarus
2019-08-27  6:00   ` Vignesh Raghavendra
2019-08-27  7:01     ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 09/20] mtd: spi-nor: Create a ->set_4byte() method Tudor.Ambarus
2019-08-27  6:07   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 10/20] mtd: spi-nor: Rework the SPI NOR lock/unlock logic Tudor.Ambarus
2019-08-27  6:36   ` Vignesh Raghavendra
2019-08-27  6:58     ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 11/20] mtd: spi-nor: Add post_sfdp() hook to tweak flash config Tudor.Ambarus
2019-08-27  7:08   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 12/20] mtd: spi-nor: Add spansion_post_sfdp_fixups() Tudor.Ambarus
2019-08-27  7:10   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 13/20] mtd: spi-nor: Add a ->convert_addr() method Tudor.Ambarus
2019-08-27  7:13   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 14/20] mtd: spi_nor: Add a ->setup() method Tudor.Ambarus
2019-08-26 12:40   ` Boris Brezillon
2019-08-26 13:38     ` Schrempf Frieder
2019-08-26 14:02       ` Boris Brezillon
2019-08-26 14:37         ` Schrempf Frieder
2019-08-27  7:16   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 15/20] mtd: spi-nor: Add s3an_post_sfdp_fixups() Tudor.Ambarus
2019-08-27  7:18   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 16/20] mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag Tudor.Ambarus
2019-08-27  7:48   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 17/20] mtd: spi-nor: Bring flash params init together Tudor.Ambarus
2019-08-27  7:35   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 18/20] mtd: spi_nor: Introduce spi_nor_set_addr_width() Tudor.Ambarus
2019-08-27  7:37   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 19/20] mtd: spi-nor: Introduce spi_nor_get_flash_info() Tudor.Ambarus
2019-08-27  7:37   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND RFC PATCH v3 20/20] mtd: spi-nor: Rework the disabling of block write protection Tudor.Ambarus
2019-08-26 12:49   ` Boris Brezillon
2019-08-27  5:33 ` [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core Vignesh Raghavendra
2019-08-28 10:18 ` Tudor.Ambarus

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7430df6b-e31d-b77a-fe84-735fe1a3df18@ti.com \
    --to=vigneshr@ti.com \
    --cc=Tudor.Ambarus@microchip.com \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mtd Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mtd/0 linux-mtd/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mtd linux-mtd/ https://lore.kernel.org/linux-mtd \
		linux-mtd@lists.infradead.org
	public-inbox-index linux-mtd

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-mtd


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git