From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.8 required=3.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id C0D4EC2BA83 for ; Thu, 13 Feb 2020 10:37:15 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 919B4217F4 for ; Thu, 13 Feb 2020 10:37:15 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="oOQZFrrv"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=nxp.com header.i=@nxp.com header.b="chHajl01" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 919B4217F4 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=nxp.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-mtd-bounces+linux-mtd=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:In-Reply-To:References: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=GdJ+GyKMjzbSXexZ9pGLz+fzkxKjG5t3PrNembIMZd4=; b=oOQZFrrvR8riQa LmhZP38yhGERPsshG5CgawN+ThUreMLcOvXil342Q54lTX8JetVI8M4cKNtJK0Ac/E58kIp/JRgll RWg8ei7TKnyR7UmF77uKnSEJI5R8OMFoFETeSuDFVM+n3jp5vEwNnX/aR6rFu9pob3OQj+DScRUkg FrbrVl5xbtsplDeIvETGPxxA/fplgDBFDlq+/Y06m0q9P4CinVA6uWcpRTtqGQq1pYkD8Te12nfyB fmgZzCIWRsHQv2OcSW+1EviT6rLl5SKV/Tx5Udiw5mazSLdOKZTlZxJS6sK3g+dydT+ZJI3lbdbb6 irgi+mDSaEz07UE0uitw==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1j2Brf-0005HY-Bp; Thu, 13 Feb 2020 10:36:59 +0000 Received: from mail-am6eur05on2045.outbound.protection.outlook.com ([40.107.22.45] helo=EUR05-AM6-obe.outbound.protection.outlook.com) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1j2BrZ-0005HD-AS for linux-mtd@lists.infradead.org; Thu, 13 Feb 2020 10:36:55 +0000 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=MX8St9iqhdjBja2JA37fCzf3uSO17YRVRO+uZz9diesGJA8NQldJsleRwUR873yyTjYPwJjFvoKXWHlUjSRF6UFKmTnmjknTzLqpRuprqx2VfBJViZI3JG9snpndCHpHQJhA2CD3Fr5Jvw8/ph40JcjDw8JnRlWzgTD6lCf/4CqiYCyVeLIJR8Hp6Ly2XLYmu1f45zxdu7D9OMJyN84B3uLvCv2Y3x46ufhKY+ctgykic2rEHaUYSIXvvUdl41K38huYjxwoAfs1hlQ4MAebU1Mms5wWrSnkGaClxapV81ARSOjgcZjk32u5HFkcbZgwmaexWF0kV0N2X50MO5+TgA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=3TnEZzWey7sU73RtYvDyCdH1M3xKwHMzOaUS3FB5/ik=; b=l2s9mBdIWfkspKaG7gdrhEifQPOvSHUYLkmKcDVTQvWRW3SffyC9l8M47e3PH4PKLRs+RqCjKGijWTCdTW25DpylzJ+i2HPUsyqqRA0tncJDyuy9OlMOrqBx5zagmldCtNMZrS0bbTxO9MYhQMN+f31BUK/LD8o77+bso9WV7qYyE4ibH0w9b3vRDwbO5OAHBkW3QAYVPQxKtJgVVsjAW4t+SV+MoqVOEpTKz4OHu5TE6rd2kn4HYuukHnuO9kKeAEjLAozetWq5ZfKmhLkXzAPtE70qCalb225FHSHT7OvWqy0l7awZck+LAB+MPe6Egu56zLnC7ITeKrOeSAv/VQ== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=nxp.com; dmarc=pass action=none header.from=nxp.com; dkim=pass header.d=nxp.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=nxp.com; s=selector2; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=3TnEZzWey7sU73RtYvDyCdH1M3xKwHMzOaUS3FB5/ik=; b=chHajl01TvoQa9XdQ5Z/8m/fXTUpljp+EeV9Am/rjSG4M3LZLUQOFOifSxZYsKE8kf3mrP9xRBjk9t+jIB9BMBY4opmxg51gmYK56d2ULSeZMCipahJdxcYbnJI8qChgUh/CgspM8Q8SsjcjroosO0ahUioYWhUfmdte9hFJfAc= Received: from AM0PR0402MB3556.eurprd04.prod.outlook.com (52.133.43.147) by AM0PR0402MB3570.eurprd04.prod.outlook.com (52.133.46.11) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.2729.23; Thu, 13 Feb 2020 10:36:49 +0000 Received: from AM0PR0402MB3556.eurprd04.prod.outlook.com ([fe80::918a:1621:497d:eac3]) by AM0PR0402MB3556.eurprd04.prod.outlook.com ([fe80::918a:1621:497d:eac3%7]) with mapi id 15.20.2707.031; Thu, 13 Feb 2020 10:36:48 +0000 From: Kuldeep Singh To: Pratyush Yadav , Tudor Ambarus , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , Mark Brown , "alexander.sverdlin@nokia.com" Subject: RE: [EXT] [PATCH 9/9] mtd: spi-nor: add support for Cypress Semper flash Thread-Topic: [EXT] [PATCH 9/9] mtd: spi-nor: add support for Cypress Semper flash Thread-Index: AQHV4OAD4cj1SRIK/02+bS4dVIBMLagY5ioQ Date: Thu, 13 Feb 2020 10:36:48 +0000 Message-ID: References: <20200211133348.15558-1-p.yadav@ti.com> <20200211133348.15558-10-p.yadav@ti.com> In-Reply-To: <20200211133348.15558-10-p.yadav@ti.com> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: authentication-results: spf=none (sender IP is ) smtp.mailfrom=kuldeep.singh@nxp.com; x-originating-ip: [92.120.1.70] x-ms-publictraffictype: Email x-ms-office365-filtering-ht: Tenant x-ms-office365-filtering-correlation-id: e2ee7d9e-4d83-4b45-fa80-08d7b070a16a x-ms-traffictypediagnostic: AM0PR0402MB3570: x-microsoft-antispam-prvs: x-ms-oob-tlc-oobclassifiers: OLM:10000; x-forefront-prvs: 031257FE13 x-forefront-antispam-report: SFV:NSPM; SFS:(10009020)(4636009)(39860400002)(136003)(396003)(376002)(366004)(346002)(199004)(189003)(4326008)(186003)(30864003)(55016002)(26005)(6506007)(53546011)(76116006)(66946007)(316002)(478600001)(2906002)(64756008)(966005)(66476007)(66556008)(66446008)(71200400001)(9686003)(44832011)(52536014)(5660300002)(33656002)(81166006)(54906003)(110136005)(81156014)(8936002)(7696005)(86362001)(8676002)(7416002); DIR:OUT; SFP:1101; SCL:1; SRVR:AM0PR0402MB3570; H:AM0PR0402MB3556.eurprd04.prod.outlook.com; FPR:; SPF:None; LANG:en; PTR:InfoNoRecords; A:1; MX:1; received-spf: None (protection.outlook.com: nxp.com does not designate permitted sender hosts) x-ms-exchange-senderadcheck: 1 x-microsoft-antispam: BCL:0; x-microsoft-antispam-message-info: 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 x-ms-exchange-antispam-messagedata: huiOr64nzZPihzrf2uVAqu28t2ai9YBWg46hUvkCJvAYqiMTzKqAUv66lY0QnAQmy+AjLvAHBFlZMZfQGZDwQlFpyL4Sl7dNEN+VkxcNA1b4LdQbg9DovVYFNKHj2DbWkgvElTbtvq/uFEVo5V2qww== x-ms-exchange-transport-forked: True MIME-Version: 1.0 X-OriginatorOrg: nxp.com X-MS-Exchange-CrossTenant-Network-Message-Id: e2ee7d9e-4d83-4b45-fa80-08d7b070a16a X-MS-Exchange-CrossTenant-originalarrivaltime: 13 Feb 2020 10:36:48.6553 (UTC) X-MS-Exchange-CrossTenant-fromentityheader: Hosted X-MS-Exchange-CrossTenant-id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635 X-MS-Exchange-CrossTenant-mailboxtype: HOSTED X-MS-Exchange-CrossTenant-userprincipalname: 319mb0x8oRxtzSUp+nEWkR8wtdGJZbnnY1yGfNn+dUr6nhJbKulYEIg2biBqC7W9NorihCvRhiIYo/x7uWx3sw== X-MS-Exchange-Transport-CrossTenantHeadersStamped: AM0PR0402MB3570 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200213_023653_591568_F1AADF2C X-CRM114-Status: GOOD ( 25.28 ) X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Sekhar Nori , "linux-mtd@lists.infradead.org" , "linux-kernel@vger.kernel.org" , "linux-spi@vger.kernel.org" Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-mtd" Errors-To: linux-mtd-bounces+linux-mtd=archiver.kernel.org@lists.infradead.org +Alexander Hi Tudor, Vignesh, Pratyush, > -----Original Message----- > From: linux-kernel-owner@vger.kernel.org owner@vger.kernel.org> On Behalf Of Pratyush Yadav > Sent: Tuesday, February 11, 2020 7:04 PM > To: Tudor Ambarus ; Miquel Raynal > ; Richard Weinberger ; > Vignesh Raghavendra ; Mark Brown > > Cc: linux-mtd@lists.infradead.org; linux-kernel@vger.kernel.org; linux- > spi@vger.kernel.org; Sekhar Nori ; Pratyush Yadav > > Subject: [EXT] [PATCH 9/9] mtd: spi-nor: add support for Cypress Semper > flash > > Caution: EXT Email > > The Cypress Semper flash is an xSPI compliant octal DTR flash. Add support > for using it in octal DTR mode. > > The flash by default boots in a hybrid sector mode. Switch to uniform sector > mode on boot. Use the default 20 dummy cycles for a read fast command. > > The SFDP programming on some older versions of the flash was incorrect. > Fixes for that are included in the fixup hooks. > > Signed-off-by: Pratyush Yadav > --- > drivers/mtd/spi-nor/spi-nor.c | 192 > ++++++++++++++++++++++++++++++++++ > include/linux/mtd/spi-nor.h | 14 +++ > 2 files changed, 206 insertions(+) > > diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c > index 78e3475fa2a9..367e3d0f65aa 100644 > --- a/drivers/mtd/spi-nor/spi-nor.c > +++ b/drivers/mtd/spi-nor/spi-nor.c > @@ -260,6 +260,12 @@ struct flash_info { > > #define JEDEC_MFR(info) ((info)->id[0]) > > +/* Forward declarations that will be used by s28hs512t_setup(). */ > +static int spi_nor_default_setup(struct spi_nor *nor, > + const struct spi_nor_hwcaps *hwcaps); > +static void spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, > + u8 opcode, enum spi_nor_protocol > +proto); > + > /** > * spi_nor_spimem_setup_op() - Set up common properties of a spi-mem > op. > * @nor: pointer to a 'struct spi_nor' > @@ -2241,6 +2247,65 @@ static int spi_nor_is_locked(struct mtd_info > *mtd, loff_t ofs, uint64_t len) > return ret; > } > > +/** > + * spi_nor_cypress_octal_enable() - Enable octal DTR mode on Cypress > flashes. > + * @nor: pointer to a 'struct spi_nor' > + * > + * This also sets the memory access latency cycles to 20, which is the > +default > + * in the spi-nor framework. > + * > + * Return: 0 on success, -errno otherwise. > + */ > +static int spi_nor_cypress_octal_enable(struct spi_nor *nor) { > + struct spi_mem_op op; > + u8 *buf = nor->bouncebuf; > + u8 addr_width = 3; > + int ret; > + > + /* Use 20 dummy cycles for memory array reads. */ > + ret = spi_nor_write_enable(nor); > + if (ret) > + return ret; > + > + *buf = SPINOR_REG_CYPRESS_CFR2V_MEMLAT_8_20; > + op = (struct > spi_mem_op)SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, > 1), > + SPI_MEM_OP_ADDR(addr_width, > SPINOR_REG_CYPRESS_CFR2V, 1), > + SPI_MEM_OP_NO_DUMMY, > + SPI_MEM_OP_DATA_OUT(1, buf, 1)); > + ret = spi_mem_exec_op(nor->spimem, &op); > + if (ret) { > + dev_warn(nor->dev, > + "failed to set default memory latency value: %d\n", > + ret); > + return ret; > + } > + ret = spi_nor_wait_till_ready(nor); > + if (ret) > + return ret; > + > + nor->params.reads[SNOR_CMD_READ_8_8_8_DTR].num_wait_states > = 20; > + nor- > >params.reads[SNOR_CMD_READ_8_8_8_DTR].num_mode_clocks = 0; > + > + /* Set the octal and DTR enable bits. */ > + ret = spi_nor_write_enable(nor); > + if (ret) > + return ret; > + > + *buf = SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN; > + op = (struct > spi_mem_op)SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, > 1), > + SPI_MEM_OP_ADDR(addr_width, > SPINOR_REG_CYPRESS_CFR5V, 1), > + SPI_MEM_OP_NO_DUMMY, > + SPI_MEM_OP_DATA_OUT(1, buf, 1)); > + ret = spi_mem_exec_op(nor->spimem, &op); > + if (ret) { > + dev_warn(nor->dev, "Failed to enable octal DTR mode\n"); > + return ret; > + } > + > + return 0; > +} > + > /** > * spi_nor_sr1_bit6_quad_enable() - Set the Quad Enable BIT(6) in the > Status > * Register 1. > @@ -2453,6 +2518,130 @@ static struct spi_nor_fixups gd25q256_fixups = > { > .default_init = gd25q256_default_init, }; > > +static int s28hs512t_setup(struct spi_nor *nor, > + const struct spi_nor_hwcaps *hwcaps) { > + struct spi_mem_op op; > + u8 *buf = nor->bouncebuf; > + u8 addr_width = 3; > + int ret; > + > + if (!nor->spimem) { > + dev_err(nor->dev, > + "operation not supported for non-spimem drivers\n"); > + return -ENOTSUPP; > + } > + > + /* > + * This Cypress flash also supports hybrid sector sizes. Make sure > + * uniform sector mode is selected. This is done by setting the bit > + * CFR3N[3]. > + */ > + op = (struct spi_mem_op) > + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 1), > + SPI_MEM_OP_ADDR(addr_width, > SPINOR_REG_CYPRESS_CFR3N, 1), > + SPI_MEM_OP_NO_DUMMY, > + SPI_MEM_OP_DATA_IN(1, buf, 1)); > + ret = spi_mem_exec_op(nor->spimem, &op); > + if (ret) > + return ret; > + > + ret = spi_nor_write_enable(nor); > + if (ret) > + return ret; > + > + /* Set the uniform sector mode bit. */ > + *buf |= SPINOR_REG_CYPRESS_CFR3N_UNISECT; > + op = (struct spi_mem_op) > + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1), > + SPI_MEM_OP_ADDR(addr_width, > SPINOR_REG_CYPRESS_CFR3N, 1), > + SPI_MEM_OP_NO_DUMMY, > + SPI_MEM_OP_DATA_OUT(1, buf, 1)); > + ret = spi_mem_exec_op(nor->spimem, &op); > + if (ret) { > + dev_err(nor->dev, "Failed to change to uniform sector mode\n"); > + return ret; > + } > + > + ret = spi_nor_wait_till_ready(nor); > + if (ret) > + return ret; > + > + return spi_nor_default_setup(nor, hwcaps); } > + > +static void s28hs512t_default_init(struct spi_nor *nor) { > + nor->params.octal_dtr_enable = spi_nor_cypress_octal_enable; > + nor->params.setup = s28hs512t_setup; } > + > +static void s28hs512t_post_sfdp_fixup(struct spi_nor *nor) { > + /* > + * On older versions of the flash the xSPI Profile 1.0 table has the > + * 8D-8D-8D Fast Read opcode as 0x00. But it actually should be 0xEE. > + */ > + if (nor->params.reads[SNOR_CMD_READ_8_8_8_DTR].opcode == 0) > + nor->params.reads[SNOR_CMD_READ_8_8_8_DTR].opcode = > + SPINOR_OP_CYPRESS_RD_FAST; > + > + /* This flash is also missing the 4-byte Page Program opcode bit. */ > + spi_nor_set_pp_settings(&nor- > >params.page_programs[SNOR_CMD_PP], > + SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1); > + /* > + * Since xSPI Page Program opcode is backward compatible with > + * Legacy SPI, use Legacy SPI opcode there as well. > + */ > + spi_nor_set_pp_settings(&nor- > >params.page_programs[SNOR_CMD_PP_8_8_8_DTR], > + SPINOR_OP_PP_4B, SNOR_PROTO_8_8_8_DTR); > + > + /* > + * The xSPI Profile 1.0 table advertises the number of additional > + * address bytes needed for Read Status Register command as 0 but > the > + * actual value for that is 4. > + */ > + nor->params.rdsr_addr_nbytes = 4; } > + > +static int s28hs512t_post_bfpt_fixup(struct spi_nor *nor, > + const struct sfdp_parameter_header *bfpt_header, > + const struct sfdp_bfpt *bfpt, > + struct spi_nor_flash_parameter > +*params) { > + struct spi_mem_op op; > + u8 *buf = nor->bouncebuf; > + u8 addr_width = 3; > + int ret; > + > + /* > + * The BFPT table advertises a 512B page size but the page size is > + * actually configurable (with the default being 256B). Read from > + * CFR3V[4] and set the correct size. > + */ > + op = (struct spi_mem_op) > + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 1), > + SPI_MEM_OP_ADDR(addr_width, > SPINOR_REG_CYPRESS_CFR3V, 1), > + SPI_MEM_OP_NO_DUMMY, > + SPI_MEM_OP_DATA_IN(1, buf, 1)); > + ret = spi_mem_exec_op(nor->spimem, &op); > + if (ret) > + return ret; > + > + if (*buf & SPINOR_REG_CYPRESS_CFR3V_PGSZ) > + params->page_size = 512; > + else > + params->page_size = 256; > + > + return 0; > +} > + > +static struct spi_nor_fixups s28hs512t_fixups = { > + .default_init = s28hs512t_default_init, > + .post_sfdp = s28hs512t_post_sfdp_fixup, > + .post_bfpt = s28hs512t_post_bfpt_fixup, }; As of now, s25fs512s flash also require post_bfpt_fixup proposed in this patch. On other thread[1], Alexander was also trying to resolve the same issue. Since s28hs512t is a hyperflash and require other fixups compared to s25fs512s flash. I have a suggestion to make. Let's make s28hs512t_ post_bfpt_fixup more generic "spansion_post_bfpt_fixup" and use that fixup for s25fs512s. A generic name will be better as this bfpt_fixup is needed for other spansion flashes as well and not only for s28hs512t. Please let me know your views. Also, please see proposed diff output on top of this patch. diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index b557c67..75da26c 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -2455,7 +2455,7 @@ static void s28hs512t_post_sfdp_fixup(struct spi_nor *nor) nor->params.rdsr_addr_nbytes = 4; } -static int s28hs512t_post_bfpt_fixup(struct spi_nor *nor, +static int spansion_post_bfpt_fixup(struct spi_nor *nor, const struct sfdp_parameter_header *bfpt_header, const struct sfdp_bfpt *bfpt, struct spi_nor_flash_parameter *params) @@ -2490,7 +2490,11 @@ static int s28hs512t_post_bfpt_fixup(struct spi_nor *nor, static struct spi_nor_fixups s28hs512t_fixups = { .default_init = s28hs512t_default_init, .post_sfdp = s28hs512t_post_sfdp_fixup, - .post_bfpt = s28hs512t_post_bfpt_fixup, + .post_bfpt = spansion_post_bfpt_fixup, +}; + +static struct spi_nor_fixups s25fs512s_fixups = { + .post_bfpt = spansion_post_bfpt_fixup, }; /* NOTE: double check command sets and memory organization when you add @@ -2732,7 +2736,8 @@ static const struct flash_info spi_nor_ids[] = { { "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | USE_CLSR) }, - { "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, + { "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) + .fixups = &s25fs512s_fixups, }, { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) }, { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) }, { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) }, Thanks Kuldeep [1] https://patchwork.ozlabs.org/patch/1233915/ > + > /* NOTE: double check command sets and memory organization when you > add > * more nor chips. This current list focusses on newer chips, which > * have been converging on command sets which including JEDEC ID. > @@ -2715,6 +2904,9 @@ static const struct flash_info spi_nor_ids[] = { > { "s25fl064l", INFO(0x016017, 0, 64 * 1024, 128, SECT_4K | > SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, > { "s25fl128l", INFO(0x016018, 0, 64 * 1024, 256, SECT_4K | > SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, > { "s25fl256l", INFO(0x016019, 0, 64 * 1024, 512, SECT_4K | > SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, > + { "s28hs512t", INFO(0x345b1a, 0, 256 * 1024, 256, SECT_4K | > SPI_NOR_OCTAL_DTR_READ) > + .fixups = &s28hs512t_fixups, > + }, > > /* SST -- large erase sizes are "overlays", "sectors" are 4K */ > { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | > SST_WRITE) }, diff --git a/include/linux/mtd/spi-nor.h > b/include/linux/mtd/spi-nor.h index c653f6713cfc..e765272fc0f4 100644 > --- a/include/linux/mtd/spi-nor.h > +++ b/include/linux/mtd/spi-nor.h > @@ -150,6 +150,20 @@ > #define SR2_QUAD_EN_BIT1 BIT(1) > #define SR2_QUAD_EN_BIT7 BIT(7) > > +/* For Cypress flash. */ > +#define SPINOR_OP_RD_ANY_REG 0x65 /* Read any register > */ > +#define SPINOR_OP_WR_ANY_REG 0x71 /* Write any register > */ > +#define SPINOR_REG_CYPRESS_CFR2V 0x00800003 > +#define SPINOR_REG_CYPRESS_CFR2V_MEMLAT_8_20 0x8 > +#define SPINOR_REG_CYPRESS_CFR3N 0x00000004 > +#define SPINOR_REG_CYPRESS_CFR3V 0x00800004 > +#define SPINOR_REG_CYPRESS_CFR3V_PGSZ BIT(4) /* Page size. */ > +#define SPINOR_REG_CYPRESS_CFR3N_UNISECT BIT(3) /* Uniform > sector mode */ > +#define SPINOR_REG_CYPRESS_CFR4V 0x00800005 > +#define SPINOR_REG_CYPRESS_CFR5V 0x00800006 > +#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN 0x3 > +#define SPINOR_OP_CYPRESS_RD_FAST 0xee > + > /* Supported SPI protocols */ > #define SNOR_PROTO_INST_MASK GENMASK(23, 16) > #define SNOR_PROTO_INST_SHIFT 16 > -- > 2.25.0 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/