From: Richard Weinberger <richard.weinberger@gmail.com>
To: Boris Stein <boris.stein@gmail.com>
Cc: linux-mtd@lists.infradead.org
Subject: Re: cannot ubiupdatevol squashfs image
Date: Tue, 10 Sep 2019 21:31:07 +0200 [thread overview]
Message-ID: <CAFLxGvz5JipAzu1x_0EPX6v-SZgxtu6n3-gZZ=DQS4FLMH0XSg@mail.gmail.com> (raw)
In-Reply-To: <CAFkQurKLwUdGSPNPLYLTrV7-fkWaL5RuP9up0nrN62L4pr-ivg@mail.gmail.com>
On Tue, Sep 10, 2019 at 3:11 PM Boris Stein <boris.stein@gmail.com> wrote:
[...]
> But then there is a failure when system boots:
[...]
> [ 5.919637] ubi0: attaching mtd25
> [ 7.038038] ubi0: scanning is finished
> [ 7.048738] ubi0: attached mtd25 (name "system", size 319 MiB)
> [ 7.048767] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
> [ 7.053530] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
> [ 7.060333] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192
> [ 7.067173] ubi0: good PEBs: 1279, bad PEBs: 0, corrupted PEBs: 0
> [ 7.073956] ubi0: user volume: 8, internal volumes: 1, max. volumes
> count: 128
> [ 7.080208] ubi0: max/mean erase counter: 2/1, WL threshold: 4096,
> image sequence number: 796905358
> [ 7.087316] ubi0: available PEBs: 0, total reserved PEBs: 1279,
> PEBs reserved for bad PEB handling: 40
> [ 7.096278] ubi0: background thread "ubi_bgt0d" started, PID 207
> [ 7.105838] cpuidle: enable-method property 'psci' found operations
> [ 7.106471] lpm_levels_of: Residency < 0 for LPM
> [ 7.106475] lpm_levels_of: idx 1 420
> [ 7.106478] lpm_levels_of: Residency < 0 for LPM
> [ 7.106480] lpm_levels_of: idx 2 500
> [ 7.106483] lpm_levels_of: idx 2 3040
> [ 7.106693] lpm_levels: register_cluster_lpm_stats()
> [ 7.108873] rmnet_ipa3 started initialization
> [ 7.109878] RNDIS_IPA module is loaded.
> [ 7.109878] audio_pdr_late_init get_service_location failed ret -19
> [ 7.110531] msm_bus_late_init: Remove handoff bw requests
> [ 7.135649] vreg_sd_mmc: disabling
> [ 7.135656] emac_phy: disabling
> [ 7.135661] rgmii_io_pads: disabling
> [ 7.135668] vreg_wlan: disabling
> [ 7.135672] ALSA devic[ 7.193476] Freeing unused kernel memory: 1024K
> /etc/mdev/iio.sh: .: line 19: can't open
> '/sys/bus/i2c/devices/*-006*/iio:device?*/uevent'
> [ 7.697004] iio.sh (216) used greatest stack depth: 6288 bytes left
> /etc/mdev/iio.sh: .: line 19: can't open
> '/sys/bus/i2c/devices/*-006*/iio:device?*/uevent'
> [ 7.730144] iio.sh (218) used greatest stack depth: 6256 bytes left
> mkdir: can't create directory '/mnt/sdcard/': No such file or directory
> mount: mounting /dev/mmcblk0p1 on /mnt/sdcard/ failed: No such file or directory
> [ 8.038745] mdev (214) used greatest stack depth: 6000 bytes left
> mdm-init : Detected block device : 25 for system
> [ 8.051651] ubi: mtd25 is already attached to ubi0ubiattach:
> error!: cannot attach mtd25
> error 17 (File exists)
> [ 8.107261] Waiting for ubinfo for md-rootfs
> [ 8.107431] Done ubinfo for md-rootfs, volume ID: 1
> [ 8.111069] Waiting for /dev/ubi0_1
> [ 8.115328] Done waiting for /dev/ubi0_1
> [ 8.124406] block ubiblock0_1: created from ubi0:1(md-rootfs)
> [ 8.125039] Waiting for /dev/ubiblock0_1
> [ 8.186355] Done waiting for /dev/ubiblock0_1
> [ 8.216688] Waiting for ubinfo for rootfs
> [ 8.216872] Done ubinfo for rootfs, volume ID: 0
> [ 8.219764] Waiting for /dev/ubi0_0
> [ 8.224833] Done waiting for /dev/ubi0_0
> [ 8.233326] block ubiblock0_0: created from ubi0:0(rootfs)
> [ 8.233943] Waiting for /dev/ubiblock0_0
> [ 8.301729] Done waiting for /dev/ubiblock0_0
> [ 8.614592] 1911 device_is_secure: #########################
> device_is_secure=0
???
> [ 8.651724] Waiting for ubinfo for md-sdatafs
> [ 8.651900] Done ubinfo for md-sdatafs, volume ID: 3
> [ 8.655158] Waiting for /dev/ubi0_3
> [ 8.660428] Done waiting for /dev/ubi0_3
> [ 8.668817] block ubiblock0_3: created from ubi0:3(md-sdatafs)
> [ 8.669459] Waiting for /dev/ubiblock0_3
> [ 8.734968] Done waiting for /dev/ubiblock0_3
> [ 8.766984] Waiting for ubinfo for sdatafs
> [ 8.767156] Done ubinfo for sdatafs, volume ID: 2
> [ 8.770369] Waiting for /dev/ubi0_2
> [ 8.774891] Done waiting for /dev/ubi0_2
> [ 8.783874] block ubiblock0_2: created from ubi0:2(sdatafs)
> [ 8.784493] Waiting for /dev/ubiblock0_2
> [ 8.851409] Done waiting for /dev/ubiblock0_2
> [ 8.913053] 1911 device_is_secure: #########################
> device_is_secure=0
???
> mount: mounting /dev on /system/dev failed: Invalid argument
> mount: mounting /dev/pts on /system/dev/pts failed: No such file or directory
wut?
> [ 9.006327] SQUASHFS error: zlib decompression failed, data probably corrupt
> [ 9.006359] SQUASHFS error: squashfs_read_data failed to read block 0x785a5a
usually squashfs has a blocksize of 1k or 4k. So block 0x785a5a is out
of bounds.
> [ 9.012677] SQUASHFS error: Unable to read fragment cache entry [785a5a]
> [ 9.019470] SQUASHFS error: Unable to read page, block 785a5a, size d6b4
> [ 9.026242] SQUASHFS error: Unable to read fragment cache entry [785a5a]
> [ 9.032876] SQUASHFS error: Unable to read page, block 785a5a, size d6b4
> [ 9.039529] SQUASHFS error: Unable to read fragment cache entry [785a5a]
> [ 9.046225] SQUASHFS error: Unable to read page, block 785a5a, size d6b4
> [ 9.052910] SQUASHFS error: Unable to read fragment cache entry [785a5a]
> [ 9.059573] SQUASHFS error: Unable to read page, block 785a5a, size d6b4
> [ 9.066281] SQUASHFS error: Unable to read fragment cache entry [785a5a]
> [ 9.072954] SQUASHFS error: Unable to read page, block 785a5a, size d6b4
>
>
> Please adivse,
There seem to be many other components involved.
Is the squashfs image actually correct?
--
Thanks,
//richard
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2019-09-10 19:31 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-10 13:10 cannot ubiupdatevol squashfs image Boris Stein
2019-09-10 19:31 ` Richard Weinberger [this message]
2019-09-10 23:55 ` David Oberhollenzer
2019-09-11 12:41 ` Boris Stein
2019-09-11 13:24 ` David Oberhollenzer
2019-09-12 7:32 ` Boris Stein
2019-09-19 11:54 ` Boris Stein
2019-09-19 13:08 ` David Oberhollenzer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAFLxGvz5JipAzu1x_0EPX6v-SZgxtu6n3-gZZ=DQS4FLMH0XSg@mail.gmail.com' \
--to=richard.weinberger@gmail.com \
--cc=boris.stein@gmail.com \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).