Linux-mtd Archive on lore.kernel.org
 help / color / Atom feed
From: Michael Nazzareno Trimarchi <michael@amarulasolutions.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: linux-mtd@lists.infradead.org,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Greg Ungerer <gerg@kernel.org>,
	Boris Brezillon <bbrezillon@kernel.org>,
	Boris Brezillon <boris.brezillon@collabora.com>
Subject: Re: GPMI iMX6ull timeout on DMA
Date: Mon, 1 Feb 2021 16:17:54 +0100
Message-ID: <CAOf5uwm6xHORBcYV8RKEvyqcmQvKofKQyReXd=rQy-imrZBPzQ@mail.gmail.com> (raw)
In-Reply-To: <20210201161433.0c4ff0e3@xps13>

Hi

On Mon, Feb 1, 2021 at 4:14 PM Miquel Raynal <miquel.raynal@bootlin.com> wrote:
>
> Hi Michael,
>
> Michael Nazzareno Trimarchi <michael@amarulasolutions.com> wrote on
> Mon, 1 Feb 2021 16:08:23 +0100:
>
> > Hi
> >
> > On Mon, Feb 1, 2021 at 3:32 PM Michael Nazzareno Trimarchi
> > <michael@amarulasolutions.com> wrote:
> > >
> > > Hi
> > >
> > > On Mon, Feb 1, 2021 at 3:13 PM Miquel Raynal <miquel.raynal@bootlin.com> wrote:
> > > >
> > > > Hi Michael,
> > > >
> > > > Michael Nazzareno Trimarchi <michael@amarulasolutions.com> wrote on
> > > > Sat, 30 Jan 2021 10:41:29 +0100:
> > > >
> > > > > Hi Miquel
> > > > >
> > > > > commit f8e6ad14388067f91b26d044185d95623fbc9535
> > > > > Author: Michael Trimarchi <michael@amarulasolutions.com>
> > > > > Date:   Fri Jan 29 08:46:53 2021 +0100
> > > > >
> > > > >     mtd: nand: Calculate the clock before enable it
> > > > >
> > > > >     Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> > > > >     Change-Id: I79b0da39de0a9b32ea0b002fa200d7f44d4f8ce7
> > > > >
> > > > > diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
> > > > > b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
> > > > > index 322a008290e5..0bca52b3bc8f 100644
> > > > > --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
> > > > > +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
> > > > > @@ -377,6 +377,7 @@ static void gpmi_nfc_compute_timings(struct
> > > > > gpmi_nand_data *this,
> > > > >                                      const struct nand_sdr_timings *sdr)
> > > > >  {
> > > > >         struct gpmi_nfc_hardware_timing *hw = &this->hw;
> > > > > +       struct resources *r = &this->resources;
> > > > >         unsigned int dll_threshold_ps = this->devdata->max_chain_delay;
> > > > >         unsigned int period_ps, reference_period_ps;
> > > > >         unsigned int data_setup_cycles, data_hold_cycles, addr_setup_cycles;
> > > > > @@ -440,6 +441,8 @@ static void gpmi_nfc_compute_timings(struct
> > > > > gpmi_nand_data *this,
> > > > >                 hw->ctrl1n |= BF_GPMI_CTRL1_RDN_DELAY(sample_delay_factor) |
> > > > >                               BM_GPMI_CTRL1_DLL_ENABLE |
> > > > >                               (use_half_period ? BM_GPMI_CTRL1_HALF_PERIOD : 0);
> > > > > +
> > > > > +       clk_set_rate(r->clock[0], hw->clk_rate);
> > > > >  }
> > > > >
> > > > >  void gpmi_nfc_apply_timings(struct gpmi_nand_data *this)
> > > > > @@ -449,8 +452,6 @@ void gpmi_nfc_apply_timings(struct gpmi_nand_data *this)
> > > > >         void __iomem *gpmi_regs = r->gpmi_regs;
> > > > >         unsigned int dll_wait_time_us;
> > > > >
> > > > > -       clk_set_rate(r->clock[0], hw->clk_rate);
> > > > > -
> > > > >         writel(hw->timing0, gpmi_regs + HW_GPMI_TIMING0);
> > > > >         writel(hw->timing1, gpmi_regs + HW_GPMI_TIMING1);
> > > > >
> > > > > Right now I have this change applied and seems fine. That is the only
> > > > > difference I get. Clock is apply a bit earlier that when is enabled
> > > > > it.
> > > >
> > > > This is very interesting. So this would mean the issue you are
> > > > experiencing comes from the clock driver which kind of returns too
> > > > early from clk_set_rate()? Could you report this to the clk ML/NXP clk
> > > > maintainers and keep us in copy? If it is as global as it sounds, we
> > > > might not be the only ones affected.
> > > >
> > >
> > > The imx28 is broken too, so it's a general problem. I need to trace it down
> > > I have a reverting for lts but it\s not the way to go
> > >
> >
> > For imx28 you ask to set the rate to 22Mhz but you don't care about the clock
> > that you get back. You get back 12Mhz because the base clock is 24 Mhz and seems
> > that it can not get the point. You need to check if the clock
> > requested is in range or ask
> > for set_rate_clk_min to avoid to have somenthing lower. Then for
> > imx6ull because is sporadic
> > I think that is more connected to the clk_set_rate and when you change
> > the register. Can not be a
> > setting time?
>
> So, if I understand correctly, we face two different problems:
> - imx6*: seems like a clock issue regarding the clock settlement
> - imx28: actual NAND driver issue (does not check the validity of the
>   new frequency). This should be handled properly in
>   ->setup_interface().

I'm planning to work on it, I need to deliver on the field updates on
the new LTS release.
Everything is correct what you said. I will check and try to fix the
issues properly after this

Michael

>
> Thanks,
> Miquèl



-- 
Michael Nazzareno Trimarchi
Amarula Solutions BV
COO Co-Founder
Cruquiuskade 47 Amsterdam 1018 AM NL
T. +31(0)851119172
M. +39(0)3479132170
[`as] https://www.amarulasolutions.com

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply index

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-29  6:41 Greg Ungerer
2019-07-29  8:36 ` Miquel Raynal
2019-07-29  8:42   ` Michael Nazzareno Trimarchi
2019-07-29 12:18     ` Greg Ungerer
2019-07-29 12:20       ` Michael Nazzareno Trimarchi
2019-07-29 12:33   ` Greg Ungerer
2019-07-29 12:47     ` Miquel Raynal
2019-07-29 12:49       ` Michael Nazzareno Trimarchi
2019-07-29 12:55         ` Miquel Raynal
2019-07-29 13:00           ` Michael Nazzareno Trimarchi
2019-07-29 13:22             ` Miquel Raynal
2019-07-29 20:00               ` Michael Nazzareno Trimarchi
2019-07-29 21:02                 ` Miquel Raynal
2019-07-30  0:28       ` Greg Ungerer
2019-07-30  0:41         ` Greg Ungerer
2019-07-30  6:06           ` Greg Ungerer
2019-07-30  8:38             ` Miquel Raynal
2019-07-30  8:58               ` Boris Brezillon
2019-07-31  2:05               ` Greg Ungerer
2019-07-31  6:28                 ` Boris Brezillon
2019-08-02  7:19                   ` Greg Ungerer
2019-08-02 12:34                   ` Greg Ungerer
2019-08-02 12:51                     ` Boris Brezillon
2019-08-05  5:51                       ` Greg Ungerer
2019-08-07 16:05                         ` Miquel Raynal
2019-08-08  0:43                           ` Greg Ungerer
2019-08-08 16:36                         ` Boris Brezillon
2019-08-09  5:20                           ` Greg Ungerer
2019-08-09  6:23                             ` Boris Brezillon
2019-08-09  6:55                               ` Greg Ungerer
2019-08-09  7:32                                 ` Boris Brezillon
2019-08-09 13:57                                   ` Greg Ungerer
2019-08-09 13:59                                     ` Boris Brezillon
2019-08-12  2:50                                       ` Greg Ungerer
2019-08-12  4:04                                         ` Greg Ungerer
2019-08-12  7:31                                         ` Boris Brezillon
2019-08-13  0:50                                           ` Greg Ungerer
2021-01-28  9:45                                             ` Michael Nazzareno Trimarchi
2021-01-28 10:26                                               ` Miquel Raynal
2021-01-28 10:35                                                 ` Michael Nazzareno Trimarchi
2021-01-28 11:55                                                   ` Michael Nazzareno Trimarchi
2021-01-29 12:43                                               ` Greg Ungerer
2021-01-30  9:41                                                 ` Michael Nazzareno Trimarchi
2021-02-01 14:13                                                   ` Miquel Raynal
2021-02-01 14:32                                                     ` Michael Nazzareno Trimarchi
2021-02-01 15:08                                                       ` Michael Nazzareno Trimarchi
2021-02-01 15:14                                                         ` Miquel Raynal
2021-02-01 15:17                                                           ` Michael Nazzareno Trimarchi [this message]
  -- strict thread matches above, loose matches on Subject: below --
2018-10-02 13:22 GPMI IMX6ull timeout on dma Michael Nazzareno Trimarchi
2018-10-04 14:36 ` Michael Nazzareno Trimarchi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAOf5uwm6xHORBcYV8RKEvyqcmQvKofKQyReXd=rQy-imrZBPzQ@mail.gmail.com' \
    --to=michael@amarulasolutions.com \
    --cc=bbrezillon@kernel.org \
    --cc=boris.brezillon@collabora.com \
    --cc=gerg@kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mtd Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mtd/0 linux-mtd/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mtd linux-mtd/ https://lore.kernel.org/linux-mtd \
		linux-mtd@lists.infradead.org
	public-inbox-index linux-mtd

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-mtd


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git