From: Alexander Shiyan <eagle.alexander923@gmail.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
JaimeLiao <jaimeliao.tw@gmail.com>,
linux-mtd@lists.infradead.org
Subject: Boot failed after patch "mtd: rawnand: Support for sequential cache reads"
Date: Thu, 25 May 2023 10:48:39 +0300 [thread overview]
Message-ID: <CAP1tNvS=NVAm-vfvYWbc3k9Cx9YxMc2uZZkmXk8h1NhGX877Zg@mail.gmail.com> (raw)
Hello.
Kernel boot fails after patch "mtd: rawnand: Support for sequential
cache reads" (thanks to git bisect).
Please advise what can be done here and where to look for a bug.
Thanks.
...
omap-gpmc 50000000.gpmc: GPMC revision 6.0
...
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
...
VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
devtmpfs: mounted
Freeing unused kernel image (initmem) memory: 1024K
Run /sbin/init as init process
SQUASHFS error: lzo decompression failed, data probably corrupt
SQUASHFS error: Failed to read block 0xd291c2: -5
SQUASHFS error: lzo decompression failed, data probably corrupt
SQUASHFS error: Failed to read block 0xd291c2: -5
SQUASHFS error: Unable to read data cache entry [d291c2]
SQUASHFS error: Unable to read page, block d291c2, size 14307
SQUASHFS error: Unable to read data cache entry [d291c2]
SQUASHFS error: Unable to read page, block d291c2, size 14307
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007
CPU: 0 PID: 1 Comm: init Not tainted 6.3.0+ #105
Hardware name: Generic AM33XX (Flattened Device Tree)
unwind_backtrace from show_stack+0xb/0xc
show_stack from dump_stack_lvl+0x2b/0x34
dump_stack_lvl from panic+0xbd/0x230
panic from make_task_dead+0x1/0x120
make_task_dead from 0xc102ca80
---[ end Kernel panic - not syncing: Attempted to kill init!
exitcode=0x00000007 ]---
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next reply other threads:[~2023-05-25 7:49 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-25 7:48 Alexander Shiyan [this message]
2023-05-26 18:14 ` Boot failed after patch "mtd: rawnand: Support for sequential cache reads" Miquel Raynal
2023-05-29 6:10 ` Alexander Shiyan
2023-05-29 8:12 ` Miquel Raynal
2023-05-29 10:33 ` Alexander Shiyan
2023-05-29 11:46 ` Miquel Raynal
2023-05-30 14:48 ` [EXT] " Bean Huo
2023-05-31 9:02 ` Alexander Shiyan
2023-06-01 7:37 ` Miquel Raynal
2023-06-01 16:55 ` Bean Huo
2023-06-02 9:52 ` Alexander Shiyan
2023-06-05 8:39 ` Miquel Raynal
2023-06-05 15:45 ` Bean Huo
2023-06-26 9:22 ` Bean Huo
2023-07-03 9:16 ` Alexander Shiyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAP1tNvS=NVAm-vfvYWbc3k9Cx9YxMc2uZZkmXk8h1NhGX877Zg@mail.gmail.com' \
--to=eagle.alexander923@gmail.com \
--cc=jaimeliao.tw@gmail.com \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).