Linux-mtd Archive on lore.kernel.org
 help / color / Atom feed
From: Naga Sureshkumar Relli <nagasure@xilinx.com>
To: "Tudor.Ambarus@microchip.com" <Tudor.Ambarus@microchip.com>,
	"boris.brezillon@collabora.com" <boris.brezillon@collabora.com>,
	"marek.vasut@gmail.com" <marek.vasut@gmail.com>,
	"vigneshr@ti.com" <vigneshr@ti.com>
Cc: "richard@nod.at" <richard@nod.at>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
	"miquel.raynal@bootlin.com" <miquel.raynal@bootlin.com>,
	"computersforpeace@gmail.com" <computersforpeace@gmail.com>,
	"dwmw2@infradead.org" <dwmw2@infradead.org>
Subject: RE: [PATCH 5/6] mtd: spi-nor: Add s3an_post_sfdp_fixups()
Date: Wed, 31 Jul 2019 12:31:19 +0000
Message-ID: <MN2PR02MB5727FF8617B1A2FC89739601AFDF0@MN2PR02MB5727.namprd02.prod.outlook.com> (raw)
In-Reply-To: <20190731091145.27374-6-tudor.ambarus@microchip.com>

Hi Tudor,

Thanks for the updates. With these kind of updates, we can add Vendor specific
Code easily, like Xilinx Dual parallel and stacked modes.
In these configurations we need to tweak the nor parameters like page_size, sectors etc.
So with the help of these patches. we can easily update these parameters.

> -----Original Message-----
> From: linux-mtd <linux-mtd-bounces@lists.infradead.org> On Behalf Of
> Tudor.Ambarus@microchip.com
> Sent: Wednesday, July 31, 2019 2:42 PM
> To: boris.brezillon@collabora.com; marek.vasut@gmail.com; vigneshr@ti.com
> Cc: Tudor.Ambarus@microchip.com; richard@nod.at; linux-kernel@vger.kernel.org; linux-
> mtd@lists.infradead.org; miquel.raynal@bootlin.com; computersforpeace@gmail.com;
> dwmw2@infradead.org
> Subject: [PATCH 5/6] mtd: spi-nor: Add s3an_post_sfdp_fixups()
> 
> From: Tudor Ambarus <tudor.ambarus@microchip.com>
> 
> s3an_nor_scan() was overriding the opcode selection done in spi_nor_default_setup(). Set nor-
> >setup() method in order to avoid unnecessary call to spi_nor_default_setup().
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
>  drivers/mtd/spi-nor/spi-nor.c | 35 +++++++++++++++++++++++++----------
>  1 file changed, 25 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index
> 0ff474e5e4f5..5fea5d7ce2cb 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -2795,7 +2795,9 @@ static int spi_nor_check(struct spi_nor *nor)
>  	return 0;
>  }
> 
> -static int s3an_nor_scan(struct spi_nor *nor)
> +static int s3an_nor_setup(struct spi_nor *nor,
> +			  const struct spi_nor_flash_parameter *params,
> +			  const struct spi_nor_hwcaps *hwcaps)
>  {
>  	int ret;
>  	u8 val;
> @@ -4393,6 +4395,11 @@ static void spansion_post_sfdp_fixups(struct spi_nor *nor)
>  	nor->mtd.erasesize = nor->info->sector_size;  }
> 
> +static void s3an_post_sfdp_fixups(struct spi_nor *nor) {
> +	nor->setup = s3an_nor_setup;
> +}
> +
>  static void
>  spi_nor_manufacturer_post_sfdp_fixups(struct spi_nor *nor,
>  				      struct spi_nor_flash_parameter *params) @@ -4405,6
> +4412,9 @@ spi_nor_manufacturer_post_sfdp_fixups(struct spi_nor *nor,
>  	default:
>  		break;
>  	}
> +
> +	if (nor->info->flags & SPI_S3AN)
> +		s3an_post_sfdp_fixups(nor);
>  }
>
Instead of checking the flags, why can't we call directly the nor_fixups?
like Boris implementation nor->info->fixups->post_sfdp()
https://patchwork.ozlabs.org/patch/1009291/

Thanks,
Naga Sureshkumar Relli

>  static void spi_nor_post_sfdp_fixups(struct spi_nor *nor, @@ -4582,9 +4592,9 @@ static
> int spi_nor_select_erase(struct spi_nor *nor, u32 wanted_size)
>  	return 0;
>  }
> 
> -static int spi_nor_setup(struct spi_nor *nor,
> -			 const struct spi_nor_flash_parameter *params,
> -			 const struct spi_nor_hwcaps *hwcaps)
> +static int spi_nor_default_setup(struct spi_nor *nor,
> +				 const struct spi_nor_flash_parameter *params,
> +				 const struct spi_nor_hwcaps *hwcaps)
>  {
>  	u32 ignored_mask, shared_mask;
>  	int err;
> @@ -4641,6 +4651,16 @@ static int spi_nor_setup(struct spi_nor *nor,
>  	return err;
>  }
> 
> +static int spi_nor_setup(struct spi_nor *nor,
> +			 const struct spi_nor_flash_parameter *params,
> +			 const struct spi_nor_hwcaps *hwcaps) {
> +	if (!nor->setup)
> +		return 0;
> +
> +	return nor->setup(nor, params, hwcaps); }
> +
>  static int spi_nor_disable_write_protection(struct spi_nor *nor)  {
>  	if (!nor->disable_write_protection)
> @@ -4804,6 +4824,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
>  	/* Kept only for backward compatibility purpose. */
>  	nor->quad_enable = spansion_quad_enable;
>  	nor->set_4byte = spansion_set_4byte;
> +	nor->setup = spi_nor_default_setup;
> 
>  	/* Default locking operations. */
>  	if (info->flags & SPI_NOR_HAS_LOCK) {
> @@ -4905,12 +4926,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
>  		return -EINVAL;
>  	}
> 
> -	if (info->flags & SPI_S3AN) {
> -		ret = s3an_nor_scan(nor);
> -		if (ret)
> -			return ret;
> -	}
> -
>  	/* Send all the required SPI flash commands to initialize device */
>  	ret = spi_nor_init(nor);
>  	if (ret)
> --
> 2.9.5
> 
> 
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply index

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-31  9:12 [PATCH 0/6] mtd: spi-nor: move manuf out of the core - batch 2 Tudor.Ambarus
2019-07-31  9:12 ` [PATCH 1/6] mtd: spi-nor: Add post_sfdp() hook to tweak flash config Tudor.Ambarus
2019-07-31  9:12 ` [PATCH 2/6] mtd: spi-nor: Add spansion_post_sfdp_fixups() Tudor.Ambarus
2019-07-31  9:12 ` [PATCH 3/6] mtd: spi-nor: Add a ->convert_addr() method Tudor.Ambarus
2019-07-31  9:12 ` [PATCH 4/6] mtd: spi_nor: Add nor->setup() method Tudor.Ambarus
2019-08-01  6:36   ` Boris Brezillon
2019-08-05  6:37     ` Tudor.Ambarus
2019-07-31  9:12 ` [PATCH 5/6] mtd: spi-nor: Add s3an_post_sfdp_fixups() Tudor.Ambarus
2019-07-31 12:31   ` Naga Sureshkumar Relli [this message]
2019-07-31 12:38     ` Boris Brezillon
2019-08-01  4:47       ` Naga Sureshkumar Relli
2019-07-31 13:06     ` Tudor.Ambarus
2019-08-01  4:47       ` Naga Sureshkumar Relli
2019-08-01  6:42   ` Boris Brezillon
2019-08-05  6:40     ` Tudor.Ambarus
2019-07-31  9:12 ` [PATCH 6/6] mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag Tudor.Ambarus
2019-08-05  5:14   ` Vignesh Raghavendra
2019-08-05  7:32     ` Tudor.Ambarus

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=MN2PR02MB5727FF8617B1A2FC89739601AFDF0@MN2PR02MB5727.namprd02.prod.outlook.com \
    --to=nagasure@xilinx.com \
    --cc=Tudor.Ambarus@microchip.com \
    --cc=boris.brezillon@collabora.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mtd Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mtd/0 linux-mtd/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mtd linux-mtd/ https://lore.kernel.org/linux-mtd \
		linux-mtd@lists.infradead.org linux-mtd@archiver.kernel.org
	public-inbox-index linux-mtd

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-mtd


AGPL code for this site: git clone https://public-inbox.org/ public-inbox