Linux-mtd Archive on lore.kernel.org
 help / color / Atom feed
From: Vignesh Raghavendra <vigneshr@ti.com>
To: "Ramuthevar,Vadivel MuruganX"
	<vadivel.muruganx.ramuthevar@linux.intel.com>,
	<linux-mtd@lists.infradead.org>
Cc: cheol.yong.kim@intel.com, devicetree@vger.kernel.org,
	tudor.ambarus@gmail.com, andriy.shevchenko@intel.com,
	boris.brezillon@free-electrons.com, richard@nod.at,
	qi-ming.wu@intel.com, linux-kernel@vger.kernel.org,
	david.oberhollenzer@sigma-star.at, miquel.raynal@bootlin.com,
	jwboyer@gmail.com, computersforpeace@gmail.com,
	dwmw2@infradead.org, cyrille.pitchen@atmel.com
Subject: Re: [PATCH v3 3/3] mtd: spi-nor: cadence-quadspi: disable the auto-poll for Intel LGM
Date: Wed, 16 Oct 2019 14:10:31 +0530
Message-ID: <a4d45efe-907f-6c87-c650-5ad19942f0e4@ti.com> (raw)
In-Reply-To: <20190909104733.14273-4-vadivel.muruganx.ramuthevar@linux.intel.com>



On 09/09/19 4:17 PM, Ramuthevar,Vadivel MuruganX wrote:
> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
> 
> On Intel's Lightning Mountain(LGM) SoC QSPI controller do not auto-poll.
> This patch introduces to properly disable the auto-polling feature to

This patch disables auto polling when direct access mode is disabled
which should be noted in the commit message.

> improve the performance of cadence-quadspi.

How does this improve performance of cadence-quadspi? I would expect HW
auto-polling to be faster than SW polling.

> 
> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
> ---
>  drivers/mtd/spi-nor/cadence-quadspi.c | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
> index 73b9fbd1508a..60998eaad1cc 100644
> --- a/drivers/mtd/spi-nor/cadence-quadspi.c
> +++ b/drivers/mtd/spi-nor/cadence-quadspi.c
> @@ -135,6 +135,8 @@ struct cqspi_driver_platdata {
>  #define CQSPI_REG_RD_INSTR_TYPE_DATA_MASK	0x3
>  #define CQSPI_REG_RD_INSTR_DUMMY_MASK		0x1F
>  
> +#define CQSPI_REG_WR_COMPLETION_CTRL		0x38
> +#define CQSPI_REG_WR_COMPLETION_DISABLE_AUTO_POLL	BIT(14)
>  #define CQSPI_REG_WR_INSTR			0x08
>  #define CQSPI_REG_WR_INSTR_OPCODE_LSB		0
>  #define CQSPI_REG_WR_INSTR_TYPE_ADDR_LSB	12
> @@ -471,6 +473,18 @@ static int cqspi_command_write_addr(struct spi_nor *nor,
>  	return cqspi_exec_flash_cmd(cqspi, reg);
>  }
>  
> +static int cqspi_disable_auto_poll(struct cqspi_st *cqspi)
> +{
> +	void __iomem *reg_base = cqspi->iobase;
> +	unsigned int reg;
> +
> +	reg = readl(reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
> +	reg |= CQSPI_REG_WR_COMPLETION_DISABLE_AUTO_POLL;
> +	writel(reg, reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
> +
> +	return 0;
> +}
> +
>  static int cqspi_read_setup(struct spi_nor *nor)
>  {
>  	struct cqspi_flash_pdata *f_pdata = nor->priv;
> @@ -508,6 +522,11 @@ static int cqspi_read_setup(struct spi_nor *nor)
>  	reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
>  	reg |= (nor->addr_width - 1);
>  	writel(reg, reg_base + CQSPI_REG_SIZE);
> +
> +	/* Disable auto-polling */
> +	if (!f_pdata->use_direct_mode)
> +		cqspi_disable_auto_poll(cqspi);
> +
>  	return 0;
>  }
>  

Hmmm.. There is no need to disable polling for every read/write
operation. It should be enough to do it once in cqspi_controller_init()



> @@ -627,6 +646,11 @@ static int cqspi_write_setup(struct spi_nor *nor)
>  	reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
>  	reg |= (nor->addr_width - 1);
>  	writel(reg, reg_base + CQSPI_REG_SIZE);
> +
> +	/* Disable auto-polling */
> +	if (!f_pdata->use_direct_mode)
> +		cqspi_disable_auto_poll(cqspi);
> +
>  	return 0;
>  }
>  
> 

-- 
Regards
Vignesh

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-09 10:47 [PATCH v3 0/3] mtd: cadence-qspi:add support for Intel lgm-qspi Ramuthevar, Vadivel MuruganX
2019-09-09 10:47 ` [PATCH v3 1/3] dt-bindings: " Ramuthevar, Vadivel MuruganX
2019-09-09 10:47 ` [PATCH v3 2/3] mtd: spi-nor: cadence-quadspi: Disable the DAC for Intel LGM SoC Ramuthevar, Vadivel MuruganX
2019-10-16  8:32   ` Vignesh Raghavendra
2019-10-16  8:48     ` Ramuthevar, Vadivel MuruganX
2019-09-09 10:47 ` [PATCH v3 3/3] mtd: spi-nor: cadence-quadspi: disable the auto-poll for Intel LGM Ramuthevar, Vadivel MuruganX
2019-10-16  8:40   ` Vignesh Raghavendra [this message]
2019-10-16  8:53     ` Ramuthevar, Vadivel MuruganX

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a4d45efe-907f-6c87-c650-5ad19942f0e4@ti.com \
    --to=vigneshr@ti.com \
    --cc=andriy.shevchenko@intel.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=cheol.yong.kim@intel.com \
    --cc=computersforpeace@gmail.com \
    --cc=cyrille.pitchen@atmel.com \
    --cc=david.oberhollenzer@sigma-star.at \
    --cc=devicetree@vger.kernel.org \
    --cc=dwmw2@infradead.org \
    --cc=jwboyer@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=qi-ming.wu@intel.com \
    --cc=richard@nod.at \
    --cc=tudor.ambarus@gmail.com \
    --cc=vadivel.muruganx.ramuthevar@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mtd Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mtd/0 linux-mtd/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mtd linux-mtd/ https://lore.kernel.org/linux-mtd \
		linux-mtd@lists.infradead.org
	public-inbox-index linux-mtd

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-mtd


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git