Re: [PATCH v2 1/3] mtd: spi-nor: add support for is25wp256

[Paul Walmsley <paul.walmsley@sifive.com>]

On Sun, 28 Apr 2019, Sagar Shrikant Kadam wrote:

> Update spi_nor_id tablet for is25wp256 (32MB)device from ISSI,
> present on HiFive Unleashed dev board (Rev: A00).
> 
> Set method to enable quad mode for ISSI device in flash parameters
> table.

This patch was based on one originally written by Wes and/or Palmer: 
https://github.com/riscv/riscv-linux/commit/c94e267766d62bc9a669611c3d0c8ed5ea26569b

The right thing to do is to note this in the commit message.

> Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
> ---
>  drivers/mtd/spi-nor/spi-nor.c | 10 +++++++++-
>  include/linux/mtd/spi-nor.h   |  1 +
>  2 files changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index fae1474..c5408ed 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -1834,6 +1834,10 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor)
>  			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>  	{ "is25wp128",  INFO(0x9d7018, 0, 64 * 1024, 256,
>  			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> +	{ "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 1024,
> +			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> +			SPI_NOR_4B_OPCODES)
> +	},
>  
>  	/* Macronix */
>  	{ "mx25l512e",   INFO(0xc22010, 0, 64 * 1024,   1, SECT_4K) },
> @@ -3650,6 +3654,10 @@ static int spi_nor_init_params(struct spi_nor *nor,
>  		case SNOR_MFR_MACRONIX:
>  			params->quad_enable = macronix_quad_enable;
>  			break;
> +		case SNOR_MFR_ISSI:
> +			params->quad_enable = macronix_quad_enable;
> +			break;
> +
>  
>  		case SNOR_MFR_ST:
>  		case SNOR_MFR_MICRON:
> @@ -4127,7 +4135,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
>  	if (ret)
>  		return ret;
>  
> -	if (nor->addr_width) {
> +	if (nor->addr_width && JEDEC_MFR(info) != SNOR_MFR_ISSI) {
>  		/* already configured from SFDP */
>  	} else if (info->addr_width) {
>  		nor->addr_width = info->addr_width;
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index b3d360b..ff13297 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -19,6 +19,7 @@
>  #define SNOR_MFR_ATMEL		CFI_MFR_ATMEL
>  #define SNOR_MFR_GIGADEVICE	0xc8
>  #define SNOR_MFR_INTEL		CFI_MFR_INTEL
> +#define SNOR_MFR_ISSI		0x9d		/* ISSI */
>  #define SNOR_MFR_ST		CFI_MFR_ST	/* ST Micro */
>  #define SNOR_MFR_MICRON		CFI_MFR_MICRON	/* Micron */
>  #define SNOR_MFR_MACRONIX	CFI_MFR_MACRONIX
> -- 
> 1.9.1
> 
> 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/