Re: [PATCH v2 00/22] mtd: spi-nor: Quad Enable and (un)lock methods

[<Tudor.Ambarus@microchip.com>]

Hi, Jonas,

s25fl512s is impacted by this patch set. Would you please do a little test to
see if everything is ok for your flash with these patches applied? I don't have
the flash, so I can't do the tests by myself. There is a possible test method
described below in the cover letter.

You can find the patches at
https://patchwork.ozlabs.org/project/linux-mtd/list/?series=132270 or at
https://github.com/ambarus/linux-0day, branch spi-nor/quad-enable-rework-v2.

Thank you,
ta

On 09/24/2019 10:45 AM, Tudor Ambarus - M18064 wrote:
> From: Tudor Ambarus <tudor.ambarus@microchip.com>
> 
> Patches 1 - 14 are just clean up patches for the Flash Register
> Operations.
> 
> Patches 15 - 22 deal with the Quad Enable and the (un)lock methods.
> Fixed the clearing of QE bit on (un)lock() operations. Reworked the
> Quad Enable methods and the disabling of the block write protection
> at power-up.
> 
> Again, this is just compile tested, I don't have (yet) a relevant
> spansion-like flash memory to test the (un)lock() methods, so I'll need
> your help for testing this patch set.
> 
> The patch set can be tested using mtd-utils:
> 1/ do a read-erase-write-read-back test immediately after boot, to check
> the spi_nor_unlock_all() method. The focus is on the erase/write
> methods, we want to see if the flash is unlocked at power-up.
>         mtd_debug read /dev/mtd-yours offset size read-file
>         hexdump read-file
>         mtd_debug erase /dev/mtd-yours offset size
>         dd if=/dev/urandom of=write-file bs=please-choose count=please-choose
>         mtd_debug write /dev/mtd-yours offset write-file-size write-file
>         mtd_debug read /dev/mtd-yours offset write-file-size read-file
>         sha1sum read-file write-file
> 2/ lock flash then try to erase/write it, to see if the lock works
>         flash_lock /dev/mtd-yours offset block-count
>         Do the read-erase-write-read-back test from 1/. The contents of
>         flash should not change in the erase and write steps.
> 3/ unlock flash and do the read-erase-write-read-back from 1/. The value of the
>    QEE should not change and you should be able to erase and write the flash.
>    Test 1/ should be successful.
> 
> v2:
> - Introduce spi_nor_write_16bit_cr_and_check() as per Vignesh's suggestion. The
>   Configuration Register contains bits that can be updated in future: FREEZE,
>   CMP. Provide a generic method that allows updating all bits of the
>   Configuration Register.
> - Fix SNOR_F_NO_READ_CR case in
>   "mtd: spi-nor: Rework the disabling of block write protection". When the flash
>   doesn't support the CR Read command, we make an assumption about the value of
>   the QE bit. In spi_nor_init(), call spi_nor_quad_enable() first, then
>   spi_nor_unlock_all(), so that at the spi_nor_unlock_all() time we can be sure
>   the QE bit has value one, because of the previous call to spi_nor_quad_enable().
> - Fix if statement in spi_nor_write_sr_and_check():
>   if (nor->flags & SNOR_F_HAS_16BIT_SR)
> - Fix documentation warnings.
> - New patch: "mtd: spi-nor: Check all the bits written, not just the BP ones".
> - Drop Global Unlock patches, will send them in a different patch set.
> 
> Tudor Ambarus (22):
>   mtd: spi-nor: hisi-sfc: Drop nor->erase NULL assignment
>   mtd: spi-nor: Introduce 'struct spi_nor_controller_ops'
>   mtd: spi-nor: cadence-quadspi: Fix cqspi_command_read() definition
>   mtd: spi-nor: Rename nor->params to nor->flash
>   mtd: spi-nor: Rework read_sr()
>   mtd: spi-nor: Rework read_fsr()
>   mtd: spi-nor: Rework read_cr()
>   mtd: spi-nor: Rework write_enable/disable()
>   mtd: spi-nor: Fix retlen handling in sst_write()
>   mtd: spi-nor: Rework write_sr()
>   mtd: spi-nor: Rework spi_nor_read/write_sr2()
>   mtd: spi-nor: Report error in spi_nor_xread_sr()
>   mtd: spi-nor: Void return type for spi_nor_clear_sr/fsr()
>   mtd: spi-nor: Drop duplicated new line
>   mtd: spi-nor: Drop spansion_quad_enable()
>   mtd: spi-nor: Fix errno on quad_enable methods
>   mtd: spi-nor: Check all the bits written, not just the BP ones
>   mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()
>   mtd: spi-nor: Rework macronix_quad_enable()
>   mtd: spi-nor: Rework spansion(_no)_read_cr_quad_enable()
>   mtd: spi-nor: Update sr2_bit7_quad_enable()
>   mtd: spi-nor: Rework the disabling of block write protection
> 
>  drivers/mtd/spi-nor/aspeed-smc.c      |   23 +-
>  drivers/mtd/spi-nor/cadence-quadspi.c |   54 +-
>  drivers/mtd/spi-nor/hisi-sfc.c        |   23 +-
>  drivers/mtd/spi-nor/intel-spi.c       |   24 +-
>  drivers/mtd/spi-nor/mtk-quadspi.c     |   25 +-
>  drivers/mtd/spi-nor/nxp-spifi.c       |   23 +-
>  drivers/mtd/spi-nor/spi-nor.c         | 1716 ++++++++++++++++++---------------
>  include/linux/mtd/spi-nor.h           |   74 +-
>  8 files changed, 1058 insertions(+), 904 deletions(-)
> 
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/