linux-next: Tree for Oct 24

linux-next: Tree for Oct 24

[Thierry Reding]

Hi all,

I've uploaded today's linux-next tree to the master branch of the
repository below:

        git://gitorious.org/thierryreding/linux-next.git

A next-20131024 tag is also provided for convenience.

Quite a few new conflicts. Some of them non-trivial. I've fixed another
set of build failures, so 32-bit and 64-bit allmodconfigs build fine on
x86. ARM and x86 default configurations also build fine. PowerPC is in
pretty bad shape, mostly due to some OF header rework going on.

I'm somewhat short on time today, so I probably won't manage to send out
detailed conflict reports out today. I'll try to do that tomorrow,
though.

Thierry

Re: linux-next: Tree for Oct 24 (xilinx_uartps)

[Randy Dunlap]

[-- Attachment #1: Type: text/plain, Size: 1840 bytes --]

On 10/24/13 09:31, Thierry Reding wrote:
> Hi all,
> 
> I've uploaded today's linux-next tree to the master branch of the
> repository below:
> 
>         git://gitorious.org/thierryreding/linux-next.git
> 
> A next-20131024 tag is also provided for convenience.
> 
> Quite a few new conflicts. Some of them non-trivial. I've fixed another
> set of build failures, so 32-bit and 64-bit allmodconfigs build fine on
> x86. ARM and x86 default configurations also build fine. PowerPC is in
> pretty bad shape, mostly due to some OF header rework going on.
> 
> I'm somewhat short on time today, so I probably won't manage to send out
> detailed conflict reports out today. I'll try to do that tomorrow,
> though.

on i386:

drivers/tty/serial/xilinx_uartps.c: In function 'xuartps_clk_notifier_cb':
drivers/tty/serial/xilinx_uartps.c:436:7: error: 'PRE_RATE_CHANGE' undeclared (first use in this function)
drivers/tty/serial/xilinx_uartps.c:436:7: note: each undeclared identifier is reported only once for each function it appears in
drivers/tty/serial/xilinx_uartps.c:446:36: error: dereferencing pointer to incomplete type
drivers/tty/serial/xilinx_uartps.c:461:7: error: 'POST_RATE_CHANGE' undeclared (first use in this function)
drivers/tty/serial/xilinx_uartps.c:470:24: error: dereferencing pointer to incomplete type
drivers/tty/serial/xilinx_uartps.c:475:7: error: 'ABORT_RATE_CHANGE' undeclared (first use in this function)
drivers/tty/serial/xilinx_uartps.c: In function 'xuartps_probe':
drivers/tty/serial/xilinx_uartps.c:1385:2: error: implicit declaration of function 'clk_notifier_register' [-Werror=implicit-function-declaration]
drivers/tty/serial/xilinx_uartps.c:1418:2: error: implicit declaration of function 'clk_notifier_unregister' [-Werror=implicit-function-declaration]


Full randconfig file is attached.

-- 
~Randy

[-- Attachment #2: config-r4973 --]
[-- Type: text/plain, Size: 58081 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.12.0-rc6 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_ZONE_DMA32 is not set
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_FHANDLE is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_AUDIT_LOGINUID_IMMUTABLE=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_STALL_COMMON is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_RESOURCE_COUNTERS=y
CONFIG_MEMCG=y
# CONFIG_MEMCG_KMEM is not set
# CONFIG_CGROUP_HUGETLB is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
# CONFIG_NET_NS is not set
CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_PROFILING=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_JUMP_LABEL=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_SYSTEM_TRUSTED_KEYRING=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_CMDLINE_PARSER=y

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_AMIGA_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
# CONFIG_SMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_WANT_INTEL_MID is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
# CONFIG_PARAVIRT is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
CONFIG_M486=y
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=4
CONFIG_X86_L1_CACHE_SHIFT=4
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_F00F_BUG=y
CONFIG_X86_INVD_BUG=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_HPET_TIMER is not set
CONFIG_DMI=y
CONFIG_NR_CPUS=1
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
CONFIG_I8K=y
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_X86_PAE is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_BOUNCE is not set
CONFIG_NEED_BOUNCE_POOL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
CONFIG_CMA=y
# CONFIG_ZBUD is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_SFI=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_ALLOW_INTS=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set

#
# Bus options (PCI etc.)
#
# CONFIG_PCI is not set
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_SCx200 is not set
CONFIG_OLPC=y
CONFIG_ALIX=y
CONFIG_NET5501=y
CONFIG_GEOS=y
# CONFIG_PCCARD is not set
CONFIG_X86_SYSFB=y

#
# Executable file formats / Emulations
#
# CONFIG_BINFMT_ELF is not set
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
# CONFIG_NET_IPGRE is not set
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_INET_AH=y
# CONFIG_INET_ESP is not set
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
# CONFIG_INET6_ESP is not set
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_GRE=y
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
# CONFIG_IPV6_PIMSM_V2 is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
# CONFIG_NETFILTER is not set
CONFIG_IP_DCCP=y

#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
# CONFIG_ATM_LANE is not set
CONFIG_ATM_BR2684=y
# CONFIG_ATM_BR2684_IPFILTER is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_IPX=y
CONFIG_IPX_INTERN=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
# CONFIG_IPDDP_ENCAP is not set
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_PHONET=y
CONFIG_IEEE802154=y
CONFIG_IEEE802154_6LOWPAN=y
CONFIG_MAC802154=y
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=y
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
# CONFIG_NET_SCH_RED is not set
CONFIG_NET_SCH_SFB=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
# CONFIG_NET_SCH_GRED is not set
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=y
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_PLUG is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
# CONFIG_NET_CLS_TCINDEX is not set
CONFIG_NET_CLS_ROUTE4=y
# CONFIG_NET_CLS_FW is not set
CONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
# CONFIG_NET_CLS_RSVP is not set
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_BLA=y
# CONFIG_BATMAN_ADV_DAT is not set
CONFIG_BATMAN_ADV_NC=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_OPENVSWITCH=y
CONFIG_OPENVSWITCH_GRE=y
CONFIG_VSOCKETS=y
CONFIG_NETLINK_MMAP=y
# CONFIG_NETLINK_DIAG is not set
CONFIG_NET_MPLS_GSO=y
CONFIG_NETPRIO_CGROUP=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
# CONFIG_CFG80211_WEXT is not set
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_MESSAGE_TRACING=y
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_REGULATOR is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=y
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=y
CONFIG_NFC_DIGITAL=y
# CONFIG_NFC_NCI is not set
CONFIG_NFC_HCI=y
CONFIG_NFC_SHDLC=y

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_SIM=y
CONFIG_NFC_PN544=y
CONFIG_NFC_PN544_I2C=y
CONFIG_NFC_MICROREAD=y
CONFIG_NFC_MICROREAD_I2C=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_CMA is not set

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_OF=y

#
# Device Tree and Open Firmware support
#
CONFIG_PROC_DEVICETREE=y
CONFIG_OF_SELFTEST=y
CONFIG_OF_PROMTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
# CONFIG_PARPORT is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_BLK_DEV is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=y
CONFIG_DUMMY_IRQ=y
CONFIG_ICS932S401=y
CONFIG_ATMEL_SSC=y
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1780 is not set
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
# CONFIG_DS1682 is not set
CONFIG_TI_DAC7512=y
CONFIG_VMWARE_BALLOON=y
CONFIG_BMP085=y
CONFIG_BMP085_I2C=y
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
CONFIG_LATTICE_ECP3_CONFIG=y
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
CONFIG_SENSORS_LIS3_SPI=y
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=y

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
CONFIG_ISCSI_BOOT_SYSFS=y
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFSHCD_PLATFORM=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_DH is not set
CONFIG_SCSI_OSD_INITIATOR=y
# CONFIG_SCSI_OSD_ULD is not set
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_SATA_HIGHBANK=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_RCAR is not set

#
# PATA SFF controllers with BMDMA
#

#
# PIO-only SFF controllers
#

#
# Generic fallback / legacy drivers
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
CONFIG_MD_LINEAR=y
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_MULTIPATH=y
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
CONFIG_DM_MIRROR=y
CONFIG_DM_RAID=y
CONFIG_DM_LOG_USERSPACE=y
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
CONFIG_DM_DELAY=y
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
CONFIG_DM_SWITCH=y
# CONFIG_TARGET_CORE is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_NETDEVICES is not set
CONFIG_VHOST_NET=y
CONFIG_VHOST_RING=y
CONFIG_VHOST=y

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5520=y
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_LM8323=y
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_STMPE is not set
CONFIG_KEYBOARD_TC3589X=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=y
CONFIG_MOUSE_SYNAPTICS_I2C=y
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879_SPI=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_TOUCHSCREEN_CY8CTMG110=y
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP4_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP4_SPI=y
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_EGALAX=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_ILI210X=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
# CONFIG_TOUCHSCREEN_PIXCIR is not set
CONFIG_TOUCHSCREEN_WM831X=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_TOUCHSCREEN_PCAP=y
CONFIG_TOUCHSCREEN_ST1232=y
# CONFIG_TOUCHSCREEN_STMPE is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
CONFIG_SERIO_OLPC_APSP=y
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_ROUTER is not set
CONFIG_TRACE_SINK=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
CONFIG_SERIAL_8250_DW=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=y
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_SCCNXP=y
# CONFIG_SERIAL_SCCNXP_CONSOLE is not set
CONFIG_SERIAL_TIMBERDALE=y
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
CONFIG_SERIAL_IFX6X60=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_MWAVE is not set
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
CONFIG_TCG_ST33_I2C=y
# CONFIG_TELCLOCK is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_GPIO=y
CONFIG_I2C_KEMPLD=y
CONFIG_I2C_OCORES=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_TAOS_EVM is not set

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_FSL_LIB=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_OC_TINY=y
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_SC18IS602 is not set
CONFIG_SPI_XCOMM=y
# CONFIG_SPI_XILINX is not set
CONFIG_SPI_DESIGNWARE=y

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
CONFIG_SPI_TLE62X0=y
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI clients
#
CONFIG_HSI_CHAR=y

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
# CONFIG_NTP_PPS is not set

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_IT8761E is not set
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_TS5500=y
# CONFIG_GPIO_GRGPIO is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_ARIZONA is not set
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_SX150X=y
CONFIG_GPIO_STMPE=y
# CONFIG_GPIO_TC3589X is not set
# CONFIG_GPIO_TPS65912 is not set
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
CONFIG_GPIO_WM8994=y
CONFIG_GPIO_ADP5520=y
# CONFIG_GPIO_ADP5588 is not set
CONFIG_GPIO_ADNP=y

#
# PCI GPIO expanders:
#

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
# CONFIG_GPIO_MCP23S08 is not set
CONFIG_GPIO_MC33880=y
CONFIG_GPIO_74X164=y

#
# AC97 GPIO expanders:
#

#
# LPC GPIO expanders:
#
CONFIG_GPIO_KEMPLD=y

#
# MODULbus GPIO expanders:
#
CONFIG_GPIO_TPS6586X=y
# CONFIG_GPIO_BCM_KONA is not set

#
# USB GPIO expanders:
#
CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_DS1WM=y
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2423=y
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
# CONFIG_WM831X_POWER is not set
CONFIG_WM8350_POWER=y
CONFIG_TEST_POWER=y
# CONFIG_BATTERY_88PM860X is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_DS2780=y
# CONFIG_BATTERY_DS2781 is not set
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_OLPC=y
CONFIG_BATTERY_SBS=y
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_DA9052=y
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_CHARGER_PCF50633=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_LP8727=y
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_MAX8997=y
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
# CONFIG_CHARGER_SMB347 is not set
CONFIG_CHARGER_TPS65090=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=y
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_ADM1021=y
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7310=y
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS620=y
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
CONFIG_SENSORS_GL518SM=y
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_GPIO_FAN=y
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_HTU21=y
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM73=y
# CONFIG_SENSORS_LM75 is not set
CONFIG_SENSORS_LM77=y
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
# CONFIG_SENSORS_LM95245 is not set
CONFIG_SENSORS_MAX1111=y
CONFIG_SENSORS_MAX16065=y
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_SCH56XX_COMMON is not set
CONFIG_SENSORS_ADS1015=y
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_INA209=y
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=y
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_EMULATION=y
CONFIG_INTEL_POWERCLAMP=y

#
# Texas Instruments thermal drivers
#
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
CONFIG_PMIC_ADP5520=y
# CONFIG_MFD_AAT2870_CORE is not set
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_I2C=y
CONFIG_MFD_CROS_EC_SPI=y
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
# CONFIG_MFD_DA9052_SPI is not set
CONFIG_MFD_DA9052_I2C=y
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
CONFIG_MFD_KEMPLD=y
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
CONFIG_EZX_PCAP=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
# CONFIG_PCF50633_GPIO is not set
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SMSC is not set
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
# CONFIG_AB3100_OTP is not set
CONFIG_MFD_STMPE=y

#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
# CONFIG_STMPE_SPI is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=y
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS6586X=y
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=y
# CONFIG_MFD_TPS65912_I2C is not set
CONFIG_MFD_TPS65912_SPI=y
CONFIG_MFD_TPS80031=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
# CONFIG_MFD_WM8997 is not set
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PM8607=y
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AB3100=y
CONFIG_REGULATOR_DA9052=y
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
# CONFIG_REGULATOR_LP872X is not set
CONFIG_REGULATOR_LP8755=y
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=y
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX8997=y
# CONFIG_REGULATOR_PCAP is not set
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PFUZE100=y
# CONFIG_REGULATOR_S2MPS11 is not set
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS51632=y
# CONFIG_REGULATOR_TPS6105X is not set
CONFIG_REGULATOR_TPS62360=y
# CONFIG_REGULATOR_TPS65023 is not set
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS6586X=y
# CONFIG_REGULATOR_TPS65912 is not set
CONFIG_REGULATOR_TPS80031=y
# CONFIG_REGULATOR_WM831X is not set
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8994=y
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_DRM=y
CONFIG_DRM_PANEL=y
CONFIG_DRM_PANEL_SIMPLE=y
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_HDMI=y
# CONFIG_FB is not set
CONFIG_EXYNOS_VIDEO=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=y
CONFIG_SOUND_OSS=y
# CONFIG_SOUND_TRACEINIT is not set
CONFIG_SOUND_DMAP=y
CONFIG_SOUND_VMIDI=y
CONFIG_SOUND_TRIX=y
CONFIG_SOUND_MSS=y
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not set
CONFIG_SOUND_SB=y
CONFIG_SOUND_YM3812=y
# CONFIG_SOUND_UART6850 is not set
CONFIG_SOUND_AEDSP16=y
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
# CONFIG_SOUND_KAHLUA is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
# CONFIG_HID_GENERIC is not set

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELECOM=y
CONFIG_HID_EZKEY=y
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
CONFIG_HID_GYRATION=y
CONFIG_HID_ICADE=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LENOVO_TPKBD=y
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_DJ is not set
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_LOGIG940_FF=y
# CONFIG_LOGIWHEELS_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_ORTEK=y
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
CONFIG_HID_PICOLCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PRIMAX=y
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SPEEDLINK=y
# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=y
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y

#
# I2C HID support
#
CONFIG_I2C_HID=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
CONFIG_MMC_CLKGATE=y

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=y

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_SPI=y
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3533 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_CLEVO_MAIL=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_PCA9685=y
CONFIG_LEDS_WM831X_STATUS=y
# CONFIG_LEDS_WM8350 is not set
CONFIG_LEDS_DA9052=y
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_LT3593=y
# CONFIG_LEDS_ADP5520 is not set
CONFIG_LEDS_TCA6507=y
# CONFIG_LEDS_MAX8997 is not set
CONFIG_LEDS_LM355x=y
CONFIG_LEDS_OT200=y
# CONFIG_LEDS_BLINKM is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
CONFIG_AUXDISPLAY=y
CONFIG_UIO=y
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y
CONFIG_OF_IOMMU=y

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_STE_MODEM_RPROC=y

#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_OF_EXTCON=y
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_MAX8997=y
CONFIG_MEMORY=y
# CONFIG_IIO is not set
# CONFIG_PWM is not set
CONFIG_IRQCHIP=y
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
CONFIG_FMC=y
CONFIG_FMC_FAKEDEV=y
# CONFIG_FMC_TRIVIAL is not set
CONFIG_FMC_WRITE_EEPROM=y
CONFIG_FMC_CHARDEV=y
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL=y

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
# CONFIG_BTRFS_DEBUG is not set
CONFIG_BTRFS_ASSERT=y
CONFIG_NILFS2_FS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y

#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
CONFIG_FSCACHE_DEBUG=y
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=y
CONFIG_CACHEFILES_DEBUG=y
CONFIG_CACHEFILES_HISTOGRAM=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=y
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=y
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
CONFIG_HFSPLUS_FS_POSIX_ACL=y
CONFIG_BEFS_FS=y
CONFIG_BEFS_DEBUG=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_LOGFS=y
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_XATTR is not set
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZO=y
# CONFIG_SQUASHFS_XZ is not set
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
# CONFIG_MINIX_FS is not set
CONFIG_OMFS_FS=y
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
CONFIG_QNX6FS_FS=y
# CONFIG_QNX6FS_DEBUG is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
CONFIG_PSTORE_RAM=y
CONFIG_SYSV_FS=y
# CONFIG_UFS_FS is not set
CONFIG_F2FS_FS=y
CONFIG_F2FS_FS_XATTR=y
# CONFIG_F2FS_FS_POSIX_ACL is not set
# CONFIG_F2FS_FS_SECURITY is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SMB2 is not set
# CONFIG_CIFS_FSCACHE is not set
CONFIG_NCP_FS=y
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
# CONFIG_9P_FSCACHE is not set
# CONFIG_9P_FS_POSIX_ACL is not set
CONFIG_9P_FS_SECURITY=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4

#
# Compile-time checks and compiler options
#
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set

#
# Memory Debugging
#
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y

#
# Debug Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_BUGVERBOSE=y

#
# RCU Debugging
#
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set

#
# Runtime Testing
#
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_ASYNC_RAID6_TEST=y
CONFIG_TEST_STRING_HELPERS=y
# CONFIG_TEST_KSTRTOX is not set
CONFIG_DMA_API_DEBUG=y
CONFIG_SAMPLES=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_DOUBLEFAULT=y
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
# CONFIG_SECURITY_SELINUX_AVC_STATS is not set
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX=y
CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX_VALUE=19
# CONFIG_SECURITY_SMACK is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
# CONFIG_SECURITY_APPARMOR_HASH is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
# CONFIG_INTEGRITY_AUDIT is not set
# CONFIG_IMA is not set
CONFIG_EVM=y
CONFIG_EVM_HMAC_VERSION=2
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
CONFIG_DEFAULT_SECURITY_TOMOYO=y
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="tomoyo"
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_LZ4 is not set
CONFIG_CRYPTO_LZ4HC=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API=y
# CONFIG_CRYPTO_USER_API_HASH is not set
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_LGUEST=y
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_BIT=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_BTREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y

Re: linux-next: Tree for Oct 24

[Guenter Roeck]

On 10/24/2013 09:31 AM, Thierry Reding wrote:
> Hi all,
>
> I've uploaded today's linux-next tree to the master branch of the
> repository below:
>
>          git://gitorious.org/thierryreding/linux-next.git
>
> A next-20131024 tag is also provided for convenience.
>
> Quite a few new conflicts. Some of them non-trivial. I've fixed another
> set of build failures, so 32-bit and 64-bit allmodconfigs build fine on
> x86. ARM and x86 default configurations also build fine. PowerPC is in
> pretty bad shape, mostly due to some OF header rework going on.
>

Hmm ... I see

Building arm:defconfig ... failed
--------------
Error log:
drivers/built-in.o: In function `mmc_gpio_request_cd':
clkdev.c:(.text+0x74cf8): undefined reference to `devm_gpio_request_one'
make: *** [vmlinux] Error 1

Otherwise pretty much the same as yesterday, with a build log of
	total: 110 pass: 88 skipped: 4 fail: 18

This is with "v3.12-rc5-7941-g765f88c".

Guenter

Re: linux-next: Tree for Oct 24

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1365 bytes --]

On Thu, Oct 24, 2013 at 10:02:22PM -0700, Guenter Roeck wrote:
> On 10/24/2013 09:31 AM, Thierry Reding wrote:
> >Hi all,
> >
> >I've uploaded today's linux-next tree to the master branch of the
> >repository below:
> >
> >         git://gitorious.org/thierryreding/linux-next.git
> >
> >A next-20131024 tag is also provided for convenience.
> >
> >Quite a few new conflicts. Some of them non-trivial. I've fixed another
> >set of build failures, so 32-bit and 64-bit allmodconfigs build fine on
> >x86. ARM and x86 default configurations also build fine. PowerPC is in
> >pretty bad shape, mostly due to some OF header rework going on.
> >
> 
> Hmm ... I see
> 
> Building arm:defconfig ... failed
> --------------
> Error log:
> drivers/built-in.o: In function `mmc_gpio_request_cd':
> clkdev.c:(.text+0x74cf8): undefined reference to `devm_gpio_request_one'
> make: *** [vmlinux] Error 1
> 
> Otherwise pretty much the same as yesterday, with a build log of
> 	total: 110 pass: 88 skipped: 4 fail: 18
> 
> This is with "v3.12-rc5-7941-g765f88c".

Yeah, I saw the devm_gpio_request_one() errors too. They happened for 3
boards on ARM I think. Must have forgotten to update the summary email.
I'll see if I can come up with a patch to fix the GPIO related build
failures, or at least report it to LinusW or Alexandre.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]

Re: linux-next: Tree for Oct 24

[Olof Johansson]

On Fri, Oct 25, 2013 at 1:35 AM, Thierry Reding
<thierry.reding@gmail.com> wrote:
> On Thu, Oct 24, 2013 at 10:02:22PM -0700, Guenter Roeck wrote:
>> On 10/24/2013 09:31 AM, Thierry Reding wrote:
>> >Hi all,
>> >
>> >I've uploaded today's linux-next tree to the master branch of the
>> >repository below:
>> >
>> >         git://gitorious.org/thierryreding/linux-next.git
>> >
>> >A next-20131024 tag is also provided for convenience.
>> >
>> >Quite a few new conflicts. Some of them non-trivial. I've fixed another
>> >set of build failures, so 32-bit and 64-bit allmodconfigs build fine on
>> >x86. ARM and x86 default configurations also build fine. PowerPC is in
>> >pretty bad shape, mostly due to some OF header rework going on.
>> >
>>
>> Hmm ... I see
>>
>> Building arm:defconfig ... failed
>> --------------
>> Error log:
>> drivers/built-in.o: In function `mmc_gpio_request_cd':
>> clkdev.c:(.text+0x74cf8): undefined reference to `devm_gpio_request_one'
>> make: *** [vmlinux] Error 1
>>
>> Otherwise pretty much the same as yesterday, with a build log of
>>       total: 110 pass: 88 skipped: 4 fail: 18
>>
>> This is with "v3.12-rc5-7941-g765f88c".
>
> Yeah, I saw the devm_gpio_request_one() errors too. They happened for 3
> boards on ARM I think. Must have forgotten to update the summary email.
> I'll see if I can come up with a patch to fix the GPIO related build
> failures, or at least report it to LinusW or Alexandre.

Hmm.

Please don't apply fixes like these directly to your tree, keep the
broken parts (or drop the tree that introduced it). It makes the
process of getting the fixes in where they really have to go much more
error prone, since there's no way to track whether they have landed in
the right place yet or not.


-Olof

Re: linux-next: Tree for Oct 24

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 1014 bytes --]

On Fri, Oct 25, 2013 at 06:16:02AM -0700, Olof Johansson wrote:
> On Fri, Oct 25, 2013 at 1:35 AM, Thierry Reding

> > Yeah, I saw the devm_gpio_request_one() errors too. They happened for 3
> > boards on ARM I think. Must have forgotten to update the summary email.
> > I'll see if I can come up with a patch to fix the GPIO related build
> > failures, or at least report it to LinusW or Alexandre.

> Hmm.

> Please don't apply fixes like these directly to your tree, keep the
> broken parts (or drop the tree that introduced it). It makes the
> process of getting the fixes in where they really have to go much more
> error prone, since there's no way to track whether they have landed in
> the right place yet or not.

The rule I was applying (which I think is the same as Stephen applies)
is that I'd fix anything that was definitely the result of a merge issue
(like the build failure in misc due to a sysfs API change in the sysfs
tree) but not anything that was just plain broken in the tree in
isolation.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: linux-next: Tree for Oct 24

[Olof Johansson]

On Fri, Oct 25, 2013 at 6:24 AM, Mark Brown <broonie@kernel.org> wrote:
> On Fri, Oct 25, 2013 at 06:16:02AM -0700, Olof Johansson wrote:
>> On Fri, Oct 25, 2013 at 1:35 AM, Thierry Reding
>
>> > Yeah, I saw the devm_gpio_request_one() errors too. They happened for 3
>> > boards on ARM I think. Must have forgotten to update the summary email.
>> > I'll see if I can come up with a patch to fix the GPIO related build
>> > failures, or at least report it to LinusW or Alexandre.
>
>> Hmm.
>
>> Please don't apply fixes like these directly to your tree, keep the
>> broken parts (or drop the tree that introduced it). It makes the
>> process of getting the fixes in where they really have to go much more
>> error prone, since there's no way to track whether they have landed in
>> the right place yet or not.
>
> The rule I was applying (which I think is the same as Stephen applies)
> is that I'd fix anything that was definitely the result of a merge issue
> (like the build failure in misc due to a sysfs API change in the sysfs
> tree) but not anything that was just plain broken in the tree in
> isolation.

Some of those might still make sense, but as many as possible of them
should be pushed down into the trees where they belong, even if
they're strictly not needed there (as long as they don't break the
standalone tree, of course).


-Olof

Re: linux-next: Tree for Oct 24

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 910 bytes --]

On Fri, Oct 25, 2013 at 06:33:43AM -0700, Olof Johansson wrote:
> On Fri, Oct 25, 2013 at 6:24 AM, Mark Brown <broonie@kernel.org> wrote:

> > The rule I was applying (which I think is the same as Stephen applies)
> > is that I'd fix anything that was definitely the result of a merge issue
> > (like the build failure in misc due to a sysfs API change in the sysfs
> > tree) but not anything that was just plain broken in the tree in
> > isolation.

> Some of those might still make sense, but as many as possible of them
> should be pushed down into the trees where they belong, even if
> they're strictly not needed there (as long as they don't break the
> standalone tree, of course).

Right, this is strictly for issues generated as a result of a change in
one tree that cause an issue when merged with another tree like adding a
user of an API in one tree that has had an incompatible change in
another.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: linux-next: Tree for Oct 24

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 2560 bytes --]

On Fri, Oct 25, 2013 at 06:16:02AM -0700, Olof Johansson wrote:
> On Fri, Oct 25, 2013 at 1:35 AM, Thierry Reding
> <thierry.reding@gmail.com> wrote:
> > On Thu, Oct 24, 2013 at 10:02:22PM -0700, Guenter Roeck wrote:
> >> On 10/24/2013 09:31 AM, Thierry Reding wrote:
> >> >Hi all,
> >> >
> >> >I've uploaded today's linux-next tree to the master branch of the
> >> >repository below:
> >> >
> >> >         git://gitorious.org/thierryreding/linux-next.git
> >> >
> >> >A next-20131024 tag is also provided for convenience.
> >> >
> >> >Quite a few new conflicts. Some of them non-trivial. I've fixed another
> >> >set of build failures, so 32-bit and 64-bit allmodconfigs build fine on
> >> >x86. ARM and x86 default configurations also build fine. PowerPC is in
> >> >pretty bad shape, mostly due to some OF header rework going on.
> >> >
> >>
> >> Hmm ... I see
> >>
> >> Building arm:defconfig ... failed
> >> --------------
> >> Error log:
> >> drivers/built-in.o: In function `mmc_gpio_request_cd':
> >> clkdev.c:(.text+0x74cf8): undefined reference to `devm_gpio_request_one'
> >> make: *** [vmlinux] Error 1
> >>
> >> Otherwise pretty much the same as yesterday, with a build log of
> >>       total: 110 pass: 88 skipped: 4 fail: 18
> >>
> >> This is with "v3.12-rc5-7941-g765f88c".
> >
> > Yeah, I saw the devm_gpio_request_one() errors too. They happened for 3
> > boards on ARM I think. Must have forgotten to update the summary email.
> > I'll see if I can come up with a patch to fix the GPIO related build
> > failures, or at least report it to LinusW or Alexandre.
> 
> Hmm.
> 
> Please don't apply fixes like these directly to your tree, keep the
> broken parts (or drop the tree that introduced it). It makes the
> process of getting the fixes in where they really have to go much more
> error prone, since there's no way to track whether they have landed in
> the right place yet or not.

I've found that fixing one build error often subsequent build failures,
which would go unnoticed if I dropped the trees or let the breakage
unfixed.

Except for very few occasions I've immediately sent out patches to the
respective subsystem maintainers, so they should've gotten picked up.
What's the difference if I do it as part of linux-next to if somebody
does it outside? At least this way they are part of the linux-next tree
so if I create the next one and cherry-pick the patches and they still
apply I can be reasonably sure that they haven't landed in the right
place yet.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]

Re: linux-next: Tree for Oct 24

[Olof Johansson]

On Fri, Oct 25, 2013 at 6:35 AM, Thierry Reding
<thierry.reding@gmail.com> wrote:
> On Fri, Oct 25, 2013 at 06:16:02AM -0700, Olof Johansson wrote:
>> On Fri, Oct 25, 2013 at 1:35 AM, Thierry Reding
>> <thierry.reding@gmail.com> wrote:
>> > On Thu, Oct 24, 2013 at 10:02:22PM -0700, Guenter Roeck wrote:
>> >> On 10/24/2013 09:31 AM, Thierry Reding wrote:
>> >> >Hi all,
>> >> >
>> >> >I've uploaded today's linux-next tree to the master branch of the
>> >> >repository below:
>> >> >
>> >> >         git://gitorious.org/thierryreding/linux-next.git
>> >> >
>> >> >A next-20131024 tag is also provided for convenience.
>> >> >
>> >> >Quite a few new conflicts. Some of them non-trivial. I've fixed another
>> >> >set of build failures, so 32-bit and 64-bit allmodconfigs build fine on
>> >> >x86. ARM and x86 default configurations also build fine. PowerPC is in
>> >> >pretty bad shape, mostly due to some OF header rework going on.
>> >> >
>> >>
>> >> Hmm ... I see
>> >>
>> >> Building arm:defconfig ... failed
>> >> --------------
>> >> Error log:
>> >> drivers/built-in.o: In function `mmc_gpio_request_cd':
>> >> clkdev.c:(.text+0x74cf8): undefined reference to `devm_gpio_request_one'
>> >> make: *** [vmlinux] Error 1
>> >>
>> >> Otherwise pretty much the same as yesterday, with a build log of
>> >>       total: 110 pass: 88 skipped: 4 fail: 18
>> >>
>> >> This is with "v3.12-rc5-7941-g765f88c".
>> >
>> > Yeah, I saw the devm_gpio_request_one() errors too. They happened for 3
>> > boards on ARM I think. Must have forgotten to update the summary email.
>> > I'll see if I can come up with a patch to fix the GPIO related build
>> > failures, or at least report it to LinusW or Alexandre.
>>
>> Hmm.
>>
>> Please don't apply fixes like these directly to your tree, keep the
>> broken parts (or drop the tree that introduced it). It makes the
>> process of getting the fixes in where they really have to go much more
>> error prone, since there's no way to track whether they have landed in
>> the right place yet or not.
>
> I've found that fixing one build error often subsequent build failures,
> which would go unnoticed if I dropped the trees or let the breakage
> unfixed.

Yeah, that's what happened with the GPIO subsystem on this release --
there are two build errors but your fix resolves one of them such at
the other one is exposed. It makes it confusing to bisect down to root
cause. I'd almost rather have your tree just being broken, but patches
submitted and sent in to the maintainer in question if you want to get
it fixed ASAP.

In particular, the gpio fix in the tree right now has no description, etc.


-Olof

Re: linux-next: Tree for Oct 24

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 3308 bytes --]

On Fri, Oct 25, 2013 at 06:43:53AM -0700, Olof Johansson wrote:
> On Fri, Oct 25, 2013 at 6:35 AM, Thierry Reding
> <thierry.reding@gmail.com> wrote:
> > On Fri, Oct 25, 2013 at 06:16:02AM -0700, Olof Johansson wrote:
> >> On Fri, Oct 25, 2013 at 1:35 AM, Thierry Reding
> >> <thierry.reding@gmail.com> wrote:
> >> > On Thu, Oct 24, 2013 at 10:02:22PM -0700, Guenter Roeck wrote:
> >> >> On 10/24/2013 09:31 AM, Thierry Reding wrote:
> >> >> >Hi all,
> >> >> >
> >> >> >I've uploaded today's linux-next tree to the master branch of the
> >> >> >repository below:
> >> >> >
> >> >> >         git://gitorious.org/thierryreding/linux-next.git
> >> >> >
> >> >> >A next-20131024 tag is also provided for convenience.
> >> >> >
> >> >> >Quite a few new conflicts. Some of them non-trivial. I've fixed another
> >> >> >set of build failures, so 32-bit and 64-bit allmodconfigs build fine on
> >> >> >x86. ARM and x86 default configurations also build fine. PowerPC is in
> >> >> >pretty bad shape, mostly due to some OF header rework going on.
> >> >> >
> >> >>
> >> >> Hmm ... I see
> >> >>
> >> >> Building arm:defconfig ... failed
> >> >> --------------
> >> >> Error log:
> >> >> drivers/built-in.o: In function `mmc_gpio_request_cd':
> >> >> clkdev.c:(.text+0x74cf8): undefined reference to `devm_gpio_request_one'
> >> >> make: *** [vmlinux] Error 1
> >> >>
> >> >> Otherwise pretty much the same as yesterday, with a build log of
> >> >>       total: 110 pass: 88 skipped: 4 fail: 18
> >> >>
> >> >> This is with "v3.12-rc5-7941-g765f88c".
> >> >
> >> > Yeah, I saw the devm_gpio_request_one() errors too. They happened for 3
> >> > boards on ARM I think. Must have forgotten to update the summary email.
> >> > I'll see if I can come up with a patch to fix the GPIO related build
> >> > failures, or at least report it to LinusW or Alexandre.
> >>
> >> Hmm.
> >>
> >> Please don't apply fixes like these directly to your tree, keep the
> >> broken parts (or drop the tree that introduced it). It makes the
> >> process of getting the fixes in where they really have to go much more
> >> error prone, since there's no way to track whether they have landed in
> >> the right place yet or not.
> >
> > I've found that fixing one build error often subsequent build failures,
> > which would go unnoticed if I dropped the trees or let the breakage
> > unfixed.
> 
> Yeah, that's what happened with the GPIO subsystem on this release --
> there are two build errors but your fix resolves one of them such at
> the other one is exposed. It makes it confusing to bisect down to root
> cause. I'd almost rather have your tree just being broken, but patches
> submitted and sent in to the maintainer in question if you want to get
> it fixed ASAP.

I guess I could probably just push the final merge commit as a tree, but
it would require me to very strongly resist my compulsive urge not to
push something that doesn't even build.

I suppose if we could write that down into some kind of rule I could go
look at it until the compulsiveness wears down... =)

> In particular, the gpio fix in the tree right now has no description, etc.

Yes, I know. FWIW I fixed that up properly in today's tree, which I'm
almost ready to push out.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]

Re: linux-next: Tree for Oct 24

[Guenter Roeck]

On Fri, Oct 25, 2013 at 04:17:08PM +0200, Thierry Reding wrote:
> On Fri, Oct 25, 2013 at 06:43:53AM -0700, Olof Johansson wrote:
> > On Fri, Oct 25, 2013 at 6:35 AM, Thierry Reding
> > <thierry.reding@gmail.com> wrote:
> > > On Fri, Oct 25, 2013 at 06:16:02AM -0700, Olof Johansson wrote:
> > >> On Fri, Oct 25, 2013 at 1:35 AM, Thierry Reding
> > >> <thierry.reding@gmail.com> wrote:
> > >> > On Thu, Oct 24, 2013 at 10:02:22PM -0700, Guenter Roeck wrote:
> > >> >> On 10/24/2013 09:31 AM, Thierry Reding wrote:
> > >> >> >Hi all,
> > >> >> >
> > >> >> >I've uploaded today's linux-next tree to the master branch of the
> > >> >> >repository below:
> > >> >> >
> > >> >> >         git://gitorious.org/thierryreding/linux-next.git
> > >> >> >
> > >> >> >A next-20131024 tag is also provided for convenience.
> > >> >> >
> > >> >> >Quite a few new conflicts. Some of them non-trivial. I've fixed another
> > >> >> >set of build failures, so 32-bit and 64-bit allmodconfigs build fine on
> > >> >> >x86. ARM and x86 default configurations also build fine. PowerPC is in
> > >> >> >pretty bad shape, mostly due to some OF header rework going on.
> > >> >> >
> > >> >>
> > >> >> Hmm ... I see
> > >> >>
> > >> >> Building arm:defconfig ... failed
> > >> >> --------------
> > >> >> Error log:
> > >> >> drivers/built-in.o: In function `mmc_gpio_request_cd':
> > >> >> clkdev.c:(.text+0x74cf8): undefined reference to `devm_gpio_request_one'
> > >> >> make: *** [vmlinux] Error 1
> > >> >>
> > >> >> Otherwise pretty much the same as yesterday, with a build log of
> > >> >>       total: 110 pass: 88 skipped: 4 fail: 18
> > >> >>
> > >> >> This is with "v3.12-rc5-7941-g765f88c".
> > >> >
> > >> > Yeah, I saw the devm_gpio_request_one() errors too. They happened for 3
> > >> > boards on ARM I think. Must have forgotten to update the summary email.
> > >> > I'll see if I can come up with a patch to fix the GPIO related build
> > >> > failures, or at least report it to LinusW or Alexandre.
> > >>
> > >> Hmm.
> > >>
> > >> Please don't apply fixes like these directly to your tree, keep the
> > >> broken parts (or drop the tree that introduced it). It makes the
> > >> process of getting the fixes in where they really have to go much more
> > >> error prone, since there's no way to track whether they have landed in
> > >> the right place yet or not.
> > >
> > > I've found that fixing one build error often subsequent build failures,
> > > which would go unnoticed if I dropped the trees or let the breakage
> > > unfixed.
> > 
> > Yeah, that's what happened with the GPIO subsystem on this release --
> > there are two build errors but your fix resolves one of them such at
> > the other one is exposed. It makes it confusing to bisect down to root
> > cause. I'd almost rather have your tree just being broken, but patches
> > submitted and sent in to the maintainer in question if you want to get
> > it fixed ASAP.
> 
> I guess I could probably just push the final merge commit as a tree, but
> it would require me to very strongly resist my compulsive urge not to
> push something that doesn't even build.
> 
"Doesn't even build" is relative, though. After all, there still _are_
18 build failures out of 106 in my test builds alone. Where do you draw
the line ? arm failures are bad, who cares about blackfin ?

Guenter

Re: linux-next: Tree for Oct 24

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 4461 bytes --]

On Fri, Oct 25, 2013 at 08:02:28AM -0700, Guenter Roeck wrote:
> On Fri, Oct 25, 2013 at 04:17:08PM +0200, Thierry Reding wrote:
> > On Fri, Oct 25, 2013 at 06:43:53AM -0700, Olof Johansson wrote:
> > > On Fri, Oct 25, 2013 at 6:35 AM, Thierry Reding
> > > <thierry.reding@gmail.com> wrote:
> > > > On Fri, Oct 25, 2013 at 06:16:02AM -0700, Olof Johansson wrote:
> > > >> On Fri, Oct 25, 2013 at 1:35 AM, Thierry Reding
> > > >> <thierry.reding@gmail.com> wrote:
> > > >> > On Thu, Oct 24, 2013 at 10:02:22PM -0700, Guenter Roeck wrote:
> > > >> >> On 10/24/2013 09:31 AM, Thierry Reding wrote:
> > > >> >> >Hi all,
> > > >> >> >
> > > >> >> >I've uploaded today's linux-next tree to the master branch of the
> > > >> >> >repository below:
> > > >> >> >
> > > >> >> >         git://gitorious.org/thierryreding/linux-next.git
> > > >> >> >
> > > >> >> >A next-20131024 tag is also provided for convenience.
> > > >> >> >
> > > >> >> >Quite a few new conflicts. Some of them non-trivial. I've fixed another
> > > >> >> >set of build failures, so 32-bit and 64-bit allmodconfigs build fine on
> > > >> >> >x86. ARM and x86 default configurations also build fine. PowerPC is in
> > > >> >> >pretty bad shape, mostly due to some OF header rework going on.
> > > >> >> >
> > > >> >>
> > > >> >> Hmm ... I see
> > > >> >>
> > > >> >> Building arm:defconfig ... failed
> > > >> >> --------------
> > > >> >> Error log:
> > > >> >> drivers/built-in.o: In function `mmc_gpio_request_cd':
> > > >> >> clkdev.c:(.text+0x74cf8): undefined reference to `devm_gpio_request_one'
> > > >> >> make: *** [vmlinux] Error 1
> > > >> >>
> > > >> >> Otherwise pretty much the same as yesterday, with a build log of
> > > >> >>       total: 110 pass: 88 skipped: 4 fail: 18
> > > >> >>
> > > >> >> This is with "v3.12-rc5-7941-g765f88c".
> > > >> >
> > > >> > Yeah, I saw the devm_gpio_request_one() errors too. They happened for 3
> > > >> > boards on ARM I think. Must have forgotten to update the summary email.
> > > >> > I'll see if I can come up with a patch to fix the GPIO related build
> > > >> > failures, or at least report it to LinusW or Alexandre.
> > > >>
> > > >> Hmm.
> > > >>
> > > >> Please don't apply fixes like these directly to your tree, keep the
> > > >> broken parts (or drop the tree that introduced it). It makes the
> > > >> process of getting the fixes in where they really have to go much more
> > > >> error prone, since there's no way to track whether they have landed in
> > > >> the right place yet or not.
> > > >
> > > > I've found that fixing one build error often subsequent build failures,
> > > > which would go unnoticed if I dropped the trees or let the breakage
> > > > unfixed.
> > > 
> > > Yeah, that's what happened with the GPIO subsystem on this release --
> > > there are two build errors but your fix resolves one of them such at
> > > the other one is exposed. It makes it confusing to bisect down to root
> > > cause. I'd almost rather have your tree just being broken, but patches
> > > submitted and sent in to the maintainer in question if you want to get
> > > it fixed ASAP.
> > 
> > I guess I could probably just push the final merge commit as a tree, but
> > it would require me to very strongly resist my compulsive urge not to
> > push something that doesn't even build.
> > 
> "Doesn't even build" is relative, though. After all, there still _are_
> 18 build failures out of 106 in my test builds alone. Where do you draw
> the line ? arm failures are bad, who cares about blackfin ?

Well, I've been doing x86, ARM and PowerPC builds and of those only 3
are failing and I didn't fix them because I didn't really know how to.
But you're right, I guess one has to draw the line somewhere, and if
people prefer the tree to just be broken rather than with odd fixes on
top, then that's the way it going to be.

For now I've settled on pushing a branch which has only the fixes that
are required to make the trees work happily together and a separate tag
which has the patches that unbreak subsystem trees.

The reason I usually want linux-next to build is because I know that
various people rely on it for their daily work, so my reasoning was that
if I fix it before they even start using it, then they get to spend
their time with something more useful and only one person ends up fixing
the build issues instead of everyone.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]

Re: linux-next: Tree for Oct 24

[Guenter Roeck]

On Fri, Oct 25, 2013 at 05:17:18PM +0200, Thierry Reding wrote:
> > > 
> > "Doesn't even build" is relative, though. After all, there still _are_
> > 18 build failures out of 106 in my test builds alone. Where do you draw
> > the line ? arm failures are bad, who cares about blackfin ?
> 
> Well, I've been doing x86, ARM and PowerPC builds and of those only 3
> are failing and I didn't fix them because I didn't really know how to.
> But you're right, I guess one has to draw the line somewhere, and if
> people prefer the tree to just be broken rather than with odd fixes on
> top, then that's the way it going to be.
> 
> For now I've settled on pushing a branch which has only the fixes that
> are required to make the trees work happily together and a separate tag
> which has the patches that unbreak subsystem trees.
> 
> The reason I usually want linux-next to build is because I know that
> various people rely on it for their daily work, so my reasoning was that
> if I fix it before they even start using it, then they get to spend
> their time with something more useful and only one person ends up fixing
> the build issues instead of everyone.
> 
Frankly, I don't even know what the best approach would be.
Ultimately you are stuck between a rock and a hard place: You want the tree
to build so people can use it, but each patch you apply yourself might 
result in it not getting fixed in the contributing repository.

I think one problem we have is how to report breakages. Any summary 
mail or web page doesn't help if no one looks at it. It does help lot
to send specific e-mail along the line of "Commit 'bla' caused build 'x'
to fail as follows" to the respective mailing list and patch authors,
but that takes a lot of time which at least I don't have. And people
might get annoyed by automated e-mails, so that might not be a good
idea either. 

Guenter

Re: linux-next: Tree for Oct 24

[Geert Uytterhoeven]

On Fri, Oct 25, 2013 at 7:17 PM, Guenter Roeck <linux@roeck-us.net> wrote:
> I think one problem we have is how to report breakages. Any summary
> mail or web page doesn't help if no one looks at it. It does help lot
> to send specific e-mail along the line of "Commit 'bla' caused build 'x'
> to fail as follows" to the respective mailing list and patch authors,
> but that takes a lot of time which at least I don't have. And people
> might get annoyed by automated e-mails, so that might not be a good
> idea either.

In theory, these blame emails can be automated using some git bisect
scripting.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

linux-next: manual merge of the c6x tree

[Thierry Reding]

Today's linux-next merge of the c6x tree got a conflict in

	arch/arm/Kconfig

caused by commits 148104c (ARM: 7854/1: lockref: add support for lockless
lockrefs using cmpxchg64) and commit d701884 (arm: select
ARCH_MIGHT_HAVE_PC_PARPORT).

I fixed it up (see below). Please verify that the resolution looks good.

Thanks,
Thierry
---
diff --cc arch/arm/Kconfig
index c06647d,7db8abe0..b6a708e
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@@ -5,7 -5,7 +5,8 @@@ config AR
  	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
  	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
  	select ARCH_HAVE_CUSTOM_GPIO_H
 +	select ARCH_USE_CMPXCHG_LOCKREF
+ 	select ARCH_MIGHT_HAVE_PC_PARPORT
  	select ARCH_WANT_IPC_PARSE_VERSION
  	select BUILDTIME_EXTABLE_SORT if MMU
  	select CLONE_BACKWARDS

linux-next: manual merge of the h8300-remove tree

[Thierry Reding]

Today's linux-next tree of the h8300-remove tree got a conflict in

	drivers/parport/Kconfig

caused by commits e9783b0 (Revert "drivers: parport: Kconfig: exclude h8300
for PARPORT_PC") and d90c3eb (Kconfig cleanup (PARPORT_PC dependencies)).

I fixed it up (see below). Please verify that the resolution looks good.

Thanks,
Thierry
---
diff --cc drivers/parport/Kconfig
index f536685,dc82ef0..2225237
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@@ -41,8 -35,10 +41,7 @@@ if PARPOR
  
  config PARPORT_PC
  	tristate "PC-style hardware"
 -	depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && !S390 && \
 -		(!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN && \
 -		!XTENSA && !CRIS
 -
 +	depends on ARCH_MIGHT_HAVE_PC_PARPORT
- 
  	---help---
  	  You should say Y here if you have a PC-style parallel port. All
  	  IBM PC compatible computers and some Alphas have PC-style

Re: linux-next: manual merge of the h8300-remove tree

[Mark Salter]

On Fri, 2013-10-25 at 15:03 +0200, Thierry Reding wrote:
> Today's linux-next tree of the h8300-remove tree got a conflict in
> 
> 	drivers/parport/Kconfig
> 
> caused by commits e9783b0 (Revert "drivers: parport: Kconfig: exclude h8300
> for PARPORT_PC") and d90c3eb (Kconfig cleanup (PARPORT_PC dependencies)).
> 
> I fixed it up (see below). Please verify that the resolution looks good.
> 
> Thanks,
> Thierry
> ---
> diff --cc drivers/parport/Kconfig
> index f536685,dc82ef0..2225237
> --- a/drivers/parport/Kconfig
> +++ b/drivers/parport/Kconfig
> @@@ -41,8 -35,10 +41,7 @@@ if PARPOR
>   
>   config PARPORT_PC
>   	tristate "PC-style hardware"
>  -	depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && !S390 && \
>  -		(!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN && \
>  -		!XTENSA && !CRIS
>  -
>  +	depends on ARCH_MIGHT_HAVE_PC_PARPORT
> - 
>   	---help---
>   	  You should say Y here if you have a PC-style parallel port. All
>   	  IBM PC compatible computers and some Alphas have PC-style

Yes, that looks right. With the PC_PARPORT cleanup, h8300 doesn't need
to exclude itself. It is now excluded by default.

Re: linux-next: manual merge of the h8300-remove tree

[Guenter Roeck]

On Fri, Oct 25, 2013 at 03:03:40PM +0200, Thierry Reding wrote:
> Today's linux-next tree of the h8300-remove tree got a conflict in
> 
> 	drivers/parport/Kconfig
> 
> caused by commits e9783b0 (Revert "drivers: parport: Kconfig: exclude h8300
> for PARPORT_PC") and d90c3eb (Kconfig cleanup (PARPORT_PC dependencies)).
> 
> I fixed it up (see below). Please verify that the resolution looks good.
> 
> Thanks,
> Thierry
> ---
> diff --cc drivers/parport/Kconfig
> index f536685,dc82ef0..2225237
> --- a/drivers/parport/Kconfig
> +++ b/drivers/parport/Kconfig
> @@@ -41,8 -35,10 +41,7 @@@ if PARPOR
>   
>   config PARPORT_PC
>   	tristate "PC-style hardware"
>  -	depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && !S390 && \
>  -		(!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN && \
>  -		!XTENSA && !CRIS
>  -
>  +	depends on ARCH_MIGHT_HAVE_PC_PARPORT
> - 
>   	---help---
>   	  You should say Y here if you have a PC-style parallel port. All
>   	  IBM PC compatible computers and some Alphas have PC-style
> 
I dropped the patch (revert) causing the conflict.

Guenter

linux-next: manual merge of the mfd-lj tree

[Thierry Reding]

Today's linux-next merge of the mfd-lj tree got conflicts in

	sound/soc/codecs/mc13783.c

caused by commits 9f6f0af (ASoC: mc13783: add spi errata fix), fd792f8
(mfd: mc13xxx: Move SPI erratum workaround into SPI I/O function) and
2d9215c (ASoC: mc13783: Use regmap directly from ASoC).

I fixed it up and the diff turned up empty, so I think it can't be all
that wrong.

Thanks,
Thierry

linux-next: manual merge of the tip tree

[Thierry Reding]

Today's linux-next merge of the tip tree got conflicts in

	tools/perf/config/Makefile
	tools/perf/config/feature-tests.mak

caused by commits 405ffbd (perf tools: Check libunwind for availability of
dwarf parsing feature) and mostly 308e1e7 (tools/perf/build: Clean up the
libunwind logic in config/Makefile) as well as various follow-up patches.

I fixed it up (see below). Please verify that the resolution looks good.
Also note that this isn't really a trivial resolution of a conflict, but
required modifying various other files. That causes rerere magic not to
work and needs part of conflict to be resolved manually. Perhaps a good
idea would be to rebase Jean's patch on top of the cleanups going on in
the tip tree? Perhaps even carry the patch in the tip tree?

Thanks,
Thierry
---
diff --cc tools/perf/config/Makefile
index 75b93d7,c516d6b..e4d06b2
--- a/tools/perf/config/Makefile
+++ b/tools/perf/config/Makefile
@@@ -29,13 -29,9 +29,13 @@@ ifeq ($(ARCH),x86_64
    NO_PERF_REGS := 0
    LIBUNWIND_LIBS = -lunwind -lunwind-x86_64
  endif
 +ifeq ($(ARCH),arm)
 +  NO_PERF_REGS := 0
 +  LIBUNWIND_LIBS = -lunwind -lunwind-arm
 +endif
  
  ifeq ($(NO_PERF_REGS),0)
-   CFLAGS += -DHAVE_PERF_REGS
+   CFLAGS += -DHAVE_PERF_REGS_SUPPORT
  endif
  
  ifeq ($(src-perf),)
@@@ -93,20 -85,125 +89,126 @@@ CFLAGS += -std=gnu9
  
  EXTLIBS = -lelf -lpthread -lrt -lm -ldl
  
- ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -fstack-protector-all,-fstack-protector-all),y)
-   CFLAGS += -fstack-protector-all
+ ifneq ($(OUTPUT),)
+   OUTPUT_FEATURES = $(OUTPUT)config/feature-checks/
+   $(shell mkdir -p $(OUTPUT_FEATURES))
  endif
  
- ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -Wstack-protector,-Wstack-protector),y)
-   CFLAGS += -Wstack-protector
+ feature_check = $(eval $(feature_check_code))
+ define feature_check_code
+   feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) LDFLAGS=$(LDFLAGS) -C config/feature-checks test-$1 >/dev/null 2>/dev/null && echo 1 || echo 0)
+ endef
+ 
+ feature_set = $(eval $(feature_set_code))
+ define feature_set_code
+   feature-$(1) := 1
+ endef
+ 
+ #
+ # Build the feature check binaries in parallel, ignore errors, ignore return value and suppress output:
+ #
+ 
+ #
+ # Note that this is not a complete list of all feature tests, just
+ # those that are typically built on a fully configured system.
+ #
+ # [ Feature tests not mentioned here have to be built explicitly in
+ #   the rule that uses them - an example for that is the 'bionic'
+ #   feature check. ]
+ #
+ CORE_FEATURE_TESTS =			\
+ 	backtrace			\
+ 	dwarf				\
+ 	fortify-source			\
+ 	glibc				\
+ 	gtk2				\
+ 	gtk2-infobar			\
+ 	libaudit			\
+ 	libbfd				\
+ 	libelf				\
+ 	libelf-getphdrnum		\
+ 	libelf-mmap			\
+ 	libnuma				\
+ 	libperl				\
+ 	libpython			\
+ 	libpython-version		\
+ 	libslang			\
+ 	libunwind			\
++	libunwind-debug-frame		\
+ 	on-exit				\
+ 	stackprotector			\
+ 	stackprotector-all
+ 
+ #
+ # So here we detect whether test-all was rebuilt, to be able
+ # to skip the print-out of the long features list if the file
+ # existed before and after it was built:
+ #
+ ifeq ($(wildcard $(OUTPUT)config/feature-checks/test-all),)
+   test-all-failed := 1
+ else
+   test-all-failed := 0
+ endif
+ 
+ #
+ # Special fast-path for the 'all features are available' case:
+ #
+ $(call feature_check,all,$(MSG))
+ 
+ #
+ # Just in case the build freshly failed, make sure we print the
+ # feature matrix:
+ #
+ ifeq ($(feature-all), 0)
+   test-all-failed := 1
+ endif
+ 
+ ifeq ($(test-all-failed),1)
+   $(info )
+   $(info Auto-detecting system features:)
+ endif
+ 
+ ifeq ($(feature-all), 1)
+   #
+   # test-all.c passed - just set all the core feature flags to 1:
+   #
+   $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_set,$(feat)))
+ else
+   $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) LDFLAGS=$(LDFLAGS) -i -j -C config/feature-checks $(CORE_FEATURE_TESTS) >/dev/null 2>&1)
+   $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_check,$(feat)))
+ endif
+ 
+ #
+ # Print the result of the feature test:
+ #
+ feature_print = $(eval $(feature_print_code)) $(info $(MSG))
+ 
+ define feature_print_code
+   ifeq ($(feature-$(1)), 1)
+     MSG = $(shell printf '...%30s: [ \033[32mon\033[m  ]' $(1))
+   else
+     MSG = $(shell printf '...%30s: [ \033[31mOFF\033[m ]' $(1))
+   endif
+ endef
+ 
+ #
+ # Only print out our features if we rebuilt the testcases or if a test failed:
+ #
+ ifeq ($(test-all-failed), 1)
+   $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_print,$(feat)))
+   $(info )
  endif
  
- ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -Wvolatile-register-var,-Wvolatile-register-var),y)
-   CFLAGS += -Wvolatile-register-var
+ ifeq ($(feature-stackprotector-all), 1)
+   CFLAGS += -fstack-protector-all
+ endif
+ 
+ ifeq ($(feature-stackprotector), 1)
+   CFLAGS += -Wstack-protector
  endif
  
- ifndef PERF_DEBUG
-   ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -D_FORTIFY_SOURCE=2,-D_FORTIFY_SOURCE=2),y)
+ ifeq ($(DEBUG),0)
+   ifeq ($(feature-fortify-source), 1)
      CFLAGS += -D_FORTIFY_SOURCE=2
    endif
  endif
@@@ -179,64 -274,55 +279,59 @@@ els
  endif # NO_LIBELF
  
  ifndef NO_LIBELF
- CFLAGS += -DLIBELF_SUPPORT
- FLAGS_LIBELF=$(CFLAGS) $(LDFLAGS) $(EXTLIBS)
- ifeq ($(call try-cc,$(SOURCE_ELF_MMAP),$(FLAGS_LIBELF),-DLIBELF_MMAP),y)
-   CFLAGS += -DLIBELF_MMAP
- endif
- ifeq ($(call try-cc,$(SOURCE_ELF_GETPHDRNUM),$(FLAGS_LIBELF),-DHAVE_ELF_GETPHDRNUM),y)
-   CFLAGS += -DHAVE_ELF_GETPHDRNUM
- endif
+   CFLAGS += -DHAVE_LIBELF_SUPPORT
  
- # include ARCH specific config
- -include $(src-perf)/arch/$(ARCH)/Makefile
+   ifeq ($(feature-libelf-mmap), 1)
+     CFLAGS += -DHAVE_LIBELF_MMAP_SUPPORT
+   endif
  
- ifndef NO_DWARF
- ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
-   msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
-   NO_DWARF := 1
- else
-   CFLAGS += -DDWARF_SUPPORT $(LIBDW_CFLAGS)
-   LDFLAGS += $(LIBDW_LDFLAGS)
-   EXTLIBS += -lelf -ldw
- endif # PERF_HAVE_DWARF_REGS
- endif # NO_DWARF
+   ifeq ($(feature-libelf-getphdrnum), 1)
+     CFLAGS += -DHAVE_ELF_GETPHDRNUM_SUPPORT
+   endif
  
- endif # NO_LIBELF
+   # include ARCH specific config
+   -include $(src-perf)/arch/$(ARCH)/Makefile
  
- ifndef NO_LIBELF
- CFLAGS += -DLIBELF_SUPPORT
- FLAGS_LIBELF=$(CFLAGS) $(LDFLAGS) $(EXTLIBS)
- ifeq ($(call try-cc,$(SOURCE_ELF_MMAP),$(FLAGS_LIBELF),-DLIBELF_MMAP),y)
-   CFLAGS += -DLIBELF_MMAP
- endif # try-cc
+   ifndef NO_DWARF
+     ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
+       msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
+       NO_DWARF := 1
+     else
+       CFLAGS += -DHAVE_DWARF_SUPPORT $(LIBDW_CFLAGS)
+       LDFLAGS += $(LIBDW_LDFLAGS)
+       EXTLIBS += -lelf -ldw
+     endif # PERF_HAVE_DWARF_REGS
+   endif # NO_DWARF
  endif # NO_LIBELF
  
 -# There's only x86 (both 32 and 64) support for CFI unwind so far
 -ifneq ($(ARCH),x86)
 +ifeq ($(LIBUNWIND_LIBS),)
    NO_LIBUNWIND := 1
  endif
  
  ifndef NO_LIBUNWIND
- # for linking with debug library, run like:
- # make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/
- ifdef LIBUNWIND_DIR
-   LIBUNWIND_CFLAGS  := -I$(LIBUNWIND_DIR)/include
-   LIBUNWIND_LDFLAGS := -L$(LIBUNWIND_DIR)/lib
- endif
+   #
+   # For linking with debug library, run like:
+   #
+   #   make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/
+   #
+   ifdef LIBUNWIND_DIR
+     LIBUNWIND_CFLAGS  := -I$(LIBUNWIND_DIR)/include
+     LIBUNWIND_LDFLAGS := -L$(LIBUNWIND_DIR)/lib
+   endif
  
- FLAGS_UNWIND=$(LIBUNWIND_CFLAGS) $(CFLAGS) $(LIBUNWIND_LDFLAGS) $(LDFLAGS) $(EXTLIBS) $(LIBUNWIND_LIBS)
- ifneq ($(call try-cc,$(SOURCE_LIBUNWIND),$(FLAGS_UNWIND),libunwind),y)
-   msg := $(warning No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 1.1);
-   NO_LIBUNWIND := 1
- endif # Libunwind support
- ifneq ($(call try-cc,$(SOURCE_LIBUNWIND_DEBUG_FRAME),$(FLAGS_UNWIND),libunwind debug_frame),y)
-   msg := $(warning No debug_frame support found in libunwind);
- CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
- endif # debug_frame support in libunwind
- endif # NO_LIBUNWIND
+   ifneq ($(feature-libunwind), 1)
 -    msg := $(warning No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 0.99);
++    msg := $(warning No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 1.1);
+     NO_LIBUNWIND := 1
++  else
++    ifneq ($(feature-libunwind-debug-frame), 1)
++      msg := $(warning No debug_frame support found in libunwind);
++      CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
++    endif
+   endif
+ endif
  
  ifndef NO_LIBUNWIND
-   CFLAGS += -DLIBUNWIND_SUPPORT
+   CFLAGS += -DHAVE_LIBUNWIND_SUPPORT
    EXTLIBS += $(LIBUNWIND_LIBS)
    CFLAGS += $(LIBUNWIND_CFLAGS)
    LDFLAGS += $(LIBUNWIND_LDFLAGS)
diff --cc tools/perf/config/feature-checks/Makefile
index 0000000,452b67c..abaf8f4
mode 000000,100644..100644
--- a/tools/perf/config/feature-checks/Makefile
+++ b/tools/perf/config/feature-checks/Makefile
@@@ -1,0 -1,144 +1,148 @@@
+ 
+ FILES=					\
+ 	test-all			\
+ 	test-backtrace			\
+ 	test-bionic			\
+ 	test-dwarf			\
+ 	test-fortify-source		\
+ 	test-glibc			\
+ 	test-gtk2			\
+ 	test-gtk2-infobar		\
+ 	test-hello			\
+ 	test-libaudit			\
+ 	test-libbfd			\
+ 	test-liberty			\
+ 	test-liberty-z			\
+ 	test-cplus-demangle		\
+ 	test-libelf			\
+ 	test-libelf-getphdrnum		\
+ 	test-libelf-mmap		\
+ 	test-libnuma			\
+ 	test-libperl			\
+ 	test-libpython			\
+ 	test-libpython-version		\
+ 	test-libslang			\
+ 	test-libunwind			\
++	test-libunwind-debug-frame	\
+ 	test-on-exit			\
+ 	test-stackprotector-all		\
+ 	test-stackprotector
+ 
+ CC := $(CC) -MD
+ 
+ all: $(FILES)
+ 
+ BUILD = $(CC) $(LDFLAGS) -o $(OUTPUT)$@ $@.c
+ 
+ ###############################
+ 
+ test-all:
+ 	$(BUILD) -Werror -fstack-protector -fstack-protector-all -O2 -Werror -D_FORTIFY_SOURCE=2 -ldw -lelf -lnuma -lunwind -lunwind-x86_64 -lelf -laudit -I/usr/include/slang -lslang $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null) $(FLAGS_PERL_EMBED) $(FLAGS_PYTHON_EMBED) -DPACKAGE='"perf"' -lbfd -ldl
+ 
+ test-hello:
+ 	$(BUILD)
+ 
+ test-stackprotector-all:
+ 	$(BUILD) -Werror -fstack-protector-all
+ 
+ test-stackprotector:
+ 	$(BUILD) -Werror -fstack-protector -Wstack-protector
+ 
+ test-fortify-source:
+ 	$(BUILD) -O2 -Werror -D_FORTIFY_SOURCE=2
+ 
+ test-bionic:
+ 	$(BUILD)
+ 
+ test-libelf:
+ 	$(BUILD) -lelf
+ 
+ test-glibc:
+ 	$(BUILD)
+ 
+ test-dwarf:
+ 	$(BUILD) -ldw
+ 
+ test-libelf-mmap:
+ 	$(BUILD) -lelf
+ 
+ test-libelf-getphdrnum:
+ 	$(BUILD) -lelf
+ 
+ test-libnuma:
+ 	$(BUILD) -lnuma
+ 
+ test-libunwind:
+ 	$(BUILD) -lunwind -lunwind-x86_64 -lelf
+ 
++test-libunwind-debug-frame:
++	$(BUILD) -lunwind -lunwind-x86_64 -lelf
++
+ test-libaudit:
+ 	$(BUILD) -laudit
+ 
+ test-libslang:
+ 	$(BUILD) -I/usr/include/slang -lslang
+ 
+ test-gtk2:
+ 	$(BUILD) $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null)
+ 
+ test-gtk2-infobar:
+ 	$(BUILD) $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null)
+ 
+ grep-libs  = $(filter -l%,$(1))
+ strip-libs = $(filter-out -l%,$(1))
+ 
+ PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null)
+ PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS))
+ PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
+ PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
+ FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
+ 
+ test-libperl:
+ 	$(BUILD) $(FLAGS_PERL_EMBED)
+ 
+ override PYTHON := python
+ override PYTHON_CONFIG := python-config
+ 
+ escape-for-shell-sq =  $(subst ','\'',$(1))
+ shell-sq = '$(escape-for-shell-sq)'
+ 
+ PYTHON_CONFIG_SQ = $(call shell-sq,$(PYTHON_CONFIG))
+ 
+ PYTHON_EMBED_LDOPTS = $(shell $(PYTHON_CONFIG_SQ) --ldflags 2>/dev/null)
+ PYTHON_EMBED_LDFLAGS = $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
+ PYTHON_EMBED_LIBADD = $(call grep-libs,$(PYTHON_EMBED_LDOPTS))
+ PYTHON_EMBED_CCOPTS = $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null)
+ FLAGS_PYTHON_EMBED = $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
+ 
+ test-libpython:
+ 	$(BUILD) $(FLAGS_PYTHON_EMBED)
+ 
+ test-libpython-version:
+ 	$(BUILD) $(FLAGS_PYTHON_EMBED)
+ 
+ test-libbfd:
+ 	$(BUILD) -DPACKAGE='"perf"' -lbfd -ldl
+ 
+ test-liberty:
+ 	$(CC) -o $(OUTPUT)$@ test-libbfd.c -DPACKAGE='"perf"' -lbfd -ldl -liberty
+ 
+ test-liberty-z:
+ 	$(CC) -o $(OUTPUT)$@ test-libbfd.c -DPACKAGE='"perf"' -lbfd -ldl -liberty -lz
+ 
+ test-cplus-demangle:
+ 	$(BUILD) -liberty
+ 
+ test-on-exit:
+ 	$(BUILD)
+ 
+ test-backtrace:
+ 	$(BUILD)
+ 
+ -include *.d
+ 
+ ###############################
+ 
+ clean:
+ 	rm -f $(FILES) *.d
diff --cc tools/perf/config/feature-checks/test-all.c
index 0000000,50d4318..ed8aa7b
mode 000000,100644..100644
--- a/tools/perf/config/feature-checks/test-all.c
+++ b/tools/perf/config/feature-checks/test-all.c
@@@ -1,0 -1,106 +1,111 @@@
+ /*
+  * test-all.c: Try to build all the main testcases at once.
+  *
+  * A well-configured system will have all the prereqs installed, so we can speed
+  * up auto-detection on such systems.
+  */
+ 
+ /*
+  * Quirk: Python and Perl headers cannot be in arbitrary places, so keep
+  * these 3 testcases at the top:
+  */
+ #define main main_test_libpython
+ # include "test-libpython.c"
+ #undef main
+ 
+ #define main main_test_libpython_version
+ # include "test-libpython-version.c"
+ #undef main
+ 
+ #define main main_test_libperl
+ # include "test-libperl.c"
+ #undef main
+ 
+ #define main main_test_hello
+ # include "test-hello.c"
+ #undef main
+ 
+ #define main main_test_libelf
+ # include "test-libelf.c"
+ #undef main
+ 
+ #define main main_test_libelf_mmap
+ # include "test-libelf-mmap.c"
+ #undef main
+ 
+ #define main main_test_glibc
+ # include "test-glibc.c"
+ #undef main
+ 
+ #define main main_test_dwarf
+ # include "test-dwarf.c"
+ #undef main
+ 
+ #define main main_test_libelf_getphdrnum
+ # include "test-libelf-getphdrnum.c"
+ #undef main
+ 
+ #define main main_test_libunwind
+ # include "test-libunwind.c"
+ #undef main
+ 
++#define main main_test_libunwind_debug_frame
++# include "test-libunwind-debug-frame.c"
++#undef main
++
+ #define main main_test_libaudit
+ # include "test-libaudit.c"
+ #undef main
+ 
+ #define main main_test_libslang
+ # include "test-libslang.c"
+ #undef main
+ 
+ #define main main_test_gtk2
+ # include "test-gtk2.c"
+ #undef main
+ 
+ #define main main_test_gtk2_infobar
+ # include "test-gtk2-infobar.c"
+ #undef main
+ 
+ #define main main_test_libbfd
+ # include "test-libbfd.c"
+ #undef main
+ 
+ #define main main_test_on_exit
+ # include "test-on-exit.c"
+ #undef main
+ 
+ #define main main_test_backtrace
+ # include "test-backtrace.c"
+ #undef main
+ 
+ #define main main_test_libnuma
+ # include "test-libnuma.c"
+ #undef main
+ 
+ int main(int argc, char *argv[])
+ {
+ 	main_test_libpython();
+ 	main_test_libpython_version();
+ 	main_test_libperl();
+ 	main_test_hello();
+ 	main_test_libelf();
+ 	main_test_libelf_mmap();
+ 	main_test_glibc();
+ 	main_test_dwarf();
+ 	main_test_libelf_getphdrnum();
+ 	main_test_libunwind();
++	main_test_libunwind_debug_frame();
+ 	main_test_libaudit();
+ 	main_test_libslang();
+ 	main_test_gtk2(argc, argv);
+ 	main_test_gtk2_infobar(argc, argv);
+ 	main_test_libbfd();
+ 	main_test_on_exit();
+ 	main_test_backtrace();
+ 	main_test_libnuma();
+ 
+ 	return 0;
+ }
diff --cc tools/perf/config/feature-checks/test-libunwind-debug-frame.c
index 0000000,0000000..0ef8087
new file mode 100644
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-libunwind-debug-frame.c
@@@ -1,0 -1,0 +1,16 @@@
++#include <libunwind.h>
++#include <stdlib.h>
++
++extern int
++UNW_OBJ(dwarf_find_debug_frame) (int found, unw_dyn_info_t *di_debug,
++				 unw_word_t ip, unw_word_t segbase,
++				 const char *obj_name, unw_word_t start,
++				 unw_word_t end);
++
++#define dwarf_find_debug_frame UNW_OBJ(dwarf_find_debug_frame)
++
++int main(void)
++{
++	dwarf_find_debug_frame(0, NULL, 0, 0, NULL, 0, 0);
++	return 0;
++}

Re: linux-next: manual merge of the tip tree

[Will Deacon]

On Fri, Oct 25, 2013 at 02:03:42PM +0100, Thierry Reding wrote:
> Today's linux-next merge of the tip tree got conflicts in
> 
>         tools/perf/config/Makefile
>         tools/perf/config/feature-tests.mak
> 
> caused by commits 405ffbd (perf tools: Check libunwind for availability of
> dwarf parsing feature) and mostly 308e1e7 (tools/perf/build: Clean up the
> libunwind logic in config/Makefile) as well as various follow-up patches.
> 
> I fixed it up (see below). Please verify that the resolution looks good.
> Also note that this isn't really a trivial resolution of a conflict, but
> required modifying various other files. That causes rerere magic not to
> work and needs part of conflict to be resolved manually. Perhaps a good
> idea would be to rebase Jean's patch on top of the cleanups going on in
> the tip tree? Perhaps even carry the patch in the tip tree?

These came via my tree (arm perf) after discussion here:

  http://lists.infradead.org/pipermail/linux-arm-kernel/2013-October/203077.html

Now that they've been pulled by rmk, we can't back them out with ugly
reverts, so I'm not sure what we can do to resolve in the ARM tree; it looks
like the perf Makefile has changed significantly in -tip.

Will

Re: linux-next: manual merge of the tip tree

[Ingo Molnar]

* Will Deacon <will.deacon@arm.com> wrote:

> On Fri, Oct 25, 2013 at 02:03:42PM +0100, Thierry Reding wrote:
> > Today's linux-next merge of the tip tree got conflicts in
> > 
> >         tools/perf/config/Makefile
> >         tools/perf/config/feature-tests.mak
> > 
> > caused by commits 405ffbd (perf tools: Check libunwind for availability of
> > dwarf parsing feature) and mostly 308e1e7 (tools/perf/build: Clean up the
> > libunwind logic in config/Makefile) as well as various follow-up patches.
> > 
> > I fixed it up (see below). Please verify that the resolution looks good.
> > Also note that this isn't really a trivial resolution of a conflict, but
> > required modifying various other files. That causes rerere magic not to
> > work and needs part of conflict to be resolved manually. Perhaps a good
> > idea would be to rebase Jean's patch on top of the cleanups going on in
> > the tip tree? Perhaps even carry the patch in the tip tree?
> 
> These came via my tree (arm perf) after discussion here:
> 
>   http://lists.infradead.org/pipermail/linux-arm-kernel/2013-October/203077.html
> 
> Now that they've been pulled by rmk, we can't back them out with 
> ugly reverts, so I'm not sure what we can do to resolve in the ARM 
> tree; it looks like the perf Makefile has changed significantly in 
> -tip.

I realize that it was acked by Arnaldo, but for workflow reasons I'd 
really prefer it if non-trivial perf tooling patches went to Arnaldo 
as a pull request so that he can resolve any such conflicts. perf is 
in constant development so it's less work for you that way.

(Kernel side changes can go that route as well, as long as they are 
perf related.)

Thanks,

	Ingo

Re: linux-next: manual merge of the tip tree

[Will Deacon]

Hi Ingo,

[adding rmk]

On Sat, Oct 26, 2013 at 09:40:33AM +0100, Ingo Molnar wrote:
> * Will Deacon <will.deacon@arm.com> wrote:
> > On Fri, Oct 25, 2013 at 02:03:42PM +0100, Thierry Reding wrote:
> > > I fixed it up (see below). Please verify that the resolution looks good.
> > > Also note that this isn't really a trivial resolution of a conflict, but
> > > required modifying various other files. That causes rerere magic not to
> > > work and needs part of conflict to be resolved manually. Perhaps a good
> > > idea would be to rebase Jean's patch on top of the cleanups going on in
> > > the tip tree? Perhaps even carry the patch in the tip tree?
> > 
> > These came via my tree (arm perf) after discussion here:
> > 
> >   http://lists.infradead.org/pipermail/linux-arm-kernel/2013-October/203077.html
> > 
> > Now that they've been pulled by rmk, we can't back them out with 
> > ugly reverts, so I'm not sure what we can do to resolve in the ARM 
> > tree; it looks like the perf Makefile has changed significantly in 
> > -tip.
> 
> I realize that it was acked by Arnaldo, but for workflow reasons I'd 
> really prefer it if non-trivial perf tooling patches went to Arnaldo 
> as a pull request so that he can resolve any such conflicts. perf is 
> in constant development so it's less work for you that way.

Sure. I wasn't aware quite how much you guys had planned for the perf
Makefile and I (wrongly) assumed that Arnaldo's ack was enough of an
indication that conflicts would be unlikely and/or trivial.

In future, I'll push back on any perf changes outside of arch/ in my tree,
but that doesn't help us get out of the current situation: the patches are
currently sitting in rmk's tree for 3.13, so that won't meet with -tip
(outside of next) until Linus pulls them both. What can we do about that?

Will

Re: linux-next: manual merge of the tip tree

[Ingo Molnar]

* Will Deacon <will.deacon@arm.com> wrote:

> Hi Ingo,
> 
> [adding rmk]
> 
> On Sat, Oct 26, 2013 at 09:40:33AM +0100, Ingo Molnar wrote:
> > * Will Deacon <will.deacon@arm.com> wrote:
> > > On Fri, Oct 25, 2013 at 02:03:42PM +0100, Thierry Reding wrote:
> > > > I fixed it up (see below). Please verify that the resolution looks good.
> > > > Also note that this isn't really a trivial resolution of a conflict, but
> > > > required modifying various other files. That causes rerere magic not to
> > > > work and needs part of conflict to be resolved manually. Perhaps a good
> > > > idea would be to rebase Jean's patch on top of the cleanups going on in
> > > > the tip tree? Perhaps even carry the patch in the tip tree?
> > > 
> > > These came via my tree (arm perf) after discussion here:
> > > 
> > >   http://lists.infradead.org/pipermail/linux-arm-kernel/2013-October/203077.html
> > > 
> > > Now that they've been pulled by rmk, we can't back them out with 
> > > ugly reverts, so I'm not sure what we can do to resolve in the ARM 
> > > tree; it looks like the perf Makefile has changed significantly in 
> > > -tip.
> > 
> > I realize that it was acked by Arnaldo, but for workflow reasons I'd 
> > really prefer it if non-trivial perf tooling patches went to Arnaldo 
> > as a pull request so that he can resolve any such conflicts. perf is 
> > in constant development so it's less work for you that way.
> 
> Sure. I wasn't aware quite how much you guys had planned for the perf 
> Makefile and I (wrongly) assumed that Arnaldo's ack was enough of an 
> indication that conflicts would be unlikely and/or trivial.

That was a bit of unlucky timing.

> In future, I'll push back on any perf changes outside of arch/ in my 
> tree, but that doesn't help us get out of the current situation: the 
> patches are currently sitting in rmk's tree for 3.13, so that won't meet 
> with -tip (outside of next) until Linus pulls them both. What can we do 
> about that?

Unless you guys want to do a revert I guess there's not much to do but to 
warn Linus in the ARM pull request that a conflict is coming up.

Thanks,

	Ingo

Re: linux-next: manual merge of the tip tree

[Russell King - ARM Linux]

On Sun, Oct 27, 2013 at 08:12:37AM +0100, Ingo Molnar wrote:
> 
> * Will Deacon <will.deacon@arm.com> wrote:
> > In future, I'll push back on any perf changes outside of arch/ in my 
> > tree, but that doesn't help us get out of the current situation: the 
> > patches are currently sitting in rmk's tree for 3.13, so that won't meet 
> > with -tip (outside of next) until Linus pulls them both. What can we do 
> > about that?
> 
> Unless you guys want to do a revert I guess there's not much to do but to 
> warn Linus in the ARM pull request that a conflict is coming up.

>From Will's description, it sounded like this could be quite hairy to
fix up, so I'd like to include the conflict resolution in the pull
request so Linus has something to refer to if needed.  Could someone
please forward me that?

Thanks.

Re: linux-next: manual merge of the tip tree

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 2298 bytes --]

On Sun, Oct 27, 2013 at 10:00:48AM +0000, Russell King - ARM Linux wrote:
> On Sun, Oct 27, 2013 at 08:12:37AM +0100, Ingo Molnar wrote:
> > 
> > * Will Deacon <will.deacon@arm.com> wrote:
> > > In future, I'll push back on any perf changes outside of arch/ in my 
> > > tree, but that doesn't help us get out of the current situation: the 
> > > patches are currently sitting in rmk's tree for 3.13, so that won't meet 
> > > with -tip (outside of next) until Linus pulls them both. What can we do 
> > > about that?
> > 
> > Unless you guys want to do a revert I guess there's not much to do but to 
> > warn Linus in the ARM pull request that a conflict is coming up.
> 
> From Will's description, it sounded like this could be quite hairy to
> fix up, so I'd like to include the conflict resolution in the pull
> request so Linus has something to refer to if needed.  Could someone
> please forward me that?

Hi Russell,

I've attached the relevant parts of the resolution, although I'm not
sure if anybody's actually confirmed that it's correct. FWIW, if I run

	make tools/perf

I do get the expected output:

	Auto-detecting system features:
	...                     backtrace: [ on  ]
	...                         dwarf: [ on  ]
	...                fortify-source: [ on  ]
	...                         glibc: [ on  ]
	...                          gtk2: [ on  ]
	...                  gtk2-infobar: [ on  ]
	...                      libaudit: [ OFF ]
	...                        libbfd: [ OFF ]
	...                        libelf: [ on  ]
	...             libelf-getphdrnum: [ on  ]
	...                   libelf-mmap: [ on  ]
	...                       libnuma: [ OFF ]
	...                       libperl: [ on  ]
	...                     libpython: [ on  ]
	...             libpython-version: [ OFF ]
	...                      libslang: [ OFF ]
	...                     libunwind: [ on  ]
	...         libunwind-debug-frame: [ OFF ]
	...                       on-exit: [ on  ]
	...                stackprotector: [ on  ]
	...            stackprotector-all: [ on  ]

Which I guess means that the version of libunwind that I have doesn't
enable debug-frame support, but that's as expected according to the
package build script.

Thierry

[-- Attachment #1.2: arm-tip-merge --]
[-- Type: text/plain, Size: 15829 bytes --]

diff --cc tools/perf/config/Makefile
index 75b93d7,c516d6b..e4d06b2
--- a/tools/perf/config/Makefile
+++ b/tools/perf/config/Makefile
@@@ -29,13 -29,9 +29,13 @@@ ifeq ($(ARCH),x86_64
    NO_PERF_REGS := 0
    LIBUNWIND_LIBS = -lunwind -lunwind-x86_64
  endif
 +ifeq ($(ARCH),arm)
 +  NO_PERF_REGS := 0
 +  LIBUNWIND_LIBS = -lunwind -lunwind-arm
 +endif
  
  ifeq ($(NO_PERF_REGS),0)
-   CFLAGS += -DHAVE_PERF_REGS
+   CFLAGS += -DHAVE_PERF_REGS_SUPPORT
  endif
  
  ifeq ($(src-perf),)
@@@ -93,20 -85,125 +89,126 @@@ CFLAGS += -std=gnu9
  
  EXTLIBS = -lelf -lpthread -lrt -lm -ldl
  
- ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -fstack-protector-all,-fstack-protector-all),y)
-   CFLAGS += -fstack-protector-all
+ ifneq ($(OUTPUT),)
+   OUTPUT_FEATURES = $(OUTPUT)config/feature-checks/
+   $(shell mkdir -p $(OUTPUT_FEATURES))
  endif
  
- ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -Wstack-protector,-Wstack-protector),y)
-   CFLAGS += -Wstack-protector
+ feature_check = $(eval $(feature_check_code))
+ define feature_check_code
+   feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) LDFLAGS=$(LDFLAGS) -C config/feature-checks test-$1 >/dev/null 2>/dev/null && echo 1 || echo 0)
+ endef
+ 
+ feature_set = $(eval $(feature_set_code))
+ define feature_set_code
+   feature-$(1) := 1
+ endef
+ 
+ #
+ # Build the feature check binaries in parallel, ignore errors, ignore return value and suppress output:
+ #
+ 
+ #
+ # Note that this is not a complete list of all feature tests, just
+ # those that are typically built on a fully configured system.
+ #
+ # [ Feature tests not mentioned here have to be built explicitly in
+ #   the rule that uses them - an example for that is the 'bionic'
+ #   feature check. ]
+ #
+ CORE_FEATURE_TESTS =			\
+ 	backtrace			\
+ 	dwarf				\
+ 	fortify-source			\
+ 	glibc				\
+ 	gtk2				\
+ 	gtk2-infobar			\
+ 	libaudit			\
+ 	libbfd				\
+ 	libelf				\
+ 	libelf-getphdrnum		\
+ 	libelf-mmap			\
+ 	libnuma				\
+ 	libperl				\
+ 	libpython			\
+ 	libpython-version		\
+ 	libslang			\
+ 	libunwind			\
++	libunwind-debug-frame		\
+ 	on-exit				\
+ 	stackprotector			\
+ 	stackprotector-all
+ 
+ #
+ # So here we detect whether test-all was rebuilt, to be able
+ # to skip the print-out of the long features list if the file
+ # existed before and after it was built:
+ #
+ ifeq ($(wildcard $(OUTPUT)config/feature-checks/test-all),)
+   test-all-failed := 1
+ else
+   test-all-failed := 0
+ endif
+ 
+ #
+ # Special fast-path for the 'all features are available' case:
+ #
+ $(call feature_check,all,$(MSG))
+ 
+ #
+ # Just in case the build freshly failed, make sure we print the
+ # feature matrix:
+ #
+ ifeq ($(feature-all), 0)
+   test-all-failed := 1
+ endif
+ 
+ ifeq ($(test-all-failed),1)
+   $(info )
+   $(info Auto-detecting system features:)
+ endif
+ 
+ ifeq ($(feature-all), 1)
+   #
+   # test-all.c passed - just set all the core feature flags to 1:
+   #
+   $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_set,$(feat)))
+ else
+   $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) LDFLAGS=$(LDFLAGS) -i -j -C config/feature-checks $(CORE_FEATURE_TESTS) >/dev/null 2>&1)
+   $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_check,$(feat)))
+ endif
+ 
+ #
+ # Print the result of the feature test:
+ #
+ feature_print = $(eval $(feature_print_code)) $(info $(MSG))
+ 
+ define feature_print_code
+   ifeq ($(feature-$(1)), 1)
+     MSG = $(shell printf '...%30s: [ \033[32mon\033[m  ]' $(1))
+   else
+     MSG = $(shell printf '...%30s: [ \033[31mOFF\033[m ]' $(1))
+   endif
+ endef
+ 
+ #
+ # Only print out our features if we rebuilt the testcases or if a test failed:
+ #
+ ifeq ($(test-all-failed), 1)
+   $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_print,$(feat)))
+   $(info )
  endif
  
- ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -Wvolatile-register-var,-Wvolatile-register-var),y)
-   CFLAGS += -Wvolatile-register-var
+ ifeq ($(feature-stackprotector-all), 1)
+   CFLAGS += -fstack-protector-all
+ endif
+ 
+ ifeq ($(feature-stackprotector), 1)
+   CFLAGS += -Wstack-protector
  endif
  
- ifndef PERF_DEBUG
-   ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -D_FORTIFY_SOURCE=2,-D_FORTIFY_SOURCE=2),y)
+ ifeq ($(DEBUG),0)
+   ifeq ($(feature-fortify-source), 1)
      CFLAGS += -D_FORTIFY_SOURCE=2
    endif
  endif
@@@ -179,64 -274,55 +279,59 @@@ els
  endif # NO_LIBELF
  
  ifndef NO_LIBELF
- CFLAGS += -DLIBELF_SUPPORT
- FLAGS_LIBELF=$(CFLAGS) $(LDFLAGS) $(EXTLIBS)
- ifeq ($(call try-cc,$(SOURCE_ELF_MMAP),$(FLAGS_LIBELF),-DLIBELF_MMAP),y)
-   CFLAGS += -DLIBELF_MMAP
- endif
- ifeq ($(call try-cc,$(SOURCE_ELF_GETPHDRNUM),$(FLAGS_LIBELF),-DHAVE_ELF_GETPHDRNUM),y)
-   CFLAGS += -DHAVE_ELF_GETPHDRNUM
- endif
+   CFLAGS += -DHAVE_LIBELF_SUPPORT
  
- # include ARCH specific config
- -include $(src-perf)/arch/$(ARCH)/Makefile
+   ifeq ($(feature-libelf-mmap), 1)
+     CFLAGS += -DHAVE_LIBELF_MMAP_SUPPORT
+   endif
  
- ifndef NO_DWARF
- ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
-   msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
-   NO_DWARF := 1
- else
-   CFLAGS += -DDWARF_SUPPORT $(LIBDW_CFLAGS)
-   LDFLAGS += $(LIBDW_LDFLAGS)
-   EXTLIBS += -lelf -ldw
- endif # PERF_HAVE_DWARF_REGS
- endif # NO_DWARF
+   ifeq ($(feature-libelf-getphdrnum), 1)
+     CFLAGS += -DHAVE_ELF_GETPHDRNUM_SUPPORT
+   endif
  
- endif # NO_LIBELF
+   # include ARCH specific config
+   -include $(src-perf)/arch/$(ARCH)/Makefile
  
- ifndef NO_LIBELF
- CFLAGS += -DLIBELF_SUPPORT
- FLAGS_LIBELF=$(CFLAGS) $(LDFLAGS) $(EXTLIBS)
- ifeq ($(call try-cc,$(SOURCE_ELF_MMAP),$(FLAGS_LIBELF),-DLIBELF_MMAP),y)
-   CFLAGS += -DLIBELF_MMAP
- endif # try-cc
+   ifndef NO_DWARF
+     ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
+       msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
+       NO_DWARF := 1
+     else
+       CFLAGS += -DHAVE_DWARF_SUPPORT $(LIBDW_CFLAGS)
+       LDFLAGS += $(LIBDW_LDFLAGS)
+       EXTLIBS += -lelf -ldw
+     endif # PERF_HAVE_DWARF_REGS
+   endif # NO_DWARF
  endif # NO_LIBELF
  
 -# There's only x86 (both 32 and 64) support for CFI unwind so far
 -ifneq ($(ARCH),x86)
 +ifeq ($(LIBUNWIND_LIBS),)
    NO_LIBUNWIND := 1
  endif
  
  ifndef NO_LIBUNWIND
- # for linking with debug library, run like:
- # make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/
- ifdef LIBUNWIND_DIR
-   LIBUNWIND_CFLAGS  := -I$(LIBUNWIND_DIR)/include
-   LIBUNWIND_LDFLAGS := -L$(LIBUNWIND_DIR)/lib
- endif
+   #
+   # For linking with debug library, run like:
+   #
+   #   make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/
+   #
+   ifdef LIBUNWIND_DIR
+     LIBUNWIND_CFLAGS  := -I$(LIBUNWIND_DIR)/include
+     LIBUNWIND_LDFLAGS := -L$(LIBUNWIND_DIR)/lib
+   endif
  
- FLAGS_UNWIND=$(LIBUNWIND_CFLAGS) $(CFLAGS) $(LIBUNWIND_LDFLAGS) $(LDFLAGS) $(EXTLIBS) $(LIBUNWIND_LIBS)
- ifneq ($(call try-cc,$(SOURCE_LIBUNWIND),$(FLAGS_UNWIND),libunwind),y)
-   msg := $(warning No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 1.1);
-   NO_LIBUNWIND := 1
- endif # Libunwind support
- ifneq ($(call try-cc,$(SOURCE_LIBUNWIND_DEBUG_FRAME),$(FLAGS_UNWIND),libunwind debug_frame),y)
-   msg := $(warning No debug_frame support found in libunwind);
- CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
- endif # debug_frame support in libunwind
- endif # NO_LIBUNWIND
+   ifneq ($(feature-libunwind), 1)
 -    msg := $(warning No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 0.99);
++    msg := $(warning No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 1.1);
+     NO_LIBUNWIND := 1
++  else
++    ifneq ($(feature-libunwind-debug-frame), 1)
++      msg := $(warning No debug_frame support found in libunwind);
++      CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
++    endif
+   endif
+ endif
  
  ifndef NO_LIBUNWIND
-   CFLAGS += -DLIBUNWIND_SUPPORT
+   CFLAGS += -DHAVE_LIBUNWIND_SUPPORT
    EXTLIBS += $(LIBUNWIND_LIBS)
    CFLAGS += $(LIBUNWIND_CFLAGS)
    LDFLAGS += $(LIBUNWIND_LDFLAGS)
diff --cc tools/perf/config/feature-checks/Makefile
index 0000000,452b67c..abaf8f4
mode 000000,100644..100644
--- a/tools/perf/config/feature-checks/Makefile
+++ b/tools/perf/config/feature-checks/Makefile
@@@ -1,0 -1,144 +1,148 @@@
+ 
+ FILES=					\
+ 	test-all			\
+ 	test-backtrace			\
+ 	test-bionic			\
+ 	test-dwarf			\
+ 	test-fortify-source		\
+ 	test-glibc			\
+ 	test-gtk2			\
+ 	test-gtk2-infobar		\
+ 	test-hello			\
+ 	test-libaudit			\
+ 	test-libbfd			\
+ 	test-liberty			\
+ 	test-liberty-z			\
+ 	test-cplus-demangle		\
+ 	test-libelf			\
+ 	test-libelf-getphdrnum		\
+ 	test-libelf-mmap		\
+ 	test-libnuma			\
+ 	test-libperl			\
+ 	test-libpython			\
+ 	test-libpython-version		\
+ 	test-libslang			\
+ 	test-libunwind			\
++	test-libunwind-debug-frame	\
+ 	test-on-exit			\
+ 	test-stackprotector-all		\
+ 	test-stackprotector
+ 
+ CC := $(CC) -MD
+ 
+ all: $(FILES)
+ 
+ BUILD = $(CC) $(LDFLAGS) -o $(OUTPUT)$@ $@.c
+ 
+ ###############################
+ 
+ test-all:
+ 	$(BUILD) -Werror -fstack-protector -fstack-protector-all -O2 -Werror -D_FORTIFY_SOURCE=2 -ldw -lelf -lnuma -lunwind -lunwind-x86_64 -lelf -laudit -I/usr/include/slang -lslang $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null) $(FLAGS_PERL_EMBED) $(FLAGS_PYTHON_EMBED) -DPACKAGE='"perf"' -lbfd -ldl
+ 
+ test-hello:
+ 	$(BUILD)
+ 
+ test-stackprotector-all:
+ 	$(BUILD) -Werror -fstack-protector-all
+ 
+ test-stackprotector:
+ 	$(BUILD) -Werror -fstack-protector -Wstack-protector
+ 
+ test-fortify-source:
+ 	$(BUILD) -O2 -Werror -D_FORTIFY_SOURCE=2
+ 
+ test-bionic:
+ 	$(BUILD)
+ 
+ test-libelf:
+ 	$(BUILD) -lelf
+ 
+ test-glibc:
+ 	$(BUILD)
+ 
+ test-dwarf:
+ 	$(BUILD) -ldw
+ 
+ test-libelf-mmap:
+ 	$(BUILD) -lelf
+ 
+ test-libelf-getphdrnum:
+ 	$(BUILD) -lelf
+ 
+ test-libnuma:
+ 	$(BUILD) -lnuma
+ 
+ test-libunwind:
+ 	$(BUILD) -lunwind -lunwind-x86_64 -lelf
+ 
++test-libunwind-debug-frame:
++	$(BUILD) -lunwind -lunwind-x86_64 -lelf
++
+ test-libaudit:
+ 	$(BUILD) -laudit
+ 
+ test-libslang:
+ 	$(BUILD) -I/usr/include/slang -lslang
+ 
+ test-gtk2:
+ 	$(BUILD) $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null)
+ 
+ test-gtk2-infobar:
+ 	$(BUILD) $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null)
+ 
+ grep-libs  = $(filter -l%,$(1))
+ strip-libs = $(filter-out -l%,$(1))
+ 
+ PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null)
+ PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS))
+ PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
+ PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
+ FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
+ 
+ test-libperl:
+ 	$(BUILD) $(FLAGS_PERL_EMBED)
+ 
+ override PYTHON := python
+ override PYTHON_CONFIG := python-config
+ 
+ escape-for-shell-sq =  $(subst ','\'',$(1))
+ shell-sq = '$(escape-for-shell-sq)'
+ 
+ PYTHON_CONFIG_SQ = $(call shell-sq,$(PYTHON_CONFIG))
+ 
+ PYTHON_EMBED_LDOPTS = $(shell $(PYTHON_CONFIG_SQ) --ldflags 2>/dev/null)
+ PYTHON_EMBED_LDFLAGS = $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
+ PYTHON_EMBED_LIBADD = $(call grep-libs,$(PYTHON_EMBED_LDOPTS))
+ PYTHON_EMBED_CCOPTS = $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null)
+ FLAGS_PYTHON_EMBED = $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
+ 
+ test-libpython:
+ 	$(BUILD) $(FLAGS_PYTHON_EMBED)
+ 
+ test-libpython-version:
+ 	$(BUILD) $(FLAGS_PYTHON_EMBED)
+ 
+ test-libbfd:
+ 	$(BUILD) -DPACKAGE='"perf"' -lbfd -ldl
+ 
+ test-liberty:
+ 	$(CC) -o $(OUTPUT)$@ test-libbfd.c -DPACKAGE='"perf"' -lbfd -ldl -liberty
+ 
+ test-liberty-z:
+ 	$(CC) -o $(OUTPUT)$@ test-libbfd.c -DPACKAGE='"perf"' -lbfd -ldl -liberty -lz
+ 
+ test-cplus-demangle:
+ 	$(BUILD) -liberty
+ 
+ test-on-exit:
+ 	$(BUILD)
+ 
+ test-backtrace:
+ 	$(BUILD)
+ 
+ -include *.d
+ 
+ ###############################
+ 
+ clean:
+ 	rm -f $(FILES) *.d
diff --cc tools/perf/config/feature-checks/test-all.c
index 0000000,50d4318..726be48
mode 000000,100644..100644
--- a/tools/perf/config/feature-checks/test-all.c
+++ b/tools/perf/config/feature-checks/test-all.c
@@@ -1,0 -1,106 +1,110 @@@
+ /*
+  * test-all.c: Try to build all the main testcases at once.
+  *
+  * A well-configured system will have all the prereqs installed, so we can speed
+  * up auto-detection on such systems.
+  */
+ 
+ /*
+  * Quirk: Python and Perl headers cannot be in arbitrary places, so keep
+  * these 3 testcases at the top:
+  */
+ #define main main_test_libpython
+ # include "test-libpython.c"
+ #undef main
+ 
+ #define main main_test_libpython_version
+ # include "test-libpython-version.c"
+ #undef main
+ 
+ #define main main_test_libperl
+ # include "test-libperl.c"
+ #undef main
+ 
+ #define main main_test_hello
+ # include "test-hello.c"
+ #undef main
+ 
+ #define main main_test_libelf
+ # include "test-libelf.c"
+ #undef main
+ 
+ #define main main_test_libelf_mmap
+ # include "test-libelf-mmap.c"
+ #undef main
+ 
+ #define main main_test_glibc
+ # include "test-glibc.c"
+ #undef main
+ 
+ #define main main_test_dwarf
+ # include "test-dwarf.c"
+ #undef main
+ 
+ #define main main_test_libelf_getphdrnum
+ # include "test-libelf-getphdrnum.c"
+ #undef main
+ 
+ #define main main_test_libunwind
+ # include "test-libunwind.c"
+ #undef main
+ 
++#define main main_test_libunwind_debug_frame
++# include "test-libunwind-debug-frame.c"
++#undef main
++
+ #define main main_test_libaudit
+ # include "test-libaudit.c"
+ #undef main
+ 
+ #define main main_test_libslang
+ # include "test-libslang.c"
+ #undef main
+ 
+ #define main main_test_gtk2
+ # include "test-gtk2.c"
+ #undef main
+ 
+ #define main main_test_gtk2_infobar
+ # include "test-gtk2-infobar.c"
+ #undef main
+ 
+ #define main main_test_libbfd
+ # include "test-libbfd.c"
+ #undef main
+ 
+ #define main main_test_on_exit
+ # include "test-on-exit.c"
+ #undef main
+ 
+ #define main main_test_backtrace
+ # include "test-backtrace.c"
+ #undef main
+ 
+ #define main main_test_libnuma
+ # include "test-libnuma.c"
+ #undef main
+ 
+ int main(int argc, char *argv[])
+ {
+ 	main_test_libpython();
+ 	main_test_libpython_version();
+ 	main_test_libperl();
+ 	main_test_hello();
+ 	main_test_libelf();
+ 	main_test_libelf_mmap();
+ 	main_test_glibc();
+ 	main_test_dwarf();
+ 	main_test_libelf_getphdrnum();
+ 	main_test_libunwind();
+ 	main_test_libaudit();
+ 	main_test_libslang();
+ 	main_test_gtk2(argc, argv);
+ 	main_test_gtk2_infobar(argc, argv);
+ 	main_test_libbfd();
+ 	main_test_on_exit();
+ 	main_test_backtrace();
+ 	main_test_libnuma();
+ 
+ 	return 0;
+ }
diff --cc tools/perf/config/feature-checks/test-libunwind-debug-frame.c
index 0000000,0000000..0ef8087
new file mode 100644
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-libunwind-debug-frame.c
@@@ -1,0 -1,0 +1,16 @@@
++#include <libunwind.h>
++#include <stdlib.h>
++
++extern int
++UNW_OBJ(dwarf_find_debug_frame) (int found, unw_dyn_info_t *di_debug,
++				 unw_word_t ip, unw_word_t segbase,
++				 const char *obj_name, unw_word_t start,
++				 unw_word_t end);
++
++#define dwarf_find_debug_frame UNW_OBJ(dwarf_find_debug_frame)
++
++int main(void)
++{
++	dwarf_find_debug_frame(0, NULL, 0, 0, NULL, 0, 0);
++	return 0;
++}

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]

Re: linux-next: manual merge of the tip tree

[Russell King - ARM Linux]

On Mon, Oct 28, 2013 at 08:47:22AM +0100, Thierry Reding wrote:
> On Sun, Oct 27, 2013 at 10:00:48AM +0000, Russell King - ARM Linux wrote:
> > On Sun, Oct 27, 2013 at 08:12:37AM +0100, Ingo Molnar wrote:
> > > 
> > > * Will Deacon <will.deacon@arm.com> wrote:
> > > > In future, I'll push back on any perf changes outside of arch/ in my 
> > > > tree, but that doesn't help us get out of the current situation: the 
> > > > patches are currently sitting in rmk's tree for 3.13, so that won't meet 
> > > > with -tip (outside of next) until Linus pulls them both. What can we do 
> > > > about that?
> > > 
> > > Unless you guys want to do a revert I guess there's not much to do but to 
> > > warn Linus in the ARM pull request that a conflict is coming up.
> > 
> > From Will's description, it sounded like this could be quite hairy to
> > fix up, so I'd like to include the conflict resolution in the pull
> > request so Linus has something to refer to if needed.  Could someone
> > please forward me that?
> 
> Hi Russell,
> 
> I've attached the relevant parts of the resolution, although I'm not
> sure if anybody's actually confirmed that it's correct.

I'm not sure whether that can happen any time before -final - Will is
(storm dependent) flying out to Linaro Connect today, and I've no idea
who to turn to for this to be tested for ARM.

I guess we have some time given that Linus has released -rc7 and his
comments during the Kernel Summit/in the rc7 announcement.

linux-next: manual merge of the kvm-arm tree

[Thierry Reding]

Today's linux-next merge of the kvm-arm tree got a conflict in

	arch/arm/kvm/reset.c

caused by commits e8c2d99 (KVM: ARM: Add support for Cortex-A7) and 7999b4d
(ARM: KVM: drop limitation to 4 CPU VMs).

I fixed it up (see below). Please verify that the resolution looks good.

Thanks,
Thierry
---
diff --cc arch/arm/kvm/reset.c
index d153e64,2c5add0..f558c07
--- a/arch/arm/kvm/reset.c
+++ b/arch/arm/kvm/reset.c
@@@ -64,9 -62,7 +62,7 @@@ int kvm_reset_vcpu(struct kvm_vcpu *vcp
  	switch (vcpu->arch.target) {
  	case KVM_ARM_TARGET_CORTEX_A7:
  	case KVM_ARM_TARGET_CORTEX_A15:
- 		if (vcpu->vcpu_id > cortexa_max_cpu_idx)
- 			return -EINVAL;
 -		cpu_reset = &cortexa_regs_reset;
 +		reset_regs = &cortexa_regs_reset;
  		vcpu->arch.midr = read_cpuid_id();
  		cpu_vtimer_irq = &cortexa_vtimer_irq;
  		break;

Re: linux-next: manual merge of the kvm-arm tree

[Marc Zyngier]

On 25/10/13 14:03, Thierry Reding wrote:
> Today's linux-next merge of the kvm-arm tree got a conflict in
> 
> 	arch/arm/kvm/reset.c
> 
> caused by commits e8c2d99 (KVM: ARM: Add support for Cortex-A7) and 7999b4d
> (ARM: KVM: drop limitation to 4 CPU VMs).
> 
> I fixed it up (see below). Please verify that the resolution looks good.

Looks good. Thanks Thierry.

	M.

> Thanks,
> Thierry
> ---
> diff --cc arch/arm/kvm/reset.c
> index d153e64,2c5add0..f558c07
> --- a/arch/arm/kvm/reset.c
> +++ b/arch/arm/kvm/reset.c
> @@@ -64,9 -62,7 +62,7 @@@ int kvm_reset_vcpu(struct kvm_vcpu *vcp
>   	switch (vcpu->arch.target) {
>   	case KVM_ARM_TARGET_CORTEX_A7:
>   	case KVM_ARM_TARGET_CORTEX_A15:
> - 		if (vcpu->vcpu_id > cortexa_max_cpu_idx)
> - 			return -EINVAL;
>  -		cpu_reset = &cortexa_regs_reset;
>  +		reset_regs = &cortexa_regs_reset;
>   		vcpu->arch.midr = read_cpuid_id();
>   		cpu_vtimer_irq = &cortexa_vtimer_irq;
>   		break;
> 


-- 
Jazz is not dead. It just smells funny...

linux-next: manual merge of the imx-mxs tree

[Thierry Reding]

Today's linux-next merge of the imx-mxs tree got a conflict in

	arch/arm/mach-imx/mach-imx6q.c

caused by commits 6aec339 (PM / OPP: rename header to linux/pm_opp.h) and
0794410 (imx: add PCI fixup for PEX860X on Gateworks board).

I fixed it up (see below). Please verify that the resolution looks good.

Thanks,
Thierry
---
diff --cc arch/arm/mach-imx/mach-imx6q.c
index eae5642,1ac719d..bc98799
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@@ -23,8 -23,9 +23,10 @@@
  #include <linux/of_address.h>
  #include <linux/of_irq.h>
  #include <linux/of_platform.h>
- #include <linux/pm_opp.h>
+ #include <linux/opp.h>
+ #include <linux/pci.h>
  #include <linux/phy.h>
++#include <linux/pm_opp.h>
  #include <linux/reboot.h>
  #include <linux/regmap.h>
  #include <linux/micrel_phy.h>

Re: linux-next: manual merge of the c6x tree

[Mark Salter]

On Fri, 2013-10-25 at 15:03 +0200, Thierry Reding wrote:
> Today's linux-next merge of the c6x tree got a conflict in
> 
> 	arch/arm/Kconfig
> 
> caused by commits 148104c (ARM: 7854/1: lockref: add support for lockless
> lockrefs using cmpxchg64) and commit d701884 (arm: select
> ARCH_MIGHT_HAVE_PC_PARPORT).
> 
> I fixed it up (see below). Please verify that the resolution looks good.

> Thanks,
> Thierry
> ---
> diff --cc arch/arm/Kconfig
> index c06647d,7db8abe0..b6a708e
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@@ -5,7 -5,7 +5,8 @@@ config AR
>   	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
>   	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
>   	select ARCH_HAVE_CUSTOM_GPIO_H
>  +	select ARCH_USE_CMPXCHG_LOCKREF
> + 	select ARCH_MIGHT_HAVE_PC_PARPORT
>   	select ARCH_WANT_IPC_PARSE_VERSION
>   	select BUILDTIME_EXTABLE_SORT if MMU
>   	select CLONE_BACKWARDS

ARCH_USE_CMPXCHG_LOCKREF needs to come after ARCH_MIGHT_HAVE_PC_PARPORT
to keep things sorted alphabetically. Other than that, its fine.

--Mark

Re: linux-next: manual merge of the c6x tree

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1375 bytes --]

On Fri, Oct 25, 2013 at 09:22:57AM -0400, Mark Salter wrote:
> On Fri, 2013-10-25 at 15:03 +0200, Thierry Reding wrote:
> > Today's linux-next merge of the c6x tree got a conflict in
> > 
> > 	arch/arm/Kconfig
> > 
> > caused by commits 148104c (ARM: 7854/1: lockref: add support for lockless
> > lockrefs using cmpxchg64) and commit d701884 (arm: select
> > ARCH_MIGHT_HAVE_PC_PARPORT).
> > 
> > I fixed it up (see below). Please verify that the resolution looks good.
> 
> > Thanks,
> > Thierry
> > ---
> > diff --cc arch/arm/Kconfig
> > index c06647d,7db8abe0..b6a708e
> > --- a/arch/arm/Kconfig
> > +++ b/arch/arm/Kconfig
> > @@@ -5,7 -5,7 +5,8 @@@ config AR
> >   	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
> >   	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
> >   	select ARCH_HAVE_CUSTOM_GPIO_H
> >  +	select ARCH_USE_CMPXCHG_LOCKREF
> > + 	select ARCH_MIGHT_HAVE_PC_PARPORT
> >   	select ARCH_WANT_IPC_PARSE_VERSION
> >   	select BUILDTIME_EXTABLE_SORT if MMU
> >   	select CLONE_BACKWARDS
> 
> ARCH_USE_CMPXCHG_LOCKREF needs to come after ARCH_MIGHT_HAVE_PC_PARPORT
> to keep things sorted alphabetically. Other than that, its fine.

Right, I missed that. Will keep it in mind, although I guess today will
be my last tree for a while since Stephen mentioned that he would
probably take over on Monday.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]

Re: linux-next: manual merge of the c6x tree

[Russell King - ARM Linux]

On Fri, Oct 25, 2013 at 03:03:39PM +0200, Thierry Reding wrote:
> diff --cc arch/arm/Kconfig
> index c06647d,7db8abe0..b6a708e
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@@ -5,7 -5,7 +5,8 @@@ config AR
>   	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
>   	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
>   	select ARCH_HAVE_CUSTOM_GPIO_H
>  +	select ARCH_USE_CMPXCHG_LOCKREF
> + 	select ARCH_MIGHT_HAVE_PC_PARPORT
>   	select ARCH_WANT_IPC_PARSE_VERSION

Thanks.  Generally we want these things to be arranged alphabetically to
reduce the longer term chances of hitting merge conflicts, but in this
case it wouldn't make any difference.

Re: linux-next: manual merge of the c6x tree

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 871 bytes --]

On Sat, Oct 26, 2013 at 02:19:38PM +0100, Russell King - ARM Linux wrote:
> On Fri, Oct 25, 2013 at 03:03:39PM +0200, Thierry Reding wrote:
> > diff --cc arch/arm/Kconfig
> > index c06647d,7db8abe0..b6a708e
> > --- a/arch/arm/Kconfig
> > +++ b/arch/arm/Kconfig
> > @@@ -5,7 -5,7 +5,8 @@@ config AR
> >   	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
> >   	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
> >   	select ARCH_HAVE_CUSTOM_GPIO_H
> >  +	select ARCH_USE_CMPXCHG_LOCKREF
> > + 	select ARCH_MIGHT_HAVE_PC_PARPORT
> >   	select ARCH_WANT_IPC_PARSE_VERSION
> 
> Thanks.  Generally we want these things to be arranged alphabetically to
> reduce the longer term chances of hitting merge conflicts, but in this
> case it wouldn't make any difference.

I was aiming for alphabetical order... guess I need to revisit my ABCs.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]