Hi Greg,

Today's linux-next merge of the staging tree got a conflict in
drivers/staging/ipack/devices/ipoctal.c between commit 734cc1783816
("TTY: use tty_port_register_device") from the tty tree and commit
2afb41d9d30d ("Staging: ipack/devices/ipoctal: Check tty_register_device
return value") from the staging tree.

I fixed it up (I think - see below) and can carry the fix as necessary
(no action is required).

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au

diff --cc drivers/staging/ipack/devices/ipoctal.c
index a68d981,0292364..0000000
--- a/drivers/staging/ipack/devices/ipoctal.c
+++ b/drivers/staging/ipack/devices/ipoctal.c
@@@ -490,19 -417,27 +417,27 @@@ static int ipoctal_inst_slot(struct ipo
  	ipoctal->tty_drv = tty;
  
  	for (i = 0; i < NR_CHANNELS; i++) {
- 		tty_port_init(&ipoctal->tty_port[i]);
- 		tty_port_alloc_xmit_buf(&ipoctal->tty_port[i]);
- 		ipoctal->tty_port[i].ops = &ipoctal_tty_port_ops;
- 
- 		ipoctal_reset_stats(&ipoctal->chan_stats[i]);
- 		ipoctal->nb_bytes[i] = 0;
- 		init_waitqueue_head(&ipoctal->queue[i]);
- 
- 		spin_lock_init(&ipoctal->lock[i]);
- 		ipoctal->pointer_read[i] = 0;
- 		ipoctal->pointer_write[i] = 0;
- 		ipoctal->nb_bytes[i] = 0;
- 		tty_port_register_device(&ipoctal->tty_port[i], tty, i, NULL);
+ 		struct device *tty_dev;
+ 
+ 		channel = &ipoctal->channel[i];
+ 		tty_port_init(&channel->tty_port);
+ 		tty_port_alloc_xmit_buf(&channel->tty_port);
+ 		channel->tty_port.ops = &ipoctal_tty_port_ops;
+ 
+ 		ipoctal_reset_stats(&channel->stats);
+ 		channel->nb_bytes = 0;
+ 		init_waitqueue_head(&channel->queue);
+ 
+ 		spin_lock_init(&channel->lock);
+ 		channel->pointer_read = 0;
+ 		channel->pointer_write = 0;
+ 		channel->nb_bytes = 0;
 -		tty_dev = tty_register_device(tty, i, NULL);
++		tty_dev = tty_port_register_device(&channel->tty_port, tty, i, NULL);
+ 		if (IS_ERR(tty_dev)) {
+ 			dev_err(&ipoctal->dev->dev, "Failed to register tty device.\n");
+ 			continue;
+ 		}
+ 		dev_set_drvdata(tty_dev, channel);
  
  		/*
  		 * Enable again the RX. TX will be enabled when
@@@ -613,23 -529,17 +529,17 @@@ static void ipoctal_set_termios(struct 
  	unsigned char mr1 = 0;
  	unsigned char mr2 = 0;
  	unsigned char csr = 0;
- 	unsigned int channel = tty->index;
- 	struct ipoctal *ipoctal = tty->driver_data;
+ 	struct ipoctal_channel *channel = tty->driver_data;
  	speed_t baud;
  
 -	cflag = tty->termios->c_cflag;
 +	cflag = tty->termios.c_cflag;
  
  	/* Disable and reset everything before change the setup */
- 	ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
- 			     CR_DISABLE_RX | CR_DISABLE_TX);
- 	ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
- 			     CR_CMD_RESET_RX);
- 	ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
- 			     CR_CMD_RESET_TX);
- 	ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
- 			     CR_CMD_RESET_ERR_STATUS);
- 	ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
- 			     CR_CMD_RESET_MR);
+ 	iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr);
+ 	iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr);
+ 	iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr);
+ 	iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr);
+ 	iowrite8(CR_CMD_RESET_MR, &channel->regs->w.cr);
  
  	/* Set Bits per chars */
  	switch (cflag & CSIZE) {