Hi Samuel,

Today's linux-next merge of the mfd tree got a conflict in
drivers/regulator/anatop-regulator.c between commit 3e2a928472da
("regulator: anatop: Fix wrong mask used in anatop_get_voltage_sel") from
Linus' tree and commit baa64151aecc ("regulator: anatop-regulator:
Convert to use syscon to access anatop register") from the mfd tree.

I fixed it up (see below) and can carry the fix as necessary (no action
is required).

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au

diff --cc drivers/regulator/anatop-regulator.c
index ce0fe72,596535d..0000000
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@@ -61,18 -64,17 +64,18 @@@ static int anatop_regmap_set_voltage_se
  	return 0;
  }
  
- static int anatop_get_voltage_sel(struct regulator_dev *reg)
+ static int anatop_regmap_get_voltage_sel(struct regulator_dev *reg)
  {
  	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
 -	u32 val;
 +	u32 val, mask;
  
  	if (!anatop_reg->control_reg)
  		return -ENOTSUPP;
  
- 	val = anatop_read_reg(anatop_reg->mfd, anatop_reg->control_reg);
+ 	regmap_read(anatop_reg->anatop, anatop_reg->control_reg, &val);
 -	val = (val & ((1 << anatop_reg->vol_bit_width) - 1)) >>
 +	mask = ((1 << anatop_reg->vol_bit_width) - 1) <<
  		anatop_reg->vol_bit_shift;
 +	val = (val & mask) >> anatop_reg->vol_bit_shift;
  
  	return val - anatop_reg->min_bit_val;
  }