Hi,

On Wed, Mar 20, 2013 at 10:39:11AM -0600, Stephen Warren wrote:
> On 03/20/2013 06:20 AM, Felipe Balbi wrote:
> > Hi,
> > 
> > On Tue, Mar 19, 2013 at 10:29:05AM -0600, Stephen Warren wrote:
> >> I see the following Kconfig warnings in next-20130319:
> >> 
> >>> warning: (ARCH_TEGRA_2x_SOC && ARCH_TEGRA_3x_SOC) selects
> >>> USB_ULPI which has unmet direct dependencies (USB_SUPPORT &&
> >>> USB_PHY && ARM) warning: (ARCH_TEGRA_2x_SOC &&
> >>> ARCH_TEGRA_3x_SOC) selects USB_ULPI_VIEWPORT which has unmet
> >>> direct dependencies (USB_SUPPORT && USB_PHY && USB_ULPI) 
> >>> include/config/auto.conf:624:warning: override:
> >>> ARCH_MULTIPLATFORM changes choice state warning:
> >>> (ARCH_TEGRA_2x_SOC && ARCH_TEGRA_3x_SOC) selects USB_ULPI which
> >>> has unmet direct dependencies (USB_SUPPORT && USB_PHY && ARM) 
> >>> warning: (ARCH_TEGRA_2x_SOC && ARCH_TEGRA_3x_SOC) selects
> >>> USB_ULPI_VIEWPORT which has unmet direct dependencies
> >>> (USB_SUPPORT && USB_PHY && USB_ULPI)
> >> 
> >> Which I believe are the cause of the following build errors:
> >> 
> >>> drivers/built-in.o: In function `controller_resume': 
> >>> drivers/usb/host/ehci-tegra.c:556: undefined reference to
> >>> `tegra_usb_phy_preresume' drivers/usb/host/ehci-tegra.c:479:
> >>> undefined reference to `tegra_ehci_phy_restore_start' 
> >>> drivers/usb/host/ehci-tegra.c:551: undefined reference to
> >>> `tegra_ehci_phy_restore_end' drivers/usb/host/ehci-tegra.c:546:
> >>> undefined reference to `tegra_ehci_phy_restore_end' 
> >>> drivers/built-in.o: In function `tegra_ehci_probe': 
> >>> drivers/usb/host/ehci-tegra.c:734: undefined reference to
> >>> `tegra_usb_phy_open' drivers/built-in.o: In function
> >>> `tegra_ehci_hub_control': drivers/usb/host/ehci-tegra.c:162:
> >>> undefined reference to `tegra_usb_phy_postresume' 
> >>> drivers/usb/host/ehci-tegra.c:215: undefined reference to
> >>> `tegra_usb_phy_preresume' make: *** [vmlinux] Error 1
> >> 
> >> I pointed out at least the Kconfig problems when you posted the
> >> PHY error handling cleanup series, so I'm not sure why those
> >> patches were applied.
> > 
> > Because tegra EHCI shouldn't be selecting the PHY and you didn't
> > even have a proper PHY driver. Try patch below:
> 
> I understand that, but applying the patches without that resolved
> still seems wrong. Just because something is currently sub-optimal
> doesn't mean it should get broken.
> 
> The patch you gave fixes the Kconfig warnings, but not the build failure.
> 
> The issue is that: tegra_defconfig enables CONFIG_USB_EHCI_TEGRA, but
> not CONFIG_USB_PHY since it's new. ehci-tegra.c directly calls
> functions exported by phy-tegra-usb.c. However, phy-tegra-usb.c
> doesn't get built, since drivers/usb/Makefile adds phy/ to
> obj-$(CONFIG_USB_PHY), so doesn't end up "recursing" into the
> sub-directory at all. drivers/usb/phy/Makefile contains:
> obj-$(CONFIG_USB_EHCI_TEGRA)+= phy-tegra-usb.o which used to couple
> the two builds together, in the absence of this new change that limits
> the building of phy/.
> 
> For now, I think the correct solution is to have USB_EHCI_TEGRA select
> USB_PHY. I validated that solves the build problem, and has the bonus
> of not needing any changes to tegra_defconfig.
>
> In the series that converts phy-usb-tegra.c to a real driver, we can
> give it its own Kconfig option, and have USB_EHCI_TEGRA depend on
> that, if you want. We'll then also need to take a patch through the
> Tegra tree to update tegra_defconfig.

Alright, do you want to send that patch ? My bad that I missed that
build error...

-- 
balbi