Hi all,

Today's linux-next merge of the arm-soc tree got a conflict in
arch/arm/boot/dts/at91sam9x5.dtsi between commits d50f88a0c304 ("ARM:
dts: add spi nodes for atmel SoC") and a68b728f7a21 ("ARM: dts: add
pinctrl property for spi node for atmel SoC") from the spi-mb tree and
commits e9a72ee81d58 ("ARM: at91: dt: at91sam9x5: add i2c pinctrl"),
463c9c7bf1f3 ("ARM: at91: dt: at91sam9x5: add i2c-gpio pinctrl") and
b909c6c94462 ("ARM: at91/at91sam9x5: add RTC node") from the arm-soc tree.

I fixed it up (hopefully - see below) and can carry the fix as necessary
(no action is required).

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au

diff --cc arch/arm/boot/dts/at91sam9x5.dtsi
index 347b438,284bf24..0000000
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@@ -343,23 -343,53 +343,70 @@@
  					};
  				};
  
 +				spi0 {
 +					pinctrl_spi0: spi0-0 {
 +						atmel,pins =
 +							<0 11 0x1 0x0	/* PA11 periph A SPI0_MISO pin */
 +							 0 12 0x1 0x0	/* PA12 periph A SPI0_MOSI pin */
 +							 0 13 0x1 0x0>;	/* PA13 periph A SPI0_SPCK pin */
 +					};
 +				};
 +
 +				spi1 {
 +					pinctrl_spi1: spi1-0 {
 +						atmel,pins =
 +							<0 21 0x2 0x0	/* PA21 periph B SPI1_MISO pin */
 +							 0 22 0x2 0x0	/* PA22 periph B SPI1_MOSI pin */
 +							 0 23 0x2 0x0>;	/* PA23 periph B SPI1_SPCK pin */
 +					};
 +				};
+ 				i2c0 {
+ 					pinctrl_i2c0: i2c0-0 {
+ 						atmel,pins =
+ 							<0 30 0x1 0x0	/* PA30 periph A I2C0 data */
+ 							 0 31 0x1 0x0>;	/* PA31 periph A I2C0 clock */
+ 					};
+ 				};
+ 
+ 				i2c1 {
+ 					pinctrl_i2c1: i2c1-0 {
+ 						atmel,pins =
+ 							<2 0 0x3 0x0	/* PC0 periph C I2C1 data */
+ 							 2 1 0x3 0x0>;	/* PC1 periph C I2C1 clock */
+ 					};
+ 				};
+ 
+ 				i2c2 {
+ 					pinctrl_i2c2: i2c2-0 {
+ 						atmel,pins =
+ 							<1 4 0x2 0x0	/* PB4 periph B I2C2 data */
+ 							 1 5 0x2 0x0>;	/* PB5 periph B I2C2 clock */
+ 					};
+ 				};
+ 
+ 				i2c_gpio0 {
+ 					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+ 						atmel,pins =
+ 							<0 30 0x0 0x2	/* PA30 gpio multidrive I2C0 data */
+ 							 0 31 0x0 0x2>;	/* PA31 gpio multidrive I2C0 clock */
+ 					};
+ 				};
+ 
+ 				i2c_gpio1 {
+ 					pinctrl_i2c_gpio1: i2c_gpio1-0 {
+ 						atmel,pins =
+ 							<2 0 0x0 0x2	/* PC0 gpio multidrive I2C1 data */
+ 							 2 1 0x0 0x2>;	/* PC1 gpio multidrive I2C1 clock */
+ 					};
+ 				};
+ 
+ 				i2c_gpio2 {
+ 					pinctrl_i2c_gpio2: i2c_gpio2-0 {
+ 						atmel,pins =
+ 							<1 4 0x0 0x2	/* PB4 gpio multidrive I2C2 data */
+ 							 1 5 0x0 0x2>;	/* PB5 gpio multidrive I2C2 clock */
+ 					};
+ 				};
  
  				pioA: gpio@fffff400 {
  					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
@@@ -548,27 -587,12 +604,33 @@@
  				};
  			};
  
 +			spi0: spi@f0000000 {
 +				#address-cells = <1>;
 +				#size-cells = <0>;
 +				compatible = "atmel,at91rm9200-spi";
 +				reg = <0xf0000000 0x100>;
 +				interrupts = <13 4 3>;
 +				pinctrl-names = "default";
 +				pinctrl-0 = <&pinctrl_spi0>;
 +				status = "disabled";
 +			};
 +
 +			spi1: spi@f0004000 {
 +				#address-cells = <1>;
 +				#size-cells = <0>;
 +				compatible = "atmel,at91rm9200-spi";
 +				reg = <0xf0004000 0x100>;
 +				interrupts = <14 4 3>;
 +				pinctrl-names = "default";
 +				pinctrl-0 = <&pinctrl_spi1>;
 +				status = "disabled";
 +			};
+ 			rtc@fffffeb0 {
+ 				compatible = "atmel,at91rm9200-rtc";
+ 				reg = <0xfffffeb0 0x40>;
+ 				interrupts = <1 4 7>;
+ 				status = "disabled";
+ 			};
  		};
  
  		nand0: nand@40000000 {