linux-next: manual merge of the arm-soc tree with the arm tree

[Stephen Rothwell <sfr@canb.auug.org.au>]

[-- Attachment #1: Type: text/plain, Size: 5400 bytes --]

Hi all,

Today's linux-next merge of the arm-soc tree got a conflict in
arch/arm/Kconfig.debug between commits 0889a9e35bd3 ("ARM: 8142/1:
ks8695: Migrate debug_ll macros to shared directory"), e38c399ca584
("ARM: 8144/2: netx: Migrate DEBUG_LL macros to shared directory"),
6741cacfa3f1 ("ARM: 8145/1: sa1100: Migrate DEBUG_LL macros to shared
directory") and debf843bf7ee ("ARM: 8146/1: Seperate DEBUG_UART_PHYS
from DEBUG_LL on EP93XX") from the arm tree and commits d8a00916b303
("ARM: meson: debug: add debug UART for earlyprintk support"),
b125170a39ea ("CNS3xxx: Fix debug UART") and b51312bebfa4 ("ARM:
BCM63XX: add low-level UART debug support") from the arm-soc tree.

I fixed it up (hopefully - see below) and can carry the fix as
necessary (no action is required).

You may be able to clean some of this up by using intermediate config
symbols that are selected by the low level symbols and depended upon by
the higher level config symbols.

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au

diff --cc arch/arm/Kconfig.debug
index 4fcff7737dd1,0d714e10f0a2..000000000000
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@@ -348,13 -365,13 +365,20 @@@ choic
  		  Say Y here if you want the debug print routines to direct
  		  their output to UART1 serial port on KEYSTONE2 devices.
  
 +	config DEBUG_KS8695_UART
 +		bool "KS8695 Debug UART"
 +		depends on ARCH_KS8695
 +		help
 +		  Say Y here if you want kernel low-level debugging support
 +		  on KS8695.
 +
+ 	config DEBUG_MESON_UARTAO
+ 		bool "Kernel low-level debugging via Meson6 UARTAO"
+ 		depends on ARCH_MESON
+ 		help
+ 		  Say Y here if you want kernel low-lever debugging support
+ 		  on Amlogic Meson6 based platforms on the UARTAO.
+ 
  	config DEBUG_MMP_UART2
  		bool "Kernel low-level debugging message via MMP UART2"
  		depends on ARCH_MMP
@@@ -1136,9 -1091,12 +1170,13 @@@ config DEBUG_UART_825
  		ARCH_IOP33X || ARCH_IXP4XX || \
  		ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
  
+ # Compatibility options for BCM63xx
+ config DEBUG_UART_BCM63XX
+ 	def_bool ARCH_BCM_63XX
+ 
  config DEBUG_UART_PHYS
  	hex "Physical base address of debug UART"
 +	default 0x00100a00 if DEBUG_NETX_UART
  	default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
  	default 0x01c28000 if DEBUG_SUNXI_UART0
  	default 0x01c28400 if DEBUG_SUNXI_UART1
@@@ -1174,9 -1133,7 +1213,10 @@@
  	default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
  				DEBUG_S3C2410_UART2)
  	default 0x7c0003f8 if FOOTBRIDGE
 +	default 0x80010000 if DEBUG_SA1100_UART1
 +	default 0x80030000 if DEBUG_SA1100_UART2
 +	default 0x80050000 if DEBUG_SA1100_UART3
+ 	default 0x78000000 if DEBUG_CNS3XXX
  	default 0x80070000 if DEBUG_IMX23_UART
  	default 0x80074000 if DEBUG_IMX28_UART
  	default 0x80230000 if DEBUG_PICOXCELL_UART
@@@ -1204,17 -1163,14 +1246,18 @@@
  	default 0xff690000 if DEBUG_RK32_UART2
  	default 0xffc02000 if DEBUG_SOCFPGA_UART
  	default 0xffd82340 if ARCH_IOP13XX
 +	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
 +	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
 +	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
  	default 0xfff36000 if DEBUG_HIGHBANK_UART
+ 	default 0xfffe8600 if DEBUG_UART_BCM63XX
  	default 0xfffff700 if ARCH_IOP33X
  	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
  		DEBUG_LL_UART_EFM32 || \
- 		DEBUG_UART_8250 || DEBUG_UART_PL01X || \
+ 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
 -		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
 -		DEBUG_UART_BCM63XX
 +		DEBUG_MSM_UART || DEBUG_NETX_UART || DEBUG_QCOM_UARTDM || \
 +		DEBUG_S3C24XX_UART || DEBUG_SA1100_UART || \
- 		ARCH_EP93XX
++		ARCH_EP93XX || DEBUG_UART_BCM63XX
  
  config DEBUG_UART_VIRT
  	hex "Virtual base address of debug UART"
@@@ -1241,14 -1196,14 +1284,17 @@@
  	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
  				DEBUG_S3C2410_UART2)
  	default 0xf7fc9000 if DEBUG_BERLIN_UART
+ 	default 0xf8007000 if DEBUG_HIP04_UART
  	default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
 +	default 0xf8010000 if DEBUG_SA1100_UART1
 +	default 0xf8030000 if DEBUG_SA1100_UART2
 +	default 0xf8050000 if DEBUG_SA1100_UART3
  	default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
  	default 0xfa71e000 if DEBUG_QCOM_UARTDM
+ 	default 0xfb002000 if DEBUG_CNS3XXX
  	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
  	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
+ 	default 0xfcfe8600 if DEBUG_UART_BCM63XX
  	default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
  	default 0xfd000000 if ARCH_SPEAR13XX
  	default 0xfd012000 if ARCH_MV78XX0
@@@ -1288,9 -1241,9 +1335,9 @@@
  	default 0xff003000 if DEBUG_U300_UART
  	default DEBUG_UART_PHYS if !MMU
  	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
- 		DEBUG_UART_8250 || DEBUG_UART_PL01X || \
+ 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
 -		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
 -		DEBUG_UART_BCM63XX
 +		DEBUG_MSM_UART || DEBUG_NETX_UART || DEBUG_QCOM_UARTDM || \
- 		DEBUG_S3C24XX_UART || DEBUG_SA1100_UART
++		DEBUG_S3C24XX_UART || DEBUG_SA1100_UART || DEBUG_UART_BCM63XX
  
  config DEBUG_UART_8250_SHIFT
  	int "Register offset shift for the 8250 debug UART"

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]