Linux-Next Archive on lore.kernel.org
 help / color / Atom feed
From: Pratik Rajesh Sampat <psampat@linux.ibm.com>
To: linuxppc-dev@ozlabs.org, linux-next@vger.kernel.org,
	mpe@ellerman.id.au, svaidy@linux.ibm.com, ego@linux.vnet.ibm.com,
	premjha2@in.ibm.com, akshay.adiga@linux.vnet.ibm.com
Subject: [PATCH v1 3/3] powerpc/powernv: Parse device tree, population of SPR support
Date: Thu, 10 Oct 2019 17:28:43 +0530
Message-ID: <20191010115843.22283-4-psampat@linux.ibm.com> (raw)
In-Reply-To: <20191010115843.22283-1-psampat@linux.ibm.com>

Parse the device tree for nodes self-save, self-restore and populate
support for the preferred SPRs based what was advertised by the device
tree.

Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
---
 arch/powerpc/platforms/powernv/idle.c | 104 ++++++++++++++++++++++++++
 1 file changed, 104 insertions(+)

diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index f0dd377820c7..43ad0e543b84 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -1408,6 +1408,107 @@ static void __init pnv_probe_idle_states(void)
 		supported_cpuidle_states |= pnv_idle_states[i].flags;
 }
 
+/*
+ * Extracts and populates the self save or restore capabilities
+ * passed from the device tree node
+ */
+static int extract_save_restore_state_dt(struct device_node *np, int type)
+{
+	int nr_sprns = 0, i, bitmask_index;
+	int rc = 0;
+	u32 active = 0;
+	u64 *temp_u64;
+	u64 bit_pos;
+
+	if (of_property_read_u32(np, "active", &active)) {
+		pr_warn("opal: failed to find the active value for self save/restore node");
+		return -EINVAL;
+	}
+
+	if (!active) {
+		/*
+		 * if the feature is not active, strip the preferred_sprs from
+		 * that capability.
+		 */
+		if (type == SELF_RESTORE_TYPE) {
+			for (i = 0; i < nr_preferred_sprs; i++) {
+				preferred_sprs[i].supported_mode &=
+					~SELF_RESTORE_STRICT;
+			}
+		} else {
+			for (i = 0; i < nr_preferred_sprs; i++) {
+				preferred_sprs[i].supported_mode &=
+					~SELF_SAVE_STRICT;
+			}
+		}
+		return 0;
+	}
+	nr_sprns = of_property_count_u64_elems(np, "sprn-bitmask");
+	if (nr_sprns <= 0)
+		return rc;
+	temp_u64 = kcalloc(nr_sprns, sizeof(u64), GFP_KERNEL);
+	if (of_property_read_u64_array(np, "sprn-bitmask",
+				       temp_u64, nr_sprns)) {
+		pr_warn("cpuidle-powernv: failed to find registers in DT\n");
+		kfree(temp_u64);
+		return -EINVAL;
+	}
+	/*
+	 * Populate acknowledgment of support for the sprs in the global vector
+	 * gotten by the registers supplied by the firmware.
+	 * The registers are in a bitmask, bit index within
+	 * that specifies the SPR
+	 */
+	for (i = 0; i < nr_preferred_sprs; i++) {
+		bitmask_index = preferred_sprs[i].spr / 64;
+		bit_pos = preferred_sprs[i].spr % 64;
+		if ((temp_u64[bitmask_index] & (1UL << bit_pos)) == 0) {
+			if (type == SELF_RESTORE_TYPE)
+				preferred_sprs[i].supported_mode &=
+					~SELF_RESTORE_STRICT;
+			else
+				preferred_sprs[i].supported_mode &=
+					~SELF_SAVE_STRICT;
+			continue;
+		}
+		if (type == SELF_RESTORE_TYPE) {
+			preferred_sprs[i].supported_mode |=
+				SELF_RESTORE_STRICT;
+		} else {
+			preferred_sprs[i].supported_mode |=
+				SELF_SAVE_STRICT;
+		}
+	}
+
+	kfree(temp_u64);
+	return rc;
+}
+
+static int pnv_parse_deepstate_dt(void)
+{
+	struct device_node *np, *np1;
+	int rc = 0;
+
+	/* Self restore register population */
+	np = of_find_node_by_path("/ibm,opal/power-mgt/self-restore");
+	if (!np) {
+		pr_warn("opal: self restore Node not found");
+	} else {
+		rc = extract_save_restore_state_dt(np, SELF_RESTORE_TYPE);
+		if (rc != 0)
+			return rc;
+	}
+	/* Self save register population */
+	np1 = of_find_node_by_path("/ibm,opal/power-mgt/self-save");
+	if (!np1) {
+		pr_warn("opal: self save Node not found");
+		pr_warn("Legacy firmware. Assuming default self-restore support");
+	} else {
+		rc = extract_save_restore_state_dt(np1, SELF_SAVE_TYPE);
+	}
+	return rc;
+}
+
 /*
  * This function parses device-tree and populates all the information
  * into pnv_idle_states structure. It also sets up nr_pnv_idle_states
@@ -1556,6 +1657,9 @@ static int __init pnv_init_idle_states(void)
 		return rc;
 	pnv_probe_idle_states();
 
+	rc = pnv_parse_deepstate_dt();
+	if (rc)
+		return rc;
 	if (!cpu_has_feature(CPU_FTR_ARCH_300)) {
 		if (!(supported_cpuidle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
 			power7_fastsleep_workaround_entry = false;
-- 
2.21.0


      parent reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-10 11:58 [PATCH v1 0/3] Integrate support for Self save, determine support and preference for self save or restore Pratik Rajesh Sampat
2019-10-10 11:58 ` [PATCH v1 1/3] powerpc/powernv: Interface to define support and preference for a SPR Pratik Rajesh Sampat
2019-10-10 11:58 ` [PATCH v1 2/3] powerpc/powernv: Introduce Self save support Pratik Rajesh Sampat
2019-10-10 11:58 ` Pratik Rajesh Sampat [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191010115843.22283-4-psampat@linux.ibm.com \
    --to=psampat@linux.ibm.com \
    --cc=akshay.adiga@linux.vnet.ibm.com \
    --cc=ego@linux.vnet.ibm.com \
    --cc=linux-next@vger.kernel.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=premjha2@in.ibm.com \
    --cc=svaidy@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Next Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-next/0 linux-next/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-next linux-next/ https://lore.kernel.org/linux-next \
		linux-next@vger.kernel.org linux-next@archiver.kernel.org
	public-inbox-index linux-next

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-next


AGPL code for this site: git clone https://public-inbox.org/ public-inbox