* linux-next: manual merge of the bcon tree
@ 2013-09-30 11:26 Thierry Reding
2013-09-30 11:26 ` linux-next: manual merge of the block tree Thierry Reding
` (9 more replies)
0 siblings, 10 replies; 20+ messages in thread
From: Thierry Reding @ 2013-09-30 11:26 UTC (permalink / raw)
To: Joern Engel; +Cc: linux-next, linux-kernel
Today's linux-next merge of the bcon tree got conflicts in
drivers/block/Kconfig
kernel/printk.c
I fixed it up (see below). Please check if the resolution looks correct.
Thanks,
Thierry
---
diff --cc drivers/block/Kconfig
index 555aed0,06eb42f..4cd9323
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@@ -541,14 -544,10 +541,20 @@@ config BLK_DEV_RB
If unsure, say N.
+config BLK_DEV_RSXX
+ tristate "IBM Flash Adapter 900GB Full Height PCIe Device Driver"
+ depends on PCI
+ help
+ Device driver for IBM's high speed PCIe SSD
+ storage device: Flash Adapter 900GB Full Height.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rsxx.
+
+ config BLOCKCONSOLE
+ bool "Block device console logging support"
+ help
+ This enables logging to block devices.
+ See <file:Documentation/block/blockconsole.txt> for details.
+
endif # BLK_DEV
diff --cc drivers/block/Makefile
index f33b366,99c5c2e..08da80f
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@@ -40,9 -40,6 +40,10 @@@ obj-$(CONFIG_XEN_BLKDEV_BACKEND) += xen
obj-$(CONFIG_BLK_DEV_DRBD) += drbd/
obj-$(CONFIG_BLK_DEV_RBD) += rbd.o
obj-$(CONFIG_BLK_DEV_PCIESSD_MTIP32XX) += mtip32xx/
+ obj-$(CONFIG_BLOCKCONSOLE) += blockconsole.o
+obj-$(CONFIG_BLK_DEV_RSXX) += rsxx/
+
+nvme-y := nvme-core.o nvme-scsi.o
+skd-y := skd_main.o
swim_mod-y := swim.o swim_asm.o
diff --cc kernel/printk/printk.c
index b4e8500,0000000..1cba1ea
mode 100644,000000..100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@@ -1,2910 -1,0 +1,2911 @@@
+/*
+ * linux/kernel/printk.c
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * Modified to make sys_syslog() more flexible: added commands to
+ * return the last 4k of kernel messages, regardless of whether
+ * they've been read or not. Added option to suppress kernel printk's
+ * to the console. Added hook for sending the console messages
+ * elsewhere, in preparation for a serial line console (someday).
+ * Ted Ts'o, 2/11/93.
+ * Modified for sysctl support, 1/8/97, Chris Horn.
+ * Fixed SMP synchronization, 08/08/99, Manfred Spraul
+ * manfred@colorfullife.com
+ * Rewrote bits to get rid of console_lock
+ * 01Mar01 Andrew Morton
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/nmi.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h> /* For in_interrupt() */
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/security.h>
+#include <linux/bootmem.h>
+#include <linux/memblock.h>
+#include <linux/aio.h>
+#include <linux/syscalls.h>
+#include <linux/kexec.h>
+#include <linux/kdb.h>
+#include <linux/ratelimit.h>
+#include <linux/kmsg_dump.h>
+#include <linux/syslog.h>
+#include <linux/cpu.h>
+#include <linux/notifier.h>
+#include <linux/rculist.h>
+#include <linux/poll.h>
+#include <linux/irq_work.h>
+#include <linux/utsname.h>
+
+#include <asm/uaccess.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/printk.h>
+
+#include "console_cmdline.h"
+#include "braille.h"
+
+/* printk's without a loglevel use this.. */
+#define DEFAULT_MESSAGE_LOGLEVEL CONFIG_DEFAULT_MESSAGE_LOGLEVEL
+
+/* We show everything that is MORE important than this.. */
+#define MINIMUM_CONSOLE_LOGLEVEL 1 /* Minimum loglevel we let people use */
+#define DEFAULT_CONSOLE_LOGLEVEL 7 /* anything MORE serious than KERN_DEBUG */
+
+int console_printk[4] = {
+ DEFAULT_CONSOLE_LOGLEVEL, /* console_loglevel */
+ DEFAULT_MESSAGE_LOGLEVEL, /* default_message_loglevel */
+ MINIMUM_CONSOLE_LOGLEVEL, /* minimum_console_loglevel */
+ DEFAULT_CONSOLE_LOGLEVEL, /* default_console_loglevel */
+};
+
+/*
+ * Low level drivers may need that to know if they can schedule in
+ * their unblank() callback or not. So let's export it.
+ */
+int oops_in_progress;
+EXPORT_SYMBOL(oops_in_progress);
+
+/*
+ * console_sem protects the console_drivers list, and also
+ * provides serialisation for access to the entire console
+ * driver system.
+ */
+static DEFINE_SEMAPHORE(console_sem);
+struct console *console_drivers;
+EXPORT_SYMBOL_GPL(console_drivers);
+
+#ifdef CONFIG_LOCKDEP
+static struct lockdep_map console_lock_dep_map = {
+ .name = "console_lock"
+};
+#endif
+
+/*
+ * This is used for debugging the mess that is the VT code by
+ * keeping track if we have the console semaphore held. It's
+ * definitely not the perfect debug tool (we don't know if _WE_
+ * hold it are racing, but it helps tracking those weird code
+ * path in the console code where we end up in places I want
+ * locked without the console sempahore held
+ */
+static int console_locked, console_suspended;
+
+/*
+ * If exclusive_console is non-NULL then only this console is to be printed to.
+ */
+static struct console *exclusive_console;
+
+/*
+ * Array of consoles built from command line options (console=)
+ */
+
+#define MAX_CMDLINECONSOLES 8
+
+static struct console_cmdline console_cmdline[MAX_CMDLINECONSOLES];
+
+static int selected_console = -1;
+static int preferred_console = -1;
+int console_set_on_cmdline;
+EXPORT_SYMBOL(console_set_on_cmdline);
+
+/* Flag: console code may call schedule() */
+static int console_may_schedule;
+
+/*
+ * The printk log buffer consists of a chain of concatenated variable
+ * length records. Every record starts with a record header, containing
+ * the overall length of the record.
+ *
+ * The heads to the first and last entry in the buffer, as well as the
+ * sequence numbers of these both entries are maintained when messages
+ * are stored..
+ *
+ * If the heads indicate available messages, the length in the header
+ * tells the start next message. A length == 0 for the next message
+ * indicates a wrap-around to the beginning of the buffer.
+ *
+ * Every record carries the monotonic timestamp in microseconds, as well as
+ * the standard userspace syslog level and syslog facility. The usual
+ * kernel messages use LOG_KERN; userspace-injected messages always carry
+ * a matching syslog facility, by default LOG_USER. The origin of every
+ * message can be reliably determined that way.
+ *
+ * The human readable log message directly follows the message header. The
+ * length of the message text is stored in the header, the stored message
+ * is not terminated.
+ *
+ * Optionally, a message can carry a dictionary of properties (key/value pairs),
+ * to provide userspace with a machine-readable message context.
+ *
+ * Examples for well-defined, commonly used property names are:
+ * DEVICE=b12:8 device identifier
+ * b12:8 block dev_t
+ * c127:3 char dev_t
+ * n8 netdev ifindex
+ * +sound:card0 subsystem:devname
+ * SUBSYSTEM=pci driver-core subsystem name
+ *
+ * Valid characters in property names are [a-zA-Z0-9.-_]. The plain text value
+ * follows directly after a '=' character. Every property is terminated by
+ * a '\0' character. The last property is not terminated.
+ *
+ * Example of a message structure:
+ * 0000 ff 8f 00 00 00 00 00 00 monotonic time in nsec
+ * 0008 34 00 record is 52 bytes long
+ * 000a 0b 00 text is 11 bytes long
+ * 000c 1f 00 dictionary is 23 bytes long
+ * 000e 03 00 LOG_KERN (facility) LOG_ERR (level)
+ * 0010 69 74 27 73 20 61 20 6c "it's a l"
+ * 69 6e 65 "ine"
+ * 001b 44 45 56 49 43 "DEVIC"
+ * 45 3d 62 38 3a 32 00 44 "E=b8:2\0D"
+ * 52 49 56 45 52 3d 62 75 "RIVER=bu"
+ * 67 "g"
+ * 0032 00 00 00 padding to next message header
+ *
+ * The 'struct printk_log' buffer header must never be directly exported to
+ * userspace, it is a kernel-private implementation detail that might
+ * need to be changed in the future, when the requirements change.
+ *
+ * /dev/kmsg exports the structured data in the following line format:
+ * "level,sequnum,timestamp;<message text>\n"
+ *
+ * The optional key/value pairs are attached as continuation lines starting
+ * with a space character and terminated by a newline. All possible
+ * non-prinatable characters are escaped in the "\xff" notation.
+ *
+ * Users of the export format should ignore possible additional values
+ * separated by ',', and find the message after the ';' character.
+ */
+
+enum log_flags {
+ LOG_NOCONS = 1, /* already flushed, do not print to console */
+ LOG_NEWLINE = 2, /* text ended with a newline */
+ LOG_PREFIX = 4, /* text started with a prefix */
+ LOG_CONT = 8, /* text is a fragment of a continuation line */
+};
+
+struct printk_log {
+ u64 ts_nsec; /* timestamp in nanoseconds */
+ u16 len; /* length of entire record */
+ u16 text_len; /* length of text buffer */
+ u16 dict_len; /* length of dictionary buffer */
+ u8 facility; /* syslog facility */
+ u8 flags:5; /* internal record flags */
+ u8 level:3; /* syslog level */
+};
+
+/*
+ * The logbuf_lock protects kmsg buffer, indices, counters. It is also
+ * used in interesting ways to provide interlocking in console_unlock();
+ */
+static DEFINE_RAW_SPINLOCK(logbuf_lock);
+
+#ifdef CONFIG_PRINTK
+DECLARE_WAIT_QUEUE_HEAD(log_wait);
+/* the next printk record to read by syslog(READ) or /proc/kmsg */
+static u64 syslog_seq;
+static u32 syslog_idx;
+static enum log_flags syslog_prev;
+static size_t syslog_partial;
+
+/* index and sequence number of the first record stored in the buffer */
+static u64 log_first_seq;
+static u32 log_first_idx;
+
+/* index and sequence number of the next record to store in the buffer */
+static u64 log_next_seq;
+static u32 log_next_idx;
+
+/* the next printk record to write to the console */
+static u64 console_seq;
+static u32 console_idx;
+static enum log_flags console_prev;
+
+/* the next printk record to read after the last 'clear' command */
+static u64 clear_seq;
+static u32 clear_idx;
+
+#define PREFIX_MAX 32
+#define LOG_LINE_MAX 1024 - PREFIX_MAX
+
+/* record buffer */
+#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
+#define LOG_ALIGN 4
+#else
+#define LOG_ALIGN __alignof__(struct printk_log)
+#endif
+#define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT)
+static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN);
+static char *log_buf = __log_buf;
+static u32 log_buf_len = __LOG_BUF_LEN;
+
+/* cpu currently holding logbuf_lock */
+static volatile unsigned int logbuf_cpu = UINT_MAX;
+
+/* human readable text of the record */
+static char *log_text(const struct printk_log *msg)
+{
+ return (char *)msg + sizeof(struct printk_log);
+}
+
+/* optional key/value pair dictionary attached to the record */
+static char *log_dict(const struct printk_log *msg)
+{
+ return (char *)msg + sizeof(struct printk_log) + msg->text_len;
+}
+
+/* get record by index; idx must point to valid msg */
+static struct printk_log *log_from_idx(u32 idx)
+{
+ struct printk_log *msg = (struct printk_log *)(log_buf + idx);
+
+ /*
+ * A length == 0 record is the end of buffer marker. Wrap around and
+ * read the message at the start of the buffer.
+ */
+ if (!msg->len)
+ return (struct printk_log *)log_buf;
+ return msg;
+}
+
+/* get next record; idx must point to valid msg */
+static u32 log_next(u32 idx)
+{
+ struct printk_log *msg = (struct printk_log *)(log_buf + idx);
+
+ /* length == 0 indicates the end of the buffer; wrap */
+ /*
+ * A length == 0 record is the end of buffer marker. Wrap around and
+ * read the message at the start of the buffer as *this* one, and
+ * return the one after that.
+ */
+ if (!msg->len) {
+ msg = (struct printk_log *)log_buf;
+ return msg->len;
+ }
+ return idx + msg->len;
+}
+
+/* insert record into the buffer, discard old ones, update heads */
+static void log_store(int facility, int level,
+ enum log_flags flags, u64 ts_nsec,
+ const char *dict, u16 dict_len,
+ const char *text, u16 text_len)
+{
+ struct printk_log *msg;
+ u32 size, pad_len;
+
+ /* number of '\0' padding bytes to next message */
+ size = sizeof(struct printk_log) + text_len + dict_len;
+ pad_len = (-size) & (LOG_ALIGN - 1);
+ size += pad_len;
+
+ while (log_first_seq < log_next_seq) {
+ u32 free;
+
+ if (log_next_idx > log_first_idx)
+ free = max(log_buf_len - log_next_idx, log_first_idx);
+ else
+ free = log_first_idx - log_next_idx;
+
+ if (free > size + sizeof(struct printk_log))
+ break;
+
+ /* drop old messages until we have enough contiuous space */
+ log_first_idx = log_next(log_first_idx);
+ log_first_seq++;
+ }
+
+ if (log_next_idx + size + sizeof(struct printk_log) >= log_buf_len) {
+ /*
+ * This message + an additional empty header does not fit
+ * at the end of the buffer. Add an empty header with len == 0
+ * to signify a wrap around.
+ */
+ memset(log_buf + log_next_idx, 0, sizeof(struct printk_log));
+ log_next_idx = 0;
+ }
+
+ /* fill message */
+ msg = (struct printk_log *)(log_buf + log_next_idx);
+ memcpy(log_text(msg), text, text_len);
+ msg->text_len = text_len;
+ memcpy(log_dict(msg), dict, dict_len);
+ msg->dict_len = dict_len;
+ msg->facility = facility;
+ msg->level = level & 7;
+ msg->flags = flags & 0x1f;
+ if (ts_nsec > 0)
+ msg->ts_nsec = ts_nsec;
+ else
+ msg->ts_nsec = local_clock();
+ memset(log_dict(msg) + dict_len, 0, pad_len);
+ msg->len = sizeof(struct printk_log) + text_len + dict_len + pad_len;
+
+ /* insert message */
+ log_next_idx += msg->len;
+ log_next_seq++;
+}
+
+#ifdef CONFIG_SECURITY_DMESG_RESTRICT
+int dmesg_restrict = 1;
+#else
+int dmesg_restrict;
+#endif
+
+static int syslog_action_restricted(int type)
+{
+ if (dmesg_restrict)
+ return 1;
+ /*
+ * Unless restricted, we allow "read all" and "get buffer size"
+ * for everybody.
+ */
+ return type != SYSLOG_ACTION_READ_ALL &&
+ type != SYSLOG_ACTION_SIZE_BUFFER;
+}
+
+static int check_syslog_permissions(int type, bool from_file)
+{
+ /*
+ * If this is from /proc/kmsg and we've already opened it, then we've
+ * already done the capabilities checks at open time.
+ */
+ if (from_file && type != SYSLOG_ACTION_OPEN)
+ return 0;
+
+ if (syslog_action_restricted(type)) {
+ if (capable(CAP_SYSLOG))
+ return 0;
+ /*
+ * For historical reasons, accept CAP_SYS_ADMIN too, with
+ * a warning.
+ */
+ if (capable(CAP_SYS_ADMIN)) {
+ pr_warn_once("%s (%d): Attempt to access syslog with "
+ "CAP_SYS_ADMIN but no CAP_SYSLOG "
+ "(deprecated).\n",
+ current->comm, task_pid_nr(current));
+ return 0;
+ }
+ return -EPERM;
+ }
+ return security_syslog(type);
+}
+
+
+/* /dev/kmsg - userspace message inject/listen interface */
+struct devkmsg_user {
+ u64 seq;
+ u32 idx;
+ enum log_flags prev;
+ struct mutex lock;
+ char buf[8192];
+};
+
+static ssize_t devkmsg_writev(struct kiocb *iocb, const struct iovec *iv,
+ unsigned long count, loff_t pos)
+{
+ char *buf, *line;
+ int i;
+ int level = default_message_loglevel;
+ int facility = 1; /* LOG_USER */
+ size_t len = iov_length(iv, count);
+ ssize_t ret = len;
+
+ if (len > LOG_LINE_MAX)
+ return -EINVAL;
+ buf = kmalloc(len+1, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ line = buf;
+ for (i = 0; i < count; i++) {
+ if (copy_from_user(line, iv[i].iov_base, iv[i].iov_len)) {
+ ret = -EFAULT;
+ goto out;
+ }
+ line += iv[i].iov_len;
+ }
+
+ /*
+ * Extract and skip the syslog prefix <[0-9]*>. Coming from userspace
+ * the decimal value represents 32bit, the lower 3 bit are the log
+ * level, the rest are the log facility.
+ *
+ * If no prefix or no userspace facility is specified, we
+ * enforce LOG_USER, to be able to reliably distinguish
+ * kernel-generated messages from userspace-injected ones.
+ */
+ line = buf;
+ if (line[0] == '<') {
+ char *endp = NULL;
+
+ i = simple_strtoul(line+1, &endp, 10);
+ if (endp && endp[0] == '>') {
+ level = i & 7;
+ if (i >> 3)
+ facility = i >> 3;
+ endp++;
+ len -= endp - line;
+ line = endp;
+ }
+ }
+ line[len] = '\0';
+
+ printk_emit(facility, level, NULL, 0, "%s", line);
+out:
+ kfree(buf);
+ return ret;
+}
+
+static ssize_t devkmsg_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct devkmsg_user *user = file->private_data;
+ struct printk_log *msg;
+ u64 ts_usec;
+ size_t i;
+ char cont = '-';
+ size_t len;
+ ssize_t ret;
+
+ if (!user)
+ return -EBADF;
+
+ ret = mutex_lock_interruptible(&user->lock);
+ if (ret)
+ return ret;
+ raw_spin_lock_irq(&logbuf_lock);
+ while (user->seq == log_next_seq) {
+ if (file->f_flags & O_NONBLOCK) {
+ ret = -EAGAIN;
+ raw_spin_unlock_irq(&logbuf_lock);
+ goto out;
+ }
+
+ raw_spin_unlock_irq(&logbuf_lock);
+ ret = wait_event_interruptible(log_wait,
+ user->seq != log_next_seq);
+ if (ret)
+ goto out;
+ raw_spin_lock_irq(&logbuf_lock);
+ }
+
+ if (user->seq < log_first_seq) {
+ /* our last seen message is gone, return error and reset */
+ user->idx = log_first_idx;
+ user->seq = log_first_seq;
+ ret = -EPIPE;
+ raw_spin_unlock_irq(&logbuf_lock);
+ goto out;
+ }
+
+ msg = log_from_idx(user->idx);
+ ts_usec = msg->ts_nsec;
+ do_div(ts_usec, 1000);
+
+ /*
+ * If we couldn't merge continuation line fragments during the print,
+ * export the stored flags to allow an optional external merge of the
+ * records. Merging the records isn't always neccessarily correct, like
+ * when we hit a race during printing. In most cases though, it produces
+ * better readable output. 'c' in the record flags mark the first
+ * fragment of a line, '+' the following.
+ */
+ if (msg->flags & LOG_CONT && !(user->prev & LOG_CONT))
+ cont = 'c';
+ else if ((msg->flags & LOG_CONT) ||
+ ((user->prev & LOG_CONT) && !(msg->flags & LOG_PREFIX)))
+ cont = '+';
+
+ len = sprintf(user->buf, "%u,%llu,%llu,%c;",
+ (msg->facility << 3) | msg->level,
+ user->seq, ts_usec, cont);
+ user->prev = msg->flags;
+
+ /* escape non-printable characters */
+ for (i = 0; i < msg->text_len; i++) {
+ unsigned char c = log_text(msg)[i];
+
+ if (c < ' ' || c >= 127 || c == '\\')
+ len += sprintf(user->buf + len, "\\x%02x", c);
+ else
+ user->buf[len++] = c;
+ }
+ user->buf[len++] = '\n';
+
+ if (msg->dict_len) {
+ bool line = true;
+
+ for (i = 0; i < msg->dict_len; i++) {
+ unsigned char c = log_dict(msg)[i];
+
+ if (line) {
+ user->buf[len++] = ' ';
+ line = false;
+ }
+
+ if (c == '\0') {
+ user->buf[len++] = '\n';
+ line = true;
+ continue;
+ }
+
+ if (c < ' ' || c >= 127 || c == '\\') {
+ len += sprintf(user->buf + len, "\\x%02x", c);
+ continue;
+ }
+
+ user->buf[len++] = c;
+ }
+ user->buf[len++] = '\n';
+ }
+
+ user->idx = log_next(user->idx);
+ user->seq++;
+ raw_spin_unlock_irq(&logbuf_lock);
+
+ if (len > count) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (copy_to_user(buf, user->buf, len)) {
+ ret = -EFAULT;
+ goto out;
+ }
+ ret = len;
+out:
+ mutex_unlock(&user->lock);
+ return ret;
+}
+
+static loff_t devkmsg_llseek(struct file *file, loff_t offset, int whence)
+{
+ struct devkmsg_user *user = file->private_data;
+ loff_t ret = 0;
+
+ if (!user)
+ return -EBADF;
+ if (offset)
+ return -ESPIPE;
+
+ raw_spin_lock_irq(&logbuf_lock);
+ switch (whence) {
+ case SEEK_SET:
+ /* the first record */
+ user->idx = log_first_idx;
+ user->seq = log_first_seq;
+ break;
+ case SEEK_DATA:
+ /*
+ * The first record after the last SYSLOG_ACTION_CLEAR,
+ * like issued by 'dmesg -c'. Reading /dev/kmsg itself
+ * changes no global state, and does not clear anything.
+ */
+ user->idx = clear_idx;
+ user->seq = clear_seq;
+ break;
+ case SEEK_END:
+ /* after the last record */
+ user->idx = log_next_idx;
+ user->seq = log_next_seq;
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ raw_spin_unlock_irq(&logbuf_lock);
+ return ret;
+}
+
+static unsigned int devkmsg_poll(struct file *file, poll_table *wait)
+{
+ struct devkmsg_user *user = file->private_data;
+ int ret = 0;
+
+ if (!user)
+ return POLLERR|POLLNVAL;
+
+ poll_wait(file, &log_wait, wait);
+
+ raw_spin_lock_irq(&logbuf_lock);
+ if (user->seq < log_next_seq) {
+ /* return error when data has vanished underneath us */
+ if (user->seq < log_first_seq)
+ ret = POLLIN|POLLRDNORM|POLLERR|POLLPRI;
+ else
+ ret = POLLIN|POLLRDNORM;
+ }
+ raw_spin_unlock_irq(&logbuf_lock);
+
+ return ret;
+}
+
+static int devkmsg_open(struct inode *inode, struct file *file)
+{
+ struct devkmsg_user *user;
+ int err;
+
+ /* write-only does not need any file context */
+ if ((file->f_flags & O_ACCMODE) == O_WRONLY)
+ return 0;
+
+ err = check_syslog_permissions(SYSLOG_ACTION_READ_ALL,
+ SYSLOG_FROM_READER);
+ if (err)
+ return err;
+
+ user = kmalloc(sizeof(struct devkmsg_user), GFP_KERNEL);
+ if (!user)
+ return -ENOMEM;
+
+ mutex_init(&user->lock);
+
+ raw_spin_lock_irq(&logbuf_lock);
+ user->idx = log_first_idx;
+ user->seq = log_first_seq;
+ raw_spin_unlock_irq(&logbuf_lock);
+
+ file->private_data = user;
+ return 0;
+}
+
+static int devkmsg_release(struct inode *inode, struct file *file)
+{
+ struct devkmsg_user *user = file->private_data;
+
+ if (!user)
+ return 0;
+
+ mutex_destroy(&user->lock);
+ kfree(user);
+ return 0;
+}
+
+const struct file_operations kmsg_fops = {
+ .open = devkmsg_open,
+ .read = devkmsg_read,
+ .aio_write = devkmsg_writev,
+ .llseek = devkmsg_llseek,
+ .poll = devkmsg_poll,
+ .release = devkmsg_release,
+};
+
+#ifdef CONFIG_KEXEC
+/*
+ * This appends the listed symbols to /proc/vmcoreinfo
+ *
+ * /proc/vmcoreinfo is used by various utiilties, like crash and makedumpfile to
+ * obtain access to symbols that are otherwise very difficult to locate. These
+ * symbols are specifically used so that utilities can access and extract the
+ * dmesg log from a vmcore file after a crash.
+ */
+void log_buf_kexec_setup(void)
+{
+ VMCOREINFO_SYMBOL(log_buf);
+ VMCOREINFO_SYMBOL(log_buf_len);
+ VMCOREINFO_SYMBOL(log_first_idx);
+ VMCOREINFO_SYMBOL(log_next_idx);
+ /*
+ * Export struct printk_log size and field offsets. User space tools can
+ * parse it and detect any changes to structure down the line.
+ */
+ VMCOREINFO_STRUCT_SIZE(printk_log);
+ VMCOREINFO_OFFSET(printk_log, ts_nsec);
+ VMCOREINFO_OFFSET(printk_log, len);
+ VMCOREINFO_OFFSET(printk_log, text_len);
+ VMCOREINFO_OFFSET(printk_log, dict_len);
+}
+#endif
+
+/* requested log_buf_len from kernel cmdline */
+static unsigned long __initdata new_log_buf_len;
+
+/* save requested log_buf_len since it's too early to process it */
+static int __init log_buf_len_setup(char *str)
+{
+ unsigned size = memparse(str, &str);
+
+ if (size)
+ size = roundup_pow_of_two(size);
+ if (size > log_buf_len)
+ new_log_buf_len = size;
+
+ return 0;
+}
+early_param("log_buf_len", log_buf_len_setup);
+
+void __init setup_log_buf(int early)
+{
+ unsigned long flags;
+ char *new_log_buf;
+ int free;
+
+ if (!new_log_buf_len)
+ return;
+
+ if (early) {
+ unsigned long mem;
+
+ mem = memblock_alloc(new_log_buf_len, PAGE_SIZE);
+ if (!mem)
+ return;
+ new_log_buf = __va(mem);
+ } else {
+ new_log_buf = alloc_bootmem_nopanic(new_log_buf_len);
+ }
+
+ if (unlikely(!new_log_buf)) {
+ pr_err("log_buf_len: %ld bytes not available\n",
+ new_log_buf_len);
+ return;
+ }
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ log_buf_len = new_log_buf_len;
+ log_buf = new_log_buf;
+ new_log_buf_len = 0;
+ free = __LOG_BUF_LEN - log_next_idx;
+ memcpy(log_buf, __log_buf, __LOG_BUF_LEN);
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
+ pr_info("log_buf_len: %d\n", log_buf_len);
+ pr_info("early log buf free: %d(%d%%)\n",
+ free, (free * 100) / __LOG_BUF_LEN);
+}
+
+static bool __read_mostly ignore_loglevel;
+
+static int __init ignore_loglevel_setup(char *str)
+{
+ ignore_loglevel = 1;
+ printk(KERN_INFO "debug: ignoring loglevel setting.\n");
+
+ return 0;
+}
+
+early_param("ignore_loglevel", ignore_loglevel_setup);
+module_param(ignore_loglevel, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ignore_loglevel, "ignore loglevel setting, to"
+ "print all kernel messages to the console.");
+
+#ifdef CONFIG_BOOT_PRINTK_DELAY
+
+static int boot_delay; /* msecs delay after each printk during bootup */
+static unsigned long long loops_per_msec; /* based on boot_delay */
+
+static int __init boot_delay_setup(char *str)
+{
+ unsigned long lpj;
+
+ lpj = preset_lpj ? preset_lpj : 1000000; /* some guess */
+ loops_per_msec = (unsigned long long)lpj / 1000 * HZ;
+
+ get_option(&str, &boot_delay);
+ if (boot_delay > 10 * 1000)
+ boot_delay = 0;
+
+ pr_debug("boot_delay: %u, preset_lpj: %ld, lpj: %lu, "
+ "HZ: %d, loops_per_msec: %llu\n",
+ boot_delay, preset_lpj, lpj, HZ, loops_per_msec);
+ return 1;
+}
+__setup("boot_delay=", boot_delay_setup);
+
+static void boot_delay_msec(int level)
+{
+ unsigned long long k;
+ unsigned long timeout;
+
+ if ((boot_delay == 0 || system_state != SYSTEM_BOOTING)
+ || (level >= console_loglevel && !ignore_loglevel)) {
+ return;
+ }
+
+ k = (unsigned long long)loops_per_msec * boot_delay;
+
+ timeout = jiffies + msecs_to_jiffies(boot_delay);
+ while (k) {
+ k--;
+ cpu_relax();
+ /*
+ * use (volatile) jiffies to prevent
+ * compiler reduction; loop termination via jiffies
+ * is secondary and may or may not happen.
+ */
+ if (time_after(jiffies, timeout))
+ break;
+ touch_nmi_watchdog();
+ }
+}
+#else
+static inline void boot_delay_msec(int level)
+{
+}
+#endif
+
+#if defined(CONFIG_PRINTK_TIME)
+static bool printk_time = 1;
+#else
+static bool printk_time;
+#endif
+module_param_named(time, printk_time, bool, S_IRUGO | S_IWUSR);
+
+static size_t print_time(u64 ts, char *buf)
+{
+ unsigned long rem_nsec;
+
+ if (!printk_time)
+ return 0;
+
+ rem_nsec = do_div(ts, 1000000000);
+
+ if (!buf)
+ return snprintf(NULL, 0, "[%5lu.000000] ", (unsigned long)ts);
+
+ return sprintf(buf, "[%5lu.%06lu] ",
+ (unsigned long)ts, rem_nsec / 1000);
+}
+
+static size_t print_prefix(const struct printk_log *msg, bool syslog, char *buf)
+{
+ size_t len = 0;
+ unsigned int prefix = (msg->facility << 3) | msg->level;
+
+ if (syslog) {
+ if (buf) {
+ len += sprintf(buf, "<%u>", prefix);
+ } else {
+ len += 3;
+ if (prefix > 999)
+ len += 3;
+ else if (prefix > 99)
+ len += 2;
+ else if (prefix > 9)
+ len++;
+ }
+ }
+
+ len += print_time(msg->ts_nsec, buf ? buf + len : NULL);
+ return len;
+}
+
+static size_t msg_print_text(const struct printk_log *msg, enum log_flags prev,
+ bool syslog, char *buf, size_t size)
+{
+ const char *text = log_text(msg);
+ size_t text_size = msg->text_len;
+ bool prefix = true;
+ bool newline = true;
+ size_t len = 0;
+
+ if ((prev & LOG_CONT) && !(msg->flags & LOG_PREFIX))
+ prefix = false;
+
+ if (msg->flags & LOG_CONT) {
+ if ((prev & LOG_CONT) && !(prev & LOG_NEWLINE))
+ prefix = false;
+
+ if (!(msg->flags & LOG_NEWLINE))
+ newline = false;
+ }
+
+ do {
+ const char *next = memchr(text, '\n', text_size);
+ size_t text_len;
+
+ if (next) {
+ text_len = next - text;
+ next++;
+ text_size -= next - text;
+ } else {
+ text_len = text_size;
+ }
+
+ if (buf) {
+ if (print_prefix(msg, syslog, NULL) +
+ text_len + 1 >= size - len)
+ break;
+
+ if (prefix)
+ len += print_prefix(msg, syslog, buf + len);
+ memcpy(buf + len, text, text_len);
+ len += text_len;
+ if (next || newline)
+ buf[len++] = '\n';
+ } else {
+ /* SYSLOG_ACTION_* buffer size only calculation */
+ if (prefix)
+ len += print_prefix(msg, syslog, NULL);
+ len += text_len;
+ if (next || newline)
+ len++;
+ }
+
+ prefix = true;
+ text = next;
+ } while (text);
+
+ return len;
+}
+
+static int syslog_print(char __user *buf, int size)
+{
+ char *text;
+ struct printk_log *msg;
+ int len = 0;
+
+ text = kmalloc(LOG_LINE_MAX + PREFIX_MAX, GFP_KERNEL);
+ if (!text)
+ return -ENOMEM;
+
+ while (size > 0) {
+ size_t n;
+ size_t skip;
+
+ raw_spin_lock_irq(&logbuf_lock);
+ if (syslog_seq < log_first_seq) {
+ /* messages are gone, move to first one */
+ syslog_seq = log_first_seq;
+ syslog_idx = log_first_idx;
+ syslog_prev = 0;
+ syslog_partial = 0;
+ }
+ if (syslog_seq == log_next_seq) {
+ raw_spin_unlock_irq(&logbuf_lock);
+ break;
+ }
+
+ skip = syslog_partial;
+ msg = log_from_idx(syslog_idx);
+ n = msg_print_text(msg, syslog_prev, true, text,
+ LOG_LINE_MAX + PREFIX_MAX);
+ if (n - syslog_partial <= size) {
+ /* message fits into buffer, move forward */
+ syslog_idx = log_next(syslog_idx);
+ syslog_seq++;
+ syslog_prev = msg->flags;
+ n -= syslog_partial;
+ syslog_partial = 0;
+ } else if (!len){
+ /* partial read(), remember position */
+ n = size;
+ syslog_partial += n;
+ } else
+ n = 0;
+ raw_spin_unlock_irq(&logbuf_lock);
+
+ if (!n)
+ break;
+
+ if (copy_to_user(buf, text + skip, n)) {
+ if (!len)
+ len = -EFAULT;
+ break;
+ }
+
+ len += n;
+ size -= n;
+ buf += n;
+ }
+
+ kfree(text);
+ return len;
+}
+
+static int syslog_print_all(char __user *buf, int size, bool clear)
+{
+ char *text;
+ int len = 0;
+
+ text = kmalloc(LOG_LINE_MAX + PREFIX_MAX, GFP_KERNEL);
+ if (!text)
+ return -ENOMEM;
+
+ raw_spin_lock_irq(&logbuf_lock);
+ if (buf) {
+ u64 next_seq;
+ u64 seq;
+ u32 idx;
+ enum log_flags prev;
+
+ if (clear_seq < log_first_seq) {
+ /* messages are gone, move to first available one */
+ clear_seq = log_first_seq;
+ clear_idx = log_first_idx;
+ }
+
+ /*
+ * Find first record that fits, including all following records,
+ * into the user-provided buffer for this dump.
+ */
+ seq = clear_seq;
+ idx = clear_idx;
+ prev = 0;
+ while (seq < log_next_seq) {
+ struct printk_log *msg = log_from_idx(idx);
+
+ len += msg_print_text(msg, prev, true, NULL, 0);
+ prev = msg->flags;
+ idx = log_next(idx);
+ seq++;
+ }
+
+ /* move first record forward until length fits into the buffer */
+ seq = clear_seq;
+ idx = clear_idx;
+ prev = 0;
+ while (len > size && seq < log_next_seq) {
+ struct printk_log *msg = log_from_idx(idx);
+
+ len -= msg_print_text(msg, prev, true, NULL, 0);
+ prev = msg->flags;
+ idx = log_next(idx);
+ seq++;
+ }
+
+ /* last message fitting into this dump */
+ next_seq = log_next_seq;
+
+ len = 0;
+ prev = 0;
+ while (len >= 0 && seq < next_seq) {
+ struct printk_log *msg = log_from_idx(idx);
+ int textlen;
+
+ textlen = msg_print_text(msg, prev, true, text,
+ LOG_LINE_MAX + PREFIX_MAX);
+ if (textlen < 0) {
+ len = textlen;
+ break;
+ }
+ idx = log_next(idx);
+ seq++;
+ prev = msg->flags;
+
+ raw_spin_unlock_irq(&logbuf_lock);
+ if (copy_to_user(buf + len, text, textlen))
+ len = -EFAULT;
+ else
+ len += textlen;
+ raw_spin_lock_irq(&logbuf_lock);
+
+ if (seq < log_first_seq) {
+ /* messages are gone, move to next one */
+ seq = log_first_seq;
+ idx = log_first_idx;
+ prev = 0;
+ }
+ }
+ }
+
+ if (clear) {
+ clear_seq = log_next_seq;
+ clear_idx = log_next_idx;
+ }
+ raw_spin_unlock_irq(&logbuf_lock);
+
+ kfree(text);
+ return len;
+}
+
+int do_syslog(int type, char __user *buf, int len, bool from_file)
+{
+ bool clear = false;
+ static int saved_console_loglevel = -1;
+ int error;
+
+ error = check_syslog_permissions(type, from_file);
+ if (error)
+ goto out;
+
+ error = security_syslog(type);
+ if (error)
+ return error;
+
+ switch (type) {
+ case SYSLOG_ACTION_CLOSE: /* Close log */
+ break;
+ case SYSLOG_ACTION_OPEN: /* Open log */
+ break;
+ case SYSLOG_ACTION_READ: /* Read from log */
+ error = -EINVAL;
+ if (!buf || len < 0)
+ goto out;
+ error = 0;
+ if (!len)
+ goto out;
+ if (!access_ok(VERIFY_WRITE, buf, len)) {
+ error = -EFAULT;
+ goto out;
+ }
+ error = wait_event_interruptible(log_wait,
+ syslog_seq != log_next_seq);
+ if (error)
+ goto out;
+ error = syslog_print(buf, len);
+ break;
+ /* Read/clear last kernel messages */
+ case SYSLOG_ACTION_READ_CLEAR:
+ clear = true;
+ /* FALL THRU */
+ /* Read last kernel messages */
+ case SYSLOG_ACTION_READ_ALL:
+ error = -EINVAL;
+ if (!buf || len < 0)
+ goto out;
+ error = 0;
+ if (!len)
+ goto out;
+ if (!access_ok(VERIFY_WRITE, buf, len)) {
+ error = -EFAULT;
+ goto out;
+ }
+ error = syslog_print_all(buf, len, clear);
+ break;
+ /* Clear ring buffer */
+ case SYSLOG_ACTION_CLEAR:
+ syslog_print_all(NULL, 0, true);
+ break;
+ /* Disable logging to console */
+ case SYSLOG_ACTION_CONSOLE_OFF:
+ if (saved_console_loglevel == -1)
+ saved_console_loglevel = console_loglevel;
+ console_loglevel = minimum_console_loglevel;
+ break;
+ /* Enable logging to console */
+ case SYSLOG_ACTION_CONSOLE_ON:
+ if (saved_console_loglevel != -1) {
+ console_loglevel = saved_console_loglevel;
+ saved_console_loglevel = -1;
+ }
+ break;
+ /* Set level of messages printed to console */
+ case SYSLOG_ACTION_CONSOLE_LEVEL:
+ error = -EINVAL;
+ if (len < 1 || len > 8)
+ goto out;
+ if (len < minimum_console_loglevel)
+ len = minimum_console_loglevel;
+ console_loglevel = len;
+ /* Implicitly re-enable logging to console */
+ saved_console_loglevel = -1;
+ error = 0;
+ break;
+ /* Number of chars in the log buffer */
+ case SYSLOG_ACTION_SIZE_UNREAD:
+ raw_spin_lock_irq(&logbuf_lock);
+ if (syslog_seq < log_first_seq) {
+ /* messages are gone, move to first one */
+ syslog_seq = log_first_seq;
+ syslog_idx = log_first_idx;
+ syslog_prev = 0;
+ syslog_partial = 0;
+ }
+ if (from_file) {
+ /*
+ * Short-cut for poll(/"proc/kmsg") which simply checks
+ * for pending data, not the size; return the count of
+ * records, not the length.
+ */
+ error = log_next_idx - syslog_idx;
+ } else {
+ u64 seq = syslog_seq;
+ u32 idx = syslog_idx;
+ enum log_flags prev = syslog_prev;
+
+ error = 0;
+ while (seq < log_next_seq) {
+ struct printk_log *msg = log_from_idx(idx);
+
+ error += msg_print_text(msg, prev, true, NULL, 0);
+ idx = log_next(idx);
+ seq++;
+ prev = msg->flags;
+ }
+ error -= syslog_partial;
+ }
+ raw_spin_unlock_irq(&logbuf_lock);
+ break;
+ /* Size of the log buffer */
+ case SYSLOG_ACTION_SIZE_BUFFER:
+ error = log_buf_len;
+ break;
+ default:
+ error = -EINVAL;
+ break;
+ }
+out:
+ return error;
+}
+
+SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len)
+{
+ return do_syslog(type, buf, len, SYSLOG_FROM_READER);
+}
+
+/*
+ * Call the console drivers, asking them to write out
+ * log_buf[start] to log_buf[end - 1].
+ * The console_lock must be held.
+ */
+static void call_console_drivers(int level, const char *text, size_t len)
+{
+ struct console *con;
+
+ trace_console(text, len);
+
- if (level >= console_loglevel && !ignore_loglevel)
- return;
+ if (!console_drivers)
+ return;
+
+ for_each_console(con) {
+ if (exclusive_console && con != exclusive_console)
+ continue;
+ if (!(con->flags & CON_ENABLED))
+ continue;
+ if (!con->write)
+ continue;
+ if (!cpu_online(smp_processor_id()) &&
+ !(con->flags & CON_ANYTIME))
+ continue;
++ if (level >= console_loglevel && !ignore_loglevel &&
++ !(con->flags & CON_ALLDATA))
++ continue;
+ con->write(con, text, len);
+ }
+}
+
+/*
+ * Zap console related locks when oopsing. Only zap at most once
+ * every 10 seconds, to leave time for slow consoles to print a
+ * full oops.
+ */
+static void zap_locks(void)
+{
+ static unsigned long oops_timestamp;
+
+ if (time_after_eq(jiffies, oops_timestamp) &&
+ !time_after(jiffies, oops_timestamp + 30 * HZ))
+ return;
+
+ oops_timestamp = jiffies;
+
+ debug_locks_off();
+ /* If a crash is occurring, make sure we can't deadlock */
+ raw_spin_lock_init(&logbuf_lock);
+ /* And make sure that we print immediately */
+ sema_init(&console_sem, 1);
+}
+
+/* Check if we have any console registered that can be called early in boot. */
+static int have_callable_console(void)
+{
+ struct console *con;
+
+ for_each_console(con)
+ if (con->flags & CON_ANYTIME)
+ return 1;
+
+ return 0;
+}
+
+/*
+ * Can we actually use the console at this time on this cpu?
+ *
+ * Console drivers may assume that per-cpu resources have
+ * been allocated. So unless they're explicitly marked as
+ * being able to cope (CON_ANYTIME) don't call them until
+ * this CPU is officially up.
+ */
+static inline int can_use_console(unsigned int cpu)
+{
+ return cpu_online(cpu) || have_callable_console();
+}
+
+/*
+ * Try to get console ownership to actually show the kernel
+ * messages from a 'printk'. Return true (and with the
+ * console_lock held, and 'console_locked' set) if it
+ * is successful, false otherwise.
+ *
+ * This gets called with the 'logbuf_lock' spinlock held and
+ * interrupts disabled. It should return with 'lockbuf_lock'
+ * released but interrupts still disabled.
+ */
+static int console_trylock_for_printk(unsigned int cpu)
+ __releases(&logbuf_lock)
+{
+ int retval = 0, wake = 0;
+
+ if (console_trylock()) {
+ retval = 1;
+
+ /*
+ * If we can't use the console, we need to release
+ * the console semaphore by hand to avoid flushing
+ * the buffer. We need to hold the console semaphore
+ * in order to do this test safely.
+ */
+ if (!can_use_console(cpu)) {
+ console_locked = 0;
+ wake = 1;
+ retval = 0;
+ }
+ }
+ logbuf_cpu = UINT_MAX;
+ raw_spin_unlock(&logbuf_lock);
+ if (wake)
+ up(&console_sem);
+ return retval;
+}
+
+int printk_delay_msec __read_mostly;
+
+static inline void printk_delay(void)
+{
+ if (unlikely(printk_delay_msec)) {
+ int m = printk_delay_msec;
+
+ while (m--) {
+ mdelay(1);
+ touch_nmi_watchdog();
+ }
+ }
+}
+
+/*
+ * Continuation lines are buffered, and not committed to the record buffer
+ * until the line is complete, or a race forces it. The line fragments
+ * though, are printed immediately to the consoles to ensure everything has
+ * reached the console in case of a kernel crash.
+ */
+static struct cont {
+ char buf[LOG_LINE_MAX];
+ size_t len; /* length == 0 means unused buffer */
+ size_t cons; /* bytes written to console */
+ struct task_struct *owner; /* task of first print*/
+ u64 ts_nsec; /* time of first print */
+ u8 level; /* log level of first message */
+ u8 facility; /* log level of first message */
+ enum log_flags flags; /* prefix, newline flags */
+ bool flushed:1; /* buffer sealed and committed */
+} cont;
+
+static void cont_flush(enum log_flags flags)
+{
+ if (cont.flushed)
+ return;
+ if (cont.len == 0)
+ return;
+
+ if (cont.cons) {
+ /*
+ * If a fragment of this line was directly flushed to the
+ * console; wait for the console to pick up the rest of the
+ * line. LOG_NOCONS suppresses a duplicated output.
+ */
+ log_store(cont.facility, cont.level, flags | LOG_NOCONS,
+ cont.ts_nsec, NULL, 0, cont.buf, cont.len);
+ cont.flags = flags;
+ cont.flushed = true;
+ } else {
+ /*
+ * If no fragment of this line ever reached the console,
+ * just submit it to the store and free the buffer.
+ */
+ log_store(cont.facility, cont.level, flags, 0,
+ NULL, 0, cont.buf, cont.len);
+ cont.len = 0;
+ }
+}
+
+static bool cont_add(int facility, int level, const char *text, size_t len)
+{
+ if (cont.len && cont.flushed)
+ return false;
+
+ if (cont.len + len > sizeof(cont.buf)) {
+ /* the line gets too long, split it up in separate records */
+ cont_flush(LOG_CONT);
+ return false;
+ }
+
+ if (!cont.len) {
+ cont.facility = facility;
+ cont.level = level;
+ cont.owner = current;
+ cont.ts_nsec = local_clock();
+ cont.flags = 0;
+ cont.cons = 0;
+ cont.flushed = false;
+ }
+
+ memcpy(cont.buf + cont.len, text, len);
+ cont.len += len;
+
+ if (cont.len > (sizeof(cont.buf) * 80) / 100)
+ cont_flush(LOG_CONT);
+
+ return true;
+}
+
+static size_t cont_print_text(char *text, size_t size)
+{
+ size_t textlen = 0;
+ size_t len;
+
+ if (cont.cons == 0 && (console_prev & LOG_NEWLINE)) {
+ textlen += print_time(cont.ts_nsec, text);
+ size -= textlen;
+ }
+
+ len = cont.len - cont.cons;
+ if (len > 0) {
+ if (len+1 > size)
+ len = size-1;
+ memcpy(text + textlen, cont.buf + cont.cons, len);
+ textlen += len;
+ cont.cons = cont.len;
+ }
+
+ if (cont.flushed) {
+ if (cont.flags & LOG_NEWLINE)
+ text[textlen++] = '\n';
+ /* got everything, release buffer */
+ cont.len = 0;
+ }
+ return textlen;
+}
+
+asmlinkage int vprintk_emit(int facility, int level,
+ const char *dict, size_t dictlen,
+ const char *fmt, va_list args)
+{
+ static int recursion_bug;
+ static char textbuf[LOG_LINE_MAX];
+ char *text = textbuf;
+ size_t text_len;
+ enum log_flags lflags = 0;
+ unsigned long flags;
+ int this_cpu;
+ int printed_len = 0;
+
+ boot_delay_msec(level);
+ printk_delay();
+
+ /* This stops the holder of console_sem just where we want him */
+ local_irq_save(flags);
+ this_cpu = smp_processor_id();
+
+ /*
+ * Ouch, printk recursed into itself!
+ */
+ if (unlikely(logbuf_cpu == this_cpu)) {
+ /*
+ * If a crash is occurring during printk() on this CPU,
+ * then try to get the crash message out but make sure
+ * we can't deadlock. Otherwise just return to avoid the
+ * recursion and return - but flag the recursion so that
+ * it can be printed at the next appropriate moment:
+ */
+ if (!oops_in_progress && !lockdep_recursing(current)) {
+ recursion_bug = 1;
+ goto out_restore_irqs;
+ }
+ zap_locks();
+ }
+
+ lockdep_off();
+ raw_spin_lock(&logbuf_lock);
+ logbuf_cpu = this_cpu;
+
+ if (recursion_bug) {
+ static const char recursion_msg[] =
+ "BUG: recent printk recursion!";
+
+ recursion_bug = 0;
+ printed_len += strlen(recursion_msg);
+ /* emit KERN_CRIT message */
+ log_store(0, 2, LOG_PREFIX|LOG_NEWLINE, 0,
+ NULL, 0, recursion_msg, printed_len);
+ }
+
+ /*
+ * The printf needs to come first; we need the syslog
+ * prefix which might be passed-in as a parameter.
+ */
+ text_len = vscnprintf(text, sizeof(textbuf), fmt, args);
+
+ /* mark and strip a trailing newline */
+ if (text_len && text[text_len-1] == '\n') {
+ text_len--;
+ lflags |= LOG_NEWLINE;
+ }
+
+ /* strip kernel syslog prefix and extract log level or control flags */
+ if (facility == 0) {
+ int kern_level = printk_get_level(text);
+
+ if (kern_level) {
+ const char *end_of_header = printk_skip_level(text);
+ switch (kern_level) {
+ case '0' ... '7':
+ if (level == -1)
+ level = kern_level - '0';
+ case 'd': /* KERN_DEFAULT */
+ lflags |= LOG_PREFIX;
+ case 'c': /* KERN_CONT */
+ break;
+ }
+ text_len -= end_of_header - text;
+ text = (char *)end_of_header;
+ }
+ }
+
+ if (level == -1)
+ level = default_message_loglevel;
+
+ if (dict)
+ lflags |= LOG_PREFIX|LOG_NEWLINE;
+
+ if (!(lflags & LOG_NEWLINE)) {
+ /*
+ * Flush the conflicting buffer. An earlier newline was missing,
+ * or another task also prints continuation lines.
+ */
+ if (cont.len && (lflags & LOG_PREFIX || cont.owner != current))
+ cont_flush(LOG_NEWLINE);
+
+ /* buffer line if possible, otherwise store it right away */
+ if (!cont_add(facility, level, text, text_len))
+ log_store(facility, level, lflags | LOG_CONT, 0,
+ dict, dictlen, text, text_len);
+ } else {
+ bool stored = false;
+
+ /*
+ * If an earlier newline was missing and it was the same task,
+ * either merge it with the current buffer and flush, or if
+ * there was a race with interrupts (prefix == true) then just
+ * flush it out and store this line separately.
+ */
+ if (cont.len && cont.owner == current) {
+ if (!(lflags & LOG_PREFIX))
+ stored = cont_add(facility, level, text, text_len);
+ cont_flush(LOG_NEWLINE);
+ }
+
+ if (!stored)
+ log_store(facility, level, lflags, 0,
+ dict, dictlen, text, text_len);
+ }
+ printed_len += text_len;
+
+ /*
+ * Try to acquire and then immediately release the console semaphore.
+ * The release will print out buffers and wake up /dev/kmsg and syslog()
+ * users.
+ *
+ * The console_trylock_for_printk() function will release 'logbuf_lock'
+ * regardless of whether it actually gets the console semaphore or not.
+ */
+ if (console_trylock_for_printk(this_cpu))
+ console_unlock();
+
+ lockdep_on();
+out_restore_irqs:
+ local_irq_restore(flags);
+
+ return printed_len;
+}
+EXPORT_SYMBOL(vprintk_emit);
+
+asmlinkage int vprintk(const char *fmt, va_list args)
+{
+ return vprintk_emit(0, -1, NULL, 0, fmt, args);
+}
+EXPORT_SYMBOL(vprintk);
+
+asmlinkage int printk_emit(int facility, int level,
+ const char *dict, size_t dictlen,
+ const char *fmt, ...)
+{
+ va_list args;
+ int r;
+
+ va_start(args, fmt);
+ r = vprintk_emit(facility, level, dict, dictlen, fmt, args);
+ va_end(args);
+
+ return r;
+}
+EXPORT_SYMBOL(printk_emit);
+
+/**
+ * printk - print a kernel message
+ * @fmt: format string
+ *
+ * This is printk(). It can be called from any context. We want it to work.
+ *
+ * We try to grab the console_lock. If we succeed, it's easy - we log the
+ * output and call the console drivers. If we fail to get the semaphore, we
+ * place the output into the log buffer and return. The current holder of
+ * the console_sem will notice the new output in console_unlock(); and will
+ * send it to the consoles before releasing the lock.
+ *
+ * One effect of this deferred printing is that code which calls printk() and
+ * then changes console_loglevel may break. This is because console_loglevel
+ * is inspected when the actual printing occurs.
+ *
+ * See also:
+ * printf(3)
+ *
+ * See the vsnprintf() documentation for format string extensions over C99.
+ */
+asmlinkage int printk(const char *fmt, ...)
+{
+ va_list args;
+ int r;
+
+#ifdef CONFIG_KGDB_KDB
+ if (unlikely(kdb_trap_printk)) {
+ va_start(args, fmt);
+ r = vkdb_printf(fmt, args);
+ va_end(args);
+ return r;
+ }
+#endif
+ va_start(args, fmt);
+ r = vprintk_emit(0, -1, NULL, 0, fmt, args);
+ va_end(args);
+
+ return r;
+}
+EXPORT_SYMBOL(printk);
+
+#else /* CONFIG_PRINTK */
+
+#define LOG_LINE_MAX 0
+#define PREFIX_MAX 0
+#define LOG_LINE_MAX 0
+static u64 syslog_seq;
+static u32 syslog_idx;
+static u64 console_seq;
+static u32 console_idx;
+static enum log_flags syslog_prev;
+static u64 log_first_seq;
+static u32 log_first_idx;
+static u64 log_next_seq;
+static enum log_flags console_prev;
+static struct cont {
+ size_t len;
+ size_t cons;
+ u8 level;
+ bool flushed:1;
+} cont;
+static struct printk_log *log_from_idx(u32 idx) { return NULL; }
+static u32 log_next(u32 idx) { return 0; }
+static void call_console_drivers(int level, const char *text, size_t len) {}
+static size_t msg_print_text(const struct printk_log *msg, enum log_flags prev,
+ bool syslog, char *buf, size_t size) { return 0; }
+static size_t cont_print_text(char *text, size_t size) { return 0; }
+
+#endif /* CONFIG_PRINTK */
+
+#ifdef CONFIG_EARLY_PRINTK
+struct console *early_console;
+
+void early_vprintk(const char *fmt, va_list ap)
+{
+ if (early_console) {
+ char buf[512];
+ int n = vscnprintf(buf, sizeof(buf), fmt, ap);
+
+ early_console->write(early_console, buf, n);
+ }
+}
+
+asmlinkage void early_printk(const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ early_vprintk(fmt, ap);
+ va_end(ap);
+}
+#endif
+
+static int __add_preferred_console(char *name, int idx, char *options,
+ char *brl_options)
+{
+ struct console_cmdline *c;
+ int i;
+
+ /*
+ * See if this tty is not yet registered, and
+ * if we have a slot free.
+ */
+ for (i = 0, c = console_cmdline;
+ i < MAX_CMDLINECONSOLES && c->name[0];
+ i++, c++) {
+ if (strcmp(c->name, name) == 0 && c->index == idx) {
+ if (!brl_options)
+ selected_console = i;
+ return 0;
+ }
+ }
+ if (i == MAX_CMDLINECONSOLES)
+ return -E2BIG;
+ if (!brl_options)
+ selected_console = i;
+ strlcpy(c->name, name, sizeof(c->name));
+ c->options = options;
+ braille_set_options(c, brl_options);
+
+ c->index = idx;
+ return 0;
+}
+/*
+ * Set up a list of consoles. Called from init/main.c
+ */
+static int __init console_setup(char *str)
+{
+ char buf[sizeof(console_cmdline[0].name) + 4]; /* 4 for index */
+ char *s, *options, *brl_options = NULL;
+ int idx;
+
+ if (_braille_console_setup(&str, &brl_options))
+ return 1;
+
+ /*
+ * Decode str into name, index, options.
+ */
+ if (str[0] >= '0' && str[0] <= '9') {
+ strcpy(buf, "ttyS");
+ strncpy(buf + 4, str, sizeof(buf) - 5);
+ } else {
+ strncpy(buf, str, sizeof(buf) - 1);
+ }
+ buf[sizeof(buf) - 1] = 0;
+ if ((options = strchr(str, ',')) != NULL)
+ *(options++) = 0;
+#ifdef __sparc__
+ if (!strcmp(str, "ttya"))
+ strcpy(buf, "ttyS0");
+ if (!strcmp(str, "ttyb"))
+ strcpy(buf, "ttyS1");
+#endif
+ for (s = buf; *s; s++)
+ if ((*s >= '0' && *s <= '9') || *s == ',')
+ break;
+ idx = simple_strtoul(s, NULL, 10);
+ *s = 0;
+
+ __add_preferred_console(buf, idx, options, brl_options);
+ console_set_on_cmdline = 1;
+ return 1;
+}
+__setup("console=", console_setup);
+
+/**
+ * add_preferred_console - add a device to the list of preferred consoles.
+ * @name: device name
+ * @idx: device index
+ * @options: options for this console
+ *
+ * The last preferred console added will be used for kernel messages
+ * and stdin/out/err for init. Normally this is used by console_setup
+ * above to handle user-supplied console arguments; however it can also
+ * be used by arch-specific code either to override the user or more
+ * commonly to provide a default console (ie from PROM variables) when
+ * the user has not supplied one.
+ */
+int add_preferred_console(char *name, int idx, char *options)
+{
+ return __add_preferred_console(name, idx, options, NULL);
+}
+
+int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options)
+{
+ struct console_cmdline *c;
+ int i;
+
+ for (i = 0, c = console_cmdline;
+ i < MAX_CMDLINECONSOLES && c->name[0];
+ i++, c++)
+ if (strcmp(c->name, name) == 0 && c->index == idx) {
+ strlcpy(c->name, name_new, sizeof(c->name));
+ c->name[sizeof(c->name) - 1] = 0;
+ c->options = options;
+ c->index = idx_new;
+ return i;
+ }
+ /* not found */
+ return -1;
+}
+
+bool console_suspend_enabled = 1;
+EXPORT_SYMBOL(console_suspend_enabled);
+
+static int __init console_suspend_disable(char *str)
+{
+ console_suspend_enabled = 0;
+ return 1;
+}
+__setup("no_console_suspend", console_suspend_disable);
+module_param_named(console_suspend, console_suspend_enabled,
+ bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(console_suspend, "suspend console during suspend"
+ " and hibernate operations");
+
+/**
+ * suspend_console - suspend the console subsystem
+ *
+ * This disables printk() while we go into suspend states
+ */
+void suspend_console(void)
+{
+ if (!console_suspend_enabled)
+ return;
+ printk("Suspending console(s) (use no_console_suspend to debug)\n");
+ console_lock();
+ console_suspended = 1;
+ up(&console_sem);
+}
+
+void resume_console(void)
+{
+ if (!console_suspend_enabled)
+ return;
+ down(&console_sem);
+ console_suspended = 0;
+ console_unlock();
+}
+
+/**
+ * console_cpu_notify - print deferred console messages after CPU hotplug
+ * @self: notifier struct
+ * @action: CPU hotplug event
+ * @hcpu: unused
+ *
+ * If printk() is called from a CPU that is not online yet, the messages
+ * will be spooled but will not show up on the console. This function is
+ * called when a new CPU comes online (or fails to come up), and ensures
+ * that any such output gets printed.
+ */
+static int console_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ switch (action) {
+ case CPU_ONLINE:
+ case CPU_DEAD:
+ case CPU_DOWN_FAILED:
+ case CPU_UP_CANCELED:
+ console_lock();
+ console_unlock();
+ }
+ return NOTIFY_OK;
+}
+
+/**
+ * console_lock - lock the console system for exclusive use.
+ *
+ * Acquires a lock which guarantees that the caller has
+ * exclusive access to the console system and the console_drivers list.
+ *
+ * Can sleep, returns nothing.
+ */
+void console_lock(void)
+{
+ might_sleep();
+
+ down(&console_sem);
+ if (console_suspended)
+ return;
+ console_locked = 1;
+ console_may_schedule = 1;
+ mutex_acquire(&console_lock_dep_map, 0, 0, _RET_IP_);
+}
+EXPORT_SYMBOL(console_lock);
+
+/**
+ * console_trylock - try to lock the console system for exclusive use.
+ *
+ * Tried to acquire a lock which guarantees that the caller has
+ * exclusive access to the console system and the console_drivers list.
+ *
+ * returns 1 on success, and 0 on failure to acquire the lock.
+ */
+int console_trylock(void)
+{
+ if (down_trylock(&console_sem))
+ return 0;
+ if (console_suspended) {
+ up(&console_sem);
+ return 0;
+ }
+ console_locked = 1;
+ console_may_schedule = 0;
+ mutex_acquire(&console_lock_dep_map, 0, 1, _RET_IP_);
+ return 1;
+}
+EXPORT_SYMBOL(console_trylock);
+
+int is_console_locked(void)
+{
+ return console_locked;
+}
+
+static void console_cont_flush(char *text, size_t size)
+{
+ unsigned long flags;
+ size_t len;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+
+ if (!cont.len)
+ goto out;
+
+ /*
+ * We still queue earlier records, likely because the console was
+ * busy. The earlier ones need to be printed before this one, we
+ * did not flush any fragment so far, so just let it queue up.
+ */
+ if (console_seq < log_next_seq && !cont.cons)
+ goto out;
+
+ len = cont_print_text(text, size);
+ raw_spin_unlock(&logbuf_lock);
+ stop_critical_timings();
+ call_console_drivers(cont.level, text, len);
+ start_critical_timings();
+ local_irq_restore(flags);
+ return;
+out:
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+}
+
+/**
+ * console_unlock - unlock the console system
+ *
+ * Releases the console_lock which the caller holds on the console system
+ * and the console driver list.
+ *
+ * While the console_lock was held, console output may have been buffered
+ * by printk(). If this is the case, console_unlock(); emits
+ * the output prior to releasing the lock.
+ *
+ * If there is output waiting, we wake /dev/kmsg and syslog() users.
+ *
+ * console_unlock(); may be called from any context.
+ */
+void console_unlock(void)
+{
+ static char text[LOG_LINE_MAX + PREFIX_MAX];
+ static u64 seen_seq;
+ unsigned long flags;
+ bool wake_klogd = false;
+ bool retry;
+
+ if (console_suspended) {
+ up(&console_sem);
+ return;
+ }
+
+ console_may_schedule = 0;
+
+ /* flush buffered message fragment immediately to console */
+ console_cont_flush(text, sizeof(text));
+again:
+ for (;;) {
+ struct printk_log *msg;
+ size_t len;
+ int level;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ if (seen_seq != log_next_seq) {
+ wake_klogd = true;
+ seen_seq = log_next_seq;
+ }
+
+ if (console_seq < log_first_seq) {
+ /* messages are gone, move to first one */
+ console_seq = log_first_seq;
+ console_idx = log_first_idx;
+ console_prev = 0;
+ }
+skip:
+ if (console_seq == log_next_seq)
+ break;
+
+ msg = log_from_idx(console_idx);
+ if (msg->flags & LOG_NOCONS) {
+ /*
+ * Skip record we have buffered and already printed
+ * directly to the console when we received it.
+ */
+ console_idx = log_next(console_idx);
+ console_seq++;
+ /*
+ * We will get here again when we register a new
+ * CON_PRINTBUFFER console. Clear the flag so we
+ * will properly dump everything later.
+ */
+ msg->flags &= ~LOG_NOCONS;
+ console_prev = msg->flags;
+ goto skip;
+ }
+
+ level = msg->level;
+ len = msg_print_text(msg, console_prev, false,
+ text, sizeof(text));
+ console_idx = log_next(console_idx);
+ console_seq++;
+ console_prev = msg->flags;
+ raw_spin_unlock(&logbuf_lock);
+
+ stop_critical_timings(); /* don't trace print latency */
+ call_console_drivers(level, text, len);
+ start_critical_timings();
+ local_irq_restore(flags);
+ }
+ console_locked = 0;
+ mutex_release(&console_lock_dep_map, 1, _RET_IP_);
+
+ /* Release the exclusive_console once it is used */
+ if (unlikely(exclusive_console))
+ exclusive_console = NULL;
+
+ raw_spin_unlock(&logbuf_lock);
+
+ up(&console_sem);
+
+ /*
+ * Someone could have filled up the buffer again, so re-check if there's
+ * something to flush. In case we cannot trylock the console_sem again,
+ * there's a new owner and the console_unlock() from them will do the
+ * flush, no worries.
+ */
+ raw_spin_lock(&logbuf_lock);
+ retry = console_seq != log_next_seq;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
+ if (retry && console_trylock())
+ goto again;
+
+ if (wake_klogd)
+ wake_up_klogd();
+}
+EXPORT_SYMBOL(console_unlock);
+
+/**
+ * console_conditional_schedule - yield the CPU if required
+ *
+ * If the console code is currently allowed to sleep, and
+ * if this CPU should yield the CPU to another task, do
+ * so here.
+ *
+ * Must be called within console_lock();.
+ */
+void __sched console_conditional_schedule(void)
+{
+ if (console_may_schedule)
+ cond_resched();
+}
+EXPORT_SYMBOL(console_conditional_schedule);
+
+void console_unblank(void)
+{
+ struct console *c;
+
+ /*
+ * console_unblank can no longer be called in interrupt context unless
+ * oops_in_progress is set to 1..
+ */
+ if (oops_in_progress) {
+ if (down_trylock(&console_sem) != 0)
+ return;
+ } else
+ console_lock();
+
+ console_locked = 1;
+ console_may_schedule = 0;
+ for_each_console(c)
+ if ((c->flags & CON_ENABLED) && c->unblank)
+ c->unblank();
+ console_unlock();
+}
+
+/*
+ * Return the console tty driver structure and its associated index
+ */
+struct tty_driver *console_device(int *index)
+{
+ struct console *c;
+ struct tty_driver *driver = NULL;
+
+ console_lock();
+ for_each_console(c) {
+ if (!c->device)
+ continue;
+ driver = c->device(c, index);
+ if (driver)
+ break;
+ }
+ console_unlock();
+ return driver;
+}
+
+/*
+ * Prevent further output on the passed console device so that (for example)
+ * serial drivers can disable console output before suspending a port, and can
+ * re-enable output afterwards.
+ */
+void console_stop(struct console *console)
+{
+ console_lock();
+ console->flags &= ~CON_ENABLED;
+ console_unlock();
+}
+EXPORT_SYMBOL(console_stop);
+
+void console_start(struct console *console)
+{
+ console_lock();
+ console->flags |= CON_ENABLED;
+ console_unlock();
+}
+EXPORT_SYMBOL(console_start);
+
+static int __read_mostly keep_bootcon;
+
+static int __init keep_bootcon_setup(char *str)
+{
+ keep_bootcon = 1;
+ printk(KERN_INFO "debug: skip boot console de-registration.\n");
+
+ return 0;
+}
+
+early_param("keep_bootcon", keep_bootcon_setup);
+
+/*
+ * The console driver calls this routine during kernel initialization
+ * to register the console printing procedure with printk() and to
+ * print any messages that were printed by the kernel before the
+ * console driver was initialized.
+ *
+ * This can happen pretty early during the boot process (because of
+ * early_printk) - sometimes before setup_arch() completes - be careful
+ * of what kernel features are used - they may not be initialised yet.
+ *
+ * There are two types of consoles - bootconsoles (early_printk) and
+ * "real" consoles (everything which is not a bootconsole) which are
+ * handled differently.
+ * - Any number of bootconsoles can be registered at any time.
+ * - As soon as a "real" console is registered, all bootconsoles
+ * will be unregistered automatically.
+ * - Once a "real" console is registered, any attempt to register a
+ * bootconsoles will be rejected
+ */
+void register_console(struct console *newcon)
+{
+ int i;
+ unsigned long flags;
+ struct console *bcon = NULL;
+ struct console_cmdline *c;
+
+ if (console_drivers)
+ for_each_console(bcon)
+ if (WARN(bcon == newcon,
+ "console '%s%d' already registered\n",
+ bcon->name, bcon->index))
+ return;
+
+ /*
+ * before we register a new CON_BOOT console, make sure we don't
+ * already have a valid console
+ */
+ if (console_drivers && newcon->flags & CON_BOOT) {
+ /* find the last or real console */
+ for_each_console(bcon) {
+ if (!(bcon->flags & CON_BOOT)) {
+ printk(KERN_INFO "Too late to register bootconsole %s%d\n",
+ newcon->name, newcon->index);
+ return;
+ }
+ }
+ }
+
+ if (console_drivers && console_drivers->flags & CON_BOOT)
+ bcon = console_drivers;
+
+ if (preferred_console < 0 || bcon || !console_drivers)
+ preferred_console = selected_console;
+
+ if (newcon->early_setup)
+ newcon->early_setup();
+
+ /*
+ * See if we want to use this console driver. If we
+ * didn't select a console we take the first one
+ * that registers here.
+ */
+ if (preferred_console < 0) {
+ if (newcon->index < 0)
+ newcon->index = 0;
+ if (newcon->setup == NULL ||
+ newcon->setup(newcon, NULL) == 0) {
+ newcon->flags |= CON_ENABLED;
+ if (newcon->device) {
+ newcon->flags |= CON_CONSDEV;
+ preferred_console = 0;
+ }
+ }
+ }
+
+ /*
+ * See if this console matches one we selected on
+ * the command line.
+ */
+ for (i = 0, c = console_cmdline;
+ i < MAX_CMDLINECONSOLES && c->name[0];
+ i++, c++) {
+ if (strcmp(c->name, newcon->name) != 0)
+ continue;
+ if (newcon->index >= 0 &&
+ newcon->index != c->index)
+ continue;
+ if (newcon->index < 0)
+ newcon->index = c->index;
+
+ if (_braille_register_console(newcon, c))
+ return;
+
+ if (newcon->setup &&
+ newcon->setup(newcon, console_cmdline[i].options) != 0)
+ break;
+ newcon->flags |= CON_ENABLED;
+ newcon->index = c->index;
+ if (i == selected_console) {
+ newcon->flags |= CON_CONSDEV;
+ preferred_console = selected_console;
+ }
+ break;
+ }
+
+ if (!(newcon->flags & CON_ENABLED))
+ return;
+
+ /*
+ * If we have a bootconsole, and are switching to a real console,
+ * don't print everything out again, since when the boot console, and
+ * the real console are the same physical device, it's annoying to
+ * see the beginning boot messages twice
+ */
+ if (bcon && ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV))
+ newcon->flags &= ~CON_PRINTBUFFER;
+
+ /*
+ * Put this console in the list - keep the
+ * preferred driver at the head of the list.
+ */
+ console_lock();
+ if ((newcon->flags & CON_CONSDEV) || console_drivers == NULL) {
+ newcon->next = console_drivers;
+ console_drivers = newcon;
+ if (newcon->next)
+ newcon->next->flags &= ~CON_CONSDEV;
+ } else {
+ newcon->next = console_drivers->next;
+ console_drivers->next = newcon;
+ }
+ if (newcon->flags & CON_PRINTBUFFER) {
+ /*
+ * console_unlock(); will print out the buffered messages
+ * for us.
+ */
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ console_seq = syslog_seq;
+ console_idx = syslog_idx;
+ console_prev = syslog_prev;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+ /*
+ * We're about to replay the log buffer. Only do this to the
+ * just-registered console to avoid excessive message spam to
+ * the already-registered consoles.
+ */
+ exclusive_console = newcon;
+ }
+ console_unlock();
+ console_sysfs_notify();
+
+ /*
+ * By unregistering the bootconsoles after we enable the real console
+ * we get the "console xxx enabled" message on all the consoles -
+ * boot consoles, real consoles, etc - this is to ensure that end
+ * users know there might be something in the kernel's log buffer that
+ * went to the bootconsole (that they do not see on the real console)
+ */
+ if (bcon &&
+ ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV) &&
+ !keep_bootcon) {
+ /* we need to iterate through twice, to make sure we print
+ * everything out, before we unregister the console(s)
+ */
+ printk(KERN_INFO "console [%s%d] enabled, bootconsole disabled\n",
+ newcon->name, newcon->index);
+ for_each_console(bcon)
+ if (bcon->flags & CON_BOOT)
+ unregister_console(bcon);
+ } else {
+ printk(KERN_INFO "%sconsole [%s%d] enabled\n",
+ (newcon->flags & CON_BOOT) ? "boot" : "" ,
+ newcon->name, newcon->index);
+ }
+}
+EXPORT_SYMBOL(register_console);
+
+int unregister_console(struct console *console)
+{
+ struct console *a, *b;
+ int res;
+
+ res = _braille_unregister_console(console);
+ if (res)
+ return res;
+
+ res = 1;
+ console_lock();
+ if (console_drivers == console) {
+ console_drivers=console->next;
+ res = 0;
+ } else if (console_drivers) {
+ for (a=console_drivers->next, b=console_drivers ;
+ a; b=a, a=b->next) {
+ if (a == console) {
+ b->next = a->next;
+ res = 0;
+ break;
+ }
+ }
+ }
+
+ /*
+ * If this isn't the last console and it has CON_CONSDEV set, we
+ * need to set it on the next preferred console.
+ */
+ if (console_drivers != NULL && console->flags & CON_CONSDEV)
+ console_drivers->flags |= CON_CONSDEV;
+
+ console_unlock();
+ console_sysfs_notify();
+ return res;
+}
+EXPORT_SYMBOL(unregister_console);
+
+static int __init printk_late_init(void)
+{
+ struct console *con;
+
+ for_each_console(con) {
+ if (!keep_bootcon && con->flags & CON_BOOT) {
+ printk(KERN_INFO "turn off boot console %s%d\n",
+ con->name, con->index);
+ unregister_console(con);
+ }
+ }
+ hotcpu_notifier(console_cpu_notify, 0);
+ return 0;
+}
+late_initcall(printk_late_init);
+
+#if defined CONFIG_PRINTK
+/*
+ * Delayed printk version, for scheduler-internal messages:
+ */
+#define PRINTK_BUF_SIZE 512
+
+#define PRINTK_PENDING_WAKEUP 0x01
+#define PRINTK_PENDING_SCHED 0x02
+
+static DEFINE_PER_CPU(int, printk_pending);
+static DEFINE_PER_CPU(char [PRINTK_BUF_SIZE], printk_sched_buf);
+
+static void wake_up_klogd_work_func(struct irq_work *irq_work)
+{
+ int pending = __this_cpu_xchg(printk_pending, 0);
+
+ if (pending & PRINTK_PENDING_SCHED) {
+ char *buf = __get_cpu_var(printk_sched_buf);
+ printk(KERN_WARNING "[sched_delayed] %s", buf);
+ }
+
+ if (pending & PRINTK_PENDING_WAKEUP)
+ wake_up_interruptible(&log_wait);
+}
+
+static DEFINE_PER_CPU(struct irq_work, wake_up_klogd_work) = {
+ .func = wake_up_klogd_work_func,
+ .flags = IRQ_WORK_LAZY,
+};
+
+void wake_up_klogd(void)
+{
+ preempt_disable();
+ if (waitqueue_active(&log_wait)) {
+ this_cpu_or(printk_pending, PRINTK_PENDING_WAKEUP);
+ irq_work_queue(&__get_cpu_var(wake_up_klogd_work));
+ }
+ preempt_enable();
+}
+
+int printk_sched(const char *fmt, ...)
+{
+ unsigned long flags;
+ va_list args;
+ char *buf;
+ int r;
+
+ local_irq_save(flags);
+ buf = __get_cpu_var(printk_sched_buf);
+
+ va_start(args, fmt);
+ r = vsnprintf(buf, PRINTK_BUF_SIZE, fmt, args);
+ va_end(args);
+
+ __this_cpu_or(printk_pending, PRINTK_PENDING_SCHED);
+ irq_work_queue(&__get_cpu_var(wake_up_klogd_work));
+ local_irq_restore(flags);
+
+ return r;
+}
+
+/*
+ * printk rate limiting, lifted from the networking subsystem.
+ *
+ * This enforces a rate limit: not more than 10 kernel messages
+ * every 5s to make a denial-of-service attack impossible.
+ */
+DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10);
+
+int __printk_ratelimit(const char *func)
+{
+ return ___ratelimit(&printk_ratelimit_state, func);
+}
+EXPORT_SYMBOL(__printk_ratelimit);
+
+/**
+ * printk_timed_ratelimit - caller-controlled printk ratelimiting
+ * @caller_jiffies: pointer to caller's state
+ * @interval_msecs: minimum interval between prints
+ *
+ * printk_timed_ratelimit() returns true if more than @interval_msecs
+ * milliseconds have elapsed since the last time printk_timed_ratelimit()
+ * returned true.
+ */
+bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+ unsigned int interval_msecs)
+{
+ if (*caller_jiffies == 0
+ || !time_in_range(jiffies, *caller_jiffies,
+ *caller_jiffies
+ + msecs_to_jiffies(interval_msecs))) {
+ *caller_jiffies = jiffies;
+ return true;
+ }
+ return false;
+}
+EXPORT_SYMBOL(printk_timed_ratelimit);
+
+static DEFINE_SPINLOCK(dump_list_lock);
+static LIST_HEAD(dump_list);
+
+/**
+ * kmsg_dump_register - register a kernel log dumper.
+ * @dumper: pointer to the kmsg_dumper structure
+ *
+ * Adds a kernel log dumper to the system. The dump callback in the
+ * structure will be called when the kernel oopses or panics and must be
+ * set. Returns zero on success and %-EINVAL or %-EBUSY otherwise.
+ */
+int kmsg_dump_register(struct kmsg_dumper *dumper)
+{
+ unsigned long flags;
+ int err = -EBUSY;
+
+ /* The dump callback needs to be set */
+ if (!dumper->dump)
+ return -EINVAL;
+
+ spin_lock_irqsave(&dump_list_lock, flags);
+ /* Don't allow registering multiple times */
+ if (!dumper->registered) {
+ dumper->registered = 1;
+ list_add_tail_rcu(&dumper->list, &dump_list);
+ err = 0;
+ }
+ spin_unlock_irqrestore(&dump_list_lock, flags);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_register);
+
+/**
+ * kmsg_dump_unregister - unregister a kmsg dumper.
+ * @dumper: pointer to the kmsg_dumper structure
+ *
+ * Removes a dump device from the system. Returns zero on success and
+ * %-EINVAL otherwise.
+ */
+int kmsg_dump_unregister(struct kmsg_dumper *dumper)
+{
+ unsigned long flags;
+ int err = -EINVAL;
+
+ spin_lock_irqsave(&dump_list_lock, flags);
+ if (dumper->registered) {
+ dumper->registered = 0;
+ list_del_rcu(&dumper->list);
+ err = 0;
+ }
+ spin_unlock_irqrestore(&dump_list_lock, flags);
+ synchronize_rcu();
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_unregister);
+
+static bool always_kmsg_dump;
+module_param_named(always_kmsg_dump, always_kmsg_dump, bool, S_IRUGO | S_IWUSR);
+
+/**
+ * kmsg_dump - dump kernel log to kernel message dumpers.
+ * @reason: the reason (oops, panic etc) for dumping
+ *
+ * Call each of the registered dumper's dump() callback, which can
+ * retrieve the kmsg records with kmsg_dump_get_line() or
+ * kmsg_dump_get_buffer().
+ */
+void kmsg_dump(enum kmsg_dump_reason reason)
+{
+ struct kmsg_dumper *dumper;
+ unsigned long flags;
+
+ if ((reason > KMSG_DUMP_OOPS) && !always_kmsg_dump)
+ return;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(dumper, &dump_list, list) {
+ if (dumper->max_reason && reason > dumper->max_reason)
+ continue;
+
+ /* initialize iterator with data about the stored records */
+ dumper->active = true;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ dumper->cur_seq = clear_seq;
+ dumper->cur_idx = clear_idx;
+ dumper->next_seq = log_next_seq;
+ dumper->next_idx = log_next_idx;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
+ /* invoke dumper which will iterate over records */
+ dumper->dump(dumper, reason);
+
+ /* reset iterator */
+ dumper->active = false;
+ }
+ rcu_read_unlock();
+}
+
+/**
+ * kmsg_dump_get_line_nolock - retrieve one kmsg log line (unlocked version)
+ * @dumper: registered kmsg dumper
+ * @syslog: include the "<4>" prefixes
+ * @line: buffer to copy the line to
+ * @size: maximum size of the buffer
+ * @len: length of line placed into buffer
+ *
+ * Start at the beginning of the kmsg buffer, with the oldest kmsg
+ * record, and copy one record into the provided buffer.
+ *
+ * Consecutive calls will return the next available record moving
+ * towards the end of the buffer with the youngest messages.
+ *
+ * A return value of FALSE indicates that there are no more records to
+ * read.
+ *
+ * The function is similar to kmsg_dump_get_line(), but grabs no locks.
+ */
+bool kmsg_dump_get_line_nolock(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len)
+{
+ struct printk_log *msg;
+ size_t l = 0;
+ bool ret = false;
+
+ if (!dumper->active)
+ goto out;
+
+ if (dumper->cur_seq < log_first_seq) {
+ /* messages are gone, move to first available one */
+ dumper->cur_seq = log_first_seq;
+ dumper->cur_idx = log_first_idx;
+ }
+
+ /* last entry */
+ if (dumper->cur_seq >= log_next_seq)
+ goto out;
+
+ msg = log_from_idx(dumper->cur_idx);
+ l = msg_print_text(msg, 0, syslog, line, size);
+
+ dumper->cur_idx = log_next(dumper->cur_idx);
+ dumper->cur_seq++;
+ ret = true;
+out:
+ if (len)
+ *len = l;
+ return ret;
+}
+
+/**
+ * kmsg_dump_get_line - retrieve one kmsg log line
+ * @dumper: registered kmsg dumper
+ * @syslog: include the "<4>" prefixes
+ * @line: buffer to copy the line to
+ * @size: maximum size of the buffer
+ * @len: length of line placed into buffer
+ *
+ * Start at the beginning of the kmsg buffer, with the oldest kmsg
+ * record, and copy one record into the provided buffer.
+ *
+ * Consecutive calls will return the next available record moving
+ * towards the end of the buffer with the youngest messages.
+ *
+ * A return value of FALSE indicates that there are no more records to
+ * read.
+ */
+bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len)
+{
+ unsigned long flags;
+ bool ret;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ ret = kmsg_dump_get_line_nolock(dumper, syslog, line, size, len);
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
+
+/**
+ * kmsg_dump_get_buffer - copy kmsg log lines
+ * @dumper: registered kmsg dumper
+ * @syslog: include the "<4>" prefixes
+ * @buf: buffer to copy the line to
+ * @size: maximum size of the buffer
+ * @len: length of line placed into buffer
+ *
+ * Start at the end of the kmsg buffer and fill the provided buffer
+ * with as many of the the *youngest* kmsg records that fit into it.
+ * If the buffer is large enough, all available kmsg records will be
+ * copied with a single call.
+ *
+ * Consecutive calls will fill the buffer with the next block of
+ * available older records, not including the earlier retrieved ones.
+ *
+ * A return value of FALSE indicates that there are no more records to
+ * read.
+ */
+bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+ char *buf, size_t size, size_t *len)
+{
+ unsigned long flags;
+ u64 seq;
+ u32 idx;
+ u64 next_seq;
+ u32 next_idx;
+ enum log_flags prev;
+ size_t l = 0;
+ bool ret = false;
+
+ if (!dumper->active)
+ goto out;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ if (dumper->cur_seq < log_first_seq) {
+ /* messages are gone, move to first available one */
+ dumper->cur_seq = log_first_seq;
+ dumper->cur_idx = log_first_idx;
+ }
+
+ /* last entry */
+ if (dumper->cur_seq >= dumper->next_seq) {
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+ goto out;
+ }
+
+ /* calculate length of entire buffer */
+ seq = dumper->cur_seq;
+ idx = dumper->cur_idx;
+ prev = 0;
+ while (seq < dumper->next_seq) {
+ struct printk_log *msg = log_from_idx(idx);
+
+ l += msg_print_text(msg, prev, true, NULL, 0);
+ idx = log_next(idx);
+ seq++;
+ prev = msg->flags;
+ }
+
+ /* move first record forward until length fits into the buffer */
+ seq = dumper->cur_seq;
+ idx = dumper->cur_idx;
+ prev = 0;
+ while (l > size && seq < dumper->next_seq) {
+ struct printk_log *msg = log_from_idx(idx);
+
+ l -= msg_print_text(msg, prev, true, NULL, 0);
+ idx = log_next(idx);
+ seq++;
+ prev = msg->flags;
+ }
+
+ /* last message in next interation */
+ next_seq = seq;
+ next_idx = idx;
+
+ l = 0;
+ prev = 0;
+ while (seq < dumper->next_seq) {
+ struct printk_log *msg = log_from_idx(idx);
+
+ l += msg_print_text(msg, prev, syslog, buf + l, size - l);
+ idx = log_next(idx);
+ seq++;
+ prev = msg->flags;
+ }
+
+ dumper->next_seq = next_seq;
+ dumper->next_idx = next_idx;
+ ret = true;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+out:
+ if (len)
+ *len = l;
+ return ret;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_get_buffer);
+
+/**
+ * kmsg_dump_rewind_nolock - reset the interator (unlocked version)
+ * @dumper: registered kmsg dumper
+ *
+ * Reset the dumper's iterator so that kmsg_dump_get_line() and
+ * kmsg_dump_get_buffer() can be called again and used multiple
+ * times within the same dumper.dump() callback.
+ *
+ * The function is similar to kmsg_dump_rewind(), but grabs no locks.
+ */
+void kmsg_dump_rewind_nolock(struct kmsg_dumper *dumper)
+{
+ dumper->cur_seq = clear_seq;
+ dumper->cur_idx = clear_idx;
+ dumper->next_seq = log_next_seq;
+ dumper->next_idx = log_next_idx;
+}
+
+/**
+ * kmsg_dump_rewind - reset the interator
+ * @dumper: registered kmsg dumper
+ *
+ * Reset the dumper's iterator so that kmsg_dump_get_line() and
+ * kmsg_dump_get_buffer() can be called again and used multiple
+ * times within the same dumper.dump() callback.
+ */
+void kmsg_dump_rewind(struct kmsg_dumper *dumper)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ kmsg_dump_rewind_nolock(dumper);
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_rewind);
+
+static char dump_stack_arch_desc_str[128];
+
+/**
+ * dump_stack_set_arch_desc - set arch-specific str to show with task dumps
+ * @fmt: printf-style format string
+ * @...: arguments for the format string
+ *
+ * The configured string will be printed right after utsname during task
+ * dumps. Usually used to add arch-specific system identifiers. If an
+ * arch wants to make use of such an ID string, it should initialize this
+ * as soon as possible during boot.
+ */
+void __init dump_stack_set_arch_desc(const char *fmt, ...)
+{
+ va_list args;
+
+ va_start(args, fmt);
+ vsnprintf(dump_stack_arch_desc_str, sizeof(dump_stack_arch_desc_str),
+ fmt, args);
+ va_end(args);
+}
+
+/**
+ * dump_stack_print_info - print generic debug info for dump_stack()
+ * @log_lvl: log level
+ *
+ * Arch-specific dump_stack() implementations can use this function to
+ * print out the same debug information as the generic dump_stack().
+ */
+void dump_stack_print_info(const char *log_lvl)
+{
+ printk("%sCPU: %d PID: %d Comm: %.20s %s %s %.*s\n",
+ log_lvl, raw_smp_processor_id(), current->pid, current->comm,
+ print_tainted(), init_utsname()->release,
+ (int)strcspn(init_utsname()->version, " "),
+ init_utsname()->version);
+
+ if (dump_stack_arch_desc_str[0] != '\0')
+ printk("%sHardware name: %s\n",
+ log_lvl, dump_stack_arch_desc_str);
+
+ print_worker_info(log_lvl, current);
+}
+
+/**
+ * show_regs_print_info - print generic debug info for show_regs()
+ * @log_lvl: log level
+ *
+ * show_regs() implementations can use this function to print out generic
+ * debug information.
+ */
+void show_regs_print_info(const char *log_lvl)
+{
+ dump_stack_print_info(log_lvl);
+
+ printk("%stask: %p ti: %p task.ti: %p\n",
+ log_lvl, current, current_thread_info(),
+ task_thread_info(current));
+}
+
+#endif
^ permalink raw reply [flat|nested] 20+ messages in thread
* linux-next: manual merge of the block tree
2013-09-30 11:26 linux-next: manual merge of the bcon tree Thierry Reding
@ 2013-09-30 11:26 ` Thierry Reding
[not found] ` <1380540373-25352-1-git-send-email-treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
` (8 subsequent siblings)
9 siblings, 0 replies; 20+ messages in thread
From: Thierry Reding @ 2013-09-30 11:26 UTC (permalink / raw)
To: Jens Axboe; +Cc: linux-next, linux-kernel
Today's linux-next merge of the block tree got conflicts in
drivers/md/bcache/bcache.h
drivers/md/bcache/bset.c
drivers/md/bcache/journal.c
drivers/md/bcache/request.c
drivers/md/bcache/writeback.c
I fixed it up (see below). Please check if the resolution looks correct.
Thanks,
Thierry
diff --cc drivers/md/bcache/btree.c
index f42fc7e,117a12a..1ccb702
--- a/drivers/md/bcache/btree.c
+++ b/drivers/md/bcache/btree.c
@@@ -633,10 -712,10 +707,10 @@@ static unsigned long bch_mca_scan(struc
break;
if (++i > 3 &&
- !mca_reap(b, NULL, 0)) {
+ !mca_reap(b, 0, false)) {
mca_data_free(b);
rw_unlock(true, b);
- --nr;
+ freed++;
}
}
diff --cc drivers/md/bcache/request.c
index 71eb233,231b108..49ee1cf
--- a/drivers/md/bcache/request.c
+++ b/drivers/md/bcache/request.c
@@@ -979,68 -1059,52 +1059,55 @@@ static void cached_dev_write(struct cac
if (should_writeback(dc, s->orig_bio,
cache_mode(dc, bio),
- s->op.skip)) {
- s->op.skip = false;
- s->writeback = true;
+ s->iop.bypass)) {
+ s->iop.bypass = false;
+ s->iop.writeback = true;
}
- if (s->op.skip)
- goto skip;
-
- trace_bcache_write(s->orig_bio, s->writeback, s->op.skip);
+ if (s->iop.bypass) {
+ s->iop.bio = s->orig_bio;
+ bio_get(s->iop.bio);
- if (!s->writeback) {
- s->op.cache_bio = bio_clone_bioset(bio, GFP_NOIO,
- dc->disk.bio_split);
-
- closure_bio_submit(bio, cl, s->d);
- } else {
+ if (!(bio->bi_rw & REQ_DISCARD) ||
+ blk_queue_discard(bdev_get_queue(dc->bdev)))
+ closure_bio_submit(bio, cl, s->d);
+ } else if (s->iop.writeback) {
bch_writeback_add(dc);
- if (s->iop.flush_journal) {
+ if (bio->bi_rw & REQ_FLUSH) {
/* Also need to send a flush to the backing device */
- s->iop.bio = bio_clone_bioset(bio, GFP_NOIO,
- dc->disk.bio_split);
+ struct bio *flush = bio_alloc_bioset(0, GFP_NOIO,
+ dc->disk.bio_split);
- bio->bi_size = 0;
- bio->bi_vcnt = 0;
- closure_bio_submit(bio, cl, s->d);
+ flush->bi_rw = WRITE_FLUSH;
+ flush->bi_bdev = bio->bi_bdev;
+ flush->bi_end_io = request_endio;
+ flush->bi_private = cl;
+
+ closure_bio_submit(flush, cl, s->d);
} else {
- s->op.cache_bio = bio;
+ s->iop.bio = bio;
}
- }
- out:
- closure_call(&s->op.cl, bch_insert_data, NULL, cl);
- continue_at(cl, cached_dev_write_complete, NULL);
- skip:
- s->op.skip = true;
- s->op.cache_bio = s->orig_bio;
- bio_get(s->op.cache_bio);
+ } else {
+ s->iop.bio = bio_clone_bioset(bio, GFP_NOIO,
+ dc->disk.bio_split);
- if ((bio->bi_rw & REQ_DISCARD) &&
- !blk_queue_discard(bdev_get_queue(dc->bdev)))
- goto out;
+ closure_bio_submit(bio, cl, s->d);
+ }
- closure_bio_submit(bio, cl, s->d);
- goto out;
+ closure_call(&s->iop.cl, bch_data_insert, NULL, cl);
+ continue_at(cl, cached_dev_write_complete, NULL);
}
- static void request_nodata(struct cached_dev *dc, struct search *s)
+ static void cached_dev_nodata(struct closure *cl)
{
- struct closure *cl = &s->cl;
+ struct search *s = container_of(cl, struct search, cl);
struct bio *bio = &s->bio.bio;
- if (bio->bi_rw & REQ_DISCARD) {
- request_write(dc, s);
- return;
- }
-
- if (s->op.flush_journal)
- bch_journal_meta(s->op.c, cl);
+ if (s->iop.flush_journal)
+ bch_journal_meta(s->iop.c, cl);
+ /* If it's a flush, we send the flush to the backing device too */
closure_bio_submit(bio, cl, s->d);
continue_at(cl, cached_dev_bio_complete, NULL);
^ permalink raw reply [flat|nested] 20+ messages in thread
* linux-next: manual merge of the cgroup tree
[not found] ` <1380540373-25352-1-git-send-email-treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
@ 2013-09-30 11:26 ` Thierry Reding
0 siblings, 0 replies; 20+ messages in thread
From: Thierry Reding @ 2013-09-30 11:26 UTC (permalink / raw)
To: Tejun Heo, Li Zefan
Cc: cgroups-u79uwXL29TY76Z2rM5mHXA,
linux-next-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Today's linux-next merge of the cgroup tree got conflicts in
mm/memcontrol.c
I fixed it up (see below). Please check if the resolution looks correct.
Thanks,
Thierry
---
diff --cc mm/memcontrol.c
index 1c52ddb,65a46ef..84dcc5c
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@@ -6203,9 -5979,6 +6216,8 @@@ static void __mem_cgroup_free(struct me
int node;
size_t size = memcg_size();
+ mem_cgroup_remove_from_trees(memcg);
- free_css_id(&mem_cgroup_subsys, &memcg->css);
+
for_each_node(node)
free_mem_cgroup_per_zone_info(memcg, node);
^ permalink raw reply [flat|nested] 20+ messages in thread
* linux-next: manual merge of the drm-intel tree
2013-09-30 11:26 linux-next: manual merge of the bcon tree Thierry Reding
2013-09-30 11:26 ` linux-next: manual merge of the block tree Thierry Reding
[not found] ` <1380540373-25352-1-git-send-email-treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
@ 2013-09-30 11:26 ` Thierry Reding
2013-09-30 11:32 ` Daniel Vetter
2013-09-30 11:26 ` linux-next: manual merge of the ipsec-next tree Thierry Reding
` (6 subsequent siblings)
9 siblings, 1 reply; 20+ messages in thread
From: Thierry Reding @ 2013-09-30 11:26 UTC (permalink / raw)
To: Daniel Vetter; +Cc: intel-gfx, linux-next, linux-kernel, dri-devel
Today's linux-next merge of the drm-intel tree got conflicts in
drivers/gpu/drm/i915/intel_display.c
I fixed it up (see below). Please check if the resolution looks correct.
Thanks,
Thierry
---
diff --cc drivers/gpu/drm/i915/intel_display.c
index e5822e7,cbbdab6..76870f0
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@@ -4775,21 -4882,8 +4882,12 @@@ static void i9xx_set_pipeconf(struct in
pipeconf = 0;
+ if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
+ I915_READ(PIPECONF(intel_crtc->pipe)) & PIPECONF_ENABLE)
+ pipeconf |= PIPECONF_ENABLE;
+
- if (intel_crtc->pipe == 0 && INTEL_INFO(dev)->gen < 4) {
- /* Enable pixel doubling when the dot clock is > 90% of the (display)
- * core speed.
- *
- * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
- * pipe == 0 check?
- */
- if (intel_crtc->config.requested_mode.clock >
- dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
- pipeconf |= PIPECONF_DOUBLE_WIDE;
- }
+ if (intel_crtc->config.double_wide)
+ pipeconf |= PIPECONF_DOUBLE_WIDE;
/* only g4x and later have fancy bpc/dither controls */
if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
^ permalink raw reply [flat|nested] 20+ messages in thread
* linux-next: manual merge of the ipsec-next tree
2013-09-30 11:26 linux-next: manual merge of the bcon tree Thierry Reding
` (2 preceding siblings ...)
2013-09-30 11:26 ` linux-next: manual merge of the drm-intel tree Thierry Reding
@ 2013-09-30 11:26 ` Thierry Reding
2013-09-30 11:26 ` linux-next: manual merge of the net-next tree Thierry Reding
` (5 subsequent siblings)
9 siblings, 0 replies; 20+ messages in thread
From: Thierry Reding @ 2013-09-30 11:26 UTC (permalink / raw)
To: Steffen Klassert, Herbert Xu, David S. Miller
Cc: netdev, linux-next, linux-kernel
Today's linux-next merge of the ipsec-next tree got conflicts in
include/net/xfrm.h
I fixed it up (see below). Please check if the resolution looks correct.
Thanks,
Thierry
---
diff --cc include/net/xfrm.h
index 7657461,c7afa6e..041820c
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@@ -1493,39 -1495,35 +1499,39 @@@ static inline int xfrm4_rcv_spi(struct
return xfrm4_rcv_encap(skb, nexthdr, spi, 0);
}
-extern int xfrm4_extract_output(struct xfrm_state *x, struct sk_buff *skb);
-extern int xfrm4_prepare_output(struct xfrm_state *x, struct sk_buff *skb);
-extern int xfrm4_output(struct sk_buff *skb);
-extern int xfrm4_output_finish(struct sk_buff *skb);
-extern int xfrm4_tunnel_register(struct xfrm_tunnel *handler, unsigned short family);
-extern int xfrm4_tunnel_deregister(struct xfrm_tunnel *handler, unsigned short family);
-extern int xfrm4_mode_tunnel_input_register(struct xfrm_tunnel_notifier *handler);
-extern int xfrm4_mode_tunnel_input_deregister(struct xfrm_tunnel_notifier *handler);
-extern int xfrm6_extract_header(struct sk_buff *skb);
-extern int xfrm6_extract_input(struct xfrm_state *x, struct sk_buff *skb);
-extern int xfrm6_rcv_spi(struct sk_buff *skb, int nexthdr, __be32 spi);
-extern int xfrm6_transport_finish(struct sk_buff *skb, int async);
-extern int xfrm6_rcv(struct sk_buff *skb);
-extern int xfrm6_input_addr(struct sk_buff *skb, xfrm_address_t *daddr,
- xfrm_address_t *saddr, u8 proto);
-extern int xfrm6_tunnel_register(struct xfrm6_tunnel *handler, unsigned short family);
-extern int xfrm6_tunnel_deregister(struct xfrm6_tunnel *handler, unsigned short family);
-extern __be32 xfrm6_tunnel_alloc_spi(struct net *net, xfrm_address_t *saddr);
-extern __be32 xfrm6_tunnel_spi_lookup(struct net *net, const xfrm_address_t *saddr);
-extern int xfrm6_extract_output(struct xfrm_state *x, struct sk_buff *skb);
-extern int xfrm6_prepare_output(struct xfrm_state *x, struct sk_buff *skb);
-extern int xfrm6_output(struct sk_buff *skb);
-extern int xfrm6_output_finish(struct sk_buff *skb);
-extern int xfrm6_find_1stfragopt(struct xfrm_state *x, struct sk_buff *skb,
- u8 **prevhdr);
+int xfrm4_extract_output(struct xfrm_state *x, struct sk_buff *skb);
+int xfrm4_prepare_output(struct xfrm_state *x, struct sk_buff *skb);
+int xfrm4_output(struct sk_buff *skb);
+int xfrm4_output_finish(struct sk_buff *skb);
+int xfrm4_tunnel_register(struct xfrm_tunnel *handler, unsigned short family);
+int xfrm4_tunnel_deregister(struct xfrm_tunnel *handler, unsigned short family);
- int xfrm4_mode_tunnel_input_register(struct xfrm_tunnel *handler);
- int xfrm4_mode_tunnel_input_deregister(struct xfrm_tunnel *handler);
++int xfrm4_mode_tunnel_input_register(struct xfrm_tunnel_notifier *handler);
++int xfrm4_mode_tunnel_input_deregister(struct xfrm_tunnel_notifier *handler);
+void xfrm4_local_error(struct sk_buff *skb, u32 mtu);
+int xfrm6_extract_header(struct sk_buff *skb);
+int xfrm6_extract_input(struct xfrm_state *x, struct sk_buff *skb);
+int xfrm6_rcv_spi(struct sk_buff *skb, int nexthdr, __be32 spi);
+int xfrm6_transport_finish(struct sk_buff *skb, int async);
+int xfrm6_rcv(struct sk_buff *skb);
+int xfrm6_input_addr(struct sk_buff *skb, xfrm_address_t *daddr,
+ xfrm_address_t *saddr, u8 proto);
+int xfrm6_tunnel_register(struct xfrm6_tunnel *handler, unsigned short family);
+int xfrm6_tunnel_deregister(struct xfrm6_tunnel *handler,
+ unsigned short family);
+__be32 xfrm6_tunnel_alloc_spi(struct net *net, xfrm_address_t *saddr);
+__be32 xfrm6_tunnel_spi_lookup(struct net *net, const xfrm_address_t *saddr);
+int xfrm6_extract_output(struct xfrm_state *x, struct sk_buff *skb);
+int xfrm6_prepare_output(struct xfrm_state *x, struct sk_buff *skb);
+int xfrm6_output(struct sk_buff *skb);
+int xfrm6_output_finish(struct sk_buff *skb);
+int xfrm6_find_1stfragopt(struct xfrm_state *x, struct sk_buff *skb,
+ u8 **prevhdr);
+void xfrm6_local_error(struct sk_buff *skb, u32 mtu);
#ifdef CONFIG_XFRM
-extern int xfrm4_udp_encap_rcv(struct sock *sk, struct sk_buff *skb);
-extern int xfrm_user_policy(struct sock *sk, int optname, u8 __user *optval, int optlen);
+int xfrm4_udp_encap_rcv(struct sock *sk, struct sk_buff *skb);
+int xfrm_user_policy(struct sock *sk, int optname,
+ u8 __user *optval, int optlen);
#else
static inline int xfrm_user_policy(struct sock *sk, int optname, u8 __user *optval, int optlen)
{
^ permalink raw reply [flat|nested] 20+ messages in thread
* linux-next: manual merge of the net-next tree
2013-09-30 11:26 linux-next: manual merge of the bcon tree Thierry Reding
` (3 preceding siblings ...)
2013-09-30 11:26 ` linux-next: manual merge of the ipsec-next tree Thierry Reding
@ 2013-09-30 11:26 ` Thierry Reding
2013-09-30 11:26 ` linux-next: manual merge of the random tree Thierry Reding
` (4 subsequent siblings)
9 siblings, 0 replies; 20+ messages in thread
From: Thierry Reding @ 2013-09-30 11:26 UTC (permalink / raw)
To: David S. Miller; +Cc: netdev, linux-next, linux-kernel
Today's linux-next merge of the net-next tree got conflicts in
arch/h8300/include/uapi/asm/socket.h
drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
include/net/secure_seq.h
I removed the h8300 file and I fixed up the other two (see below). Please
check if the resolution looks correct.
Thanks,
Thierry
---
diff --cc drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
index 74156f8,5bc0276..7f1340d
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
@@@ -132,35 -132,33 +132,34 @@@ struct pktq *brcmf_bus_gettxq(struct br
* interface functions from common layer
*/
- extern bool brcmf_c_prec_enq(struct device *dev, struct pktq *q,
- struct sk_buff *pkt, int prec);
+ bool brcmf_c_prec_enq(struct device *dev, struct pktq *q, struct sk_buff *pkt,
+ int prec);
/* Receive frame for delivery to OS. Callee disposes of rxp. */
- extern void brcmf_rx_frames(struct device *dev, struct sk_buff_head *rxlist);
+ void brcmf_rx_frames(struct device *dev, struct sk_buff_head *rxlist);
/* Indication from bus module regarding presence/insertion of dongle. */
- extern int brcmf_attach(uint bus_hdrlen, struct device *dev);
+ int brcmf_attach(uint bus_hdrlen, struct device *dev);
/* Indication from bus module regarding removal/absence of dongle */
- extern void brcmf_detach(struct device *dev);
+ void brcmf_detach(struct device *dev);
/* Indication from bus module that dongle should be reset */
- extern void brcmf_dev_reset(struct device *dev);
+ void brcmf_dev_reset(struct device *dev);
/* Indication from bus module to change flow-control state */
- extern void brcmf_txflowblock(struct device *dev, bool state);
+ void brcmf_txflowblock(struct device *dev, bool state);
/* Notify the bus has transferred the tx packet to firmware */
- extern void brcmf_txcomplete(struct device *dev, struct sk_buff *txp,
- bool success);
+ void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success);
- extern int brcmf_bus_start(struct device *dev);
+ int brcmf_bus_start(struct device *dev);
#ifdef CONFIG_BRCMFMAC_SDIO
- extern void brcmf_sdio_exit(void);
- extern void brcmf_sdio_init(void);
- extern void brcmf_sdio_register(void);
+ void brcmf_sdio_exit(void);
+ void brcmf_sdio_init(void);
++void brcmf_sdio_register(void);
#endif
#ifdef CONFIG_BRCMFMAC_USB
- extern void brcmf_usb_exit(void);
- extern void brcmf_usb_register(void);
+ void brcmf_usb_exit(void);
-void brcmf_usb_init(void);
++void brcmf_usb_register(void);
#endif
#endif /* _BRCMF_BUS_H_ */
diff --cc include/net/secure_seq.h
index c2e542b,52c1a90..f257486
--- a/include/net/secure_seq.h
+++ b/include/net/secure_seq.h
@@@ -3,18 -3,19 +3,18 @@@
#include <linux/types.h>
- extern __u32 secure_ip_id(__be32 daddr);
- extern __u32 secure_ipv6_id(const __be32 daddr[4]);
- extern u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
- extern u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
- __be16 dport);
- extern __u32 secure_tcp_sequence_number(__be32 saddr, __be32 daddr,
- __be16 sport, __be16 dport);
- extern __u32 secure_tcpv6_sequence_number(const __be32 *saddr, const __be32 *daddr,
- __be16 sport, __be16 dport);
- extern u64 secure_dccp_sequence_number(__be32 saddr, __be32 daddr,
- __be16 sport, __be16 dport);
- extern u64 secure_dccpv6_sequence_number(__be32 *saddr, __be32 *daddr,
- __be16 sport, __be16 dport);
-void net_secret_init(void);
+ __u32 secure_ip_id(__be32 daddr);
+ __u32 secure_ipv6_id(const __be32 daddr[4]);
+ u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
+ u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
+ __be16 dport);
+ __u32 secure_tcp_sequence_number(__be32 saddr, __be32 daddr,
+ __be16 sport, __be16 dport);
+ __u32 secure_tcpv6_sequence_number(const __be32 *saddr, const __be32 *daddr,
+ __be16 sport, __be16 dport);
+ u64 secure_dccp_sequence_number(__be32 saddr, __be32 daddr,
+ __be16 sport, __be16 dport);
+ u64 secure_dccpv6_sequence_number(__be32 *saddr, __be32 *daddr,
+ __be16 sport, __be16 dport);
#endif /* _NET_SECURE_SEQ */
^ permalink raw reply [flat|nested] 20+ messages in thread
* linux-next: manual merge of the random tree
2013-09-30 11:26 linux-next: manual merge of the bcon tree Thierry Reding
` (4 preceding siblings ...)
2013-09-30 11:26 ` linux-next: manual merge of the net-next tree Thierry Reding
@ 2013-09-30 11:26 ` Thierry Reding
2013-09-30 11:26 ` linux-next: manual merge of the sh tree Thierry Reding
` (3 subsequent siblings)
9 siblings, 0 replies; 20+ messages in thread
From: Thierry Reding @ 2013-09-30 11:26 UTC (permalink / raw)
Cc: linux-next, linux-kernel
Today's linux-next merge of the random tree got conflicts in
init/main.c
I fixed it up (see below). Please check if the resolution looks correct.
Thanks,
Thierry
---
diff --cc init/main.c
index 7cc4b78,586cd33..379090f
--- a/init/main.c
+++ b/init/main.c
@@@ -75,7 -75,7 +75,8 @@@
#include <linux/blkdev.h>
#include <linux/elevator.h>
#include <linux/sched_clock.h>
+#include <linux/context_tracking.h>
+ #include <linux/random.h>
#include <asm/io.h>
#include <asm/bugs.h>
^ permalink raw reply [flat|nested] 20+ messages in thread
* linux-next: manual merge of the sh tree
2013-09-30 11:26 linux-next: manual merge of the bcon tree Thierry Reding
` (5 preceding siblings ...)
2013-09-30 11:26 ` linux-next: manual merge of the random tree Thierry Reding
@ 2013-09-30 11:26 ` Thierry Reding
2013-09-30 11:26 ` linux-next: manual merge of the tip tree Thierry Reding
` (2 subsequent siblings)
9 siblings, 0 replies; 20+ messages in thread
From: Thierry Reding @ 2013-09-30 11:26 UTC (permalink / raw)
To: Paul Mundt; +Cc: linux-sh, linux-next, linux-kernel
Today's linux-next merge of the sh tree got conflicts in
arch/sh/kernel/cpu/sh2a/Makefile
drivers/tty/serial/sh-sci.c
include/linux/serial_sci.h
I fixed them up (see below). Please check if the resolution looks correct.
Thanks,
Thierry
---
diff --cc arch/sh/kernel/cpu/sh2a/Makefile
index 990195d,130984c..92f0da4
--- a/arch/sh/kernel/cpu/sh2a/Makefile
+++ b/arch/sh/kernel/cpu/sh2a/Makefile
@@@ -21,4 -21,5 +21,5 @@@ pinmux-$(CONFIG_CPU_SUBTYPE_SH7203) :=
pinmux-$(CONFIG_CPU_SUBTYPE_SH7264) := pinmux-sh7264.o
pinmux-$(CONFIG_CPU_SUBTYPE_SH7269) := pinmux-sh7269.o
-obj-$(CONFIG_GENERIC_GPIO) += $(pinmux-y)
+obj-$(CONFIG_GPIOLIB) += $(pinmux-y)
+ obj-$(CONFIG_HAVE_HW_BREAKPOINT) += ubc.o
diff --cc drivers/tty/serial/sh-sci.c
index 5377502,e3847cc..d262c1f
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@@ -2481,9 -2502,20 +2588,20 @@@ static int sci_probe(struct platform_de
if (is_early_platform_device(dev))
return sci_probe_earlyprintk(dev);
+ if (dev->dev.of_node)
+ p = sci_parse_dt(dev, &dev_id);
+ else
- p = dev->dev.platform_data;
++ p = dev_get_platdata(&dev->dev);
+
+ if (!p) {
+ dev_err(&dev->dev, "no setup data supplied\n");
+ return -EINVAL;
+ }
+
+ sp = &sci_ports[dev_id];
platform_set_drvdata(dev, sp);
- ret = sci_probe_single(dev, dev->id, p, sp);
+ ret = sci_probe_single(dev, dev_id, p, sp);
if (ret)
return ret;
diff --cc include/linux/serial_sci.h
index 50fe651,857eec4..3dbdf7e
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@@ -16,7 -18,8 +18,9 @@@ enum
SCBRR_ALGO_3, /* (((clk * 2) + 16 * bps) / (16 * bps) - 1) */
SCBRR_ALGO_4, /* (((clk * 2) + 16 * bps) / (32 * bps) - 1) */
SCBRR_ALGO_5, /* (((clk * 1000 / 32) / bps) - 1) */
+ SCBRR_ALGO_6, /* HSCIF variable sample rate algorithm */
+
+ SCBRR_NR_ALGOS,
};
#define SCSCR_TIE (1 << 7)
^ permalink raw reply [flat|nested] 20+ messages in thread
* linux-next: manual merge of the tip tree
2013-09-30 11:26 linux-next: manual merge of the bcon tree Thierry Reding
` (6 preceding siblings ...)
2013-09-30 11:26 ` linux-next: manual merge of the sh tree Thierry Reding
@ 2013-09-30 11:26 ` Thierry Reding
2013-09-30 11:26 ` linux-next: manual merge of the vfs tree Thierry Reding
2013-09-30 11:26 ` linux-next: manual merge of the wireless-next tree Thierry Reding
9 siblings, 0 replies; 20+ messages in thread
From: Thierry Reding @ 2013-09-30 11:26 UTC (permalink / raw)
To: Thomas Gleixner, Ingo Molnar, H. Peter Anvin
Cc: x86, linux-next, linux-kernel
Today's linux-next merge of the tip tree got conflicts in
arch/h8300/include/asm/Kbuild
I just removed the file.
Thanks,
Thierry
^ permalink raw reply [flat|nested] 20+ messages in thread
* linux-next: manual merge of the vfs tree
2013-09-30 11:26 linux-next: manual merge of the bcon tree Thierry Reding
` (7 preceding siblings ...)
2013-09-30 11:26 ` linux-next: manual merge of the tip tree Thierry Reding
@ 2013-09-30 11:26 ` Thierry Reding
2013-09-30 11:26 ` linux-next: manual merge of the wireless-next tree Thierry Reding
9 siblings, 0 replies; 20+ messages in thread
From: Thierry Reding @ 2013-09-30 11:26 UTC (permalink / raw)
To: Alexander Viro; +Cc: linux-fsdevel, linux-next, linux-kernel
Today's linux-next merge of the vfs tree got conflicts in
fs/nfs/direct.c
fs/nfs/file.c
I fixed them up (see below). Please check if the resolution looks correct.
Thanks,
Thierry
---
diff --cc fs/nfs/direct.c
index 239c2fe,d71d66c..e83817c
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@@ -118,18 -117,26 +118,17 @@@ static inline int put_dreq(struct nfs_d
* @nr_segs: size of iovec array
*
* The presence of this routine in the address space ops vector means
- * the NFS client supports direct I/O. However, for most direct IO, we
- * shunt off direct read and write requests before the VFS gets them,
- * so this method is only ever called for swap.
+ * the NFS client supports direct I/O. However, we shunt off direct
+ * read and write requests before the VFS gets them, so this method
+ * should never be called.
*/
-ssize_t nfs_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, loff_t pos, unsigned long nr_segs)
+ssize_t nfs_direct_IO(int rw, struct kiocb *iocb, struct iov_iter *iter,
+ loff_t pos)
{
- dprintk("NFS: nfs_direct_IO (%s) off/no(%Ld/%lu) EINVAL\n",
- iocb->ki_filp->f_path.dentry->d_name.name,
- (long long) pos, iter->nr_segs);
-#ifndef CONFIG_NFS_SWAP
+ dprintk("NFS: nfs_direct_IO (%pD) off/no(%Ld/%lu) EINVAL\n",
+ iocb->ki_filp, (long long) pos, nr_segs);
return -EINVAL;
-#else
- VM_BUG_ON(iocb->ki_nbytes != PAGE_SIZE);
-
- if (rw == READ || rw == KERNEL_READ)
- return nfs_file_direct_read(iocb, iov, nr_segs, pos,
- rw == READ ? true : false);
- return nfs_file_direct_write(iocb, iov, nr_segs, pos,
- rw == WRITE ? true : false);
-#endif /* CONFIG_NFS_SWAP */
}
static void nfs_direct_release_pages(struct page **pages, unsigned int npages)
@@@ -1010,13 -905,11 +1009,11 @@@ ssize_t nfs_file_direct_read(struct kio
struct address_space *mapping = file->f_mapping;
size_t count;
- count = iov_length(iov, nr_segs);
+ count = iov_iter_count(iter);
nfs_add_stats(mapping->host, NFSIOS_DIRECTREADBYTES, count);
- dfprintk(FILE, "NFS: direct read(%s/%s, %zd@%Ld)\n",
- file->f_path.dentry->d_parent->d_name.name,
- file->f_path.dentry->d_name.name,
- count, (long long) pos);
+ dfprintk(FILE, "NFS: direct read(%pD2, %zd@%Ld)\n",
+ file, count, (long long) pos);
retval = 0;
if (!count)
@@@ -1065,13 -959,11 +1062,11 @@@ ssize_t nfs_file_direct_write(struct ki
struct address_space *mapping = file->f_mapping;
size_t count;
- count = iov_length(iov, nr_segs);
+ count = iov_iter_count(iter);
nfs_add_stats(mapping->host, NFSIOS_DIRECTWRITTENBYTES, count);
- dfprintk(FILE, "NFS: direct write(%s/%s, %zd@%Ld)\n",
- file->f_path.dentry->d_parent->d_name.name,
- file->f_path.dentry->d_name.name,
- count, (long long) pos);
+ dfprintk(FILE, "NFS: direct write(%pD2, %zd@%Ld)\n",
+ file, count, (long long) pos);
retval = generic_write_checks(file, &pos, &count, 0);
if (retval)
diff --cc fs/nfs/file.c
index 19ac4fd,e2fcacf..cb66d5f
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@@ -174,18 -165,18 +165,17 @@@ nfs_file_flush(struct file *file, fl_ow
EXPORT_SYMBOL_GPL(nfs_file_flush);
ssize_t
-nfs_file_read(struct kiocb *iocb, const struct iovec *iov,
- unsigned long nr_segs, loff_t pos)
+nfs_file_read_iter(struct kiocb *iocb, struct iov_iter *iter, loff_t pos)
{
- struct dentry * dentry = iocb->ki_filp->f_path.dentry;
- struct inode * inode = dentry->d_inode;
+ struct inode *inode = file_inode(iocb->ki_filp);
ssize_t result;
if (iocb->ki_filp->f_flags & O_DIRECT)
- return nfs_file_direct_read(iocb, iov, nr_segs, pos, true);
+ return nfs_file_direct_read(iocb, iter, pos);
- dprintk("NFS: read_iter(%s/%s, %lu@%lu)\n",
- dentry->d_parent->d_name.name, dentry->d_name.name,
- (unsigned long) iov_iter_count(iter), (unsigned long) pos);
- dprintk("NFS: read(%pD2, %lu@%lu)\n",
++ dprintk("NFS: read_iter(%pD2, %lu@%lu)\n",
+ iocb->ki_filp,
+ (unsigned long) iov_length(iov, nr_segs), (unsigned long) pos);
result = nfs_revalidate_mapping(inode, iocb->ki_filp->f_mapping);
if (!result) {
@@@ -655,25 -634,24 +633,24 @@@ static int nfs_need_sync_write(struct f
return 0;
}
-ssize_t nfs_file_write(struct kiocb *iocb, const struct iovec *iov,
- unsigned long nr_segs, loff_t pos)
+ssize_t nfs_file_write_iter(struct kiocb *iocb, struct iov_iter *iter,
+ loff_t pos)
{
- struct dentry * dentry = iocb->ki_filp->f_path.dentry;
- struct inode * inode = dentry->d_inode;
+ struct file *file = iocb->ki_filp;
+ struct inode *inode = file_inode(file);
unsigned long written = 0;
ssize_t result;
- size_t count = iov_length(iov, nr_segs);
+ size_t count = iov_iter_count(iter);
- result = nfs_key_timeout_notify(iocb->ki_filp, inode);
+ result = nfs_key_timeout_notify(file, inode);
if (result)
return result;
- if (iocb->ki_filp->f_flags & O_DIRECT)
+ if (file->f_flags & O_DIRECT)
- return nfs_file_direct_write(iocb, iov, nr_segs, pos, true);
+ return nfs_file_direct_write(iocb, iter, pos);
- dprintk("NFS: write_iter(%s/%s, %lu@%lld)\n",
- dentry->d_parent->d_name.name, dentry->d_name.name,
- (unsigned long) count, (long long) pos);
- dprintk("NFS: write(%pD2, %lu@%Ld)\n",
++ dprintk("NFS: write_iter(%pD2, %lu@%Ld)\n",
+ file, (unsigned long) count, (long long) pos);
result = -EBUSY;
if (IS_SWAPFILE(inode))
^ permalink raw reply [flat|nested] 20+ messages in thread
* linux-next: manual merge of the wireless-next tree
2013-09-30 11:26 linux-next: manual merge of the bcon tree Thierry Reding
` (8 preceding siblings ...)
2013-09-30 11:26 ` linux-next: manual merge of the vfs tree Thierry Reding
@ 2013-09-30 11:26 ` Thierry Reding
2013-09-30 14:26 ` Larry Finger
9 siblings, 1 reply; 20+ messages in thread
From: Thierry Reding @ 2013-09-30 11:26 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, linux-next, linux-kernel
Today's linux-next merge of the wireless-next tree got conflicts in
drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
I fixed it up (see below). Please check if the resolution looks correct.
Thanks,
Thierry
---
diff --cc drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
index f8973e5,80a0893..bb319b0
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
@@@ -217,10 -222,10 +215,9 @@@ void _rtl92ce_phy_lc_calibrate(struct i
void rtl92c_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain);
bool rtl92c_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
enum radio_path rfpath);
-bool rtl8192_phy_check_is_legal_rfpath(struct ieee80211_hw *hw,
- u32 rfpath);
+bool rtl8192_phy_check_is_legal_rfpath(struct ieee80211_hw *hw, u32 rfpath);
- bool rtl92c_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype);
bool rtl92ce_phy_set_rf_power_state(struct ieee80211_hw *hw,
- enum rf_pwrstate rfpwr_state);
+ enum rf_pwrstate rfpwr_state);
void rtl92ce_phy_set_rf_on(struct ieee80211_hw *hw);
bool rtl92c_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype);
void rtl92c_phy_set_io(struct ieee80211_hw *hw);
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: linux-next: manual merge of the drm-intel tree
2013-09-30 11:26 ` linux-next: manual merge of the drm-intel tree Thierry Reding
@ 2013-09-30 11:32 ` Daniel Vetter
0 siblings, 0 replies; 20+ messages in thread
From: Daniel Vetter @ 2013-09-30 11:32 UTC (permalink / raw)
To: Thierry Reding
Cc: intel-gfx, linux-next, Linux Kernel Mailing List, dri-devel
On Mon, Sep 30, 2013 at 1:26 PM, Thierry Reding
<thierry.reding@gmail.com> wrote:
> Today's linux-next merge of the drm-intel tree got conflicts in
>
> drivers/gpu/drm/i915/intel_display.c
>
> I fixed it up (see below). Please check if the resolution looks correct.
Looks good.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: linux-next: manual merge of the wireless-next tree
2013-09-30 11:26 ` linux-next: manual merge of the wireless-next tree Thierry Reding
@ 2013-09-30 14:26 ` Larry Finger
0 siblings, 0 replies; 20+ messages in thread
From: Larry Finger @ 2013-09-30 14:26 UTC (permalink / raw)
To: Thierry Reding; +Cc: John W. Linville, linux-wireless, linux-next, linux-kernel
On 09/30/2013 06:26 AM, Thierry Reding wrote:
> Today's linux-next merge of the wireless-next tree got conflicts in
>
> drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
>
> I fixed it up (see below). Please check if the resolution looks correct.
>
> Thanks,
> Thierry
> ---
> diff --cc drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
> index f8973e5,80a0893..bb319b0
> --- a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
> +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
> @@@ -217,10 -222,10 +215,9 @@@ void _rtl92ce_phy_lc_calibrate(struct i
> void rtl92c_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain);
> bool rtl92c_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
> enum radio_path rfpath);
> -bool rtl8192_phy_check_is_legal_rfpath(struct ieee80211_hw *hw,
> - u32 rfpath);
> +bool rtl8192_phy_check_is_legal_rfpath(struct ieee80211_hw *hw, u32 rfpath);
> - bool rtl92c_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype);
> bool rtl92ce_phy_set_rf_power_state(struct ieee80211_hw *hw,
> - enum rf_pwrstate rfpwr_state);
> + enum rf_pwrstate rfpwr_state);
> void rtl92ce_phy_set_rf_on(struct ieee80211_hw *hw);
> bool rtl92c_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype);
> void rtl92c_phy_set_io(struct ieee80211_hw *hw);
Thierry,
Yes, your fix is correct.
Larry
^ permalink raw reply [flat|nested] 20+ messages in thread
* linux-next: manual merge of the wireless-next tree
2013-10-22 15:10 ` linux-next: manual merge of the net-next tree Thierry Reding
@ 2013-10-22 15:10 ` Thierry Reding
0 siblings, 0 replies; 20+ messages in thread
From: Thierry Reding @ 2013-10-22 15:10 UTC (permalink / raw)
To: Joe Perches, Arend van Spriel, Matti Gottlieb, Eran Harary,
John W. Linville
Cc: linux-next, linux-kernel
Today's linux-next merge of the wireless-next tree got conflicts in
drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
drivers/net/wireless/iwlwifi/pcie/drv.c
caused by commits 9bd91f3 (brcm80211: Remove extern from function prototypes)
and a413e39 (brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg
support) as well as b499266 (iwlwifi: pcie: add new SKUs for 7000 & 3160 NIC
series) and c4aee08 (iwlwifi: Support 7265 devices).
I fixed them up (see below). Please verify that the resolution looks good.
Thanks,
Thierry
---
diff --cc drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index c9b06b4,1b034ea..bfadcb8
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@@ -206,17 -210,22 +210,18 @@@ int brcmf_sdio_regrw_helper(struct brcm
* Returns 0 or error code.
* NOTE: Async operation is not currently supported.
*/
-extern int
-brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
- uint flags, struct sk_buff_head *pktq);
-extern int
-brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
- uint flags, u8 *buf, uint nbytes);
-
-extern int
-brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
- uint flags, struct sk_buff *pkt);
-extern int
-brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
- uint flags, u8 *buf, uint nbytes);
-extern int
-brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
- uint flags, struct sk_buff_head *pktq, uint totlen);
+int brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
+ uint flags, struct sk_buff_head *pktq);
+int brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
+ uint flags, u8 *buf, uint nbytes);
+
+int brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
+ uint flags, struct sk_buff *pkt);
+int brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
+ uint flags, u8 *buf, uint nbytes);
+int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
- uint flags, struct sk_buff_head *pktq);
++ uint flags, struct sk_buff_head *pktq,
++ uint totlen);
/* Flags bits */
diff --cc drivers/net/wireless/iwlwifi/pcie/drv.c
index 26108a1,ddf15e1..941c0c8
--- a/drivers/net/wireless/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/iwlwifi/pcie/drv.c
@@@ -268,12 -258,10 +268,12 @@@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_c
#endif /* CONFIG_IWLDVM */
#if IS_ENABLED(CONFIG_IWLMVM)
- /* 7000 Series */
+ /* 7260 Series */
{IWL_PCI_DEVICE(0x08B1, 0x4070, iwl7260_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x08B1, 0x4072, iwl7260_2ac_cfg)},
{IWL_PCI_DEVICE(0x08B1, 0x4170, iwl7260_2ac_cfg)},
{IWL_PCI_DEVICE(0x08B1, 0x4060, iwl7260_2n_cfg)},
+ {IWL_PCI_DEVICE(0x08B1, 0x406A, iwl7260_2n_cfg)},
{IWL_PCI_DEVICE(0x08B1, 0x4160, iwl7260_2n_cfg)},
{IWL_PCI_DEVICE(0x08B1, 0x4062, iwl7260_n_cfg)},
{IWL_PCI_DEVICE(0x08B1, 0x4162, iwl7260_n_cfg)},
@@@ -349,7 -308,9 +349,10 @@@
{IWL_PCI_DEVICE(0x08B3, 0x8062, iwl3160_n_cfg)},
{IWL_PCI_DEVICE(0x08B4, 0x8270, iwl3160_2ac_cfg)},
{IWL_PCI_DEVICE(0x08B3, 0x8470, iwl3160_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x08B3, 0x8570, iwl3160_2ac_cfg)},
+
+ /* 7265 Series */
+ {IWL_PCI_DEVICE(0x095A, 0x5010, iwl7265_2ac_cfg)},
#endif /* CONFIG_IWLMVM */
{0}
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: linux-next: manual merge of the wireless-next tree
2013-10-07 16:17 ` Joe Perches
@ 2013-10-07 17:16 ` Larry Finger
0 siblings, 0 replies; 20+ messages in thread
From: Larry Finger @ 2013-10-07 17:16 UTC (permalink / raw)
To: Joe Perches
Cc: Thierry Reding, John W. Linville, Arend van Spriel, linux-next,
linux-kernel
On 10/07/2013 11:17 AM, Joe Perches wrote:
>
> Or maybe John could merge changes from net-next
> into wireless-next a bit more often.
I'm not sure that John pulls from net-next. My understanding of the work flow is
wireless-next => net-next => linux-next => mainline => wireless-next...
Larry
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: linux-next: manual merge of the wireless-next tree
2013-10-07 16:09 ` Larry Finger
@ 2013-10-07 16:17 ` Joe Perches
2013-10-07 17:16 ` Larry Finger
0 siblings, 1 reply; 20+ messages in thread
From: Joe Perches @ 2013-10-07 16:17 UTC (permalink / raw)
To: Larry Finger
Cc: Thierry Reding, John W. Linville, Arend van Spriel, linux-next,
linux-kernel
On Mon, 2013-10-07 at 11:09 -0500, Larry Finger wrote:
> On 10/07/2013 10:56 AM, Joe Perches wrote:
> > On Mon, 2013-10-07 at 10:48 -0500, Larry Finger wrote:
> >> On 10/07/2013 10:18 AM, Thierry Reding wrote:
> >>> Today's linux-next merge of the wireless-next tree got conflicts in:
> >>>
> >>> drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
> >>> drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
> >>> drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
> >>> drivers/net/wireless/rtlwifi/rtl8192de/phy.h
> >>> drivers/net/wireless/rtlwifi/rtl8723ae/phy.h
> > []
> >> Yes, the patches for rtlwifi problems are correct. All of these problems would
> >> have been avoided if changes to wireless drivers were sent to the wireless tree
> >> rather than direct submission to net-next!!!!
> >
> > They were and you acked it.
> > https://lkml.org/lkml/2013/9/25/589
> >
> > Who picks it up first and applies it is
> > not in my domain.
>
> Fair enough. I should have asked DaveM to let John apply those changes.
Or maybe John could merge changes from net-next
into wireless-next a bit more often.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: linux-next: manual merge of the wireless-next tree
2013-10-07 15:56 ` Joe Perches
@ 2013-10-07 16:09 ` Larry Finger
2013-10-07 16:17 ` Joe Perches
0 siblings, 1 reply; 20+ messages in thread
From: Larry Finger @ 2013-10-07 16:09 UTC (permalink / raw)
To: Joe Perches
Cc: Thierry Reding, John W. Linville, Arend van Spriel, linux-next,
linux-kernel
On 10/07/2013 10:56 AM, Joe Perches wrote:
> On Mon, 2013-10-07 at 10:48 -0500, Larry Finger wrote:
>> On 10/07/2013 10:18 AM, Thierry Reding wrote:
>>> Today's linux-next merge of the wireless-next tree got conflicts in:
>>>
>>> drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
>>> drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
>>> drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
>>> drivers/net/wireless/rtlwifi/rtl8192de/phy.h
>>> drivers/net/wireless/rtlwifi/rtl8723ae/phy.h
> []
>> Yes, the patches for rtlwifi problems are correct. All of these problems would
>> have been avoided if changes to wireless drivers were sent to the wireless tree
>> rather than direct submission to net-next!!!!
>
> They were and you acked it.
> https://lkml.org/lkml/2013/9/25/589
>
> Who picks it up first and applies it is
> not in my domain.
Fair enough. I should have asked DaveM to let John apply those changes.
Larry
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: linux-next: manual merge of the wireless-next tree
2013-10-07 15:48 ` Larry Finger
@ 2013-10-07 15:56 ` Joe Perches
2013-10-07 16:09 ` Larry Finger
0 siblings, 1 reply; 20+ messages in thread
From: Joe Perches @ 2013-10-07 15:56 UTC (permalink / raw)
To: Larry Finger
Cc: Thierry Reding, John W. Linville, Arend van Spriel, linux-next,
linux-kernel
On Mon, 2013-10-07 at 10:48 -0500, Larry Finger wrote:
> On 10/07/2013 10:18 AM, Thierry Reding wrote:
> > Today's linux-next merge of the wireless-next tree got conflicts in:
> >
> > drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
> > drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
> > drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
> > drivers/net/wireless/rtlwifi/rtl8192de/phy.h
> > drivers/net/wireless/rtlwifi/rtl8723ae/phy.h
[]
> Yes, the patches for rtlwifi problems are correct. All of these problems would
> have been avoided if changes to wireless drivers were sent to the wireless tree
> rather than direct submission to net-next!!!!
They were and you acked it.
https://lkml.org/lkml/2013/9/25/589
Who picks it up first and applies it is
not in my domain.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: linux-next: manual merge of the wireless-next tree
2013-10-07 15:18 ` linux-next: manual merge of the wireless-next tree Thierry Reding
@ 2013-10-07 15:48 ` Larry Finger
2013-10-07 15:56 ` Joe Perches
0 siblings, 1 reply; 20+ messages in thread
From: Larry Finger @ 2013-10-07 15:48 UTC (permalink / raw)
To: Thierry Reding, John W. Linville, Arend van Spriel, Joe Perches
Cc: linux-next, linux-kernel
On 10/07/2013 10:18 AM, Thierry Reding wrote:
> Today's linux-next merge of the wireless-next tree got conflicts in:
>
> drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
> drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
> drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
> drivers/net/wireless/rtlwifi/rtl8192de/phy.h
> drivers/net/wireless/rtlwifi/rtl8723ae/phy.h
>
> caused by commits 05f3820 (brcmfmac: rework rx path bus interface) and
> 9bd91f3 (brcm80211: Remove extern from function prototypes) as well as
> commits d41200a (rtlwifi: rtl8188ee: Convert driver to use new
> rtl_phy_scan_operation_backup() routine), 3764eb7 (rtlwifi: rtl8192ce:
> Convert driver to use new rtl_phy_scan_operation_backup() routine),
> 6483033 (rtlwifi: rtl8192ce: Convert driver to use new
> rtl_phy_scan_operation_backup() routine), 3fc0165 (rtlwifi: rtl8723ae:
> Convert driver to use new rtl_phy_scan_operation_backup() routine) and
> a958df5 (rtlwifi: Remove extern from function prototypes).
>
> I fixed them up (see below). Please verify that the resolution looks
> correct.
>
> Thanks,
> Thierry
> ---
> diff --cc drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
> index 7f1340d,200ee9b..a6eb09e
> --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
> +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
> @@@ -132,34 -132,34 +132,34 @@@ struct pktq *brcmf_bus_gettxq(struct br
> * interface functions from common layer
> */
>
> -extern bool brcmf_c_prec_enq(struct device *dev, struct pktq *q,
> - struct sk_buff *pkt, int prec);
> +bool brcmf_c_prec_enq(struct device *dev, struct pktq *q, struct sk_buff *pkt,
> + int prec);
>
> /* Receive frame for delivery to OS. Callee disposes of rxp. */
> - void brcmf_rx_frames(struct device *dev, struct sk_buff_head *rxlist);
> -extern void brcmf_rx_frame(struct device *dev, struct sk_buff *rxp);
> ++void brcmf_rx_frame(struct device *dev, struct sk_buff *rxp);
>
> /* Indication from bus module regarding presence/insertion of dongle. */
> -extern int brcmf_attach(uint bus_hdrlen, struct device *dev);
> +int brcmf_attach(uint bus_hdrlen, struct device *dev);
> /* Indication from bus module regarding removal/absence of dongle */
> -extern void brcmf_detach(struct device *dev);
> +void brcmf_detach(struct device *dev);
> /* Indication from bus module that dongle should be reset */
> -extern void brcmf_dev_reset(struct device *dev);
> +void brcmf_dev_reset(struct device *dev);
> /* Indication from bus module to change flow-control state */
> -extern void brcmf_txflowblock(struct device *dev, bool state);
> +void brcmf_txflowblock(struct device *dev, bool state);
>
> /* Notify the bus has transferred the tx packet to firmware */
> -extern void brcmf_txcomplete(struct device *dev, struct sk_buff *txp,
> - bool success);
> +void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success);
>
> -extern int brcmf_bus_start(struct device *dev);
> +int brcmf_bus_start(struct device *dev);
>
> #ifdef CONFIG_BRCMFMAC_SDIO
> -extern void brcmf_sdio_exit(void);
> -extern void brcmf_sdio_init(void);
> +void brcmf_sdio_exit(void);
> +void brcmf_sdio_init(void);
> +void brcmf_sdio_register(void);
> #endif
> #ifdef CONFIG_BRCMFMAC_USB
> -extern void brcmf_usb_exit(void);
> -extern void brcmf_usb_init(void);
> +void brcmf_usb_exit(void);
> +void brcmf_usb_register(void);
> #endif
>
> #endif /* _BRCMF_BUS_H_ */
> diff --cc drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
> index 71ddf4f,d4545f0..8e1f1be
> --- a/drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
> +++ b/drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
> @@@ -200,26 -200,29 +200,25 @@@ enum _ANT_DIV_TYPE
> CGCS_RX_SW_ANTDIV = 0x05,
> };
>
> -extern u32 rtl88e_phy_query_bb_reg(struct ieee80211_hw *hw,
> - u32 regaddr, u32 bitmask);
> -extern void rtl88e_phy_set_bb_reg(struct ieee80211_hw *hw,
> - u32 regaddr, u32 bitmask, u32 data);
> -extern u32 rtl88e_phy_query_rf_reg(struct ieee80211_hw *hw,
> - enum radio_path rfpath, u32 regaddr,
> - u32 bitmask);
> -extern void rtl88e_phy_set_rf_reg(struct ieee80211_hw *hw,
> - enum radio_path rfpath, u32 regaddr,
> - u32 bitmask, u32 data);
> -extern bool rtl88e_phy_mac_config(struct ieee80211_hw *hw);
> -extern bool rtl88e_phy_bb_config(struct ieee80211_hw *hw);
> -extern bool rtl88e_phy_rf_config(struct ieee80211_hw *hw);
> -extern void rtl88e_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
> -extern void rtl88e_phy_get_txpower_level(struct ieee80211_hw *hw,
> - long *powerlevel);
> -extern void rtl88e_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel);
> -extern void rtl88e_phy_set_bw_mode_callback(struct ieee80211_hw *hw);
> -extern void rtl88e_phy_set_bw_mode(struct ieee80211_hw *hw,
> - enum nl80211_channel_type ch_type);
> -extern void rtl88e_phy_sw_chnl_callback(struct ieee80211_hw *hw);
> -extern u8 rtl88e_phy_sw_chnl(struct ieee80211_hw *hw);
> -extern void rtl88e_phy_iq_calibrate(struct ieee80211_hw *hw, bool b_recovery);
> +u32 rtl88e_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask);
> +void rtl88e_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask,
> + u32 data);
> +u32 rtl88e_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
> + u32 regaddr, u32 bitmask);
> +void rtl88e_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
> + u32 regaddr, u32 bitmask, u32 data);
> +bool rtl88e_phy_mac_config(struct ieee80211_hw *hw);
> +bool rtl88e_phy_bb_config(struct ieee80211_hw *hw);
> +bool rtl88e_phy_rf_config(struct ieee80211_hw *hw);
> +void rtl88e_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
> +void rtl88e_phy_get_txpower_level(struct ieee80211_hw *hw, long *powerlevel);
> +void rtl88e_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel);
> - void rtl88e_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation);
> +void rtl88e_phy_set_bw_mode_callback(struct ieee80211_hw *hw);
> +void rtl88e_phy_set_bw_mode(struct ieee80211_hw *hw,
> + enum nl80211_channel_type ch_type);
> +void rtl88e_phy_sw_chnl_callback(struct ieee80211_hw *hw);
> +u8 rtl88e_phy_sw_chnl(struct ieee80211_hw *hw);
> +void rtl88e_phy_iq_calibrate(struct ieee80211_hw *hw, bool b_recovery);
> void rtl88e_phy_lc_calibrate(struct ieee80211_hw *hw);
> void rtl88e_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain);
> bool rtl88e_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
> diff --cc drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
> index f8973e5,aeb268b..ff32b5b
> --- a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
> +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
> @@@ -199,14 -200,15 +197,13 @@@ bool rtl92c_phy_mac_config(struct ieee8
> bool rtl92ce_phy_bb_config(struct ieee80211_hw *hw);
> bool rtl92c_phy_rf_config(struct ieee80211_hw *hw);
> bool rtl92c_phy_config_rf_with_feaderfile(struct ieee80211_hw *hw,
> - enum radio_path rfpath);
> + enum radio_path rfpath);
> void rtl92c_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
> -void rtl92c_phy_get_txpower_level(struct ieee80211_hw *hw,
> - long *powerlevel);
> +void rtl92c_phy_get_txpower_level(struct ieee80211_hw *hw, long *powerlevel);
> void rtl92c_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel);
> -bool rtl92c_phy_update_txpower_dbm(struct ieee80211_hw *hw,
> - long power_indbm);
> +bool rtl92c_phy_update_txpower_dbm(struct ieee80211_hw *hw, long power_indbm);
> - void rtl92c_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation);
> void rtl92c_phy_set_bw_mode(struct ieee80211_hw *hw,
> - enum nl80211_channel_type ch_type);
> + enum nl80211_channel_type ch_type);
> void rtl92c_phy_sw_chnl_callback(struct ieee80211_hw *hw);
> u8 rtl92c_phy_sw_chnl(struct ieee80211_hw *hw);
> void rtl92c_phy_iq_calibrate(struct ieee80211_hw *hw, bool b_recovery);
> @@@ -217,10 -220,10 +214,9 @@@ void _rtl92ce_phy_lc_calibrate(struct i
> void rtl92c_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain);
> bool rtl92c_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
> enum radio_path rfpath);
> -bool rtl8192_phy_check_is_legal_rfpath(struct ieee80211_hw *hw,
> - u32 rfpath);
> +bool rtl8192_phy_check_is_legal_rfpath(struct ieee80211_hw *hw, u32 rfpath);
> - bool rtl92c_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype);
> bool rtl92ce_phy_set_rf_power_state(struct ieee80211_hw *hw,
> - enum rf_pwrstate rfpwr_state);
> + enum rf_pwrstate rfpwr_state);
> void rtl92ce_phy_set_rf_on(struct ieee80211_hw *hw);
> bool rtl92c_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype);
> void rtl92c_phy_set_io(struct ieee80211_hw *hw);
> diff --cc drivers/net/wireless/rtlwifi/rtl8192de/phy.h
> index 0f993f4,bef3040..33df0d1c
> --- a/drivers/net/wireless/rtlwifi/rtl8192de/phy.h
> +++ b/drivers/net/wireless/rtlwifi/rtl8192de/phy.h
> @@@ -127,24 -125,26 +125,23 @@@ static inline void rtl92d_release_cckan
> *flag);
> }
>
> -extern u32 rtl92d_phy_query_bb_reg(struct ieee80211_hw *hw,
> - u32 regaddr, u32 bitmask);
> -extern void rtl92d_phy_set_bb_reg(struct ieee80211_hw *hw,
> - u32 regaddr, u32 bitmask, u32 data);
> -extern u32 rtl92d_phy_query_rf_reg(struct ieee80211_hw *hw,
> - enum radio_path rfpath, u32 regaddr,
> - u32 bitmask);
> -extern void rtl92d_phy_set_rf_reg(struct ieee80211_hw *hw,
> - enum radio_path rfpath, u32 regaddr,
> - u32 bitmask, u32 data);
> -extern bool rtl92d_phy_mac_config(struct ieee80211_hw *hw);
> -extern bool rtl92d_phy_bb_config(struct ieee80211_hw *hw);
> -extern bool rtl92d_phy_rf_config(struct ieee80211_hw *hw);
> -extern bool rtl92c_phy_config_rf_with_feaderfile(struct ieee80211_hw *hw,
> - enum radio_path rfpath);
> -extern void rtl92d_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
> -extern void rtl92d_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel);
> -extern void rtl92d_phy_set_bw_mode(struct ieee80211_hw *hw,
> - enum nl80211_channel_type ch_type);
> -extern u8 rtl92d_phy_sw_chnl(struct ieee80211_hw *hw);
> +u32 rtl92d_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask);
> +void rtl92d_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask,
> + u32 data);
> +u32 rtl92d_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
> + u32 regaddr, u32 bitmask);
> +void rtl92d_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
> + u32 regaddr, u32 bitmask, u32 data);
> +bool rtl92d_phy_mac_config(struct ieee80211_hw *hw);
> +bool rtl92d_phy_bb_config(struct ieee80211_hw *hw);
> +bool rtl92d_phy_rf_config(struct ieee80211_hw *hw);
> +bool rtl92c_phy_config_rf_with_feaderfile(struct ieee80211_hw *hw,
> + enum radio_path rfpath);
> +void rtl92d_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
> +void rtl92d_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel);
> - void rtl92d_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation);
> +void rtl92d_phy_set_bw_mode(struct ieee80211_hw *hw,
> + enum nl80211_channel_type ch_type);
> +u8 rtl92d_phy_sw_chnl(struct ieee80211_hw *hw);
> bool rtl92d_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
> enum rf_content content,
> enum radio_path rfpath);
> diff --cc drivers/net/wireless/rtlwifi/rtl8723ae/phy.h
> index bbb950d,3d8f9e3..c3adc72
> --- a/drivers/net/wireless/rtlwifi/rtl8723ae/phy.h
> +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/phy.h
> @@@ -183,33 -183,34 +183,32 @@@ struct tx_power_struct
> u32 mcs_original_offset[4][16];
> };
>
> -extern u32 rtl8723ae_phy_query_bb_reg(struct ieee80211_hw *hw,
> - u32 regaddr, u32 bitmask);
> -extern void rtl8723ae_phy_set_bb_reg(struct ieee80211_hw *hw,
> - u32 regaddr, u32 bitmask, u32 data);
> -extern u32 rtl8723ae_phy_query_rf_reg(struct ieee80211_hw *hw,
> - enum radio_path rfpath, u32 regaddr,
> - u32 bitmask);
> -extern void rtl8723ae_phy_set_rf_reg(struct ieee80211_hw *hw,
> - enum radio_path rfpath, u32 regaddr,
> - u32 bitmask, u32 data);
> -extern bool rtl8723ae_phy_mac_config(struct ieee80211_hw *hw);
> -extern bool rtl8723ae_phy_bb_config(struct ieee80211_hw *hw);
> -extern bool rtl8723ae_phy_rf_config(struct ieee80211_hw *hw);
> -extern bool rtl92c_phy_config_rf_with_feaderfile(struct ieee80211_hw *hw,
> - enum radio_path rfpath);
> -extern void rtl8723ae_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
> -extern void rtl8723ae_phy_get_txpower_level(struct ieee80211_hw *hw,
> - long *powerlevel);
> -extern void rtl8723ae_phy_set_txpower_level(struct ieee80211_hw *hw,
> - u8 channel);
> -extern bool rtl8723ae_phy_update_txpower_dbm(struct ieee80211_hw *hw,
> - long power_indbm);
> -extern void rtl8723ae_phy_set_bw_mode_callback(struct ieee80211_hw *hw);
> -extern void rtl8723ae_phy_set_bw_mode(struct ieee80211_hw *hw,
> - enum nl80211_channel_type ch_type);
> -extern void rtl8723ae_phy_sw_chnl_callback(struct ieee80211_hw *hw);
> -extern u8 rtl8723ae_phy_sw_chnl(struct ieee80211_hw *hw);
> -extern void rtl8723ae_phy_iq_calibrate(struct ieee80211_hw *hw, bool recovery);
> +u32 rtl8723ae_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr,
> + u32 bitmask);
> +void rtl8723ae_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask,
> + u32 data);
> +u32 rtl8723ae_phy_query_rf_reg(struct ieee80211_hw *hw,
> + enum radio_path rfpath, u32 regaddr,
> + u32 bitmask);
> +void rtl8723ae_phy_set_rf_reg(struct ieee80211_hw *hw,
> + enum radio_path rfpath, u32 regaddr, u32 bitmask,
> + u32 data);
> +bool rtl8723ae_phy_mac_config(struct ieee80211_hw *hw);
> +bool rtl8723ae_phy_bb_config(struct ieee80211_hw *hw);
> +bool rtl8723ae_phy_rf_config(struct ieee80211_hw *hw);
> +bool rtl92c_phy_config_rf_with_feaderfile(struct ieee80211_hw *hw,
> + enum radio_path rfpath);
> +void rtl8723ae_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
> +void rtl8723ae_phy_get_txpower_level(struct ieee80211_hw *hw, long *powerlevel);
> +void rtl8723ae_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel);
> +bool rtl8723ae_phy_update_txpower_dbm(struct ieee80211_hw *hw,
> + long power_indbm);
> - void rtl8723ae_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation);
> +void rtl8723ae_phy_set_bw_mode_callback(struct ieee80211_hw *hw);
> +void rtl8723ae_phy_set_bw_mode(struct ieee80211_hw *hw,
> + enum nl80211_channel_type ch_type);
> +void rtl8723ae_phy_sw_chnl_callback(struct ieee80211_hw *hw);
> +u8 rtl8723ae_phy_sw_chnl(struct ieee80211_hw *hw);
> +void rtl8723ae_phy_iq_calibrate(struct ieee80211_hw *hw, bool recovery);
> void rtl8723ae_phy_lc_calibrate(struct ieee80211_hw *hw);
> void rtl8723ae_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain);
> bool rtl8723ae_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
Yes, the patches for rtlwifi problems are correct. All of these problems would
have been avoided if changes to wireless drivers were sent to the wireless tree
rather than direct submission to net-next!!!!
Larry
^ permalink raw reply [flat|nested] 20+ messages in thread
* linux-next: manual merge of the wireless-next tree
2013-10-07 15:18 linux-next: Tree for Oct 7 Thierry Reding
@ 2013-10-07 15:18 ` Thierry Reding
2013-10-07 15:48 ` Larry Finger
0 siblings, 1 reply; 20+ messages in thread
From: Thierry Reding @ 2013-10-07 15:18 UTC (permalink / raw)
To: John W. Linville, Arend van Spriel, Joe Perches, Larry Finger
Cc: linux-next, linux-kernel
Today's linux-next merge of the wireless-next tree got conflicts in:
drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
drivers/net/wireless/rtlwifi/rtl8192de/phy.h
drivers/net/wireless/rtlwifi/rtl8723ae/phy.h
caused by commits 05f3820 (brcmfmac: rework rx path bus interface) and
9bd91f3 (brcm80211: Remove extern from function prototypes) as well as
commits d41200a (rtlwifi: rtl8188ee: Convert driver to use new
rtl_phy_scan_operation_backup() routine), 3764eb7 (rtlwifi: rtl8192ce:
Convert driver to use new rtl_phy_scan_operation_backup() routine),
6483033 (rtlwifi: rtl8192ce: Convert driver to use new
rtl_phy_scan_operation_backup() routine), 3fc0165 (rtlwifi: rtl8723ae:
Convert driver to use new rtl_phy_scan_operation_backup() routine) and
a958df5 (rtlwifi: Remove extern from function prototypes).
I fixed them up (see below). Please verify that the resolution looks
correct.
Thanks,
Thierry
---
diff --cc drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
index 7f1340d,200ee9b..a6eb09e
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
@@@ -132,34 -132,34 +132,34 @@@ struct pktq *brcmf_bus_gettxq(struct br
* interface functions from common layer
*/
-extern bool brcmf_c_prec_enq(struct device *dev, struct pktq *q,
- struct sk_buff *pkt, int prec);
+bool brcmf_c_prec_enq(struct device *dev, struct pktq *q, struct sk_buff *pkt,
+ int prec);
/* Receive frame for delivery to OS. Callee disposes of rxp. */
- void brcmf_rx_frames(struct device *dev, struct sk_buff_head *rxlist);
-extern void brcmf_rx_frame(struct device *dev, struct sk_buff *rxp);
++void brcmf_rx_frame(struct device *dev, struct sk_buff *rxp);
/* Indication from bus module regarding presence/insertion of dongle. */
-extern int brcmf_attach(uint bus_hdrlen, struct device *dev);
+int brcmf_attach(uint bus_hdrlen, struct device *dev);
/* Indication from bus module regarding removal/absence of dongle */
-extern void brcmf_detach(struct device *dev);
+void brcmf_detach(struct device *dev);
/* Indication from bus module that dongle should be reset */
-extern void brcmf_dev_reset(struct device *dev);
+void brcmf_dev_reset(struct device *dev);
/* Indication from bus module to change flow-control state */
-extern void brcmf_txflowblock(struct device *dev, bool state);
+void brcmf_txflowblock(struct device *dev, bool state);
/* Notify the bus has transferred the tx packet to firmware */
-extern void brcmf_txcomplete(struct device *dev, struct sk_buff *txp,
- bool success);
+void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success);
-extern int brcmf_bus_start(struct device *dev);
+int brcmf_bus_start(struct device *dev);
#ifdef CONFIG_BRCMFMAC_SDIO
-extern void brcmf_sdio_exit(void);
-extern void brcmf_sdio_init(void);
+void brcmf_sdio_exit(void);
+void brcmf_sdio_init(void);
+void brcmf_sdio_register(void);
#endif
#ifdef CONFIG_BRCMFMAC_USB
-extern void brcmf_usb_exit(void);
-extern void brcmf_usb_init(void);
+void brcmf_usb_exit(void);
+void brcmf_usb_register(void);
#endif
#endif /* _BRCMF_BUS_H_ */
diff --cc drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
index 71ddf4f,d4545f0..8e1f1be
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
@@@ -200,26 -200,29 +200,25 @@@ enum _ANT_DIV_TYPE
CGCS_RX_SW_ANTDIV = 0x05,
};
-extern u32 rtl88e_phy_query_bb_reg(struct ieee80211_hw *hw,
- u32 regaddr, u32 bitmask);
-extern void rtl88e_phy_set_bb_reg(struct ieee80211_hw *hw,
- u32 regaddr, u32 bitmask, u32 data);
-extern u32 rtl88e_phy_query_rf_reg(struct ieee80211_hw *hw,
- enum radio_path rfpath, u32 regaddr,
- u32 bitmask);
-extern void rtl88e_phy_set_rf_reg(struct ieee80211_hw *hw,
- enum radio_path rfpath, u32 regaddr,
- u32 bitmask, u32 data);
-extern bool rtl88e_phy_mac_config(struct ieee80211_hw *hw);
-extern bool rtl88e_phy_bb_config(struct ieee80211_hw *hw);
-extern bool rtl88e_phy_rf_config(struct ieee80211_hw *hw);
-extern void rtl88e_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
-extern void rtl88e_phy_get_txpower_level(struct ieee80211_hw *hw,
- long *powerlevel);
-extern void rtl88e_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel);
-extern void rtl88e_phy_set_bw_mode_callback(struct ieee80211_hw *hw);
-extern void rtl88e_phy_set_bw_mode(struct ieee80211_hw *hw,
- enum nl80211_channel_type ch_type);
-extern void rtl88e_phy_sw_chnl_callback(struct ieee80211_hw *hw);
-extern u8 rtl88e_phy_sw_chnl(struct ieee80211_hw *hw);
-extern void rtl88e_phy_iq_calibrate(struct ieee80211_hw *hw, bool b_recovery);
+u32 rtl88e_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask);
+void rtl88e_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask,
+ u32 data);
+u32 rtl88e_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+ u32 regaddr, u32 bitmask);
+void rtl88e_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+ u32 regaddr, u32 bitmask, u32 data);
+bool rtl88e_phy_mac_config(struct ieee80211_hw *hw);
+bool rtl88e_phy_bb_config(struct ieee80211_hw *hw);
+bool rtl88e_phy_rf_config(struct ieee80211_hw *hw);
+void rtl88e_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
+void rtl88e_phy_get_txpower_level(struct ieee80211_hw *hw, long *powerlevel);
+void rtl88e_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel);
- void rtl88e_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation);
+void rtl88e_phy_set_bw_mode_callback(struct ieee80211_hw *hw);
+void rtl88e_phy_set_bw_mode(struct ieee80211_hw *hw,
+ enum nl80211_channel_type ch_type);
+void rtl88e_phy_sw_chnl_callback(struct ieee80211_hw *hw);
+u8 rtl88e_phy_sw_chnl(struct ieee80211_hw *hw);
+void rtl88e_phy_iq_calibrate(struct ieee80211_hw *hw, bool b_recovery);
void rtl88e_phy_lc_calibrate(struct ieee80211_hw *hw);
void rtl88e_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain);
bool rtl88e_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
diff --cc drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
index f8973e5,aeb268b..ff32b5b
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
@@@ -199,14 -200,15 +197,13 @@@ bool rtl92c_phy_mac_config(struct ieee8
bool rtl92ce_phy_bb_config(struct ieee80211_hw *hw);
bool rtl92c_phy_rf_config(struct ieee80211_hw *hw);
bool rtl92c_phy_config_rf_with_feaderfile(struct ieee80211_hw *hw,
- enum radio_path rfpath);
+ enum radio_path rfpath);
void rtl92c_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
-void rtl92c_phy_get_txpower_level(struct ieee80211_hw *hw,
- long *powerlevel);
+void rtl92c_phy_get_txpower_level(struct ieee80211_hw *hw, long *powerlevel);
void rtl92c_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel);
-bool rtl92c_phy_update_txpower_dbm(struct ieee80211_hw *hw,
- long power_indbm);
+bool rtl92c_phy_update_txpower_dbm(struct ieee80211_hw *hw, long power_indbm);
- void rtl92c_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation);
void rtl92c_phy_set_bw_mode(struct ieee80211_hw *hw,
- enum nl80211_channel_type ch_type);
+ enum nl80211_channel_type ch_type);
void rtl92c_phy_sw_chnl_callback(struct ieee80211_hw *hw);
u8 rtl92c_phy_sw_chnl(struct ieee80211_hw *hw);
void rtl92c_phy_iq_calibrate(struct ieee80211_hw *hw, bool b_recovery);
@@@ -217,10 -220,10 +214,9 @@@ void _rtl92ce_phy_lc_calibrate(struct i
void rtl92c_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain);
bool rtl92c_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
enum radio_path rfpath);
-bool rtl8192_phy_check_is_legal_rfpath(struct ieee80211_hw *hw,
- u32 rfpath);
+bool rtl8192_phy_check_is_legal_rfpath(struct ieee80211_hw *hw, u32 rfpath);
- bool rtl92c_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype);
bool rtl92ce_phy_set_rf_power_state(struct ieee80211_hw *hw,
- enum rf_pwrstate rfpwr_state);
+ enum rf_pwrstate rfpwr_state);
void rtl92ce_phy_set_rf_on(struct ieee80211_hw *hw);
bool rtl92c_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype);
void rtl92c_phy_set_io(struct ieee80211_hw *hw);
diff --cc drivers/net/wireless/rtlwifi/rtl8192de/phy.h
index 0f993f4,bef3040..33df0d1c
--- a/drivers/net/wireless/rtlwifi/rtl8192de/phy.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/phy.h
@@@ -127,24 -125,26 +125,23 @@@ static inline void rtl92d_release_cckan
*flag);
}
-extern u32 rtl92d_phy_query_bb_reg(struct ieee80211_hw *hw,
- u32 regaddr, u32 bitmask);
-extern void rtl92d_phy_set_bb_reg(struct ieee80211_hw *hw,
- u32 regaddr, u32 bitmask, u32 data);
-extern u32 rtl92d_phy_query_rf_reg(struct ieee80211_hw *hw,
- enum radio_path rfpath, u32 regaddr,
- u32 bitmask);
-extern void rtl92d_phy_set_rf_reg(struct ieee80211_hw *hw,
- enum radio_path rfpath, u32 regaddr,
- u32 bitmask, u32 data);
-extern bool rtl92d_phy_mac_config(struct ieee80211_hw *hw);
-extern bool rtl92d_phy_bb_config(struct ieee80211_hw *hw);
-extern bool rtl92d_phy_rf_config(struct ieee80211_hw *hw);
-extern bool rtl92c_phy_config_rf_with_feaderfile(struct ieee80211_hw *hw,
- enum radio_path rfpath);
-extern void rtl92d_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
-extern void rtl92d_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel);
-extern void rtl92d_phy_set_bw_mode(struct ieee80211_hw *hw,
- enum nl80211_channel_type ch_type);
-extern u8 rtl92d_phy_sw_chnl(struct ieee80211_hw *hw);
+u32 rtl92d_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask);
+void rtl92d_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask,
+ u32 data);
+u32 rtl92d_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+ u32 regaddr, u32 bitmask);
+void rtl92d_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+ u32 regaddr, u32 bitmask, u32 data);
+bool rtl92d_phy_mac_config(struct ieee80211_hw *hw);
+bool rtl92d_phy_bb_config(struct ieee80211_hw *hw);
+bool rtl92d_phy_rf_config(struct ieee80211_hw *hw);
+bool rtl92c_phy_config_rf_with_feaderfile(struct ieee80211_hw *hw,
+ enum radio_path rfpath);
+void rtl92d_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
+void rtl92d_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel);
- void rtl92d_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation);
+void rtl92d_phy_set_bw_mode(struct ieee80211_hw *hw,
+ enum nl80211_channel_type ch_type);
+u8 rtl92d_phy_sw_chnl(struct ieee80211_hw *hw);
bool rtl92d_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
enum rf_content content,
enum radio_path rfpath);
diff --cc drivers/net/wireless/rtlwifi/rtl8723ae/phy.h
index bbb950d,3d8f9e3..c3adc72
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/phy.h
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/phy.h
@@@ -183,33 -183,34 +183,32 @@@ struct tx_power_struct
u32 mcs_original_offset[4][16];
};
-extern u32 rtl8723ae_phy_query_bb_reg(struct ieee80211_hw *hw,
- u32 regaddr, u32 bitmask);
-extern void rtl8723ae_phy_set_bb_reg(struct ieee80211_hw *hw,
- u32 regaddr, u32 bitmask, u32 data);
-extern u32 rtl8723ae_phy_query_rf_reg(struct ieee80211_hw *hw,
- enum radio_path rfpath, u32 regaddr,
- u32 bitmask);
-extern void rtl8723ae_phy_set_rf_reg(struct ieee80211_hw *hw,
- enum radio_path rfpath, u32 regaddr,
- u32 bitmask, u32 data);
-extern bool rtl8723ae_phy_mac_config(struct ieee80211_hw *hw);
-extern bool rtl8723ae_phy_bb_config(struct ieee80211_hw *hw);
-extern bool rtl8723ae_phy_rf_config(struct ieee80211_hw *hw);
-extern bool rtl92c_phy_config_rf_with_feaderfile(struct ieee80211_hw *hw,
- enum radio_path rfpath);
-extern void rtl8723ae_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
-extern void rtl8723ae_phy_get_txpower_level(struct ieee80211_hw *hw,
- long *powerlevel);
-extern void rtl8723ae_phy_set_txpower_level(struct ieee80211_hw *hw,
- u8 channel);
-extern bool rtl8723ae_phy_update_txpower_dbm(struct ieee80211_hw *hw,
- long power_indbm);
-extern void rtl8723ae_phy_set_bw_mode_callback(struct ieee80211_hw *hw);
-extern void rtl8723ae_phy_set_bw_mode(struct ieee80211_hw *hw,
- enum nl80211_channel_type ch_type);
-extern void rtl8723ae_phy_sw_chnl_callback(struct ieee80211_hw *hw);
-extern u8 rtl8723ae_phy_sw_chnl(struct ieee80211_hw *hw);
-extern void rtl8723ae_phy_iq_calibrate(struct ieee80211_hw *hw, bool recovery);
+u32 rtl8723ae_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr,
+ u32 bitmask);
+void rtl8723ae_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask,
+ u32 data);
+u32 rtl8723ae_phy_query_rf_reg(struct ieee80211_hw *hw,
+ enum radio_path rfpath, u32 regaddr,
+ u32 bitmask);
+void rtl8723ae_phy_set_rf_reg(struct ieee80211_hw *hw,
+ enum radio_path rfpath, u32 regaddr, u32 bitmask,
+ u32 data);
+bool rtl8723ae_phy_mac_config(struct ieee80211_hw *hw);
+bool rtl8723ae_phy_bb_config(struct ieee80211_hw *hw);
+bool rtl8723ae_phy_rf_config(struct ieee80211_hw *hw);
+bool rtl92c_phy_config_rf_with_feaderfile(struct ieee80211_hw *hw,
+ enum radio_path rfpath);
+void rtl8723ae_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
+void rtl8723ae_phy_get_txpower_level(struct ieee80211_hw *hw, long *powerlevel);
+void rtl8723ae_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel);
+bool rtl8723ae_phy_update_txpower_dbm(struct ieee80211_hw *hw,
+ long power_indbm);
- void rtl8723ae_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation);
+void rtl8723ae_phy_set_bw_mode_callback(struct ieee80211_hw *hw);
+void rtl8723ae_phy_set_bw_mode(struct ieee80211_hw *hw,
+ enum nl80211_channel_type ch_type);
+void rtl8723ae_phy_sw_chnl_callback(struct ieee80211_hw *hw);
+u8 rtl8723ae_phy_sw_chnl(struct ieee80211_hw *hw);
+void rtl8723ae_phy_iq_calibrate(struct ieee80211_hw *hw, bool recovery);
void rtl8723ae_phy_lc_calibrate(struct ieee80211_hw *hw);
void rtl8723ae_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain);
bool rtl8723ae_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2013-10-22 15:10 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-09-30 11:26 linux-next: manual merge of the bcon tree Thierry Reding
2013-09-30 11:26 ` linux-next: manual merge of the block tree Thierry Reding
[not found] ` <1380540373-25352-1-git-send-email-treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-09-30 11:26 ` linux-next: manual merge of the cgroup tree Thierry Reding
2013-09-30 11:26 ` linux-next: manual merge of the drm-intel tree Thierry Reding
2013-09-30 11:32 ` Daniel Vetter
2013-09-30 11:26 ` linux-next: manual merge of the ipsec-next tree Thierry Reding
2013-09-30 11:26 ` linux-next: manual merge of the net-next tree Thierry Reding
2013-09-30 11:26 ` linux-next: manual merge of the random tree Thierry Reding
2013-09-30 11:26 ` linux-next: manual merge of the sh tree Thierry Reding
2013-09-30 11:26 ` linux-next: manual merge of the tip tree Thierry Reding
2013-09-30 11:26 ` linux-next: manual merge of the vfs tree Thierry Reding
2013-09-30 11:26 ` linux-next: manual merge of the wireless-next tree Thierry Reding
2013-09-30 14:26 ` Larry Finger
2013-10-07 15:18 linux-next: Tree for Oct 7 Thierry Reding
2013-10-07 15:18 ` linux-next: manual merge of the wireless-next tree Thierry Reding
2013-10-07 15:48 ` Larry Finger
2013-10-07 15:56 ` Joe Perches
2013-10-07 16:09 ` Larry Finger
2013-10-07 16:17 ` Joe Perches
2013-10-07 17:16 ` Larry Finger
2013-10-21 15:36 linux-next: Tree for Oct 21 Thierry Reding
2013-10-22 15:10 ` linux-next: manual merge of the net-next tree Thierry Reding
2013-10-22 15:10 ` linux-next: manual merge of the wireless-next tree Thierry Reding
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).