Linux-Next Archive on lore.kernel.org
 help / color / Atom feed
* linux-next: build warning after merge of the hwmon-staging tree
@ 2021-03-30  7:27 Stephen Rothwell
  2021-03-30 10:38 ` Guenter Roeck
  2021-03-30 20:25 ` Chris Packham
  0 siblings, 2 replies; 18+ messages in thread
From: Stephen Rothwell @ 2021-03-30  7:27 UTC (permalink / raw)
  To: Guenter Roeck
  Cc: Chris Packham, Linux Kernel Mailing List, Linux Next Mailing List


[-- Attachment #1: Type: text/plain, Size: 323 bytes --]

Hi all,

After merging the hwmon-staging tree, today's linux-next build (htmldocs)
produced this warning:

Documentation/hwmon/bpa-rs600.rst: WARNING: document isn't included in any toctree

Introduced by commit

  9a8210575cde ("hwmon: (pmbus) Add driver for BluTek BPA-RS600")

-- 
Cheers,
Stephen Rothwell

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: linux-next: build warning after merge of the hwmon-staging tree
  2021-03-30  7:27 linux-next: build warning after merge of the hwmon-staging tree Stephen Rothwell
@ 2021-03-30 10:38 ` Guenter Roeck
  2021-03-30 20:25 ` Chris Packham
  1 sibling, 0 replies; 18+ messages in thread
From: Guenter Roeck @ 2021-03-30 10:38 UTC (permalink / raw)
  To: Stephen Rothwell
  Cc: Chris Packham, Linux Kernel Mailing List, Linux Next Mailing List

[-- Attachment #1.1: Type: text/plain, Size: 397 bytes --]

On 3/30/21 12:27 AM, Stephen Rothwell wrote:
> Hi all,
> 
> After merging the hwmon-staging tree, today's linux-next build (htmldocs)
> produced this warning:
> 
> Documentation/hwmon/bpa-rs600.rst: WARNING: document isn't included in any toctree
> 
> Introduced by commit
> 
>   9a8210575cde ("hwmon: (pmbus) Add driver for BluTek BPA-RS600")
> 
I fixed it up.

Thanks,
Guenter


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: linux-next: build warning after merge of the hwmon-staging tree
  2021-03-30  7:27 linux-next: build warning after merge of the hwmon-staging tree Stephen Rothwell
  2021-03-30 10:38 ` Guenter Roeck
@ 2021-03-30 20:25 ` Chris Packham
  2021-03-30 20:55   ` Guenter Roeck
  1 sibling, 1 reply; 18+ messages in thread
From: Chris Packham @ 2021-03-30 20:25 UTC (permalink / raw)
  To: Stephen Rothwell, Guenter Roeck
  Cc: Linux Kernel Mailing List, Linux Next Mailing List

My bad. I'll send a patch shortly

On 30/03/21 8:27 pm, Stephen Rothwell wrote:
> Hi all,
>
> After merging the hwmon-staging tree, today's linux-next build (htmldocs)
> produced this warning:
>
> Documentation/hwmon/bpa-rs600.rst: WARNING: document isn't included in any toctree
>
> Introduced by commit
>
>    9a8210575cde ("hwmon: (pmbus) Add driver for BluTek BPA-RS600")
>

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: linux-next: build warning after merge of the hwmon-staging tree
  2021-03-30 20:25 ` Chris Packham
@ 2021-03-30 20:55   ` Guenter Roeck
  0 siblings, 0 replies; 18+ messages in thread
From: Guenter Roeck @ 2021-03-30 20:55 UTC (permalink / raw)
  To: Chris Packham, Stephen Rothwell
  Cc: Linux Kernel Mailing List, Linux Next Mailing List

On 3/30/21 1:25 PM, Chris Packham wrote:
> My bad. I'll send a patch shortly
> 

No need. I patched it up already.

Thanks,
Guenter

> On 30/03/21 8:27 pm, Stephen Rothwell wrote:
>> Hi all,
>>
>> After merging the hwmon-staging tree, today's linux-next build (htmldocs)
>> produced this warning:
>>
>> Documentation/hwmon/bpa-rs600.rst: WARNING: document isn't included in any toctree
>>
>> Introduced by commit
>>
>>    9a8210575cde ("hwmon: (pmbus) Add driver for BluTek BPA-RS600")
>>
> 


^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: linux-next: build warning after merge of the hwmon-staging tree
  2021-06-10  0:21 Stephen Rothwell
@ 2021-06-10  3:38 ` Guenter Roeck
  0 siblings, 0 replies; 18+ messages in thread
From: Guenter Roeck @ 2021-06-10  3:38 UTC (permalink / raw)
  To: Stephen Rothwell
  Cc: Robert Marko, Linux Kernel Mailing List, Linux Next Mailing List

On Thu, Jun 10, 2021 at 10:21:17AM +1000, Stephen Rothwell wrote:
> Hi all,
> 
> After merging the hwmon-staging tree, today's linux-next build (x86_64
> allmodconfig) produced this warning:
> 
> WARNING: modpost: module dps920ab uses symbol pmbus_get_debugfs_dir from namespace PMBUS, but does not import it.
> WARNING: modpost: module dps920ab uses symbol pmbus_do_probe from namespace PMBUS, but does not import it.
> WARNING: modpost: module dps920ab uses symbol pmbus_read_word_data from namespace PMBUS, but does not import it.
> WARNING: modpost: module dps920ab uses symbol pmbus_write_word_data from namespace PMBUS, but does not import it.
> 
> Introduced by commit
> 
>   47e986c5a316 ("hwmon: (pmbus) Add driver for Delta DPS-920AB PSU")

Fixed.

Thanks,
Guenter

> 
> -- 
> Cheers,
> Stephen Rothwell



^ permalink raw reply	[flat|nested] 18+ messages in thread

* linux-next: build warning after merge of the hwmon-staging tree
@ 2021-06-10  0:21 Stephen Rothwell
  2021-06-10  3:38 ` Guenter Roeck
  0 siblings, 1 reply; 18+ messages in thread
From: Stephen Rothwell @ 2021-06-10  0:21 UTC (permalink / raw)
  To: Guenter Roeck
  Cc: Robert Marko, Linux Kernel Mailing List, Linux Next Mailing List


[-- Attachment #1: Type: text/plain, Size: 705 bytes --]

Hi all,

After merging the hwmon-staging tree, today's linux-next build (x86_64
allmodconfig) produced this warning:

WARNING: modpost: module dps920ab uses symbol pmbus_get_debugfs_dir from namespace PMBUS, but does not import it.
WARNING: modpost: module dps920ab uses symbol pmbus_do_probe from namespace PMBUS, but does not import it.
WARNING: modpost: module dps920ab uses symbol pmbus_read_word_data from namespace PMBUS, but does not import it.
WARNING: modpost: module dps920ab uses symbol pmbus_write_word_data from namespace PMBUS, but does not import it.

Introduced by commit

  47e986c5a316 ("hwmon: (pmbus) Add driver for Delta DPS-920AB PSU")

-- 
Cheers,
Stephen Rothwell

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: linux-next: build warning after merge of the hwmon-staging tree
  2021-03-12  4:00 ` Chris Packham
@ 2021-03-12  4:45   ` Stephen Rothwell
  0 siblings, 0 replies; 18+ messages in thread
From: Stephen Rothwell @ 2021-03-12  4:45 UTC (permalink / raw)
  To: Chris Packham
  Cc: Stephen Rothwell, Guenter Roeck, Linux Kernel Mailing List,
	Linux Next Mailing List


[-- Attachment #1: Type: text/plain, Size: 249 bytes --]

Hi Chris,

On Fri, 12 Mar 2021 04:00:45 +0000 Chris Packham <Chris.Packham@alliedtelesis.co.nz> wrote:
>
> Easy enough to fix. Who should I send the patch to?

Guenter, since the original patch is in his tree.
-- 
Cheers,
Stephen Rothwell

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: linux-next: build warning after merge of the hwmon-staging tree
  2021-03-12  3:50 Stephen Rothwell
@ 2021-03-12  4:00 ` Chris Packham
  2021-03-12  4:45   ` Stephen Rothwell
  0 siblings, 1 reply; 18+ messages in thread
From: Chris Packham @ 2021-03-12  4:00 UTC (permalink / raw)
  To: Stephen Rothwell, Guenter Roeck
  Cc: Linux Kernel Mailing List, Linux Next Mailing List


On 12/03/21 4:50 pm, Stephen Rothwell wrote:
> Hi all,
>
> After merging the hwmon-staging tree, today's linux-next build (htmldocs)
> produced this warning:
>
> Documentation/hwmon/ir36021.rst:34: WARNING: Malformed table.
> No bottom table border found.
>
> ======================= ===========================
> curr1_label             "iin"
> curr1_input             Measured input current
> curr1_alarm             Input fault alarm
>
> curr2_label             "iout1"
> curr2_input             Measured output current
> curr2_alarm             Output over-current alarm
>
> in1_label               "vin"
> in1_input               Measured input voltage
> in1_alarm               Input under-voltage alarm
>
> in2_label               "vout1"
> in2_input               Measured output voltage
> in2_alarm               Output over-voltage alarm
>
> power1_label            "pin"
> power1_input            Measured input power
> power1_alarm            Input under-voltage alarm
>
> power2_label            "pout1"
> power2_input            Measured output power
>
> temp1_input             Measured temperature
> temp1_alarm             Temperature alarm
>
> temp2_input             Measured other loop temperature
> temp2_alarm             Temperature alarm
>
> Caused by commit
>
>    0be9fee30ff9 ("hwmon: (pmbus) Add driver for Infineon IR36021")
>
Easy enough to fix. Who should I send the patch to?

^ permalink raw reply	[flat|nested] 18+ messages in thread

* linux-next: build warning after merge of the hwmon-staging tree
@ 2021-03-12  3:50 Stephen Rothwell
  2021-03-12  4:00 ` Chris Packham
  0 siblings, 1 reply; 18+ messages in thread
From: Stephen Rothwell @ 2021-03-12  3:50 UTC (permalink / raw)
  To: Guenter Roeck
  Cc: Chris Packham, Linux Kernel Mailing List, Linux Next Mailing List


[-- Attachment #1: Type: text/plain, Size: 1313 bytes --]

Hi all,

After merging the hwmon-staging tree, today's linux-next build (htmldocs)
produced this warning:

Documentation/hwmon/ir36021.rst:34: WARNING: Malformed table.
No bottom table border found.

======================= ===========================
curr1_label             "iin"
curr1_input             Measured input current
curr1_alarm             Input fault alarm

curr2_label             "iout1"
curr2_input             Measured output current
curr2_alarm             Output over-current alarm

in1_label               "vin"
in1_input               Measured input voltage
in1_alarm               Input under-voltage alarm

in2_label               "vout1"
in2_input               Measured output voltage
in2_alarm               Output over-voltage alarm

power1_label            "pin"
power1_input            Measured input power
power1_alarm            Input under-voltage alarm

power2_label            "pout1"
power2_input            Measured output power

temp1_input             Measured temperature
temp1_alarm             Temperature alarm

temp2_input             Measured other loop temperature
temp2_alarm             Temperature alarm

Caused by commit

  0be9fee30ff9 ("hwmon: (pmbus) Add driver for Infineon IR36021")

-- 
Cheers,
Stephen Rothwell

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 18+ messages in thread

* linux-next: build warning after merge of the hwmon-staging tree
@ 2021-01-29  7:03 Stephen Rothwell
  0 siblings, 0 replies; 18+ messages in thread
From: Stephen Rothwell @ 2021-01-29  7:03 UTC (permalink / raw)
  To: Guenter Roeck; +Cc: Linux Kernel Mailing List, Linux Next Mailing List


[-- Attachment #1: Type: text/plain, Size: 3245 bytes --]

Hi all,

After merging the hwmon-staging tree, today's linux-next build (htmldocs)
produced this warning:

Documentation/hwmon/max16601.rst:94: WARNING: Malformed table.
Text in column margin in table line 39.

======================= =======================================================
in1_label               "vin1"
in1_input               VCORE input voltage.
in1_alarm               Input voltage alarm.

in2_label               "vout1"
in2_input               VCORE output voltage.
in2_alarm               Output voltage alarm.

curr1_label             "iin1"
curr1_input             VCORE input current, derived from duty cycle and output
                        current.
curr1_max               Maximum input current.
curr1_max_alarm         Current high alarm.

curr[P+2]_label         "iin1.P"
curr[P+2]_input         VCORE phase P input current.

curr[N+2]_label         "iin2"
curr[N+2]_input         VCORE input current, derived from sensor element.
                        'N' is the number of enabled/populated phases.

curr[N+3]_label         "iin3"
curr[N+3]_input         VSA input current.

curr[N+4]_label         "iout1"
curr[N+4]_input         VCORE output current.
curr[N+4]_crit          Critical output current.
curr[N+4]_crit_alarm    Output current critical alarm.
curr[N+4]_max           Maximum output current.
curr[N+4]_max_alarm     Output current high alarm.

curr[N+P+5]_label       "iout1.P"
curr[N+P+5]_input       VCORE phase P output current.

curr[2*N+5]_label       "iout3"
curr[2*N+5]_input       VSA output current.
curr[2*N+5]_highest     Historical maximum VSA output current.
curr[2*N+5]_reset_history
                        Write any value to reset curr21_highest.
curr[2*N+5]_crit        Critical output current.
curr[2*N+5]_crit_alarm  Output current critical alarm.
curr[2*N+5]_max         Maximum output current.
curr[2*N+5]_max_alarm   Output current high alarm.

power1_label            "pin1"
power1_input            Input power, derived from duty cycle and output current.
power1_alarm            Input power alarm.

power2_label            "pin2"
power2_input            Input power, derived from input current sensor.

power3_label            "pout"
power3_input            Output power.

temp1_input             VCORE temperature.
temp1_crit              Critical high temperature.
temp1_crit_alarm        Chip temperature critical high alarm.
temp1_max               Maximum temperature.
temp1_max_alarm         Chip temperature high alarm.

temp2_input             TSENSE_0 temperature
temp3_input             TSENSE_1 temperature
temp4_input             TSENSE_2 temperature
temp5_input             TSENSE_3 temperature

temp6_input             VSA temperature.
temp6_crit              Critical high temperature.
temp6_crit_alarm        Chip temperature critical high alarm.
temp6_max               Maximum temperature.
temp6_max_alarm         Chip temperature high alarm.
======================= =======================================================

Introduced by commit

  90b0f71d62df ("hwmon: (pmbus/max16601) Determine and use number of populated phases")

-- 
Cheers,
Stephen Rothwell

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 18+ messages in thread

* linux-next: build warning after merge of the hwmon-staging tree
@ 2020-12-07  7:51 Stephen Rothwell
  0 siblings, 0 replies; 18+ messages in thread
From: Stephen Rothwell @ 2020-12-07  7:51 UTC (permalink / raw)
  To: Guenter Roeck; +Cc: xiao.ma, Linux Kernel Mailing List, Linux Next Mailing List


[-- Attachment #1: Type: text/plain, Size: 376 bytes --]

Hi all,

After merging the hwmon-staging tree, today's linux-next build (htmldocs)
produced this warning:

Documentation/hwmon/q54sj108a2.rst:4: WARNING: Title underline too short.

Kernel driver q54sj108a2
=====================

Introduced by commit

  b722d7b9e4da ("hwmon: (pmbus) Driver for Delta power supplies Q54SJ108A2")

-- 
Cheers,
Stephen Rothwell

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: linux-next: build warning after merge of the hwmon-staging tree
  2020-11-30  1:14 ` Paul Barker
@ 2020-11-30 14:53   ` Guenter Roeck
  0 siblings, 0 replies; 18+ messages in thread
From: Guenter Roeck @ 2020-11-30 14:53 UTC (permalink / raw)
  To: Paul Barker
  Cc: Stephen Rothwell, Linux Kernel Mailing List, Linux Next Mailing List

On Mon, Nov 30, 2020 at 01:14:03AM +0000, Paul Barker wrote:
> On Mon, 30 Nov 2020 at 00:56, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> >
> > Hi all,
> >
> > After merging the hwmon-staging tree, today's linux-next build (arm
> > multi_v7_defconfig) produced this warning:
> >
> > drivers/hwmon/pwm-fan.c: In function 'pwm_fan_is_visible':
> > drivers/hwmon/pwm-fan.c:167:22: warning: unused variable 'ctx' [-Wunused-variable]
> >   167 |  struct pwm_fan_ctx *ctx = (struct pwm_fan_ctx *)data;
> >       |                      ^~~
> >
> > Introduced by commit
> >
> >   439ed83acc19 ("hwmon: (pwm-fan) Convert to hwmon_device_register_with_info API")
> >
> 
> Ah yes. I removed the code that used ctx but forgot to remove the
> assignment itself. I'm surprised it didn't generate a warning for me.
> 
> I can fix it up tomorrow and send a v3 patch series.
> 
Not necessary; I already took care of it.

Guenter

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: linux-next: build warning after merge of the hwmon-staging tree
  2020-11-30  0:56 Stephen Rothwell
@ 2020-11-30  1:14 ` Paul Barker
  2020-11-30 14:53   ` Guenter Roeck
  0 siblings, 1 reply; 18+ messages in thread
From: Paul Barker @ 2020-11-30  1:14 UTC (permalink / raw)
  To: Stephen Rothwell
  Cc: Guenter Roeck, Linux Kernel Mailing List, Linux Next Mailing List

On Mon, 30 Nov 2020 at 00:56, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>
> Hi all,
>
> After merging the hwmon-staging tree, today's linux-next build (arm
> multi_v7_defconfig) produced this warning:
>
> drivers/hwmon/pwm-fan.c: In function 'pwm_fan_is_visible':
> drivers/hwmon/pwm-fan.c:167:22: warning: unused variable 'ctx' [-Wunused-variable]
>   167 |  struct pwm_fan_ctx *ctx = (struct pwm_fan_ctx *)data;
>       |                      ^~~
>
> Introduced by commit
>
>   439ed83acc19 ("hwmon: (pwm-fan) Convert to hwmon_device_register_with_info API")
>

Ah yes. I removed the code that used ctx but forgot to remove the
assignment itself. I'm surprised it didn't generate a warning for me.

I can fix it up tomorrow and send a v3 patch series.

Thanks,

-- 
Paul Barker
Konsulko Group

^ permalink raw reply	[flat|nested] 18+ messages in thread

* linux-next: build warning after merge of the hwmon-staging tree
@ 2020-11-30  0:56 Stephen Rothwell
  2020-11-30  1:14 ` Paul Barker
  0 siblings, 1 reply; 18+ messages in thread
From: Stephen Rothwell @ 2020-11-30  0:56 UTC (permalink / raw)
  To: Guenter Roeck
  Cc: Paul Barker, Linux Kernel Mailing List, Linux Next Mailing List


[-- Attachment #1: Type: text/plain, Size: 512 bytes --]

Hi all,

After merging the hwmon-staging tree, today's linux-next build (arm
multi_v7_defconfig) produced this warning:

drivers/hwmon/pwm-fan.c: In function 'pwm_fan_is_visible':
drivers/hwmon/pwm-fan.c:167:22: warning: unused variable 'ctx' [-Wunused-variable]
  167 |  struct pwm_fan_ctx *ctx = (struct pwm_fan_ctx *)data;
      |                      ^~~

Introduced by commit

  439ed83acc19 ("hwmon: (pwm-fan) Convert to hwmon_device_register_with_info API")

-- 
Cheers,
Stephen Rothwell

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: linux-next: build warning after merge of the hwmon-staging tree
  2020-02-10 22:23 Stephen Rothwell
@ 2020-02-11  0:24 ` Guenter Roeck
  0 siblings, 0 replies; 18+ messages in thread
From: Guenter Roeck @ 2020-02-11  0:24 UTC (permalink / raw)
  To: Stephen Rothwell
  Cc: Linux Next Mailing List, Linux Kernel Mailing List, Nuno Sá

On 2/10/20 2:23 PM, Stephen Rothwell wrote:
> Hi all,
> 
> After merging the hwmon-staging tree, today's linux-next build (x86_64
> allmodconfig) produced this warning:
> 
> drivers/hwmon/axi-fan-control.c: In function 'axi_fan_control_probe':
> drivers/hwmon/axi-fan-control.c:419:26: warning: 'res' may be used uninitialized in this function [-Wmaybe-uninitialized]
>    419 |   (unsigned long long)res->start, ctl->base);
>        |                          ^~
> 
> Introduced by commit
> 
>    690dd9ce04f6 ("hwmon: Support ADI Fan Control IP")
> 

Fixed up (res was actually leftover from an earlier patch version
and unused).

Guenter

^ permalink raw reply	[flat|nested] 18+ messages in thread

* linux-next: build warning after merge of the hwmon-staging tree
@ 2020-02-10 22:23 Stephen Rothwell
  2020-02-11  0:24 ` Guenter Roeck
  0 siblings, 1 reply; 18+ messages in thread
From: Stephen Rothwell @ 2020-02-10 22:23 UTC (permalink / raw)
  To: Guenter Roeck
  Cc: Linux Next Mailing List, Linux Kernel Mailing List, Nuno Sá


[-- Attachment #1: Type: text/plain, Size: 523 bytes --]

Hi all,

After merging the hwmon-staging tree, today's linux-next build (x86_64
allmodconfig) produced this warning:

drivers/hwmon/axi-fan-control.c: In function 'axi_fan_control_probe':
drivers/hwmon/axi-fan-control.c:419:26: warning: 'res' may be used uninitialized in this function [-Wmaybe-uninitialized]
  419 |   (unsigned long long)res->start, ctl->base);
      |                          ^~

Introduced by commit

  690dd9ce04f6 ("hwmon: Support ADI Fan Control IP")

-- 
Cheers,
Stephen Rothwell

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 18+ messages in thread

* linux-next: build warning after merge of the hwmon-staging tree
@ 2019-07-01  2:26 Stephen Rothwell
  0 siblings, 0 replies; 18+ messages in thread
From: Stephen Rothwell @ 2019-07-01  2:26 UTC (permalink / raw)
  To: Guenter Roeck
  Cc: Linux Next Mailing List, Linux Kernel Mailing List, Boyang Yu


[-- Attachment #1: Type: text/plain, Size: 872 bytes --]

Hi all,

After merging the hwmon-staging tree, today's linux-next build (arm
multi_v7_defconfig) produced this warning:

drivers/hwmon/lm90.c: In function 'lm90_write_convrate':
drivers/hwmon/lm90.c:597:42: warning: 'config_stop' may be used uninitialized in this function [-Wmaybe-uninitialized]
  if (data->flags & LM90_PAUSE_FOR_CONFIG && config_orig != config_stop)
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/hwmon/lm90.c:598:3: warning: 'config_orig' may be used uninitialized in this function [-Wmaybe-uninitialized]
   i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        config_orig);
        ~~~~~~~~~~~~

Introduced by commit

  479a503fa073 ("hwmon: (lm90) Fix max6658 sporadic wrong temperature reading")

-- 
Cheers,
Stephen Rothwell

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 18+ messages in thread

* linux-next: build warning after merge of the hwmon-staging tree
@ 2019-06-06  0:34 Stephen Rothwell
  0 siblings, 0 replies; 18+ messages in thread
From: Stephen Rothwell @ 2019-06-06  0:34 UTC (permalink / raw)
  To: Guenter Roeck
  Cc: Linux Next Mailing List, Linux Kernel Mailing List,
	Krzysztof Adamski, Alexander Sverdlin


[-- Attachment #1: Type: text/plain, Size: 502 bytes --]

Hi all,

After merging the hwmon-staging tree, today's linux-next build (x86_64
allmodconfig) produced this warning:

drivers/hwmon/pmbus/adm1275.c: In function 'adm1275_write_pmon_config':
drivers/hwmon/pmbus/adm1275.c:179:23: warning: unused variable 'data' [-Wunused-variable]
  struct adm1275_data *data = to_adm1275_data(info);
                       ^~~~

Introduced by commit

  438318513375 ("hwmon: (pmbus/adm1275) support PMBUS_VIRT_*_SAMPLES")

-- 
Cheers,
Stephen Rothwell

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 18+ messages in thread

end of thread, back to index

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-30  7:27 linux-next: build warning after merge of the hwmon-staging tree Stephen Rothwell
2021-03-30 10:38 ` Guenter Roeck
2021-03-30 20:25 ` Chris Packham
2021-03-30 20:55   ` Guenter Roeck
  -- strict thread matches above, loose matches on Subject: below --
2021-06-10  0:21 Stephen Rothwell
2021-06-10  3:38 ` Guenter Roeck
2021-03-12  3:50 Stephen Rothwell
2021-03-12  4:00 ` Chris Packham
2021-03-12  4:45   ` Stephen Rothwell
2021-01-29  7:03 Stephen Rothwell
2020-12-07  7:51 Stephen Rothwell
2020-11-30  0:56 Stephen Rothwell
2020-11-30  1:14 ` Paul Barker
2020-11-30 14:53   ` Guenter Roeck
2020-02-10 22:23 Stephen Rothwell
2020-02-11  0:24 ` Guenter Roeck
2019-07-01  2:26 Stephen Rothwell
2019-06-06  0:34 Stephen Rothwell

Linux-Next Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-next/0 linux-next/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-next linux-next/ https://lore.kernel.org/linux-next \
		linux-next@vger.kernel.org
	public-inbox-index linux-next

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-next


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git