From: Naresh Kamboju <naresh.kamboju@linaro.org>
To: Linux-Next Mailing List <linux-next@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>,
lkft-triage@lists.linaro.org, regressions@lists.linux.dev,
linux-mm <linux-mm@kvack.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Stephen Rothwell <sfr@canb.auug.org.au>,
Christoph Hellwig <hch@lst.de>,
"open list:IOMMU DRIVERS" <iommu@lists.linux-foundation.org>,
Anshuman Khandual <anshuman.khandual@arm.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
conor@kernel.org, Marek Szyprowski <m.szyprowski@samsung.com>,
Robin Murphy <robin.murphy@arm.com>
Subject: [next] Kernel panic - not syncing: swiotlb_init_remap: nslabs = 0 too small
Date: Thu, 14 Jul 2022 13:17:36 +0530 [thread overview]
Message-ID: <CA+G9fYuxp2Ge1JGwuXase633r8_7zPZkxrD6doCKi6aYY3mfPw@mail.gmail.com> (raw)
[Please ignore this email if it is already reported]
Linux next-20220713 boot failed on arm, arm64, x86_64 and i386 [1].
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
metadata:
git_ref: master
git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
git_sha: 4662b7adea50bb62e993a67f611f3be625d3df0d
git_describe: next-20220713
kernel_version: 5.19.0-rc6
kernel-config: https://builds.tuxbuild.com/2BtFIR2DegCrbRCCTSZF93YVeiO/config
build-url: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/pipelines/586982028
artifact-location: https://builds.tuxbuild.com/2BtFIR2DegCrbRCCTSZF93YVeiO
vmlinux.xz: https://builds.tuxbuild.com/2BtFIR2DegCrbRCCTSZF93YVeiO/vmlinux.xz
System.map: https://builds.tuxbuild.com/2BtFIR2DegCrbRCCTSZF93YVeiO/System.map
toolchain: gcc-11
Here is the boot log output from arm64 juno-r2 device.
[ 0.000000] Booting Linux on physical CPU 0x0000000100 [0x410fd033]
[ 0.000000] Linux version 5.19.0-rc6-next-20220713
(tuxmake@tuxmake) (aarch64-linux-gnu-gcc (Debian 11.3.0-3) 11.3.0, GNU
ld (GNU Binutils for Debian) 2.38) #1 SMP PREEMPT @1657717522
[ 0.000000] Machine model: ARM Juno development board (r2)
[ 0.000000] earlycon: pl11 at MMIO 0x000000007ff80000 (options '')
[ 0.000000] printk: bootconsole [pl11] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem
0x0000000080000000-0x00000009ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x9fefd1b40-0x9fefd3fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000009ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000feffffff]
[ 0.000000] node 0: [mem 0x0000000880000000-0x00000009ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000009ffffffff]
[ 0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fd000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 30 pages/cpu s82856 r8192 d31832 u122880
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 843419
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2060288
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: console=ttyAMA0,115200n8
root=/dev/nfs rw
nfsroot=10.66.16.120:/var/lib/lava/dispatcher/tmp/5283518/extract-nfsrootfs-ulkeoqdy,tcp,hard,vers=3,wsize=65536
earlycon=pl011,0x7ff80000 console_msg_format=syslog earlycon
default_hugepagesz=2M hugepages=256
sky2.mac_address=0x00,0x02,0xF7,0x00,0x68,0x51 ip=dhcp
<6>[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes, linear)
<6>[ 0.000000] Inode-cache hash table entries: 524288 (order: 10,
4194304 bytes, linear)
<6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
<0>[ 0.000000] Kernel panic - not syncing: swiotlb_init_remap:
nslabs = 0 too small
<4>[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted
5.19.0-rc6-next-20220713 #1
<4>[ 0.000000] Hardware name: ARM Juno development board (r2) (DT)
<4>[ 0.000000] Call trace:
<4>[ 0.000000] dump_backtrace+0xe8/0x130
<4>[ 0.000000] show_stack+0x24/0x60
<4>[ 0.000000] dump_stack_lvl+0x8c/0xb8
<4>[ 0.000000] dump_stack+0x18/0x34
<4>[ 0.000000] panic+0x188/0x38c
<4>[ 0.000000] swiotlb_init_remap+0x50/0x54
<4>[ 0.000000] swiotlb_init+0x20/0x2c
<4>[ 0.000000] mem_init+0x38/0x48
<4>[ 0.000000] start_kernel+0x448/0x738
<4>[ 0.000000] __primary_switched+0xb8/0xc0
<0>[ 0.000000] ---[ end Kernel panic - not syncing:
swiotlb_init_remap: nslabs = 0 too small ]---
Full test log link,
[1] https://lkft.validation.linaro.org/scheduler/job/5283518#L582
Best regards
Naresh Kamboju
--
Linaro LKFT
https://lkft.linaro.org
next reply other threads:[~2022-07-14 7:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-14 7:47 Naresh Kamboju [this message]
2022-07-14 8:20 ` [next] Kernel panic - not syncing: swiotlb_init_remap: nslabs = 0 too small Anshuman Khandual
2022-07-14 8:22 ` Christoph Hellwig
2022-07-14 11:35 ` Naresh Kamboju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CA+G9fYuxp2Ge1JGwuXase633r8_7zPZkxrD6doCKi6aYY3mfPw@mail.gmail.com \
--to=naresh.kamboju@linaro.org \
--cc=akpm@linux-foundation.org \
--cc=anshuman.khandual@arm.com \
--cc=conor@kernel.org \
--cc=hch@lst.de \
--cc=iommu@lists.linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-next@vger.kernel.org \
--cc=lkft-triage@lists.linaro.org \
--cc=m.szyprowski@samsung.com \
--cc=regressions@lists.linux.dev \
--cc=robin.murphy@arm.com \
--cc=sfr@canb.auug.org.au \
--cc=thomas.lendacky@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).