* Re: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ]
@ 2013-07-01 8:49 Sedat Dilek
2013-07-01 8:52 ` Daniel Vetter
0 siblings, 1 reply; 13+ messages in thread
From: Sedat Dilek @ 2013-07-01 8:49 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: Daniel Vetter, intel-gfx, linux-kernel, DRI, linux-next
[-- Attachment #1: Type: text/plain, Size: 570 bytes --]
On Mon, Jul 1, 2013 at 9:59 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> Hi all,
>
> Changes since 20130628:
>
> The regulator tree gained a build failure so I used the version from
> next-20130628.
>
> The trivial tree gained a conflict against the fbdev tree.
>
> The arm-soc tree gained a conflict against the net-next tree.
>
> The akpm tree lost a few patches that turned up elsewhere and I removed 2
> that were causing run time problems.
>
[ CC drm and drm-intel folks ]
[ Did not check any relevant MLs ]
Please, see attached dmesg output.
- Sedat -
[-- Attachment #2: dmesg_3.10.0-next20130701-1-iniza-small.txt --]
[-- Type: text/plain, Size: 91391 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0-next20130701-1-iniza-small (sedat.dilek@gmail.com@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Mon Jul 1 10:37:36 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask FE0000000 write-back
[ 0.000000] 6 base 11FE00000 mask FFFE00000 uncachable
[ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0204b000, 0x0204bfff] PGTABLE
[ 0.000000] BRK [0x0204c000, 0x0204cfff] PGTABLE
[ 0.000000] BRK [0x0204d000, 0x0204dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff]
[ 0.000000] [mem 0x11fc00000-0x11fdfffff] page 2M
[ 0.000000] BRK [0x0204e000, 0x0204efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff]
[ 0.000000] [mem 0x11c000000-0x11fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff]
[ 0.000000] [mem 0x40200000-0xd9bfffff] page 2M
[ 0.000000] [mem 0xd9c00000-0xd9c9efff] page 4k
[ 0.000000] BRK [0x0204f000, 0x0204ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x37966000-0x37caafff]
[ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
[ 0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD SNB-CPT 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000daf47000 00040
[ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01 Iffs IffsAsl 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff]
[ 0.000000] NODE_DATA [mem 0x11fdf7000-0x11fdfbfff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xd9c9efff]
[ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x11fdfffff]
[ 0.000000] On node 0 totalpages: 1021500
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 156 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12127 pages used for memmap
[ 0.000000] DMA32 zone: 886944 pages, LIFO batch:31
[ 0.000000] Normal zone: 1785 pages used for memmap
[ 0.000000] Normal zone: 130560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9c9f000-0xdae7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdae7f000-0xdaf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s87680 r8192 d22912 u262144
[ 0.000000] pcpu-alloc: s87680 r8192 d22912 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1007376
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3938472K/4086000K available (7109K kernel code, 1042K rwdata, 3124K rodata, 1332K init, 1984K bss, 147528K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] ODEBUG: 0 of 0 active objects replaced
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1596.342 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.68 BogoMIPS (lpj=6385368)
[ 0.000080] pid_max: default: 32768 minimum: 301
[ 0.000244] Security Framework initialized
[ 0.000302] AppArmor: AppArmor initialized
[ 0.000338] Yama: becoming mindful.
[ 0.000746] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001852] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002354] Mount-cache hash table entries: 256
[ 0.002914] Initializing cgroup subsys memory
[ 0.003013] Initializing cgroup subsys devices
[ 0.003051] Initializing cgroup subsys freezer
[ 0.003090] Initializing cgroup subsys blkio
[ 0.003126] Initializing cgroup subsys perf_event
[ 0.003165] Initializing cgroup subsys hugetlb
[ 0.003253] Disabled fast string operations
[ 0.003290] CPU: Physical Processor ID: 0
[ 0.003326] CPU: Processor Core ID: 0
[ 0.003367] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.003367] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003432] mce: CPU supports 7 MCE banks
[ 0.003483] CPU0: Thermal monitoring enabled (TM1)
[ 0.003529] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.003529] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.003529] tlb_flushall_shift: 5
[ 0.003701] Freeing SMP alternatives memory: 24K (ffffffff81e53000 - ffffffff81e59000)
[ 0.004785] ACPI: Core revision 20130517
[ 0.015483] ACPI: All ACPI Tables successfully acquired
[ 0.031561] ftrace: allocating 27048 entries in 106 pages
[ 0.046790] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.086487] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
[ 0.087102] TSC deadline timer enabled
[ 0.087114] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.087263] ... version: 3
[ 0.087299] ... bit width: 48
[ 0.087335] ... generic registers: 4
[ 0.087371] ... value mask: 0000ffffffffffff
[ 0.087409] ... max period: 0000ffffffffffff
[ 0.087447] ... fixed-purpose events: 3
[ 0.087483] ... event mask: 000000070000000f
[ 0.100531] Disabled fast string operations
[ 0.103716] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.115401] Disabled fast string operations
[ 0.129110] Disabled fast string operations
[ 0.089558] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.131242] Brought up 4 CPUs
[ 0.131344] smpboot: Total of 4 processors activated (12770.73 BogoMIPS)
[ 0.135390] devtmpfs: initialized
[ 0.137426] EVM: security.selinux
[ 0.137461] EVM: security.SMACK64
[ 0.137496] EVM: security.capability
[ 0.137618] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
[ 0.139131] regulator-dummy: no parameters
[ 0.139326] NET: Registered protocol family 16
[ 0.139702] ACPI: bus type PCI registered
[ 0.139851] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.139910] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.146720] PCI: Using configuration type 1 for base access
[ 0.150087] bio: create slab <bio-0> at 0
[ 0.150541] ACPI: Added _OSI(Module Device)
[ 0.150579] ACPI: Added _OSI(Processor Device)
[ 0.150617] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.150655] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.152458] ACPI: EC: Look up EC in DSDT
[ 0.179025] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.184955] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.196806] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.197410] ACPI: Dynamic OEM Table Load:
[ 0.197480] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.207461] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.208142] ACPI: Dynamic OEM Table Load:
[ 0.208212] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.219430] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.220003] ACPI: Dynamic OEM Table Load:
[ 0.220074] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.233416] ACPI: Interpreter enabled
[ 0.233467] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.233576] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.233613] ACPI: Using IOAPIC for interrupt routing
[ 0.233708] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.233936] ACPI: No dock devices found.
[ 0.257688] ACPI: Power Resource [FN00] (off)
[ 0.257909] ACPI: Power Resource [FN01] (off)
[ 0.258127] ACPI: Power Resource [FN02] (off)
[ 0.258344] ACPI: Power Resource [FN03] (off)
[ 0.258562] ACPI: Power Resource [FN04] (off)
[ 0.259745] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.260118] \_SB_.PCI0:_OSC invalid UUID
[ 0.260120] _OSC request data:1 8 0
[ 0.261080] PCI host bridge to bus 0000:00
[ 0.261119] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.261159] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.261200] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.261241] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.261283] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.261324] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.261380] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.261534] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.261548] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.261555] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.261560] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.261741] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.261767] pci 0000:00:16.0: reg 0x10: [mem 0xf0705000-0xf070500f 64bit]
[ 0.261853] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.262006] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.262030] pci 0000:00:1a.0: reg 0x10: [mem 0xf070a000-0xf070a3ff]
[ 0.262131] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.262238] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.262257] pci 0000:00:1b.0: reg 0x10: [mem 0xf0700000-0xf0703fff 64bit]
[ 0.262336] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.262381] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.262487] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.262577] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.262630] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.262739] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.262828] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.262884] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.262993] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.263083] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.263209] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.263238] pci 0000:00:1d.0: reg 0x10: [mem 0xf0709000-0xf07093ff]
[ 0.263339] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.263445] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.263641] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.263663] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.263673] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ 0.263683] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 0.263693] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ 0.263703] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.263714] pci 0000:00:1f.2: reg 0x24: [mem 0xf0708000-0xf07087ff]
[ 0.263766] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.263882] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.263900] pci 0000:00:1f.3: reg 0x10: [mem 0xf0704000-0xf07040ff 64bit]
[ 0.263925] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.264296] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
[ 0.264477] pci 0000:01:00.0: reg 0x10: [mem 0xf0600000-0xf0601fff 64bit]
[ 0.265206] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.265382] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.271393] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.271438] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.271617] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.271687] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.271805] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref]
[ 0.271881] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref]
[ 0.272219] pci 0000:02:00.0: supports D1 D2
[ 0.272221] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.272348] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.279314] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.279375] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.279384] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.279509] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.279547] pci 0000:03:00.0: reg 0x10: [mem 0xf0500000-0xf0507fff 64bit]
[ 0.279745] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.287285] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.287361] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.287543] \_SB_.PCI0:_OSC invalid UUID
[ 0.287545] _OSC request data:1 1f 0
[ 0.287549] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.287605] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.288499] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.288848] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.289241] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.289585] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.289931] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[ 0.290305] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.290696] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.291045] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[ 0.291955] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.292032] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.292093] Found 1 acpi root devices
[ 0.292162] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.292516] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.292575] vgaarb: loaded
[ 0.292609] vgaarb: bridge control possible 0000:00:02.0
[ 0.293318] SCSI subsystem initialized
[ 0.293355] ACPI: bus type ATA registered
[ 0.293492] libata version 3.00 loaded.
[ 0.293551] ACPI: bus type USB registered
[ 0.293633] usbcore: registered new interface driver usbfs
[ 0.293694] usbcore: registered new interface driver hub
[ 0.293787] usbcore: registered new device driver usb
[ 0.294173] PCI: Using ACPI for IRQ routing
[ 0.295882] PCI: pci_cache_line_size set to 64 bytes
[ 0.295994] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.295997] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
[ 0.295999] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.296001] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[ 0.296244] NetLabel: Initializing
[ 0.296280] NetLabel: domain hash size = 128
[ 0.296317] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.296401] NetLabel: unlabeled traffic allowed by default
[ 0.296528] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.296720] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.299787] Switched to clocksource hpet
[ 0.317353] AppArmor: AppArmor Filesystem Enabled
[ 0.317447] pnp: PnP ACPI init
[ 0.317499] ACPI: bus type PNP registered
[ 0.317890] pnp 00:00: [dma 4]
[ 0.317933] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.317977] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.318143] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.318199] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.318278] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.318320] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.318360] system 00:04: [io 0x5000-0x5003] has been reserved
[ 0.318401] system 00:04: [io 0xffff] has been reserved
[ 0.318441] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 0.318482] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.318523] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.318564] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.318605] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.318646] system 00:04: [io 0x5000-0x500f] could not be reserved
[ 0.318688] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.318739] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.318832] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.318875] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.318935] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.319019] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[ 0.319327] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.319370] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.319412] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.319454] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.319496] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.319537] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.319578] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.319621] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.319663] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.319706] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.319749] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.320472] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.320511] pnp: PnP ACPI: found 11 devices
[ 0.320548] ACPI: bus type PNP unregistered
[ 0.328621] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.328666] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.328714] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.328754] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.328802] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.328863] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.328906] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.329376] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.329378] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.329380] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.329382] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.329384] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.329386] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[ 0.329389] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.329391] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.329393] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.329529] NET: Registered protocol family 2
[ 0.329938] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.330171] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[ 0.330504] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.330802] TCP: reno registered
[ 0.330855] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[ 0.330960] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[ 0.331254] NET: Registered protocol family 1
[ 0.331310] pci 0000:00:02.0: Boot video device
[ 0.332104] PCI: CLS 64 bytes, default 64
[ 0.332314] Trying to unpack rootfs image as initramfs...
[ 0.408427] Freeing initrd memory: 3348K (ffff880037966000 - ffff880037cab000)
[ 0.408488] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.408530] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff]
[ 0.408837] perf: amd_iommu PMU not installed. No support!
[ 0.409000] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[ 0.409047] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[ 0.409098] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[ 0.409149] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[ 0.409273] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.409331] Scanning for low memory corruption every 60 seconds
[ 0.409969] Initialise module verification
[ 0.410068] audit: initializing netlink socket (disabled)
[ 0.410128] type=2000 audit(1372675389.396:1): initialized
[ 0.440083] bounce pool size: 64 pages
[ 0.440144] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.441362] VFS: Disk quotas dquot_6.5.2
[ 0.441441] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.442310] fuse init (API version 7.22)
[ 0.442451] msgmni has been set to 7698
[ 0.443206] Key type asymmetric registered
[ 0.443244] Asymmetric key parser 'x509' registered
[ 0.443330] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.443440] io scheduler noop registered
[ 0.443478] io scheduler deadline registered (default)
[ 0.443554] io scheduler cfq registered
[ 0.444032] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.444113] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.444246] intel_idle: MWAIT substates: 0x21120
[ 0.444247] intel_idle: v0.4 model 0x2A
[ 0.444249] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.444721] ACPI: AC Adapter [ADP1] (on-line)
[ 0.445172] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.445249] ACPI: Lid Switch [LID0]
[ 0.445348] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.445407] ACPI: Power Button [PWRB]
[ 0.445502] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.445559] ACPI: Power Button [PWRF]
[ 0.445686] ACPI: Fan [FAN0] (off)
[ 0.445775] ACPI: Fan [FAN1] (off)
[ 0.445862] ACPI: Fan [FAN2] (off)
[ 0.445948] ACPI: Fan [FAN3] (off)
[ 0.446032] ACPI: Fan [FAN4] (off)
[ 0.446148] ACPI: Requesting acpi_cpufreq
[ 0.449519] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.449560] ACPI: Thermal Zone [TZ00] (68 C)
[ 0.450016] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.450056] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.450142] GHES: HEST is not enabled!
[ 0.450372] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.455207] ACPI: Battery Slot [BAT1] (battery present)
[ 0.455223] Linux agpgart interface v0.103
[ 0.457809] brd: module loaded
[ 0.459219] loop: module loaded
[ 0.459485] mei_me 0000:00:16.0: setting latency timer to 64
[ 0.459532] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[ 0.462701] ahci 0000:00:1f.2: version 3.0
[ 0.462888] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 0.463094] ahci: SSS flag set, parallel bus scan disabled
[ 0.475703] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[ 0.475760] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.475821] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.500504] scsi0 : ahci
[ 0.500747] scsi1 : ahci
[ 0.500900] scsi2 : ahci
[ 0.501058] scsi3 : ahci
[ 0.501212] scsi4 : ahci
[ 0.501365] scsi5 : ahci
[ 0.501475] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41
[ 0.501530] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41
[ 0.501583] ata3: DUMMY
[ 0.501618] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41
[ 0.501672] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41
[ 0.501725] ata6: DUMMY
[ 0.502612] libphy: Fixed MDIO Bus: probed
[ 0.502924] tun: Universal TUN/TAP device driver, 1.6
[ 0.502962] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.503088] PPP generic driver version 2.4.2
[ 0.503235] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.503276] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
[ 0.503286] ehci-pci: EHCI PCI platform driver
[ 0.503502] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.503511] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.503557] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.503628] ehci-pci 0000:00:1a.0: debug port 2
[ 0.503683] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[ 0.503687] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 0.503727] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 0.507614] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.507616] ehci-pci 0000:00:1a.0: supports USB remote wakeup
[ 0.507667] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000
[ 0.507709] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 0.519644] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.519719] usb usb1: default language 0x0409
[ 0.519732] usb usb1: udev 1, busnum 1, minor = 0
[ 0.519735] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.519776] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.519830] usb usb1: Product: EHCI Host Controller
[ 0.519867] usb usb1: Manufacturer: Linux 3.10.0-next20130701-1-iniza-small ehci_hcd
[ 0.519922] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.520088] usb usb1: usb_probe_device
[ 0.520091] usb usb1: configuration #1 chosen from 1 choice
[ 0.520102] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 0.520135] hub 1-0:1.0: usb_probe_interface
[ 0.520137] hub 1-0:1.0: usb_probe_interface - got id
[ 0.520140] hub 1-0:1.0: USB hub found
[ 0.520184] hub 1-0:1.0: 2 ports detected
[ 0.520220] hub 1-0:1.0: standalone hub
[ 0.520222] hub 1-0:1.0: no power switching (usb 1.0)
[ 0.520223] hub 1-0:1.0: individual port over-current protection
[ 0.520225] hub 1-0:1.0: power on to power good time: 20ms
[ 0.520231] hub 1-0:1.0: local power source is good
[ 0.520286] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 0.520506] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.520513] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.520559] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.520628] ehci-pci 0000:00:1d.0: debug port 2
[ 0.520668] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[ 0.520672] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 0.520706] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 0.524602] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.524604] ehci-pci 0000:00:1d.0: supports USB remote wakeup
[ 0.524649] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000
[ 0.524692] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 0.535633] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.535706] usb usb2: default language 0x0409
[ 0.535718] usb usb2: udev 1, busnum 2, minor = 128
[ 0.535720] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.535762] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.535815] usb usb2: Product: EHCI Host Controller
[ 0.535853] usb usb2: Manufacturer: Linux 3.10.0-next20130701-1-iniza-small ehci_hcd
[ 0.535908] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.536057] usb usb2: usb_probe_device
[ 0.536060] usb usb2: configuration #1 chosen from 1 choice
[ 0.536069] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 0.536101] hub 2-0:1.0: usb_probe_interface
[ 0.536103] hub 2-0:1.0: usb_probe_interface - got id
[ 0.536105] hub 2-0:1.0: USB hub found
[ 0.536146] hub 2-0:1.0: 2 ports detected
[ 0.536182] hub 2-0:1.0: standalone hub
[ 0.536183] hub 2-0:1.0: no power switching (usb 1.0)
[ 0.536185] hub 2-0:1.0: individual port over-current protection
[ 0.536187] hub 2-0:1.0: power on to power good time: 20ms
[ 0.536192] hub 2-0:1.0: local power source is good
[ 0.536245] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 0.536318] ehci-platform: EHCI generic platform driver
[ 0.536373] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.536413] ohci_hcd: block sizes: ed 80 td 96
[ 0.536418] ohci-pci: OHCI PCI platform driver
[ 0.536473] ohci-platform: OHCI generic platform driver
[ 0.536528] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.536769] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.536814] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 0.546588] xhci_hcd 0000:03:00.0: supports USB remote wakeup
[ 0.546621] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[ 0.546629] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[ 0.546636] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[ 0.546643] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 0.546652] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[ 0.546922] usb usb3: default language 0x0409
[ 0.546933] usb usb3: udev 1, busnum 3, minor = 256
[ 0.546935] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.546977] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.547030] usb usb3: Product: xHCI Host Controller
[ 0.547069] usb usb3: Manufacturer: Linux 3.10.0-next20130701-1-iniza-small xhci_hcd
[ 0.547123] usb usb3: SerialNumber: 0000:03:00.0
[ 0.547305] usb usb3: usb_probe_device
[ 0.547308] usb usb3: configuration #1 chosen from 1 choice
[ 0.547313] xHCI xhci_add_endpoint called for root hub
[ 0.547314] xHCI xhci_check_bandwidth called for root hub
[ 0.547323] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 0.547354] hub 3-0:1.0: usb_probe_interface
[ 0.547356] hub 3-0:1.0: usb_probe_interface - got id
[ 0.547358] hub 3-0:1.0: USB hub found
[ 0.547403] hub 3-0:1.0: 2 ports detected
[ 0.547440] hub 3-0:1.0: standalone hub
[ 0.547441] hub 3-0:1.0: no power switching (usb 1.0)
[ 0.547443] hub 3-0:1.0: individual port over-current protection
[ 0.547444] hub 3-0:1.0: Single TT
[ 0.547446] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 0.547448] hub 3-0:1.0: power on to power good time: 20ms
[ 0.547453] hub 3-0:1.0: local power source is good
[ 0.547493] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 0.547558] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.547602] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 0.547677] xhci_hcd 0000:03:00.0: supports USB remote wakeup
[ 0.547711] usb usb4: skipped 1 descriptor after endpoint
[ 0.547716] usb usb4: default language 0x0409
[ 0.547728] usb usb4: udev 1, busnum 4, minor = 384
[ 0.547730] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.547771] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.547825] usb usb4: Product: xHCI Host Controller
[ 0.547863] usb usb4: Manufacturer: Linux 3.10.0-next20130701-1-iniza-small xhci_hcd
[ 0.547917] usb usb4: SerialNumber: 0000:03:00.0
[ 0.548052] usb usb4: usb_probe_device
[ 0.548054] usb usb4: configuration #1 chosen from 1 choice
[ 0.548059] xHCI xhci_add_endpoint called for root hub
[ 0.548061] xHCI xhci_check_bandwidth called for root hub
[ 0.548067] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 0.548097] hub 4-0:1.0: usb_probe_interface
[ 0.548099] hub 4-0:1.0: usb_probe_interface - got id
[ 0.548101] hub 4-0:1.0: USB hub found
[ 0.548146] hub 4-0:1.0: 2 ports detected
[ 0.548183] hub 4-0:1.0: standalone hub
[ 0.548184] hub 4-0:1.0: no power switching (usb 1.0)
[ 0.548186] hub 4-0:1.0: individual port over-current protection
[ 0.548188] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 0.548189] hub 4-0:1.0: power on to power good time: 20ms
[ 0.548194] hub 4-0:1.0: local power source is good
[ 0.548227] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 0.559688] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[ 0.566094] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.566136] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.566395] mousedev: PS/2 mouse device common for all mice
[ 0.566896] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.566968] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.567086] device-mapper: uevent: version 1.0.3
[ 0.567211] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 0.567272] Intel P-state driver initializing.
[ 0.567321] Intel pstate controlling: cpu 0
[ 0.567381] Intel pstate controlling: cpu 1
[ 0.567439] Intel pstate controlling: cpu 2
[ 0.567506] Intel pstate controlling: cpu 3
[ 0.567801] cpuidle: using governor ladder
[ 0.568073] cpuidle: using governor menu
[ 0.568117] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.568397] ashmem: initialized
[ 0.568594] TCP: cubic registered
[ 0.569013] NET: Registered protocol family 10
[ 0.569694] NET: Registered protocol family 17
[ 0.569762] Key type dns_resolver registered
[ 0.570363] PM: Hibernation image not present or could not be loaded.
[ 0.570369] Loading module verification certificates
[ 0.571755] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: c945ba9e42283730cd6e235667a916481a260bf0'
[ 0.571840] registered taskstats version 1
[ 0.575427] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.576863] Key type trusted registered
[ 0.584585] Key type encrypted registered
[ 0.590457] rtc_cmos 00:05: setting system clock to 2013-07-01 10:43:09 UTC (1372675389)
[ 0.590902] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.590941] EDD information not available.
[ 0.619708] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 0.619728] hub 1-0:1.0: port 1: status 0501 change 0001
[ 0.635689] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 0.635701] hub 2-0:1.0: port 1: status 0501 change 0001
[ 0.643699] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.643935] hub 3-0:1.0: hub_suspend
[ 0.643945] usb usb3: bus auto-suspend, wakeup 1
[ 0.647703] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.647751] hub 4-0:1.0: hub_suspend
[ 0.647758] usb usb4: bus auto-suspend, wakeup 1
[ 0.656265] usb usb4: usb wakeup-resume
[ 0.656276] usb usb4: usb auto-resume
[ 0.667667] hub 4-0:1.0: hub_resume
[ 0.667694] hub 4-0:1.0: port 1: status 0203 change 0001
[ 0.719638] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 0.719667] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 0.775799] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
[ 0.775806] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 0.819543] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.820811] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[ 0.820866] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.822293] ata1.00: configured for UDMA/133
[ 0.822684] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[ 0.823089] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.823143] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.823210] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.823466] sd 0:0:0:0: [sda] Write Protect is off
[ 0.823512] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.823688] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.831500] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.833810] sda: sda1 sda2 sda3
[ 0.835259] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.887721] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
[ 0.887733] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 0.964160] usb 1-1: udev 2, busnum 1, minor = 1
[ 0.964168] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 0.964222] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.964549] usb 1-1: usb_probe_device
[ 0.964557] usb 1-1: configuration #1 chosen from 1 choice
[ 0.964772] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 0.964835] hub 1-1:1.0: usb_probe_interface
[ 0.964839] hub 1-1:1.0: usb_probe_interface - got id
[ 0.964844] hub 1-1:1.0: USB hub found
[ 0.965631] hub 1-1:1.0: 6 ports detected
[ 0.965681] hub 1-1:1.0: standalone hub
[ 0.965684] hub 1-1:1.0: individual port power switching
[ 0.965687] hub 1-1:1.0: individual port over-current protection
[ 0.965689] hub 1-1:1.0: Single TT
[ 0.965692] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 0.965694] hub 1-1:1.0: power on to power good time: 100ms
[ 0.965961] hub 1-1:1.0: local power source is good
[ 0.966279] hub 1-1:1.0: enabling power on all ports
[ 0.967382] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 0.967396] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 1.023622] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
[ 1.023632] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.064308] hub 1-1:1.0: port 4: status 0101 change 0001
[ 1.079354] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.135543] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
[ 1.135555] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.139315] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.139971] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133
[ 1.140027] ata2.00: 31277232 sectors, multi 1: LBA48
[ 1.140766] ata2.00: configured for UDMA/133
[ 1.141165] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5
[ 1.141514] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 1.141535] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.141782] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.141830] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.141870] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.142987] sdb: sdb1 sdb2
[ 1.143852] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.163304] usb 1-1: link qh256-0001/ffff8801187717c0 start 1 [1/0 us]
[ 1.211985] usb 2-1: udev 2, busnum 2, minor = 129
[ 1.211993] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.212058] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.212401] usb 2-1: usb_probe_device
[ 1.212408] usb 2-1: configuration #1 chosen from 1 choice
[ 1.212587] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[ 1.212657] hub 2-1:1.0: usb_probe_interface
[ 1.212661] hub 2-1:1.0: usb_probe_interface - got id
[ 1.212667] hub 2-1:1.0: USB hub found
[ 1.212956] hub 2-1:1.0: 6 ports detected
[ 1.213016] hub 2-1:1.0: standalone hub
[ 1.213020] hub 2-1:1.0: individual port power switching
[ 1.213022] hub 2-1:1.0: individual port over-current protection
[ 1.213025] hub 2-1:1.0: Single TT
[ 1.213028] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 1.213031] hub 2-1:1.0: power on to power good time: 100ms
[ 1.213475] hub 2-1:1.0: local power source is good
[ 1.213820] hub 2-1:1.0: enabling power on all ports
[ 1.214963] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 1.214989] hub 4-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s
[ 1.312392] hub 2-1:1.0: port 5: status 0101 change 0001
[ 1.330789] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.343793] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 1.344196] usb 4-1: skipped 1 descriptor after endpoint
[ 1.344201] usb 4-1: skipped 1 descriptor after endpoint
[ 1.344378] usb 4-1: default language 0x0409
[ 1.344734] usb 4-1: udev 2, busnum 4, minor = 385
[ 1.344753] usb 4-1: New USB device found, idVendor=174c, idProduct=55aa
[ 1.344803] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.344851] usb 4-1: Product: MEDION HDDrive-n-GO
[ 1.344893] usb 4-1: Manufacturer: MEDION
[ 1.344935] usb 4-1: SerialNumber: 3180000000000000092C
[ 1.345195] usb 4-1: usb_probe_device
[ 1.345200] usb 4-1: configuration #1 chosen from 1 choice
[ 1.346262] usb 4-1: Successful Endpoint Configure command
[ 1.346387] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
[ 1.346522] hub 1-1:1.0: state 7 ports 6 chg 0010 evt 0000
[ 1.346675] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
[ 1.407123] tsc: Refined TSC clocksource calibration: 1596.373 MHz
[ 1.411142] usb 2-1: link qh256-0001/ffff8801187714c0 start 1 [1/0 us]
[ 1.415334] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.459105] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.652838] usb 1-1.4: skipped 1 descriptor after configuration
[ 1.652845] usb 1-1.4: skipped 5 descriptors after interface
[ 1.652850] usb 1-1.4: skipped 1 descriptor after endpoint
[ 1.652854] usb 1-1.4: skipped 23 descriptors after interface
[ 1.655053] usb 1-1.4: default language 0x0409
[ 1.667311] usb 1-1.4: udev 3, busnum 1, minor = 2
[ 1.667319] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018
[ 1.667374] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.667441] usb 1-1.4: Product: WebCam SC-13HDL11431N
[ 1.667486] usb 1-1.4: Manufacturer: 123
[ 1.667787] usb 1-1.4: usb_probe_device
[ 1.667792] usb 1-1.4: configuration #1 chosen from 1 choice
[ 1.667932] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
[ 1.778865] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.781053] Freeing unused kernel memory: 1332K (ffffffff81d06000 - ffffffff81e53000)
[ 1.781121] Write protecting the kernel read-only data: 12288k
[ 1.784695] Freeing unused kernel memory: 1072K (ffff8800016f4000 - ffff880001800000)
[ 1.787284] Freeing unused kernel memory: 972K (ffff880001b0d000 - ffff880001c00000)
[ 1.811107] udevd[123]: starting version 175
[ 1.839901] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1)
[ 1.840028] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0000
[ 1.840179] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s
[ 1.910759] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[ 1.950113] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.950205] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.950588] r8169 0000:02:00.0: irq 47 for MSI/MSI-X
[ 1.951031] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47
[ 1.951102] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.959608] usb-storage 4-1:1.0: usb_probe_interface
[ 1.959616] usb-storage 4-1:1.0: usb_probe_interface - got id
[ 1.959621] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 1.960172] scsi6 : usb-storage 4-1:1.0
[ 1.960343] usbcore: registered new interface driver usb-storage
[ 2.006955] usb 2-1.5: udev 3, busnum 2, minor = 130
[ 2.006961] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
[ 2.007010] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.007248] usb 2-1.5: usb_probe_device
[ 2.007278] usb 2-1.5: configuration #1 chosen from 1 choice
[ 2.007822] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0)
[ 2.007990] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1)
[ 2.958503] scsi 6:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6
[ 2.959109] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2.959225] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.959734] sd 6:0:0:0: [sdc] Write Protect is off
[ 2.959782] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 2.960285] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.962845] sdc: sdc1 sdc2 sdc3
[ 2.964847] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 2.984548] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.837034] init: ureadahead main process (327) terminated with status 5
[ 8.426899] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k FS
[ 8.574772] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[ 8.775521] udevd[611]: starting version 175
[ 9.736895] lp: driver loaded but no devices found
[ 11.541993] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[ 11.542006] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.542013] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 11.542019] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.542022] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 11.542027] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.542029] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 11.542033] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.542036] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.639924] wmi: Mapper loaded
[ 11.668643] samsung_laptop: detected SABI interface: SwSmi@
[ 11.668648] samsung_laptop: Backlight controlled by ACPI video driver
[ 12.023765] [drm] Initialized drm 1.1.0 20060810
[ 12.029124] cfg80211: Calling CRDA to update world regulatory domain
[ 12.074096] Bluetooth: Core ver 2.16
[ 12.074149] NET: Registered protocol family 31
[ 12.074152] Bluetooth: HCI device and connection manager initialized
[ 12.074168] Bluetooth: HCI socket layer initialized
[ 12.074180] Bluetooth: L2CAP socket layer initialized
[ 12.074205] Bluetooth: SCO socket layer initialized
[ 12.312618] btusb 2-1.5:1.0: usb_probe_interface
[ 12.312625] btusb 2-1.5:1.0: usb_probe_interface - got id
[ 12.313398] usbcore: registered new interface driver btusb
[ 12.313857] usb 2-1.5: link qh1-0e01/ffff880108dfa640 start 0 [1/2 us]
[ 12.511651] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[ 12.511655] Copyright(c) 2003-2013 Intel Corporation
[ 12.511715] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 12.511987] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X
[ 12.853160] Linux video capture interface: v2.00
[ 13.018448] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[ 13.033659] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[ 13.053047] [drm] Memory usable by graphics device = 2048M
[ 13.053056] i915 0000:00:02.0: setting latency timer to 64
[ 13.084627] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[ 13.084642] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 13.084643] [drm] Driver supports precise vblank timestamp query.
[ 13.084820] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 13.095387] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 13.095390] [drm] This can cause pipe underruns and display issues.
[ 13.095391] [drm] Please upgrade your BIOS to fix this.
[ 13.095447] [drm:intel_pipe_config_compare] *ERROR* mismatch in clock (expected 70699, found 0
[ 13.095516] ------------[ cut here ]------------
[ 13.095542] WARNING: CPU: 0 PID: 677 at drivers/gpu/drm/i915/intel_display.c:8390 check_crtc_state+0x5b7/0xa80 [i915]()
[ 13.095553] pipe state doesn't match!
[ 13.095555] Modules linked in: i915(+) videobuf2_core snd_page_alloc videodev snd_seq_midi iwlwifi snd_seq_midi_event snd_rawmidi btusb snd_seq i2c_algo_bit snd_timer psmouse drm_kms_helper bluetooth snd_seq_device cfg80211 drm snd serio_raw samsung_laptop wmi soundcore lpc_ich video mac_hid lp parport usb_storage r8169 mii
[ 13.095578] CPU: 0 PID: 677 Comm: modprobe Not tainted 3.10.0-next20130701-1-iniza-small #1
[ 13.095580] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[ 13.095582] 00000000000020c6 ffff88010b7873f8 ffffffff816dc5ab 0000000000000007
[ 13.095586] ffff88010b787448 ffff88010b787438 ffffffff810651cc ffff88010b787458
[ 13.095589] ffff880107f4e000 ffff880106957dc8 ffff880106957800 0000000000000001
[ 13.095592] Call Trace:
[ 13.095599] [<ffffffff816dc5ab>] dump_stack+0x46/0x58
[ 13.095604] [<ffffffff810651cc>] warn_slowpath_common+0x8c/0xc0
[ 13.095617] [<ffffffff810652b6>] warn_slowpath_fmt+0x46/0x50
[ 13.095634] [<ffffffffa0280507>] check_crtc_state+0x5b7/0xa80 [i915]
[ 13.095653] [<ffffffffa028b340>] intel_modeset_check_state+0x2b0/0x700 [i915]
[ 13.095678] [<ffffffffa027ff42>] ? intel_dump_pipe_config.isra.40+0x1e2/0x1f0 [i915]
[ 13.095694] [<ffffffffa028e695>] intel_modeset_setup_hw_state+0x985/0xbd0 [i915]
[ 13.095718] [<ffffffffa028e908>] intel_modeset_gem_init+0x28/0x30 [i915]
[ 13.095733] [<ffffffffa025a2ed>] i915_driver_load+0xc0d/0xe60 [i915]
[ 13.095748] [<ffffffffa00a3c01>] drm_get_pci_dev+0x181/0x2a0 [drm]
[ 13.095752] [<ffffffff8137684d>] ? do_raw_spin_unlock+0x5d/0xb0
[ 13.095775] [<ffffffffa02556e6>] i915_pci_probe+0x36/0x70 [i915]
[ 13.095780] [<ffffffff8139523b>] local_pci_probe+0x4b/0x80
[ 13.095783] [<ffffffff81396b11>] pci_device_probe+0x101/0x120
[ 13.095787] [<ffffffff8147349b>] driver_probe_device+0x7b/0x240
[ 13.095791] [<ffffffff8147370b>] __driver_attach+0xab/0xb0
[ 13.095794] [<ffffffff81473660>] ? driver_probe_device+0x240/0x240
[ 13.095798] [<ffffffff8147177e>] bus_for_each_dev+0x5e/0x90
[ 13.095801] [<ffffffff81472f9e>] driver_attach+0x1e/0x20
[ 13.095815] [<ffffffff81472a94>] bus_add_driver+0x104/0x270
[ 13.095818] [<ffffffff81473c6d>] driver_register+0x7d/0x160
[ 13.095822] [<ffffffff81395a94>] __pci_register_driver+0x64/0x70
[ 13.095825] [<ffffffffa02f9000>] ? 0xffffffffa02f8fff
[ 13.095834] [<ffffffffa00a3e3a>] drm_pci_init+0x11a/0x130 [drm]
[ 13.095836] [<ffffffffa02f9000>] ? 0xffffffffa02f8fff
[ 13.095850] [<ffffffffa02f9066>] i915_init+0x66/0x68 [i915]
[ 13.095863] [<ffffffff8100207e>] do_one_initcall+0x4e/0x180
[ 13.095866] [<ffffffff810574a3>] ? set_memory_nx+0x43/0x50
[ 13.095871] [<ffffffff810cfdd3>] load_module+0x1de3/0x2620
[ 13.095873] [<ffffffff810ccb80>] ? show_initstate+0x50/0x50
[ 13.095877] [<ffffffff810d06bc>] SyS_init_module+0xac/0xd0
[ 13.095881] [<ffffffff816ed4af>] tracesys+0xe1/0xe6
[ 13.095883] ---[ end trace e44349253381caa8 ]---
[ 13.109536] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input4
[ 13.112840] fbcon: inteldrmfb (fb0) is primary device
[ 13.296883] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 13.413256] uvcvideo 1-1.4:1.0: usb_probe_interface
[ 13.413259] uvcvideo 1-1.4:1.0: usb_probe_interface - got id
[ 13.413307] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[ 13.428294] cfg80211: World regulatory domain updated:
[ 13.428295] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.428297] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.428298] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.428298] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.428299] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.428300] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.432657] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input5
[ 13.432786] usbcore: registered new interface driver uvcvideo
[ 13.432787] USB Video Class driver (1.1.1)
[ 13.488343] usb 1-1.4: link qh16-0001/ffff880119bbc2c0 start 2 [1/0 us]
[ 13.488408] usb 1-1.4: unlink qh16-0001/ffff880119bbc2c0 start 2 [1/0 us]
[ 13.760790] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 13.760792] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 13.760794] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 13.760795] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
[ 13.760798] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[ 13.760850] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 13.892908] type=1400 audit(1372668202.809:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=843 comm="apparmor_parser"
[ 13.893694] type=1400 audit(1372668202.809:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=843 comm="apparmor_parser"
[ 13.894201] type=1400 audit(1372668202.813:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=843 comm="apparmor_parser"
[ 14.094145] [drm:intel_pipe_config_compare] *ERROR* mismatch in clock (expected 70700, found 0
[ 14.094146] ------------[ cut here ]------------
[ 14.094174] WARNING: CPU: 2 PID: 677 at drivers/gpu/drm/i915/intel_display.c:8390 check_crtc_state+0x5b7/0xa80 [i915]()
[ 14.094175] pipe state doesn't match!
[ 14.094193] Modules linked in: iwldvm(+) mac80211 snd_hda_intel(+) uvcvideo snd_hda_codec videobuf2_vmalloc snd_hwdep joydev snd_pcm videobuf2_memops i915(+) videobuf2_core snd_page_alloc videodev snd_seq_midi iwlwifi snd_seq_midi_event snd_rawmidi btusb snd_seq i2c_algo_bit snd_timer psmouse drm_kms_helper bluetooth snd_seq_device cfg80211 drm snd serio_raw samsung_laptop wmi soundcore lpc_ich video mac_hid lp parport usb_storage r8169 mii
[ 14.094195] CPU: 2 PID: 677 Comm: modprobe Tainted: G W 3.10.0-next20130701-1-iniza-small #1
[ 14.094196] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[ 14.094200] 00000000000020c6 ffff88010b786fc8 ffffffff816dc5ab 0000000000001e45
[ 14.094202] ffff88010b787018 ffff88010b787008 ffffffff810651cc ffff88010b787028
[ 14.094204] ffff880107f4e000 ffff880106957dc8 ffff880106957800 0000000000000001
[ 14.094204] Call Trace:
[ 14.094210] [<ffffffff816dc5ab>] dump_stack+0x46/0x58
[ 14.094215] [<ffffffff810651cc>] warn_slowpath_common+0x8c/0xc0
[ 14.094217] [<ffffffff810652b6>] warn_slowpath_fmt+0x46/0x50
[ 14.094235] [<ffffffffa0280507>] check_crtc_state+0x5b7/0xa80 [i915]
[ 14.094254] [<ffffffffa028b340>] intel_modeset_check_state+0x2b0/0x700 [i915]
[ 14.094269] [<ffffffffa028b825>] intel_set_mode+0x25/0x30 [i915]
[ 14.094284] [<ffffffffa028c047>] intel_crtc_set_config+0x817/0xa00 [i915]
[ 14.094297] [<ffffffffa00a855c>] drm_mode_set_config_internal+0x5c/0xe0 [drm]
[ 14.094301] [<ffffffffa01f0416>] drm_fb_helper_set_par+0x66/0xe0 [drm_kms_helper]
[ 14.094304] [<ffffffff813c729c>] fbcon_init+0x52c/0x5b0
[ 14.094307] [<ffffffff8144204c>] visual_init+0xbc/0x120
[ 14.094309] [<ffffffff8144485a>] do_bind_con_driver+0x16a/0x320
[ 14.094312] [<ffffffff81444b34>] do_take_over_console+0x124/0x1d0
[ 14.094314] [<ffffffff813c577b>] do_fbcon_takeover+0x5b/0xb0
[ 14.094316] [<ffffffff813ca3aa>] fbcon_event_notify+0x76a/0x870
[ 14.094319] [<ffffffff8118fe10>] ? poison_obj+0x30/0x40
[ 14.094322] [<ffffffff816e8b0d>] notifier_call_chain+0x4d/0x70
[ 14.094325] [<ffffffff81091848>] __blocking_notifier_call_chain+0x58/0x80
[ 14.094328] [<ffffffff81091886>] blocking_notifier_call_chain+0x16/0x20
[ 14.094331] [<ffffffff813baeab>] fb_notifier_call_chain+0x1b/0x20
[ 14.094333] [<ffffffff813bcf6c>] register_framebuffer+0x1dc/0x310
[ 14.094337] [<ffffffffa01f00af>] drm_fb_helper_initial_config+0x35f/0x550 [drm_kms_helper]
[ 14.094340] [<ffffffffa01f0721>] ? drm_fb_helper_single_add_all_connectors+0x81/0xe0 [drm_kms_helper]
[ 14.094343] [<ffffffff811934bc>] ? kmem_cache_alloc_trace+0x1bc/0x1f0
[ 14.094357] [<ffffffffa0256481>] ? i915_write32+0x81/0x130 [i915]
[ 14.094378] [<ffffffffa02ad5b1>] intel_fbdev_initial_config+0x21/0x30 [i915]
[ 14.094392] [<ffffffffa025a512>] i915_driver_load+0xe32/0xe60 [i915]
[ 14.094405] [<ffffffffa00a3c01>] drm_get_pci_dev+0x181/0x2a0 [drm]
[ 14.094408] [<ffffffff8137684d>] ? do_raw_spin_unlock+0x5d/0xb0
[ 14.094421] [<ffffffffa02556e6>] i915_pci_probe+0x36/0x70 [i915]
[ 14.094424] [<ffffffff8139523b>] local_pci_probe+0x4b/0x80
[ 14.094426] [<ffffffff81396b11>] pci_device_probe+0x101/0x120
[ 14.094430] [<ffffffff8147349b>] driver_probe_device+0x7b/0x240
[ 14.094432] [<ffffffff8147370b>] __driver_attach+0xab/0xb0
[ 14.094435] [<ffffffff81473660>] ? driver_probe_device+0x240/0x240
[ 14.094437] [<ffffffff8147177e>] bus_for_each_dev+0x5e/0x90
[ 14.094440] [<ffffffff81472f9e>] driver_attach+0x1e/0x20
[ 14.094442] [<ffffffff81472a94>] bus_add_driver+0x104/0x270
[ 14.094445] [<ffffffff81473c6d>] driver_register+0x7d/0x160
[ 14.094448] [<ffffffff81395a94>] __pci_register_driver+0x64/0x70
[ 14.094450] [<ffffffffa02f9000>] ? 0xffffffffa02f8fff
[ 14.094458] [<ffffffffa00a3e3a>] drm_pci_init+0x11a/0x130 [drm]
[ 14.094461] [<ffffffffa02f9000>] ? 0xffffffffa02f8fff
[ 14.094474] [<ffffffffa02f9066>] i915_init+0x66/0x68 [i915]
[ 14.094476] [<ffffffff8100207e>] do_one_initcall+0x4e/0x180
[ 14.094479] [<ffffffff810574a3>] ? set_memory_nx+0x43/0x50
[ 14.094483] [<ffffffff810cfdd3>] load_module+0x1de3/0x2620
[ 14.094485] [<ffffffff810ccb80>] ? show_initstate+0x50/0x50
[ 14.094488] [<ffffffff810d06bc>] SyS_init_module+0xac/0xd0
[ 14.094491] [<ffffffff816ed4af>] tracesys+0xe1/0xe6
[ 14.094493] ---[ end trace e44349253381caa9 ]---
[ 14.097460] Console: switching to colour frame buffer device 170x48
[ 14.100478] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 14.100482] i915 0000:00:02.0: registered panic notifier
[ 14.111720] acpi device:33: registered as cooling_device9
[ 14.112084] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 14.112162] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 14.112334] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 14.112638] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 14.473826] usb 2-1.5: unlink qh1-0e01/ffff880108dfa640 start 0 [1/2 us]
[ 14.476510] usb 2-1: clear tt buffer port 5, a3 ep2 t04048d82
[ 14.817785] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 15.654754] Bluetooth: RFCOMM TTY layer initialized
[ 15.654780] Bluetooth: RFCOMM socket layer initialized
[ 15.654783] Bluetooth: RFCOMM ver 1.11
[ 15.656971] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 15.666455] ppdev: user-space parallel port driver
[ 15.678695] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.678702] Bluetooth: BNEP filters: protocol multicast
[ 15.678720] Bluetooth: BNEP socket layer initialized
[ 15.698398] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 15.698581] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 15.698753] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 15.805143] usb 1-1.4: usb auto-suspend, wakeup 0
[ 15.820859] hub 1-1:1.0: hub_suspend
[ 15.820878] usb 1-1: unlink qh256-0001/ffff8801187717c0 start 1 [1/0 us]
[ 15.823203] usb 1-1: usb auto-suspend, wakeup 1
[ 15.836851] hub 1-0:1.0: hub_suspend
[ 15.836862] usb usb1: bus auto-suspend, wakeup 1
[ 15.836866] ehci-pci 0000:00:1a.0: suspend root hub
[ 15.899128] ehci-pci 0000:00:1d.0: reused qh ffff880108dfa640 schedule
[ 15.899137] usb 2-1.5: link qh1-0e01/ffff880108dfa640 start 0 [1/2 us]
[ 15.966289] init: failsafe main process (981) killed by TERM signal
[ 16.450370] type=1400 audit(1372668205.369:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1060 comm="apparmor_parser"
[ 16.451597] type=1400 audit(1372668205.369:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1060 comm="apparmor_parser"
[ 17.539170] type=1400 audit(1372668206.457:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1135 comm="apparmor_parser"
[ 17.539795] type=1400 audit(1372668206.461:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1135 comm="apparmor_parser"
[ 17.540156] type=1400 audit(1372668206.461:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1135 comm="apparmor_parser"
[ 17.544664] type=1400 audit(1372668206.465:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1139 comm="apparmor_parser"
[ 17.545279] type=1400 audit(1372668206.465:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1139 comm="apparmor_parser"
[ 20.110070] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 20.116691] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 20.390806] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 20.397884] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 20.477272] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.967955] wlan0: authenticate with 00:04:0e:e4:00:3d
[ 26.971759] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[ 26.973472] wlan0: authenticated
[ 26.973627] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 26.973631] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 26.976937] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[ 26.980439] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[ 26.984278] wlan0: associated
[ 26.984395] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 29.750443] usb usb3: usb auto-resume
[ 29.750465] hub 3-0:1.0: hub_resume
[ 29.750499] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 29.750556] hub 3-0:1.0: hub_suspend
[ 29.750564] usb usb3: bus auto-suspend, wakeup 1
[ 29.750773] usb usb1: usb auto-resume
[ 29.750777] ehci-pci 0000:00:1a.0: resume root hub
[ 29.750789] hub 1-0:1.0: hub_resume
[ 29.750795] hub 1-0:1.0: port 1: status 0507 change 0000
[ 29.750811] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 29.750813] usb 1-1: usb auto-resume
[ 29.779063] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 29.794930] usb 1-1: finish resume
[ 29.795185] hub 1-1:1.0: hub_resume
[ 29.795680] hub 1-1:1.0: port 4: status 0507 change 0000
[ 29.795938] ehci-pci 0000:00:1a.0: reused qh ffff8801187717c0 schedule
[ 29.795946] usb 1-1: link qh256-0001/ffff8801187717c0 start 1 [1/0 us]
[ 29.795985] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000
[ 29.796179] usb 1-1.4: usb auto-resume
[ 29.843036] usb 1-1.4: finish resume
[ 30.015388] usb usb3: usb auto-resume
[ 30.015410] hub 3-0:1.0: hub_resume
[ 30.015454] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.015469] hub 3-0:1.0: hub_suspend
[ 30.015475] usb usb3: bus auto-suspend, wakeup 1
[ 30.015520] usb usb3: usb auto-resume
[ 30.026802] hub 3-0:1.0: hub_resume
[ 30.026839] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.026865] hub 3-0:1.0: hub_suspend
[ 30.026872] usb usb3: bus auto-suspend, wakeup 1
[ 30.029950] usb usb3: usb auto-resume
[ 30.038875] hub 3-0:1.0: hub_resume
[ 30.038952] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.038970] hub 3-0:1.0: hub_suspend
[ 30.038977] usb usb3: bus auto-suspend, wakeup 1
[ 30.039014] usb usb3: usb auto-resume
[ 30.050856] hub 3-0:1.0: hub_resume
[ 30.050947] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.050977] hub 3-0:1.0: hub_suspend
[ 30.050984] usb usb3: bus auto-suspend, wakeup 1
[ 30.090080] usb usb3: usb auto-resume
[ 30.090101] hub 3-0:1.0: hub_resume
[ 30.090128] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.090142] hub 3-0:1.0: hub_suspend
[ 30.090148] usb usb3: bus auto-suspend, wakeup 1
[ 30.090169] usb usb3: usb auto-resume
[ 30.098738] hub 3-0:1.0: hub_resume
[ 30.098772] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.098792] hub 3-0:1.0: hub_suspend
[ 30.098800] usb usb3: bus auto-suspend, wakeup 1
[ 30.255444] usb usb3: usb auto-resume
[ 30.255466] hub 3-0:1.0: hub_resume
[ 30.255495] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.255514] hub 3-0:1.0: hub_suspend
[ 30.255522] usb usb3: bus auto-suspend, wakeup 1
[ 30.255548] usb usb3: usb auto-resume
[ 30.266611] hub 3-0:1.0: hub_resume
[ 30.266645] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.266666] hub 3-0:1.0: hub_suspend
[ 30.266674] usb usb3: bus auto-suspend, wakeup 1
[ 30.279930] usb usb3: usb auto-resume
[ 30.279950] hub 3-0:1.0: hub_resume
[ 30.279978] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.279997] hub 3-0:1.0: hub_suspend
[ 30.280005] usb usb3: bus auto-suspend, wakeup 1
[ 30.280037] usb usb3: usb auto-resume
[ 30.290614] hub 3-0:1.0: hub_resume
[ 30.290834] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.290851] hub 3-0:1.0: hub_suspend
[ 30.290857] usb usb3: bus auto-suspend, wakeup 1
[ 30.309124] usb usb3: usb auto-resume
[ 30.309145] hub 3-0:1.0: hub_resume
[ 30.309174] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.309194] hub 3-0:1.0: hub_suspend
[ 30.309201] usb usb3: bus auto-suspend, wakeup 1
[ 30.309227] usb usb3: usb auto-resume
[ 30.318636] hub 3-0:1.0: hub_resume
[ 30.318661] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.318673] hub 3-0:1.0: hub_suspend
[ 30.318678] usb usb3: bus auto-suspend, wakeup 1
[ 30.451095] usb usb3: usb auto-resume
[ 30.451116] hub 3-0:1.0: hub_resume
[ 30.451147] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.451165] hub 3-0:1.0: hub_suspend
[ 30.451172] usb usb3: bus auto-suspend, wakeup 1
[ 30.451198] usb usb3: usb auto-resume
[ 30.462472] hub 3-0:1.0: hub_resume
[ 30.462522] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.462540] hub 3-0:1.0: hub_suspend
[ 30.462546] usb usb3: bus auto-suspend, wakeup 1
[ 30.477276] usb usb3: usb auto-resume
[ 30.477296] hub 3-0:1.0: hub_resume
[ 30.477319] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.477331] hub 3-0:1.0: hub_suspend
[ 30.477337] usb usb3: bus auto-suspend, wakeup 1
[ 30.477361] usb usb3: usb auto-resume
[ 30.486450] hub 3-0:1.0: hub_resume
[ 30.486487] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.486500] hub 3-0:1.0: hub_suspend
[ 30.486509] usb usb3: bus auto-suspend, wakeup 1
[ 30.852766] usb usb3: usb auto-resume
[ 30.852789] hub 3-0:1.0: hub_resume
[ 30.852848] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 30.852868] hub 3-0:1.0: hub_suspend
[ 30.852874] usb usb3: bus auto-suspend, wakeup 1
[ 31.151010] usb usb3: usb auto-resume
[ 31.151032] hub 3-0:1.0: hub_resume
[ 31.151062] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 31.151086] hub 3-0:1.0: hub_suspend
[ 31.151092] usb usb3: bus auto-suspend, wakeup 1
[ 31.151120] usb usb3: usb auto-resume
[ 31.165987] hub 3-0:1.0: hub_resume
[ 31.166061] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 31.166099] hub 3-0:1.0: hub_suspend
[ 31.166109] usb usb3: bus auto-suspend, wakeup 1
[ 32.252350] usb usb3: usb auto-resume
[ 32.252370] hub 3-0:1.0: hub_resume
[ 32.252431] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.252447] hub 3-0:1.0: hub_suspend
[ 32.252453] usb usb3: bus auto-suspend, wakeup 1
[ 32.252478] usb usb3: usb auto-resume
[ 32.261208] hub 3-0:1.0: hub_resume
[ 32.261237] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.261256] hub 3-0:1.0: hub_suspend
[ 32.261264] usb usb3: bus auto-suspend, wakeup 1
[ 32.304945] usb usb3: usb auto-resume
[ 32.304969] hub 3-0:1.0: hub_resume
[ 32.305000] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.305024] hub 3-0:1.0: hub_suspend
[ 32.305031] usb usb3: bus auto-suspend, wakeup 1
[ 32.305098] usb usb3: usb auto-resume
[ 32.313167] hub 3-0:1.0: hub_resume
[ 32.313193] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.313209] hub 3-0:1.0: hub_suspend
[ 32.313214] usb usb3: bus auto-suspend, wakeup 1
[ 32.323105] usb usb3: usb auto-resume
[ 32.333172] hub 3-0:1.0: hub_resume
[ 32.333243] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.333260] hub 3-0:1.0: hub_suspend
[ 32.333267] usb usb3: bus auto-suspend, wakeup 1
[ 32.333301] usb usb3: usb auto-resume
[ 32.345145] hub 3-0:1.0: hub_resume
[ 32.345176] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.345198] hub 3-0:1.0: hub_suspend
[ 32.345205] usb usb3: bus auto-suspend, wakeup 1
[ 32.376851] usb usb3: usb auto-resume
[ 32.376872] hub 3-0:1.0: hub_resume
[ 32.376896] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.376915] hub 3-0:1.0: hub_suspend
[ 32.376921] usb usb3: bus auto-suspend, wakeup 1
[ 32.376971] usb usb3: usb auto-resume
[ 32.385217] hub 3-0:1.0: hub_resume
[ 32.385261] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.385274] hub 3-0:1.0: hub_suspend
[ 32.385282] usb usb3: bus auto-suspend, wakeup 1
[ 32.386063] usb usb3: usb auto-resume
[ 32.397100] hub 3-0:1.0: hub_resume
[ 32.397128] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.397147] hub 3-0:1.0: hub_suspend
[ 32.397152] usb usb3: bus auto-suspend, wakeup 1
[ 32.397208] usb usb3: usb auto-resume
[ 32.409128] hub 3-0:1.0: hub_resume
[ 32.409190] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.409198] hub 3-0:1.0: hub_suspend
[ 32.409205] usb usb3: bus auto-suspend, wakeup 1
[ 32.411487] usb usb3: usb auto-resume
[ 32.421194] hub 3-0:1.0: hub_resume
[ 32.421235] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.421264] hub 3-0:1.0: hub_suspend
[ 32.421270] usb usb3: bus auto-suspend, wakeup 1
[ 32.421338] usb usb3: usb auto-resume
[ 32.433112] hub 3-0:1.0: hub_resume
[ 32.433143] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.433160] hub 3-0:1.0: hub_suspend
[ 32.433166] usb usb3: bus auto-suspend, wakeup 1
[ 32.435455] usb usb3: usb auto-resume
[ 32.445067] hub 3-0:1.0: hub_resume
[ 32.445096] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.445126] hub 3-0:1.0: hub_suspend
[ 32.445132] usb usb3: bus auto-suspend, wakeup 1
[ 32.445190] usb usb3: usb auto-resume
[ 32.457121] hub 3-0:1.0: hub_resume
[ 32.457147] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.457166] hub 3-0:1.0: hub_suspend
[ 32.457170] usb usb3: bus auto-suspend, wakeup 1
[ 32.483187] usb usb3: usb auto-resume
[ 32.483210] hub 3-0:1.0: hub_resume
[ 32.483241] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.483264] hub 3-0:1.0: hub_suspend
[ 32.483273] usb usb3: bus auto-suspend, wakeup 1
[ 32.483341] usb usb3: usb auto-resume
[ 32.493161] hub 3-0:1.0: hub_resume
[ 32.493211] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.493229] hub 3-0:1.0: hub_suspend
[ 32.493235] usb usb3: bus auto-suspend, wakeup 1
[ 32.518756] usb usb3: usb auto-resume
[ 32.518778] hub 3-0:1.0: hub_resume
[ 32.518819] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.518835] hub 3-0:1.0: hub_suspend
[ 32.518842] usb usb3: bus auto-suspend, wakeup 1
[ 32.518870] usb usb3: usb auto-resume
[ 32.529114] hub 3-0:1.0: hub_resume
[ 32.529164] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.529183] hub 3-0:1.0: hub_suspend
[ 32.529190] usb usb3: bus auto-suspend, wakeup 1
[ 32.529883] usb usb3: usb auto-resume
[ 32.540996] hub 3-0:1.0: hub_resume
[ 32.541059] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.541076] hub 3-0:1.0: hub_suspend
[ 32.541083] usb usb3: bus auto-suspend, wakeup 1
[ 32.541125] usb usb3: usb auto-resume
[ 32.552990] hub 3-0:1.0: hub_resume
[ 32.553020] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.553039] hub 3-0:1.0: hub_suspend
[ 32.553047] usb usb3: bus auto-suspend, wakeup 1
[ 32.656387] usb usb3: usb auto-resume
[ 32.656408] hub 3-0:1.0: hub_resume
[ 32.656617] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.656650] hub 3-0:1.0: hub_suspend
[ 32.656661] usb usb3: bus auto-suspend, wakeup 1
[ 32.658629] usb usb3: usb auto-resume
[ 32.668907] hub 3-0:1.0: hub_resume
[ 32.668943] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.668980] hub 3-0:1.0: hub_suspend
[ 32.668989] usb usb3: bus auto-suspend, wakeup 1
[ 32.669074] usb usb3: usb auto-resume
[ 32.680916] hub 3-0:1.0: hub_resume
[ 32.681002] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.681024] hub 3-0:1.0: hub_suspend
[ 32.681031] usb usb3: bus auto-suspend, wakeup 1
[ 32.683287] usb usb3: usb auto-resume
[ 32.692919] hub 3-0:1.0: hub_resume
[ 32.692990] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.693020] hub 3-0:1.0: hub_suspend
[ 32.693026] usb usb3: bus auto-suspend, wakeup 1
[ 32.693085] usb usb3: usb auto-resume
[ 32.704912] hub 3-0:1.0: hub_resume
[ 32.704970] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.704987] hub 3-0:1.0: hub_suspend
[ 32.704995] usb usb3: bus auto-suspend, wakeup 1
[ 32.713349] usb usb3: usb auto-resume
[ 32.724939] hub 3-0:1.0: hub_resume
[ 32.724993] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.725013] hub 3-0:1.0: hub_suspend
[ 32.725020] usb usb3: bus auto-suspend, wakeup 1
[ 32.725067] usb usb3: usb auto-resume
[ 32.736910] hub 3-0:1.0: hub_resume
[ 32.736992] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.737009] hub 3-0:1.0: hub_suspend
[ 32.737017] usb usb3: bus auto-suspend, wakeup 1
[ 32.755545] usb usb3: usb auto-resume
[ 32.755568] hub 3-0:1.0: hub_resume
[ 32.755631] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.755680] hub 3-0:1.0: hub_suspend
[ 32.755687] usb usb3: bus auto-suspend, wakeup 1
[ 32.755710] usb usb3: usb auto-resume
[ 32.764871] hub 3-0:1.0: hub_resume
[ 32.764913] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.764933] hub 3-0:1.0: hub_suspend
[ 32.764941] usb usb3: bus auto-suspend, wakeup 1
[ 32.819100] usb usb3: usb auto-resume
[ 32.819125] hub 3-0:1.0: hub_resume
[ 32.819192] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.819259] hub 3-0:1.0: hub_suspend
[ 32.819265] usb usb3: bus auto-suspend, wakeup 1
[ 32.834538] usb usb3: usb auto-resume
[ 32.834561] hub 3-0:1.0: hub_resume
[ 32.834625] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.834642] hub 3-0:1.0: hub_suspend
[ 32.834648] usb usb3: bus auto-suspend, wakeup 1
[ 32.834674] usb usb3: usb auto-resume
[ 32.844795] hub 3-0:1.0: hub_resume
[ 32.844833] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.844853] hub 3-0:1.0: hub_suspend
[ 32.844860] usb usb3: bus auto-suspend, wakeup 1
[ 32.847584] usb usb3: usb auto-resume
[ 32.856824] hub 3-0:1.0: hub_resume
[ 32.856929] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.856947] hub 3-0:1.0: hub_suspend
[ 32.856953] usb usb3: bus auto-suspend, wakeup 1
[ 32.856970] usb usb3: usb auto-resume
[ 32.868815] hub 3-0:1.0: hub_resume
[ 32.868919] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.868936] hub 3-0:1.0: hub_suspend
[ 32.868942] usb usb3: bus auto-suspend, wakeup 1
[ 32.895222] usb usb3: usb auto-resume
[ 32.895245] hub 3-0:1.0: hub_resume
[ 32.895281] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.895302] hub 3-0:1.0: hub_suspend
[ 32.895311] usb usb3: bus auto-suspend, wakeup 1
[ 32.895342] usb usb3: usb auto-resume
[ 32.904829] hub 3-0:1.0: hub_resume
[ 32.904866] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.904900] hub 3-0:1.0: hub_suspend
[ 32.904905] usb usb3: bus auto-suspend, wakeup 1
[ 32.907847] usb usb3: usb auto-resume
[ 32.916799] hub 3-0:1.0: hub_resume
[ 32.916857] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.916930] hub 3-0:1.0: hub_suspend
[ 32.916938] usb usb3: bus auto-suspend, wakeup 1
[ 32.917021] usb usb3: usb auto-resume
[ 32.928729] hub 3-0:1.0: hub_resume
[ 32.928769] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.928821] hub 3-0:1.0: hub_suspend
[ 32.928830] usb usb3: bus auto-suspend, wakeup 1
[ 32.936801] usb usb3: usb auto-resume
[ 32.948749] hub 3-0:1.0: hub_resume
[ 32.948849] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.948868] hub 3-0:1.0: hub_suspend
[ 32.948875] usb usb3: bus auto-suspend, wakeup 1
[ 32.948914] usb usb3: usb auto-resume
[ 32.960700] hub 3-0:1.0: hub_resume
[ 32.960734] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 32.960759] hub 3-0:1.0: hub_suspend
[ 32.960765] usb usb3: bus auto-suspend, wakeup 1
[ 34.000346] usb usb3: usb auto-resume
[ 34.000367] hub 3-0:1.0: hub_resume
[ 34.000427] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.000461] hub 3-0:1.0: hub_suspend
[ 34.000468] usb usb3: bus auto-suspend, wakeup 1
[ 34.307009] usb usb3: usb auto-resume
[ 34.307031] hub 3-0:1.0: hub_resume
[ 34.307092] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.307111] hub 3-0:1.0: hub_suspend
[ 34.307125] usb usb3: bus auto-suspend, wakeup 1
[ 34.332383] usb usb3: usb auto-resume
[ 34.332406] hub 3-0:1.0: hub_resume
[ 34.332448] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.332470] hub 3-0:1.0: hub_suspend
[ 34.332478] usb usb3: bus auto-suspend, wakeup 1
[ 34.332517] usb usb3: usb auto-resume
[ 34.343859] hub 3-0:1.0: hub_resume
[ 34.343903] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.343913] hub 3-0:1.0: hub_suspend
[ 34.343921] usb usb3: bus auto-suspend, wakeup 1
[ 34.346866] usb usb3: usb auto-resume
[ 34.355848] hub 3-0:1.0: hub_resume
[ 34.355898] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.355923] hub 3-0:1.0: hub_suspend
[ 34.355930] usb usb3: bus auto-suspend, wakeup 1
[ 34.355964] usb usb3: usb auto-resume
[ 34.367806] hub 3-0:1.0: hub_resume
[ 34.367881] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.367903] hub 3-0:1.0: hub_suspend
[ 34.367910] usb usb3: bus auto-suspend, wakeup 1
[ 34.370900] usb usb3: usb auto-resume
[ 34.379853] hub 3-0:1.0: hub_resume
[ 34.379926] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.379938] hub 3-0:1.0: hub_suspend
[ 34.379947] usb usb3: bus auto-suspend, wakeup 1
[ 34.380022] usb usb3: usb auto-resume
[ 34.391778] hub 3-0:1.0: hub_resume
[ 34.391844] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.391864] hub 3-0:1.0: hub_suspend
[ 34.391871] usb usb3: bus auto-suspend, wakeup 1
[ 34.437779] usb usb3: usb auto-resume
[ 34.437800] hub 3-0:1.0: hub_resume
[ 34.437859] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.437876] hub 3-0:1.0: hub_suspend
[ 34.437882] usb usb3: bus auto-suspend, wakeup 1
[ 34.452844] usb usb3: usb auto-resume
[ 34.452865] hub 3-0:1.0: hub_resume
[ 34.452923] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.452941] hub 3-0:1.0: hub_suspend
[ 34.452947] usb usb3: bus auto-suspend, wakeup 1
[ 34.560091] usb usb3: usb auto-resume
[ 34.560113] hub 3-0:1.0: hub_resume
[ 34.560140] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.560157] hub 3-0:1.0: hub_suspend
[ 34.560165] usb usb3: bus auto-suspend, wakeup 1
[ 34.560212] usb usb3: usb auto-resume
[ 34.571729] hub 3-0:1.0: hub_resume
[ 34.571760] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 34.571775] hub 3-0:1.0: hub_suspend
[ 34.571781] usb usb3: bus auto-suspend, wakeup 1
[ 36.790069] usb 1-1.4: usb auto-suspend, wakeup 0
[ 36.805976] hub 1-1:1.0: hub_suspend
[ 36.805987] usb 1-1: unlink qh256-0001/ffff8801187717c0 start 1 [1/0 us]
[ 36.808338] usb 1-1: usb auto-suspend, wakeup 1
[ 36.821979] hub 1-0:1.0: hub_suspend
[ 36.822001] usb usb1: bus auto-suspend, wakeup 1
[ 36.822008] ehci-pci 0000:00:1a.0: suspend root hub
[ 44.091273] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 44.122446] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
[-- Attachment #3: config-3.10.0-next20130701-1-iniza-small --]
[-- Type: application/octet-stream, Size: 114284 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 3.10.0 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_FHANDLE=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_RCU_USER_QS=y
CONFIG_CONTEXT_TRACKING_FORCE=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_NONE=y
# CONFIG_RCU_NOCB_CPU_ZERO is not set
# CONFIG_RCU_NOCB_CPU_ALL is not set
CONFIG_IKCONFIG=m
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
# CONFIG_NUMA_BALANCING is not set
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
# CONFIG_MEMCG_SWAP_ENABLED is not set
# CONFIG_MEMCG_KMEM is not set
CONFIG_CGROUP_HUGETLB=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
# CONFIG_RD_LZ4 is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
CONFIG_MODULE_SIG_SHA512=y
CONFIG_MODULE_SIG_HASH="sha512"
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_NUMACHIP=y
# CONFIG_X86_VSMP is not set
# CONFIG_X86_UV is not set
# CONFIG_X86_INTEL_LPSS is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=500
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
CONFIG_KVM_GUEST=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=256
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_MICROCODE_INTEL_LIB=y
CONFIG_MICROCODE_INTEL_EARLY=y
CONFIG_MICROCODE_AMD_EARLY=y
CONFIG_MICROCODE_EARLY=y
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_MOVABLE_NODE is not set
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NEED_BOUNCE_POOL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
# CONFIG_ZBUD is not set
# CONFIG_ZSWAP is not set
# CONFIG_MEM_SOFT_DIRTY is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not set
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_I2C=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
CONFIG_SFI=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# x86 CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not set
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_ACPI is not set
CONFIG_HOTPLUG_PCI_CPCI=y
# CONFIG_HOTPLUG_PCI_CPCI_ZT5550 is not set
# CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_DMA_ENGINE=y
# CONFIG_RAPIDIO_DEBUG is not set
# CONFIG_RAPIDIO_ENUM_BASIC is not set
CONFIG_RAPIDIO_TSI57X=y
CONFIG_RAPIDIO_CPS_XX=y
CONFIG_RAPIDIO_TSI568=y
CONFIG_RAPIDIO_CPS_GEN2=y
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_X86_X32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_GRE is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=m
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_SCH_PLUG is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_NET_MPLS_GSO is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_NET_LL_RX_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HIDP is not set
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_BT_ATH3K is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
CONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
# CONFIG_XEN_BLKDEV_BACKEND is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
# CONFIG_BLOCKCONSOLE is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
# CONFIG_VMWARE_VMCI is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_CHELSIO_FCOE is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_HIGHBANK is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_RCAR is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARASAN_CF is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=y
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=m
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_RIONET is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
# CONFIG_VHOST_NET is not set
#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
CONFIG_NET_CADENCE=y
# CONFIG_ARM_AT91_ETHER is not set
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_PCH_GBE is not set
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
CONFIG_R8169=m
# CONFIG_SH_ETH is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
# CONFIG_SFC is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_AT803X_PHY=y
CONFIG_AMD_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_BCM87XX_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_GPIO=y
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_FILTER=y
# CONFIG_PPP_MPPE is not set
CONFIG_PPP_MULTILINK=y
# CONFIG_PPPOE is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_ATH_CARDS is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLWIFI=m
CONFIG_IWLDVM=m
# CONFIG_IWLMVM is not set
CONFIG_IWLWIFI_OPMODE_MODULAR=y
#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWLWIFI_DEBUGFS=y
# CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE is not set
CONFIG_IWLWIFI_DEVICE_TRACING=y
# CONFIG_IWLWIFI_P2P is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTLWIFI is not set
CONFIG_WL_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set
# CONFIG_CW1200 is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
# CONFIG_HDLC is not set
# CONFIG_DLCI is not set
# CONFIG_SBNI is not set
CONFIG_XEN_NETDEV_FRONTEND=y
# CONFIG_XEN_NETDEV_BACKEND is not set
# CONFIG_VMXNET3 is not set
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
# CONFIG_ISDN_CAPI is not set
# CONFIG_ISDN_DRV_GIGASET is not set
# CONFIG_HYSDN is not set
# CONFIG_MISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_STMPE is not set
# CONFIG_KEYBOARD_TC3589X is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_JOYSTICK_WALKERA0701 is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_88PM860X is not set
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_DA9034 is not set
# CONFIG_TOUCHSCREEN_DA9052 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WM831X is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_PCAP is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMPE is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_88PM860X_ONKEY is not set
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MAX8925_ONKEY is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_TWL6040_VIBRA is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA9052_ONKEY is not set
# CONFIG_INPUT_DA9055_ONKEY is not set
# CONFIG_INPUT_WM831X_ON is not set
# CONFIG_INPUT_PCAP is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_XEN_KBDDEV_FRONTEND is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_NOZOMI is not set
# CONFIG_ISI is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=32
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_DW is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_KGDB_NMI=y
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_MAX310X=y
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
CONFIG_TTY_PRINTK=y
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_HW_RANDOM_TPM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
# CONFIG_TCG_ST33_I2C is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_HSI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_ACPI=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
# CONFIG_GPIO_DA9052 is not set
# CONFIG_GPIO_DA9055 is not set
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_TS5500 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_LYNXPOINT is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_SX150X=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
# CONFIG_GPIO_TPS65912 is not set
# CONFIG_GPIO_TWL6040 is not set
# CONFIG_GPIO_WM831X is not set
# CONFIG_GPIO_WM8350 is not set
# CONFIG_GPIO_WM8994 is not set
# CONFIG_GPIO_ADP5520 is not set
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_AMD8111 is not set
CONFIG_GPIO_LANGWELL=y
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
# CONFIG_GPIO_PALMAS is not set
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
#
# USB GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_MAX8925_POWER is not set
# CONFIG_WM831X_BACKUP is not set
# CONFIG_WM831X_POWER is not set
# CONFIG_WM8350_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_DA9030 is not set
# CONFIG_BATTERY_DA9052 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_CHARGER_TPS65090 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_AVS=y
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DA9052_ADC is not set
# CONFIG_SENSORS_DA9055 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_WM831X is not set
# CONFIG_SENSORS_WM8350 is not set
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_CPU_THERMAL=y
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=m
#
# Texas Instruments thermal drivers
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_DA9052_WATCHDOG is not set
# CONFIG_DA9055_WATCHDOG is not set
# CONFIG_WM831X_WATCHDOG is not set
# CONFIG_WM8350_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_XEN_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_AS3711 is not set
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_CROS_EC is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
CONFIG_HTC_I2CPLD=y
CONFIG_LPC_ICH=m
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX8907 is not set
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_EZX_PCAP=y
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
CONFIG_MFD_RC5T583=y
CONFIG_MFD_SEC_CORE=y
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SMSC=y
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
# CONFIG_AB3100_OTP is not set
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
CONFIG_STMPE_SPI=y
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_MFD_LP8788=y
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
CONFIG_TWL6040_CORE=y
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_AAT2870 is not set
# CONFIG_REGULATOR_DA903X is not set
# CONFIG_REGULATOR_DA9052 is not set
# CONFIG_REGULATOR_DA9055 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_88PM8607=y
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8925 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_MAX8997 is not set
# CONFIG_REGULATOR_MAX8998 is not set
# CONFIG_REGULATOR_MAX77686 is not set
# CONFIG_REGULATOR_MAX77693 is not set
# CONFIG_REGULATOR_PCAP is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=y
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LP8788=y
# CONFIG_REGULATOR_RC5T583 is not set
# CONFIG_REGULATOR_S2MPS11 is not set
# CONFIG_REGULATOR_S5M8767 is not set
# CONFIG_REGULATOR_AB3100 is not set
# CONFIG_REGULATOR_PALMAS is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65090 is not set
# CONFIG_REGULATOR_TPS6524X is not set
# CONFIG_REGULATOR_TPS6586X is not set
# CONFIG_REGULATOR_TPS65910 is not set
# CONFIG_REGULATOR_TPS65912 is not set
# CONFIG_REGULATOR_WM831X is not set
# CONFIG_REGULATOR_WM8350 is not set
# CONFIG_REGULATOR_WM8400 is not set
# CONFIG_REGULATOR_WM8994 is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
# CONFIG_VIDEO_V4L2_INT_DEVICE is not set
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
# CONFIG_TTPCI_EEPROM is not set
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
#
# Media drivers
#
CONFIG_RC_CORE=m
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
# CONFIG_LIRC is not set
# CONFIG_IR_NEC_DECODER is not set
# CONFIG_IR_RC5_DECODER is not set
# CONFIG_IR_RC6_DECODER is not set
# CONFIG_IR_JVC_DECODER is not set
# CONFIG_IR_SONY_DECODER is not set
# CONFIG_IR_RC5_SZ_DECODER is not set
# CONFIG_IR_SANYO_DECODER is not set
# CONFIG_IR_MCE_KBD_DECODER is not set
CONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_IR_ENE is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_ITE_CIR is not set
# CONFIG_IR_FINTEK is not set
# CONFIG_IR_NUVOTON is not set
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_WINBOND_CIR is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_IR_GPIO_CIR is not set
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_USB_PWC is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_VIDEO_USBTV is not set
#
# Analog TV USB devices
#
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_TLG2300 is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_VIDEO_STK1160 is not set
#
# Analog/digital TV USB devices
#
# CONFIG_VIDEO_AU0828 is not set
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_TM6000 is not set
#
# Digital TV USB devices
#
# CONFIG_DVB_USB is not set
# CONFIG_DVB_USB_V2 is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_SMS_USB_DRV is not set
# CONFIG_DVB_B2C2_FLEXCOP_USB is not set
#
# Webcam, TV (analog/digital) USB devices
#
# CONFIG_VIDEO_EM28XX is not set
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
#
# Media capture/analog TV support
#
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
#
# Media capture/analog/hybrid TV support
#
# CONFIG_VIDEO_CX18 is not set
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_CX25821 is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_SAA7164 is not set
#
# Media digital TV PCI Adapters
#
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set
# CONFIG_DVB_B2C2_FLEXCOP_PCI is not set
# CONFIG_DVB_PLUTO2 is not set
# CONFIG_DVB_DM1105 is not set
# CONFIG_DVB_PT1 is not set
# CONFIG_MANTIS_CORE is not set
# CONFIG_DVB_NGENE is not set
# CONFIG_DVB_DDBRIDGE is not set
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_VIDEO_TIMBERDALE is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
# CONFIG_VIDEO_SH_VEU is not set
CONFIG_V4L_TEST_DRIVERS=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_MEM2MEM_TESTDEV is not set
#
# Supported MMC/SDIO adapters
#
# CONFIG_SMS_SDIO_DRV is not set
CONFIG_MEDIA_PARPORT_SUPPORT=y
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_SI470X=y
# CONFIG_USB_SI470X is not set
# CONFIG_I2C_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_I2C_SI4713 is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set
#
# Texas Instruments WL128x FM driver (ST based)
#
# CONFIG_RADIO_WL128X is not set
# CONFIG_CYPRESS_FIRMWARE is not set
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
#
# RDS decoders
#
#
# Video decoders
#
#
# Video and audio decoders
#
#
# Video encoders
#
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
#
# Miscelaneous helper chips
#
#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MC44S803=m
#
# Multistandard (satellite) frontends
#
#
# Multistandard (cable + terrestrial) frontends
#
#
# DVB-S (satellite) frontends
#
#
# DVB-T (terrestrial) frontends
#
#
# DVB-C (cable) frontends
#
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
#
# ISDB-T (terrestrial) frontends
#
#
# Digital terrestrial only tuners/PLL
#
#
# SEC control devices for DVB-S
#
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
CONFIG_AGP_VIA=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_I810 is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_HDMI=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
CONFIG_EXYNOS_VIDEO=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
# CONFIG_BACKLIGHT_DA903X is not set
# CONFIG_BACKLIGHT_DA9052 is not set
# CONFIG_BACKLIGHT_MAX8925 is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_WM831X is not set
# CONFIG_BACKLIGHT_ADP5520 is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_88PM860X is not set
# CONFIG_BACKLIGHT_AAT2870 is not set
# CONFIG_BACKLIGHT_LM3630 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_LP8788 is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
# CONFIG_SND_HDA_I915 is not set
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
#
# HID support
#
CONFIG_HID=m
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=m
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_HUION is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=m
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FUSBH200_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_CHIPIDEA is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_PHY is not set
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
# CONFIG_MMC_RICOH_MMC is not set
# CONFIG_MMC_SDHCI_ACPI is not set
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8788 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_WM831X_STATUS is not set
# CONFIG_LEDS_WM8350 is not set
# CONFIG_LEDS_DA903X is not set
# CONFIG_LEDS_DA9052 is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_ADP5520 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_MAX8997 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_BLINKM is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_DECODE_MCE is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_88PM860X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_LP8788 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_MAX8925 is not set
# CONFIG_RTC_DRV_MAX8998 is not set
# CONFIG_RTC_DRV_MAX8997 is not set
# CONFIG_RTC_DRV_MAX77686 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PALMAS is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_TPS6586X is not set
# CONFIG_RTC_DRV_TPS65910 is not set
# CONFIG_RTC_DRV_RC5T583 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_RX4581 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DA9052 is not set
# CONFIG_RTC_DRV_DA9055 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_WM831X is not set
# CONFIG_RTC_DRV_WM8350 is not set
# CONFIG_RTC_DRV_AB3100 is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_PCAP is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_DW_DMAC_CORE is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_PCH_DMA is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
CONFIG_AUXDISPLAY=y
# CONFIG_KS0108 is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SELFBALLOONING=y
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
CONFIG_XEN_SCRUB_PAGES=y
# CONFIG_XEN_DEV_EVTCHN is not set
CONFIG_XEN_BACKEND=y
# CONFIG_XENFS is not set
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
# CONFIG_XEN_PCIDEV_BACKEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=y
CONFIG_XEN_MCE_LOG=y
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_STAGING=y
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_W35UND is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_PANEL is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
# CONFIG_RTS5139 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_DX_SEP is not set
CONFIG_ZSMALLOC=y
# CONFIG_ZRAM is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_FB_XGI is not set
# CONFIG_ACPI_QUICKSTART is not set
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
CONFIG_STAGING_MEDIA=y
# CONFIG_DVB_AS102 is not set
# CONFIG_DVB_CXD2099 is not set
# CONFIG_VIDEO_DT3155 is not set
# CONFIG_VIDEO_GO7007 is not set
# CONFIG_SOLO6X10 is not set
#
# Android
#
CONFIG_ANDROID=y
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ASHMEM=y
# CONFIG_ANDROID_LOGGER is not set
CONFIG_ANDROID_TIMED_OUTPUT=y
# CONFIG_ANDROID_TIMED_GPIO is not set
CONFIG_ANDROID_LOW_MEMORY_KILLER=y
CONFIG_ANDROID_INTF_ALARM_DEV=y
# CONFIG_SYNC is not set
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_CSR_WIFI is not set
CONFIG_NET_VENDOR_SILICOM=y
# CONFIG_SBYPASS is not set
# CONFIG_BPCTL is not set
# CONFIG_CED1401 is not set
# CONFIG_DGRP is not set
# CONFIG_ZCACHE is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_BTMTK is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_CHROMEOS_LAPTOP is not set
# CONFIG_DELL_WMI is not set
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ASUS_WMI is not set
CONFIG_ACPI_WMI=m
# CONFIG_MSI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
CONFIG_SAMSUNG_LAPTOP=m
# CONFIG_MXM_WMI is not set
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_PVPANIC is not set
#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_STATS=y
# CONFIG_AMD_IOMMU_V2 is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y
#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers
#
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
#
# DEVFREQ Drivers
#
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_MAX77693 is not set
# CONFIG_EXTCON_MAX8997 is not set
# CONFIG_EXTCON_PALMAS is not set
CONFIG_MEMORY=y
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_VARS_PSTORE=y
# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=y
# CONFIG_ECRYPT_FS_MESSAGING is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_FTRACE is not set
# CONFIG_PSTORE_RAM is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_EFIVAR_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
# CONFIG_DEBUG_OBJECTS_FREE is not set
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
#
# RCU Debugging
#
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_UPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
# CONFIG_MMIOTRACE_TEST is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_PATH=y
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_SECURITY_SMACK=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
CONFIG_SECURITY_YAMA=y
CONFIG_SECURITY_YAMA_STACKED=y
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_AUDIT=y
# CONFIG_INTEGRITY_ASYMMETRIC_KEYS is not set
# CONFIG_IMA is not set
CONFIG_EVM=y
CONFIG_EVM_HMAC_VERSION=2
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_YAMA is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="apparmor"
CONFIG_XOR_BLOCKS=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ABLK_HELPER_X86=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_AES_NI_INTEL=m
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
# CONFIG_CRYPTO_DEV_PADLOCK_AES is not set
# CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_MMU_AUDIT is not set
CONFIG_KVM_DEVICE_ASSIGNMENT=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_PERCPU_RWSEM=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
CONFIG_DDR=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
[-- Attachment #4: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ]
2013-07-01 8:49 linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ] Sedat Dilek
@ 2013-07-01 8:52 ` Daniel Vetter
2013-07-01 9:03 ` Sedat Dilek
0 siblings, 1 reply; 13+ messages in thread
From: Daniel Vetter @ 2013-07-01 8:52 UTC (permalink / raw)
To: Sedat Dilek, Barnes, Jesse
Cc: Stephen Rothwell, linux-next, Linux Kernel Mailing List,
intel-gfx, DRI, Dave Airlie
On Mon, Jul 1, 2013 at 10:49 AM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> On Mon, Jul 1, 2013 at 9:59 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>> Hi all,
>>
>> Changes since 20130628:
>>
>> The regulator tree gained a build failure so I used the version from
>> next-20130628.
>>
>> The trivial tree gained a conflict against the fbdev tree.
>>
>> The arm-soc tree gained a conflict against the net-next tree.
>>
>> The akpm tree lost a few patches that turned up elsewhere and I removed 2
>> that were causing run time problems.
>>
>
> [ CC drm and drm-intel folks ]
>
> [ Did not check any relevant MLs ]
>
> Please, see attached dmesg output.
Clock mismatch, one for Jesse to figure out. Note that this patch is
for 3.12, I simply haven't yet gotten around to properly split my
patch queue so a few spilled into -next. I'll do that now.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ]
2013-07-01 8:52 ` Daniel Vetter
@ 2013-07-01 9:03 ` Sedat Dilek
2013-07-02 5:31 ` Sedat Dilek
0 siblings, 1 reply; 13+ messages in thread
From: Sedat Dilek @ 2013-07-01 9:03 UTC (permalink / raw)
To: Daniel Vetter
Cc: Barnes, Jesse, Stephen Rothwell, linux-next,
Linux Kernel Mailing List, intel-gfx, DRI, Dave Airlie
On Mon, Jul 1, 2013 at 10:52 AM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote:
> On Mon, Jul 1, 2013 at 10:49 AM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>> On Mon, Jul 1, 2013 at 9:59 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>>> Hi all,
>>>
>>> Changes since 20130628:
>>>
>>> The regulator tree gained a build failure so I used the version from
>>> next-20130628.
>>>
>>> The trivial tree gained a conflict against the fbdev tree.
>>>
>>> The arm-soc tree gained a conflict against the net-next tree.
>>>
>>> The akpm tree lost a few patches that turned up elsewhere and I removed 2
>>> that were causing run time problems.
>>>
>>
>> [ CC drm and drm-intel folks ]
>>
>> [ Did not check any relevant MLs ]
>>
>> Please, see attached dmesg output.
>
> Clock mismatch, one for Jesse to figure out. Note that this patch is
> for 3.12, I simply haven't yet gotten around to properly split my
> patch queue so a few spilled into -next. I'll do that now.
I like lightspeed-fast replies :-).
Guess "drm/i915: get mode clock when reading the pipe config v9" [1]
is the cause.
- Sedat -
[1] http://cgit.freedesktop.org/~danvet/drm-intel/commit/?h=drm-intel-next-queued&id=d325d8b4f351f9d45e7c8baabf581fd21f343133
> -Daniel
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ]
2013-07-01 9:03 ` Sedat Dilek
@ 2013-07-02 5:31 ` Sedat Dilek
[not found] ` <CA+icZUW3K7RyUcfdos7aOkrEOd3To0kSns+G3GSfkPqqwo7z=w@mail.gmail.com>
0 siblings, 1 reply; 13+ messages in thread
From: Sedat Dilek @ 2013-07-02 5:31 UTC (permalink / raw)
To: Daniel Vetter
Cc: Barnes, Jesse, Stephen Rothwell, linux-next,
Linux Kernel Mailing List, intel-gfx, DRI, Dave Airlie
On Mon, Jul 1, 2013 at 11:03 AM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> On Mon, Jul 1, 2013 at 10:52 AM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote:
>> On Mon, Jul 1, 2013 at 10:49 AM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>>> On Mon, Jul 1, 2013 at 9:59 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>>>> Hi all,
>>>>
>>>> Changes since 20130628:
>>>>
>>>> The regulator tree gained a build failure so I used the version from
>>>> next-20130628.
>>>>
>>>> The trivial tree gained a conflict against the fbdev tree.
>>>>
>>>> The arm-soc tree gained a conflict against the net-next tree.
>>>>
>>>> The akpm tree lost a few patches that turned up elsewhere and I removed 2
>>>> that were causing run time problems.
>>>>
>>>
>>> [ CC drm and drm-intel folks ]
>>>
>>> [ Did not check any relevant MLs ]
>>>
>>> Please, see attached dmesg output.
>>
>> Clock mismatch, one for Jesse to figure out. Note that this patch is
>> for 3.12, I simply haven't yet gotten around to properly split my
>> patch queue so a few spilled into -next. I'll do that now.
>
> I like lightspeed-fast replies :-).
>
> Guess "drm/i915: get mode clock when reading the pipe config v9" [1]
> is the cause.
>
Problem solved by applying these patches to next-20130701 from
intel-gfx patchwork-service [0]:
[1/2] drm/i915: fixup messages in pipe_config_compare
[2/2] drm/i915: get clock config when checking CRTC state too
AFAICS 2/2 was folded into updated "drm/i915: get mode clock when
reading the pipe config v9" [3].
It would be kind to be CCed on the patches and get also some credits.
Also a CC to the report in linux-next should IMHO be done.
- Sedat -
[0] https://patchwork.kernel.org/project/intel-gfx/list/
[1] https://patchwork.kernel.org/patch/2809031/
[2] https://patchwork.kernel.org/patch/2809021/
[3] http://cgit.freedesktop.org/~danvet/drm-intel/commit/?h=drm-intel-nightly&id=f1f644dc66cbaf5a4c7dcde683361536b41885b9
> - Sedat -
>
> [1] http://cgit.freedesktop.org/~danvet/drm-intel/commit/?h=drm-intel-next-queued&id=d325d8b4f351f9d45e7c8baabf581fd21f343133
>
>> -Daniel
>> --
>> Daniel Vetter
>> Software Engineer, Intel Corporation
>> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Fwd: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ]
[not found] ` <CA+icZUW3K7RyUcfdos7aOkrEOd3To0kSns+G3GSfkPqqwo7z=w@mail.gmail.com>
@ 2013-08-26 13:05 ` Michael S. Tsirkin
2013-08-26 17:28 ` (unknown) Michael S. Tsirkin
2013-09-22 14:14 ` Fwd: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ] Michael S. Tsirkin
0 siblings, 2 replies; 13+ messages in thread
From: Michael S. Tsirkin @ 2013-08-26 13:05 UTC (permalink / raw)
To: Sedat Dilek
Cc: Barnes, Jesse, Stephen Rothwell, linux-next,
Linux Kernel Mailing List, intel-gfx, DRI, Dave Airlie
On Wed, Aug 21, 2013 at 11:22:58AM +0200, Sedat Dilek wrote:
> [ Re: [Intel-gfx] i915 producing warnings with kernel 3.11-rc5 ]
>
> Hi,
>
> saw your posting in [1]... can you try the patches below?
> Not sure if they apply.
> Did you try v3.11-rc6(+)... or drm-intel-nightly?
>
> Regards,
> - Sedat -
>
> [1] http://lists.freedesktop.org/archives/intel-gfx/2013-August/032154.html
Same thing observed with v3.11-rc7.
>
> ---------- Forwarded message ----------
> From: Sedat Dilek <sedat.dilek@gmail.com>
> Date: Tue, Jul 2, 2013 at 7:31 AM
> Subject: Re: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ]
> To: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: "Barnes, Jesse" <jbarnes@virtuousgeek.org>, Stephen Rothwell
> <sfr@canb.auug.org.au>, linux-next <linux-next@vger.kernel.org>, Linux
> Kernel Mailing List <linux-kernel@vger.kernel.org>, intel-gfx
> <intel-gfx@lists.freedesktop.org>, DRI
> <dri-devel@lists.freedesktop.org>, Dave Airlie <airlied@gmail.com>
>
>
> On Mon, Jul 1, 2013 at 11:03 AM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> > On Mon, Jul 1, 2013 at 10:52 AM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote:
> >> On Mon, Jul 1, 2013 at 10:49 AM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> >>> On Mon, Jul 1, 2013 at 9:59 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> >>>> Hi all,
> >>>>
> >>>> Changes since 20130628:
> >>>>
> >>>> The regulator tree gained a build failure so I used the version from
> >>>> next-20130628.
> >>>>
> >>>> The trivial tree gained a conflict against the fbdev tree.
> >>>>
> >>>> The arm-soc tree gained a conflict against the net-next tree.
> >>>>
> >>>> The akpm tree lost a few patches that turned up elsewhere and I removed 2
> >>>> that were causing run time problems.
> >>>>
> >>>
> >>> [ CC drm and drm-intel folks ]
> >>>
> >>> [ Did not check any relevant MLs ]
> >>>
> >>> Please, see attached dmesg output.
> >>
> >> Clock mismatch, one for Jesse to figure out. Note that this patch is
> >> for 3.12, I simply haven't yet gotten around to properly split my
> >> patch queue so a few spilled into -next. I'll do that now.
> >
> > I like lightspeed-fast replies :-).
> >
> > Guess "drm/i915: get mode clock when reading the pipe config v9" [1]
> > is the cause.
> >
>
> Problem solved by applying these patches to next-20130701 from
> intel-gfx patchwork-service [0]:
>
> [1/2] drm/i915: fixup messages in pipe_config_compare
> [2/2] drm/i915: get clock config when checking CRTC state too
>
> AFAICS 2/2 was folded into updated "drm/i915: get mode clock when
> reading the pipe config v9" [3].
>
> It would be kind to be CCed on the patches and get also some credits.
> Also a CC to the report in linux-next should IMHO be done.
>
> - Sedat -
>
> [0] https://patchwork.kernel.org/project/intel-gfx/list/
> [1] https://patchwork.kernel.org/patch/2809031/
> [2] https://patchwork.kernel.org/patch/2809021/
> [3] http://cgit.freedesktop.org/~danvet/drm-intel/commit/?h=drm-intel-nightly&id=f1f644dc66cbaf5a4c7dcde683361536b41885b9
>
> > - Sedat -
> >
> > [1] http://cgit.freedesktop.org/~danvet/drm-intel/commit/?h=drm-intel-next-queued&id=d325d8b4f351f9d45e7c8baabf581fd21f343133
> >
> >> -Daniel
> >> --
> >> Daniel Vetter
> >> Software Engineer, Intel Corporation
> >> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 13+ messages in thread
* (unknown)
2013-08-26 13:05 ` Fwd: " Michael S. Tsirkin
@ 2013-08-26 17:28 ` Michael S. Tsirkin
2013-09-22 14:14 ` Fwd: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ] Michael S. Tsirkin
1 sibling, 0 replies; 13+ messages in thread
From: Michael S. Tsirkin @ 2013-08-26 17:28 UTC (permalink / raw)
To: Sedat Dilek
Cc: Barnes, Jesse, Stephen Rothwell, linux-next,
Linux Kernel Mailing List, intel-gfx, DRI, Dave Airlie
On Mon, Aug 26, 2013 at 04:05:11PM +0300, Michael S. Tsirkin wrote:
> On Wed, Aug 21, 2013 at 11:22:58AM +0200, Sedat Dilek wrote:
> > [ Re: [Intel-gfx] i915 producing warnings with kernel 3.11-rc5 ]
> >
> > Hi,
> >
> > saw your posting in [1]... can you try the patches below?
> > Not sure if they apply.
> > Did you try v3.11-rc6(+)... or drm-intel-nightly?
> >
> > Regards,
> > - Sedat -
> >
> > [1] http://lists.freedesktop.org/archives/intel-gfx/2013-August/032154.html
>
> Same thing observed with v3.11-rc7.
Looks like when this happens, external monitor does not work.
It shows this message:
"not optimum mode: recommended mode 1280x1024 60Hz"
while this is exactly what I configured in xrandr.
>
> >
> > ---------- Forwarded message ----------
> > From: Sedat Dilek <sedat.dilek@gmail.com>
> > Date: Tue, Jul 2, 2013 at 7:31 AM
> > Subject: Re: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ]
> > To: Daniel Vetter <daniel.vetter@ffwll.ch>
> > Cc: "Barnes, Jesse" <jbarnes@virtuousgeek.org>, Stephen Rothwell
> > <sfr@canb.auug.org.au>, linux-next <linux-next@vger.kernel.org>, Linux
> > Kernel Mailing List <linux-kernel@vger.kernel.org>, intel-gfx
> > <intel-gfx@lists.freedesktop.org>, DRI
> > <dri-devel@lists.freedesktop.org>, Dave Airlie <airlied@gmail.com>
> >
> >
> > On Mon, Jul 1, 2013 at 11:03 AM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> > > On Mon, Jul 1, 2013 at 10:52 AM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote:
> > >> On Mon, Jul 1, 2013 at 10:49 AM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> > >>> On Mon, Jul 1, 2013 at 9:59 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> > >>>> Hi all,
> > >>>>
> > >>>> Changes since 20130628:
> > >>>>
> > >>>> The regulator tree gained a build failure so I used the version from
> > >>>> next-20130628.
> > >>>>
> > >>>> The trivial tree gained a conflict against the fbdev tree.
> > >>>>
> > >>>> The arm-soc tree gained a conflict against the net-next tree.
> > >>>>
> > >>>> The akpm tree lost a few patches that turned up elsewhere and I removed 2
> > >>>> that were causing run time problems.
> > >>>>
> > >>>
> > >>> [ CC drm and drm-intel folks ]
> > >>>
> > >>> [ Did not check any relevant MLs ]
> > >>>
> > >>> Please, see attached dmesg output.
> > >>
> > >> Clock mismatch, one for Jesse to figure out. Note that this patch is
> > >> for 3.12, I simply haven't yet gotten around to properly split my
> > >> patch queue so a few spilled into -next. I'll do that now.
> > >
> > > I like lightspeed-fast replies :-).
> > >
> > > Guess "drm/i915: get mode clock when reading the pipe config v9" [1]
> > > is the cause.
> > >
> >
> > Problem solved by applying these patches to next-20130701 from
> > intel-gfx patchwork-service [0]:
> >
> > [1/2] drm/i915: fixup messages in pipe_config_compare
> > [2/2] drm/i915: get clock config when checking CRTC state too
> >
> > AFAICS 2/2 was folded into updated "drm/i915: get mode clock when
> > reading the pipe config v9" [3].
> >
> > It would be kind to be CCed on the patches and get also some credits.
> > Also a CC to the report in linux-next should IMHO be done.
> >
> > - Sedat -
> >
> > [0] https://patchwork.kernel.org/project/intel-gfx/list/
> > [1] https://patchwork.kernel.org/patch/2809031/
> > [2] https://patchwork.kernel.org/patch/2809021/
> > [3] http://cgit.freedesktop.org/~danvet/drm-intel/commit/?h=drm-intel-nightly&id=f1f644dc66cbaf5a4c7dcde683361536b41885b9
> >
> > > - Sedat -
> > >
> > > [1] http://cgit.freedesktop.org/~danvet/drm-intel/commit/?h=drm-intel-next-queued&id=d325d8b4f351f9d45e7c8baabf581fd21f343133
> > >
> > >> -Daniel
> > >> --
> > >> Daniel Vetter
> > >> Software Engineer, Intel Corporation
> > >> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Fwd: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ]
2013-08-26 13:05 ` Fwd: " Michael S. Tsirkin
2013-08-26 17:28 ` (unknown) Michael S. Tsirkin
@ 2013-09-22 14:14 ` Michael S. Tsirkin
2013-09-25 3:17 ` Dave Airlie
1 sibling, 1 reply; 13+ messages in thread
From: Michael S. Tsirkin @ 2013-09-22 14:14 UTC (permalink / raw)
To: Sedat Dilek
Cc: Stephen Rothwell, intel-gfx, Linux Kernel Mailing List, DRI, linux-next
On Mon, Aug 26, 2013 at 04:05:11PM +0300, Michael S. Tsirkin wrote:
> On Wed, Aug 21, 2013 at 11:22:58AM +0200, Sedat Dilek wrote:
> > [ Re: [Intel-gfx] i915 producing warnings with kernel 3.11-rc5 ]
> >
> > Hi,
> >
> > saw your posting in [1]... can you try the patches below?
> > Not sure if they apply.
> > Did you try v3.11-rc6(+)... or drm-intel-nightly?
> >
> > Regards,
> > - Sedat -
> >
> > [1] http://lists.freedesktop.org/archives/intel-gfx/2013-August/032154.html
>
> Same thing observed with v3.11-rc7.
I still see this with 3.11.
Following this message, my VGA monitor goes blank and
shows an error suggesting a wrong resolution or frequency are set.
Anyone?
>
> >
> > ---------- Forwarded message ----------
> > From: Sedat Dilek <sedat.dilek@gmail.com>
> > Date: Tue, Jul 2, 2013 at 7:31 AM
> > Subject: Re: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ]
> > To: Daniel Vetter <daniel.vetter@ffwll.ch>
> > Cc: "Barnes, Jesse" <jbarnes@virtuousgeek.org>, Stephen Rothwell
> > <sfr@canb.auug.org.au>, linux-next <linux-next@vger.kernel.org>, Linux
> > Kernel Mailing List <linux-kernel@vger.kernel.org>, intel-gfx
> > <intel-gfx@lists.freedesktop.org>, DRI
> > <dri-devel@lists.freedesktop.org>, Dave Airlie <airlied@gmail.com>
> >
> >
> > On Mon, Jul 1, 2013 at 11:03 AM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> > > On Mon, Jul 1, 2013 at 10:52 AM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote:
> > >> On Mon, Jul 1, 2013 at 10:49 AM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> > >>> On Mon, Jul 1, 2013 at 9:59 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> > >>>> Hi all,
> > >>>>
> > >>>> Changes since 20130628:
> > >>>>
> > >>>> The regulator tree gained a build failure so I used the version from
> > >>>> next-20130628.
> > >>>>
> > >>>> The trivial tree gained a conflict against the fbdev tree.
> > >>>>
> > >>>> The arm-soc tree gained a conflict against the net-next tree.
> > >>>>
> > >>>> The akpm tree lost a few patches that turned up elsewhere and I removed 2
> > >>>> that were causing run time problems.
> > >>>>
> > >>>
> > >>> [ CC drm and drm-intel folks ]
> > >>>
> > >>> [ Did not check any relevant MLs ]
> > >>>
> > >>> Please, see attached dmesg output.
> > >>
> > >> Clock mismatch, one for Jesse to figure out. Note that this patch is
> > >> for 3.12, I simply haven't yet gotten around to properly split my
> > >> patch queue so a few spilled into -next. I'll do that now.
> > >
> > > I like lightspeed-fast replies :-).
> > >
> > > Guess "drm/i915: get mode clock when reading the pipe config v9" [1]
> > > is the cause.
> > >
> >
> > Problem solved by applying these patches to next-20130701 from
> > intel-gfx patchwork-service [0]:
> >
> > [1/2] drm/i915: fixup messages in pipe_config_compare
> > [2/2] drm/i915: get clock config when checking CRTC state too
> >
> > AFAICS 2/2 was folded into updated "drm/i915: get mode clock when
> > reading the pipe config v9" [3].
> >
> > It would be kind to be CCed on the patches and get also some credits.
> > Also a CC to the report in linux-next should IMHO be done.
> >
> > - Sedat -
> >
> > [0] https://patchwork.kernel.org/project/intel-gfx/list/
> > [1] https://patchwork.kernel.org/patch/2809031/
> > [2] https://patchwork.kernel.org/patch/2809021/
> > [3] http://cgit.freedesktop.org/~danvet/drm-intel/commit/?h=drm-intel-nightly&id=f1f644dc66cbaf5a4c7dcde683361536b41885b9
> >
> > > - Sedat -
> > >
> > > [1] http://cgit.freedesktop.org/~danvet/drm-intel/commit/?h=drm-intel-next-queued&id=d325d8b4f351f9d45e7c8baabf581fd21f343133
> > >
> > >> -Daniel
> > >> --
> > >> Daniel Vetter
> > >> Software Engineer, Intel Corporation
> > >> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Fwd: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ]
2013-09-22 14:14 ` Fwd: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ] Michael S. Tsirkin
@ 2013-09-25 3:17 ` Dave Airlie
2013-09-25 7:56 ` Daniel Vetter
0 siblings, 1 reply; 13+ messages in thread
From: Dave Airlie @ 2013-09-25 3:17 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: Sedat Dilek, Barnes, Jesse, Stephen Rothwell, linux-next,
Linux Kernel Mailing List, intel-gfx, DRI
On Mon, Sep 23, 2013 at 12:14 AM, Michael S. Tsirkin <mst@redhat.com> wrote:
> On Mon, Aug 26, 2013 at 04:05:11PM +0300, Michael S. Tsirkin wrote:
>> On Wed, Aug 21, 2013 at 11:22:58AM +0200, Sedat Dilek wrote:
>> > [ Re: [Intel-gfx] i915 producing warnings with kernel 3.11-rc5 ]
>> >
>> > Hi,
>> >
>> > saw your posting in [1]... can you try the patches below?
>> > Not sure if they apply.
>> > Did you try v3.11-rc6(+)... or drm-intel-nightly?
>> >
>> > Regards,
>> > - Sedat -
>> >
>> > [1] http://lists.freedesktop.org/archives/intel-gfx/2013-August/032154.html
>>
>> Same thing observed with v3.11-rc7.
>
> I still see this with 3.11.
> Following this message, my VGA monitor goes blank and
> shows an error suggesting a wrong resolution or frequency are set.
> Anyone?
Daniel, Jesse?
still ongoing I think.
Dave.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Fwd: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ]
2013-09-25 3:17 ` Dave Airlie
@ 2013-09-25 7:56 ` Daniel Vetter
2013-09-25 8:19 ` Michael S. Tsirkin
2013-09-25 15:34 ` Michael S. Tsirkin
0 siblings, 2 replies; 13+ messages in thread
From: Daniel Vetter @ 2013-09-25 7:56 UTC (permalink / raw)
To: Dave Airlie
Cc: Michael S. Tsirkin, Stephen Rothwell, intel-gfx,
Linux Kernel Mailing List, linux-next, DRI, Sedat Dilek
On Wed, Sep 25, 2013 at 01:17:52PM +1000, Dave Airlie wrote:
> On Mon, Sep 23, 2013 at 12:14 AM, Michael S. Tsirkin <mst@redhat.com> wrote:
> > On Mon, Aug 26, 2013 at 04:05:11PM +0300, Michael S. Tsirkin wrote:
> >> On Wed, Aug 21, 2013 at 11:22:58AM +0200, Sedat Dilek wrote:
> >> > [ Re: [Intel-gfx] i915 producing warnings with kernel 3.11-rc5 ]
> >> >
> >> > Hi,
> >> >
> >> > saw your posting in [1]... can you try the patches below?
> >> > Not sure if they apply.
> >> > Did you try v3.11-rc6(+)... or drm-intel-nightly?
> >> >
> >> > Regards,
> >> > - Sedat -
> >> >
> >> > [1] http://lists.freedesktop.org/archives/intel-gfx/2013-August/032154.html
> >>
> >> Same thing observed with v3.11-rc7.
> >
> > I still see this with 3.11.
> > Following this message, my VGA monitor goes blank and
> > shows an error suggesting a wrong resolution or frequency are set.
> > Anyone?
>
> Daniel, Jesse?
>
> still ongoing I think.
Yeah, I've dismissed it since the original issue in this thread is
resolved. But it's something else.
Note to bug reporters: Please don't me-too, but start a new thread/report
- almost every gfx bug is different, even if it superficially looks the
same.
Michael, can you please boot with drm.debug=0xe, reproduce the problem and
then attach the complete dmesg? Please make sure dmesg contains everything
since boot-up, if not please increase the dmesg buffer size with
log_buf_len=4M.
Also please test the latest drm-intel-fixes release to check that we
haven't just forgotten to send the patch to stable (there's at least one
flags mismatch fix already in-flight to 3.11 stable kernels).
Thanks, Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Fwd: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ]
2013-09-25 7:56 ` Daniel Vetter
@ 2013-09-25 8:19 ` Michael S. Tsirkin
2013-09-25 15:34 ` Michael S. Tsirkin
1 sibling, 0 replies; 13+ messages in thread
From: Michael S. Tsirkin @ 2013-09-25 8:19 UTC (permalink / raw)
To: Dave Airlie, Stephen Rothwell, intel-gfx,
Linux Kernel Mailing List, linux-next, DRI, Sedat Dilek
On Wed, Sep 25, 2013 at 09:56:52AM +0200, Daniel Vetter wrote:
> On Wed, Sep 25, 2013 at 01:17:52PM +1000, Dave Airlie wrote:
> > On Mon, Sep 23, 2013 at 12:14 AM, Michael S. Tsirkin <mst@redhat.com> wrote:
> > > On Mon, Aug 26, 2013 at 04:05:11PM +0300, Michael S. Tsirkin wrote:
> > >> On Wed, Aug 21, 2013 at 11:22:58AM +0200, Sedat Dilek wrote:
> > >> > [ Re: [Intel-gfx] i915 producing warnings with kernel 3.11-rc5 ]
> > >> >
> > >> > Hi,
> > >> >
> > >> > saw your posting in [1]... can you try the patches below?
> > >> > Not sure if they apply.
> > >> > Did you try v3.11-rc6(+)... or drm-intel-nightly?
> > >> >
> > >> > Regards,
> > >> > - Sedat -
> > >> >
> > >> > [1] http://lists.freedesktop.org/archives/intel-gfx/2013-August/032154.html
> > >>
> > >> Same thing observed with v3.11-rc7.
> > >
> > > I still see this with 3.11.
> > > Following this message, my VGA monitor goes blank and
> > > shows an error suggesting a wrong resolution or frequency are set.
> > > Anyone?
> >
> > Daniel, Jesse?
> >
> > still ongoing I think.
>
> Yeah, I've dismissed it since the original issue in this thread is
> resolved. But it's something else.
>
> Note to bug reporters: Please don't me-too, but start a new thread/report
> - almost every gfx bug is different, even if it superficially looks the
> same.
>
> Michael, can you please boot with drm.debug=0xe, reproduce the problem and
> then attach the complete dmesg? Please make sure dmesg contains everything
> since boot-up, if not please increase the dmesg buffer size with
> log_buf_len=4M.
>
> Also please test the latest drm-intel-fixes release to check that we
> haven't just forgotten to send the patch to stable (there's at least one
> flags mismatch fix already in-flight to 3.11 stable kernels).
>
> Thanks, Daniel
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Will do. Holidays starting now so expect some reports
next week.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Fwd: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ]
2013-09-25 7:56 ` Daniel Vetter
2013-09-25 8:19 ` Michael S. Tsirkin
@ 2013-09-25 15:34 ` Michael S. Tsirkin
2013-09-25 15:48 ` [Intel-gfx] " Daniel Vetter
1 sibling, 1 reply; 13+ messages in thread
From: Michael S. Tsirkin @ 2013-09-25 15:34 UTC (permalink / raw)
To: Dave Airlie, Stephen Rothwell, intel-gfx,
Linux Kernel Mailing List, linux-next, DRI, Sedat Dilek
[-- Attachment #1: Type: text/plain, Size: 1988 bytes --]
On Wed, Sep 25, 2013 at 09:56:52AM +0200, Daniel Vetter wrote:
> On Wed, Sep 25, 2013 at 01:17:52PM +1000, Dave Airlie wrote:
> > On Mon, Sep 23, 2013 at 12:14 AM, Michael S. Tsirkin <mst@redhat.com> wrote:
> > > On Mon, Aug 26, 2013 at 04:05:11PM +0300, Michael S. Tsirkin wrote:
> > >> On Wed, Aug 21, 2013 at 11:22:58AM +0200, Sedat Dilek wrote:
> > >> > [ Re: [Intel-gfx] i915 producing warnings with kernel 3.11-rc5 ]
> > >> >
> > >> > Hi,
> > >> >
> > >> > saw your posting in [1]... can you try the patches below?
> > >> > Not sure if they apply.
> > >> > Did you try v3.11-rc6(+)... or drm-intel-nightly?
> > >> >
> > >> > Regards,
> > >> > - Sedat -
> > >> >
> > >> > [1] http://lists.freedesktop.org/archives/intel-gfx/2013-August/032154.html
> > >>
> > >> Same thing observed with v3.11-rc7.
> > >
> > > I still see this with 3.11.
> > > Following this message, my VGA monitor goes blank and
> > > shows an error suggesting a wrong resolution or frequency are set.
> > > Anyone?
> >
> > Daniel, Jesse?
> >
> > still ongoing I think.
>
> Yeah, I've dismissed it since the original issue in this thread is
> resolved. But it's something else.
>
> Note to bug reporters: Please don't me-too, but start a new thread/report
> - almost every gfx bug is different, even if it superficially looks the
> same.
>
> Michael, can you please boot with drm.debug=0xe, reproduce the problem and
> then attach the complete dmesg? Please make sure dmesg contains everything
> since boot-up, if not please increase the dmesg buffer size with
> log_buf_len=4M.
Complete dmesg attached.
> Also please test the latest drm-intel-fixes release to check that we
> haven't just forgotten to send the patch to stable (there's at least one
> flags mismatch fix already in-flight to 3.11 stable kernels).
>
> Thanks, Daniel
Is it included in latest -rc2? It's easier for me to test that.
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
[-- Attachment #2: intel-crash-dmesg.txt --]
[-- Type: text/plain, Size: 156406 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.0-mst (mst@robin.redhat.com) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #258 SMP Sun Sep 22 02:49:15 IDT 2013
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.11.0-mst root=UUID=75d505b0-6e76-4f40-9cbc-0d6e700effd1 ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=True KEYTABLE=us rd.luks=0 LANG=en_US.UTF-8 rhgb quiet drm.debug=0xe
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da99efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da99f000-0x00000000dae9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000021e600000-0x000000021e7fffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: LENOVO 4243BQ9/4243BQ9, BIOS 8AET57WW (1.37 ) 04/05/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask FE0000000 write-back
[ 0.000000] 8 base 21F000000 mask FFF000000 uncachable
[ 0.000000] 9 base 21E800000 mask FFF800000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 28672
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fbf000, 0x01fbffff] PGTABLE
[ 0.000000] BRK [0x01fc0000, 0x01fc0fff] PGTABLE
[ 0.000000] BRK [0x01fc1000, 0x01fc1fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21e400000-0x21e5fffff]
[ 0.000000] [mem 0x21e400000-0x21e5fffff] page 2M
[ 0.000000] BRK [0x01fc2000, 0x01fc2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21e3fffff]
[ 0.000000] [mem 0x21c000000-0x21e3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0xda99efff]
[ 0.000000] [mem 0x40200000-0xda7fffff] page 2M
[ 0.000000] [mem 0xda800000-0xda99efff] page 4k
[ 0.000000] BRK [0x01fc3000, 0x01fc3fff] PGTABLE
[ 0.000000] BRK [0x01fc4000, 0x01fc4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x371aa000-0x378ccfff]
[ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000daffe120 000AC (v01 LENOVO TP-8A 00001370 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000dafe8000 000F4 (v04 LENOVO TP-8A 00001370 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000dafeb000 0E48B (v01 LENOVO TP-8A 00001370 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000daf2d000 00040
[ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 LENOVO TP-8A 00001370 PTEC 00000001)
[ 0.000000] ACPI: SSDT 00000000daffc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000daffb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000daffa000 00797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: HPET 00000000dafe7000 00038 (v01 LENOVO TP-8A 00001370 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000dafe6000 00098 (v01 LENOVO TP-8A 00001370 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000dafe5000 0003C (v01 LENOVO TP-8A 00001370 PTL 00000002)
[ 0.000000] ACPI: ECDT 00000000dafe4000 00052 (v01 LENOVO TP-8A 00001370 PTL 00000002)
[ 0.000000] ACPI: ASF! 00000000dafea000 000A5 (v32 LENOVO TP-8A 00001370 PTL 00000002)
[ 0.000000] ACPI: TCPA 00000000dafe3000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.000000] ACPI: SSDT 00000000dafe2000 00A69 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000dafe1000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: DMAR 00000000dafe0000 000E8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: UEFI 00000000dafdf000 0003E (v01 LENOVO TP-8A 00001370 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000dafde000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 00000000dafdd000 00292 (v01 LENOVO TP-8A 00001370 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21e5fffff]
[ 0.000000] NODE_DATA [mem 0x21e5e5000-0x21e5f8fff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880215c00000-ffff88021dbfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21e5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xda99efff]
[ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x21e5fffff]
[ 0.000000] On node 0 totalpages: 2067260
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 156 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13911 pages used for memmap
[ 0.000000] DMA32 zone: 890272 pages, LIFO batch:31
[ 0.000000] Normal zone: 18328 pages used for memmap
[ 0.000000] Normal zone: 1172992 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda99f000-0xdae9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffd20000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88021e200000 s81216 r8192 d21184 u262144
[ 0.000000] pcpu-alloc: s81216 r8192 d21184 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2034801
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.0-mst root=UUID=75d505b0-6e76-4f40-9cbc-0d6e700effd1 ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=True KEYTABLE=us rd.luks=0 LANG=en_US.UTF-8 rhgb quiet drm.debug=0xe
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8046708K/8269040K available (6501K kernel code, 933K rwdata, 2768K rodata, 1356K init, 1508K bss, 222332K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 2790.991 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5581.98 BogoMIPS (lpj=2790991)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000035] Security Framework initialized
[ 0.000043] SELinux: Initializing.
[ 0.000050] SELinux: Starting in permissive mode
[ 0.000508] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.001954] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002583] Mount-cache hash table entries: 256
[ 0.002741] Initializing cgroup subsys devices
[ 0.002743] Initializing cgroup subsys freezer
[ 0.002744] Initializing cgroup subsys net_cls
[ 0.002745] Initializing cgroup subsys blkio
[ 0.002746] Initializing cgroup subsys perf_event
[ 0.002764] Disabled fast string operations
[ 0.002765] CPU: Physical Processor ID: 0
[ 0.002766] CPU: Processor Core ID: 0
[ 0.002770] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002772] mce: CPU supports 7 MCE banks
[ 0.002782] CPU0: Thermal monitoring enabled (TM1)
[ 0.002790] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
[ 0.002854] Freeing SMP alternatives memory: 24K (ffffffff81e3e000 - ffffffff81e44000)
[ 0.002856] ACPI: Core revision 20130517
[ 0.008026] ACPI: All ACPI Tables successfully acquired
[ 0.008870] ftrace: allocating 23578 entries in 93 pages
[ 0.018224] dmar: Host address width 36
[ 0.018226] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.018231] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.018232] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.018236] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.018237] dmar: RMRR base: 0x000000dacd5000 end: 0x000000dacebfff
[ 0.018238] dmar: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ 0.018308] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.018309] HPET id 0 under DRHD base 0xfed91000
[ 0.018309] HPET id 0 under DRHD base 0xfed91000
[ 0.018310] HPET id 0 under DRHD base 0xfed91000
[ 0.018311] HPET id 0 under DRHD base 0xfed91000
[ 0.018312] HPET id 0 under DRHD base 0xfed91000
[ 0.018312] HPET id 0 under DRHD base 0xfed91000
[ 0.018313] HPET id 0 under DRHD base 0xfed91000
[ 0.018314] HPET id 0 under DRHD base 0xfed91000
[ 0.018510] Enabled IRQ remapping in x2apic mode
[ 0.018511] Enabling x2apic
[ 0.018511] Enabled x2apic
[ 0.018517] Switched APIC routing to cluster x2apic.
[ 0.018947] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028952] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (fam: 06, model: 2a, stepping: 07)
[ 0.028960] TSC deadline timer enabled
[ 0.028970] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.028975] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.028977] ... version: 3
[ 0.028978] ... bit width: 48
[ 0.028978] ... generic registers: 4
[ 0.028979] ... value mask: 0000ffffffffffff
[ 0.028980] ... max period: 0000ffffffffffff
[ 0.028981] ... fixed-purpose events: 3
[ 0.028981] ... event mask: 000000070000000f
[ 0.040977] Disabled fast string operations
[ 0.043168] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.054269] Disabled fast string operations
[ 0.067480] Disabled fast string operations
[ 0.029949] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.069600] Brought up 4 CPUs
[ 0.069603] smpboot: Total of 4 processors activated (22327.92 BogoMIPS)
[ 0.072607] devtmpfs: initialized
[ 0.072783] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
[ 0.073404] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.073430] RTC time: 18:30:05, date: 09/25/13
[ 0.073461] NET: Registered protocol family 16
[ 0.073580] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.073582] ACPI: bus type PCI registered
[ 0.073584] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.073784] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.073787] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.078706] PCI: Using configuration type 1 for base access
[ 0.079362] bio: create slab <bio-0> at 0
[ 0.079452] ACPI: Added _OSI(Module Device)
[ 0.079453] ACPI: Added _OSI(Processor Device)
[ 0.079454] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.079455] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.080728] ACPI: EC: EC description table is found, configuring boot EC
[ 0.084195] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.097963] ACPI: SSDT 00000000dae8c018 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.098288] ACPI: Dynamic OEM Table Load:
[ 0.098289] ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.100796] ACPI: SSDT 00000000dae8da98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.101142] ACPI: Dynamic OEM Table Load:
[ 0.101143] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.103701] ACPI: SSDT 00000000dae8bd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.104019] ACPI: Dynamic OEM Table Load:
[ 0.104020] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.107090] ACPI: Interpreter enabled
[ 0.107094] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 0.107098] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.107108] ACPI: (supports S0 S3 S4 S5)
[ 0.107109] ACPI: Using IOAPIC for interrupt routing
[ 0.107125] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.107803] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.113083] ACPI: Power Resource [PUBS] (on)
[ 0.116628] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.116695] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.116760] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.116824] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.116888] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.116938] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.117003] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.117066] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.117104] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.117194] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.117255] PCI host bridge to bus 0000:00
[ 0.117258] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.117259] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.117261] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.117262] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.117263] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff]
[ 0.117265] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
[ 0.117272] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.117334] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 0.117343] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.117348] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.117352] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.117430] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.117453] pci 0000:00:16.0: reg 0x10: [mem 0xf2525000-0xf252500f 64bit]
[ 0.117528] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.117586] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
[ 0.117607] pci 0000:00:16.3: reg 0x10: [io 0x50b0-0x50b7]
[ 0.117617] pci 0000:00:16.3: reg 0x14: [mem 0xf252c000-0xf252cfff]
[ 0.117741] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.117758] pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
[ 0.117766] pci 0000:00:19.0: reg 0x14: [mem 0xf252b000-0xf252bfff]
[ 0.117775] pci 0000:00:19.0: reg 0x18: [io 0x5080-0x509f]
[ 0.117836] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.117864] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.117896] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.117916] pci 0000:00:1a.0: reg 0x10: [mem 0xf252a000-0xf252a3ff]
[ 0.118003] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.118032] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.118065] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.118080] pci 0000:00:1b.0: reg 0x10: [mem 0xf2520000-0xf2523fff 64bit]
[ 0.118147] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.118179] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.118207] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.118283] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.118340] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.118416] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.118471] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.118547] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.118580] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.118615] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.118743] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.118814] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.118834] pci 0000:00:1d.0: reg 0x10: [mem 0xf2529000-0xf25293ff]
[ 0.118922] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.118952] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.118980] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[ 0.119128] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.119145] pci 0000:00:1f.2: reg 0x10: [io 0x50a8-0x50af]
[ 0.119153] pci 0000:00:1f.2: reg 0x14: [io 0x50bc-0x50bf]
[ 0.119160] pci 0000:00:1f.2: reg 0x18: [io 0x50a0-0x50a7]
[ 0.119168] pci 0000:00:1f.2: reg 0x1c: [io 0x50b8-0x50bb]
[ 0.119176] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
[ 0.119183] pci 0000:00:1f.2: reg 0x24: [mem 0xf2528000-0xf25287ff]
[ 0.119227] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.119274] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.119288] pci 0000:00:1f.3: reg 0x10: [mem 0xf2524000-0xf25240ff 64bit]
[ 0.119309] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.119414] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.119510] pci 0000:03:00.0: [8086:4238] type 00 class 0x028000
[ 0.119554] pci 0000:03:00.0: reg 0x10: [mem 0xf2400000-0xf2401fff 64bit]
[ 0.119774] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.121652] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.121667] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.121800] acpiphp: Slot [1] registered
[ 0.121807] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.121811] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.121815] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff]
[ 0.121821] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.121973] pci 0000:0d:00.0: [1180:e823] type 00 class 0x088001
[ 0.121991] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.122017] pci 0000:0d:00.0: reg 0x10: [mem 0xf1401000-0xf14010ff]
[ 0.122210] pci 0000:0d:00.0: supports D1 D2
[ 0.122211] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.122334] pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010
[ 0.122359] pci 0000:0d:00.3: reg 0x10: [mem 0xf1400000-0xf14007ff]
[ 0.122551] pci 0000:0d:00.3: supports D1 D2
[ 0.122553] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.124735] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.124745] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.124754] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff]
[ 0.124769] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.124883] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.125007] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.125009] acpi PNP0A08:00: ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.125830] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.125840] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.125875] Found 1 acpi root devices
[ 0.125923] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.125975] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.125978] vgaarb: loaded
[ 0.125979] vgaarb: bridge control possible 0000:00:02.0
[ 0.126029] SCSI subsystem initialized
[ 0.126031] ACPI: bus type ATA registered
[ 0.126069] libata version 3.00 loaded.
[ 0.126085] ACPI: bus type USB registered
[ 0.126098] usbcore: registered new interface driver usbfs
[ 0.126104] usbcore: registered new interface driver hub
[ 0.126121] usbcore: registered new device driver usb
[ 0.126170] PCI: Using ACPI for IRQ routing
[ 0.127668] PCI: pci_cache_line_size set to 64 bytes
[ 0.127802] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.127804] e820: reserve RAM buffer [mem 0xda99f000-0xdbffffff]
[ 0.127805] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.127806] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
[ 0.127869] NetLabel: Initializing
[ 0.127870] NetLabel: domain hash size = 128
[ 0.127871] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.127880] NetLabel: unlabeled traffic allowed by default
[ 0.127922] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.127926] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.129951] Switched to clocksource hpet
[ 0.133716] pnp: PnP ACPI init
[ 0.133729] ACPI: bus type PNP registered
[ 0.134057] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.134060] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.134061] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.134063] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.134064] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.134066] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.134067] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.134068] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.134070] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.134071] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.134073] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.134074] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.134076] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.134077] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.134079] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[ 0.134080] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.134082] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.134085] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.134165] system 00:01: [io 0x0400-0x047f] could not be reserved
[ 0.134167] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.134168] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.134170] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.134171] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.134173] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.134176] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.134177] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.134179] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.134180] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.134182] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.134183] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.134185] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134228] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.134235] pnp 00:03: [dma 4]
[ 0.134250] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.134269] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.134297] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.134319] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.134339] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.134362] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.134398] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.134813] pnp: PnP ACPI: found 10 devices
[ 0.134814] ACPI: bus type PNP unregistered
[ 0.140891] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.140903] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.140908] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.140916] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.140919] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.140924] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff]
[ 0.140928] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.140934] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.140937] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.140944] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff]
[ 0.140949] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.141122] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.141123] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.141125] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.141126] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
[ 0.141127] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
[ 0.141129] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff]
[ 0.141130] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.141132] pci_bus 0000:05: resource 1 [mem 0xf1c00000-0xf23fffff]
[ 0.141133] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.141134] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
[ 0.141136] pci_bus 0000:0d: resource 1 [mem 0xf1400000-0xf1bfffff]
[ 0.141137] pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.141160] NET: Registered protocol family 2
[ 0.141320] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.141495] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.141607] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.141629] TCP: reno registered
[ 0.141639] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.141666] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.141730] NET: Registered protocol family 1
[ 0.141740] pci 0000:00:02.0: Boot video device
[ 0.142014] PCI: CLS 64 bytes, default 64
[ 0.142047] Unpacking initramfs...
[ 0.252103] Freeing initrd memory: 7308K (ffff8800371aa000 - ffff8800378cd000)
[ 0.252112] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.252114] software IO TLB [mem 0xd699f000-0xda99f000] (64MB) mapped at [ffff8800d699f000-ffff8800da99efff]
[ 0.254142] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 0.254462] audit: initializing netlink socket (disabled)
[ 0.254473] type=2000 audit(1380133805.244:1): initialized
[ 0.271432] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.272496] VFS: Disk quotas dquot_6.5.2
[ 0.272523] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.272802] msgmni has been set to 15730
[ 0.272844] SELinux: Registering netfilter hooks
[ 0.273161] alg: No test for stdrng (krng)
[ 0.273168] NET: Registered protocol family 38
[ 0.273193] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.273220] io scheduler noop registered
[ 0.273222] io scheduler deadline registered
[ 0.273240] io scheduler cfq registered (default)
[ 0.273485] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.273495] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.273529] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.273530] vesafb: scrolling: redraw
[ 0.273531] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.273952] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f00000, using 5120k, total 5120k
[ 0.352872] Console: switching to colour frame buffer device 160x64
[ 0.427168] fb0: VESA VGA frame buffer device
[ 0.427176] intel_idle: MWAIT substates: 0x21120
[ 0.427177] intel_idle: v0.4 model 0x2A
[ 0.427178] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.427996] ACPI: AC Adapter [AC] (on-line)
[ 0.428122] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.428386] ACPI: Lid Switch [LID]
[ 0.428426] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.428429] ACPI: Sleep Button [SLPB]
[ 0.428516] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.428518] ACPI: Power Button [PWRF]
[ 0.428592] ACPI: Requesting acpi_cpufreq
[ 0.430181] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.430182] ACPI: Thermal Zone [THM0] (60 C)
[ 0.430199] GHES: HEST is not enabled!
[ 0.430259] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.451149] 0000:00:16.3: ttyS0 at I/O 0x50b0 (irq = 19) is a 16550A
[ 0.451452] Non-volatile memory driver v1.3
[ 0.451453] Linux agpgart interface v0.103
[ 0.452161] loop: module loaded
[ 0.452199] ahci 0000:00:1f.2: version 3.0
[ 0.452266] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 0.452294] ahci: SSS flag set, parallel bus scan disabled
[ 0.463069] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[ 0.463072] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.463076] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.463704] ACPI: Battery Slot [BAT0] (battery present)
[ 0.469332] scsi0 : ahci
[ 0.469391] scsi1 : ahci
[ 0.469439] scsi2 : ahci
[ 0.469487] scsi3 : ahci
[ 0.469533] scsi4 : ahci
[ 0.469583] scsi5 : ahci
[ 0.469643] ata1: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528100 irq 42
[ 0.469646] ata2: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528180 irq 42
[ 0.469647] ata3: DUMMY
[ 0.469649] ata4: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528280 irq 42
[ 0.469651] ata5: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528300 irq 42
[ 0.469652] ata6: DUMMY
[ 0.469706] libphy: Fixed MDIO Bus: probed
[ 0.469755] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.469757] ehci-pci: EHCI PCI platform driver
[ 0.469830] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.469838] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.469877] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.469890] ehci-pci 0000:00:1a.0: debug port 2
[ 0.473802] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.473816] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf252a000
[ 0.479055] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.479070] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.479071] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.479073] usb usb1: Product: EHCI Host Controller
[ 0.479074] usb usb1: Manufacturer: Linux 3.11.0-mst ehci_hcd
[ 0.479075] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.479156] hub 1-0:1.0: USB hub found
[ 0.479159] hub 1-0:1.0: 3 ports detected
[ 0.479280] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.479285] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.479326] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.479337] ehci-pci 0000:00:1d.0: debug port 2
[ 0.483236] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.483247] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2529000
[ 0.489059] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.489068] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.489069] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.489071] usb usb2: Product: EHCI Host Controller
[ 0.489072] usb usb2: Manufacturer: Linux 3.11.0-mst ehci_hcd
[ 0.489073] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.489144] hub 2-0:1.0: USB hub found
[ 0.489147] hub 2-0:1.0: 3 ports detected
[ 0.489215] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.489217] ohci-pci: OHCI PCI platform driver
[ 0.489223] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.489258] usbcore: registered new interface driver usbserial
[ 0.489263] usbcore: registered new interface driver usbserial_generic
[ 0.489267] usbserial: USB Serial support registered for generic
[ 0.489298] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.494993] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.494997] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.495074] mousedev: PS/2 mouse device common for all mice
[ 0.495221] rtc_cmos 00:06: RTC can wake from S4
[ 0.495337] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.495364] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.495404] device-mapper: uevent: version 1.0.3
[ 0.495450] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 0.495529] cpuidle: using governor ladder
[ 0.495608] cpuidle: using governor menu
[ 0.495884] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.495941] usbcore: registered new interface driver usbhid
[ 0.495942] usbhid: USB HID core driver
[ 0.495957] drop_monitor: Initializing network drop monitor service
[ 0.496026] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.496036] TCP: cubic registered
[ 0.496037] Initializing XFRM netlink socket
[ 0.496118] NET: Registered protocol family 10
[ 0.496256] mip6: Mobile IPv6
[ 0.496257] NET: Registered protocol family 17
[ 0.496264] Key type dns_resolver registered
[ 0.496471] PM: Hibernation image not present or could not be loaded.
[ 0.496488] registered taskstats version 1
[ 0.497176] Magic number: 13:285:545
[ 0.497256] rtc_cmos 00:06: setting system clock to 2013-09-25 18:30:05 UTC (1380133805)
[ 0.504215] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.774286] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.775325] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 0.775336] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.775342] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 0.775660] ata1.00: ATA-9: Samsung SSD 840 Series, DXT08B0Q, max UDMA/133
[ 0.775669] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.780451] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 0.780463] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.780470] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 0.780797] ata1.00: configured for UDMA/133
[ 0.781206] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXT0 PQ: 0 ANSI: 5
[ 0.781239] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.781623] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.781690] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.781920] sd 0:0:0:0: [sda] Write Protect is off
[ 0.781929] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.782027] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.785081] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 0.786360] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.895901] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 0.895912] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.896504] hub 1-1:1.0: USB hub found
[ 0.896660] hub 1-1:1.0: 6 ports detected
[ 1.000321] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.086373] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.089468] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.089902] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.089913] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.091651] ata2.00: ATAPI: Optiarc DVD RW AD-7740H, 1.S0, max UDMA/100
[ 1.095010] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.095446] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.095457] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.097249] ata2.00: configured for UDMA/100
[ 1.098490] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7740H 1.S0 PQ: 0 ANSI: 5
[ 1.100834] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.100843] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.101241] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.101447] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.114951] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.114962] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.115560] hub 2-1:1.0: USB hub found
[ 1.115724] hub 2-1:1.0: 8 ports detected
[ 1.190639] usb 1-1.6: new high-speed USB device number 3 using ehci-pci
[ 1.254378] tsc: Refined TSC clocksource calibration: 2790.932 MHz
[ 1.282153] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
[ 1.282164] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.282169] usb 1-1.6: Product: Integrated Camera
[ 1.282174] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.391553] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.406447] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.477394] usb 2-1.1: New USB device found, idVendor=0557, idProduct=7000
[ 1.477406] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.478061] hub 2-1.1:1.0: USB hub found
[ 1.478357] hub 2-1.1:1.0: 4 ports detected
[ 1.639617] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 920262
[ 1.639635] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 1.707448] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
[ 1.711532] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.714633] Freeing unused kernel memory: 1356K (ffffffff81ceb000 - ffffffff81e3e000)
[ 1.714640] Write protecting the kernel read-only data: 12288k
[ 1.724711] Freeing unused kernel memory: 1680K (ffff88000165c000 - ffff880001800000)
[ 1.732923] Freeing unused kernel memory: 1328K (ffff880001ab4000 - ffff880001c00000)
[ 1.738644] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
[ 1.741287] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 1.741585] systemd[1]: Running in initial RAM disk.
[ 1.741899] systemd[1]: Set hostname to <robin.redhat.com>.
[ 1.742667] usb 2-1.1.1: new low-speed USB device number 4 using ehci-pci
[ 1.757235] systemd[1]: Expecting device dev-disk-by\x2duuid-75d505b0\x2d6e76\x2d4f40\x2d9cbc\x2d0d6e700effd1.device...
[ 1.757278] systemd[1]: Expecting device dev-disk-by\x2duuid-9a6a5ef2\x2dbee4\x2d4df3\x2dbd74\x2dc9cf2e3628ff.device...
[ 1.757308] systemd[1]: Starting Timers.
[ 1.757340] systemd[1]: Reached target Timers.
[ 1.757539] systemd[1]: Starting udev Kernel Socket.
[ 1.757624] systemd[1]: Listening on udev Kernel Socket.
[ 1.757760] systemd[1]: Starting udev Control Socket.
[ 1.757846] systemd[1]: Listening on udev Control Socket.
[ 1.757876] systemd[1]: Starting Journal Socket.
[ 1.757996] systemd[1]: Listening on Journal Socket.
[ 1.758467] systemd[1]: Started dracut cmdline hook.
[ 1.758919] systemd[1]: Starting dracut pre-udev hook...
[ 1.760632] systemd[1]: Started Load Kernel Modules.
[ 1.760699] systemd[1]: Starting Sockets.
[ 1.760751] systemd[1]: Reached target Sockets.
[ 1.760800] systemd[1]: Starting Journal Service...
[ 1.762053] systemd[1]: Started Journal Service.
[ 1.762575] systemd[1]: Starting Setup Virtual Console...
[ 1.762895] systemd[1]: Starting Swap.
[ 1.762910] systemd[1]: Reached target Swap.
[ 1.762923] systemd[1]: Starting Local File Systems.
[ 1.762936] systemd[1]: Reached target Local File Systems.
[ 1.792945] systemd-udevd[114]: starting version 204
[ 1.825377] [drm] Initialized drm 1.1.0 20060810
[ 1.827711] [drm:i915_dump_device_info], i915 device info: gen=6, pciid=0x0126 flags=is_mobile,need_gfx_hws,has_force_wake,has_fbc,has_hotplug,has_bsd_ring,has_blt_ring,has_llc,
[ 1.827711] [drm] Memory usable by graphics device = 2048M
[ 1.827712] [drm:i915_gem_gtt_init], GMADR size = 256M
[ 1.827712] [drm:i915_gem_gtt_init], GTT stolen size = 64M
[ 1.827713] checking generic (e0000000 500000) vs hw (e0000000 10000000)
[ 1.827714] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 1.841963] Console: switching to colour dummy device 80x25
[ 1.842081] i915 0000:00:02.0: setting latency timer to 64
[ 1.858493] usb 2-1.1.1: New USB device found, idVendor=045e, idProduct=00db
[ 1.858504] usb 2-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.858511] usb 2-1.1.1: Product: Natural® Ergonomic Keyboard 4000
[ 1.858516] usb 2-1.1.1: Manufacturer: Microsoft
[ 1.870126] [drm:intel_detect_pch], Found CougarPoint PCH
[ 1.870194] [drm:intel_opregion_setup], graphic opregion physical addr: 0xdaef6018
[ 1.870200] [drm:intel_opregion_setup], Public ACPI methods supported
[ 1.870201] [drm:intel_opregion_setup], SWSCI supported
[ 1.870202] [drm:intel_opregion_setup], ASLE supported
[ 1.870227] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 1.870233] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.870234] [drm] Driver supports precise vblank timestamp query.
[ 1.870235] [drm:init_vbt_defaults], Set default to SSC at 100MHz
[ 1.870236] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-M d
[ 1.870238] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 1.870239] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 1.870242] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 1.870243] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 0 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x8 0xa
[ 1.870245] [drm:parse_lfp_panel_data], VBT initial LVDS value 30033c
[ 1.870247] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 1.870248] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 1.870249] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[ 1.870255] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 1.870258] [drm:i915_gem_init_stolen], found 67108864 bytes of stolen memory at dba00000
[ 1.870282] [drm:intel_modeset_init], 2 display pipes available.
[ 1.870290] [drm:intel_shared_dpll_init], 2 shared PLLs initialized
[ 1.870292] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.873247] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/input/input5
[ 1.873454] microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1.1.1/input0
[ 1.883527] firewire_ohci 0000:0d:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 1.884866] [drm:intel_lvds_init], using preferred mode from EDID:
[ 1.884870] [drm:drm_mode_debug_printmodeline],
[ 1.884875] Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
[ 1.884878] [drm:intel_lvds_init], detected dual-link lvds configuration
[ 1.884925] [drm:intel_panel_get_backlight], get backlight PWM = 4437
[ 1.884928] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[ 1.884979] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 1.892458] [drm:intel_sdvo_read_byte], i2c transfer returned -6
[ 1.892462] [drm:intel_sdvo_init], No SDVO device found on SDVOB
[ 1.892515] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0
[ 1.892555] [drm:intel_dp_init_connector], Adding DP connector on port B
[ 1.892582] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
[ 1.892654] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.1/input/input6
[ 1.892755] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1.1.1/input1
[ 1.895042] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f
[ 1.895049] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.897475] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f
[ 1.897482] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.897552] [drm:intel_dp_init_connector], Adding DP connector on port C
[ 1.897573] [drm:intel_dp_i2c_init], i2c_init DPDDC-C
[ 1.900000] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f
[ 1.900007] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.902448] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f
[ 1.902454] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.902477] [drm:intel_dp_init_connector], Adding DP connector on port D
[ 1.902499] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
[ 1.904932] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f
[ 1.904939] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.907380] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f
[ 1.907386] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.907407] [drm:ironlake_init_pch_refclk], has_panel 1 has_lvds 1 has_ck505 0
[ 1.907411] [drm:ironlake_init_pch_refclk], Using SSC on panel
[ 1.907819] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000]
[ 1.909741] [drm:init_status_page], render ring hws offset: 0x00000000
[ 1.911505] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
[ 1.911576] [drm:init_status_page], bsd ring hws offset: 0x00022000
[ 1.911918] [drm:init_status_page], blitter ring hws offset: 0x00043000
[ 1.912242] [drm:create_default_context], Default HW context loaded
[ 1.912243] [drm:i915_gem_context_init], HW context support initialized
[ 1.912268] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 1.912269] [drm] This can cause pipe underruns and display issues.
[ 1.912270] [drm] Please upgrade your BIOS to fix this.
[ 1.912279] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
[ 1.912280] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
[ 1.912284] [drm:intel_modeset_readout_hw_state], PCH DPLL A hw state readout: refcount 1, on 1
[ 1.912288] [drm:intel_modeset_readout_hw_state], PCH DPLL B hw state readout: refcount 0, on 0
[ 1.912292] [drm:intel_modeset_readout_hw_state], [ENCODER:8:LVDS-8] hw state readout: enabled, pipe=0
[ 1.912295] [drm:intel_modeset_readout_hw_state], [ENCODER:15:DAC-15] hw state readout: disabled, pipe=0
[ 1.912298] [drm:intel_modeset_readout_hw_state], [ENCODER:16:TMDS-16] hw state readout: disabled, pipe=0
[ 1.912299] [drm:intel_modeset_readout_hw_state], [ENCODER:20:TMDS-20] hw state readout: disabled, pipe=0
[ 1.912302] [drm:intel_modeset_readout_hw_state], [ENCODER:22:TMDS-22] hw state readout: disabled, pipe=0
[ 1.912304] [drm:intel_modeset_readout_hw_state], [ENCODER:24:TMDS-24] hw state readout: disabled, pipe=0
[ 1.912307] [drm:intel_modeset_readout_hw_state], [ENCODER:26:TMDS-26] hw state readout: disabled, pipe=0
[ 1.912309] [drm:intel_modeset_readout_hw_state], [ENCODER:28:TMDS-28] hw state readout: disabled, pipe=0
[ 1.912312] [drm:intel_modeset_readout_hw_state], [CONNECTOR:7:LVDS-1] hw state readout: enabled
[ 1.912314] [drm:intel_modeset_readout_hw_state], [CONNECTOR:14:VGA-1] hw state readout: disabled
[ 1.912317] [drm:intel_modeset_readout_hw_state], [CONNECTOR:17:HDMI-A-1] hw state readout: disabled
[ 1.912319] [drm:intel_modeset_readout_hw_state], [CONNECTOR:21:DP-1] hw state readout: disabled
[ 1.912322] [drm:intel_modeset_readout_hw_state], [CONNECTOR:23:HDMI-A-2] hw state readout: disabled
[ 1.912324] [drm:intel_modeset_readout_hw_state], [CONNECTOR:25:HDMI-A-3] hw state readout: disabled
[ 1.912326] [drm:intel_modeset_readout_hw_state], [CONNECTOR:27:DP-2] hw state readout: disabled
[ 1.912329] [drm:intel_modeset_readout_hw_state], [CONNECTOR:29:DP-3] hw state readout: disabled
[ 1.912330] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[ 1.912331] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 1.912332] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 1.912333] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 4, gmch_m: 2429201, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
[ 1.912334] [drm:intel_dump_pipe_config], requested mode:
[ 1.912335] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1280 0 0 0 1024 0 0 0 0x0 0x0
[ 1.912337] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.912338] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 1.912339] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.912340] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x07800438
[ 1.912341] [drm:intel_dump_pipe_config], ips: 0
[ 1.912342] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
[ 1.912342] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 1.912343] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 1.912344] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.912345] [drm:intel_dump_pipe_config], requested mode:
[ 1.912346] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.912347] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.912348] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.912349] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.912350] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
[ 1.912350] [drm:intel_dump_pipe_config], ips: 0
[ 1.912353] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1]
[ 1.912360] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
[ 1.912363] [drm:check_encoder_state], [ENCODER:15:DAC-15]
[ 1.912365] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[ 1.912367] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
[ 1.912369] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
[ 1.912370] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
[ 1.912372] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
[ 1.912374] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
[ 1.912376] [drm:check_crtc_state], [CRTC:3]
[ 1.912386] [drm:check_crtc_state], [CRTC:5]
[ 1.912387] [drm:check_shared_dpll_state], PCH DPLL A
[ 1.912391] [drm:check_shared_dpll_state], PCH DPLL B
[ 1.912396] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
[ 1.912404] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[ 1.912413] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[ 1.912414] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
[ 1.912415] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
[ 1.912417] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[ 1.912420] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
[ 1.921476] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 1.921489] [drm:intel_crt_detect], CRT not detected via hotplug
[ 1.921674] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 1.921683] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 1.921687] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 1.921691] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 1.922105] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 1.922106] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 1.922107] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 1.922109] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[ 1.922111] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[ 1.965897] usb 2-1.1.4: new low-speed USB device number 5 using ehci-pci
[ 1.972467] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ 1.980498] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 1.980504] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[ 1.980509] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 1.980514] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 1.980518] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[ 1.980716] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 1.980724] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 1.980729] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[ 1.980734] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[ 1.980901] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 1.980906] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 1.980911] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[ 1.980915] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 1.980922] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 1.980926] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[ 1.980931] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
[ 1.980935] [drm:drm_setup_crtcs],
[ 1.980939] [drm:drm_enable_connectors], connector 7 enabled? yes
[ 1.980943] [drm:drm_enable_connectors], connector 14 enabled? no
[ 1.980947] [drm:drm_enable_connectors], connector 17 enabled? no
[ 1.980950] [drm:drm_enable_connectors], connector 21 enabled? no
[ 1.980953] [drm:drm_enable_connectors], connector 23 enabled? no
[ 1.980956] [drm:drm_enable_connectors], connector 25 enabled? no
[ 1.980960] [drm:drm_enable_connectors], connector 27 enabled? no
[ 1.980963] [drm:drm_enable_connectors], connector 29 enabled? no
[ 1.980966] [drm:drm_target_preferred], looking for cmdline mode on connector 7
[ 1.980970] [drm:drm_target_preferred], looking for preferred mode on connector 7
[ 1.980974] [drm:drm_target_preferred], found mode 1920x1080
[ 1.980978] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 1.980984] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
[ 1.980994] [drm:i915_gem_object_create_stolen], creating stolen object: size=7e9000
[ 1.981002] [drm:i915_pages_create_for_stolen], offset=0x0, size=8294400
[ 1.982540] [drm:intelfb_create], allocated 1920x1080 fb: 0x00072000, bo ffff880211d10c00
[ 1.982691] fbcon: inteldrmfb (fb0) is primary device
[ 1.982725] [drm:intel_crtc_set_config], [CRTC:3] [FB:31] #connectors=1 (x y) (0 0)
[ 1.982726] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
[ 1.982727] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 1.982729] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.982731] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
[ 1.982732] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[ 1.982734] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 1.982735] [drm:connected_sink_compute_bpp], [CONNECTOR:7:LVDS-1] checking for sink bpp constrains
[ 1.982738] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
[ 1.982740] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe A, lanes 2
[ 1.982741] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[ 1.982743] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 1.982743] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 1.982744] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 1.982745] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
[ 1.982746] [drm:intel_dump_pipe_config], requested mode:
[ 1.982748] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
[ 1.982749] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.982750] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
[ 1.982751] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.982752] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
[ 1.982753] [drm:intel_dump_pipe_config], ips: 0
[ 1.982755] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 2.047855] usb 2-1.1.4: New USB device found, idVendor=05bc, idProduct=0102
[ 2.047860] usb 2-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.047863] usb 2-1.1.4: Product: USB Optical Mouse
[ 2.047866] usb 2-1.1.4: Manufacturer: Forward
[ 2.051524] input: Forward USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.4/2-1.1.4:1.0/input/input7
[ 2.051896] hid-generic 0003:05BC:0102.0003: input,hidraw2: USB HID v1.10 Mouse [Forward USB Optical Mouse] on usb-0000:00:1d.0-1.1.4/input0
[ 2.254882] Switched to clocksource tsc
[ 2.351629] [drm:intel_disable_shared_dpll], disable PCH DPLL A (active 1, on? 1) for crtc 3
[ 2.351637] [drm:intel_disable_shared_dpll], disabling PCH DPLL A
[ 2.352054] [drm:intel_update_fbc], no output, disabling
[ 2.352069] [drm:ironlake_get_refclk], using SSC reference clock of 120 MHz
[ 2.352123] [drm:intel_get_shared_dpll], CRTC:3 dropping existing PCH DPLL A
[ 2.352126] [drm:intel_get_shared_dpll], CRTC:3 allocated PCH DPLL A
[ 2.352129] [drm:intel_get_shared_dpll], using PCH DPLL A for pipe A
[ 2.352130] [drm:intel_get_shared_dpll], setting up PCH DPLL A
[ 2.352460] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 7680
[ 2.352463] [drm:intel_update_fbc], no output, disabling
[ 2.352470] [drm:intel_crtc_mode_set], [ENCODER:8:LVDS-8] set [MODE:0:1920x1080]
[ 2.352476] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
[ 2.352482] [drm:ironlake_check_srwm], watermark 1: display plane 16, fbc lines 3, cursor 6
[ 2.352486] [drm:ironlake_check_srwm], watermark 2: display plane 20, fbc lines 3, cursor 6
[ 2.352490] [drm:ironlake_check_srwm], watermark 3: display plane 98, fbc lines 3, cursor 6
[ 2.384981] firewire_core 0000:0d:00.3: created device fw0: GUID f0def1ffea9a6bff, S400
[ 2.404696] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 2.456613] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 2.457436] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x700
[ 2.457440] [drm:gen6_fdi_link_train], FDI train 1 done.
[ 2.458099] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[ 2.458102] [drm:gen6_fdi_link_train], FDI train 2 done.
[ 2.458104] [drm:gen6_fdi_link_train], FDI train done.
[ 2.458108] [drm:ironlake_enable_shared_dpll], enable PCH DPLL A (active 0, on? 0)for crtc 3
[ 2.458111] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL A
[ 2.459346] [drm:intel_update_fbc], fbc set to per-chip default
[ 2.459348] [drm:intel_update_fbc], fbc disabled per module param
[ 2.856787] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4437
[ 2.862840] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1]
[ 2.862861] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
[ 2.862867] [drm:check_encoder_state], [ENCODER:15:DAC-15]
[ 2.862872] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[ 2.862876] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
[ 2.862880] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
[ 2.862884] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
[ 2.862888] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
[ 2.862892] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
[ 2.862897] [drm:check_crtc_state], [CRTC:3]
[ 2.862917] [drm:check_crtc_state], [CRTC:5]
[ 2.862920] [drm:check_shared_dpll_state], PCH DPLL A
[ 2.862926] [drm:check_shared_dpll_state], PCH DPLL B
[ 2.862937] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
[ 2.862945] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[ 2.862957] Console: switching to colour frame buffer device 240x67
[ 2.862979] [drm:intel_crtc_set_config], [CRTC:3] [FB:31] #connectors=1 (x y) (0 0)
[ 2.862984] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[ 2.875013] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.875017] i915 0000:00:02.0: registered panic notifier
[ 2.888552] [drm:asle_set_backlight], bclp = 0x80000005
[ 2.888567] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[ 2.888572] [drm:intel_panel_actually_set_backlight], set backlight PWM = 85
[ 2.888577] [drm:asle_set_pwm_freq], PWM freq is not supported
[ 2.889176] [drm:asle_set_backlight], bclp = 0x800000ff
[ 2.889188] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[ 2.889194] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
[ 2.889198] [drm:asle_set_pwm_freq], PWM freq is not supported
[ 2.889524] acpi device:01: registered as cooling_device4
[ 2.889872] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 2.889918] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 2.890210] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.892375] [drm:i915_driver_open],
[ 2.892388] [drm:intel_crtc_cursor_set], cursor off
[ 2.892390] [drm:intel_crtc_set_config], [CRTC:3] [FB:31] #connectors=1 (x y) (0 0)
[ 2.892393] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[ 2.892396] [drm:intel_crtc_cursor_set], cursor off
[ 2.892396] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
[ 2.892398] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[ 2.892404] [drm:i915_driver_open],
[ 2.892408] [drm:intel_crtc_cursor_set], cursor off
[ 2.892409] [drm:intel_crtc_set_config], [CRTC:3] [FB:31] #connectors=1 (x y) (0 0)
[ 2.892410] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[ 2.892411] [drm:intel_crtc_cursor_set], cursor off
[ 2.892412] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
[ 2.892413] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[ 2.892417] [drm:i915_driver_open],
[ 2.892452] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
[ 2.892454] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
[ 2.892458] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[ 2.892460] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[ 2.892468] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[ 2.892469] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
[ 2.892472] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
[ 2.892474] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[ 2.905530] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 2.905535] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[ 2.905539] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 2.905541] [drm:intel_crt_detect], CRT not detected via hotplug
[ 2.905746] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 2.905760] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 2.905766] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 2.905838] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 2.906244] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 2.906245] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 2.906246] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 2.906248] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[ 2.906254] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 2.906255] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[ 2.906257] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 2.906258] [drm:intel_crt_detect], CRT not detected via hotplug
[ 2.906424] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 2.906429] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 2.906433] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 2.906436] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 2.906808] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 2.906810] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 2.906811] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 2.906813] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[ 2.906818] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[ 2.906820] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[ 2.914713] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 2.914715] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[ 2.914723] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[ 2.914724] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[ 2.922725] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 2.922727] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[ 2.922734] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 2.922735] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 2.922738] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 2.922739] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 2.922740] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 2.922743] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 2.922744] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[ 2.922745] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[ 2.922901] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 2.922903] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 2.922904] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[ 2.922905] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[ 2.922906] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[ 2.923060] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 2.923061] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 2.923062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[ 2.923064] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 2.923065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[ 2.923215] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 2.923216] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 2.923217] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[ 2.923218] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 2.923219] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[ 2.923368] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 2.923369] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 2.923370] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[ 2.923372] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 2.923374] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 2.923376] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 2.923377] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 2.923378] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 2.923381] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 2.923382] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[ 2.923383] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[ 2.923385] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
[ 2.923387] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[ 2.923387] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[ 2.923390] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
[ 2.923401] [drm:drm_mode_addfb], [FB:32]
[ 2.952510] [drm:drm_mode_addfb], [FB:32]
[ 2.952528] [drm:drm_mode_setcrtc], [CRTC:3]
[ 2.952532] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
[ 2.952533] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
[ 2.952538] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[ 2.956869] [drm:ironlake_update_plane], Writing base 0085B000 00000000 0 0 7680
[ 2.962715] [drm:intel_update_fbc], fbc set to per-chip default
[ 2.962718] [drm:intel_update_fbc], fbc disabled per module param
[ 2.971630] [drm:drm_mode_setcrtc], [CRTC:3]
[ 2.971645] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
[ 2.971651] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
[ 2.971662] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[ 2.986929] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 3.097390] systemd-journald[93]: Received SIGTERM
[ 3.717182] [drm:intel_enable_rc6], Sandybridge: deep RC6 disabled
[ 3.717186] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 3.720922] [drm:gen6_enable_rps], Overclocking supported. Max: 1300MHz, Overclock max: 1300MHz
[ 3.805418] SELinux: 2048 avtab hash slots, 95514 rules.
[ 3.815116] SELinux: 2048 avtab hash slots, 95514 rules.
[ 4.019838] SELinux: 8 users, 82 roles, 4543 types, 259 bools, 1 sens, 1024 cats
[ 4.019842] SELinux: 83 classes, 95514 rules
[ 4.022492] SELinux: Completing initialization.
[ 4.022495] SELinux: Setting up existing superblocks.
[ 4.022499] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 4.022501] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 4.022508] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 4.022510] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 4.022515] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.022538] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 4.023039] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 4.023042] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 4.023484] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 4.023492] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 4.023494] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 4.023506] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 4.023511] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 4.023517] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 4.023524] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 4.023707] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 4.023709] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.023712] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.023752] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.023771] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.023775] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[ 4.023776] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.023780] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.023793] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.023796] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.023798] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.023800] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.023804] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.023809] SELinux: initialized (dev sda6, type ext4), uses xattr
[ 4.041270] type=1403 audit(1380123009.042:2): policy loaded auid=4294967295 ses=4294967295
[ 4.055557] systemd[1]: Successfully loaded SELinux policy in 401.696ms.
[ 4.066502] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
[ 4.081954] systemd[1]: Relabelled /dev and /run in 11.060ms.
[ 4.110674] LVM: Logical Volume autoactivation enabled.
[ 4.110679] LVM: Activation generator successfully completed.
[ 4.181733] systemd-readahead[192]: Failed to mark /: Invalid argument
[ 4.181896] systemd-readahead[191]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 4.182921] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 4.200445] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 4.200959] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.202755] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[ 4.227484] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[ 4.244191] systemd-udevd[228]: starting version 204
[ 4.439622] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 4.480305] wmi: Mapper loaded
[ 4.481095] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
[ 4.485577] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130517/utaddress-251)
[ 4.485584] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.485588] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130517/utaddress-251)
[ 4.485591] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.485592] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130517/utaddress-251)
[ 4.485595] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.485597] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130517/utaddress-251)
[ 4.485599] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.485601] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.488722] pps_core: LinuxPPS API ver. 1 registered
[ 4.488725] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.488732] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.491855] PTP clock support registered
[ 4.495807] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 4.496953] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 4.496956] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 4.496958] thinkpad_acpi: ThinkPad BIOS 8AET57WW (1.37 ), EC unknown
[ 4.496959] thinkpad_acpi: Lenovo ThinkPad T520, model 4243BQ9
[ 4.498434] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 4.498555] thinkpad_acpi: radio switch found; radios are disabled
[ 4.498568] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 4.498569] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 4.500313] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[ 4.501526] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 4.501694] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 4.502778] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
[ 4.517382] sdhci: Secure Digital Host Controller Interface driver
[ 4.517386] sdhci: Copyright(c) Pierre Ossman
[ 4.517485] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[ 4.525533] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 4.529864] Linux video capture interface: v2.00
[ 4.531095] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 5)
[ 4.531411] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 4.536862] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 4.536865] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 4.536966] e1000e 0000:00:19.0: setting latency timer to 64
[ 4.537021] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.537039] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 4.540827] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26
[ 4.545094] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26
[ 4.545558] microcode: CPU0 updated to revision 0x29, date = 2013-06-12
[ 4.545659] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26
[ 4.545685] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26
[ 4.545943] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
[ 4.545948] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x26
[ 4.545971] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x26
[ 4.546263] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
[ 4.546279] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x26
[ 4.546305] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x26
[ 4.546592] microcode: CPU3 updated to revision 0x29, date = 2013-06-12
[ 4.546595] perf_event_intel: PEBS enabled due to microcode update
[ 4.546639] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.550982] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[ 4.552463] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input11
[ 4.552580] usbcore: registered new interface driver uvcvideo
[ 4.552582] USB Video Class driver (1.1.1)
[ 4.555147] cfg80211: Calling CRDA to update world regulatory domain
[ 4.571884] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[ 4.571888] Copyright(c) 2003-2013 Intel Corporation
[ 4.572018] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 4.572156] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
[ 4.629648] iTCO_vendor_support: vendor-support=0
[ 4.630909] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 4.630943] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 4.631247] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.640444] cfg80211: World regulatory domain updated:
[ 4.640448] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.640450] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.640452] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.640454] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.640456] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.640457] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.735089] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 4.735104] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:ea:9a:6b
[ 4.735112] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.735173] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 4.735523] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 4.746267] systemd-udevd[259]: renamed network interface eth0 to em1
[ 4.872601] hda_codec: CX20590: BIOS auto-probing.
[ 4.873157] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 4.873166] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.873172] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[ 4.873176] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0
[ 4.873180] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs:
[ 4.873186] ALSA sound/pci/hda/hda_auto_parser.c:410 Mic=0x1b
[ 4.873190] ALSA sound/pci/hda/hda_auto_parser.c:410 Internal Mic=0x23
[ 4.873195] ALSA sound/pci/hda/hda_auto_parser.c:410 Dock Mic=0x1a
[ 4.874287] ALSA sound/pci/hda/patch_conexant.c:3414 hda_codec: Enable sync_write for stable communication
[ 4.877811] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 4.879640] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.879655] SELinux: initialized (dev sda3, type ext3), uses xattr
[ 4.884552] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.884667] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.884754] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 4.884836] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 4.884910] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 4.884987] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 4.885059] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 4.900808] type=1305 audit(1380123009.901:3): audit_pid=349 old=0 auid=4294967295 ses=4294967295
subj=system_u:system_r:auditd_t:s0 res=1
[ 5.735143] systemd-logind[379]: Watching system buttons on /dev/input/event2 (Power Button)
[ 5.735280] systemd-logind[379]: Watching system buttons on /dev/input/event8 (Video Bus)
[ 5.735347] systemd-logind[379]: Watching system buttons on /dev/input/event0 (Lid Switch)
[ 5.735403] systemd-logind[379]: Watching system buttons on /dev/input/event1 (Sleep Button)
[ 5.735481] systemd-logind[379]: Watching system buttons on /dev/input/event9 (ThinkPad Extra Buttons)
[ 5.920803] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 5.933896] Ebtables v2.0 registered
[ 5.986358] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 6.042192] Bluetooth: Core ver 2.16
[ 6.042253] NET: Registered protocol family 31
[ 6.042255] Bluetooth: HCI device and connection manager initialized
[ 6.042263] Bluetooth: HCI socket layer initialized
[ 6.042265] Bluetooth: L2CAP socket layer initialized
[ 6.042270] Bluetooth: SCO socket layer initialized
[ 6.057566] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.057569] Bluetooth: BNEP filters: protocol multicast
[ 6.057583] Bluetooth: BNEP socket layer initialized
[ 6.148298] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 6.171436] Bridge firewalling registered
[ 6.248722] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 6.248982] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
[ 6.265639] tun: Universal TUN/TAP device driver, 1.6
[ 6.265643] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 6.295982] device virbr0-nic entered promiscuous mode
[ 6.393556] [drm:i915_driver_open],
[ 6.400057] [drm:i915_driver_open],
[ 6.400067] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
[ 6.400346] [drm:i915_driver_open],
[ 6.400603] [drm:i915_driver_open],
[ 6.400616] [drm:i915_driver_open],
[ 6.400886] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
[ 6.400890] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
[ 6.400933] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[ 6.400936] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[ 6.400947] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[ 6.400949] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
[ 6.400952] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
[ 6.400957] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[ 6.401174] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 6.401177] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[ 6.401182] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 6.401183] [drm:intel_crt_detect], CRT not detected via hotplug
[ 6.401340] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 6.401343] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 6.401345] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 6.401346] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 6.401722] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 6.401724] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 6.401726] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 6.401728] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[ 6.401733] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 6.401735] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[ 6.401738] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 6.401739] [drm:intel_crt_detect], CRT not detected via hotplug
[ 6.401897] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 6.401899] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 6.401901] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 6.401902] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 6.402265] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 6.402267] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 6.402268] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 6.402269] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[ 6.402289] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[ 6.402290] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[ 6.409646] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 6.409650] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[ 6.409665] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[ 6.409671] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[ 6.417648] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 6.417651] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[ 6.417694] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 6.417695] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 6.417699] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 6.417700] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 6.417701] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 6.417704] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 6.417714] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[ 6.417716] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[ 6.417895] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 6.417899] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 6.417900] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[ 6.417905] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[ 6.417906] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[ 6.418074] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 6.418075] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 6.418076] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[ 6.418102] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 6.418104] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[ 6.418261] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 6.418262] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 6.418263] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[ 6.418265] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 6.418266] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[ 6.418423] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 6.418424] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 6.418425] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[ 6.418439] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 6.418440] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 6.418443] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 6.418445] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 6.418446] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 6.418448] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 6.418458] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[ 6.418459] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[ 6.418462] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
[ 6.418463] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[ 6.418464] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[ 6.418466] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
[ 6.418492] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[ 6.418494] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[ 6.418503] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[ 6.418504] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
[ 6.418506] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
[ 6.418508] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[ 6.419211] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 6.419214] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[ 6.419218] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 6.419219] [drm:intel_crt_detect], CRT not detected via hotplug
[ 6.419378] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 6.419381] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 6.419382] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 6.419384] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 6.419762] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 6.419764] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 6.419766] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 6.419767] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[ 6.419988] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 6.419991] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[ 6.419994] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 6.419995] [drm:intel_crt_detect], CRT not detected via hotplug
[ 6.420152] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 6.420155] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 6.420157] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 6.420158] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 6.420523] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 6.420525] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 6.420527] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 6.420529] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[ 6.420552] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[ 6.420555] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[ 6.427650] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 6.427654] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[ 6.427669] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[ 6.427671] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[ 6.435654] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 6.435659] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[ 6.435715] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 6.435719] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 6.435723] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 6.435726] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 6.435728] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 6.435731] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 6.435749] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[ 6.435751] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[ 6.435908] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 6.435910] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 6.435911] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[ 6.435914] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[ 6.435915] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[ 6.436072] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 6.436073] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 6.436074] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[ 6.436091] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 6.436094] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[ 6.436257] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 6.436260] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 6.436263] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[ 6.436268] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 6.436270] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[ 6.436432] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 6.436436] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 6.436438] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 6.436440] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[ 6.436468] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 6.436470] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 6.436474] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 6.436477] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 6.436478] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 6.436481] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 6.436496] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[ 6.436498] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[ 6.436501] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
[ 6.436503] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[ 6.436505] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[ 6.436508] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
[ 6.439518] [drm:asle_set_backlight], bclp = 0x800000ff
[ 6.439525] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[ 6.439527] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
[ 6.439529] [drm:asle_set_pwm_freq], PWM freq is not supported
[ 6.440077] [drm:asle_set_backlight], bclp = 0x800000ff
[ 6.440081] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[ 6.440083] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
[ 6.440084] [drm:asle_set_pwm_freq], PWM freq is not supported
[ 6.441311] [drm:drm_mode_addfb], [FB:33]
[ 6.441353] [drm:drm_mode_setcrtc], [CRTC:3]
[ 6.441355] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
[ 6.441357] [drm:intel_crtc_set_config], [CRTC:3] [FB:33] #connectors=1 (x y) (0 0)
[ 6.441360] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[ 6.445333] [drm:ironlake_update_plane], Writing base 01044000 00000000 0 0 7680
[ 6.448640] [drm:intel_update_fbc], fbc set to per-chip default
[ 6.448644] [drm:intel_update_fbc], fbc disabled per module param
[ 6.448684] [drm:drm_mode_setcrtc], [CRTC:5]
[ 6.448686] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
[ 6.448688] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[ 8.031174] e1000e: em1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 8.031189] e1000e 0000:00:19.0 em1: 10/100 speed: disabling TSO
[ 8.031250] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
[ 8.421083] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 8.757041] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input19
[ 8.925160] virbr0: topology change detected, propagating
[ 8.925173] virbr0: port 1(virbr0-nic) entered forwarding state
[ 8.925202] virbr0: port 1(virbr0-nic) entered forwarding state
[ 8.962042] virbr0: port 1(virbr0-nic) entered disabled state
[ 10.242281] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 10.242325] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 10.275116] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 10.278068] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 27.729447] [drm:i915_hotplug_work_func], running encoder hotplug functions
[ 27.729462] [drm:i915_hotplug_work_func], Connector VGA-1 (pin 1) received hotplug event.
[ 27.729472] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
[ 27.729477] [drm:intel_crt_detect], CRT detected via hotplug
[ 27.729481] [drm:intel_hpd_irq_event], [CONNECTOR:14:VGA-1] status updated from 2 to 1
[ 27.736261] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[ 27.736274] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[ 27.736643] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[ 27.736651] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
[ 27.736659] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
[ 27.736676] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[ 27.737201] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 27.737208] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[ 27.737216] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
[ 27.737220] [drm:intel_crt_detect], CRT detected via hotplug
[ 27.750371] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 27.750401] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] probed modes :
[ 27.750406] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 27.750415] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 27.750421] [drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 27.750428] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 27.750434] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 27.750440] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 27.750446] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 27.750452] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 27.750458] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 27.750464] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 27.750470] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 27.750476] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 27.750482] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 27.750488] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 27.750494] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 27.750499] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 27.750522] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 27.750612] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[ 27.750617] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[ 27.758319] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 27.758326] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[ 27.758337] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[ 27.758341] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[ 27.766324] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 27.766333] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[ 27.766391] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 27.766399] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 27.766406] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 27.766413] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 27.766416] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 27.766422] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 27.766431] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[ 27.766435] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[ 27.766677] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 27.766690] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 27.766696] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[ 27.766713] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[ 27.766718] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[ 27.766916] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 27.766922] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 27.766927] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[ 27.766948] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 27.766952] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[ 27.767120] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 27.767125] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 27.767129] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[ 27.767138] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 27.767141] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[ 27.767339] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 27.767346] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 27.767353] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[ 27.767374] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 27.767409] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 27.767433] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 27.767460] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 27.767479] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 27.767487] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 27.767499] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[ 27.767505] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[ 27.767513] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
[ 27.767524] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[ 27.767531] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[ 27.767540] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
[ 33.091303] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[ 33.091318] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[ 33.091347] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[ 33.091352] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
[ 33.091361] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
[ 33.091374] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[ 33.091933] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 33.091937] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[ 33.091942] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
[ 33.091944] [drm:intel_crt_detect], CRT detected via hotplug
[ 33.105079] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 33.105116] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] probed modes :
[ 33.105122] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 33.105130] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 33.105136] [drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 33.105143] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 33.105149] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 33.105155] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 33.105161] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 33.105167] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 33.105173] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 33.105179] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 33.105185] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 33.105191] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 33.105197] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 33.105202] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 33.105208] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 33.105214] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 33.105247] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 33.105344] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[ 33.105350] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[ 33.112744] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 33.112754] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[ 33.112798] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[ 33.112803] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[ 33.120747] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 33.120753] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[ 33.120789] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 33.120794] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 33.120801] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 33.120808] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 33.120811] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 33.120817] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 33.120826] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[ 33.120830] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[ 33.121026] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 33.121034] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 33.121038] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[ 33.121049] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[ 33.121053] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[ 33.121262] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 33.121269] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 33.121273] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[ 33.121289] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 33.121294] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[ 33.121466] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 33.121471] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 33.121475] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[ 33.121484] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 33.121488] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[ 33.121657] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 33.121662] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 33.121666] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[ 33.121678] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 33.121682] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 33.121688] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 33.121693] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 33.121697] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 33.121702] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 33.121710] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[ 33.121714] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[ 33.121740] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
[ 33.121747] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[ 33.121751] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[ 33.121756] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
[ 33.640251] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[ 33.640258] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[ 33.640269] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[ 33.640271] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
[ 33.640274] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
[ 33.640279] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[ 33.640474] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 33.640477] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[ 33.640481] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
[ 33.640483] [drm:intel_crt_detect], CRT detected via hotplug
[ 33.654037] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 33.654049] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] probed modes :
[ 33.654050] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 33.654052] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 33.654054] [drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 33.654056] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 33.654057] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 33.654059] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 33.654060] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 33.654062] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 33.654063] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 33.654065] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 33.654066] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 33.654068] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 33.654069] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 33.654071] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 33.654072] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 33.654074] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 33.654089] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 33.654123] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[ 33.654124] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[ 33.661890] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 33.661895] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[ 33.661917] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[ 33.661920] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[ 33.669885] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 33.669890] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[ 33.669904] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 33.669906] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 33.669910] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 33.669911] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 33.669912] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 33.669915] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 33.669917] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[ 33.669918] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[ 33.670152] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 33.670161] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 33.670166] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[ 33.670176] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[ 33.670180] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[ 33.670356] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 33.670397] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 33.670398] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[ 33.670403] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 33.670404] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[ 33.670553] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 33.670556] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 33.670558] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[ 33.670562] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 33.670564] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[ 33.670716] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 33.670717] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 33.670718] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[ 33.670723] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 33.670724] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 33.670727] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 33.670729] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 33.670730] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 33.670732] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 33.670735] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[ 33.670736] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[ 33.670737] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
[ 33.670739] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[ 33.670739] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[ 33.670742] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
[ 33.677531] [drm:asle_set_backlight], bclp = 0x800000ff
[ 33.677537] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[ 33.677538] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
[ 33.677539] [drm:asle_set_pwm_freq], PWM freq is not supported
[ 33.726901] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 33.727110] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 33.727113] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 33.727289] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 33.727290] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 33.727321] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
[ 33.727323] [drm:intel_crt_detect], CRT detected via hotplug
[ 33.733627] [drm:asle_set_backlight], bclp = 0x800000ff
[ 33.733632] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[ 33.733633] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
[ 33.733635] [drm:asle_set_pwm_freq], PWM freq is not supported
[ 33.735261] [drm:asle_set_backlight], bclp = 0x800000ff
[ 33.735267] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[ 33.735269] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
[ 33.735270] [drm:asle_set_pwm_freq], PWM freq is not supported
[ 34.118911] [drm:asle_set_backlight], bclp = 0x80000003
[ 34.118929] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[ 34.118938] [drm:intel_panel_actually_set_backlight], set backlight PWM = 51
[ 34.118946] [drm:asle_set_pwm_freq], PWM freq is not supported
[ 34.120083] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 34.490192] [drm:intel_disable_shared_dpll], disable PCH DPLL A (active 1, on? 1) for crtc 3
[ 34.490211] [drm:intel_disable_shared_dpll], disabling PCH DPLL A
[ 34.490631] [drm:intel_update_fbc], no output, disabling
[ 34.490657] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
[ 34.490664] [drm:check_encoder_state], [ENCODER:15:DAC-15]
[ 34.490670] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[ 34.490675] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
[ 34.490681] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
[ 34.490686] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
[ 34.490691] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
[ 34.490697] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
[ 34.490702] [drm:check_crtc_state], [CRTC:3]
[ 34.490709] [drm:check_crtc_state], [CRTC:5]
[ 34.490713] [drm:check_shared_dpll_state], PCH DPLL A
[ 34.490721] [drm:check_shared_dpll_state], PCH DPLL B
[ 34.494256] [drm:drm_mode_addfb], [FB:50]
[ 34.494311] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
[ 34.494321] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [NOCRTC]
[ 34.494326] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[ 34.494330] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 34.494336] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[ 34.494359] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
[ 34.494365] [drm:check_encoder_state], [ENCODER:15:DAC-15]
[ 34.494371] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[ 34.494377] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
[ 34.494382] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
[ 34.494387] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
[ 34.494393] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
[ 34.494398] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
[ 34.494403] [drm:check_crtc_state], [CRTC:3]
[ 34.494408] [drm:check_crtc_state], [CRTC:5]
[ 34.494412] [drm:check_shared_dpll_state], PCH DPLL A
[ 34.494420] [drm:check_shared_dpll_state], PCH DPLL B
[ 34.505438] [drm:drm_mode_setcrtc], [CRTC:3]
[ 34.505447] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
[ 34.505449] [drm:intel_crtc_set_config], [CRTC:3] [FB:50] #connectors=1 (x y) (0 0)
[ 34.505451] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
[ 34.505464] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 34.505465] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
[ 34.505467] [drm:drm_mode_debug_printmodeline], Modeline 33:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[ 34.505468] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[ 34.505470] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[ 34.505471] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 34.505472] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 34.505474] [drm:connected_sink_compute_bpp], [CONNECTOR:7:LVDS-1] checking for sink bpp constrains
[ 34.505477] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
[ 34.505479] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe A, lanes 2
[ 34.505480] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[ 34.505482] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 34.505483] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 34.505484] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 34.505485] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
[ 34.505486] [drm:intel_dump_pipe_config], requested mode:
[ 34.505487] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[ 34.505488] [drm:intel_dump_pipe_config], adjusted mode:
[ 34.505489] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x0 0x5
[ 34.505490] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 34.505491] [drm:intel_dump_pipe_config], pch pfit: pos: 0x011d0000, size: 0x05460438
[ 34.505492] [drm:intel_dump_pipe_config], ips: 0
[ 34.505495] [drm:ironlake_get_refclk], using SSC reference clock of 120 MHz
[ 34.505510] [drm:intel_get_shared_dpll], CRTC:3 allocated PCH DPLL A
[ 34.505511] [drm:intel_get_shared_dpll], using PCH DPLL A for pipe A
[ 34.505512] [drm:intel_get_shared_dpll], setting up PCH DPLL A
[ 34.512154] [drm:ironlake_update_plane], Writing base 02057000 00000000 0 0 5120
[ 34.512181] [drm:intel_update_fbc], no output, disabling
[ 34.512197] [drm:intel_crtc_mode_set], [ENCODER:8:LVDS-8] set [MODE:0:]
[ 34.512207] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[ 34.512214] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
[ 34.512220] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
[ 34.512225] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[ 34.564244] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 34.616207] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 34.617038] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[ 34.617045] [drm:gen6_fdi_link_train], FDI train 1 done.
[ 34.617707] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[ 34.617714] [drm:gen6_fdi_link_train], FDI train 2 done.
[ 34.617716] [drm:gen6_fdi_link_train], FDI train done.
[ 34.617720] [drm:ironlake_enable_shared_dpll], enable PCH DPLL A (active 0, on? 0)for crtc 3
[ 34.617726] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL A
[ 34.618965] [drm:intel_update_fbc], fbc set to per-chip default
[ 34.618969] [drm:intel_update_fbc], fbc disabled per module param
[ 35.038327] [drm:intel_panel_actually_set_backlight], set backlight PWM = 51
[ 35.056348] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1]
[ 35.056375] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
[ 35.056382] [drm:check_encoder_state], [ENCODER:15:DAC-15]
[ 35.056388] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[ 35.056393] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
[ 35.056399] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
[ 35.056404] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
[ 35.056409] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
[ 35.056414] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
[ 35.056420] [drm:check_crtc_state], [CRTC:3]
[ 35.056444] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.flags (expected 1, found 0)
[ 35.056451] ------------[ cut here ]------------
[ 35.056515] WARNING: CPU: 0 PID: 605 at drivers/gpu/drm/i915/intel_display.c:8286 check_crtc_state+0x5cf/0xa50 [i915]()
[ 35.056518] pipe state doesn't match!
[ 35.056521] Modules linked in: ebtable_nat xt_CHECKSUM nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_nat nf_nat_ipv6 ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 tun nf_defrag_ipv6 bridge stp llc iptable_nat nf_nat_ipv4 nf_nat iptable_mangle bnep bluetooth nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_conexant iTCO_wdt iTCO_vendor_support x86_pkg_temp_thermal coretemp kvm_intel kvm snd_hda_intel snd_hda_codec snd_hwdep snd_seq iwlwifi crc32c_intel snd_seq_device ghash_clmulni_intel snd_pcm cfg80211 uvcvideo videobuf2_vmalloc microcode videobuf2_memops videobuf2_core e1000e sdhci_pci videodev pcspkr serio_raw sdhci mmc_core thinkpad_acpi snd_page_alloc i2c_i801 snd_t
imer ptp snd
[ 35.056597] pps_core shpchp lpc_ich mfd_core tpm_tis wmi soundcore tpm rfkill tpm_bios uinput binfmt_misc firewire_ohci firewire_core crc_itu_t i915 i2c_algo_bit drm_kms_helper drm i2c_core video
[ 35.056627] CPU: 0 PID: 605 Comm: X Not tainted 3.11.0-mst #258
[ 35.056631] Hardware name: LENOVO 4243BQ9/4243BQ9, BIOS 8AET57WW (1.37 ) 04/05/2012
[ 35.056635] 000000000000205e ffff8801fede7728 ffffffff81647c9b ffff8801fede7768
[ 35.056644] ffffffff81056d6c ffff880212201478 0000000000000002 ffff8802144d5000
[ 35.056650] 0000000000000001 ffff880212201478 ffff880212201000 ffff8801fede7848
[ 35.056657] Call Trace:
[ 35.056671] [<ffffffff81647c9b>] dump_stack+0x6a/0x77
[ 35.056683] [<ffffffff81056d6c>] warn_slowpath_common+0x8c/0xc0
[ 35.056691] [<ffffffff81056e9e>] warn_slowpath_fmt+0x6e/0x70
[ 35.056724] [<ffffffffa0084385>] ? i915_read32+0x75/0x130 [i915]
[ 35.056750] [<ffffffffa0084385>] ? i915_read32+0x75/0x130 [i915]
[ 35.056788] [<ffffffffa00bf275>] ? intel_lvds_get_config+0x45/0xb0 [i915]
[ 35.056820] [<ffffffffa00ae6ef>] check_crtc_state+0x5cf/0xa50 [i915]
[ 35.056856] [<ffffffffa00b59e5>] intel_modeset_check_state+0x2e5/0x7c0 [i915]
[ 35.056887] [<ffffffffa00bc54d>] intel_set_mode+0x2d/0x40 [i915]
[ 35.056917] [<ffffffffa00bd338>] intel_crtc_set_config+0x878/0x990 [i915]
[ 35.056952] [<ffffffffa003189b>] drm_mode_set_config_internal+0x5b/0xf0 [drm]
[ 35.056978] [<ffffffffa0032efe>] drm_mode_setcrtc+0x31e/0x5e0 [drm]
[ 35.057003] [<ffffffffa002163a>] drm_ioctl+0x3da/0x660 [drm]
[ 35.057033] [<ffffffffa0032be0>] ? drm_mode_create+0x70/0x70 [drm]
[ 35.057042] [<ffffffff812963aa>] ? file_has_perm+0xaa/0xb0
[ 35.057084] [<ffffffffa00ebbc5>] i915_compat_ioctl+0x45/0x50 [i915]
[ 35.057094] [<ffffffff811e6336>] compat_sys_ioctl+0x106/0x13a0
[ 35.057104] [<ffffffff811930d8>] ? fsnotify_access+0x68/0x80
[ 35.057112] [<ffffffff81193958>] ? vfs_read+0xd8/0x130
[ 35.057119] [<ffffffff810dd9bb>] ? __audit_syscall_exit+0x23b/0x2e0
[ 35.057129] [<ffffffff81656875>] sysenter_dispatch+0x7/0x1a
[ 35.057134] ---[ end trace da13b750719727e1 ]---
[ 35.057137] [drm:intel_dump_pipe_config], [CRTC:3][hw state] config for pipe A
[ 35.057142] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 35.057146] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 35.057150] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
[ 35.057155] [drm:intel_dump_pipe_config], requested mode:
[ 35.057159] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1280 0 0 0 1024 0 0 0 0x0 0x0
[ 35.057166] [drm:intel_dump_pipe_config], adjusted mode:
[ 35.057169] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 35.057175] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 35.057179] [drm:intel_dump_pipe_config], pch pfit: pos: 0x011d0000, size: 0x05460438
[ 35.057183] [drm:intel_dump_pipe_config], ips: 0
[ 35.057187] [drm:intel_dump_pipe_config], [CRTC:3][sw state] config for pipe A
[ 35.057190] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 35.057194] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 35.057197] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
[ 35.057202] [drm:intel_dump_pipe_config], requested mode:
[ 35.057206] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[ 35.057212] [drm:intel_dump_pipe_config], adjusted mode:
[ 35.057215] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x0 0x5
[ 35.057221] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 35.057224] [drm:intel_dump_pipe_config], pch pfit: pos: 0x011d0000, size: 0x05460438
[ 35.057272] [drm:intel_dump_pipe_config], ips: 0
[ 35.057277] [drm:check_crtc_state], [CRTC:5]
[ 35.057282] [drm:check_shared_dpll_state], PCH DPLL A
[ 35.057290] [drm:check_shared_dpll_state], PCH DPLL B
[ 35.058635] [drm:asle_set_backlight], bclp = 0x800000ff
[ 35.058644] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[ 35.058648] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
[ 35.058653] [drm:asle_set_pwm_freq], PWM freq is not supported
[ 35.061950] [drm:drm_mode_setcrtc], [CRTC:5]
[ 35.061964] [drm:drm_mode_setcrtc], [CONNECTOR:14:VGA-1]
[ 35.061967] [drm:intel_crtc_set_config], [CRTC:5] [FB:50] #connectors=1 (x y) (0 0)
[ 35.061973] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
[ 35.061975] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 35.061976] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 35.061978] [drm:drm_mode_debug_printmodeline], Modeline 33:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[ 35.061980] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[ 35.061982] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[ 35.061984] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:VGA-1] to [CRTC:5]
[ 35.061985] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 35.061987] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 35.061989] [drm:connected_sink_compute_bpp], [CONNECTOR:14:VGA-1] checking for sink bpp constrains
[ 35.061992] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe B, lanes 2
[ 35.061993] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 35.061994] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
[ 35.061996] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 35.061996] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 35.061997] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
[ 35.061999] [drm:intel_dump_pipe_config], requested mode:
[ 35.061999] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[ 35.062001] [drm:intel_dump_pipe_config], adjusted mode:
[ 35.062002] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[ 35.062003] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 35.062004] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
[ 35.062005] [drm:intel_dump_pipe_config], ips: 0
[ 35.062023] [drm:intel_get_shared_dpll], CRTC:5 allocated PCH DPLL B
[ 35.062024] [drm:intel_get_shared_dpll], using PCH DPLL B for pipe B
[ 35.062024] [drm:intel_get_shared_dpll], setting up PCH DPLL B
[ 35.062355] [drm:ironlake_update_plane], Writing base 02057000 00000000 0 0 5120
[ 35.062360] [drm:intel_update_fbc], fbc set to per-chip default
[ 35.062361] [drm:intel_update_fbc], fbc disabled per module param
[ 35.062365] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[ 35.062367] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
[ 35.062369] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
[ 35.062371] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[ 35.062372] [drm:intel_crtc_mode_set], [ENCODER:15:DAC-15] set [MODE:0:]
[ 35.062378] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[ 35.062379] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[ 35.114395] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 35.166363] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 35.167193] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[ 35.167200] [drm:gen6_fdi_link_train], FDI train 1 done.
[ 35.167862] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[ 35.167870] [drm:gen6_fdi_link_train], FDI train 2 done.
[ 35.167873] [drm:gen6_fdi_link_train], FDI train done.
[ 35.167877] [drm:ironlake_enable_shared_dpll], enable PCH DPLL B (active 0, on? 0)for crtc 5
[ 35.167883] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL B
[ 35.169123] [drm:intel_update_fbc], more than one pipe active, disabling compression
[ 35.187376] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1]
[ 35.187393] [drm:intel_connector_check_state], [CONNECTOR:14:VGA-1]
[ 35.187412] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
[ 35.187419] [drm:check_encoder_state], [ENCODER:15:DAC-15]
[ 35.187424] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[ 35.187430] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
[ 35.187436] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
[ 35.187440] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
[ 35.187446] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
[ 35.187451] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
[ 35.187457] [drm:check_crtc_state], [CRTC:3]
[ 35.187481] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.flags (expected 1, found 0)
[ 35.187489] ------------[ cut here ]------------
[ 35.187552] WARNING: CPU: 0 PID: 605 at drivers/gpu/drm/i915/intel_display.c:8286 check_crtc_state+0x5cf/0xa50 [i915]()
[ 35.187556] pipe state doesn't match!
[ 35.187558] Modules linked in: ebtable_nat xt_CHECKSUM nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_nat nf_nat_ipv6 ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 tun nf_defrag_ipv6 bridge stp llc iptable_nat nf_nat_ipv4 nf_nat iptable_mangle bnep bluetooth nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_conexant iTCO_wdt iTCO_vendor_support x86_pkg_temp_thermal coretemp kvm_intel kvm snd_hda_intel snd_hda_codec snd_hwdep snd_seq iwlwifi crc32c_intel snd_seq_device ghash_clmulni_intel snd_pcm cfg80211 uvcvideo videobuf2_vmalloc microcode videobuf2_memops videobuf2_core e1000e sdhci_pci videodev pcspkr serio_raw sdhci mmc_core thinkpad_acpi snd_page_alloc i2c_i801 snd_t
imer ptp snd
[ 35.187636] pps_core shpchp lpc_ich mfd_core tpm_tis wmi soundcore tpm rfkill tpm_bios uinput binfmt_misc firewire_ohci firewire_core crc_itu_t i915 i2c_algo_bit drm_kms_helper drm i2c_core video
[ 35.187666] CPU: 0 PID: 605 Comm: X Tainted: G W 3.11.0-mst #258
[ 35.187670] Hardware name: LENOVO 4243BQ9/4243BQ9, BIOS 8AET57WW (1.37 ) 04/05/2012
[ 35.187675] 000000000000205e ffff8801fede7728 ffffffff81647c9b ffff8801fede7768
[ 35.187683] ffffffff81056d6c ffff880212201478 0000000000000002 ffff8802144d5000
[ 35.187690] 0000000000000001 ffff880212201478 ffff880212201000 ffff8801fede7848
[ 35.187697] Call Trace:
[ 35.187711] [<ffffffff81647c9b>] dump_stack+0x6a/0x77
[ 35.187723] [<ffffffff81056d6c>] warn_slowpath_common+0x8c/0xc0
[ 35.187732] [<ffffffff81056e9e>] warn_slowpath_fmt+0x6e/0x70
[ 35.187764] [<ffffffffa0084385>] ? i915_read32+0x75/0x130 [i915]
[ 35.187789] [<ffffffffa0084385>] ? i915_read32+0x75/0x130 [i915]
[ 35.187828] [<ffffffffa00bf275>] ? intel_lvds_get_config+0x45/0xb0 [i915]
[ 35.187861] [<ffffffffa00ae6ef>] check_crtc_state+0x5cf/0xa50 [i915]
[ 35.187897] [<ffffffffa00b59e5>] intel_modeset_check_state+0x2e5/0x7c0 [i915]
[ 35.187929] [<ffffffffa00bc54d>] intel_set_mode+0x2d/0x40 [i915]
[ 35.187959] [<ffffffffa00bd338>] intel_crtc_set_config+0x878/0x990 [i915]
[ 35.187993] [<ffffffffa003189b>] drm_mode_set_config_internal+0x5b/0xf0 [drm]
[ 35.188020] [<ffffffffa0032efe>] drm_mode_setcrtc+0x31e/0x5e0 [drm]
[ 35.188044] [<ffffffffa002163a>] drm_ioctl+0x3da/0x660 [drm]
[ 35.188075] [<ffffffffa0032be0>] ? drm_mode_create+0x70/0x70 [drm]
[ 35.188084] [<ffffffff812963aa>] ? file_has_perm+0xaa/0xb0
[ 35.188147] [<ffffffffa00ebbc5>] i915_compat_ioctl+0x45/0x50 [i915]
[ 35.188158] [<ffffffff811e6336>] compat_sys_ioctl+0x106/0x13a0
[ 35.188168] [<ffffffff811930d8>] ? fsnotify_access+0x68/0x80
[ 35.188176] [<ffffffff81193958>] ? vfs_read+0xd8/0x130
[ 35.188183] [<ffffffff810dd9bb>] ? __audit_syscall_exit+0x23b/0x2e0
[ 35.188193] [<ffffffff81656875>] sysenter_dispatch+0x7/0x1a
[ 35.188198] ---[ end trace da13b750719727e2 ]---
[ 35.188202] [drm:intel_dump_pipe_config], [CRTC:3][hw state] config for pipe A
[ 35.188207] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 35.188210] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 35.188214] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
[ 35.188220] [drm:intel_dump_pipe_config], requested mode:
[ 35.188224] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1280 0 0 0 1024 0 0 0 0x0 0x0
[ 35.188231] [drm:intel_dump_pipe_config], adjusted mode:
[ 35.188234] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 35.188239] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 35.188244] [drm:intel_dump_pipe_config], pch pfit: pos: 0x011d0000, size: 0x05460438
[ 35.188248] [drm:intel_dump_pipe_config], ips: 0
[ 35.188251] [drm:intel_dump_pipe_config], [CRTC:3][sw state] config for pipe A
[ 35.188255] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 35.188258] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 35.188262] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
[ 35.188311] [drm:intel_dump_pipe_config], requested mode:
[ 35.188314] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[ 35.188320] [drm:intel_dump_pipe_config], adjusted mode:
[ 35.188323] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x0 0x5
[ 35.188329] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 35.188333] [drm:intel_dump_pipe_config], pch pfit: pos: 0x011d0000, size: 0x05460438
[ 35.188337] [drm:intel_dump_pipe_config], ips: 0
[ 35.188340] [drm:check_crtc_state], [CRTC:5]
[ 35.188363] [drm:check_shared_dpll_state], PCH DPLL A
[ 35.188395] [drm:check_shared_dpll_state], PCH DPLL B
[ 36.913619] [drm:asle_set_backlight], bclp = 0x800000ff
[ 36.913625] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[ 36.913627] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
[ 36.913629] [drm:asle_set_pwm_freq], PWM freq is not supported
[ 36.914907] [drm:asle_set_backlight], bclp = 0x800000ff
[ 36.914911] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[ 36.914913] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
[ 36.914915] [drm:asle_set_pwm_freq], PWM freq is not supported
[ 42.123964] systemd-journald[213]: File /var/log/journal/2b6e810f801e4f458fa97f9a3b9c8a3e/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 44.837333] [drm:intel_crtc_cursor_set], cursor off
[ 44.837350] [drm:intel_crtc_cursor_set], cursor off
[ 45.027988] [drm:intel_crtc_cursor_set], cursor off
[ 45.027998] [drm:intel_crtc_cursor_set], cursor off
[ 45.073569] [drm:intel_crtc_cursor_set], cursor off
[ 45.073577] [drm:intel_crtc_cursor_set], cursor off
[ 45.278491] [drm:intel_crtc_cursor_set], cursor off
[ 45.278504] [drm:intel_crtc_cursor_set], cursor off
[ 45.542351] [drm:intel_crtc_cursor_set], cursor off
[ 45.542369] [drm:intel_crtc_cursor_set], cursor off
[ 57.431075] [drm:intel_crtc_cursor_set], cursor off
[ 57.431092] [drm:intel_crtc_cursor_set], cursor off
[ 58.313538] [drm:intel_crtc_cursor_set], cursor off
[ 58.313555] [drm:intel_crtc_cursor_set], cursor off
[ 59.545153] [drm:intel_crtc_cursor_set], cursor off
[ 59.545171] [drm:intel_crtc_cursor_set], cursor off
[ 67.663884] [drm:intel_crtc_cursor_set], cursor off
[ 67.663983] [drm:intel_crtc_cursor_set], cursor off
[ 74.810144] [drm:intel_crtc_cursor_set], cursor off
[ 74.810159] [drm:intel_crtc_cursor_set], cursor off
[ 78.400204] [drm:intel_crtc_cursor_set], cursor off
[ 78.400225] [drm:intel_crtc_cursor_set], cursor off
[ 79.914106] [drm:intel_crtc_cursor_set], cursor off
[ 79.914123] [drm:intel_crtc_cursor_set], cursor off
[ 80.753957] [drm:intel_crtc_cursor_set], cursor off
[ 80.753975] [drm:intel_crtc_cursor_set], cursor off
[ 82.211369] [drm:intel_crtc_cursor_set], cursor off
[ 82.211386] [drm:intel_crtc_cursor_set], cursor off
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Intel-gfx] Fwd: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ]
2013-09-25 15:34 ` Michael S. Tsirkin
@ 2013-09-25 15:48 ` Daniel Vetter
2013-09-29 6:28 ` Michael S. Tsirkin
0 siblings, 1 reply; 13+ messages in thread
From: Daniel Vetter @ 2013-09-25 15:48 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: Dave Airlie, Stephen Rothwell, intel-gfx,
Linux Kernel Mailing List, linux-next, DRI, Sedat Dilek
On Wed, Sep 25, 2013 at 06:34:38PM +0300, Michael S. Tsirkin wrote:
> On Wed, Sep 25, 2013 at 09:56:52AM +0200, Daniel Vetter wrote:
> > On Wed, Sep 25, 2013 at 01:17:52PM +1000, Dave Airlie wrote:
> > > On Mon, Sep 23, 2013 at 12:14 AM, Michael S. Tsirkin <mst@redhat.com> wrote:
> > > > On Mon, Aug 26, 2013 at 04:05:11PM +0300, Michael S. Tsirkin wrote:
> > > >> On Wed, Aug 21, 2013 at 11:22:58AM +0200, Sedat Dilek wrote:
> > > >> > [ Re: [Intel-gfx] i915 producing warnings with kernel 3.11-rc5 ]
> > > >> >
> > > >> > Hi,
> > > >> >
> > > >> > saw your posting in [1]... can you try the patches below?
> > > >> > Not sure if they apply.
> > > >> > Did you try v3.11-rc6(+)... or drm-intel-nightly?
> > > >> >
> > > >> > Regards,
> > > >> > - Sedat -
> > > >> >
> > > >> > [1] http://lists.freedesktop.org/archives/intel-gfx/2013-August/032154.html
> > > >>
> > > >> Same thing observed with v3.11-rc7.
> > > >
> > > > I still see this with 3.11.
> > > > Following this message, my VGA monitor goes blank and
> > > > shows an error suggesting a wrong resolution or frequency are set.
> > > > Anyone?
> > >
> > > Daniel, Jesse?
> > >
> > > still ongoing I think.
> >
> > Yeah, I've dismissed it since the original issue in this thread is
> > resolved. But it's something else.
> >
> > Note to bug reporters: Please don't me-too, but start a new thread/report
> > - almost every gfx bug is different, even if it superficially looks the
> > same.
> >
> > Michael, can you please boot with drm.debug=0xe, reproduce the problem and
> > then attach the complete dmesg? Please make sure dmesg contains everything
> > since boot-up, if not please increase the dmesg buffer size with
> > log_buf_len=4M.
>
> Complete dmesg attached.
>
> > Also please test the latest drm-intel-fixes release to check that we
> > haven't just forgotten to send the patch to stable (there's at least one
> > flags mismatch fix already in-flight to 3.11 stable kernels).
> >
> > Thanks, Daniel
>
> Is it included in latest -rc2? It's easier for me to test that.
-rc2 should be good enough for testing - the additional patches in
-fixes won't affect your issue.
-Daniel
>
> > --
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > +41 (0) 79 365 57 48 - http://blog.ffwll.ch
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Initializing cgroup subsys cpuacct
> [ 0.000000] Linux version 3.11.0-mst (mst@robin.redhat.com) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #258 SMP Sun Sep 22 02:49:15 IDT 2013
> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.11.0-mst root=UUID=75d505b0-6e76-4f40-9cbc-0d6e700effd1 ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=True KEYTABLE=us rd.luks=0 LANG=en_US.UTF-8 rhgb quiet drm.debug=0xe
> [ 0.000000] Disabled fast string operations
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da99efff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000da99f000-0x00000000dae9efff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000021e600000-0x000000021e7fffff] reserved
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.6 present.
> [ 0.000000] DMI: LENOVO 4243BQ9/4243BQ9, BIOS 8AET57WW (1.37 ) 04/05/2012
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] No AGP bridge found
> [ 0.000000] e820: last_pfn = 0x21e600 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
> [ 0.000000] 1 base 000000000 mask F80000000 write-back
> [ 0.000000] 2 base 080000000 mask FC0000000 write-back
> [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
> [ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable
> [ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable
> [ 0.000000] 6 base 100000000 mask F00000000 write-back
> [ 0.000000] 7 base 200000000 mask FE0000000 write-back
> [ 0.000000] 8 base 21F000000 mask FFF000000 uncachable
> [ 0.000000] 9 base 21E800000 mask FFF800000 uncachable
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
> [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 28672
> [ 0.000000] reserving inaccessible SNB gfx pages
> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] BRK [0x01fbf000, 0x01fbffff] PGTABLE
> [ 0.000000] BRK [0x01fc0000, 0x01fc0fff] PGTABLE
> [ 0.000000] BRK [0x01fc1000, 0x01fc1fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x21e400000-0x21e5fffff]
> [ 0.000000] [mem 0x21e400000-0x21e5fffff] page 2M
> [ 0.000000] BRK [0x01fc2000, 0x01fc2fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21e3fffff]
> [ 0.000000] [mem 0x21c000000-0x21e3fffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
> [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
> [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x40200000-0xda99efff]
> [ 0.000000] [mem 0x40200000-0xda7fffff] page 2M
> [ 0.000000] [mem 0xda800000-0xda99efff] page 4k
> [ 0.000000] BRK [0x01fc3000, 0x01fc3fff] PGTABLE
> [ 0.000000] BRK [0x01fc4000, 0x01fc4fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
> [ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
> [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
> [ 0.000000] RAMDISK: [mem 0x371aa000-0x378ccfff]
> [ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 LENOVO)
> [ 0.000000] ACPI: XSDT 00000000daffe120 000AC (v01 LENOVO TP-8A 00001370 PTEC 00000002)
> [ 0.000000] ACPI: FACP 00000000dafe8000 000F4 (v04 LENOVO TP-8A 00001370 PTL 00000002)
> [ 0.000000] ACPI: DSDT 00000000dafeb000 0E48B (v01 LENOVO TP-8A 00001370 INTL 20061109)
> [ 0.000000] ACPI: FACS 00000000daf2d000 00040
> [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 LENOVO TP-8A 00001370 PTEC 00000001)
> [ 0.000000] ACPI: SSDT 00000000daffc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
> [ 0.000000] ACPI: SSDT 00000000daffb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
> [ 0.000000] ACPI: SSDT 00000000daffa000 00797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
> [ 0.000000] ACPI: HPET 00000000dafe7000 00038 (v01 LENOVO TP-8A 00001370 PTL 00000002)
> [ 0.000000] ACPI: APIC 00000000dafe6000 00098 (v01 LENOVO TP-8A 00001370 PTL 00000002)
> [ 0.000000] ACPI: MCFG 00000000dafe5000 0003C (v01 LENOVO TP-8A 00001370 PTL 00000002)
> [ 0.000000] ACPI: ECDT 00000000dafe4000 00052 (v01 LENOVO TP-8A 00001370 PTL 00000002)
> [ 0.000000] ACPI: ASF! 00000000dafea000 000A5 (v32 LENOVO TP-8A 00001370 PTL 00000002)
> [ 0.000000] ACPI: TCPA 00000000dafe3000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
> [ 0.000000] ACPI: SSDT 00000000dafe2000 00A69 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
> [ 0.000000] ACPI: SSDT 00000000dafe1000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
> [ 0.000000] ACPI: DMAR 00000000dafe0000 000E8 (v01 INTEL SNB 00000001 INTL 00000001)
> [ 0.000000] ACPI: UEFI 00000000dafdf000 0003E (v01 LENOVO TP-8A 00001370 PTL 00000002)
> [ 0.000000] ACPI: UEFI 00000000dafde000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
> [ 0.000000] ACPI: UEFI 00000000dafdd000 00292 (v01 LENOVO TP-8A 00001370 PTL 00000002)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021e5fffff]
> [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21e5fffff]
> [ 0.000000] NODE_DATA [mem 0x21e5e5000-0x21e5f8fff]
> [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880215c00000-ffff88021dbfffff] on node 0
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> [ 0.000000] Normal [mem 0x100000000-0x21e5fffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
> [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
> [ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
> [ 0.000000] node 0: [mem 0x40200000-0xda99efff]
> [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
> [ 0.000000] node 0: [mem 0x100000000-0x21e5fffff]
> [ 0.000000] On node 0 totalpages: 2067260
> [ 0.000000] DMA zone: 64 pages used for memmap
> [ 0.000000] DMA zone: 156 pages reserved
> [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 13911 pages used for memmap
> [ 0.000000] DMA32 zone: 890272 pages, LIFO batch:31
> [ 0.000000] Normal zone: 18328 pages used for memmap
> [ 0.000000] Normal zone: 1172992 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 40
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xda99f000-0xdae9efff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd1ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xffd20000-0xffffffff]
> [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
> [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88021e200000 s81216 r8192 d21184 u262144
> [ 0.000000] pcpu-alloc: s81216 r8192 d21184 u262144 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2034801
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.0-mst root=UUID=75d505b0-6e76-4f40-9cbc-0d6e700effd1 ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=True KEYTABLE=us rd.luks=0 LANG=en_US.UTF-8 rhgb quiet drm.debug=0xe
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
> [ 0.000000] Checking aperture...
> [ 0.000000] No AGP bridge found
> [ 0.000000] Memory: 8046708K/8269040K available (6501K kernel code, 933K rwdata, 2768K rodata, 1356K init, 1508K bss, 222332K reserved)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
> [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
> [ 0.000000] Console: colour dummy device 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] hpet clockevent registered
> [ 0.000000] tsc: Fast TSC calibration using PIT
> [ 0.001000] tsc: Detected 2790.991 MHz processor
> [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5581.98 BogoMIPS (lpj=2790991)
> [ 0.000004] pid_max: default: 32768 minimum: 301
> [ 0.000035] Security Framework initialized
> [ 0.000043] SELinux: Initializing.
> [ 0.000050] SELinux: Starting in permissive mode
> [ 0.000508] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
> [ 0.001954] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
> [ 0.002583] Mount-cache hash table entries: 256
> [ 0.002741] Initializing cgroup subsys devices
> [ 0.002743] Initializing cgroup subsys freezer
> [ 0.002744] Initializing cgroup subsys net_cls
> [ 0.002745] Initializing cgroup subsys blkio
> [ 0.002746] Initializing cgroup subsys perf_event
> [ 0.002764] Disabled fast string operations
> [ 0.002765] CPU: Physical Processor ID: 0
> [ 0.002766] CPU: Processor Core ID: 0
> [ 0.002770] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
> [ 0.002772] mce: CPU supports 7 MCE banks
> [ 0.002782] CPU0: Thermal monitoring enabled (TM1)
> [ 0.002790] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
> Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
> tlb_flushall_shift: 5
> [ 0.002854] Freeing SMP alternatives memory: 24K (ffffffff81e3e000 - ffffffff81e44000)
> [ 0.002856] ACPI: Core revision 20130517
> [ 0.008026] ACPI: All ACPI Tables successfully acquired
> [ 0.008870] ftrace: allocating 23578 entries in 93 pages
> [ 0.018224] dmar: Host address width 36
> [ 0.018226] dmar: DRHD base: 0x000000fed90000 flags: 0x0
> [ 0.018231] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
> [ 0.018232] dmar: DRHD base: 0x000000fed91000 flags: 0x1
> [ 0.018236] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
> [ 0.018237] dmar: RMRR base: 0x000000dacd5000 end: 0x000000dacebfff
> [ 0.018238] dmar: RMRR base: 0x000000db800000 end: 0x000000df9fffff
> [ 0.018308] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
> [ 0.018309] HPET id 0 under DRHD base 0xfed91000
> [ 0.018309] HPET id 0 under DRHD base 0xfed91000
> [ 0.018310] HPET id 0 under DRHD base 0xfed91000
> [ 0.018311] HPET id 0 under DRHD base 0xfed91000
> [ 0.018312] HPET id 0 under DRHD base 0xfed91000
> [ 0.018312] HPET id 0 under DRHD base 0xfed91000
> [ 0.018313] HPET id 0 under DRHD base 0xfed91000
> [ 0.018314] HPET id 0 under DRHD base 0xfed91000
> [ 0.018510] Enabled IRQ remapping in x2apic mode
> [ 0.018511] Enabling x2apic
> [ 0.018511] Enabled x2apic
> [ 0.018517] Switched APIC routing to cluster x2apic.
> [ 0.018947] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.028952] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (fam: 06, model: 2a, stepping: 07)
> [ 0.028960] TSC deadline timer enabled
> [ 0.028970] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
> [ 0.028975] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
> [ 0.028977] ... version: 3
> [ 0.028978] ... bit width: 48
> [ 0.028978] ... generic registers: 4
> [ 0.028979] ... value mask: 0000ffffffffffff
> [ 0.028980] ... max period: 0000ffffffffffff
> [ 0.028981] ... fixed-purpose events: 3
> [ 0.028981] ... event mask: 000000070000000f
> [ 0.040977] Disabled fast string operations
> [ 0.043168] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
> [ 0.054269] Disabled fast string operations
> [ 0.067480] Disabled fast string operations
> [ 0.029949] smpboot: Booting Node 0, Processors #1 #2 #3
> [ 0.069600] Brought up 4 CPUs
> [ 0.069603] smpboot: Total of 4 processors activated (22327.92 BogoMIPS)
> [ 0.072607] devtmpfs: initialized
> [ 0.072783] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
> [ 0.073404] atomic64 test passed for x86-64 platform with CX8 and with SSE
> [ 0.073430] RTC time: 18:30:05, date: 09/25/13
> [ 0.073461] NET: Registered protocol family 16
> [ 0.073580] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> [ 0.073582] ACPI: bus type PCI registered
> [ 0.073584] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.073784] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
> [ 0.073787] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
> [ 0.078706] PCI: Using configuration type 1 for base access
> [ 0.079362] bio: create slab <bio-0> at 0
> [ 0.079452] ACPI: Added _OSI(Module Device)
> [ 0.079453] ACPI: Added _OSI(Processor Device)
> [ 0.079454] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.079455] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.080728] ACPI: EC: EC description table is found, configuring boot EC
> [ 0.084195] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> [ 0.097963] ACPI: SSDT 00000000dae8c018 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
> [ 0.098288] ACPI: Dynamic OEM Table Load:
> [ 0.098289] ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
> [ 0.100796] ACPI: SSDT 00000000dae8da98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
> [ 0.101142] ACPI: Dynamic OEM Table Load:
> [ 0.101143] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
> [ 0.103701] ACPI: SSDT 00000000dae8bd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
> [ 0.104019] ACPI: Dynamic OEM Table Load:
> [ 0.104020] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
> [ 0.107090] ACPI: Interpreter enabled
> [ 0.107094] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
> [ 0.107098] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
> [ 0.107108] ACPI: (supports S0 S3 S4 S5)
> [ 0.107109] ACPI: Using IOAPIC for interrupt routing
> [ 0.107125] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 0.107803] ACPI: ACPI Dock Station Driver: 2 docks/bays found
> [ 0.113083] ACPI: Power Resource [PUBS] (on)
> [ 0.116628] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.116695] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.116760] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.116824] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
> [ 0.116888] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
> [ 0.116938] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
> [ 0.117003] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11)
> [ 0.117066] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
> [ 0.117104] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
> [ 0.117194] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
> [ 0.117255] PCI host bridge to bus 0000:00
> [ 0.117258] pci_bus 0000:00: root bus resource [bus 00-fe]
> [ 0.117259] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> [ 0.117261] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> [ 0.117262] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> [ 0.117263] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff]
> [ 0.117265] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
> [ 0.117272] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
> [ 0.117334] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
> [ 0.117343] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
> [ 0.117348] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
> [ 0.117352] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
> [ 0.117430] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
> [ 0.117453] pci 0000:00:16.0: reg 0x10: [mem 0xf2525000-0xf252500f 64bit]
> [ 0.117528] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
> [ 0.117586] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
> [ 0.117607] pci 0000:00:16.3: reg 0x10: [io 0x50b0-0x50b7]
> [ 0.117617] pci 0000:00:16.3: reg 0x14: [mem 0xf252c000-0xf252cfff]
> [ 0.117741] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
> [ 0.117758] pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
> [ 0.117766] pci 0000:00:19.0: reg 0x14: [mem 0xf252b000-0xf252bfff]
> [ 0.117775] pci 0000:00:19.0: reg 0x18: [io 0x5080-0x509f]
> [ 0.117836] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
> [ 0.117864] pci 0000:00:19.0: System wakeup disabled by ACPI
> [ 0.117896] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
> [ 0.117916] pci 0000:00:1a.0: reg 0x10: [mem 0xf252a000-0xf252a3ff]
> [ 0.118003] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
> [ 0.118032] pci 0000:00:1a.0: System wakeup disabled by ACPI
> [ 0.118065] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
> [ 0.118080] pci 0000:00:1b.0: reg 0x10: [mem 0xf2520000-0xf2523fff 64bit]
> [ 0.118147] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.118179] pci 0000:00:1b.0: System wakeup disabled by ACPI
> [ 0.118207] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
> [ 0.118283] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.118340] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
> [ 0.118416] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 0.118471] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
> [ 0.118547] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
> [ 0.118580] pci 0000:00:1c.3: System wakeup disabled by ACPI
> [ 0.118615] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
> [ 0.118743] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> [ 0.118814] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
> [ 0.118834] pci 0000:00:1d.0: reg 0x10: [mem 0xf2529000-0xf25293ff]
> [ 0.118922] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> [ 0.118952] pci 0000:00:1d.0: System wakeup disabled by ACPI
> [ 0.118980] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
> [ 0.119128] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
> [ 0.119145] pci 0000:00:1f.2: reg 0x10: [io 0x50a8-0x50af]
> [ 0.119153] pci 0000:00:1f.2: reg 0x14: [io 0x50bc-0x50bf]
> [ 0.119160] pci 0000:00:1f.2: reg 0x18: [io 0x50a0-0x50a7]
> [ 0.119168] pci 0000:00:1f.2: reg 0x1c: [io 0x50b8-0x50bb]
> [ 0.119176] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
> [ 0.119183] pci 0000:00:1f.2: reg 0x24: [mem 0xf2528000-0xf25287ff]
> [ 0.119227] pci 0000:00:1f.2: PME# supported from D3hot
> [ 0.119274] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
> [ 0.119288] pci 0000:00:1f.3: reg 0x10: [mem 0xf2524000-0xf25240ff 64bit]
> [ 0.119309] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
> [ 0.119414] pci 0000:00:1c.0: PCI bridge to [bus 02]
> [ 0.119510] pci 0000:03:00.0: [8086:4238] type 00 class 0x028000
> [ 0.119554] pci 0000:03:00.0: reg 0x10: [mem 0xf2400000-0xf2401fff 64bit]
> [ 0.119774] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
> [ 0.121652] pci 0000:00:1c.1: PCI bridge to [bus 03]
> [ 0.121667] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
> [ 0.121800] acpiphp: Slot [1] registered
> [ 0.121807] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
> [ 0.121811] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
> [ 0.121815] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff]
> [ 0.121821] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
> [ 0.121973] pci 0000:0d:00.0: [1180:e823] type 00 class 0x088001
> [ 0.121991] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
> [ 0.122017] pci 0000:0d:00.0: reg 0x10: [mem 0xf1401000-0xf14010ff]
> [ 0.122210] pci 0000:0d:00.0: supports D1 D2
> [ 0.122211] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.122334] pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010
> [ 0.122359] pci 0000:0d:00.3: reg 0x10: [mem 0xf1400000-0xf14007ff]
> [ 0.122551] pci 0000:0d:00.3: supports D1 D2
> [ 0.122553] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.124735] pci 0000:00:1c.4: PCI bridge to [bus 0d]
> [ 0.124745] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
> [ 0.124754] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff]
> [ 0.124769] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
> [ 0.124883] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
> [ 0.125007] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
> [ 0.125009] acpi PNP0A08:00: ACPI _OSC control for PCIe not granted, disabling ASPM
> [ 0.125830] ACPI: Enabled 4 GPEs in block 00 to 3F
> [ 0.125840] ACPI: \_SB_.PCI0: notify handler is installed
> [ 0.125875] Found 1 acpi root devices
> [ 0.125923] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
> [ 0.125975] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.125978] vgaarb: loaded
> [ 0.125979] vgaarb: bridge control possible 0000:00:02.0
> [ 0.126029] SCSI subsystem initialized
> [ 0.126031] ACPI: bus type ATA registered
> [ 0.126069] libata version 3.00 loaded.
> [ 0.126085] ACPI: bus type USB registered
> [ 0.126098] usbcore: registered new interface driver usbfs
> [ 0.126104] usbcore: registered new interface driver hub
> [ 0.126121] usbcore: registered new device driver usb
> [ 0.126170] PCI: Using ACPI for IRQ routing
> [ 0.127668] PCI: pci_cache_line_size set to 64 bytes
> [ 0.127802] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
> [ 0.127804] e820: reserve RAM buffer [mem 0xda99f000-0xdbffffff]
> [ 0.127805] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
> [ 0.127806] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
> [ 0.127869] NetLabel: Initializing
> [ 0.127870] NetLabel: domain hash size = 128
> [ 0.127871] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.127880] NetLabel: unlabeled traffic allowed by default
> [ 0.127922] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> [ 0.127926] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
> [ 0.129951] Switched to clocksource hpet
> [ 0.133716] pnp: PnP ACPI init
> [ 0.133729] ACPI: bus type PNP registered
> [ 0.134057] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
> [ 0.134060] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
> [ 0.134061] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
> [ 0.134063] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
> [ 0.134064] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
> [ 0.134066] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
> [ 0.134067] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
> [ 0.134068] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
> [ 0.134070] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
> [ 0.134071] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
> [ 0.134073] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
> [ 0.134074] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
> [ 0.134076] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
> [ 0.134077] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
> [ 0.134079] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
> [ 0.134080] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
> [ 0.134082] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
> [ 0.134085] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.134165] system 00:01: [io 0x0400-0x047f] could not be reserved
> [ 0.134167] system 00:01: [io 0x0500-0x057f] has been reserved
> [ 0.134168] system 00:01: [io 0x0800-0x080f] has been reserved
> [ 0.134170] system 00:01: [io 0x15e0-0x15ef] has been reserved
> [ 0.134171] system 00:01: [io 0x1600-0x167f] has been reserved
> [ 0.134173] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
> [ 0.134176] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
> [ 0.134177] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [ 0.134179] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
> [ 0.134180] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
> [ 0.134182] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
> [ 0.134183] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
> [ 0.134185] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.134228] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
> [ 0.134235] pnp 00:03: [dma 4]
> [ 0.134250] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
> [ 0.134269] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
> [ 0.134297] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
> [ 0.134319] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.134339] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
> [ 0.134362] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
> [ 0.134398] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
> [ 0.134813] pnp: PnP ACPI: found 10 devices
> [ 0.134814] ACPI: bus type PNP unregistered
> [ 0.140891] pci 0000:00:1c.0: PCI bridge to [bus 02]
> [ 0.140903] pci 0000:00:1c.1: PCI bridge to [bus 03]
> [ 0.140908] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
> [ 0.140916] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
> [ 0.140919] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
> [ 0.140924] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff]
> [ 0.140928] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
> [ 0.140934] pci 0000:00:1c.4: PCI bridge to [bus 0d]
> [ 0.140937] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
> [ 0.140944] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff]
> [ 0.140949] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
> [ 0.141122] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 0.141123] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 0.141125] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.141126] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
> [ 0.141127] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
> [ 0.141129] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff]
> [ 0.141130] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
> [ 0.141132] pci_bus 0000:05: resource 1 [mem 0xf1c00000-0xf23fffff]
> [ 0.141133] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
> [ 0.141134] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
> [ 0.141136] pci_bus 0000:0d: resource 1 [mem 0xf1400000-0xf1bfffff]
> [ 0.141137] pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
> [ 0.141160] NET: Registered protocol family 2
> [ 0.141320] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.141495] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.141607] TCP: Hash tables configured (established 65536 bind 65536)
> [ 0.141629] TCP: reno registered
> [ 0.141639] UDP hash table entries: 4096 (order: 5, 131072 bytes)
> [ 0.141666] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
> [ 0.141730] NET: Registered protocol family 1
> [ 0.141740] pci 0000:00:02.0: Boot video device
> [ 0.142014] PCI: CLS 64 bytes, default 64
> [ 0.142047] Unpacking initramfs...
> [ 0.252103] Freeing initrd memory: 7308K (ffff8800371aa000 - ffff8800378cd000)
> [ 0.252112] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 0.252114] software IO TLB [mem 0xd699f000-0xda99f000] (64MB) mapped at [ffff8800d699f000-ffff8800da99efff]
> [ 0.254142] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
> [ 0.254462] audit: initializing netlink socket (disabled)
> [ 0.254473] type=2000 audit(1380133805.244:1): initialized
> [ 0.271432] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.272496] VFS: Disk quotas dquot_6.5.2
> [ 0.272523] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.272802] msgmni has been set to 15730
> [ 0.272844] SELinux: Registering netfilter hooks
> [ 0.273161] alg: No test for stdrng (krng)
> [ 0.273168] NET: Registered protocol family 38
> [ 0.273193] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> [ 0.273220] io scheduler noop registered
> [ 0.273222] io scheduler deadline registered
> [ 0.273240] io scheduler cfq registered (default)
> [ 0.273485] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.273495] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 0.273529] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
> [ 0.273530] vesafb: scrolling: redraw
> [ 0.273531] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
> [ 0.273952] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f00000, using 5120k, total 5120k
> [ 0.352872] Console: switching to colour frame buffer device 160x64
> [ 0.427168] fb0: VESA VGA frame buffer device
> [ 0.427176] intel_idle: MWAIT substates: 0x21120
> [ 0.427177] intel_idle: v0.4 model 0x2A
> [ 0.427178] intel_idle: lapic_timer_reliable_states 0xffffffff
> [ 0.427996] ACPI: AC Adapter [AC] (on-line)
> [ 0.428122] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
> [ 0.428386] ACPI: Lid Switch [LID]
> [ 0.428426] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
> [ 0.428429] ACPI: Sleep Button [SLPB]
> [ 0.428516] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
> [ 0.428518] ACPI: Power Button [PWRF]
> [ 0.428592] ACPI: Requesting acpi_cpufreq
> [ 0.430181] thermal LNXTHERM:00: registered as thermal_zone0
> [ 0.430182] ACPI: Thermal Zone [THM0] (60 C)
> [ 0.430199] GHES: HEST is not enabled!
> [ 0.430259] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 0.451149] 0000:00:16.3: ttyS0 at I/O 0x50b0 (irq = 19) is a 16550A
> [ 0.451452] Non-volatile memory driver v1.3
> [ 0.451453] Linux agpgart interface v0.103
> [ 0.452161] loop: module loaded
> [ 0.452199] ahci 0000:00:1f.2: version 3.0
> [ 0.452266] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
> [ 0.452294] ahci: SSS flag set, parallel bus scan disabled
> [ 0.463069] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
> [ 0.463072] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
> [ 0.463076] ahci 0000:00:1f.2: setting latency timer to 64
> [ 0.463704] ACPI: Battery Slot [BAT0] (battery present)
> [ 0.469332] scsi0 : ahci
> [ 0.469391] scsi1 : ahci
> [ 0.469439] scsi2 : ahci
> [ 0.469487] scsi3 : ahci
> [ 0.469533] scsi4 : ahci
> [ 0.469583] scsi5 : ahci
> [ 0.469643] ata1: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528100 irq 42
> [ 0.469646] ata2: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528180 irq 42
> [ 0.469647] ata3: DUMMY
> [ 0.469649] ata4: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528280 irq 42
> [ 0.469651] ata5: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528300 irq 42
> [ 0.469652] ata6: DUMMY
> [ 0.469706] libphy: Fixed MDIO Bus: probed
> [ 0.469755] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 0.469757] ehci-pci: EHCI PCI platform driver
> [ 0.469830] ehci-pci 0000:00:1a.0: setting latency timer to 64
> [ 0.469838] ehci-pci 0000:00:1a.0: EHCI Host Controller
> [ 0.469877] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
> [ 0.469890] ehci-pci 0000:00:1a.0: debug port 2
> [ 0.473802] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
> [ 0.473816] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf252a000
> [ 0.479055] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> [ 0.479070] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.479071] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.479073] usb usb1: Product: EHCI Host Controller
> [ 0.479074] usb usb1: Manufacturer: Linux 3.11.0-mst ehci_hcd
> [ 0.479075] usb usb1: SerialNumber: 0000:00:1a.0
> [ 0.479156] hub 1-0:1.0: USB hub found
> [ 0.479159] hub 1-0:1.0: 3 ports detected
> [ 0.479280] ehci-pci 0000:00:1d.0: setting latency timer to 64
> [ 0.479285] ehci-pci 0000:00:1d.0: EHCI Host Controller
> [ 0.479326] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
> [ 0.479337] ehci-pci 0000:00:1d.0: debug port 2
> [ 0.483236] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
> [ 0.483247] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2529000
> [ 0.489059] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> [ 0.489068] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.489069] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.489071] usb usb2: Product: EHCI Host Controller
> [ 0.489072] usb usb2: Manufacturer: Linux 3.11.0-mst ehci_hcd
> [ 0.489073] usb usb2: SerialNumber: 0000:00:1d.0
> [ 0.489144] hub 2-0:1.0: USB hub found
> [ 0.489147] hub 2-0:1.0: 3 ports detected
> [ 0.489215] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 0.489217] ohci-pci: OHCI PCI platform driver
> [ 0.489223] uhci_hcd: USB Universal Host Controller Interface driver
> [ 0.489258] usbcore: registered new interface driver usbserial
> [ 0.489263] usbcore: registered new interface driver usbserial_generic
> [ 0.489267] usbserial: USB Serial support registered for generic
> [ 0.489298] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
> [ 0.494993] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 0.494997] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 0.495074] mousedev: PS/2 mouse device common for all mice
> [ 0.495221] rtc_cmos 00:06: RTC can wake from S4
> [ 0.495337] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
> [ 0.495364] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
> [ 0.495404] device-mapper: uevent: version 1.0.3
> [ 0.495450] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
> [ 0.495529] cpuidle: using governor ladder
> [ 0.495608] cpuidle: using governor menu
> [ 0.495884] hidraw: raw HID events driver (C) Jiri Kosina
> [ 0.495941] usbcore: registered new interface driver usbhid
> [ 0.495942] usbhid: USB HID core driver
> [ 0.495957] drop_monitor: Initializing network drop monitor service
> [ 0.496026] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 0.496036] TCP: cubic registered
> [ 0.496037] Initializing XFRM netlink socket
> [ 0.496118] NET: Registered protocol family 10
> [ 0.496256] mip6: Mobile IPv6
> [ 0.496257] NET: Registered protocol family 17
> [ 0.496264] Key type dns_resolver registered
> [ 0.496471] PM: Hibernation image not present or could not be loaded.
> [ 0.496488] registered taskstats version 1
> [ 0.497176] Magic number: 13:285:545
> [ 0.497256] rtc_cmos 00:06: setting system clock to 2013-09-25 18:30:05 UTC (1380133805)
> [ 0.504215] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
> [ 0.774286] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 0.775325] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [ 0.775336] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [ 0.775342] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [ 0.775660] ata1.00: ATA-9: Samsung SSD 840 Series, DXT08B0Q, max UDMA/133
> [ 0.775669] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> [ 0.780451] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [ 0.780463] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [ 0.780470] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [ 0.780797] ata1.00: configured for UDMA/133
> [ 0.781206] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXT0 PQ: 0 ANSI: 5
> [ 0.781239] usb 1-1: new high-speed USB device number 2 using ehci-pci
> [ 0.781623] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> [ 0.781690] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 0.781920] sd 0:0:0:0: [sda] Write Protect is off
> [ 0.781929] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 0.782027] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 0.785081] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
> [ 0.786360] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 0.895901] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
> [ 0.895912] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 0.896504] hub 1-1:1.0: USB hub found
> [ 0.896660] hub 1-1:1.0: 6 ports detected
> [ 1.000321] usb 2-1: new high-speed USB device number 2 using ehci-pci
> [ 1.086373] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.089468] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
> [ 1.089902] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
> [ 1.089913] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [ 1.091651] ata2.00: ATAPI: Optiarc DVD RW AD-7740H, 1.S0, max UDMA/100
> [ 1.095010] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
> [ 1.095446] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
> [ 1.095457] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> [ 1.097249] ata2.00: configured for UDMA/100
> [ 1.098490] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7740H 1.S0 PQ: 0 ANSI: 5
> [ 1.100834] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> [ 1.100843] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 1.101241] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [ 1.101447] sr 1:0:0:0: Attached scsi generic sg1 type 5
> [ 1.114951] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
> [ 1.114962] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 1.115560] hub 2-1:1.0: USB hub found
> [ 1.115724] hub 2-1:1.0: 8 ports detected
> [ 1.190639] usb 1-1.6: new high-speed USB device number 3 using ehci-pci
> [ 1.254378] tsc: Refined TSC clocksource calibration: 2790.932 MHz
> [ 1.282153] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
> [ 1.282164] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 1.282169] usb 1-1.6: Product: Integrated Camera
> [ 1.282174] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
> [ 1.391553] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
> [ 1.406447] ata4: SATA link down (SStatus 0 SControl 300)
> [ 1.477394] usb 2-1.1: New USB device found, idVendor=0557, idProduct=7000
> [ 1.477406] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 1.478061] hub 2-1.1:1.0: USB hub found
> [ 1.478357] hub 2-1.1:1.0: 4 ports detected
> [ 1.639617] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 920262
> [ 1.639635] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
> [ 1.707448] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
> [ 1.711532] ata5: SATA link down (SStatus 0 SControl 300)
> [ 1.714633] Freeing unused kernel memory: 1356K (ffffffff81ceb000 - ffffffff81e3e000)
> [ 1.714640] Write protecting the kernel read-only data: 12288k
> [ 1.724711] Freeing unused kernel memory: 1680K (ffff88000165c000 - ffff880001800000)
> [ 1.732923] Freeing unused kernel memory: 1328K (ffff880001ab4000 - ffff880001c00000)
> [ 1.738644] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
> [ 1.741287] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
> [ 1.741585] systemd[1]: Running in initial RAM disk.
> [ 1.741899] systemd[1]: Set hostname to <robin.redhat.com>.
> [ 1.742667] usb 2-1.1.1: new low-speed USB device number 4 using ehci-pci
> [ 1.757235] systemd[1]: Expecting device dev-disk-by\x2duuid-75d505b0\x2d6e76\x2d4f40\x2d9cbc\x2d0d6e700effd1.device...
> [ 1.757278] systemd[1]: Expecting device dev-disk-by\x2duuid-9a6a5ef2\x2dbee4\x2d4df3\x2dbd74\x2dc9cf2e3628ff.device...
> [ 1.757308] systemd[1]: Starting Timers.
> [ 1.757340] systemd[1]: Reached target Timers.
> [ 1.757539] systemd[1]: Starting udev Kernel Socket.
> [ 1.757624] systemd[1]: Listening on udev Kernel Socket.
> [ 1.757760] systemd[1]: Starting udev Control Socket.
> [ 1.757846] systemd[1]: Listening on udev Control Socket.
> [ 1.757876] systemd[1]: Starting Journal Socket.
> [ 1.757996] systemd[1]: Listening on Journal Socket.
> [ 1.758467] systemd[1]: Started dracut cmdline hook.
> [ 1.758919] systemd[1]: Starting dracut pre-udev hook...
> [ 1.760632] systemd[1]: Started Load Kernel Modules.
> [ 1.760699] systemd[1]: Starting Sockets.
> [ 1.760751] systemd[1]: Reached target Sockets.
> [ 1.760800] systemd[1]: Starting Journal Service...
> [ 1.762053] systemd[1]: Started Journal Service.
> [ 1.762575] systemd[1]: Starting Setup Virtual Console...
> [ 1.762895] systemd[1]: Starting Swap.
> [ 1.762910] systemd[1]: Reached target Swap.
> [ 1.762923] systemd[1]: Starting Local File Systems.
> [ 1.762936] systemd[1]: Reached target Local File Systems.
> [ 1.792945] systemd-udevd[114]: starting version 204
> [ 1.825377] [drm] Initialized drm 1.1.0 20060810
> [ 1.827711] [drm:i915_dump_device_info], i915 device info: gen=6, pciid=0x0126 flags=is_mobile,need_gfx_hws,has_force_wake,has_fbc,has_hotplug,has_bsd_ring,has_blt_ring,has_llc,
> [ 1.827711] [drm] Memory usable by graphics device = 2048M
> [ 1.827712] [drm:i915_gem_gtt_init], GMADR size = 256M
> [ 1.827712] [drm:i915_gem_gtt_init], GTT stolen size = 64M
> [ 1.827713] checking generic (e0000000 500000) vs hw (e0000000 10000000)
> [ 1.827714] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
> [ 1.841963] Console: switching to colour dummy device 80x25
> [ 1.842081] i915 0000:00:02.0: setting latency timer to 64
> [ 1.858493] usb 2-1.1.1: New USB device found, idVendor=045e, idProduct=00db
> [ 1.858504] usb 2-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 1.858511] usb 2-1.1.1: Product: Natural® Ergonomic Keyboard 4000
> [ 1.858516] usb 2-1.1.1: Manufacturer: Microsoft
> [ 1.870126] [drm:intel_detect_pch], Found CougarPoint PCH
> [ 1.870194] [drm:intel_opregion_setup], graphic opregion physical addr: 0xdaef6018
> [ 1.870200] [drm:intel_opregion_setup], Public ACPI methods supported
> [ 1.870201] [drm:intel_opregion_setup], SWSCI supported
> [ 1.870202] [drm:intel_opregion_setup], ASLE supported
> [ 1.870227] i915 0000:00:02.0: irq 43 for MSI/MSI-X
> [ 1.870233] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> [ 1.870234] [drm] Driver supports precise vblank timestamp query.
> [ 1.870235] [drm:init_vbt_defaults], Set default to SSC at 100MHz
> [ 1.870236] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-M d
> [ 1.870238] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0
> [ 1.870239] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
> [ 1.870242] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
> [ 1.870243] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 0 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x8 0xa
> [ 1.870245] [drm:parse_lfp_panel_data], VBT initial LVDS value 30033c
> [ 1.870247] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
> [ 1.870248] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
> [ 1.870249] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
> [ 1.870255] [drm:intel_dsm_pci_probe], no _DSM method for intel device
> [ 1.870258] [drm:i915_gem_init_stolen], found 67108864 bytes of stolen memory at dba00000
> [ 1.870282] [drm:intel_modeset_init], 2 display pipes available.
> [ 1.870290] [drm:intel_shared_dpll_init], 2 shared PLLs initialized
> [ 1.870292] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 1.873247] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/input/input5
> [ 1.873454] microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1.1.1/input0
> [ 1.883527] firewire_ohci 0000:0d:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
> [ 1.884866] [drm:intel_lvds_init], using preferred mode from EDID:
> [ 1.884870] [drm:drm_mode_debug_printmodeline],
> [ 1.884875] Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> [ 1.884878] [drm:intel_lvds_init], detected dual-link lvds configuration
> [ 1.884925] [drm:intel_panel_get_backlight], get backlight PWM = 4437
> [ 1.884928] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> [ 1.884979] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
> [ 1.892458] [drm:intel_sdvo_read_byte], i2c transfer returned -6
> [ 1.892462] [drm:intel_sdvo_init], No SDVO device found on SDVOB
> [ 1.892515] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0
> [ 1.892555] [drm:intel_dp_init_connector], Adding DP connector on port B
> [ 1.892582] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
> [ 1.892654] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.1/input/input6
> [ 1.892755] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1.1.1/input1
> [ 1.895042] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f
> [ 1.895049] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> [ 1.897475] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f
> [ 1.897482] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> [ 1.897552] [drm:intel_dp_init_connector], Adding DP connector on port C
> [ 1.897573] [drm:intel_dp_i2c_init], i2c_init DPDDC-C
> [ 1.900000] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f
> [ 1.900007] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> [ 1.902448] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f
> [ 1.902454] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> [ 1.902477] [drm:intel_dp_init_connector], Adding DP connector on port D
> [ 1.902499] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
> [ 1.904932] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f
> [ 1.904939] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> [ 1.907380] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f
> [ 1.907386] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> [ 1.907407] [drm:ironlake_init_pch_refclk], has_panel 1 has_lvds 1 has_ck505 0
> [ 1.907411] [drm:ironlake_init_pch_refclk], Using SSC on panel
> [ 1.907819] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000]
> [ 1.909741] [drm:init_status_page], render ring hws offset: 0x00000000
> [ 1.911505] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
> [ 1.911576] [drm:init_status_page], bsd ring hws offset: 0x00022000
> [ 1.911918] [drm:init_status_page], blitter ring hws offset: 0x00043000
> [ 1.912242] [drm:create_default_context], Default HW context loaded
> [ 1.912243] [drm:i915_gem_context_init], HW context support initialized
> [ 1.912268] [drm] Wrong MCH_SSKPD value: 0x16040307
> [ 1.912269] [drm] This can cause pipe underruns and display issues.
> [ 1.912270] [drm] Please upgrade your BIOS to fix this.
> [ 1.912279] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
> [ 1.912280] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
> [ 1.912284] [drm:intel_modeset_readout_hw_state], PCH DPLL A hw state readout: refcount 1, on 1
> [ 1.912288] [drm:intel_modeset_readout_hw_state], PCH DPLL B hw state readout: refcount 0, on 0
> [ 1.912292] [drm:intel_modeset_readout_hw_state], [ENCODER:8:LVDS-8] hw state readout: enabled, pipe=0
> [ 1.912295] [drm:intel_modeset_readout_hw_state], [ENCODER:15:DAC-15] hw state readout: disabled, pipe=0
> [ 1.912298] [drm:intel_modeset_readout_hw_state], [ENCODER:16:TMDS-16] hw state readout: disabled, pipe=0
> [ 1.912299] [drm:intel_modeset_readout_hw_state], [ENCODER:20:TMDS-20] hw state readout: disabled, pipe=0
> [ 1.912302] [drm:intel_modeset_readout_hw_state], [ENCODER:22:TMDS-22] hw state readout: disabled, pipe=0
> [ 1.912304] [drm:intel_modeset_readout_hw_state], [ENCODER:24:TMDS-24] hw state readout: disabled, pipe=0
> [ 1.912307] [drm:intel_modeset_readout_hw_state], [ENCODER:26:TMDS-26] hw state readout: disabled, pipe=0
> [ 1.912309] [drm:intel_modeset_readout_hw_state], [ENCODER:28:TMDS-28] hw state readout: disabled, pipe=0
> [ 1.912312] [drm:intel_modeset_readout_hw_state], [CONNECTOR:7:LVDS-1] hw state readout: enabled
> [ 1.912314] [drm:intel_modeset_readout_hw_state], [CONNECTOR:14:VGA-1] hw state readout: disabled
> [ 1.912317] [drm:intel_modeset_readout_hw_state], [CONNECTOR:17:HDMI-A-1] hw state readout: disabled
> [ 1.912319] [drm:intel_modeset_readout_hw_state], [CONNECTOR:21:DP-1] hw state readout: disabled
> [ 1.912322] [drm:intel_modeset_readout_hw_state], [CONNECTOR:23:HDMI-A-2] hw state readout: disabled
> [ 1.912324] [drm:intel_modeset_readout_hw_state], [CONNECTOR:25:HDMI-A-3] hw state readout: disabled
> [ 1.912326] [drm:intel_modeset_readout_hw_state], [CONNECTOR:27:DP-2] hw state readout: disabled
> [ 1.912329] [drm:intel_modeset_readout_hw_state], [CONNECTOR:29:DP-3] hw state readout: disabled
> [ 1.912330] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
> [ 1.912331] [drm:intel_dump_pipe_config], cpu_transcoder: A
> [ 1.912332] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
> [ 1.912333] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 4, gmch_m: 2429201, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
> [ 1.912334] [drm:intel_dump_pipe_config], requested mode:
> [ 1.912335] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1280 0 0 0 1024 0 0 0 0x0 0x0
> [ 1.912337] [drm:intel_dump_pipe_config], adjusted mode:
> [ 1.912338] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
> [ 1.912339] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 1.912340] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x07800438
> [ 1.912341] [drm:intel_dump_pipe_config], ips: 0
> [ 1.912342] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
> [ 1.912342] [drm:intel_dump_pipe_config], cpu_transcoder: B
> [ 1.912343] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
> [ 1.912344] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 1.912345] [drm:intel_dump_pipe_config], requested mode:
> [ 1.912346] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> [ 1.912347] [drm:intel_dump_pipe_config], adjusted mode:
> [ 1.912348] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> [ 1.912349] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 1.912350] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
> [ 1.912350] [drm:intel_dump_pipe_config], ips: 0
> [ 1.912353] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1]
> [ 1.912360] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
> [ 1.912363] [drm:check_encoder_state], [ENCODER:15:DAC-15]
> [ 1.912365] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
> [ 1.912367] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
> [ 1.912369] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
> [ 1.912370] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
> [ 1.912372] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
> [ 1.912374] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
> [ 1.912376] [drm:check_crtc_state], [CRTC:3]
> [ 1.912386] [drm:check_crtc_state], [CRTC:5]
> [ 1.912387] [drm:check_shared_dpll_state], PCH DPLL A
> [ 1.912391] [drm:check_shared_dpll_state], PCH DPLL B
> [ 1.912396] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
> [ 1.912404] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
> [ 1.912413] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
> [ 1.912414] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> [ 1.912415] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
> [ 1.912417] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> [ 1.912420] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
> [ 1.921476] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
> [ 1.921489] [drm:intel_crt_detect], CRT not detected via hotplug
> [ 1.921674] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> [ 1.921683] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 1.921687] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> [ 1.921691] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> [ 1.922105] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 1.922106] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> [ 1.922107] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> [ 1.922109] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
> [ 1.922111] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> [ 1.965897] usb 2-1.1.4: new low-speed USB device number 5 using ehci-pci
> [ 1.972467] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
> [ 1.980498] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> [ 1.980504] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> [ 1.980509] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> [ 1.980514] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> [ 1.980518] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> [ 1.980716] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> [ 1.980724] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> [ 1.980729] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> [ 1.980734] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> [ 1.980901] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> [ 1.980906] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> [ 1.980911] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> [ 1.980915] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> [ 1.980922] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> [ 1.980926] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> [ 1.980931] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> [ 1.980935] [drm:drm_setup_crtcs],
> [ 1.980939] [drm:drm_enable_connectors], connector 7 enabled? yes
> [ 1.980943] [drm:drm_enable_connectors], connector 14 enabled? no
> [ 1.980947] [drm:drm_enable_connectors], connector 17 enabled? no
> [ 1.980950] [drm:drm_enable_connectors], connector 21 enabled? no
> [ 1.980953] [drm:drm_enable_connectors], connector 23 enabled? no
> [ 1.980956] [drm:drm_enable_connectors], connector 25 enabled? no
> [ 1.980960] [drm:drm_enable_connectors], connector 27 enabled? no
> [ 1.980963] [drm:drm_enable_connectors], connector 29 enabled? no
> [ 1.980966] [drm:drm_target_preferred], looking for cmdline mode on connector 7
> [ 1.980970] [drm:drm_target_preferred], looking for preferred mode on connector 7
> [ 1.980974] [drm:drm_target_preferred], found mode 1920x1080
> [ 1.980978] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
> [ 1.980984] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
> [ 1.980994] [drm:i915_gem_object_create_stolen], creating stolen object: size=7e9000
> [ 1.981002] [drm:i915_pages_create_for_stolen], offset=0x0, size=8294400
> [ 1.982540] [drm:intelfb_create], allocated 1920x1080 fb: 0x00072000, bo ffff880211d10c00
> [ 1.982691] fbcon: inteldrmfb (fb0) is primary device
> [ 1.982725] [drm:intel_crtc_set_config], [CRTC:3] [FB:31] #connectors=1 (x y) (0 0)
> [ 1.982726] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
> [ 1.982727] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
> [ 1.982729] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> [ 1.982731] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> [ 1.982732] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> [ 1.982734] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
> [ 1.982735] [drm:connected_sink_compute_bpp], [CONNECTOR:7:LVDS-1] checking for sink bpp constrains
> [ 1.982738] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
> [ 1.982740] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe A, lanes 2
> [ 1.982741] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
> [ 1.982743] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
> [ 1.982743] [drm:intel_dump_pipe_config], cpu_transcoder: A
> [ 1.982744] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
> [ 1.982745] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
> [ 1.982746] [drm:intel_dump_pipe_config], requested mode:
> [ 1.982748] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> [ 1.982749] [drm:intel_dump_pipe_config], adjusted mode:
> [ 1.982750] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> [ 1.982751] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 1.982752] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
> [ 1.982753] [drm:intel_dump_pipe_config], ips: 0
> [ 1.982755] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
> [ 2.047855] usb 2-1.1.4: New USB device found, idVendor=05bc, idProduct=0102
> [ 2.047860] usb 2-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 2.047863] usb 2-1.1.4: Product: USB Optical Mouse
> [ 2.047866] usb 2-1.1.4: Manufacturer: Forward
> [ 2.051524] input: Forward USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.4/2-1.1.4:1.0/input/input7
> [ 2.051896] hid-generic 0003:05BC:0102.0003: input,hidraw2: USB HID v1.10 Mouse [Forward USB Optical Mouse] on usb-0000:00:1d.0-1.1.4/input0
> [ 2.254882] Switched to clocksource tsc
> [ 2.351629] [drm:intel_disable_shared_dpll], disable PCH DPLL A (active 1, on? 1) for crtc 3
> [ 2.351637] [drm:intel_disable_shared_dpll], disabling PCH DPLL A
> [ 2.352054] [drm:intel_update_fbc], no output, disabling
> [ 2.352069] [drm:ironlake_get_refclk], using SSC reference clock of 120 MHz
> [ 2.352123] [drm:intel_get_shared_dpll], CRTC:3 dropping existing PCH DPLL A
> [ 2.352126] [drm:intel_get_shared_dpll], CRTC:3 allocated PCH DPLL A
> [ 2.352129] [drm:intel_get_shared_dpll], using PCH DPLL A for pipe A
> [ 2.352130] [drm:intel_get_shared_dpll], setting up PCH DPLL A
> [ 2.352460] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 7680
> [ 2.352463] [drm:intel_update_fbc], no output, disabling
> [ 2.352470] [drm:intel_crtc_mode_set], [ENCODER:8:LVDS-8] set [MODE:0:1920x1080]
> [ 2.352476] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
> [ 2.352482] [drm:ironlake_check_srwm], watermark 1: display plane 16, fbc lines 3, cursor 6
> [ 2.352486] [drm:ironlake_check_srwm], watermark 2: display plane 20, fbc lines 3, cursor 6
> [ 2.352490] [drm:ironlake_check_srwm], watermark 3: display plane 98, fbc lines 3, cursor 6
> [ 2.384981] firewire_core 0000:0d:00.3: created device fw0: GUID f0def1ffea9a6bff, S400
> [ 2.404696] [drm:ironlake_wait_for_vblank], vblank wait timed out
> [ 2.456613] [drm:ironlake_wait_for_vblank], vblank wait timed out
> [ 2.457436] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x700
> [ 2.457440] [drm:gen6_fdi_link_train], FDI train 1 done.
> [ 2.458099] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
> [ 2.458102] [drm:gen6_fdi_link_train], FDI train 2 done.
> [ 2.458104] [drm:gen6_fdi_link_train], FDI train done.
> [ 2.458108] [drm:ironlake_enable_shared_dpll], enable PCH DPLL A (active 0, on? 0)for crtc 3
> [ 2.458111] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL A
> [ 2.459346] [drm:intel_update_fbc], fbc set to per-chip default
> [ 2.459348] [drm:intel_update_fbc], fbc disabled per module param
> [ 2.856787] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4437
> [ 2.862840] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1]
> [ 2.862861] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
> [ 2.862867] [drm:check_encoder_state], [ENCODER:15:DAC-15]
> [ 2.862872] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
> [ 2.862876] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
> [ 2.862880] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
> [ 2.862884] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
> [ 2.862888] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
> [ 2.862892] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
> [ 2.862897] [drm:check_crtc_state], [CRTC:3]
> [ 2.862917] [drm:check_crtc_state], [CRTC:5]
> [ 2.862920] [drm:check_shared_dpll_state], PCH DPLL A
> [ 2.862926] [drm:check_shared_dpll_state], PCH DPLL B
> [ 2.862937] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
> [ 2.862945] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> [ 2.862957] Console: switching to colour frame buffer device 240x67
> [ 2.862979] [drm:intel_crtc_set_config], [CRTC:3] [FB:31] #connectors=1 (x y) (0 0)
> [ 2.862984] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> [ 2.875013] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [ 2.875017] i915 0000:00:02.0: registered panic notifier
> [ 2.888552] [drm:asle_set_backlight], bclp = 0x80000005
> [ 2.888567] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> [ 2.888572] [drm:intel_panel_actually_set_backlight], set backlight PWM = 85
> [ 2.888577] [drm:asle_set_pwm_freq], PWM freq is not supported
> [ 2.889176] [drm:asle_set_backlight], bclp = 0x800000ff
> [ 2.889188] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> [ 2.889194] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
> [ 2.889198] [drm:asle_set_pwm_freq], PWM freq is not supported
> [ 2.889524] acpi device:01: registered as cooling_device4
> [ 2.889872] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
> [ 2.889918] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
> [ 2.890210] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> [ 2.892375] [drm:i915_driver_open],
> [ 2.892388] [drm:intel_crtc_cursor_set], cursor off
> [ 2.892390] [drm:intel_crtc_set_config], [CRTC:3] [FB:31] #connectors=1 (x y) (0 0)
> [ 2.892393] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> [ 2.892396] [drm:intel_crtc_cursor_set], cursor off
> [ 2.892396] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
> [ 2.892398] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> [ 2.892404] [drm:i915_driver_open],
> [ 2.892408] [drm:intel_crtc_cursor_set], cursor off
> [ 2.892409] [drm:intel_crtc_set_config], [CRTC:3] [FB:31] #connectors=1 (x y) (0 0)
> [ 2.892410] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> [ 2.892411] [drm:intel_crtc_cursor_set], cursor off
> [ 2.892412] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
> [ 2.892413] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> [ 2.892417] [drm:i915_driver_open],
> [ 2.892452] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
> [ 2.892454] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
> [ 2.892458] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> [ 2.892460] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
> [ 2.892468] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
> [ 2.892469] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> [ 2.892472] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
> [ 2.892474] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> [ 2.905530] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> [ 2.905535] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> [ 2.905539] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
> [ 2.905541] [drm:intel_crt_detect], CRT not detected via hotplug
> [ 2.905746] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> [ 2.905760] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 2.905766] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> [ 2.905838] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> [ 2.906244] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 2.906245] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> [ 2.906246] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> [ 2.906248] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
> [ 2.906254] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> [ 2.906255] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> [ 2.906257] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
> [ 2.906258] [drm:intel_crt_detect], CRT not detected via hotplug
> [ 2.906424] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> [ 2.906429] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 2.906433] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> [ 2.906436] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> [ 2.906808] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 2.906810] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> [ 2.906811] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> [ 2.906813] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
> [ 2.906818] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> [ 2.906820] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> [ 2.914713] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> [ 2.914715] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> [ 2.914723] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> [ 2.914724] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> [ 2.922725] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> [ 2.922727] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> [ 2.922734] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> [ 2.922735] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> [ 2.922738] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> [ 2.922739] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> [ 2.922740] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> [ 2.922743] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> [ 2.922744] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> [ 2.922745] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> [ 2.922901] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> [ 2.922903] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> [ 2.922904] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> [ 2.922905] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> [ 2.922906] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> [ 2.923060] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> [ 2.923061] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> [ 2.923062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> [ 2.923064] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> [ 2.923065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> [ 2.923215] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> [ 2.923216] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> [ 2.923217] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> [ 2.923218] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> [ 2.923219] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> [ 2.923368] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> [ 2.923369] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> [ 2.923370] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> [ 2.923372] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> [ 2.923374] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> [ 2.923376] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> [ 2.923377] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> [ 2.923378] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> [ 2.923381] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> [ 2.923382] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> [ 2.923383] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> [ 2.923385] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> [ 2.923387] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> [ 2.923387] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> [ 2.923390] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> [ 2.923401] [drm:drm_mode_addfb], [FB:32]
> [ 2.952510] [drm:drm_mode_addfb], [FB:32]
> [ 2.952528] [drm:drm_mode_setcrtc], [CRTC:3]
> [ 2.952532] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
> [ 2.952533] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
> [ 2.952538] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> [ 2.956869] [drm:ironlake_update_plane], Writing base 0085B000 00000000 0 0 7680
> [ 2.962715] [drm:intel_update_fbc], fbc set to per-chip default
> [ 2.962718] [drm:intel_update_fbc], fbc disabled per module param
> [ 2.971630] [drm:drm_mode_setcrtc], [CRTC:3]
> [ 2.971645] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
> [ 2.971651] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
> [ 2.971662] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> [ 2.986929] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
> [ 3.097390] systemd-journald[93]: Received SIGTERM
> [ 3.717182] [drm:intel_enable_rc6], Sandybridge: deep RC6 disabled
> [ 3.717186] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
> [ 3.720922] [drm:gen6_enable_rps], Overclocking supported. Max: 1300MHz, Overclock max: 1300MHz
> [ 3.805418] SELinux: 2048 avtab hash slots, 95514 rules.
> [ 3.815116] SELinux: 2048 avtab hash slots, 95514 rules.
> [ 4.019838] SELinux: 8 users, 82 roles, 4543 types, 259 bools, 1 sens, 1024 cats
> [ 4.019842] SELinux: 83 classes, 95514 rules
> [ 4.022492] SELinux: Completing initialization.
> [ 4.022495] SELinux: Setting up existing superblocks.
> [ 4.022499] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> [ 4.022501] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> [ 4.022508] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> [ 4.022510] SELinux: initialized (dev proc, type proc), uses genfs_contexts
> [ 4.022515] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 4.022538] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
> [ 4.023039] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> [ 4.023042] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> [ 4.023484] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> [ 4.023492] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
> [ 4.023494] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> [ 4.023506] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
> [ 4.023511] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> [ 4.023517] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> [ 4.023524] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> [ 4.023707] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
> [ 4.023709] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 4.023712] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 4.023752] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 4.023771] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> [ 4.023775] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
> [ 4.023776] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> [ 4.023780] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> [ 4.023793] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> [ 4.023796] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> [ 4.023798] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> [ 4.023800] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> [ 4.023804] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> [ 4.023809] SELinux: initialized (dev sda6, type ext4), uses xattr
> [ 4.041270] type=1403 audit(1380123009.042:2): policy loaded auid=4294967295 ses=4294967295
> [ 4.055557] systemd[1]: Successfully loaded SELinux policy in 401.696ms.
> [ 4.066502] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
> [ 4.081954] systemd[1]: Relabelled /dev and /run in 11.060ms.
> [ 4.110674] LVM: Logical Volume autoactivation enabled.
> [ 4.110679] LVM: Activation generator successfully completed.
> [ 4.181733] systemd-readahead[192]: Failed to mark /: Invalid argument
> [ 4.181896] systemd-readahead[191]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
> [ 4.182921] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> [ 4.200445] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
> [ 4.200959] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 4.202755] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
> [ 4.227484] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
> [ 4.244191] systemd-udevd[228]: starting version 204
> [ 4.439622] EXT4-fs (sda6): re-mounted. Opts: (null)
> [ 4.480305] wmi: Mapper loaded
> [ 4.481095] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
> [ 4.485577] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130517/utaddress-251)
> [ 4.485584] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 4.485588] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130517/utaddress-251)
> [ 4.485591] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 4.485592] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130517/utaddress-251)
> [ 4.485595] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 4.485597] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130517/utaddress-251)
> [ 4.485599] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 4.485601] lpc_ich: Resource conflict(s) found affecting gpio_ich
> [ 4.488722] pps_core: LinuxPPS API ver. 1 registered
> [ 4.488725] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> [ 4.488732] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 4.491855] PTP clock support registered
> [ 4.495807] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
> [ 4.496953] thinkpad_acpi: ThinkPad ACPI Extras v0.24
> [ 4.496956] thinkpad_acpi: http://ibm-acpi.sf.net/
> [ 4.496958] thinkpad_acpi: ThinkPad BIOS 8AET57WW (1.37 ), EC unknown
> [ 4.496959] thinkpad_acpi: Lenovo ThinkPad T520, model 4243BQ9
> [ 4.498434] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
> [ 4.498555] thinkpad_acpi: radio switch found; radios are disabled
> [ 4.498568] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
> [ 4.498569] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
> [ 4.500313] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
> [ 4.501526] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
> [ 4.501694] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
> [ 4.502778] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
> [ 4.517382] sdhci: Secure Digital Host Controller Interface driver
> [ 4.517386] sdhci: Copyright(c) Pierre Ossman
> [ 4.517485] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
> [ 4.525533] input: PC Speaker as /devices/platform/pcspkr/input/input10
> [ 4.529864] Linux video capture interface: v2.00
> [ 4.531095] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 5)
> [ 4.531411] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
> [ 4.536862] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
> [ 4.536865] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
> [ 4.536966] e1000e 0000:00:19.0: setting latency timer to 64
> [ 4.537021] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
> [ 4.537039] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
> [ 4.540827] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26
> [ 4.545094] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26
> [ 4.545558] microcode: CPU0 updated to revision 0x29, date = 2013-06-12
> [ 4.545659] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26
> [ 4.545685] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26
> [ 4.545943] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
> [ 4.545948] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x26
> [ 4.545971] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x26
> [ 4.546263] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
> [ 4.546279] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x26
> [ 4.546305] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x26
> [ 4.546592] microcode: CPU3 updated to revision 0x29, date = 2013-06-12
> [ 4.546595] perf_event_intel: PEBS enabled due to microcode update
> [ 4.546639] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
> [ 4.550982] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
> [ 4.552463] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input11
> [ 4.552580] usbcore: registered new interface driver uvcvideo
> [ 4.552582] USB Video Class driver (1.1.1)
> [ 4.555147] cfg80211: Calling CRDA to update world regulatory domain
> [ 4.571884] Intel(R) Wireless WiFi driver for Linux, in-tree:d
> [ 4.571888] Copyright(c) 2003-2013 Intel Corporation
> [ 4.572018] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
> [ 4.572156] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
> [ 4.629648] iTCO_vendor_support: vendor-support=0
> [ 4.630909] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
> [ 4.630943] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
> [ 4.631247] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 4.640444] cfg80211: World regulatory domain updated:
> [ 4.640448] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> [ 4.640450] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 4.640452] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 4.640454] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
> [ 4.640456] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 4.640457] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 4.735089] e1000e 0000:00:19.0 eth0: registered PHC clock
> [ 4.735104] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:ea:9a:6b
> [ 4.735112] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
> [ 4.735173] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
> [ 4.735523] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
> [ 4.746267] systemd-udevd[259]: renamed network interface eth0 to em1
> [ 4.872601] hda_codec: CX20590: BIOS auto-probing.
> [ 4.873157] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
> [ 4.873166] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 4.873172] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
> [ 4.873176] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0
> [ 4.873180] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs:
> [ 4.873186] ALSA sound/pci/hda/hda_auto_parser.c:410 Mic=0x1b
> [ 4.873190] ALSA sound/pci/hda/hda_auto_parser.c:410 Internal Mic=0x23
> [ 4.873195] ALSA sound/pci/hda/hda_auto_parser.c:410 Dock Mic=0x1a
> [ 4.874287] ALSA sound/pci/hda/patch_conexant.c:3414 hda_codec: Enable sync_write for stable communication
> [ 4.877811] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
> [ 4.879640] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
> [ 4.879655] SELinux: initialized (dev sda3, type ext3), uses xattr
> [ 4.884552] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> [ 4.884667] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
> [ 4.884754] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
> [ 4.884836] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
> [ 4.884910] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
> [ 4.884987] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
> [ 4.885059] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
> [ 4.900808] type=1305 audit(1380123009.901:3): audit_pid=349 old=0 auid=4294967295 ses=4294967295
> subj=system_u:system_r:auditd_t:s0 res=1
> [ 5.735143] systemd-logind[379]: Watching system buttons on /dev/input/event2 (Power Button)
> [ 5.735280] systemd-logind[379]: Watching system buttons on /dev/input/event8 (Video Bus)
> [ 5.735347] systemd-logind[379]: Watching system buttons on /dev/input/event0 (Lid Switch)
> [ 5.735403] systemd-logind[379]: Watching system buttons on /dev/input/event1 (Sleep Button)
> [ 5.735481] systemd-logind[379]: Watching system buttons on /dev/input/event9 (ThinkPad Extra Buttons)
> [ 5.920803] ip6_tables: (C) 2000-2006 Netfilter Core Team
> [ 5.933896] Ebtables v2.0 registered
> [ 5.986358] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> [ 6.042192] Bluetooth: Core ver 2.16
> [ 6.042253] NET: Registered protocol family 31
> [ 6.042255] Bluetooth: HCI device and connection manager initialized
> [ 6.042263] Bluetooth: HCI socket layer initialized
> [ 6.042265] Bluetooth: L2CAP socket layer initialized
> [ 6.042270] Bluetooth: SCO socket layer initialized
> [ 6.057566] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 6.057569] Bluetooth: BNEP filters: protocol multicast
> [ 6.057583] Bluetooth: BNEP socket layer initialized
> [ 6.148298] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
> [ 6.171436] Bridge firewalling registered
> [ 6.248722] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
> [ 6.248982] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
> [ 6.265639] tun: Universal TUN/TAP device driver, 1.6
> [ 6.265643] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> [ 6.295982] device virbr0-nic entered promiscuous mode
> [ 6.393556] [drm:i915_driver_open],
> [ 6.400057] [drm:i915_driver_open],
> [ 6.400067] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
> [ 6.400346] [drm:i915_driver_open],
> [ 6.400603] [drm:i915_driver_open],
> [ 6.400616] [drm:i915_driver_open],
> [ 6.400886] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
> [ 6.400890] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
> [ 6.400933] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> [ 6.400936] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
> [ 6.400947] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
> [ 6.400949] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> [ 6.400952] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
> [ 6.400957] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> [ 6.401174] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> [ 6.401177] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> [ 6.401182] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
> [ 6.401183] [drm:intel_crt_detect], CRT not detected via hotplug
> [ 6.401340] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> [ 6.401343] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 6.401345] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> [ 6.401346] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> [ 6.401722] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 6.401724] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> [ 6.401726] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> [ 6.401728] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
> [ 6.401733] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> [ 6.401735] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> [ 6.401738] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
> [ 6.401739] [drm:intel_crt_detect], CRT not detected via hotplug
> [ 6.401897] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> [ 6.401899] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 6.401901] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> [ 6.401902] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> [ 6.402265] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 6.402267] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> [ 6.402268] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> [ 6.402269] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
> [ 6.402289] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> [ 6.402290] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> [ 6.409646] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> [ 6.409650] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> [ 6.409665] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> [ 6.409671] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> [ 6.417648] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> [ 6.417651] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> [ 6.417694] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> [ 6.417695] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> [ 6.417699] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> [ 6.417700] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> [ 6.417701] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> [ 6.417704] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> [ 6.417714] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> [ 6.417716] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> [ 6.417895] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> [ 6.417899] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> [ 6.417900] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> [ 6.417905] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> [ 6.417906] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> [ 6.418074] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> [ 6.418075] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> [ 6.418076] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> [ 6.418102] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> [ 6.418104] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> [ 6.418261] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> [ 6.418262] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> [ 6.418263] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> [ 6.418265] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> [ 6.418266] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> [ 6.418423] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> [ 6.418424] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> [ 6.418425] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> [ 6.418439] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> [ 6.418440] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> [ 6.418443] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> [ 6.418445] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> [ 6.418446] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> [ 6.418448] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> [ 6.418458] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> [ 6.418459] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> [ 6.418462] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> [ 6.418463] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> [ 6.418464] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> [ 6.418466] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> [ 6.418492] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> [ 6.418494] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
> [ 6.418503] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
> [ 6.418504] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> [ 6.418506] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
> [ 6.418508] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> [ 6.419211] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> [ 6.419214] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> [ 6.419218] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
> [ 6.419219] [drm:intel_crt_detect], CRT not detected via hotplug
> [ 6.419378] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> [ 6.419381] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 6.419382] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> [ 6.419384] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> [ 6.419762] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 6.419764] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> [ 6.419766] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> [ 6.419767] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
> [ 6.419988] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> [ 6.419991] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> [ 6.419994] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
> [ 6.419995] [drm:intel_crt_detect], CRT not detected via hotplug
> [ 6.420152] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> [ 6.420155] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 6.420157] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> [ 6.420158] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> [ 6.420523] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 6.420525] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> [ 6.420527] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> [ 6.420529] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
> [ 6.420552] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> [ 6.420555] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> [ 6.427650] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> [ 6.427654] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> [ 6.427669] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> [ 6.427671] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> [ 6.435654] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> [ 6.435659] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> [ 6.435715] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> [ 6.435719] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> [ 6.435723] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> [ 6.435726] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> [ 6.435728] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> [ 6.435731] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> [ 6.435749] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> [ 6.435751] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> [ 6.435908] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> [ 6.435910] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> [ 6.435911] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> [ 6.435914] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> [ 6.435915] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> [ 6.436072] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> [ 6.436073] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> [ 6.436074] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> [ 6.436091] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> [ 6.436094] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> [ 6.436257] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> [ 6.436260] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> [ 6.436263] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> [ 6.436268] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> [ 6.436270] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> [ 6.436432] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
> [ 6.436436] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> [ 6.436438] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> [ 6.436440] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> [ 6.436468] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> [ 6.436470] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> [ 6.436474] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> [ 6.436477] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> [ 6.436478] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> [ 6.436481] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> [ 6.436496] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> [ 6.436498] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> [ 6.436501] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> [ 6.436503] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> [ 6.436505] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> [ 6.436508] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> [ 6.439518] [drm:asle_set_backlight], bclp = 0x800000ff
> [ 6.439525] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> [ 6.439527] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
> [ 6.439529] [drm:asle_set_pwm_freq], PWM freq is not supported
> [ 6.440077] [drm:asle_set_backlight], bclp = 0x800000ff
> [ 6.440081] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> [ 6.440083] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
> [ 6.440084] [drm:asle_set_pwm_freq], PWM freq is not supported
> [ 6.441311] [drm:drm_mode_addfb], [FB:33]
> [ 6.441353] [drm:drm_mode_setcrtc], [CRTC:3]
> [ 6.441355] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
> [ 6.441357] [drm:intel_crtc_set_config], [CRTC:3] [FB:33] #connectors=1 (x y) (0 0)
> [ 6.441360] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> [ 6.445333] [drm:ironlake_update_plane], Writing base 01044000 00000000 0 0 7680
> [ 6.448640] [drm:intel_update_fbc], fbc set to per-chip default
> [ 6.448644] [drm:intel_update_fbc], fbc disabled per module param
> [ 6.448684] [drm:drm_mode_setcrtc], [CRTC:5]
> [ 6.448686] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
> [ 6.448688] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> [ 8.031174] e1000e: em1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
> [ 8.031189] e1000e 0000:00:19.0 em1: 10/100 speed: disabling TSO
> [ 8.031250] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
> [ 8.421083] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
> [ 8.757041] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input19
> [ 8.925160] virbr0: topology change detected, propagating
> [ 8.925173] virbr0: port 1(virbr0-nic) entered forwarding state
> [ 8.925202] virbr0: port 1(virbr0-nic) entered forwarding state
> [ 8.962042] virbr0: port 1(virbr0-nic) entered disabled state
> [ 10.242281] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> [ 10.242325] SELinux: initialized (dev proc, type proc), uses genfs_contexts
> [ 10.275116] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> [ 10.278068] SELinux: initialized (dev proc, type proc), uses genfs_contexts
> [ 27.729447] [drm:i915_hotplug_work_func], running encoder hotplug functions
> [ 27.729462] [drm:i915_hotplug_work_func], Connector VGA-1 (pin 1) received hotplug event.
> [ 27.729472] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
> [ 27.729477] [drm:intel_crt_detect], CRT detected via hotplug
> [ 27.729481] [drm:intel_hpd_irq_event], [CONNECTOR:14:VGA-1] status updated from 2 to 1
> [ 27.736261] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> [ 27.736274] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
> [ 27.736643] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
> [ 27.736651] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> [ 27.736659] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
> [ 27.736676] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> [ 27.737201] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> [ 27.737208] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> [ 27.737216] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
> [ 27.737220] [drm:intel_crt_detect], CRT detected via hotplug
> [ 27.750371] [drm:drm_edid_to_eld], ELD: no CEA Extension found
> [ 27.750401] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] probed modes :
> [ 27.750406] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
> [ 27.750415] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 27.750421] [drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
> [ 27.750428] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
> [ 27.750434] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
> [ 27.750440] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> [ 27.750446] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
> [ 27.750452] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
> [ 27.750458] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
> [ 27.750464] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> [ 27.750470] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
> [ 27.750476] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
> [ 27.750482] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
> [ 27.750488] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
> [ 27.750494] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
> [ 27.750499] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
> [ 27.750522] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> [ 27.750612] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> [ 27.750617] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> [ 27.758319] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> [ 27.758326] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> [ 27.758337] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> [ 27.758341] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> [ 27.766324] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> [ 27.766333] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> [ 27.766391] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> [ 27.766399] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> [ 27.766406] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> [ 27.766413] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> [ 27.766416] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> [ 27.766422] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> [ 27.766431] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> [ 27.766435] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> [ 27.766677] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> [ 27.766690] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> [ 27.766696] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> [ 27.766713] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> [ 27.766718] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> [ 27.766916] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> [ 27.766922] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> [ 27.766927] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> [ 27.766948] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> [ 27.766952] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> [ 27.767120] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> [ 27.767125] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> [ 27.767129] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> [ 27.767138] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> [ 27.767141] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> [ 27.767339] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> [ 27.767346] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> [ 27.767353] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> [ 27.767374] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> [ 27.767409] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> [ 27.767433] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> [ 27.767460] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> [ 27.767479] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> [ 27.767487] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> [ 27.767499] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> [ 27.767505] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> [ 27.767513] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> [ 27.767524] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> [ 27.767531] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> [ 27.767540] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> [ 33.091303] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> [ 33.091318] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
> [ 33.091347] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
> [ 33.091352] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> [ 33.091361] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
> [ 33.091374] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> [ 33.091933] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> [ 33.091937] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> [ 33.091942] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
> [ 33.091944] [drm:intel_crt_detect], CRT detected via hotplug
> [ 33.105079] [drm:drm_edid_to_eld], ELD: no CEA Extension found
> [ 33.105116] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] probed modes :
> [ 33.105122] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
> [ 33.105130] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 33.105136] [drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
> [ 33.105143] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
> [ 33.105149] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
> [ 33.105155] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> [ 33.105161] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
> [ 33.105167] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
> [ 33.105173] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
> [ 33.105179] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> [ 33.105185] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
> [ 33.105191] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
> [ 33.105197] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
> [ 33.105202] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
> [ 33.105208] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
> [ 33.105214] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
> [ 33.105247] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> [ 33.105344] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> [ 33.105350] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> [ 33.112744] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> [ 33.112754] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> [ 33.112798] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> [ 33.112803] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> [ 33.120747] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> [ 33.120753] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> [ 33.120789] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> [ 33.120794] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> [ 33.120801] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> [ 33.120808] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> [ 33.120811] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> [ 33.120817] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> [ 33.120826] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> [ 33.120830] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> [ 33.121026] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> [ 33.121034] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> [ 33.121038] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> [ 33.121049] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> [ 33.121053] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> [ 33.121262] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> [ 33.121269] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> [ 33.121273] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> [ 33.121289] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> [ 33.121294] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> [ 33.121466] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> [ 33.121471] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> [ 33.121475] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> [ 33.121484] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> [ 33.121488] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> [ 33.121657] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> [ 33.121662] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> [ 33.121666] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> [ 33.121678] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> [ 33.121682] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> [ 33.121688] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> [ 33.121693] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> [ 33.121697] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> [ 33.121702] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> [ 33.121710] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> [ 33.121714] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> [ 33.121740] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> [ 33.121747] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> [ 33.121751] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> [ 33.121756] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> [ 33.640251] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> [ 33.640258] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
> [ 33.640269] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
> [ 33.640271] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> [ 33.640274] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
> [ 33.640279] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> [ 33.640474] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> [ 33.640477] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> [ 33.640481] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
> [ 33.640483] [drm:intel_crt_detect], CRT detected via hotplug
> [ 33.654037] [drm:drm_edid_to_eld], ELD: no CEA Extension found
> [ 33.654049] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] probed modes :
> [ 33.654050] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
> [ 33.654052] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 33.654054] [drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
> [ 33.654056] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
> [ 33.654057] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
> [ 33.654059] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> [ 33.654060] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
> [ 33.654062] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
> [ 33.654063] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
> [ 33.654065] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> [ 33.654066] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
> [ 33.654068] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
> [ 33.654069] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
> [ 33.654071] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
> [ 33.654072] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
> [ 33.654074] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
> [ 33.654089] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> [ 33.654123] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> [ 33.654124] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> [ 33.661890] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> [ 33.661895] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> [ 33.661917] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> [ 33.661920] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> [ 33.669885] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> [ 33.669890] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> [ 33.669904] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> [ 33.669906] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> [ 33.669910] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> [ 33.669911] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> [ 33.669912] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> [ 33.669915] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> [ 33.669917] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> [ 33.669918] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> [ 33.670152] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> [ 33.670161] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> [ 33.670166] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> [ 33.670176] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> [ 33.670180] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> [ 33.670356] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> [ 33.670397] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> [ 33.670398] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> [ 33.670403] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> [ 33.670404] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> [ 33.670553] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> [ 33.670556] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> [ 33.670558] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> [ 33.670562] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> [ 33.670564] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> [ 33.670716] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> [ 33.670717] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> [ 33.670718] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> [ 33.670723] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> [ 33.670724] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> [ 33.670727] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> [ 33.670729] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> [ 33.670730] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> [ 33.670732] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> [ 33.670735] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> [ 33.670736] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> [ 33.670737] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> [ 33.670739] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> [ 33.670739] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> [ 33.670742] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> [ 33.677531] [drm:asle_set_backlight], bclp = 0x800000ff
> [ 33.677537] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> [ 33.677538] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
> [ 33.677539] [drm:asle_set_pwm_freq], PWM freq is not supported
> [ 33.726901] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> [ 33.727110] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> [ 33.727113] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> [ 33.727289] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> [ 33.727290] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> [ 33.727321] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
> [ 33.727323] [drm:intel_crt_detect], CRT detected via hotplug
> [ 33.733627] [drm:asle_set_backlight], bclp = 0x800000ff
> [ 33.733632] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> [ 33.733633] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
> [ 33.733635] [drm:asle_set_pwm_freq], PWM freq is not supported
> [ 33.735261] [drm:asle_set_backlight], bclp = 0x800000ff
> [ 33.735267] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> [ 33.735269] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
> [ 33.735270] [drm:asle_set_pwm_freq], PWM freq is not supported
> [ 34.118911] [drm:asle_set_backlight], bclp = 0x80000003
> [ 34.118929] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> [ 34.118938] [drm:intel_panel_actually_set_backlight], set backlight PWM = 51
> [ 34.118946] [drm:asle_set_pwm_freq], PWM freq is not supported
> [ 34.120083] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
> [ 34.490192] [drm:intel_disable_shared_dpll], disable PCH DPLL A (active 1, on? 1) for crtc 3
> [ 34.490211] [drm:intel_disable_shared_dpll], disabling PCH DPLL A
> [ 34.490631] [drm:intel_update_fbc], no output, disabling
> [ 34.490657] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
> [ 34.490664] [drm:check_encoder_state], [ENCODER:15:DAC-15]
> [ 34.490670] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
> [ 34.490675] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
> [ 34.490681] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
> [ 34.490686] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
> [ 34.490691] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
> [ 34.490697] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
> [ 34.490702] [drm:check_crtc_state], [CRTC:3]
> [ 34.490709] [drm:check_crtc_state], [CRTC:5]
> [ 34.490713] [drm:check_shared_dpll_state], PCH DPLL A
> [ 34.490721] [drm:check_shared_dpll_state], PCH DPLL B
> [ 34.494256] [drm:drm_mode_addfb], [FB:50]
> [ 34.494311] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
> [ 34.494321] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [NOCRTC]
> [ 34.494326] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
> [ 34.494330] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
> [ 34.494336] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
> [ 34.494359] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
> [ 34.494365] [drm:check_encoder_state], [ENCODER:15:DAC-15]
> [ 34.494371] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
> [ 34.494377] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
> [ 34.494382] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
> [ 34.494387] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
> [ 34.494393] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
> [ 34.494398] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
> [ 34.494403] [drm:check_crtc_state], [CRTC:3]
> [ 34.494408] [drm:check_crtc_state], [CRTC:5]
> [ 34.494412] [drm:check_shared_dpll_state], PCH DPLL A
> [ 34.494420] [drm:check_shared_dpll_state], PCH DPLL B
> [ 34.505438] [drm:drm_mode_setcrtc], [CRTC:3]
> [ 34.505447] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
> [ 34.505449] [drm:intel_crtc_set_config], [CRTC:3] [FB:50] #connectors=1 (x y) (0 0)
> [ 34.505451] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
> [ 34.505464] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
> [ 34.505465] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> [ 34.505467] [drm:drm_mode_debug_printmodeline], Modeline 33:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
> [ 34.505468] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
> [ 34.505470] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> [ 34.505471] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
> [ 34.505472] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
> [ 34.505474] [drm:connected_sink_compute_bpp], [CONNECTOR:7:LVDS-1] checking for sink bpp constrains
> [ 34.505477] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
> [ 34.505479] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe A, lanes 2
> [ 34.505480] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
> [ 34.505482] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
> [ 34.505483] [drm:intel_dump_pipe_config], cpu_transcoder: A
> [ 34.505484] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
> [ 34.505485] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
> [ 34.505486] [drm:intel_dump_pipe_config], requested mode:
> [ 34.505487] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
> [ 34.505488] [drm:intel_dump_pipe_config], adjusted mode:
> [ 34.505489] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x0 0x5
> [ 34.505490] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 34.505491] [drm:intel_dump_pipe_config], pch pfit: pos: 0x011d0000, size: 0x05460438
> [ 34.505492] [drm:intel_dump_pipe_config], ips: 0
> [ 34.505495] [drm:ironlake_get_refclk], using SSC reference clock of 120 MHz
> [ 34.505510] [drm:intel_get_shared_dpll], CRTC:3 allocated PCH DPLL A
> [ 34.505511] [drm:intel_get_shared_dpll], using PCH DPLL A for pipe A
> [ 34.505512] [drm:intel_get_shared_dpll], setting up PCH DPLL A
> [ 34.512154] [drm:ironlake_update_plane], Writing base 02057000 00000000 0 0 5120
> [ 34.512181] [drm:intel_update_fbc], no output, disabling
> [ 34.512197] [drm:intel_crtc_mode_set], [ENCODER:8:LVDS-8] set [MODE:0:]
> [ 34.512207] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
> [ 34.512214] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
> [ 34.512220] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
> [ 34.512225] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
> [ 34.564244] [drm:ironlake_wait_for_vblank], vblank wait timed out
> [ 34.616207] [drm:ironlake_wait_for_vblank], vblank wait timed out
> [ 34.617038] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
> [ 34.617045] [drm:gen6_fdi_link_train], FDI train 1 done.
> [ 34.617707] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
> [ 34.617714] [drm:gen6_fdi_link_train], FDI train 2 done.
> [ 34.617716] [drm:gen6_fdi_link_train], FDI train done.
> [ 34.617720] [drm:ironlake_enable_shared_dpll], enable PCH DPLL A (active 0, on? 0)for crtc 3
> [ 34.617726] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL A
> [ 34.618965] [drm:intel_update_fbc], fbc set to per-chip default
> [ 34.618969] [drm:intel_update_fbc], fbc disabled per module param
> [ 35.038327] [drm:intel_panel_actually_set_backlight], set backlight PWM = 51
> [ 35.056348] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1]
> [ 35.056375] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
> [ 35.056382] [drm:check_encoder_state], [ENCODER:15:DAC-15]
> [ 35.056388] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
> [ 35.056393] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
> [ 35.056399] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
> [ 35.056404] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
> [ 35.056409] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
> [ 35.056414] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
> [ 35.056420] [drm:check_crtc_state], [CRTC:3]
> [ 35.056444] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.flags (expected 1, found 0)
> [ 35.056451] ------------[ cut here ]------------
> [ 35.056515] WARNING: CPU: 0 PID: 605 at drivers/gpu/drm/i915/intel_display.c:8286 check_crtc_state+0x5cf/0xa50 [i915]()
> [ 35.056518] pipe state doesn't match!
> [ 35.056521] Modules linked in: ebtable_nat xt_CHECKSUM nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_nat nf_nat_ipv6 ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 tun nf_defrag_ipv6 bridge stp llc iptable_nat nf_nat_ipv4 nf_nat iptable_mangle bnep bluetooth nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_conexant iTCO_wdt iTCO_vendor_support x86_pkg_temp_thermal coretemp kvm_intel kvm snd_hda_intel snd_hda_codec snd_hwdep snd_seq iwlwifi crc32c_intel snd_seq_device ghash_clmulni_intel snd_pcm cfg80211 uvcvideo videobuf2_vmalloc microcode videobuf2_memops videobuf2_core e1000e sdhci_pci videodev pcspkr serio_raw sdhci mmc_core thinkpad_acpi snd_page_alloc i2c_i801 snd_timer ptp snd
> [ 35.056597] pps_core shpchp lpc_ich mfd_core tpm_tis wmi soundcore tpm rfkill tpm_bios uinput binfmt_misc firewire_ohci firewire_core crc_itu_t i915 i2c_algo_bit drm_kms_helper drm i2c_core video
> [ 35.056627] CPU: 0 PID: 605 Comm: X Not tainted 3.11.0-mst #258
> [ 35.056631] Hardware name: LENOVO 4243BQ9/4243BQ9, BIOS 8AET57WW (1.37 ) 04/05/2012
> [ 35.056635] 000000000000205e ffff8801fede7728 ffffffff81647c9b ffff8801fede7768
> [ 35.056644] ffffffff81056d6c ffff880212201478 0000000000000002 ffff8802144d5000
> [ 35.056650] 0000000000000001 ffff880212201478 ffff880212201000 ffff8801fede7848
> [ 35.056657] Call Trace:
> [ 35.056671] [<ffffffff81647c9b>] dump_stack+0x6a/0x77
> [ 35.056683] [<ffffffff81056d6c>] warn_slowpath_common+0x8c/0xc0
> [ 35.056691] [<ffffffff81056e9e>] warn_slowpath_fmt+0x6e/0x70
> [ 35.056724] [<ffffffffa0084385>] ? i915_read32+0x75/0x130 [i915]
> [ 35.056750] [<ffffffffa0084385>] ? i915_read32+0x75/0x130 [i915]
> [ 35.056788] [<ffffffffa00bf275>] ? intel_lvds_get_config+0x45/0xb0 [i915]
> [ 35.056820] [<ffffffffa00ae6ef>] check_crtc_state+0x5cf/0xa50 [i915]
> [ 35.056856] [<ffffffffa00b59e5>] intel_modeset_check_state+0x2e5/0x7c0 [i915]
> [ 35.056887] [<ffffffffa00bc54d>] intel_set_mode+0x2d/0x40 [i915]
> [ 35.056917] [<ffffffffa00bd338>] intel_crtc_set_config+0x878/0x990 [i915]
> [ 35.056952] [<ffffffffa003189b>] drm_mode_set_config_internal+0x5b/0xf0 [drm]
> [ 35.056978] [<ffffffffa0032efe>] drm_mode_setcrtc+0x31e/0x5e0 [drm]
> [ 35.057003] [<ffffffffa002163a>] drm_ioctl+0x3da/0x660 [drm]
> [ 35.057033] [<ffffffffa0032be0>] ? drm_mode_create+0x70/0x70 [drm]
> [ 35.057042] [<ffffffff812963aa>] ? file_has_perm+0xaa/0xb0
> [ 35.057084] [<ffffffffa00ebbc5>] i915_compat_ioctl+0x45/0x50 [i915]
> [ 35.057094] [<ffffffff811e6336>] compat_sys_ioctl+0x106/0x13a0
> [ 35.057104] [<ffffffff811930d8>] ? fsnotify_access+0x68/0x80
> [ 35.057112] [<ffffffff81193958>] ? vfs_read+0xd8/0x130
> [ 35.057119] [<ffffffff810dd9bb>] ? __audit_syscall_exit+0x23b/0x2e0
> [ 35.057129] [<ffffffff81656875>] sysenter_dispatch+0x7/0x1a
> [ 35.057134] ---[ end trace da13b750719727e1 ]---
> [ 35.057137] [drm:intel_dump_pipe_config], [CRTC:3][hw state] config for pipe A
> [ 35.057142] [drm:intel_dump_pipe_config], cpu_transcoder: A
> [ 35.057146] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
> [ 35.057150] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
> [ 35.057155] [drm:intel_dump_pipe_config], requested mode:
> [ 35.057159] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1280 0 0 0 1024 0 0 0 0x0 0x0
> [ 35.057166] [drm:intel_dump_pipe_config], adjusted mode:
> [ 35.057169] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
> [ 35.057175] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 35.057179] [drm:intel_dump_pipe_config], pch pfit: pos: 0x011d0000, size: 0x05460438
> [ 35.057183] [drm:intel_dump_pipe_config], ips: 0
> [ 35.057187] [drm:intel_dump_pipe_config], [CRTC:3][sw state] config for pipe A
> [ 35.057190] [drm:intel_dump_pipe_config], cpu_transcoder: A
> [ 35.057194] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
> [ 35.057197] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
> [ 35.057202] [drm:intel_dump_pipe_config], requested mode:
> [ 35.057206] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
> [ 35.057212] [drm:intel_dump_pipe_config], adjusted mode:
> [ 35.057215] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x0 0x5
> [ 35.057221] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 35.057224] [drm:intel_dump_pipe_config], pch pfit: pos: 0x011d0000, size: 0x05460438
> [ 35.057272] [drm:intel_dump_pipe_config], ips: 0
> [ 35.057277] [drm:check_crtc_state], [CRTC:5]
> [ 35.057282] [drm:check_shared_dpll_state], PCH DPLL A
> [ 35.057290] [drm:check_shared_dpll_state], PCH DPLL B
> [ 35.058635] [drm:asle_set_backlight], bclp = 0x800000ff
> [ 35.058644] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> [ 35.058648] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
> [ 35.058653] [drm:asle_set_pwm_freq], PWM freq is not supported
> [ 35.061950] [drm:drm_mode_setcrtc], [CRTC:5]
> [ 35.061964] [drm:drm_mode_setcrtc], [CONNECTOR:14:VGA-1]
> [ 35.061967] [drm:intel_crtc_set_config], [CRTC:5] [FB:50] #connectors=1 (x y) (0 0)
> [ 35.061973] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
> [ 35.061975] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
> [ 35.061976] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> [ 35.061978] [drm:drm_mode_debug_printmodeline], Modeline 33:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
> [ 35.061980] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
> [ 35.061982] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> [ 35.061984] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:VGA-1] to [CRTC:5]
> [ 35.061985] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
> [ 35.061987] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
> [ 35.061989] [drm:connected_sink_compute_bpp], [CONNECTOR:14:VGA-1] checking for sink bpp constrains
> [ 35.061992] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe B, lanes 2
> [ 35.061993] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
> [ 35.061994] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
> [ 35.061996] [drm:intel_dump_pipe_config], cpu_transcoder: B
> [ 35.061996] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
> [ 35.061997] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
> [ 35.061999] [drm:intel_dump_pipe_config], requested mode:
> [ 35.061999] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
> [ 35.062001] [drm:intel_dump_pipe_config], adjusted mode:
> [ 35.062002] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
> [ 35.062003] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 35.062004] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
> [ 35.062005] [drm:intel_dump_pipe_config], ips: 0
> [ 35.062023] [drm:intel_get_shared_dpll], CRTC:5 allocated PCH DPLL B
> [ 35.062024] [drm:intel_get_shared_dpll], using PCH DPLL B for pipe B
> [ 35.062024] [drm:intel_get_shared_dpll], setting up PCH DPLL B
> [ 35.062355] [drm:ironlake_update_plane], Writing base 02057000 00000000 0 0 5120
> [ 35.062360] [drm:intel_update_fbc], fbc set to per-chip default
> [ 35.062361] [drm:intel_update_fbc], fbc disabled per module param
> [ 35.062365] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
> [ 35.062367] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
> [ 35.062369] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
> [ 35.062371] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
> [ 35.062372] [drm:intel_crtc_mode_set], [ENCODER:15:DAC-15] set [MODE:0:]
> [ 35.062378] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
> [ 35.062379] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
> [ 35.114395] [drm:ironlake_wait_for_vblank], vblank wait timed out
> [ 35.166363] [drm:ironlake_wait_for_vblank], vblank wait timed out
> [ 35.167193] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
> [ 35.167200] [drm:gen6_fdi_link_train], FDI train 1 done.
> [ 35.167862] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
> [ 35.167870] [drm:gen6_fdi_link_train], FDI train 2 done.
> [ 35.167873] [drm:gen6_fdi_link_train], FDI train done.
> [ 35.167877] [drm:ironlake_enable_shared_dpll], enable PCH DPLL B (active 0, on? 0)for crtc 5
> [ 35.167883] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL B
> [ 35.169123] [drm:intel_update_fbc], more than one pipe active, disabling compression
> [ 35.187376] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1]
> [ 35.187393] [drm:intel_connector_check_state], [CONNECTOR:14:VGA-1]
> [ 35.187412] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
> [ 35.187419] [drm:check_encoder_state], [ENCODER:15:DAC-15]
> [ 35.187424] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
> [ 35.187430] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
> [ 35.187436] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
> [ 35.187440] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
> [ 35.187446] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
> [ 35.187451] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
> [ 35.187457] [drm:check_crtc_state], [CRTC:3]
> [ 35.187481] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.flags (expected 1, found 0)
> [ 35.187489] ------------[ cut here ]------------
> [ 35.187552] WARNING: CPU: 0 PID: 605 at drivers/gpu/drm/i915/intel_display.c:8286 check_crtc_state+0x5cf/0xa50 [i915]()
> [ 35.187556] pipe state doesn't match!
> [ 35.187558] Modules linked in: ebtable_nat xt_CHECKSUM nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_nat nf_nat_ipv6 ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 tun nf_defrag_ipv6 bridge stp llc iptable_nat nf_nat_ipv4 nf_nat iptable_mangle bnep bluetooth nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_conexant iTCO_wdt iTCO_vendor_support x86_pkg_temp_thermal coretemp kvm_intel kvm snd_hda_intel snd_hda_codec snd_hwdep snd_seq iwlwifi crc32c_intel snd_seq_device ghash_clmulni_intel snd_pcm cfg80211 uvcvideo videobuf2_vmalloc microcode videobuf2_memops videobuf2_core e1000e sdhci_pci videodev pcspkr serio_raw sdhci mmc_core thinkpad_acpi snd_page_alloc i2c_i801 snd_timer ptp snd
> [ 35.187636] pps_core shpchp lpc_ich mfd_core tpm_tis wmi soundcore tpm rfkill tpm_bios uinput binfmt_misc firewire_ohci firewire_core crc_itu_t i915 i2c_algo_bit drm_kms_helper drm i2c_core video
> [ 35.187666] CPU: 0 PID: 605 Comm: X Tainted: G W 3.11.0-mst #258
> [ 35.187670] Hardware name: LENOVO 4243BQ9/4243BQ9, BIOS 8AET57WW (1.37 ) 04/05/2012
> [ 35.187675] 000000000000205e ffff8801fede7728 ffffffff81647c9b ffff8801fede7768
> [ 35.187683] ffffffff81056d6c ffff880212201478 0000000000000002 ffff8802144d5000
> [ 35.187690] 0000000000000001 ffff880212201478 ffff880212201000 ffff8801fede7848
> [ 35.187697] Call Trace:
> [ 35.187711] [<ffffffff81647c9b>] dump_stack+0x6a/0x77
> [ 35.187723] [<ffffffff81056d6c>] warn_slowpath_common+0x8c/0xc0
> [ 35.187732] [<ffffffff81056e9e>] warn_slowpath_fmt+0x6e/0x70
> [ 35.187764] [<ffffffffa0084385>] ? i915_read32+0x75/0x130 [i915]
> [ 35.187789] [<ffffffffa0084385>] ? i915_read32+0x75/0x130 [i915]
> [ 35.187828] [<ffffffffa00bf275>] ? intel_lvds_get_config+0x45/0xb0 [i915]
> [ 35.187861] [<ffffffffa00ae6ef>] check_crtc_state+0x5cf/0xa50 [i915]
> [ 35.187897] [<ffffffffa00b59e5>] intel_modeset_check_state+0x2e5/0x7c0 [i915]
> [ 35.187929] [<ffffffffa00bc54d>] intel_set_mode+0x2d/0x40 [i915]
> [ 35.187959] [<ffffffffa00bd338>] intel_crtc_set_config+0x878/0x990 [i915]
> [ 35.187993] [<ffffffffa003189b>] drm_mode_set_config_internal+0x5b/0xf0 [drm]
> [ 35.188020] [<ffffffffa0032efe>] drm_mode_setcrtc+0x31e/0x5e0 [drm]
> [ 35.188044] [<ffffffffa002163a>] drm_ioctl+0x3da/0x660 [drm]
> [ 35.188075] [<ffffffffa0032be0>] ? drm_mode_create+0x70/0x70 [drm]
> [ 35.188084] [<ffffffff812963aa>] ? file_has_perm+0xaa/0xb0
> [ 35.188147] [<ffffffffa00ebbc5>] i915_compat_ioctl+0x45/0x50 [i915]
> [ 35.188158] [<ffffffff811e6336>] compat_sys_ioctl+0x106/0x13a0
> [ 35.188168] [<ffffffff811930d8>] ? fsnotify_access+0x68/0x80
> [ 35.188176] [<ffffffff81193958>] ? vfs_read+0xd8/0x130
> [ 35.188183] [<ffffffff810dd9bb>] ? __audit_syscall_exit+0x23b/0x2e0
> [ 35.188193] [<ffffffff81656875>] sysenter_dispatch+0x7/0x1a
> [ 35.188198] ---[ end trace da13b750719727e2 ]---
> [ 35.188202] [drm:intel_dump_pipe_config], [CRTC:3][hw state] config for pipe A
> [ 35.188207] [drm:intel_dump_pipe_config], cpu_transcoder: A
> [ 35.188210] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
> [ 35.188214] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
> [ 35.188220] [drm:intel_dump_pipe_config], requested mode:
> [ 35.188224] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1280 0 0 0 1024 0 0 0 0x0 0x0
> [ 35.188231] [drm:intel_dump_pipe_config], adjusted mode:
> [ 35.188234] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
> [ 35.188239] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 35.188244] [drm:intel_dump_pipe_config], pch pfit: pos: 0x011d0000, size: 0x05460438
> [ 35.188248] [drm:intel_dump_pipe_config], ips: 0
> [ 35.188251] [drm:intel_dump_pipe_config], [CRTC:3][sw state] config for pipe A
> [ 35.188255] [drm:intel_dump_pipe_config], cpu_transcoder: A
> [ 35.188258] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
> [ 35.188262] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
> [ 35.188311] [drm:intel_dump_pipe_config], requested mode:
> [ 35.188314] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
> [ 35.188320] [drm:intel_dump_pipe_config], adjusted mode:
> [ 35.188323] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x0 0x5
> [ 35.188329] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 35.188333] [drm:intel_dump_pipe_config], pch pfit: pos: 0x011d0000, size: 0x05460438
> [ 35.188337] [drm:intel_dump_pipe_config], ips: 0
> [ 35.188340] [drm:check_crtc_state], [CRTC:5]
> [ 35.188363] [drm:check_shared_dpll_state], PCH DPLL A
> [ 35.188395] [drm:check_shared_dpll_state], PCH DPLL B
> [ 36.913619] [drm:asle_set_backlight], bclp = 0x800000ff
> [ 36.913625] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> [ 36.913627] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
> [ 36.913629] [drm:asle_set_pwm_freq], PWM freq is not supported
> [ 36.914907] [drm:asle_set_backlight], bclp = 0x800000ff
> [ 36.914911] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> [ 36.914913] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
> [ 36.914915] [drm:asle_set_pwm_freq], PWM freq is not supported
> [ 42.123964] systemd-journald[213]: File /var/log/journal/2b6e810f801e4f458fa97f9a3b9c8a3e/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
> [ 44.837333] [drm:intel_crtc_cursor_set], cursor off
> [ 44.837350] [drm:intel_crtc_cursor_set], cursor off
> [ 45.027988] [drm:intel_crtc_cursor_set], cursor off
> [ 45.027998] [drm:intel_crtc_cursor_set], cursor off
> [ 45.073569] [drm:intel_crtc_cursor_set], cursor off
> [ 45.073577] [drm:intel_crtc_cursor_set], cursor off
> [ 45.278491] [drm:intel_crtc_cursor_set], cursor off
> [ 45.278504] [drm:intel_crtc_cursor_set], cursor off
> [ 45.542351] [drm:intel_crtc_cursor_set], cursor off
> [ 45.542369] [drm:intel_crtc_cursor_set], cursor off
> [ 57.431075] [drm:intel_crtc_cursor_set], cursor off
> [ 57.431092] [drm:intel_crtc_cursor_set], cursor off
> [ 58.313538] [drm:intel_crtc_cursor_set], cursor off
> [ 58.313555] [drm:intel_crtc_cursor_set], cursor off
> [ 59.545153] [drm:intel_crtc_cursor_set], cursor off
> [ 59.545171] [drm:intel_crtc_cursor_set], cursor off
> [ 67.663884] [drm:intel_crtc_cursor_set], cursor off
> [ 67.663983] [drm:intel_crtc_cursor_set], cursor off
> [ 74.810144] [drm:intel_crtc_cursor_set], cursor off
> [ 74.810159] [drm:intel_crtc_cursor_set], cursor off
> [ 78.400204] [drm:intel_crtc_cursor_set], cursor off
> [ 78.400225] [drm:intel_crtc_cursor_set], cursor off
> [ 79.914106] [drm:intel_crtc_cursor_set], cursor off
> [ 79.914123] [drm:intel_crtc_cursor_set], cursor off
> [ 80.753957] [drm:intel_crtc_cursor_set], cursor off
> [ 80.753975] [drm:intel_crtc_cursor_set], cursor off
> [ 82.211369] [drm:intel_crtc_cursor_set], cursor off
> [ 82.211386] [drm:intel_crtc_cursor_set], cursor off
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Intel-gfx] Fwd: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ]
2013-09-25 15:48 ` [Intel-gfx] " Daniel Vetter
@ 2013-09-29 6:28 ` Michael S. Tsirkin
0 siblings, 0 replies; 13+ messages in thread
From: Michael S. Tsirkin @ 2013-09-29 6:28 UTC (permalink / raw)
To: Dave Airlie, Stephen Rothwell, intel-gfx,
Linux Kernel Mailing List, linux-next, DRI, Sedat Dilek
On Wed, Sep 25, 2013 at 05:48:06PM +0200, Daniel Vetter wrote:
> On Wed, Sep 25, 2013 at 06:34:38PM +0300, Michael S. Tsirkin wrote:
> > On Wed, Sep 25, 2013 at 09:56:52AM +0200, Daniel Vetter wrote:
> > > On Wed, Sep 25, 2013 at 01:17:52PM +1000, Dave Airlie wrote:
> > > > On Mon, Sep 23, 2013 at 12:14 AM, Michael S. Tsirkin <mst@redhat.com> wrote:
> > > > > On Mon, Aug 26, 2013 at 04:05:11PM +0300, Michael S. Tsirkin wrote:
> > > > >> On Wed, Aug 21, 2013 at 11:22:58AM +0200, Sedat Dilek wrote:
> > > > >> > [ Re: [Intel-gfx] i915 producing warnings with kernel 3.11-rc5 ]
> > > > >> >
> > > > >> > Hi,
> > > > >> >
> > > > >> > saw your posting in [1]... can you try the patches below?
> > > > >> > Not sure if they apply.
> > > > >> > Did you try v3.11-rc6(+)... or drm-intel-nightly?
> > > > >> >
> > > > >> > Regards,
> > > > >> > - Sedat -
> > > > >> >
> > > > >> > [1] http://lists.freedesktop.org/archives/intel-gfx/2013-August/032154.html
> > > > >>
> > > > >> Same thing observed with v3.11-rc7.
> > > > >
> > > > > I still see this with 3.11.
> > > > > Following this message, my VGA monitor goes blank and
> > > > > shows an error suggesting a wrong resolution or frequency are set.
> > > > > Anyone?
> > > >
> > > > Daniel, Jesse?
> > > >
> > > > still ongoing I think.
> > >
> > > Yeah, I've dismissed it since the original issue in this thread is
> > > resolved. But it's something else.
> > >
> > > Note to bug reporters: Please don't me-too, but start a new thread/report
> > > - almost every gfx bug is different, even if it superficially looks the
> > > same.
> > >
> > > Michael, can you please boot with drm.debug=0xe, reproduce the problem and
> > > then attach the complete dmesg? Please make sure dmesg contains everything
> > > since boot-up, if not please increase the dmesg buffer size with
> > > log_buf_len=4M.
> >
> > Complete dmesg attached.
> >
> > > Also please test the latest drm-intel-fixes release to check that we
> > > haven't just forgotten to send the patch to stable (there's at least one
> > > flags mismatch fix already in-flight to 3.11 stable kernels).
> > >
> > > Thanks, Daniel
> >
> > Is it included in latest -rc2? It's easier for me to test that.
>
> -rc2 should be good enough for testing - the additional patches in
> -fixes won't affect your issue.
> -Daniel
Either it's gone in -rc2 or it's masked with drm.debug=0xe.
I will keep running with drm.debug=0xe some more, if it does
not trigger anymore, I'll go back to -rc2 without drm.debug=0xe.
> >
> > > --
> > > Daniel Vetter
> > > Software Engineer, Intel Corporation
> > > +41 (0) 79 365 57 48 - http://blog.ffwll.ch
>
> > [ 0.000000] Initializing cgroup subsys cpuset
> > [ 0.000000] Initializing cgroup subsys cpu
> > [ 0.000000] Initializing cgroup subsys cpuacct
> > [ 0.000000] Linux version 3.11.0-mst (mst@robin.redhat.com) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #258 SMP Sun Sep 22 02:49:15 IDT 2013
> > [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.11.0-mst root=UUID=75d505b0-6e76-4f40-9cbc-0d6e700effd1 ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=True KEYTABLE=us rd.luks=0 LANG=en_US.UTF-8 rhgb quiet drm.debug=0xe
> > [ 0.000000] Disabled fast string operations
> > [ 0.000000] e820: BIOS-provided physical RAM map:
> > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
> > [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
> > [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
> > [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da99efff] usable
> > [ 0.000000] BIOS-e820: [mem 0x00000000da99f000-0x00000000dae9efff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
> > [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
> > [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
> > [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
> > [ 0.000000] BIOS-e820: [mem 0x000000021e600000-0x000000021e7fffff] reserved
> > [ 0.000000] NX (Execute Disable) protection: active
> > [ 0.000000] SMBIOS 2.6 present.
> > [ 0.000000] DMI: LENOVO 4243BQ9/4243BQ9, BIOS 8AET57WW (1.37 ) 04/05/2012
> > [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> > [ 0.000000] No AGP bridge found
> > [ 0.000000] e820: last_pfn = 0x21e600 max_arch_pfn = 0x400000000
> > [ 0.000000] MTRR default type: uncachable
> > [ 0.000000] MTRR fixed ranges enabled:
> > [ 0.000000] 00000-9FFFF write-back
> > [ 0.000000] A0000-BFFFF uncachable
> > [ 0.000000] C0000-FFFFF write-protect
> > [ 0.000000] MTRR variable ranges enabled:
> > [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
> > [ 0.000000] 1 base 000000000 mask F80000000 write-back
> > [ 0.000000] 2 base 080000000 mask FC0000000 write-back
> > [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
> > [ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable
> > [ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable
> > [ 0.000000] 6 base 100000000 mask F00000000 write-back
> > [ 0.000000] 7 base 200000000 mask FE0000000 write-back
> > [ 0.000000] 8 base 21F000000 mask FFF000000 uncachable
> > [ 0.000000] 9 base 21E800000 mask FFF800000 uncachable
> > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> > [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
> > [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 28672
> > [ 0.000000] reserving inaccessible SNB gfx pages
> > [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> > [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> > [ 0.000000] BRK [0x01fbf000, 0x01fbffff] PGTABLE
> > [ 0.000000] BRK [0x01fc0000, 0x01fc0fff] PGTABLE
> > [ 0.000000] BRK [0x01fc1000, 0x01fc1fff] PGTABLE
> > [ 0.000000] init_memory_mapping: [mem 0x21e400000-0x21e5fffff]
> > [ 0.000000] [mem 0x21e400000-0x21e5fffff] page 2M
> > [ 0.000000] BRK [0x01fc2000, 0x01fc2fff] PGTABLE
> > [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21e3fffff]
> > [ 0.000000] [mem 0x21c000000-0x21e3fffff] page 2M
> > [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
> > [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
> > [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
> > [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> > [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
> > [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
> > [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
> > [ 0.000000] init_memory_mapping: [mem 0x40200000-0xda99efff]
> > [ 0.000000] [mem 0x40200000-0xda7fffff] page 2M
> > [ 0.000000] [mem 0xda800000-0xda99efff] page 4k
> > [ 0.000000] BRK [0x01fc3000, 0x01fc3fff] PGTABLE
> > [ 0.000000] BRK [0x01fc4000, 0x01fc4fff] PGTABLE
> > [ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
> > [ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k
> > [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
> > [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
> > [ 0.000000] RAMDISK: [mem 0x371aa000-0x378ccfff]
> > [ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 LENOVO)
> > [ 0.000000] ACPI: XSDT 00000000daffe120 000AC (v01 LENOVO TP-8A 00001370 PTEC 00000002)
> > [ 0.000000] ACPI: FACP 00000000dafe8000 000F4 (v04 LENOVO TP-8A 00001370 PTL 00000002)
> > [ 0.000000] ACPI: DSDT 00000000dafeb000 0E48B (v01 LENOVO TP-8A 00001370 INTL 20061109)
> > [ 0.000000] ACPI: FACS 00000000daf2d000 00040
> > [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 LENOVO TP-8A 00001370 PTEC 00000001)
> > [ 0.000000] ACPI: SSDT 00000000daffc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
> > [ 0.000000] ACPI: SSDT 00000000daffb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
> > [ 0.000000] ACPI: SSDT 00000000daffa000 00797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
> > [ 0.000000] ACPI: HPET 00000000dafe7000 00038 (v01 LENOVO TP-8A 00001370 PTL 00000002)
> > [ 0.000000] ACPI: APIC 00000000dafe6000 00098 (v01 LENOVO TP-8A 00001370 PTL 00000002)
> > [ 0.000000] ACPI: MCFG 00000000dafe5000 0003C (v01 LENOVO TP-8A 00001370 PTL 00000002)
> > [ 0.000000] ACPI: ECDT 00000000dafe4000 00052 (v01 LENOVO TP-8A 00001370 PTL 00000002)
> > [ 0.000000] ACPI: ASF! 00000000dafea000 000A5 (v32 LENOVO TP-8A 00001370 PTL 00000002)
> > [ 0.000000] ACPI: TCPA 00000000dafe3000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
> > [ 0.000000] ACPI: SSDT 00000000dafe2000 00A69 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
> > [ 0.000000] ACPI: SSDT 00000000dafe1000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
> > [ 0.000000] ACPI: DMAR 00000000dafe0000 000E8 (v01 INTEL SNB 00000001 INTL 00000001)
> > [ 0.000000] ACPI: UEFI 00000000dafdf000 0003E (v01 LENOVO TP-8A 00001370 PTL 00000002)
> > [ 0.000000] ACPI: UEFI 00000000dafde000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
> > [ 0.000000] ACPI: UEFI 00000000dafdd000 00292 (v01 LENOVO TP-8A 00001370 PTL 00000002)
> > [ 0.000000] ACPI: Local APIC address 0xfee00000
> > [ 0.000000] No NUMA configuration found
> > [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021e5fffff]
> > [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21e5fffff]
> > [ 0.000000] NODE_DATA [mem 0x21e5e5000-0x21e5f8fff]
> > [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880215c00000-ffff88021dbfffff] on node 0
> > [ 0.000000] Zone ranges:
> > [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> > [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> > [ 0.000000] Normal [mem 0x100000000-0x21e5fffff]
> > [ 0.000000] Movable zone start for each node
> > [ 0.000000] Early memory node ranges
> > [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
> > [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
> > [ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
> > [ 0.000000] node 0: [mem 0x40200000-0xda99efff]
> > [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
> > [ 0.000000] node 0: [mem 0x100000000-0x21e5fffff]
> > [ 0.000000] On node 0 totalpages: 2067260
> > [ 0.000000] DMA zone: 64 pages used for memmap
> > [ 0.000000] DMA zone: 156 pages reserved
> > [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
> > [ 0.000000] DMA32 zone: 13911 pages used for memmap
> > [ 0.000000] DMA32 zone: 890272 pages, LIFO batch:31
> > [ 0.000000] Normal zone: 18328 pages used for memmap
> > [ 0.000000] Normal zone: 1172992 pages, LIFO batch:31
> > [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> > [ 0.000000] ACPI: Local APIC address 0xfee00000
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
> > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> > [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> > [ 0.000000] ACPI: IRQ0 used by override.
> > [ 0.000000] ACPI: IRQ2 used by override.
> > [ 0.000000] ACPI: IRQ9 used by override.
> > [ 0.000000] Using ACPI (MADT) for SMP configuration information
> > [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
> > [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
> > [ 0.000000] nr_irqs_gsi: 40
> > [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0xda99f000-0xdae9efff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd1ffff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0xffd20000-0xffffffff]
> > [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
> > [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
> > [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88021e200000 s81216 r8192 d21184 u262144
> > [ 0.000000] pcpu-alloc: s81216 r8192 d21184 u262144 alloc=1*2097152
> > [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2034801
> > [ 0.000000] Policy zone: Normal
> > [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.0-mst root=UUID=75d505b0-6e76-4f40-9cbc-0d6e700effd1 ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=True KEYTABLE=us rd.luks=0 LANG=en_US.UTF-8 rhgb quiet drm.debug=0xe
> > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> > [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
> > [ 0.000000] Checking aperture...
> > [ 0.000000] No AGP bridge found
> > [ 0.000000] Memory: 8046708K/8269040K available (6501K kernel code, 933K rwdata, 2768K rodata, 1356K init, 1508K bss, 222332K reserved)
> > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
> > [ 0.000000] Hierarchical RCU implementation.
> > [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
> > [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
> > [ 0.000000] Console: colour dummy device 80x25
> > [ 0.000000] console [tty0] enabled
> > [ 0.000000] hpet clockevent registered
> > [ 0.000000] tsc: Fast TSC calibration using PIT
> > [ 0.001000] tsc: Detected 2790.991 MHz processor
> > [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5581.98 BogoMIPS (lpj=2790991)
> > [ 0.000004] pid_max: default: 32768 minimum: 301
> > [ 0.000035] Security Framework initialized
> > [ 0.000043] SELinux: Initializing.
> > [ 0.000050] SELinux: Starting in permissive mode
> > [ 0.000508] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
> > [ 0.001954] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
> > [ 0.002583] Mount-cache hash table entries: 256
> > [ 0.002741] Initializing cgroup subsys devices
> > [ 0.002743] Initializing cgroup subsys freezer
> > [ 0.002744] Initializing cgroup subsys net_cls
> > [ 0.002745] Initializing cgroup subsys blkio
> > [ 0.002746] Initializing cgroup subsys perf_event
> > [ 0.002764] Disabled fast string operations
> > [ 0.002765] CPU: Physical Processor ID: 0
> > [ 0.002766] CPU: Processor Core ID: 0
> > [ 0.002770] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> > ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
> > [ 0.002772] mce: CPU supports 7 MCE banks
> > [ 0.002782] CPU0: Thermal monitoring enabled (TM1)
> > [ 0.002790] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
> > Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
> > tlb_flushall_shift: 5
> > [ 0.002854] Freeing SMP alternatives memory: 24K (ffffffff81e3e000 - ffffffff81e44000)
> > [ 0.002856] ACPI: Core revision 20130517
> > [ 0.008026] ACPI: All ACPI Tables successfully acquired
> > [ 0.008870] ftrace: allocating 23578 entries in 93 pages
> > [ 0.018224] dmar: Host address width 36
> > [ 0.018226] dmar: DRHD base: 0x000000fed90000 flags: 0x0
> > [ 0.018231] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
> > [ 0.018232] dmar: DRHD base: 0x000000fed91000 flags: 0x1
> > [ 0.018236] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
> > [ 0.018237] dmar: RMRR base: 0x000000dacd5000 end: 0x000000dacebfff
> > [ 0.018238] dmar: RMRR base: 0x000000db800000 end: 0x000000df9fffff
> > [ 0.018308] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
> > [ 0.018309] HPET id 0 under DRHD base 0xfed91000
> > [ 0.018309] HPET id 0 under DRHD base 0xfed91000
> > [ 0.018310] HPET id 0 under DRHD base 0xfed91000
> > [ 0.018311] HPET id 0 under DRHD base 0xfed91000
> > [ 0.018312] HPET id 0 under DRHD base 0xfed91000
> > [ 0.018312] HPET id 0 under DRHD base 0xfed91000
> > [ 0.018313] HPET id 0 under DRHD base 0xfed91000
> > [ 0.018314] HPET id 0 under DRHD base 0xfed91000
> > [ 0.018510] Enabled IRQ remapping in x2apic mode
> > [ 0.018511] Enabling x2apic
> > [ 0.018511] Enabled x2apic
> > [ 0.018517] Switched APIC routing to cluster x2apic.
> > [ 0.018947] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> > [ 0.028952] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (fam: 06, model: 2a, stepping: 07)
> > [ 0.028960] TSC deadline timer enabled
> > [ 0.028970] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
> > [ 0.028975] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
> > [ 0.028977] ... version: 3
> > [ 0.028978] ... bit width: 48
> > [ 0.028978] ... generic registers: 4
> > [ 0.028979] ... value mask: 0000ffffffffffff
> > [ 0.028980] ... max period: 0000ffffffffffff
> > [ 0.028981] ... fixed-purpose events: 3
> > [ 0.028981] ... event mask: 000000070000000f
> > [ 0.040977] Disabled fast string operations
> > [ 0.043168] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
> > [ 0.054269] Disabled fast string operations
> > [ 0.067480] Disabled fast string operations
> > [ 0.029949] smpboot: Booting Node 0, Processors #1 #2 #3
> > [ 0.069600] Brought up 4 CPUs
> > [ 0.069603] smpboot: Total of 4 processors activated (22327.92 BogoMIPS)
> > [ 0.072607] devtmpfs: initialized
> > [ 0.072783] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
> > [ 0.073404] atomic64 test passed for x86-64 platform with CX8 and with SSE
> > [ 0.073430] RTC time: 18:30:05, date: 09/25/13
> > [ 0.073461] NET: Registered protocol family 16
> > [ 0.073580] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> > [ 0.073582] ACPI: bus type PCI registered
> > [ 0.073584] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> > [ 0.073784] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
> > [ 0.073787] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
> > [ 0.078706] PCI: Using configuration type 1 for base access
> > [ 0.079362] bio: create slab <bio-0> at 0
> > [ 0.079452] ACPI: Added _OSI(Module Device)
> > [ 0.079453] ACPI: Added _OSI(Processor Device)
> > [ 0.079454] ACPI: Added _OSI(3.0 _SCP Extensions)
> > [ 0.079455] ACPI: Added _OSI(Processor Aggregator Device)
> > [ 0.080728] ACPI: EC: EC description table is found, configuring boot EC
> > [ 0.084195] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> > [ 0.097963] ACPI: SSDT 00000000dae8c018 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
> > [ 0.098288] ACPI: Dynamic OEM Table Load:
> > [ 0.098289] ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
> > [ 0.100796] ACPI: SSDT 00000000dae8da98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
> > [ 0.101142] ACPI: Dynamic OEM Table Load:
> > [ 0.101143] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
> > [ 0.103701] ACPI: SSDT 00000000dae8bd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
> > [ 0.104019] ACPI: Dynamic OEM Table Load:
> > [ 0.104020] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
> > [ 0.107090] ACPI: Interpreter enabled
> > [ 0.107094] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
> > [ 0.107098] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
> > [ 0.107108] ACPI: (supports S0 S3 S4 S5)
> > [ 0.107109] ACPI: Using IOAPIC for interrupt routing
> > [ 0.107125] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> > [ 0.107803] ACPI: ACPI Dock Station Driver: 2 docks/bays found
> > [ 0.113083] ACPI: Power Resource [PUBS] (on)
> > [ 0.116628] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
> > [ 0.116695] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
> > [ 0.116760] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
> > [ 0.116824] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
> > [ 0.116888] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
> > [ 0.116938] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
> > [ 0.117003] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11)
> > [ 0.117066] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
> > [ 0.117104] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
> > [ 0.117194] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
> > [ 0.117255] PCI host bridge to bus 0000:00
> > [ 0.117258] pci_bus 0000:00: root bus resource [bus 00-fe]
> > [ 0.117259] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> > [ 0.117261] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> > [ 0.117262] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> > [ 0.117263] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff]
> > [ 0.117265] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
> > [ 0.117272] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
> > [ 0.117334] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
> > [ 0.117343] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
> > [ 0.117348] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
> > [ 0.117352] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
> > [ 0.117430] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
> > [ 0.117453] pci 0000:00:16.0: reg 0x10: [mem 0xf2525000-0xf252500f 64bit]
> > [ 0.117528] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
> > [ 0.117586] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
> > [ 0.117607] pci 0000:00:16.3: reg 0x10: [io 0x50b0-0x50b7]
> > [ 0.117617] pci 0000:00:16.3: reg 0x14: [mem 0xf252c000-0xf252cfff]
> > [ 0.117741] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
> > [ 0.117758] pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
> > [ 0.117766] pci 0000:00:19.0: reg 0x14: [mem 0xf252b000-0xf252bfff]
> > [ 0.117775] pci 0000:00:19.0: reg 0x18: [io 0x5080-0x509f]
> > [ 0.117836] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
> > [ 0.117864] pci 0000:00:19.0: System wakeup disabled by ACPI
> > [ 0.117896] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
> > [ 0.117916] pci 0000:00:1a.0: reg 0x10: [mem 0xf252a000-0xf252a3ff]
> > [ 0.118003] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
> > [ 0.118032] pci 0000:00:1a.0: System wakeup disabled by ACPI
> > [ 0.118065] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
> > [ 0.118080] pci 0000:00:1b.0: reg 0x10: [mem 0xf2520000-0xf2523fff 64bit]
> > [ 0.118147] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> > [ 0.118179] pci 0000:00:1b.0: System wakeup disabled by ACPI
> > [ 0.118207] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
> > [ 0.118283] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> > [ 0.118340] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
> > [ 0.118416] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> > [ 0.118471] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
> > [ 0.118547] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
> > [ 0.118580] pci 0000:00:1c.3: System wakeup disabled by ACPI
> > [ 0.118615] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
> > [ 0.118743] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> > [ 0.118814] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
> > [ 0.118834] pci 0000:00:1d.0: reg 0x10: [mem 0xf2529000-0xf25293ff]
> > [ 0.118922] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> > [ 0.118952] pci 0000:00:1d.0: System wakeup disabled by ACPI
> > [ 0.118980] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
> > [ 0.119128] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
> > [ 0.119145] pci 0000:00:1f.2: reg 0x10: [io 0x50a8-0x50af]
> > [ 0.119153] pci 0000:00:1f.2: reg 0x14: [io 0x50bc-0x50bf]
> > [ 0.119160] pci 0000:00:1f.2: reg 0x18: [io 0x50a0-0x50a7]
> > [ 0.119168] pci 0000:00:1f.2: reg 0x1c: [io 0x50b8-0x50bb]
> > [ 0.119176] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
> > [ 0.119183] pci 0000:00:1f.2: reg 0x24: [mem 0xf2528000-0xf25287ff]
> > [ 0.119227] pci 0000:00:1f.2: PME# supported from D3hot
> > [ 0.119274] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
> > [ 0.119288] pci 0000:00:1f.3: reg 0x10: [mem 0xf2524000-0xf25240ff 64bit]
> > [ 0.119309] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
> > [ 0.119414] pci 0000:00:1c.0: PCI bridge to [bus 02]
> > [ 0.119510] pci 0000:03:00.0: [8086:4238] type 00 class 0x028000
> > [ 0.119554] pci 0000:03:00.0: reg 0x10: [mem 0xf2400000-0xf2401fff 64bit]
> > [ 0.119774] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
> > [ 0.121652] pci 0000:00:1c.1: PCI bridge to [bus 03]
> > [ 0.121667] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
> > [ 0.121800] acpiphp: Slot [1] registered
> > [ 0.121807] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
> > [ 0.121811] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
> > [ 0.121815] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff]
> > [ 0.121821] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
> > [ 0.121973] pci 0000:0d:00.0: [1180:e823] type 00 class 0x088001
> > [ 0.121991] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
> > [ 0.122017] pci 0000:0d:00.0: reg 0x10: [mem 0xf1401000-0xf14010ff]
> > [ 0.122210] pci 0000:0d:00.0: supports D1 D2
> > [ 0.122211] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> > [ 0.122334] pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010
> > [ 0.122359] pci 0000:0d:00.3: reg 0x10: [mem 0xf1400000-0xf14007ff]
> > [ 0.122551] pci 0000:0d:00.3: supports D1 D2
> > [ 0.122553] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
> > [ 0.124735] pci 0000:00:1c.4: PCI bridge to [bus 0d]
> > [ 0.124745] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
> > [ 0.124754] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff]
> > [ 0.124769] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
> > [ 0.124883] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
> > [ 0.125007] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
> > [ 0.125009] acpi PNP0A08:00: ACPI _OSC control for PCIe not granted, disabling ASPM
> > [ 0.125830] ACPI: Enabled 4 GPEs in block 00 to 3F
> > [ 0.125840] ACPI: \_SB_.PCI0: notify handler is installed
> > [ 0.125875] Found 1 acpi root devices
> > [ 0.125923] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
> > [ 0.125975] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> > [ 0.125978] vgaarb: loaded
> > [ 0.125979] vgaarb: bridge control possible 0000:00:02.0
> > [ 0.126029] SCSI subsystem initialized
> > [ 0.126031] ACPI: bus type ATA registered
> > [ 0.126069] libata version 3.00 loaded.
> > [ 0.126085] ACPI: bus type USB registered
> > [ 0.126098] usbcore: registered new interface driver usbfs
> > [ 0.126104] usbcore: registered new interface driver hub
> > [ 0.126121] usbcore: registered new device driver usb
> > [ 0.126170] PCI: Using ACPI for IRQ routing
> > [ 0.127668] PCI: pci_cache_line_size set to 64 bytes
> > [ 0.127802] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
> > [ 0.127804] e820: reserve RAM buffer [mem 0xda99f000-0xdbffffff]
> > [ 0.127805] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
> > [ 0.127806] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
> > [ 0.127869] NetLabel: Initializing
> > [ 0.127870] NetLabel: domain hash size = 128
> > [ 0.127871] NetLabel: protocols = UNLABELED CIPSOv4
> > [ 0.127880] NetLabel: unlabeled traffic allowed by default
> > [ 0.127922] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> > [ 0.127926] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
> > [ 0.129951] Switched to clocksource hpet
> > [ 0.133716] pnp: PnP ACPI init
> > [ 0.133729] ACPI: bus type PNP registered
> > [ 0.134057] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
> > [ 0.134060] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
> > [ 0.134061] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
> > [ 0.134063] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
> > [ 0.134064] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
> > [ 0.134066] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
> > [ 0.134067] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
> > [ 0.134068] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
> > [ 0.134070] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
> > [ 0.134071] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
> > [ 0.134073] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
> > [ 0.134074] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
> > [ 0.134076] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
> > [ 0.134077] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
> > [ 0.134079] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
> > [ 0.134080] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
> > [ 0.134082] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
> > [ 0.134085] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
> > [ 0.134165] system 00:01: [io 0x0400-0x047f] could not be reserved
> > [ 0.134167] system 00:01: [io 0x0500-0x057f] has been reserved
> > [ 0.134168] system 00:01: [io 0x0800-0x080f] has been reserved
> > [ 0.134170] system 00:01: [io 0x15e0-0x15ef] has been reserved
> > [ 0.134171] system 00:01: [io 0x1600-0x167f] has been reserved
> > [ 0.134173] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
> > [ 0.134176] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
> > [ 0.134177] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
> > [ 0.134179] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
> > [ 0.134180] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
> > [ 0.134182] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
> > [ 0.134183] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
> > [ 0.134185] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.134228] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
> > [ 0.134235] pnp 00:03: [dma 4]
> > [ 0.134250] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
> > [ 0.134269] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
> > [ 0.134297] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
> > [ 0.134319] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
> > [ 0.134339] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
> > [ 0.134362] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
> > [ 0.134398] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
> > [ 0.134813] pnp: PnP ACPI: found 10 devices
> > [ 0.134814] ACPI: bus type PNP unregistered
> > [ 0.140891] pci 0000:00:1c.0: PCI bridge to [bus 02]
> > [ 0.140903] pci 0000:00:1c.1: PCI bridge to [bus 03]
> > [ 0.140908] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
> > [ 0.140916] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
> > [ 0.140919] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
> > [ 0.140924] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff]
> > [ 0.140928] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
> > [ 0.140934] pci 0000:00:1c.4: PCI bridge to [bus 0d]
> > [ 0.140937] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
> > [ 0.140944] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff]
> > [ 0.140949] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
> > [ 0.141122] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> > [ 0.141123] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> > [ 0.141125] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> > [ 0.141126] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
> > [ 0.141127] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
> > [ 0.141129] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff]
> > [ 0.141130] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
> > [ 0.141132] pci_bus 0000:05: resource 1 [mem 0xf1c00000-0xf23fffff]
> > [ 0.141133] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
> > [ 0.141134] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
> > [ 0.141136] pci_bus 0000:0d: resource 1 [mem 0xf1400000-0xf1bfffff]
> > [ 0.141137] pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
> > [ 0.141160] NET: Registered protocol family 2
> > [ 0.141320] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
> > [ 0.141495] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> > [ 0.141607] TCP: Hash tables configured (established 65536 bind 65536)
> > [ 0.141629] TCP: reno registered
> > [ 0.141639] UDP hash table entries: 4096 (order: 5, 131072 bytes)
> > [ 0.141666] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
> > [ 0.141730] NET: Registered protocol family 1
> > [ 0.141740] pci 0000:00:02.0: Boot video device
> > [ 0.142014] PCI: CLS 64 bytes, default 64
> > [ 0.142047] Unpacking initramfs...
> > [ 0.252103] Freeing initrd memory: 7308K (ffff8800371aa000 - ffff8800378cd000)
> > [ 0.252112] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> > [ 0.252114] software IO TLB [mem 0xd699f000-0xda99f000] (64MB) mapped at [ffff8800d699f000-ffff8800da99efff]
> > [ 0.254142] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
> > [ 0.254462] audit: initializing netlink socket (disabled)
> > [ 0.254473] type=2000 audit(1380133805.244:1): initialized
> > [ 0.271432] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> > [ 0.272496] VFS: Disk quotas dquot_6.5.2
> > [ 0.272523] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> > [ 0.272802] msgmni has been set to 15730
> > [ 0.272844] SELinux: Registering netfilter hooks
> > [ 0.273161] alg: No test for stdrng (krng)
> > [ 0.273168] NET: Registered protocol family 38
> > [ 0.273193] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> > [ 0.273220] io scheduler noop registered
> > [ 0.273222] io scheduler deadline registered
> > [ 0.273240] io scheduler cfq registered (default)
> > [ 0.273485] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> > [ 0.273495] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> > [ 0.273529] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
> > [ 0.273530] vesafb: scrolling: redraw
> > [ 0.273531] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
> > [ 0.273952] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f00000, using 5120k, total 5120k
> > [ 0.352872] Console: switching to colour frame buffer device 160x64
> > [ 0.427168] fb0: VESA VGA frame buffer device
> > [ 0.427176] intel_idle: MWAIT substates: 0x21120
> > [ 0.427177] intel_idle: v0.4 model 0x2A
> > [ 0.427178] intel_idle: lapic_timer_reliable_states 0xffffffff
> > [ 0.427996] ACPI: AC Adapter [AC] (on-line)
> > [ 0.428122] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
> > [ 0.428386] ACPI: Lid Switch [LID]
> > [ 0.428426] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
> > [ 0.428429] ACPI: Sleep Button [SLPB]
> > [ 0.428516] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
> > [ 0.428518] ACPI: Power Button [PWRF]
> > [ 0.428592] ACPI: Requesting acpi_cpufreq
> > [ 0.430181] thermal LNXTHERM:00: registered as thermal_zone0
> > [ 0.430182] ACPI: Thermal Zone [THM0] (60 C)
> > [ 0.430199] GHES: HEST is not enabled!
> > [ 0.430259] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> > [ 0.451149] 0000:00:16.3: ttyS0 at I/O 0x50b0 (irq = 19) is a 16550A
> > [ 0.451452] Non-volatile memory driver v1.3
> > [ 0.451453] Linux agpgart interface v0.103
> > [ 0.452161] loop: module loaded
> > [ 0.452199] ahci 0000:00:1f.2: version 3.0
> > [ 0.452266] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
> > [ 0.452294] ahci: SSS flag set, parallel bus scan disabled
> > [ 0.463069] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
> > [ 0.463072] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
> > [ 0.463076] ahci 0000:00:1f.2: setting latency timer to 64
> > [ 0.463704] ACPI: Battery Slot [BAT0] (battery present)
> > [ 0.469332] scsi0 : ahci
> > [ 0.469391] scsi1 : ahci
> > [ 0.469439] scsi2 : ahci
> > [ 0.469487] scsi3 : ahci
> > [ 0.469533] scsi4 : ahci
> > [ 0.469583] scsi5 : ahci
> > [ 0.469643] ata1: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528100 irq 42
> > [ 0.469646] ata2: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528180 irq 42
> > [ 0.469647] ata3: DUMMY
> > [ 0.469649] ata4: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528280 irq 42
> > [ 0.469651] ata5: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528300 irq 42
> > [ 0.469652] ata6: DUMMY
> > [ 0.469706] libphy: Fixed MDIO Bus: probed
> > [ 0.469755] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > [ 0.469757] ehci-pci: EHCI PCI platform driver
> > [ 0.469830] ehci-pci 0000:00:1a.0: setting latency timer to 64
> > [ 0.469838] ehci-pci 0000:00:1a.0: EHCI Host Controller
> > [ 0.469877] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
> > [ 0.469890] ehci-pci 0000:00:1a.0: debug port 2
> > [ 0.473802] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
> > [ 0.473816] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf252a000
> > [ 0.479055] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> > [ 0.479070] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> > [ 0.479071] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > [ 0.479073] usb usb1: Product: EHCI Host Controller
> > [ 0.479074] usb usb1: Manufacturer: Linux 3.11.0-mst ehci_hcd
> > [ 0.479075] usb usb1: SerialNumber: 0000:00:1a.0
> > [ 0.479156] hub 1-0:1.0: USB hub found
> > [ 0.479159] hub 1-0:1.0: 3 ports detected
> > [ 0.479280] ehci-pci 0000:00:1d.0: setting latency timer to 64
> > [ 0.479285] ehci-pci 0000:00:1d.0: EHCI Host Controller
> > [ 0.479326] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
> > [ 0.479337] ehci-pci 0000:00:1d.0: debug port 2
> > [ 0.483236] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
> > [ 0.483247] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2529000
> > [ 0.489059] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> > [ 0.489068] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> > [ 0.489069] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > [ 0.489071] usb usb2: Product: EHCI Host Controller
> > [ 0.489072] usb usb2: Manufacturer: Linux 3.11.0-mst ehci_hcd
> > [ 0.489073] usb usb2: SerialNumber: 0000:00:1d.0
> > [ 0.489144] hub 2-0:1.0: USB hub found
> > [ 0.489147] hub 2-0:1.0: 3 ports detected
> > [ 0.489215] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> > [ 0.489217] ohci-pci: OHCI PCI platform driver
> > [ 0.489223] uhci_hcd: USB Universal Host Controller Interface driver
> > [ 0.489258] usbcore: registered new interface driver usbserial
> > [ 0.489263] usbcore: registered new interface driver usbserial_generic
> > [ 0.489267] usbserial: USB Serial support registered for generic
> > [ 0.489298] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
> > [ 0.494993] serio: i8042 KBD port at 0x60,0x64 irq 1
> > [ 0.494997] serio: i8042 AUX port at 0x60,0x64 irq 12
> > [ 0.495074] mousedev: PS/2 mouse device common for all mice
> > [ 0.495221] rtc_cmos 00:06: RTC can wake from S4
> > [ 0.495337] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
> > [ 0.495364] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
> > [ 0.495404] device-mapper: uevent: version 1.0.3
> > [ 0.495450] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
> > [ 0.495529] cpuidle: using governor ladder
> > [ 0.495608] cpuidle: using governor menu
> > [ 0.495884] hidraw: raw HID events driver (C) Jiri Kosina
> > [ 0.495941] usbcore: registered new interface driver usbhid
> > [ 0.495942] usbhid: USB HID core driver
> > [ 0.495957] drop_monitor: Initializing network drop monitor service
> > [ 0.496026] ip_tables: (C) 2000-2006 Netfilter Core Team
> > [ 0.496036] TCP: cubic registered
> > [ 0.496037] Initializing XFRM netlink socket
> > [ 0.496118] NET: Registered protocol family 10
> > [ 0.496256] mip6: Mobile IPv6
> > [ 0.496257] NET: Registered protocol family 17
> > [ 0.496264] Key type dns_resolver registered
> > [ 0.496471] PM: Hibernation image not present or could not be loaded.
> > [ 0.496488] registered taskstats version 1
> > [ 0.497176] Magic number: 13:285:545
> > [ 0.497256] rtc_cmos 00:06: setting system clock to 2013-09-25 18:30:05 UTC (1380133805)
> > [ 0.504215] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
> > [ 0.774286] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> > [ 0.775325] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> > [ 0.775336] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> > [ 0.775342] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> > [ 0.775660] ata1.00: ATA-9: Samsung SSD 840 Series, DXT08B0Q, max UDMA/133
> > [ 0.775669] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> > [ 0.780451] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> > [ 0.780463] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> > [ 0.780470] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> > [ 0.780797] ata1.00: configured for UDMA/133
> > [ 0.781206] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXT0 PQ: 0 ANSI: 5
> > [ 0.781239] usb 1-1: new high-speed USB device number 2 using ehci-pci
> > [ 0.781623] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> > [ 0.781690] sd 0:0:0:0: Attached scsi generic sg0 type 0
> > [ 0.781920] sd 0:0:0:0: [sda] Write Protect is off
> > [ 0.781929] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > [ 0.782027] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > [ 0.785081] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
> > [ 0.786360] sd 0:0:0:0: [sda] Attached SCSI disk
> > [ 0.895901] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
> > [ 0.895912] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> > [ 0.896504] hub 1-1:1.0: USB hub found
> > [ 0.896660] hub 1-1:1.0: 6 ports detected
> > [ 1.000321] usb 2-1: new high-speed USB device number 2 using ehci-pci
> > [ 1.086373] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> > [ 1.089468] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
> > [ 1.089902] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
> > [ 1.089913] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> > [ 1.091651] ata2.00: ATAPI: Optiarc DVD RW AD-7740H, 1.S0, max UDMA/100
> > [ 1.095010] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
> > [ 1.095446] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
> > [ 1.095457] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> > [ 1.097249] ata2.00: configured for UDMA/100
> > [ 1.098490] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7740H 1.S0 PQ: 0 ANSI: 5
> > [ 1.100834] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> > [ 1.100843] cdrom: Uniform CD-ROM driver Revision: 3.20
> > [ 1.101241] sr 1:0:0:0: Attached scsi CD-ROM sr0
> > [ 1.101447] sr 1:0:0:0: Attached scsi generic sg1 type 5
> > [ 1.114951] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
> > [ 1.114962] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> > [ 1.115560] hub 2-1:1.0: USB hub found
> > [ 1.115724] hub 2-1:1.0: 8 ports detected
> > [ 1.190639] usb 1-1.6: new high-speed USB device number 3 using ehci-pci
> > [ 1.254378] tsc: Refined TSC clocksource calibration: 2790.932 MHz
> > [ 1.282153] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
> > [ 1.282164] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > [ 1.282169] usb 1-1.6: Product: Integrated Camera
> > [ 1.282174] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
> > [ 1.391553] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
> > [ 1.406447] ata4: SATA link down (SStatus 0 SControl 300)
> > [ 1.477394] usb 2-1.1: New USB device found, idVendor=0557, idProduct=7000
> > [ 1.477406] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> > [ 1.478061] hub 2-1.1:1.0: USB hub found
> > [ 1.478357] hub 2-1.1:1.0: 4 ports detected
> > [ 1.639617] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 920262
> > [ 1.639635] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
> > [ 1.707448] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
> > [ 1.711532] ata5: SATA link down (SStatus 0 SControl 300)
> > [ 1.714633] Freeing unused kernel memory: 1356K (ffffffff81ceb000 - ffffffff81e3e000)
> > [ 1.714640] Write protecting the kernel read-only data: 12288k
> > [ 1.724711] Freeing unused kernel memory: 1680K (ffff88000165c000 - ffff880001800000)
> > [ 1.732923] Freeing unused kernel memory: 1328K (ffff880001ab4000 - ffff880001c00000)
> > [ 1.738644] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
> > [ 1.741287] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
> > [ 1.741585] systemd[1]: Running in initial RAM disk.
> > [ 1.741899] systemd[1]: Set hostname to <robin.redhat.com>.
> > [ 1.742667] usb 2-1.1.1: new low-speed USB device number 4 using ehci-pci
> > [ 1.757235] systemd[1]: Expecting device dev-disk-by\x2duuid-75d505b0\x2d6e76\x2d4f40\x2d9cbc\x2d0d6e700effd1.device...
> > [ 1.757278] systemd[1]: Expecting device dev-disk-by\x2duuid-9a6a5ef2\x2dbee4\x2d4df3\x2dbd74\x2dc9cf2e3628ff.device...
> > [ 1.757308] systemd[1]: Starting Timers.
> > [ 1.757340] systemd[1]: Reached target Timers.
> > [ 1.757539] systemd[1]: Starting udev Kernel Socket.
> > [ 1.757624] systemd[1]: Listening on udev Kernel Socket.
> > [ 1.757760] systemd[1]: Starting udev Control Socket.
> > [ 1.757846] systemd[1]: Listening on udev Control Socket.
> > [ 1.757876] systemd[1]: Starting Journal Socket.
> > [ 1.757996] systemd[1]: Listening on Journal Socket.
> > [ 1.758467] systemd[1]: Started dracut cmdline hook.
> > [ 1.758919] systemd[1]: Starting dracut pre-udev hook...
> > [ 1.760632] systemd[1]: Started Load Kernel Modules.
> > [ 1.760699] systemd[1]: Starting Sockets.
> > [ 1.760751] systemd[1]: Reached target Sockets.
> > [ 1.760800] systemd[1]: Starting Journal Service...
> > [ 1.762053] systemd[1]: Started Journal Service.
> > [ 1.762575] systemd[1]: Starting Setup Virtual Console...
> > [ 1.762895] systemd[1]: Starting Swap.
> > [ 1.762910] systemd[1]: Reached target Swap.
> > [ 1.762923] systemd[1]: Starting Local File Systems.
> > [ 1.762936] systemd[1]: Reached target Local File Systems.
> > [ 1.792945] systemd-udevd[114]: starting version 204
> > [ 1.825377] [drm] Initialized drm 1.1.0 20060810
> > [ 1.827711] [drm:i915_dump_device_info], i915 device info: gen=6, pciid=0x0126 flags=is_mobile,need_gfx_hws,has_force_wake,has_fbc,has_hotplug,has_bsd_ring,has_blt_ring,has_llc,
> > [ 1.827711] [drm] Memory usable by graphics device = 2048M
> > [ 1.827712] [drm:i915_gem_gtt_init], GMADR size = 256M
> > [ 1.827712] [drm:i915_gem_gtt_init], GTT stolen size = 64M
> > [ 1.827713] checking generic (e0000000 500000) vs hw (e0000000 10000000)
> > [ 1.827714] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
> > [ 1.841963] Console: switching to colour dummy device 80x25
> > [ 1.842081] i915 0000:00:02.0: setting latency timer to 64
> > [ 1.858493] usb 2-1.1.1: New USB device found, idVendor=045e, idProduct=00db
> > [ 1.858504] usb 2-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > [ 1.858511] usb 2-1.1.1: Product: Natural® Ergonomic Keyboard 4000
> > [ 1.858516] usb 2-1.1.1: Manufacturer: Microsoft
> > [ 1.870126] [drm:intel_detect_pch], Found CougarPoint PCH
> > [ 1.870194] [drm:intel_opregion_setup], graphic opregion physical addr: 0xdaef6018
> > [ 1.870200] [drm:intel_opregion_setup], Public ACPI methods supported
> > [ 1.870201] [drm:intel_opregion_setup], SWSCI supported
> > [ 1.870202] [drm:intel_opregion_setup], ASLE supported
> > [ 1.870227] i915 0000:00:02.0: irq 43 for MSI/MSI-X
> > [ 1.870233] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> > [ 1.870234] [drm] Driver supports precise vblank timestamp query.
> > [ 1.870235] [drm:init_vbt_defaults], Set default to SSC at 100MHz
> > [ 1.870236] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-M d
> > [ 1.870238] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0
> > [ 1.870239] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
> > [ 1.870242] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
> > [ 1.870243] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 0 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x8 0xa
> > [ 1.870245] [drm:parse_lfp_panel_data], VBT initial LVDS value 30033c
> > [ 1.870247] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
> > [ 1.870248] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
> > [ 1.870249] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
> > [ 1.870255] [drm:intel_dsm_pci_probe], no _DSM method for intel device
> > [ 1.870258] [drm:i915_gem_init_stolen], found 67108864 bytes of stolen memory at dba00000
> > [ 1.870282] [drm:intel_modeset_init], 2 display pipes available.
> > [ 1.870290] [drm:intel_shared_dpll_init], 2 shared PLLs initialized
> > [ 1.870292] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> > [ 1.873247] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/input/input5
> > [ 1.873454] microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1.1.1/input0
> > [ 1.883527] firewire_ohci 0000:0d:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
> > [ 1.884866] [drm:intel_lvds_init], using preferred mode from EDID:
> > [ 1.884870] [drm:drm_mode_debug_printmodeline],
> > [ 1.884875] Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> > [ 1.884878] [drm:intel_lvds_init], detected dual-link lvds configuration
> > [ 1.884925] [drm:intel_panel_get_backlight], get backlight PWM = 4437
> > [ 1.884928] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> > [ 1.884979] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
> > [ 1.892458] [drm:intel_sdvo_read_byte], i2c transfer returned -6
> > [ 1.892462] [drm:intel_sdvo_init], No SDVO device found on SDVOB
> > [ 1.892515] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0
> > [ 1.892555] [drm:intel_dp_init_connector], Adding DP connector on port B
> > [ 1.892582] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
> > [ 1.892654] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.1/input/input6
> > [ 1.892755] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1.1.1/input1
> > [ 1.895042] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f
> > [ 1.895049] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> > [ 1.897475] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f
> > [ 1.897482] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> > [ 1.897552] [drm:intel_dp_init_connector], Adding DP connector on port C
> > [ 1.897573] [drm:intel_dp_i2c_init], i2c_init DPDDC-C
> > [ 1.900000] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f
> > [ 1.900007] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> > [ 1.902448] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f
> > [ 1.902454] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> > [ 1.902477] [drm:intel_dp_init_connector], Adding DP connector on port D
> > [ 1.902499] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
> > [ 1.904932] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f
> > [ 1.904939] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> > [ 1.907380] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7143003f
> > [ 1.907386] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> > [ 1.907407] [drm:ironlake_init_pch_refclk], has_panel 1 has_lvds 1 has_ck505 0
> > [ 1.907411] [drm:ironlake_init_pch_refclk], Using SSC on panel
> > [ 1.907819] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000]
> > [ 1.909741] [drm:init_status_page], render ring hws offset: 0x00000000
> > [ 1.911505] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
> > [ 1.911576] [drm:init_status_page], bsd ring hws offset: 0x00022000
> > [ 1.911918] [drm:init_status_page], blitter ring hws offset: 0x00043000
> > [ 1.912242] [drm:create_default_context], Default HW context loaded
> > [ 1.912243] [drm:i915_gem_context_init], HW context support initialized
> > [ 1.912268] [drm] Wrong MCH_SSKPD value: 0x16040307
> > [ 1.912269] [drm] This can cause pipe underruns and display issues.
> > [ 1.912270] [drm] Please upgrade your BIOS to fix this.
> > [ 1.912279] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
> > [ 1.912280] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
> > [ 1.912284] [drm:intel_modeset_readout_hw_state], PCH DPLL A hw state readout: refcount 1, on 1
> > [ 1.912288] [drm:intel_modeset_readout_hw_state], PCH DPLL B hw state readout: refcount 0, on 0
> > [ 1.912292] [drm:intel_modeset_readout_hw_state], [ENCODER:8:LVDS-8] hw state readout: enabled, pipe=0
> > [ 1.912295] [drm:intel_modeset_readout_hw_state], [ENCODER:15:DAC-15] hw state readout: disabled, pipe=0
> > [ 1.912298] [drm:intel_modeset_readout_hw_state], [ENCODER:16:TMDS-16] hw state readout: disabled, pipe=0
> > [ 1.912299] [drm:intel_modeset_readout_hw_state], [ENCODER:20:TMDS-20] hw state readout: disabled, pipe=0
> > [ 1.912302] [drm:intel_modeset_readout_hw_state], [ENCODER:22:TMDS-22] hw state readout: disabled, pipe=0
> > [ 1.912304] [drm:intel_modeset_readout_hw_state], [ENCODER:24:TMDS-24] hw state readout: disabled, pipe=0
> > [ 1.912307] [drm:intel_modeset_readout_hw_state], [ENCODER:26:TMDS-26] hw state readout: disabled, pipe=0
> > [ 1.912309] [drm:intel_modeset_readout_hw_state], [ENCODER:28:TMDS-28] hw state readout: disabled, pipe=0
> > [ 1.912312] [drm:intel_modeset_readout_hw_state], [CONNECTOR:7:LVDS-1] hw state readout: enabled
> > [ 1.912314] [drm:intel_modeset_readout_hw_state], [CONNECTOR:14:VGA-1] hw state readout: disabled
> > [ 1.912317] [drm:intel_modeset_readout_hw_state], [CONNECTOR:17:HDMI-A-1] hw state readout: disabled
> > [ 1.912319] [drm:intel_modeset_readout_hw_state], [CONNECTOR:21:DP-1] hw state readout: disabled
> > [ 1.912322] [drm:intel_modeset_readout_hw_state], [CONNECTOR:23:HDMI-A-2] hw state readout: disabled
> > [ 1.912324] [drm:intel_modeset_readout_hw_state], [CONNECTOR:25:HDMI-A-3] hw state readout: disabled
> > [ 1.912326] [drm:intel_modeset_readout_hw_state], [CONNECTOR:27:DP-2] hw state readout: disabled
> > [ 1.912329] [drm:intel_modeset_readout_hw_state], [CONNECTOR:29:DP-3] hw state readout: disabled
> > [ 1.912330] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
> > [ 1.912331] [drm:intel_dump_pipe_config], cpu_transcoder: A
> > [ 1.912332] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
> > [ 1.912333] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 4, gmch_m: 2429201, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
> > [ 1.912334] [drm:intel_dump_pipe_config], requested mode:
> > [ 1.912335] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1280 0 0 0 1024 0 0 0 0x0 0x0
> > [ 1.912337] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 1.912338] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
> > [ 1.912339] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 1.912340] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x07800438
> > [ 1.912341] [drm:intel_dump_pipe_config], ips: 0
> > [ 1.912342] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
> > [ 1.912342] [drm:intel_dump_pipe_config], cpu_transcoder: B
> > [ 1.912343] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
> > [ 1.912344] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 1.912345] [drm:intel_dump_pipe_config], requested mode:
> > [ 1.912346] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> > [ 1.912347] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 1.912348] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> > [ 1.912349] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 1.912350] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
> > [ 1.912350] [drm:intel_dump_pipe_config], ips: 0
> > [ 1.912353] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1]
> > [ 1.912360] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
> > [ 1.912363] [drm:check_encoder_state], [ENCODER:15:DAC-15]
> > [ 1.912365] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
> > [ 1.912367] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
> > [ 1.912369] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
> > [ 1.912370] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
> > [ 1.912372] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
> > [ 1.912374] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
> > [ 1.912376] [drm:check_crtc_state], [CRTC:3]
> > [ 1.912386] [drm:check_crtc_state], [CRTC:5]
> > [ 1.912387] [drm:check_shared_dpll_state], PCH DPLL A
> > [ 1.912391] [drm:check_shared_dpll_state], PCH DPLL B
> > [ 1.912396] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
> > [ 1.912404] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
> > [ 1.912413] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
> > [ 1.912414] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> > [ 1.912415] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
> > [ 1.912417] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> > [ 1.912420] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
> > [ 1.921476] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
> > [ 1.921489] [drm:intel_crt_detect], CRT not detected via hotplug
> > [ 1.921674] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> > [ 1.921683] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 1.921687] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> > [ 1.921691] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> > [ 1.922105] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 1.922106] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> > [ 1.922107] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> > [ 1.922109] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
> > [ 1.922111] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> > [ 1.965897] usb 2-1.1.4: new low-speed USB device number 5 using ehci-pci
> > [ 1.972467] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
> > [ 1.980498] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> > [ 1.980504] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> > [ 1.980509] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> > [ 1.980514] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> > [ 1.980518] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> > [ 1.980716] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> > [ 1.980724] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> > [ 1.980729] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> > [ 1.980734] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> > [ 1.980901] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> > [ 1.980906] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> > [ 1.980911] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> > [ 1.980915] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> > [ 1.980922] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> > [ 1.980926] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> > [ 1.980931] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> > [ 1.980935] [drm:drm_setup_crtcs],
> > [ 1.980939] [drm:drm_enable_connectors], connector 7 enabled? yes
> > [ 1.980943] [drm:drm_enable_connectors], connector 14 enabled? no
> > [ 1.980947] [drm:drm_enable_connectors], connector 17 enabled? no
> > [ 1.980950] [drm:drm_enable_connectors], connector 21 enabled? no
> > [ 1.980953] [drm:drm_enable_connectors], connector 23 enabled? no
> > [ 1.980956] [drm:drm_enable_connectors], connector 25 enabled? no
> > [ 1.980960] [drm:drm_enable_connectors], connector 27 enabled? no
> > [ 1.980963] [drm:drm_enable_connectors], connector 29 enabled? no
> > [ 1.980966] [drm:drm_target_preferred], looking for cmdline mode on connector 7
> > [ 1.980970] [drm:drm_target_preferred], looking for preferred mode on connector 7
> > [ 1.980974] [drm:drm_target_preferred], found mode 1920x1080
> > [ 1.980978] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
> > [ 1.980984] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
> > [ 1.980994] [drm:i915_gem_object_create_stolen], creating stolen object: size=7e9000
> > [ 1.981002] [drm:i915_pages_create_for_stolen], offset=0x0, size=8294400
> > [ 1.982540] [drm:intelfb_create], allocated 1920x1080 fb: 0x00072000, bo ffff880211d10c00
> > [ 1.982691] fbcon: inteldrmfb (fb0) is primary device
> > [ 1.982725] [drm:intel_crtc_set_config], [CRTC:3] [FB:31] #connectors=1 (x y) (0 0)
> > [ 1.982726] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
> > [ 1.982727] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
> > [ 1.982729] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> > [ 1.982731] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> > [ 1.982732] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> > [ 1.982734] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
> > [ 1.982735] [drm:connected_sink_compute_bpp], [CONNECTOR:7:LVDS-1] checking for sink bpp constrains
> > [ 1.982738] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
> > [ 1.982740] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe A, lanes 2
> > [ 1.982741] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
> > [ 1.982743] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
> > [ 1.982743] [drm:intel_dump_pipe_config], cpu_transcoder: A
> > [ 1.982744] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
> > [ 1.982745] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
> > [ 1.982746] [drm:intel_dump_pipe_config], requested mode:
> > [ 1.982748] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> > [ 1.982749] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 1.982750] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> > [ 1.982751] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 1.982752] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
> > [ 1.982753] [drm:intel_dump_pipe_config], ips: 0
> > [ 1.982755] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
> > [ 2.047855] usb 2-1.1.4: New USB device found, idVendor=05bc, idProduct=0102
> > [ 2.047860] usb 2-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > [ 2.047863] usb 2-1.1.4: Product: USB Optical Mouse
> > [ 2.047866] usb 2-1.1.4: Manufacturer: Forward
> > [ 2.051524] input: Forward USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.4/2-1.1.4:1.0/input/input7
> > [ 2.051896] hid-generic 0003:05BC:0102.0003: input,hidraw2: USB HID v1.10 Mouse [Forward USB Optical Mouse] on usb-0000:00:1d.0-1.1.4/input0
> > [ 2.254882] Switched to clocksource tsc
> > [ 2.351629] [drm:intel_disable_shared_dpll], disable PCH DPLL A (active 1, on? 1) for crtc 3
> > [ 2.351637] [drm:intel_disable_shared_dpll], disabling PCH DPLL A
> > [ 2.352054] [drm:intel_update_fbc], no output, disabling
> > [ 2.352069] [drm:ironlake_get_refclk], using SSC reference clock of 120 MHz
> > [ 2.352123] [drm:intel_get_shared_dpll], CRTC:3 dropping existing PCH DPLL A
> > [ 2.352126] [drm:intel_get_shared_dpll], CRTC:3 allocated PCH DPLL A
> > [ 2.352129] [drm:intel_get_shared_dpll], using PCH DPLL A for pipe A
> > [ 2.352130] [drm:intel_get_shared_dpll], setting up PCH DPLL A
> > [ 2.352460] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 7680
> > [ 2.352463] [drm:intel_update_fbc], no output, disabling
> > [ 2.352470] [drm:intel_crtc_mode_set], [ENCODER:8:LVDS-8] set [MODE:0:1920x1080]
> > [ 2.352476] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
> > [ 2.352482] [drm:ironlake_check_srwm], watermark 1: display plane 16, fbc lines 3, cursor 6
> > [ 2.352486] [drm:ironlake_check_srwm], watermark 2: display plane 20, fbc lines 3, cursor 6
> > [ 2.352490] [drm:ironlake_check_srwm], watermark 3: display plane 98, fbc lines 3, cursor 6
> > [ 2.384981] firewire_core 0000:0d:00.3: created device fw0: GUID f0def1ffea9a6bff, S400
> > [ 2.404696] [drm:ironlake_wait_for_vblank], vblank wait timed out
> > [ 2.456613] [drm:ironlake_wait_for_vblank], vblank wait timed out
> > [ 2.457436] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x700
> > [ 2.457440] [drm:gen6_fdi_link_train], FDI train 1 done.
> > [ 2.458099] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
> > [ 2.458102] [drm:gen6_fdi_link_train], FDI train 2 done.
> > [ 2.458104] [drm:gen6_fdi_link_train], FDI train done.
> > [ 2.458108] [drm:ironlake_enable_shared_dpll], enable PCH DPLL A (active 0, on? 0)for crtc 3
> > [ 2.458111] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL A
> > [ 2.459346] [drm:intel_update_fbc], fbc set to per-chip default
> > [ 2.459348] [drm:intel_update_fbc], fbc disabled per module param
> > [ 2.856787] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4437
> > [ 2.862840] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1]
> > [ 2.862861] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
> > [ 2.862867] [drm:check_encoder_state], [ENCODER:15:DAC-15]
> > [ 2.862872] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
> > [ 2.862876] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
> > [ 2.862880] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
> > [ 2.862884] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
> > [ 2.862888] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
> > [ 2.862892] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
> > [ 2.862897] [drm:check_crtc_state], [CRTC:3]
> > [ 2.862917] [drm:check_crtc_state], [CRTC:5]
> > [ 2.862920] [drm:check_shared_dpll_state], PCH DPLL A
> > [ 2.862926] [drm:check_shared_dpll_state], PCH DPLL B
> > [ 2.862937] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
> > [ 2.862945] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> > [ 2.862957] Console: switching to colour frame buffer device 240x67
> > [ 2.862979] [drm:intel_crtc_set_config], [CRTC:3] [FB:31] #connectors=1 (x y) (0 0)
> > [ 2.862984] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> > [ 2.875013] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> > [ 2.875017] i915 0000:00:02.0: registered panic notifier
> > [ 2.888552] [drm:asle_set_backlight], bclp = 0x80000005
> > [ 2.888567] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> > [ 2.888572] [drm:intel_panel_actually_set_backlight], set backlight PWM = 85
> > [ 2.888577] [drm:asle_set_pwm_freq], PWM freq is not supported
> > [ 2.889176] [drm:asle_set_backlight], bclp = 0x800000ff
> > [ 2.889188] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> > [ 2.889194] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
> > [ 2.889198] [drm:asle_set_pwm_freq], PWM freq is not supported
> > [ 2.889524] acpi device:01: registered as cooling_device4
> > [ 2.889872] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
> > [ 2.889918] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
> > [ 2.890210] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> > [ 2.892375] [drm:i915_driver_open],
> > [ 2.892388] [drm:intel_crtc_cursor_set], cursor off
> > [ 2.892390] [drm:intel_crtc_set_config], [CRTC:3] [FB:31] #connectors=1 (x y) (0 0)
> > [ 2.892393] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> > [ 2.892396] [drm:intel_crtc_cursor_set], cursor off
> > [ 2.892396] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
> > [ 2.892398] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> > [ 2.892404] [drm:i915_driver_open],
> > [ 2.892408] [drm:intel_crtc_cursor_set], cursor off
> > [ 2.892409] [drm:intel_crtc_set_config], [CRTC:3] [FB:31] #connectors=1 (x y) (0 0)
> > [ 2.892410] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> > [ 2.892411] [drm:intel_crtc_cursor_set], cursor off
> > [ 2.892412] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
> > [ 2.892413] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> > [ 2.892417] [drm:i915_driver_open],
> > [ 2.892452] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
> > [ 2.892454] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
> > [ 2.892458] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> > [ 2.892460] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
> > [ 2.892468] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
> > [ 2.892469] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> > [ 2.892472] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
> > [ 2.892474] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> > [ 2.905530] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> > [ 2.905535] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> > [ 2.905539] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
> > [ 2.905541] [drm:intel_crt_detect], CRT not detected via hotplug
> > [ 2.905746] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> > [ 2.905760] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 2.905766] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> > [ 2.905838] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> > [ 2.906244] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 2.906245] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> > [ 2.906246] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> > [ 2.906248] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
> > [ 2.906254] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> > [ 2.906255] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> > [ 2.906257] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
> > [ 2.906258] [drm:intel_crt_detect], CRT not detected via hotplug
> > [ 2.906424] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> > [ 2.906429] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 2.906433] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> > [ 2.906436] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> > [ 2.906808] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 2.906810] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> > [ 2.906811] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> > [ 2.906813] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
> > [ 2.906818] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> > [ 2.906820] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> > [ 2.914713] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> > [ 2.914715] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> > [ 2.914723] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> > [ 2.914724] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> > [ 2.922725] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> > [ 2.922727] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> > [ 2.922734] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> > [ 2.922735] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> > [ 2.922738] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> > [ 2.922739] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> > [ 2.922740] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> > [ 2.922743] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> > [ 2.922744] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> > [ 2.922745] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> > [ 2.922901] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> > [ 2.922903] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> > [ 2.922904] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> > [ 2.922905] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> > [ 2.922906] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> > [ 2.923060] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> > [ 2.923061] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> > [ 2.923062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> > [ 2.923064] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> > [ 2.923065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> > [ 2.923215] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> > [ 2.923216] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> > [ 2.923217] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> > [ 2.923218] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> > [ 2.923219] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> > [ 2.923368] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> > [ 2.923369] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> > [ 2.923370] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> > [ 2.923372] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> > [ 2.923374] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> > [ 2.923376] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> > [ 2.923377] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> > [ 2.923378] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> > [ 2.923381] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> > [ 2.923382] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> > [ 2.923383] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> > [ 2.923385] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> > [ 2.923387] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> > [ 2.923387] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> > [ 2.923390] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> > [ 2.923401] [drm:drm_mode_addfb], [FB:32]
> > [ 2.952510] [drm:drm_mode_addfb], [FB:32]
> > [ 2.952528] [drm:drm_mode_setcrtc], [CRTC:3]
> > [ 2.952532] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
> > [ 2.952533] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
> > [ 2.952538] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> > [ 2.956869] [drm:ironlake_update_plane], Writing base 0085B000 00000000 0 0 7680
> > [ 2.962715] [drm:intel_update_fbc], fbc set to per-chip default
> > [ 2.962718] [drm:intel_update_fbc], fbc disabled per module param
> > [ 2.971630] [drm:drm_mode_setcrtc], [CRTC:3]
> > [ 2.971645] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
> > [ 2.971651] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
> > [ 2.971662] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> > [ 2.986929] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
> > [ 3.097390] systemd-journald[93]: Received SIGTERM
> > [ 3.717182] [drm:intel_enable_rc6], Sandybridge: deep RC6 disabled
> > [ 3.717186] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
> > [ 3.720922] [drm:gen6_enable_rps], Overclocking supported. Max: 1300MHz, Overclock max: 1300MHz
> > [ 3.805418] SELinux: 2048 avtab hash slots, 95514 rules.
> > [ 3.815116] SELinux: 2048 avtab hash slots, 95514 rules.
> > [ 4.019838] SELinux: 8 users, 82 roles, 4543 types, 259 bools, 1 sens, 1024 cats
> > [ 4.019842] SELinux: 83 classes, 95514 rules
> > [ 4.022492] SELinux: Completing initialization.
> > [ 4.022495] SELinux: Setting up existing superblocks.
> > [ 4.022499] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> > [ 4.022501] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> > [ 4.022508] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> > [ 4.022510] SELinux: initialized (dev proc, type proc), uses genfs_contexts
> > [ 4.022515] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> > [ 4.022538] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
> > [ 4.023039] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> > [ 4.023042] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> > [ 4.023484] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> > [ 4.023492] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
> > [ 4.023494] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> > [ 4.023506] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
> > [ 4.023511] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> > [ 4.023517] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> > [ 4.023524] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> > [ 4.023707] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
> > [ 4.023709] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> > [ 4.023712] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> > [ 4.023752] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> > [ 4.023771] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> > [ 4.023775] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
> > [ 4.023776] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> > [ 4.023780] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> > [ 4.023793] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> > [ 4.023796] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> > [ 4.023798] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> > [ 4.023800] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> > [ 4.023804] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> > [ 4.023809] SELinux: initialized (dev sda6, type ext4), uses xattr
> > [ 4.041270] type=1403 audit(1380123009.042:2): policy loaded auid=4294967295 ses=4294967295
> > [ 4.055557] systemd[1]: Successfully loaded SELinux policy in 401.696ms.
> > [ 4.066502] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
> > [ 4.081954] systemd[1]: Relabelled /dev and /run in 11.060ms.
> > [ 4.110674] LVM: Logical Volume autoactivation enabled.
> > [ 4.110679] LVM: Activation generator successfully completed.
> > [ 4.181733] systemd-readahead[192]: Failed to mark /: Invalid argument
> > [ 4.181896] systemd-readahead[191]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
> > [ 4.182921] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> > [ 4.200445] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
> > [ 4.200959] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> > [ 4.202755] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
> > [ 4.227484] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
> > [ 4.244191] systemd-udevd[228]: starting version 204
> > [ 4.439622] EXT4-fs (sda6): re-mounted. Opts: (null)
> > [ 4.480305] wmi: Mapper loaded
> > [ 4.481095] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
> > [ 4.485577] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130517/utaddress-251)
> > [ 4.485584] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> > [ 4.485588] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130517/utaddress-251)
> > [ 4.485591] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> > [ 4.485592] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130517/utaddress-251)
> > [ 4.485595] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> > [ 4.485597] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130517/utaddress-251)
> > [ 4.485599] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> > [ 4.485601] lpc_ich: Resource conflict(s) found affecting gpio_ich
> > [ 4.488722] pps_core: LinuxPPS API ver. 1 registered
> > [ 4.488725] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> > [ 4.488732] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> > [ 4.491855] PTP clock support registered
> > [ 4.495807] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
> > [ 4.496953] thinkpad_acpi: ThinkPad ACPI Extras v0.24
> > [ 4.496956] thinkpad_acpi: http://ibm-acpi.sf.net/
> > [ 4.496958] thinkpad_acpi: ThinkPad BIOS 8AET57WW (1.37 ), EC unknown
> > [ 4.496959] thinkpad_acpi: Lenovo ThinkPad T520, model 4243BQ9
> > [ 4.498434] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
> > [ 4.498555] thinkpad_acpi: radio switch found; radios are disabled
> > [ 4.498568] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
> > [ 4.498569] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
> > [ 4.500313] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
> > [ 4.501526] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
> > [ 4.501694] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
> > [ 4.502778] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
> > [ 4.517382] sdhci: Secure Digital Host Controller Interface driver
> > [ 4.517386] sdhci: Copyright(c) Pierre Ossman
> > [ 4.517485] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
> > [ 4.525533] input: PC Speaker as /devices/platform/pcspkr/input/input10
> > [ 4.529864] Linux video capture interface: v2.00
> > [ 4.531095] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 5)
> > [ 4.531411] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
> > [ 4.536862] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
> > [ 4.536865] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
> > [ 4.536966] e1000e 0000:00:19.0: setting latency timer to 64
> > [ 4.537021] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
> > [ 4.537039] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
> > [ 4.540827] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26
> > [ 4.545094] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26
> > [ 4.545558] microcode: CPU0 updated to revision 0x29, date = 2013-06-12
> > [ 4.545659] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26
> > [ 4.545685] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26
> > [ 4.545943] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
> > [ 4.545948] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x26
> > [ 4.545971] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x26
> > [ 4.546263] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
> > [ 4.546279] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x26
> > [ 4.546305] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x26
> > [ 4.546592] microcode: CPU3 updated to revision 0x29, date = 2013-06-12
> > [ 4.546595] perf_event_intel: PEBS enabled due to microcode update
> > [ 4.546639] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
> > [ 4.550982] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
> > [ 4.552463] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input11
> > [ 4.552580] usbcore: registered new interface driver uvcvideo
> > [ 4.552582] USB Video Class driver (1.1.1)
> > [ 4.555147] cfg80211: Calling CRDA to update world regulatory domain
> > [ 4.571884] Intel(R) Wireless WiFi driver for Linux, in-tree:d
> > [ 4.571888] Copyright(c) 2003-2013 Intel Corporation
> > [ 4.572018] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
> > [ 4.572156] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
> > [ 4.629648] iTCO_vendor_support: vendor-support=0
> > [ 4.630909] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
> > [ 4.630943] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
> > [ 4.631247] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> > [ 4.640444] cfg80211: World regulatory domain updated:
> > [ 4.640448] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> > [ 4.640450] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> > [ 4.640452] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> > [ 4.640454] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
> > [ 4.640456] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> > [ 4.640457] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> > [ 4.735089] e1000e 0000:00:19.0 eth0: registered PHC clock
> > [ 4.735104] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:ea:9a:6b
> > [ 4.735112] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
> > [ 4.735173] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
> > [ 4.735523] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
> > [ 4.746267] systemd-udevd[259]: renamed network interface eth0 to em1
> > [ 4.872601] hda_codec: CX20590: BIOS auto-probing.
> > [ 4.873157] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
> > [ 4.873166] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> > [ 4.873172] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
> > [ 4.873176] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0
> > [ 4.873180] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs:
> > [ 4.873186] ALSA sound/pci/hda/hda_auto_parser.c:410 Mic=0x1b
> > [ 4.873190] ALSA sound/pci/hda/hda_auto_parser.c:410 Internal Mic=0x23
> > [ 4.873195] ALSA sound/pci/hda/hda_auto_parser.c:410 Dock Mic=0x1a
> > [ 4.874287] ALSA sound/pci/hda/patch_conexant.c:3414 hda_codec: Enable sync_write for stable communication
> > [ 4.877811] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
> > [ 4.879640] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
> > [ 4.879655] SELinux: initialized (dev sda3, type ext3), uses xattr
> > [ 4.884552] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> > [ 4.884667] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
> > [ 4.884754] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
> > [ 4.884836] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
> > [ 4.884910] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
> > [ 4.884987] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
> > [ 4.885059] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
> > [ 4.900808] type=1305 audit(1380123009.901:3): audit_pid=349 old=0 auid=4294967295 ses=4294967295
> > subj=system_u:system_r:auditd_t:s0 res=1
> > [ 5.735143] systemd-logind[379]: Watching system buttons on /dev/input/event2 (Power Button)
> > [ 5.735280] systemd-logind[379]: Watching system buttons on /dev/input/event8 (Video Bus)
> > [ 5.735347] systemd-logind[379]: Watching system buttons on /dev/input/event0 (Lid Switch)
> > [ 5.735403] systemd-logind[379]: Watching system buttons on /dev/input/event1 (Sleep Button)
> > [ 5.735481] systemd-logind[379]: Watching system buttons on /dev/input/event9 (ThinkPad Extra Buttons)
> > [ 5.920803] ip6_tables: (C) 2000-2006 Netfilter Core Team
> > [ 5.933896] Ebtables v2.0 registered
> > [ 5.986358] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> > [ 6.042192] Bluetooth: Core ver 2.16
> > [ 6.042253] NET: Registered protocol family 31
> > [ 6.042255] Bluetooth: HCI device and connection manager initialized
> > [ 6.042263] Bluetooth: HCI socket layer initialized
> > [ 6.042265] Bluetooth: L2CAP socket layer initialized
> > [ 6.042270] Bluetooth: SCO socket layer initialized
> > [ 6.057566] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> > [ 6.057569] Bluetooth: BNEP filters: protocol multicast
> > [ 6.057583] Bluetooth: BNEP socket layer initialized
> > [ 6.148298] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
> > [ 6.171436] Bridge firewalling registered
> > [ 6.248722] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
> > [ 6.248982] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
> > [ 6.265639] tun: Universal TUN/TAP device driver, 1.6
> > [ 6.265643] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> > [ 6.295982] device virbr0-nic entered promiscuous mode
> > [ 6.393556] [drm:i915_driver_open],
> > [ 6.400057] [drm:i915_driver_open],
> > [ 6.400067] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
> > [ 6.400346] [drm:i915_driver_open],
> > [ 6.400603] [drm:i915_driver_open],
> > [ 6.400616] [drm:i915_driver_open],
> > [ 6.400886] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
> > [ 6.400890] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
> > [ 6.400933] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> > [ 6.400936] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
> > [ 6.400947] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
> > [ 6.400949] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> > [ 6.400952] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
> > [ 6.400957] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> > [ 6.401174] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> > [ 6.401177] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> > [ 6.401182] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
> > [ 6.401183] [drm:intel_crt_detect], CRT not detected via hotplug
> > [ 6.401340] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> > [ 6.401343] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 6.401345] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> > [ 6.401346] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> > [ 6.401722] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 6.401724] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> > [ 6.401726] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> > [ 6.401728] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
> > [ 6.401733] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> > [ 6.401735] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> > [ 6.401738] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
> > [ 6.401739] [drm:intel_crt_detect], CRT not detected via hotplug
> > [ 6.401897] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> > [ 6.401899] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 6.401901] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> > [ 6.401902] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> > [ 6.402265] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 6.402267] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> > [ 6.402268] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> > [ 6.402269] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
> > [ 6.402289] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> > [ 6.402290] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> > [ 6.409646] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> > [ 6.409650] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> > [ 6.409665] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> > [ 6.409671] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> > [ 6.417648] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> > [ 6.417651] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> > [ 6.417694] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> > [ 6.417695] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> > [ 6.417699] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> > [ 6.417700] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> > [ 6.417701] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> > [ 6.417704] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> > [ 6.417714] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> > [ 6.417716] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> > [ 6.417895] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> > [ 6.417899] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> > [ 6.417900] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> > [ 6.417905] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> > [ 6.417906] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> > [ 6.418074] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> > [ 6.418075] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> > [ 6.418076] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> > [ 6.418102] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> > [ 6.418104] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> > [ 6.418261] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> > [ 6.418262] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> > [ 6.418263] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> > [ 6.418265] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> > [ 6.418266] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> > [ 6.418423] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> > [ 6.418424] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> > [ 6.418425] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> > [ 6.418439] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> > [ 6.418440] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> > [ 6.418443] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> > [ 6.418445] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> > [ 6.418446] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> > [ 6.418448] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> > [ 6.418458] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> > [ 6.418459] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> > [ 6.418462] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> > [ 6.418463] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> > [ 6.418464] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> > [ 6.418466] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> > [ 6.418492] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> > [ 6.418494] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
> > [ 6.418503] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
> > [ 6.418504] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> > [ 6.418506] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
> > [ 6.418508] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> > [ 6.419211] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> > [ 6.419214] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> > [ 6.419218] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
> > [ 6.419219] [drm:intel_crt_detect], CRT not detected via hotplug
> > [ 6.419378] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> > [ 6.419381] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 6.419382] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> > [ 6.419384] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> > [ 6.419762] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 6.419764] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> > [ 6.419766] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> > [ 6.419767] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
> > [ 6.419988] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> > [ 6.419991] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> > [ 6.419994] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
> > [ 6.419995] [drm:intel_crt_detect], CRT not detected via hotplug
> > [ 6.420152] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> > [ 6.420155] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 6.420157] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> > [ 6.420158] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> > [ 6.420523] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 6.420525] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> > [ 6.420527] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> > [ 6.420529] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
> > [ 6.420552] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> > [ 6.420555] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> > [ 6.427650] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> > [ 6.427654] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> > [ 6.427669] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> > [ 6.427671] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> > [ 6.435654] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> > [ 6.435659] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> > [ 6.435715] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> > [ 6.435719] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> > [ 6.435723] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> > [ 6.435726] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> > [ 6.435728] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> > [ 6.435731] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> > [ 6.435749] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> > [ 6.435751] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> > [ 6.435908] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> > [ 6.435910] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> > [ 6.435911] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> > [ 6.435914] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> > [ 6.435915] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> > [ 6.436072] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> > [ 6.436073] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> > [ 6.436074] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> > [ 6.436091] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> > [ 6.436094] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> > [ 6.436257] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> > [ 6.436260] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> > [ 6.436263] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> > [ 6.436268] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> > [ 6.436270] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> > [ 6.436432] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
> > [ 6.436436] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> > [ 6.436438] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> > [ 6.436440] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> > [ 6.436468] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> > [ 6.436470] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> > [ 6.436474] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> > [ 6.436477] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> > [ 6.436478] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> > [ 6.436481] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> > [ 6.436496] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> > [ 6.436498] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> > [ 6.436501] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> > [ 6.436503] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> > [ 6.436505] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> > [ 6.436508] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> > [ 6.439518] [drm:asle_set_backlight], bclp = 0x800000ff
> > [ 6.439525] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> > [ 6.439527] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
> > [ 6.439529] [drm:asle_set_pwm_freq], PWM freq is not supported
> > [ 6.440077] [drm:asle_set_backlight], bclp = 0x800000ff
> > [ 6.440081] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> > [ 6.440083] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
> > [ 6.440084] [drm:asle_set_pwm_freq], PWM freq is not supported
> > [ 6.441311] [drm:drm_mode_addfb], [FB:33]
> > [ 6.441353] [drm:drm_mode_setcrtc], [CRTC:3]
> > [ 6.441355] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
> > [ 6.441357] [drm:intel_crtc_set_config], [CRTC:3] [FB:33] #connectors=1 (x y) (0 0)
> > [ 6.441360] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> > [ 6.445333] [drm:ironlake_update_plane], Writing base 01044000 00000000 0 0 7680
> > [ 6.448640] [drm:intel_update_fbc], fbc set to per-chip default
> > [ 6.448644] [drm:intel_update_fbc], fbc disabled per module param
> > [ 6.448684] [drm:drm_mode_setcrtc], [CRTC:5]
> > [ 6.448686] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
> > [ 6.448688] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> > [ 8.031174] e1000e: em1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
> > [ 8.031189] e1000e 0000:00:19.0 em1: 10/100 speed: disabling TSO
> > [ 8.031250] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
> > [ 8.421083] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
> > [ 8.757041] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input19
> > [ 8.925160] virbr0: topology change detected, propagating
> > [ 8.925173] virbr0: port 1(virbr0-nic) entered forwarding state
> > [ 8.925202] virbr0: port 1(virbr0-nic) entered forwarding state
> > [ 8.962042] virbr0: port 1(virbr0-nic) entered disabled state
> > [ 10.242281] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> > [ 10.242325] SELinux: initialized (dev proc, type proc), uses genfs_contexts
> > [ 10.275116] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> > [ 10.278068] SELinux: initialized (dev proc, type proc), uses genfs_contexts
> > [ 27.729447] [drm:i915_hotplug_work_func], running encoder hotplug functions
> > [ 27.729462] [drm:i915_hotplug_work_func], Connector VGA-1 (pin 1) received hotplug event.
> > [ 27.729472] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
> > [ 27.729477] [drm:intel_crt_detect], CRT detected via hotplug
> > [ 27.729481] [drm:intel_hpd_irq_event], [CONNECTOR:14:VGA-1] status updated from 2 to 1
> > [ 27.736261] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> > [ 27.736274] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
> > [ 27.736643] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
> > [ 27.736651] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> > [ 27.736659] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
> > [ 27.736676] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> > [ 27.737201] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> > [ 27.737208] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> > [ 27.737216] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
> > [ 27.737220] [drm:intel_crt_detect], CRT detected via hotplug
> > [ 27.750371] [drm:drm_edid_to_eld], ELD: no CEA Extension found
> > [ 27.750401] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] probed modes :
> > [ 27.750406] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
> > [ 27.750415] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
> > [ 27.750421] [drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
> > [ 27.750428] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
> > [ 27.750434] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
> > [ 27.750440] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> > [ 27.750446] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
> > [ 27.750452] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
> > [ 27.750458] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
> > [ 27.750464] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> > [ 27.750470] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
> > [ 27.750476] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
> > [ 27.750482] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
> > [ 27.750488] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
> > [ 27.750494] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
> > [ 27.750499] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
> > [ 27.750522] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> > [ 27.750612] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> > [ 27.750617] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> > [ 27.758319] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> > [ 27.758326] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> > [ 27.758337] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> > [ 27.758341] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> > [ 27.766324] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> > [ 27.766333] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> > [ 27.766391] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> > [ 27.766399] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> > [ 27.766406] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> > [ 27.766413] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> > [ 27.766416] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> > [ 27.766422] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> > [ 27.766431] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> > [ 27.766435] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> > [ 27.766677] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> > [ 27.766690] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> > [ 27.766696] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> > [ 27.766713] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> > [ 27.766718] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> > [ 27.766916] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> > [ 27.766922] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> > [ 27.766927] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> > [ 27.766948] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> > [ 27.766952] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> > [ 27.767120] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> > [ 27.767125] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> > [ 27.767129] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> > [ 27.767138] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> > [ 27.767141] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> > [ 27.767339] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> > [ 27.767346] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> > [ 27.767353] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> > [ 27.767374] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> > [ 27.767409] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> > [ 27.767433] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> > [ 27.767460] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> > [ 27.767479] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> > [ 27.767487] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> > [ 27.767499] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> > [ 27.767505] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> > [ 27.767513] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> > [ 27.767524] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> > [ 27.767531] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> > [ 27.767540] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> > [ 33.091303] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> > [ 33.091318] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
> > [ 33.091347] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
> > [ 33.091352] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> > [ 33.091361] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
> > [ 33.091374] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> > [ 33.091933] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> > [ 33.091937] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> > [ 33.091942] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
> > [ 33.091944] [drm:intel_crt_detect], CRT detected via hotplug
> > [ 33.105079] [drm:drm_edid_to_eld], ELD: no CEA Extension found
> > [ 33.105116] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] probed modes :
> > [ 33.105122] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
> > [ 33.105130] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
> > [ 33.105136] [drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
> > [ 33.105143] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
> > [ 33.105149] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
> > [ 33.105155] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> > [ 33.105161] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
> > [ 33.105167] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
> > [ 33.105173] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
> > [ 33.105179] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> > [ 33.105185] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
> > [ 33.105191] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
> > [ 33.105197] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
> > [ 33.105202] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
> > [ 33.105208] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
> > [ 33.105214] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
> > [ 33.105247] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> > [ 33.105344] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> > [ 33.105350] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> > [ 33.112744] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> > [ 33.112754] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> > [ 33.112798] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> > [ 33.112803] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> > [ 33.120747] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> > [ 33.120753] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> > [ 33.120789] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> > [ 33.120794] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> > [ 33.120801] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> > [ 33.120808] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> > [ 33.120811] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> > [ 33.120817] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> > [ 33.120826] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> > [ 33.120830] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> > [ 33.121026] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> > [ 33.121034] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> > [ 33.121038] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> > [ 33.121049] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> > [ 33.121053] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> > [ 33.121262] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> > [ 33.121269] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> > [ 33.121273] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> > [ 33.121289] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> > [ 33.121294] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> > [ 33.121466] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> > [ 33.121471] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> > [ 33.121475] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> > [ 33.121484] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> > [ 33.121488] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> > [ 33.121657] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> > [ 33.121662] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> > [ 33.121666] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> > [ 33.121678] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> > [ 33.121682] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> > [ 33.121688] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> > [ 33.121693] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> > [ 33.121697] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> > [ 33.121702] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> > [ 33.121710] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> > [ 33.121714] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> > [ 33.121740] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> > [ 33.121747] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> > [ 33.121751] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> > [ 33.121756] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> > [ 33.640251] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> > [ 33.640258] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
> > [ 33.640269] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
> > [ 33.640271] [drm:drm_mode_debug_printmodeline], Modeline 10:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> > [ 33.640274] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 50 115830 1920 1980 2028 2050 1080 1090 1100 1130 0x40 0xa
> > [ 33.640279] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
> > [ 33.640474] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> > [ 33.640477] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
> > [ 33.640481] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
> > [ 33.640483] [drm:intel_crt_detect], CRT detected via hotplug
> > [ 33.654037] [drm:drm_edid_to_eld], ELD: no CEA Extension found
> > [ 33.654049] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] probed modes :
> > [ 33.654050] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
> > [ 33.654052] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
> > [ 33.654054] [drm:drm_mode_debug_printmodeline], Modeline 35:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
> > [ 33.654056] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
> > [ 33.654057] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
> > [ 33.654059] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> > [ 33.654060] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
> > [ 33.654062] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
> > [ 33.654063] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
> > [ 33.654065] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> > [ 33.654066] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
> > [ 33.654068] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
> > [ 33.654069] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
> > [ 33.654071] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
> > [ 33.654072] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
> > [ 33.654074] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
> > [ 33.654089] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
> > [ 33.654123] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> > [ 33.654124] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> > [ 33.661890] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> > [ 33.661895] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> > [ 33.661917] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
> > [ 33.661920] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
> > [ 33.669885] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> > [ 33.669890] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
> > [ 33.669904] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> > [ 33.669906] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> > [ 33.669910] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> > [ 33.669911] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
> > [ 33.669912] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
> > [ 33.669915] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
> > [ 33.669917] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> > [ 33.669918] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> > [ 33.670152] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> > [ 33.670161] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> > [ 33.670166] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> > [ 33.670176] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
> > [ 33.670180] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
> > [ 33.670356] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> > [ 33.670397] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> > [ 33.670398] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
> > [ 33.670403] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> > [ 33.670404] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> > [ 33.670553] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> > [ 33.670556] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> > [ 33.670558] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> > [ 33.670562] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
> > [ 33.670564] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
> > [ 33.670716] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> > [ 33.670717] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> > [ 33.670718] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
> > [ 33.670723] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> > [ 33.670724] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> > [ 33.670727] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> > [ 33.670729] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
> > [ 33.670730] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
> > [ 33.670732] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
> > [ 33.670735] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> > [ 33.670736] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> > [ 33.670737] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> > [ 33.670739] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
> > [ 33.670739] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
> > [ 33.670742] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
> > [ 33.677531] [drm:asle_set_backlight], bclp = 0x800000ff
> > [ 33.677537] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> > [ 33.677538] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
> > [ 33.677539] [drm:asle_set_pwm_freq], PWM freq is not supported
> > [ 33.726901] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
> > [ 33.727110] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
> > [ 33.727113] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
> > [ 33.727289] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
> > [ 33.727290] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
> > [ 33.727321] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40000, result 1
> > [ 33.727323] [drm:intel_crt_detect], CRT detected via hotplug
> > [ 33.733627] [drm:asle_set_backlight], bclp = 0x800000ff
> > [ 33.733632] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> > [ 33.733633] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
> > [ 33.733635] [drm:asle_set_pwm_freq], PWM freq is not supported
> > [ 33.735261] [drm:asle_set_backlight], bclp = 0x800000ff
> > [ 33.735267] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> > [ 33.735269] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
> > [ 33.735270] [drm:asle_set_pwm_freq], PWM freq is not supported
> > [ 34.118911] [drm:asle_set_backlight], bclp = 0x80000003
> > [ 34.118929] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> > [ 34.118938] [drm:intel_panel_actually_set_backlight], set backlight PWM = 51
> > [ 34.118946] [drm:asle_set_pwm_freq], PWM freq is not supported
> > [ 34.120083] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
> > [ 34.490192] [drm:intel_disable_shared_dpll], disable PCH DPLL A (active 1, on? 1) for crtc 3
> > [ 34.490211] [drm:intel_disable_shared_dpll], disabling PCH DPLL A
> > [ 34.490631] [drm:intel_update_fbc], no output, disabling
> > [ 34.490657] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
> > [ 34.490664] [drm:check_encoder_state], [ENCODER:15:DAC-15]
> > [ 34.490670] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
> > [ 34.490675] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
> > [ 34.490681] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
> > [ 34.490686] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
> > [ 34.490691] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
> > [ 34.490697] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
> > [ 34.490702] [drm:check_crtc_state], [CRTC:3]
> > [ 34.490709] [drm:check_crtc_state], [CRTC:5]
> > [ 34.490713] [drm:check_shared_dpll_state], PCH DPLL A
> > [ 34.490721] [drm:check_shared_dpll_state], PCH DPLL B
> > [ 34.494256] [drm:drm_mode_addfb], [FB:50]
> > [ 34.494311] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
> > [ 34.494321] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [NOCRTC]
> > [ 34.494326] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
> > [ 34.494330] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
> > [ 34.494336] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
> > [ 34.494359] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
> > [ 34.494365] [drm:check_encoder_state], [ENCODER:15:DAC-15]
> > [ 34.494371] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
> > [ 34.494377] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
> > [ 34.494382] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
> > [ 34.494387] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
> > [ 34.494393] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
> > [ 34.494398] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
> > [ 34.494403] [drm:check_crtc_state], [CRTC:3]
> > [ 34.494408] [drm:check_crtc_state], [CRTC:5]
> > [ 34.494412] [drm:check_shared_dpll_state], PCH DPLL A
> > [ 34.494420] [drm:check_shared_dpll_state], PCH DPLL B
> > [ 34.505438] [drm:drm_mode_setcrtc], [CRTC:3]
> > [ 34.505447] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
> > [ 34.505449] [drm:intel_crtc_set_config], [CRTC:3] [FB:50] #connectors=1 (x y) (0 0)
> > [ 34.505451] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
> > [ 34.505464] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
> > [ 34.505465] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 60 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x48 0xa
> > [ 34.505467] [drm:drm_mode_debug_printmodeline], Modeline 33:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
> > [ 34.505468] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
> > [ 34.505470] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> > [ 34.505471] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
> > [ 34.505472] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
> > [ 34.505474] [drm:connected_sink_compute_bpp], [CONNECTOR:7:LVDS-1] checking for sink bpp constrains
> > [ 34.505477] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
> > [ 34.505479] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe A, lanes 2
> > [ 34.505480] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
> > [ 34.505482] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
> > [ 34.505483] [drm:intel_dump_pipe_config], cpu_transcoder: A
> > [ 34.505484] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
> > [ 34.505485] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
> > [ 34.505486] [drm:intel_dump_pipe_config], requested mode:
> > [ 34.505487] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
> > [ 34.505488] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 34.505489] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x0 0x5
> > [ 34.505490] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 34.505491] [drm:intel_dump_pipe_config], pch pfit: pos: 0x011d0000, size: 0x05460438
> > [ 34.505492] [drm:intel_dump_pipe_config], ips: 0
> > [ 34.505495] [drm:ironlake_get_refclk], using SSC reference clock of 120 MHz
> > [ 34.505510] [drm:intel_get_shared_dpll], CRTC:3 allocated PCH DPLL A
> > [ 34.505511] [drm:intel_get_shared_dpll], using PCH DPLL A for pipe A
> > [ 34.505512] [drm:intel_get_shared_dpll], setting up PCH DPLL A
> > [ 34.512154] [drm:ironlake_update_plane], Writing base 02057000 00000000 0 0 5120
> > [ 34.512181] [drm:intel_update_fbc], no output, disabling
> > [ 34.512197] [drm:intel_crtc_mode_set], [ENCODER:8:LVDS-8] set [MODE:0:]
> > [ 34.512207] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
> > [ 34.512214] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
> > [ 34.512220] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
> > [ 34.512225] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
> > [ 34.564244] [drm:ironlake_wait_for_vblank], vblank wait timed out
> > [ 34.616207] [drm:ironlake_wait_for_vblank], vblank wait timed out
> > [ 34.617038] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
> > [ 34.617045] [drm:gen6_fdi_link_train], FDI train 1 done.
> > [ 34.617707] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
> > [ 34.617714] [drm:gen6_fdi_link_train], FDI train 2 done.
> > [ 34.617716] [drm:gen6_fdi_link_train], FDI train done.
> > [ 34.617720] [drm:ironlake_enable_shared_dpll], enable PCH DPLL A (active 0, on? 0)for crtc 3
> > [ 34.617726] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL A
> > [ 34.618965] [drm:intel_update_fbc], fbc set to per-chip default
> > [ 34.618969] [drm:intel_update_fbc], fbc disabled per module param
> > [ 35.038327] [drm:intel_panel_actually_set_backlight], set backlight PWM = 51
> > [ 35.056348] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1]
> > [ 35.056375] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
> > [ 35.056382] [drm:check_encoder_state], [ENCODER:15:DAC-15]
> > [ 35.056388] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
> > [ 35.056393] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
> > [ 35.056399] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
> > [ 35.056404] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
> > [ 35.056409] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
> > [ 35.056414] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
> > [ 35.056420] [drm:check_crtc_state], [CRTC:3]
> > [ 35.056444] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.flags (expected 1, found 0)
> > [ 35.056451] ------------[ cut here ]------------
> > [ 35.056515] WARNING: CPU: 0 PID: 605 at drivers/gpu/drm/i915/intel_display.c:8286 check_crtc_state+0x5cf/0xa50 [i915]()
> > [ 35.056518] pipe state doesn't match!
> > [ 35.056521] Modules linked in: ebtable_nat xt_CHECKSUM nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_nat nf_nat_ipv6 ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 tun nf_defrag_ipv6 bridge stp llc iptable_nat nf_nat_ipv4 nf_nat iptable_mangle bnep bluetooth nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_conexant iTCO_wdt iTCO_vendor_support x86_pkg_temp_thermal coretemp kvm_intel kvm snd_hda_intel snd_hda_codec snd_hwdep snd_seq iwlwifi crc32c_intel snd_seq_device ghash_clmulni_intel snd_pcm cfg80211 uvcvideo videobuf2_vmalloc microcode videobuf2_memops videobuf2_core e1000e sdhci_pci videodev pcspkr serio_raw sdhci mmc_core thinkpad_acpi snd_page_alloc i2c_i801 snd_timer ptp snd
> > [ 35.056597] pps_core shpchp lpc_ich mfd_core tpm_tis wmi soundcore tpm rfkill tpm_bios uinput binfmt_misc firewire_ohci firewire_core crc_itu_t i915 i2c_algo_bit drm_kms_helper drm i2c_core video
> > [ 35.056627] CPU: 0 PID: 605 Comm: X Not tainted 3.11.0-mst #258
> > [ 35.056631] Hardware name: LENOVO 4243BQ9/4243BQ9, BIOS 8AET57WW (1.37 ) 04/05/2012
> > [ 35.056635] 000000000000205e ffff8801fede7728 ffffffff81647c9b ffff8801fede7768
> > [ 35.056644] ffffffff81056d6c ffff880212201478 0000000000000002 ffff8802144d5000
> > [ 35.056650] 0000000000000001 ffff880212201478 ffff880212201000 ffff8801fede7848
> > [ 35.056657] Call Trace:
> > [ 35.056671] [<ffffffff81647c9b>] dump_stack+0x6a/0x77
> > [ 35.056683] [<ffffffff81056d6c>] warn_slowpath_common+0x8c/0xc0
> > [ 35.056691] [<ffffffff81056e9e>] warn_slowpath_fmt+0x6e/0x70
> > [ 35.056724] [<ffffffffa0084385>] ? i915_read32+0x75/0x130 [i915]
> > [ 35.056750] [<ffffffffa0084385>] ? i915_read32+0x75/0x130 [i915]
> > [ 35.056788] [<ffffffffa00bf275>] ? intel_lvds_get_config+0x45/0xb0 [i915]
> > [ 35.056820] [<ffffffffa00ae6ef>] check_crtc_state+0x5cf/0xa50 [i915]
> > [ 35.056856] [<ffffffffa00b59e5>] intel_modeset_check_state+0x2e5/0x7c0 [i915]
> > [ 35.056887] [<ffffffffa00bc54d>] intel_set_mode+0x2d/0x40 [i915]
> > [ 35.056917] [<ffffffffa00bd338>] intel_crtc_set_config+0x878/0x990 [i915]
> > [ 35.056952] [<ffffffffa003189b>] drm_mode_set_config_internal+0x5b/0xf0 [drm]
> > [ 35.056978] [<ffffffffa0032efe>] drm_mode_setcrtc+0x31e/0x5e0 [drm]
> > [ 35.057003] [<ffffffffa002163a>] drm_ioctl+0x3da/0x660 [drm]
> > [ 35.057033] [<ffffffffa0032be0>] ? drm_mode_create+0x70/0x70 [drm]
> > [ 35.057042] [<ffffffff812963aa>] ? file_has_perm+0xaa/0xb0
> > [ 35.057084] [<ffffffffa00ebbc5>] i915_compat_ioctl+0x45/0x50 [i915]
> > [ 35.057094] [<ffffffff811e6336>] compat_sys_ioctl+0x106/0x13a0
> > [ 35.057104] [<ffffffff811930d8>] ? fsnotify_access+0x68/0x80
> > [ 35.057112] [<ffffffff81193958>] ? vfs_read+0xd8/0x130
> > [ 35.057119] [<ffffffff810dd9bb>] ? __audit_syscall_exit+0x23b/0x2e0
> > [ 35.057129] [<ffffffff81656875>] sysenter_dispatch+0x7/0x1a
> > [ 35.057134] ---[ end trace da13b750719727e1 ]---
> > [ 35.057137] [drm:intel_dump_pipe_config], [CRTC:3][hw state] config for pipe A
> > [ 35.057142] [drm:intel_dump_pipe_config], cpu_transcoder: A
> > [ 35.057146] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
> > [ 35.057150] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
> > [ 35.057155] [drm:intel_dump_pipe_config], requested mode:
> > [ 35.057159] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1280 0 0 0 1024 0 0 0 0x0 0x0
> > [ 35.057166] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 35.057169] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
> > [ 35.057175] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 35.057179] [drm:intel_dump_pipe_config], pch pfit: pos: 0x011d0000, size: 0x05460438
> > [ 35.057183] [drm:intel_dump_pipe_config], ips: 0
> > [ 35.057187] [drm:intel_dump_pipe_config], [CRTC:3][sw state] config for pipe A
> > [ 35.057190] [drm:intel_dump_pipe_config], cpu_transcoder: A
> > [ 35.057194] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
> > [ 35.057197] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
> > [ 35.057202] [drm:intel_dump_pipe_config], requested mode:
> > [ 35.057206] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
> > [ 35.057212] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 35.057215] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x0 0x5
> > [ 35.057221] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 35.057224] [drm:intel_dump_pipe_config], pch pfit: pos: 0x011d0000, size: 0x05460438
> > [ 35.057272] [drm:intel_dump_pipe_config], ips: 0
> > [ 35.057277] [drm:check_crtc_state], [CRTC:5]
> > [ 35.057282] [drm:check_shared_dpll_state], PCH DPLL A
> > [ 35.057290] [drm:check_shared_dpll_state], PCH DPLL B
> > [ 35.058635] [drm:asle_set_backlight], bclp = 0x800000ff
> > [ 35.058644] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> > [ 35.058648] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
> > [ 35.058653] [drm:asle_set_pwm_freq], PWM freq is not supported
> > [ 35.061950] [drm:drm_mode_setcrtc], [CRTC:5]
> > [ 35.061964] [drm:drm_mode_setcrtc], [CONNECTOR:14:VGA-1]
> > [ 35.061967] [drm:intel_crtc_set_config], [CRTC:5] [FB:50] #connectors=1 (x y) (0 0)
> > [ 35.061973] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
> > [ 35.061975] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
> > [ 35.061976] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> > [ 35.061978] [drm:drm_mode_debug_printmodeline], Modeline 33:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
> > [ 35.061980] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
> > [ 35.061982] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
> > [ 35.061984] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:VGA-1] to [CRTC:5]
> > [ 35.061985] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
> > [ 35.061987] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
> > [ 35.061989] [drm:connected_sink_compute_bpp], [CONNECTOR:14:VGA-1] checking for sink bpp constrains
> > [ 35.061992] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe B, lanes 2
> > [ 35.061993] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
> > [ 35.061994] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
> > [ 35.061996] [drm:intel_dump_pipe_config], cpu_transcoder: B
> > [ 35.061996] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
> > [ 35.061997] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
> > [ 35.061999] [drm:intel_dump_pipe_config], requested mode:
> > [ 35.061999] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
> > [ 35.062001] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 35.062002] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
> > [ 35.062003] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 35.062004] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
> > [ 35.062005] [drm:intel_dump_pipe_config], ips: 0
> > [ 35.062023] [drm:intel_get_shared_dpll], CRTC:5 allocated PCH DPLL B
> > [ 35.062024] [drm:intel_get_shared_dpll], using PCH DPLL B for pipe B
> > [ 35.062024] [drm:intel_get_shared_dpll], setting up PCH DPLL B
> > [ 35.062355] [drm:ironlake_update_plane], Writing base 02057000 00000000 0 0 5120
> > [ 35.062360] [drm:intel_update_fbc], fbc set to per-chip default
> > [ 35.062361] [drm:intel_update_fbc], fbc disabled per module param
> > [ 35.062365] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
> > [ 35.062367] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
> > [ 35.062369] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
> > [ 35.062371] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
> > [ 35.062372] [drm:intel_crtc_mode_set], [ENCODER:15:DAC-15] set [MODE:0:]
> > [ 35.062378] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
> > [ 35.062379] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
> > [ 35.114395] [drm:ironlake_wait_for_vblank], vblank wait timed out
> > [ 35.166363] [drm:ironlake_wait_for_vblank], vblank wait timed out
> > [ 35.167193] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
> > [ 35.167200] [drm:gen6_fdi_link_train], FDI train 1 done.
> > [ 35.167862] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
> > [ 35.167870] [drm:gen6_fdi_link_train], FDI train 2 done.
> > [ 35.167873] [drm:gen6_fdi_link_train], FDI train done.
> > [ 35.167877] [drm:ironlake_enable_shared_dpll], enable PCH DPLL B (active 0, on? 0)for crtc 5
> > [ 35.167883] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL B
> > [ 35.169123] [drm:intel_update_fbc], more than one pipe active, disabling compression
> > [ 35.187376] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1]
> > [ 35.187393] [drm:intel_connector_check_state], [CONNECTOR:14:VGA-1]
> > [ 35.187412] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
> > [ 35.187419] [drm:check_encoder_state], [ENCODER:15:DAC-15]
> > [ 35.187424] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
> > [ 35.187430] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
> > [ 35.187436] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
> > [ 35.187440] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
> > [ 35.187446] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
> > [ 35.187451] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
> > [ 35.187457] [drm:check_crtc_state], [CRTC:3]
> > [ 35.187481] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.flags (expected 1, found 0)
> > [ 35.187489] ------------[ cut here ]------------
> > [ 35.187552] WARNING: CPU: 0 PID: 605 at drivers/gpu/drm/i915/intel_display.c:8286 check_crtc_state+0x5cf/0xa50 [i915]()
> > [ 35.187556] pipe state doesn't match!
> > [ 35.187558] Modules linked in: ebtable_nat xt_CHECKSUM nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_nat nf_nat_ipv6 ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 tun nf_defrag_ipv6 bridge stp llc iptable_nat nf_nat_ipv4 nf_nat iptable_mangle bnep bluetooth nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_conexant iTCO_wdt iTCO_vendor_support x86_pkg_temp_thermal coretemp kvm_intel kvm snd_hda_intel snd_hda_codec snd_hwdep snd_seq iwlwifi crc32c_intel snd_seq_device ghash_clmulni_intel snd_pcm cfg80211 uvcvideo videobuf2_vmalloc microcode videobuf2_memops videobuf2_core e1000e sdhci_pci videodev pcspkr serio_raw sdhci mmc_core thinkpad_acpi snd_page_alloc i2c_i801 snd_timer ptp snd
> > [ 35.187636] pps_core shpchp lpc_ich mfd_core tpm_tis wmi soundcore tpm rfkill tpm_bios uinput binfmt_misc firewire_ohci firewire_core crc_itu_t i915 i2c_algo_bit drm_kms_helper drm i2c_core video
> > [ 35.187666] CPU: 0 PID: 605 Comm: X Tainted: G W 3.11.0-mst #258
> > [ 35.187670] Hardware name: LENOVO 4243BQ9/4243BQ9, BIOS 8AET57WW (1.37 ) 04/05/2012
> > [ 35.187675] 000000000000205e ffff8801fede7728 ffffffff81647c9b ffff8801fede7768
> > [ 35.187683] ffffffff81056d6c ffff880212201478 0000000000000002 ffff8802144d5000
> > [ 35.187690] 0000000000000001 ffff880212201478 ffff880212201000 ffff8801fede7848
> > [ 35.187697] Call Trace:
> > [ 35.187711] [<ffffffff81647c9b>] dump_stack+0x6a/0x77
> > [ 35.187723] [<ffffffff81056d6c>] warn_slowpath_common+0x8c/0xc0
> > [ 35.187732] [<ffffffff81056e9e>] warn_slowpath_fmt+0x6e/0x70
> > [ 35.187764] [<ffffffffa0084385>] ? i915_read32+0x75/0x130 [i915]
> > [ 35.187789] [<ffffffffa0084385>] ? i915_read32+0x75/0x130 [i915]
> > [ 35.187828] [<ffffffffa00bf275>] ? intel_lvds_get_config+0x45/0xb0 [i915]
> > [ 35.187861] [<ffffffffa00ae6ef>] check_crtc_state+0x5cf/0xa50 [i915]
> > [ 35.187897] [<ffffffffa00b59e5>] intel_modeset_check_state+0x2e5/0x7c0 [i915]
> > [ 35.187929] [<ffffffffa00bc54d>] intel_set_mode+0x2d/0x40 [i915]
> > [ 35.187959] [<ffffffffa00bd338>] intel_crtc_set_config+0x878/0x990 [i915]
> > [ 35.187993] [<ffffffffa003189b>] drm_mode_set_config_internal+0x5b/0xf0 [drm]
> > [ 35.188020] [<ffffffffa0032efe>] drm_mode_setcrtc+0x31e/0x5e0 [drm]
> > [ 35.188044] [<ffffffffa002163a>] drm_ioctl+0x3da/0x660 [drm]
> > [ 35.188075] [<ffffffffa0032be0>] ? drm_mode_create+0x70/0x70 [drm]
> > [ 35.188084] [<ffffffff812963aa>] ? file_has_perm+0xaa/0xb0
> > [ 35.188147] [<ffffffffa00ebbc5>] i915_compat_ioctl+0x45/0x50 [i915]
> > [ 35.188158] [<ffffffff811e6336>] compat_sys_ioctl+0x106/0x13a0
> > [ 35.188168] [<ffffffff811930d8>] ? fsnotify_access+0x68/0x80
> > [ 35.188176] [<ffffffff81193958>] ? vfs_read+0xd8/0x130
> > [ 35.188183] [<ffffffff810dd9bb>] ? __audit_syscall_exit+0x23b/0x2e0
> > [ 35.188193] [<ffffffff81656875>] sysenter_dispatch+0x7/0x1a
> > [ 35.188198] ---[ end trace da13b750719727e2 ]---
> > [ 35.188202] [drm:intel_dump_pipe_config], [CRTC:3][hw state] config for pipe A
> > [ 35.188207] [drm:intel_dump_pipe_config], cpu_transcoder: A
> > [ 35.188210] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
> > [ 35.188214] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
> > [ 35.188220] [drm:intel_dump_pipe_config], requested mode:
> > [ 35.188224] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1280 0 0 0 1024 0 0 0 0x0 0x0
> > [ 35.188231] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 35.188234] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
> > [ 35.188239] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 35.188244] [drm:intel_dump_pipe_config], pch pfit: pos: 0x011d0000, size: 0x05460438
> > [ 35.188248] [drm:intel_dump_pipe_config], ips: 0
> > [ 35.188251] [drm:intel_dump_pipe_config], [CRTC:3][sw state] config for pipe A
> > [ 35.188255] [drm:intel_dump_pipe_config], cpu_transcoder: A
> > [ 35.188258] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
> > [ 35.188262] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
> > [ 35.188311] [drm:intel_dump_pipe_config], requested mode:
> > [ 35.188314] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
> > [ 35.188320] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 35.188323] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 139000 1920 1980 2028 2050 1080 1090 1100 1130 0x0 0x5
> > [ 35.188329] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 35.188333] [drm:intel_dump_pipe_config], pch pfit: pos: 0x011d0000, size: 0x05460438
> > [ 35.188337] [drm:intel_dump_pipe_config], ips: 0
> > [ 35.188340] [drm:check_crtc_state], [CRTC:5]
> > [ 35.188363] [drm:check_shared_dpll_state], PCH DPLL A
> > [ 35.188395] [drm:check_shared_dpll_state], PCH DPLL B
> > [ 36.913619] [drm:asle_set_backlight], bclp = 0x800000ff
> > [ 36.913625] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> > [ 36.913627] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
> > [ 36.913629] [drm:asle_set_pwm_freq], PWM freq is not supported
> > [ 36.914907] [drm:asle_set_backlight], bclp = 0x800000ff
> > [ 36.914911] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
> > [ 36.914913] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
> > [ 36.914915] [drm:asle_set_pwm_freq], PWM freq is not supported
> > [ 42.123964] systemd-journald[213]: File /var/log/journal/2b6e810f801e4f458fa97f9a3b9c8a3e/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
> > [ 44.837333] [drm:intel_crtc_cursor_set], cursor off
> > [ 44.837350] [drm:intel_crtc_cursor_set], cursor off
> > [ 45.027988] [drm:intel_crtc_cursor_set], cursor off
> > [ 45.027998] [drm:intel_crtc_cursor_set], cursor off
> > [ 45.073569] [drm:intel_crtc_cursor_set], cursor off
> > [ 45.073577] [drm:intel_crtc_cursor_set], cursor off
> > [ 45.278491] [drm:intel_crtc_cursor_set], cursor off
> > [ 45.278504] [drm:intel_crtc_cursor_set], cursor off
> > [ 45.542351] [drm:intel_crtc_cursor_set], cursor off
> > [ 45.542369] [drm:intel_crtc_cursor_set], cursor off
> > [ 57.431075] [drm:intel_crtc_cursor_set], cursor off
> > [ 57.431092] [drm:intel_crtc_cursor_set], cursor off
> > [ 58.313538] [drm:intel_crtc_cursor_set], cursor off
> > [ 58.313555] [drm:intel_crtc_cursor_set], cursor off
> > [ 59.545153] [drm:intel_crtc_cursor_set], cursor off
> > [ 59.545171] [drm:intel_crtc_cursor_set], cursor off
> > [ 67.663884] [drm:intel_crtc_cursor_set], cursor off
> > [ 67.663983] [drm:intel_crtc_cursor_set], cursor off
> > [ 74.810144] [drm:intel_crtc_cursor_set], cursor off
> > [ 74.810159] [drm:intel_crtc_cursor_set], cursor off
> > [ 78.400204] [drm:intel_crtc_cursor_set], cursor off
> > [ 78.400225] [drm:intel_crtc_cursor_set], cursor off
> > [ 79.914106] [drm:intel_crtc_cursor_set], cursor off
> > [ 79.914123] [drm:intel_crtc_cursor_set], cursor off
> > [ 80.753957] [drm:intel_crtc_cursor_set], cursor off
> > [ 80.753975] [drm:intel_crtc_cursor_set], cursor off
> > [ 82.211369] [drm:intel_crtc_cursor_set], cursor off
> > [ 82.211386] [drm:intel_crtc_cursor_set], cursor off
>
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2013-09-29 6:28 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-07-01 8:49 linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ] Sedat Dilek
2013-07-01 8:52 ` Daniel Vetter
2013-07-01 9:03 ` Sedat Dilek
2013-07-02 5:31 ` Sedat Dilek
[not found] ` <CA+icZUW3K7RyUcfdos7aOkrEOd3To0kSns+G3GSfkPqqwo7z=w@mail.gmail.com>
2013-08-26 13:05 ` Fwd: " Michael S. Tsirkin
2013-08-26 17:28 ` (unknown) Michael S. Tsirkin
2013-09-22 14:14 ` Fwd: linux-next: Tree for Jul 1 [ drm-intel-next: Several call-traces ] Michael S. Tsirkin
2013-09-25 3:17 ` Dave Airlie
2013-09-25 7:56 ` Daniel Vetter
2013-09-25 8:19 ` Michael S. Tsirkin
2013-09-25 15:34 ` Michael S. Tsirkin
2013-09-25 15:48 ` [Intel-gfx] " Daniel Vetter
2013-09-29 6:28 ` Michael S. Tsirkin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).