From: Sedat Dilek <sedat.dilek@gmail.com>
To: Christoph Lameter <cl@linux.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>,
Tony Luck <tony.luck@intel.com>,
linux-next@vger.kernel.org, Pekka Enberg <penberg@kernel.org>
Subject: Re: ia64 dies in slab code on next-20120906
Date: Sat, 8 Sep 2012 23:34:50 +0200 [thread overview]
Message-ID: <CA+icZUVuC+70S_zDRpNyBNvr+83Nb3J6qyGWteTDxrkvG=BAsw@mail.gmail.com> (raw)
In-Reply-To: <00000139a722a761-bafedf19-81a0-4922-a522-a2bb0fbb951a-000000@email.amazonses.com>
[-- Attachment #1: Type: text/plain, Size: 2875 bytes --]
On Sat, Sep 8, 2012 at 8:27 PM, Christoph Lameter <cl@linux.com> wrote:
> Thanks Tony for the additional information regarding the pointer. That got
> me thinking about something different.
>
> Try the following fix:
>
> Subject: slub: Zero initial memory segment for kmem_cache and kmem_cache_node
>
> Earlier patches in the common set moved the zeroing of the kmem_cache structure
> into common code. See "Move allocation of kmem_cache into common code".
>
> The allocation for the two special structures is still done
> from slub specific code but no zeroing is done since the cache creation functions
> used to zero. This now needs to be updated so that the structures
> are zeroed during allocation in kmem_cache_init().
> Otherwise random pointer values may be followed.
>
> Signed-off-by: Christoph Lameter <cl@linux.com>
>
Hi,
I have reported the breakage of Linux-Next (next-20120906)
independently on AMD64 [1], but seem to be ignored in this thread.
On my 8th run of git-bisect, I saw the email of Tony and decided to
try a revert of all "slab/common-for-cgroups" commits on top of
"slab/next" (this has not changed and known to be good the day before
in next-20120905).
To say in other words this issue took a lot of my free-time on Thursday.
Dis you test SLAB-only?
Can you please test next time also with a SLUB config?
The next day you removed "slab/common-for-cgroups" from slab/next, why?
You knew that it was broken (before Tony reported IA64 boot problems)?
On linux-mm/linux-next/LKML MLs I have not read any hints/reports
before the one of Tony.
Can you please inform people in time?
I know linux-next is highly experimental, but I use all my
daily-builds on my system here.
Not virtual machine - on real bare metal!
Feel free to add as it fixes the reported issue:
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Regards,
- Sedat -
P.S.: dmesg and patchset attached!
[1] http://marc.info/?t=134693217300006&r=1&w=2
> Index: linux/mm/slub.c
> ===================================================================
> --- linux.orig/mm/slub.c 2012-09-08 13:21:33.523056357 -0500
> +++ linux/mm/slub.c 2012-09-08 13:22:12.483056947 -0500
> @@ -3705,7 +3705,7 @@
> /* Allocate two kmem_caches from the page allocator */
> kmalloc_size = ALIGN(kmem_size, cache_line_size());
> order = get_order(2 * kmalloc_size);
> - kmem_cache = (void *)__get_free_pages(GFP_NOWAIT, order);
> + kmem_cache = (void *)__get_free_pages(GFP_NOWAIT|__GFP_ZERO, order);
>
> /*
> * Must first have the slab cache available for the allocations of the
> --
> To unsubscribe from this list: send the line "unsubscribe linux-next" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
[-- Attachment #2: dmesg_3.6.0-rc4-next20120906-4-iniza-generic.txt --]
[-- Type: text/plain, Size: 55735 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.0-rc4-next20120906-4-iniza-generic (sedat.dilek@gmail.com@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Sat Sep 8 23:08:05 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.6.0-rc4-next20120906-4-iniza-generic root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro init=/lib/systemd/systemd
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 09XK 08/03/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask FE0000000 write-back
[ 0.000000] 6 base 11FE00000 mask FFFE00000 uncachable
[ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xdaffffff]
[ 0.000000] [mem 0x00000000-0xdaffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xdaffffff @ [mem 0x1f923000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fdfffff]
[ 0.000000] [mem 0x100000000-0x11fdfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x11fdfffff @ [mem 0xd9c99000-0xd9c9efff]
[ 0.000000] RAMDISK: [mem 0x36494000-0x37241fff]
[ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
[ 0.000000] ACPI: XSDT 00000000daffe120 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000dafef000 000F4 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000daff2000 082E8 (v02 SECCSD SNB-CPT 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000daf47000 00040
[ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000dafed000 00098 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01 Iffs IffsAsl 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff]
[ 0.000000] NODE_DATA [mem 0x11fdfc000-0x11fdfffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b400000-ffff88011f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xd9c9efff]
[ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x11fdfffff]
[ 0.000000] On node 0 totalpages: 1021485
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 870624 pages, LIFO batch:31
[ 0.000000] Normal zone: 2040 pages used for memmap
[ 0.000000] Normal zone: 128520 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000
[ 0.000000] PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000
[ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
[ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fa00000 s84736 r8192 d21760 u262144
[ 0.000000] pcpu-alloc: s84736 r8192 d21760 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003055
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.6.0-rc4-next20120906-4-iniza-generic root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro init=/lib/systemd/systemd
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3923648k/4716544k available (6419k kernel code, 630604k absent, 162292k reserved, 6729k data, 924k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1596.378 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.75 BogoMIPS (lpj=6385512)
[ 0.000009] pid_max: default: 32768 minimum: 301
[ 0.000034] Security Framework initialized
[ 0.000048] AppArmor: AppArmor initialized
[ 0.000388] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001421] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001866] Mount-cache hash table entries: 256
[ 0.002066] Initializing cgroup subsys cpuacct
[ 0.002071] Initializing cgroup subsys devices
[ 0.002074] Initializing cgroup subsys freezer
[ 0.002077] Initializing cgroup subsys blkio
[ 0.002079] Initializing cgroup subsys perf_event
[ 0.002105] Disabled fast string operations
[ 0.002108] CPU: Physical Processor ID: 0
[ 0.002110] CPU: Processor Core ID: 0
[ 0.002117] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.002117] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002123] mce: CPU supports 7 MCE banks
[ 0.002137] CPU0: Thermal monitoring enabled (TM1)
[ 0.002145] process: using mwait in idle threads
[ 0.002150] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.002150] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.002150] tlb_flushall_shift: 5
[ 0.002247] Freeing SMP alternatives: 20k freed
[ 0.004329] ACPI: Core revision 20120711
[ 0.011451] ftrace: allocating 24616 entries in 97 pages
[ 0.025148] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064809] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz stepping 07
[ 0.172243] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.172253] ... version: 3
[ 0.172255] ... bit width: 48
[ 0.172257] ... generic registers: 4
[ 0.172259] ... value mask: 0000ffffffffffff
[ 0.172262] ... max period: 000000007fffffff
[ 0.172264] ... fixed-purpose events: 3
[ 0.172266] ... event mask: 000000070000000f
[ 0.183578] Disabled fast string operations
[ 0.185803] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.196924] Disabled fast string operations
[ 0.210177] Disabled fast string operations
[ 0.172537] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.212305] Brought up 4 CPUs
[ 0.212313] smpboot: Total of 4 processors activated (12771.02 BogoMIPS)
[ 0.216107] devtmpfs: initialized
[ 0.217025] EVM: security.selinux
[ 0.217028] EVM: security.SMACK64
[ 0.217030] EVM: security.capability
[ 0.217072] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
[ 0.218028] regulator-dummy: no parameters
[ 0.218064] RTC time: 23:17:56, date: 09/08/12
[ 0.218102] NET: Registered protocol family 16
[ 0.218249] ACPI: bus type pci registered
[ 0.218317] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.218323] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.225723] PCI: Using configuration type 1 for base access
[ 0.226572] bio: create slab <bio-0> at 0
[ 0.226648] ACPI: Added _OSI(Module Device)
[ 0.226651] ACPI: Added _OSI(Processor Device)
[ 0.226654] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.226657] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.228161] ACPI: EC: Look up EC in DSDT
[ 0.240263] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.242846] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.244127] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.244527] ACPI: Dynamic OEM Table Load:
[ 0.244531] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.244813] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.245237] ACPI: Dynamic OEM Table Load:
[ 0.245241] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.245372] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.245758] ACPI: Dynamic OEM Table Load:
[ 0.245761] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.247424] ACPI: Interpreter enabled
[ 0.247430] ACPI: (supports S0 S1 S3 S5)
[ 0.247451] ACPI: Using IOAPIC for interrupt routing
[ 0.252383] ACPI: Power Resource [FN00] (off)
[ 0.252458] ACPI: Power Resource [FN01] (off)
[ 0.252530] ACPI: Power Resource [FN02] (off)
[ 0.252601] ACPI: Power Resource [FN03] (off)
[ 0.252671] ACPI: Power Resource [FN04] (off)
[ 0.252970] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.253145] ACPI: No dock devices found.
[ 0.253150] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.253545] \_SB_.PCI0:_OSC invalid UUID
[ 0.253546] _OSC request data:1 8 1f
[ 0.253550] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.253982] PCI host bridge to bus 0000:00
[ 0.253988] pci_bus 0000:00: busn_res: [bus 00-3e] is inserted under domain [bus 00-ff]
[ 0.253990] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.253993] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.253997] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.254000] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.254003] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.254007] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.254018] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.254059] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.254071] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.254078] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.254083] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f]
[ 0.254145] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.254170] pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit]
[ 0.254252] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.254292] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.254315] pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff]
[ 0.254413] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.254442] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.254459] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit]
[ 0.254534] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.254561] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.254646] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.254677] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.254762] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.254794] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.254923] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.254969] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.254993] pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff]
[ 0.255090] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.255119] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.255252] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.255273] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f]
[ 0.255282] pci 0000:00:1f.2: reg 14: [io 0x3094-0x3097]
[ 0.255291] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087]
[ 0.255300] pci 0000:00:1f.2: reg 1c: [io 0x3090-0x3093]
[ 0.255309] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f]
[ 0.255319] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff]
[ 0.255368] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.255389] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.255406] pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit]
[ 0.255429] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.255508] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-3e]
[ 0.255671] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
[ 0.255851] pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit]
[ 0.256579] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.264332] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.264340] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.264393] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-3e]
[ 0.264476] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.264546] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.264662] pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref]
[ 0.264733] pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]
[ 0.265063] pci 0000:02:00.0: supports D1 D2
[ 0.265064] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.272239] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.272252] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.272278] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.272348] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-3e]
[ 0.272410] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.272447] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit]
[ 0.272644] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.280227] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.280245] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.280286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.280393] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.280429] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.280459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.280592] \_SB_.PCI0:_OSC invalid UUID
[ 0.280594] _OSC request data:1 1f 1f
[ 0.280597] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.280602] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.283298] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.283349] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.283399] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.283446] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.283492] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[ 0.283540] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.283588] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.283635] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[ 0.283727] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.283735] vgaarb: loaded
[ 0.283737] vgaarb: bridge control possible 0000:00:02.0
[ 0.283874] SCSI subsystem initialized
[ 0.283877] ACPI: bus type scsi registered
[ 0.283920] libata version 3.00 loaded.
[ 0.283938] ACPI: bus type usb registered
[ 0.283954] usbcore: registered new interface driver usbfs
[ 0.283964] usbcore: registered new interface driver hub
[ 0.283984] usbcore: registered new device driver usb
[ 0.284052] PCI: Using ACPI for IRQ routing
[ 0.285726] PCI: pci_cache_line_size set to 64 bytes
[ 0.285845] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.285847] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
[ 0.285849] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.285850] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[ 0.285932] NetLabel: Initializing
[ 0.285935] NetLabel: domain hash size = 128
[ 0.285937] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.285947] NetLabel: unlabeled traffic allowed by default
[ 0.286003] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.286011] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.288024] Switching to clocksource hpet
[ 0.293079] AppArmor: AppArmor Filesystem Enabled
[ 0.293107] pnp: PnP ACPI init
[ 0.293122] ACPI: bus type pnp registered
[ 0.293380] pnp 00:00: [bus 00-3e]
[ 0.293384] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.293386] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.293387] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.293389] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.293391] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.293393] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.293394] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.293396] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.293397] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.293399] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.293401] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.293402] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.293404] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.293405] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.293407] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.293409] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.293410] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.293412] pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
[ 0.293413] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.293480] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.293684] pnp 00:01: [io 0x0000-0x001f]
[ 0.293686] pnp 00:01: [io 0x0081-0x0091]
[ 0.293687] pnp 00:01: [io 0x0093-0x009f]
[ 0.293689] pnp 00:01: [io 0x00c0-0x00df]
[ 0.293691] pnp 00:01: [dma 4]
[ 0.293781] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.293789] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.293808] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.293879] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.293897] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.293906] pnp 00:04: [io 0x00f0]
[ 0.293915] pnp 00:04: [irq 13]
[ 0.293934] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.293944] pnp 00:05: [io 0x002e-0x002f]
[ 0.293946] pnp 00:05: [io 0x004e-0x004f]
[ 0.293947] pnp 00:05: [io 0x0061]
[ 0.293949] pnp 00:05: [io 0x0063]
[ 0.293950] pnp 00:05: [io 0x0065]
[ 0.293951] pnp 00:05: [io 0x0067]
[ 0.293953] pnp 00:05: [io 0x0070]
[ 0.293954] pnp 00:05: [io 0x0080]
[ 0.293955] pnp 00:05: [io 0x0092]
[ 0.293957] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.293958] pnp 00:05: [io 0x0680-0x069f]
[ 0.293960] pnp 00:05: [io 0x1000-0x100f]
[ 0.293961] pnp 00:05: [io 0x5000-0x5003]
[ 0.293964] pnp 00:05: [io 0xffff]
[ 0.293966] pnp 00:05: [io 0x0400-0x0453]
[ 0.293967] pnp 00:05: [io 0x0458-0x047f]
[ 0.293968] pnp 00:05: [io 0x0500-0x057f]
[ 0.293970] pnp 00:05: [io 0x0a00-0x0a0f]
[ 0.293971] pnp 00:05: [io 0x164e-0x164f]
[ 0.293973] pnp 00:05: [io 0x5000-0x500f]
[ 0.294010] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.294014] system 00:05: [io 0x1000-0x100f] has been reserved
[ 0.294018] system 00:05: [io 0x5000-0x5003] has been reserved
[ 0.294021] system 00:05: [io 0xffff] has been reserved
[ 0.294024] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.294028] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.294031] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.294034] system 00:05: [io 0x0a00-0x0a0f] has been reserved
[ 0.294037] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.294041] system 00:05: [io 0x5000-0x500f] could not be reserved
[ 0.294045] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.294052] pnp 00:06: [io 0x0070-0x0077]
[ 0.294057] pnp 00:06: [irq 8]
[ 0.294076] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.294102] pnp 00:07: [io 0x0454-0x0457]
[ 0.294129] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.294133] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.294146] pnp 00:08: [io 0x0060]
[ 0.294148] pnp 00:08: [io 0x0064]
[ 0.294152] pnp 00:08: [irq 1]
[ 0.294172] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.294200] pnp 00:09: [irq 12]
[ 0.294220] pnp 00:09: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[ 0.294344] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.294346] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 0.294347] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.294349] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.294350] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
[ 0.294352] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.294353] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 0.294355] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.294356] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.294358] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.294359] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.294394] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.294398] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.294402] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.294405] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.294409] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.294412] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.294416] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.294419] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.294423] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.294426] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.294430] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.294778] ACPI Error: Invalid/unsupported resource descriptor: Type 0x00 (20120711/utresrc-650)
[ 0.294822] pnp 00:0b: can't evaluate _CRS: 12311
[ 0.294906] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.294930] pnp: PnP ACPI: found 12 devices
[ 0.294933] ACPI: ACPI bus type pnp unregistered
[ 0.301385] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.301394] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.301407] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.301412] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.301422] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.301431] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.301438] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.301478] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.301480] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.301481] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.301483] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.301485] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.301487] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[ 0.301489] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.301490] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.301492] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.301525] NET: Registered protocol family 2
[ 0.302191] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.304040] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.304277] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.304319] TCP: reno registered
[ 0.304330] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.304353] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.304436] NET: Registered protocol family 1
[ 0.304452] pci 0000:00:02.0: Boot video device
[ 0.304633] PCI: CLS 64 bytes, default 64
[ 0.304674] Trying to unpack rootfs image as initramfs...
[ 0.587990] Freeing initrd memory: 14008k freed
[ 0.591166] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.591175] software IO TLB [mem 0xd5c99000-0xd9c98fff] (64MB) mapped at [ffff8800d5c99000-ffff8800d9c98fff]
[ 0.591616] audit: initializing netlink socket (disabled)
[ 0.591636] type=2000 audit(1347146276.476:1): initialized
[ 0.620162] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.621575] VFS: Disk quotas dquot_6.5.2
[ 0.621616] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.621938] fuse init (API version 7.20)
[ 0.622005] msgmni has been set to 7690
[ 0.622348] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.622377] io scheduler noop registered
[ 0.622382] io scheduler deadline registered (default)
[ 0.622405] io scheduler cfq registered
[ 0.622615] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.622634] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.622675] intel_idle: MWAIT substates: 0x21120
[ 0.622676] intel_idle: v0.4 model 0x2A
[ 0.622677] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.623248] ACPI: AC Adapter [ADP1] (on-line)
[ 0.623525] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.623862] ACPI: Lid Switch [LID0]
[ 0.623902] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.623909] ACPI: Power Button [PWRB]
[ 0.623943] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.623948] ACPI: Power Button [PWRF]
[ 0.624003] ACPI: Fan [FAN0] (off)
[ 0.624033] ACPI: Fan [FAN1] (off)
[ 0.624058] ACPI: Fan [FAN2] (off)
[ 0.624083] ACPI: Fan [FAN3] (off)
[ 0.624108] ACPI: Fan [FAN4] (off)
[ 0.624155] ACPI: Requesting acpi_cpufreq
[ 0.629999] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.630004] ACPI: Thermal Zone [TZ00] (72 C)
[ 0.630159] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.630162] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.630190] GHES: HEST is not enabled!
[ 0.630329] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.633760] Linux agpgart interface v0.103
[ 0.635458] brd: module loaded
[ 0.636029] ACPI: Battery Slot [BAT1] (battery present)
[ 0.636309] loop: module loaded
[ 0.636395] ahci 0000:00:1f.2: version 3.0
[ 0.636458] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 0.636497] ahci: SSS flag set, parallel bus scan disabled
[ 0.651823] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[ 0.651838] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.651854] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.676178] scsi0 : ahci
[ 0.676247] scsi1 : ahci
[ 0.676307] scsi2 : ahci
[ 0.676363] scsi3 : ahci
[ 0.676417] scsi4 : ahci
[ 0.676471] scsi5 : ahci
[ 0.676504] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 40
[ 0.676510] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 40
[ 0.676513] ata3: DUMMY
[ 0.676517] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 40
[ 0.676522] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 40
[ 0.676525] ata6: DUMMY
[ 0.676757] libphy: Fixed MDIO Bus: probed
[ 0.676793] tun: Universal TUN/TAP device driver, 1.6
[ 0.676795] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.676835] PPP generic driver version 2.4.2
[ 0.676888] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.676925] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.676928] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.676937] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.680851] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.680861] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.680876] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf070a000
[ 0.691766] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.691823] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.691832] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.691847] usb usb1: Product: EHCI Host Controller
[ 0.691850] usb usb1: Manufacturer: Linux 3.6.0-rc4-next20120906-4-iniza-generic ehci_hcd
[ 0.691854] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.691954] hub 1-0:1.0: USB hub found
[ 0.691960] hub 1-0:1.0: 2 ports detected
[ 0.692027] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.692030] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.692036] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.695946] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.695956] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.695969] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0709000
[ 0.707755] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.707800] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.707809] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.707819] usb usb2: Product: EHCI Host Controller
[ 0.707834] usb usb2: Manufacturer: Linux 3.6.0-rc4-next20120906-4-iniza-generic ehci_hcd
[ 0.707838] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.707925] hub 2-0:1.0: USB hub found
[ 0.707929] hub 2-0:1.0: 2 ports detected
[ 0.707976] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.707991] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.708032] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.708038] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 0.717724] xhci_hcd 0000:03:00.0: irq 16, io mem 0xf0500000
[ 0.717792] xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
[ 0.717797] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[ 0.717803] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[ 0.717807] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[ 0.717812] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 0.717918] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.717922] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.717926] usb usb3: Product: xHCI Host Controller
[ 0.717929] usb usb3: Manufacturer: Linux 3.6.0-rc4-next20120906-4-iniza-generic xhci_hcd
[ 0.717932] usb usb3: SerialNumber: 0000:03:00.0
[ 0.717992] xHCI xhci_add_endpoint called for root hub
[ 0.717994] xHCI xhci_check_bandwidth called for root hub
[ 0.718013] hub 3-0:1.0: USB hub found
[ 0.718022] hub 3-0:1.0: 2 ports detected
[ 0.718072] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.718077] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 0.718114] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.718117] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.718121] usb usb4: Product: xHCI Host Controller
[ 0.718124] usb usb4: Manufacturer: Linux 3.6.0-rc4-next20120906-4-iniza-generic xhci_hcd
[ 0.718128] usb usb4: SerialNumber: 0000:03:00.0
[ 0.718179] xHCI xhci_add_endpoint called for root hub
[ 0.718180] xHCI xhci_check_bandwidth called for root hub
[ 0.718200] hub 4-0:1.0: USB hub found
[ 0.718208] hub 4-0:1.0: 2 ports detected
[ 0.718340] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[ 0.726266] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.726273] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.726390] mousedev: PS/2 mouse device common for all mice
[ 0.726808] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.726839] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.726901] device-mapper: uevent: version 1.0.3
[ 0.726957] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[ 0.727026] cpuidle: using governor ladder
[ 0.727118] cpuidle: using governor menu
[ 0.727121] EFI Variables Facility v0.08 2004-May-17
[ 0.727287] ashmem: initialized
[ 0.727398] TCP: cubic registered
[ 0.727484] NET: Registered protocol family 10
[ 0.727640] NET: Registered protocol family 17
[ 0.727662] Key type dns_resolver registered
[ 0.728038] PM: Hibernation image not present or could not be loaded.
[ 0.728049] registered taskstats version 1
[ 0.730873] Key type trusted registered
[ 0.733139] Key type encrypted registered
[ 0.734714] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.735570] Magic number: 12:778:301
[ 0.735606] tty tty30: hash matches
[ 0.735677] rtc_cmos 00:06: setting system clock to 2012-09-08 23:17:57 UTC (1347146277)
[ 0.736399] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.736403] EDD information not available.
[ 0.995646] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.996845] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[ 0.996863] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.998101] ata1.00: configured for UDMA/133
[ 0.998355] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[ 0.998532] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.998536] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.998545] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.998685] sd 0:0:0:0: [sda] Write Protect is off
[ 0.998692] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 10
[ 0.998792] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.003581] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.008731] sda: sda1 sda2 sda3
[ 1.009561] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.135926] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.135944] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.136351] hub 1-1:1.0: USB hub found
[ 1.136532] hub 1-1:1.0: 6 ports detected
[ 1.247466] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.315419] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.316003] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133
[ 1.316019] ata2.00: 31277232 sectors, multi 1: LBA48
[ 1.316687] ata2.00: configured for UDMA/133
[ 1.316910] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5
[ 1.317077] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.317081] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 1.317326] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.317333] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 10
[ 1.317455] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.318501] sdb: sdb1 sdb2
[ 1.318982] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.379750] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.379768] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.380187] hub 2-1:1.0: USB hub found
[ 1.380358] hub 2-1:1.0: 6 ports detected
[ 1.451457] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
[ 1.549553] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e
[ 1.549571] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.549583] usb 1-1.2: Product: USB-PS/2 Optical Mouse
[ 1.549591] usb 1-1.2: Manufacturer: Logitech
[ 1.587173] tsc: Refined TSC clocksource calibration: 1596.372 MHz
[ 1.587194] Switching to clocksource tsc
[ 1.619323] usb 1-1.4: new high-speed USB device number 4 using ehci_hcd
[ 1.635169] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.871302] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018
[ 1.871320] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.871331] usb 1-1.4: Product: WebCam SC-13HDL11431N
[ 1.871339] usb 1-1.4: Manufacturer: 123
[ 1.954955] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.956884] Freeing unused kernel memory: 924k freed
[ 1.957029] Write protecting the kernel read-only data: 12288k
[ 1.962102] Freeing unused kernel memory: 1764k freed
[ 1.965692] Freeing unused kernel memory: 1232k freed
[ 1.982003] udevd[119]: starting version 175
[ 2.033272] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.033551] r8169 0000:02:00.0: irq 46 for MSI/MSI-X
[ 2.033816] r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xffffc9000066a000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 46
[ 2.033826] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.037526] usbcore: registered new interface driver usbhid
[ 2.037534] usbhid: USB HID core driver
[ 2.114941] usb 2-1.5: new full-speed USB device number 3 using ehci_hcd
[ 2.210726] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
[ 2.210744] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.981843] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 5.455810] udevd[304]: starting version 175
[ 5.780841] lp: driver loaded but no devices found
[ 6.280059] tty_init_dev: 9 callbacks suppressed
[ 6.299078] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[ 7.410670] mei 0000:00:16.0: setting latency timer to 64
[ 7.410732] mei 0000:00:16.0: irq 47 for MSI/MSI-X
[ 7.415979] mei 0000:00:16.0: wd: failed to find the client
[ 7.522298] wmi: Mapper loaded
[ 7.525013] samsung_laptop: detected SABI interface: SwSmi@
[ 7.525016] samsung_laptop: Backlight controlled by ACPI video driver
[ 7.583381] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
[ 7.583392] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.583397] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
[ 7.583402] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.583404] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.776432] cfg80211: Calling CRDA to update world regulatory domain
[ 7.776669] Bluetooth: Core ver 2.16
[ 7.776687] NET: Registered protocol family 31
[ 7.776689] Bluetooth: HCI device and connection manager initialized
[ 7.776697] Bluetooth: HCI socket layer initialized
[ 7.776701] Bluetooth: L2CAP socket layer initialized
[ 7.776708] Bluetooth: SCO socket layer initialized
[ 7.806499] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[ 8.074090] usbcore: registered new interface driver btusb
[ 8.498933] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 8.498937] Copyright(c) 2003-2012 Intel Corporation
[ 8.499073] iwlwifi 0000:01:00.0: pci_resource_len = 0x00002000
[ 8.499077] iwlwifi 0000:01:00.0: pci_resource_base = ffffc9000066c000
[ 8.499080] iwlwifi 0000:01:00.0: HW Revision ID = 0x34
[ 8.499281] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X
[ 8.530168] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[ 8.531497] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[ 8.532603] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[ 8.533728] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 8.540088] [drm] Initialized drm 1.1.0 20060810
[ 8.763722] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[ 8.764660] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[ 9.007500] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[ 9.021813] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1
[ 9.024064] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[ 9.110176] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[ 9.135338] Linux video capture interface: v2.00
[ 9.510536] pci 0000:00:00.0: Intel Sandybridge Chipset
[ 9.510623] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 9.511707] pci 0000:00:00.0: detected 65536K stolen memory
[ 9.511757] i915 0000:00:02.0: setting latency timer to 64
[ 9.549438] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[ 9.549447] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 9.549449] [drm] Driver supports precise vblank timestamp query.
[ 9.549495] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 9.699133] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[ 9.718431] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6
[ 9.718519] usbcore: registered new interface driver uvcvideo
[ 9.718521] USB Video Class driver (1.1.1)
[ 9.738327] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 9.738332] iwldvm: Copyright(c) 2003-2012 Intel Corporation
[ 9.738356] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 9.738359] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 9.738360] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 9.738362] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[ 9.738363] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
[ 9.738366] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[ 9.738480] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 9.753915] iwlwifi 0000:01:00.0: device EEPROM VER=0x716, CALIB=0x6
[ 9.753919] iwlwifi 0000:01:00.0: Device SKU: 0x1F0
[ 9.753922] iwlwifi 0000:01:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
[ 9.754013] Registered led device: phy0-led
[ 9.754045] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 9.837623] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 10.127869] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 10.127873] cfg80211: World regulatory domain updated:
[ 10.127874] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.127876] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.127878] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.127879] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.127880] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.127881] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.174167] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 10.332616] type=1400 audit(1347146287.100:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=562 comm="apparmor_parser"
[ 10.369300] fbcon: inteldrmfb (fb0) is primary device
[ 10.385364] type=1400 audit(1347146287.152:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=563 comm="apparmor_parser"
[ 10.385996] type=1400 audit(1347146287.152:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=563 comm="apparmor_parser"
[ 10.386217] type=1400 audit(1347146287.152:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=563 comm="apparmor_parser"
[ 10.422119] type=1400 audit(1347146287.192:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=619 comm="apparmor_parser"
[ 10.422710] type=1400 audit(1347146287.192:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=619 comm="apparmor_parser"
[ 10.453404] type=1400 audit(1347146287.224:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=658 comm="apparmor_parser"
[ 10.453412] type=1400 audit(1347146287.224:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=654 comm="apparmor_parser"
[ 10.454026] type=1400 audit(1347146287.224:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=654 comm="apparmor_parser"
[ 10.544873] Console: switching to colour frame buffer device 170x48
[ 10.547529] fb0: inteldrmfb frame buffer device
[ 10.547530] drm: registered panic notifier
[ 10.557653] acpi device:33: registered as cooling_device9
[ 10.557805] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.557852] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 10.558026] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 10.558161] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 10.866305] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 10.866429] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 10.866526] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.914952] type=1400 audit(1347146287.684:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=564 comm="apparmor_parser"
[ 12.771121] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:0 extents:1 across:262140k
[ 12.771450] tty_init_dev: 26 callbacks suppressed
[ 16.423150] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 16.429848] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 16.723691] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 16.730334] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 16.840621] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.301959] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
[ 23.371306] wlan0: authenticate with 00:04:0e:e4:00:3d
[ 23.380516] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[ 23.382212] wlan0: authenticated
[ 23.382325] iwlwifi 0000:01:00.0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 23.382329] iwlwifi 0000:01:00.0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 23.383712] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[ 23.387284] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=2)
[ 23.391227] wlan0: associated
[ 23.391703] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 47.257105] usb 2-1.5: USB disconnect, device number 3
[ 51.863613] audit_printk_skb: 21 callbacks suppressed
[ 51.863616] type=1400 audit(1347139128.192:19): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/run/user/wearefam/dconf/user" pid=1696 comm="mission-control" requested_mask="rwc" denied_mask="rwc" fsuid=1000 ouid=1000
[ 58.489682] tty_init_dev: 44 callbacks suppressed
[-- Attachment #3: 3.6.0-rc4-next20120906-4-iniza-generic.patch --]
[-- Type: application/octet-stream, Size: 2696 bytes --]
Christoph Lameter (1):
slub: Zero initial memory segment for kmem_cache and kmem_cache_node
Sedat Dilek (6):
kbuild, deb-pkg: Try to determine distribution
kbuild, deb-pkg: Bump year in debian/copyright file
kbuild, deb-pkg: Update git repository URL in debian/copyright file
Merge tag 'next-20120906' of git://git.kernel.org/.../next/linux-next into Linux-Next-v20120906
Merge branch 'deb-pkg-fixes' into 3.6.0-rc4-next20120906-4-iniza-generic
Merge branch 'slab-next-fixes' into 3.6.0-rc4-next20120906-4-iniza-generic
mm/slub.c | 2 +-
scripts/package/builddeb | 19 ++++++++++++++++---
2 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/mm/slub.c b/mm/slub.c
index dafd465..e5d9357 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -3707,7 +3707,7 @@ void __init kmem_cache_init(void)
/* Allocate two kmem_caches from the page allocator */
kmalloc_size = ALIGN(kmem_size, cache_line_size());
order = get_order(2 * kmalloc_size);
- kmem_cache = (void *)__get_free_pages(GFP_NOWAIT, order);
+ kmem_cache = (void *)__get_free_pages(GFP_NOWAIT|__GFP_ZERO, order);
/*
* Must first have the slab cache available for the allocations of the
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index acb8650..586e748 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -172,9 +172,22 @@ else
fi
maintainer="$name <$email>"
+# Try to determine distribution
+if [ -e $(which lsb_release) ]; then
+ codename=$(lsb_release --codename --short)
+ if [ "$codename" != "" ]; then
+ distribution=$codename
+ else
+ distribution="UNRELEASED"
+ echo "WARNING: The distribution could NOT be determined!"
+ fi
+else
+ echo "HINT: Install lsb_release binary, this helps to identify your distribution!"
+fi
+
# Generate a simple changelog template
cat <<EOF > debian/changelog
-linux-upstream ($packageversion) unstable; urgency=low
+linux-upstream ($packageversion) $distribution; urgency=low
* Custom built Linux kernel.
@@ -188,10 +201,10 @@ This is a packacked upstream version of the Linux kernel.
The sources may be found at most Linux ftp sites, including:
ftp://ftp.kernel.org/pub/linux/kernel
-Copyright: 1991 - 2009 Linus Torvalds and others.
+Copyright: 1991 - 2012 Linus Torvalds and others.
The git repository for mainline kernel development is at:
-git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
next prev parent reply other threads:[~2012-09-08 21:34 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-06 18:39 ia64 dies in slab code on next-20120906 Tony Luck
2012-09-06 19:39 ` Sedat Dilek
2012-09-06 20:13 ` Sedat Dilek
2012-09-06 20:13 ` Christoph Lameter
2012-09-06 20:26 ` Luck, Tony
2012-09-06 20:33 ` Christoph Lameter
2012-09-06 20:45 ` Sedat Dilek
2012-09-06 21:00 ` Sedat Dilek
2012-09-07 8:13 ` Sedat Dilek
2012-09-06 23:41 ` Luck, Tony
2012-09-07 1:26 ` Stephen Rothwell
2012-09-08 18:27 ` Christoph Lameter
2012-09-08 21:34 ` Sedat Dilek [this message]
2012-09-08 22:27 ` Christoph Lameter
2012-09-09 6:44 ` Sedat Dilek
2012-09-10 3:24 ` Stephen Rothwell
2012-09-10 6:59 ` Pekka Enberg
2012-09-10 8:28 ` Sedat Dilek
2012-09-10 17:52 ` Luck, Tony
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CA+icZUVuC+70S_zDRpNyBNvr+83Nb3J6qyGWteTDxrkvG=BAsw@mail.gmail.com' \
--to=sedat.dilek@gmail.com \
--cc=cl@linux.com \
--cc=linux-next@vger.kernel.org \
--cc=penberg@kernel.org \
--cc=sfr@canb.auug.org.au \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).