linux-next.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
       [not found] <CA+icZUVWC+Rgd9wh4Z4CPZkEa9Pm2=2udnY5=UD1nnH0Wot1pQ@mail.gmail.com>
@ 2013-04-18 19:48 ` Daniel Vetter
  2013-04-18 21:59   ` Sedat Dilek
  0 siblings, 1 reply; 21+ messages in thread
From: Daniel Vetter @ 2013-04-18 19:48 UTC (permalink / raw)
  To: Sedat Dilek
  Cc: Stephen Rothwell, linux-next, Linux Kernel Mailing List, x86,
	Ingo Molnar, Thomas Gleixner, Paul McKenney, Paul McKenney, DRI,
	Dave Airlie

On Thu, Apr 18, 2013 at 3:05 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> On Thu, Apr 18, 2013 at 10:28 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>> Hi all,
>>
>> Changes since 20130417:
>>
>> New Trees:      rpmsg (actually added yesterday)
>>                 ppc-temp (replacing powerpc for this week)
>>
>> The ceph tree gained a conflict against Linus' tree.
>>
>> The net-next tree gained a conflict against the infiniband tree.
>>
>> The usb tree gained a build failure so I used the version from
>> next-20130417.
>>
>> I added two merge fix patches after the gen-gpio tree.
>>
>> The ppc-temp tree gained a conflict against the metag tree.
>>
>> The akpm tree lost a patch that turned up elsewhere.
>>
>> ----------------------------------------------------------------------------
>>
>
> Not sure what the root-cause for this call-trace is (see screenshot).
>
> This is reproducible when running my kernel build-script (4 parallel-make-jobs).
>
> Any hints welcome!

The panic handlers in our modeset code are pretty decent fubar - they
take mutexes all over the place. So I think the backtrace you see
there is actually a secondary effect. I've looked into fixing this up,
but the issue is that drivers themselves have tons of state protected
with mutexes, which all potentially affects the panic handler. So I've
given up on that for now ...
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
  2013-04-18 19:48 ` linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ] Daniel Vetter
@ 2013-04-18 21:59   ` Sedat Dilek
  2013-04-19 10:19     ` Sedat Dilek
  0 siblings, 1 reply; 21+ messages in thread
From: Sedat Dilek @ 2013-04-18 21:59 UTC (permalink / raw)
  To: Daniel Vetter
  Cc: Stephen Rothwell, linux-next, Linux Kernel Mailing List, x86,
	Ingo Molnar, Thomas Gleixner, Paul McKenney, Paul McKenney, DRI,
	Dave Airlie

On Thu, Apr 18, 2013 at 9:48 PM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote:
> On Thu, Apr 18, 2013 at 3:05 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>> On Thu, Apr 18, 2013 at 10:28 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>>> Hi all,
>>>
>>> Changes since 20130417:
>>>
>>> New Trees:      rpmsg (actually added yesterday)
>>>                 ppc-temp (replacing powerpc for this week)
>>>
>>> The ceph tree gained a conflict against Linus' tree.
>>>
>>> The net-next tree gained a conflict against the infiniband tree.
>>>
>>> The usb tree gained a build failure so I used the version from
>>> next-20130417.
>>>
>>> I added two merge fix patches after the gen-gpio tree.
>>>
>>> The ppc-temp tree gained a conflict against the metag tree.
>>>
>>> The akpm tree lost a patch that turned up elsewhere.
>>>
>>> ----------------------------------------------------------------------------
>>>
>>
>> Not sure what the root-cause for this call-trace is (see screenshot).
>>
>> This is reproducible when running my kernel build-script (4 parallel-make-jobs).
>>
>> Any hints welcome!
>
> The panic handlers in our modeset code are pretty decent fubar - they
> take mutexes all over the place. So I think the backtrace you see
> there is actually a secondary effect. I've looked into fixing this up,
> but the issue is that drivers themselves have tons of state protected
> with mutexes, which all potentially affects the panic handler. So I've
> given up on that for now ...

Thanks for taking care.

On suspicion [1] I have reverted [2]... NOPE.

- Sedat -

[1] http://marc.info/?l=linux-kernel&m=136631921208895&w=2
[2] http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/?id=5a90d1a95356de7a32acb2e5309ac579a891af8f

> -Daniel
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
  2013-04-18 21:59   ` Sedat Dilek
@ 2013-04-19 10:19     ` Sedat Dilek
       [not found]       ` <CA+icZUXjTGSG+tejOAFgXr8EpKd7dL=-W41ha_-0N=roAxN3eg@mail.gmail.com>
  0 siblings, 1 reply; 21+ messages in thread
From: Sedat Dilek @ 2013-04-19 10:19 UTC (permalink / raw)
  To: Daniel Vetter
  Cc: Stephen Rothwell, linux-next, Linux Kernel Mailing List, x86,
	Ingo Molnar, Thomas Gleixner, Paul McKenney, Paul McKenney, DRI,
	Dave Airlie

On Thu, Apr 18, 2013 at 11:59 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> On Thu, Apr 18, 2013 at 9:48 PM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote:
>> On Thu, Apr 18, 2013 at 3:05 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>>> On Thu, Apr 18, 2013 at 10:28 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>>>> Hi all,
>>>>
>>>> Changes since 20130417:
>>>>
>>>> New Trees:      rpmsg (actually added yesterday)
>>>>                 ppc-temp (replacing powerpc for this week)
>>>>
>>>> The ceph tree gained a conflict against Linus' tree.
>>>>
>>>> The net-next tree gained a conflict against the infiniband tree.
>>>>
>>>> The usb tree gained a build failure so I used the version from
>>>> next-20130417.
>>>>
>>>> I added two merge fix patches after the gen-gpio tree.
>>>>
>>>> The ppc-temp tree gained a conflict against the metag tree.
>>>>
>>>> The akpm tree lost a patch that turned up elsewhere.
>>>>
>>>> ----------------------------------------------------------------------------
>>>>
>>>
>>> Not sure what the root-cause for this call-trace is (see screenshot).
>>>
>>> This is reproducible when running my kernel build-script (4 parallel-make-jobs).
>>>
>>> Any hints welcome!
>>
>> The panic handlers in our modeset code are pretty decent fubar - they
>> take mutexes all over the place. So I think the backtrace you see
>> there is actually a secondary effect. I've looked into fixing this up,
>> but the issue is that drivers themselves have tons of state protected
>> with mutexes, which all potentially affects the panic handler. So I've
>> given up on that for now ...
>
> Thanks for taking care.
>
> On suspicion [1] I have reverted [2]... NOPE.
>
> - Sedat -
>
> [1] http://marc.info/?l=linux-kernel&m=136631921208895&w=2
> [2] http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/?id=5a90d1a95356de7a32acb2e5309ac579a891af8f
>

Hmmm, the issue seems to be gone with today's Linux-Next (next-20130419).
My kernel-build is still running with no call-trace...

- Sedat -

>> -Daniel
>> --
>> Daniel Vetter
>> Software Engineer, Intel Corporation
>> +41 (0) 79 365 57 48 - http://blog.ffwll.ch

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
       [not found]       ` <CA+icZUXjTGSG+tejOAFgXr8EpKd7dL=-W41ha_-0N=roAxN3eg@mail.gmail.com>
@ 2013-04-19 16:43         ` Sedat Dilek
  2013-04-19 18:53           ` Sedat Dilek
  0 siblings, 1 reply; 21+ messages in thread
From: Sedat Dilek @ 2013-04-19 16:43 UTC (permalink / raw)
  To: Daniel Vetter
  Cc: Stephen Rothwell, linux-next, Linux Kernel Mailing List, x86,
	Ingo Molnar, Thomas Gleixner, Paul McKenney, Paul McKenney, DRI,
	Dave Airlie

On Fri, Apr 19, 2013 at 12:27 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> On Fri, Apr 19, 2013 at 12:19 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>> On Thu, Apr 18, 2013 at 11:59 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>>> On Thu, Apr 18, 2013 at 9:48 PM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote:
>>>> On Thu, Apr 18, 2013 at 3:05 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>>>>> On Thu, Apr 18, 2013 at 10:28 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>>>>>> Hi all,
>>>>>>
>>>>>> Changes since 20130417:
>>>>>>
>>>>>> New Trees:      rpmsg (actually added yesterday)
>>>>>>                 ppc-temp (replacing powerpc for this week)
>>>>>>
>>>>>> The ceph tree gained a conflict against Linus' tree.
>>>>>>
>>>>>> The net-next tree gained a conflict against the infiniband tree.
>>>>>>
>>>>>> The usb tree gained a build failure so I used the version from
>>>>>> next-20130417.
>>>>>>
>>>>>> I added two merge fix patches after the gen-gpio tree.
>>>>>>
>>>>>> The ppc-temp tree gained a conflict against the metag tree.
>>>>>>
>>>>>> The akpm tree lost a patch that turned up elsewhere.
>>>>>>
>>>>>> ----------------------------------------------------------------------------
>>>>>>
>>>>>
>>>>> Not sure what the root-cause for this call-trace is (see screenshot).
>>>>>
>>>>> This is reproducible when running my kernel build-script (4 parallel-make-jobs).
>>>>>
>>>>> Any hints welcome!
>>>>
>>>> The panic handlers in our modeset code are pretty decent fubar - they
>>>> take mutexes all over the place. So I think the backtrace you see
>>>> there is actually a secondary effect. I've looked into fixing this up,
>>>> but the issue is that drivers themselves have tons of state protected
>>>> with mutexes, which all potentially affects the panic handler. So I've
>>>> given up on that for now ...
>>>
>>> Thanks for taking care.
>>>
>>> On suspicion [1] I have reverted [2]... NOPE.
>>>
>>> - Sedat -
>>>
>>> [1] http://marc.info/?l=linux-kernel&m=136631921208895&w=2
>>> [2] http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/?id=5a90d1a95356de7a32acb2e5309ac579a891af8f
>>>
>>
>> Hmmm, the issue seems to be gone with today's Linux-Next (next-20130419).
>> My kernel-build is still running with no call-trace...
>>
>
> NO, It's no good.
>

I tried to switch from SLUB to SLAB...

...and also from VIRT_CPU_ACCOUNTING_GEN to TICK_CPU_ACCOUNTING.

2x NOPE.

In one kernel-build I saw in my console...

     semop(1): encountered an error: Identifier removed

...if this says sth. to you.

- Sedat -

- Sedat -

> - Sedat -
>
> [1] http://www.youtube.com/watch?v=LwicaralvS0
>
>> - Sedat -
>>
>>>> -Daniel
>>>> --
>>>> Daniel Vetter
>>>> Software Engineer, Intel Corporation
>>>> +41 (0) 79 365 57 48 - http://blog.ffwll.ch

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
  2013-04-19 16:43         ` Sedat Dilek
@ 2013-04-19 18:53           ` Sedat Dilek
  2013-04-19 19:19             ` Rik van Riel
  0 siblings, 1 reply; 21+ messages in thread
From: Sedat Dilek @ 2013-04-19 18:53 UTC (permalink / raw)
  To: Daniel Vetter
  Cc: Stephen Rothwell, linux-next, Linux Kernel Mailing List, x86,
	Ingo Molnar, Thomas Gleixner, Paul McKenney, Paul McKenney, DRI,
	Dave Airlie, Davidlohr Bueso, Linus Torvalds, Emmanuel Benisty,
	Rik van Riel

On Fri, Apr 19, 2013 at 6:43 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> On Fri, Apr 19, 2013 at 12:27 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>> On Fri, Apr 19, 2013 at 12:19 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>>> On Thu, Apr 18, 2013 at 11:59 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>>>> On Thu, Apr 18, 2013 at 9:48 PM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote:
>>>>> On Thu, Apr 18, 2013 at 3:05 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>>>>>> On Thu, Apr 18, 2013 at 10:28 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>>>>>>> Hi all,
>>>>>>>
>>>>>>> Changes since 20130417:
>>>>>>>
>>>>>>> New Trees:      rpmsg (actually added yesterday)
>>>>>>>                 ppc-temp (replacing powerpc for this week)
>>>>>>>
>>>>>>> The ceph tree gained a conflict against Linus' tree.
>>>>>>>
>>>>>>> The net-next tree gained a conflict against the infiniband tree.
>>>>>>>
>>>>>>> The usb tree gained a build failure so I used the version from
>>>>>>> next-20130417.
>>>>>>>
>>>>>>> I added two merge fix patches after the gen-gpio tree.
>>>>>>>
>>>>>>> The ppc-temp tree gained a conflict against the metag tree.
>>>>>>>
>>>>>>> The akpm tree lost a patch that turned up elsewhere.
>>>>>>>
>>>>>>> ----------------------------------------------------------------------------
>>>>>>>
>>>>>>
>>>>>> Not sure what the root-cause for this call-trace is (see screenshot).
>>>>>>
>>>>>> This is reproducible when running my kernel build-script (4 parallel-make-jobs).
>>>>>>
>>>>>> Any hints welcome!
>>>>>
>>>>> The panic handlers in our modeset code are pretty decent fubar - they
>>>>> take mutexes all over the place. So I think the backtrace you see
>>>>> there is actually a secondary effect. I've looked into fixing this up,
>>>>> but the issue is that drivers themselves have tons of state protected
>>>>> with mutexes, which all potentially affects the panic handler. So I've
>>>>> given up on that for now ...
>>>>
>>>> Thanks for taking care.
>>>>
>>>> On suspicion [1] I have reverted [2]... NOPE.
>>>>
>>>> - Sedat -
>>>>
>>>> [1] http://marc.info/?l=linux-kernel&m=136631921208895&w=2
>>>> [2] http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/?id=5a90d1a95356de7a32acb2e5309ac579a891af8f
>>>>
>>>
>>> Hmmm, the issue seems to be gone with today's Linux-Next (next-20130419).
>>> My kernel-build is still running with no call-trace...
>>>
>>
>> NO, It's no good.
>>
>
> I tried to switch from SLUB to SLAB...
>
> ...and also from VIRT_CPU_ACCOUNTING_GEN to TICK_CPU_ACCOUNTING.
>
> 2x NOPE.
>
> In one kernel-build I saw in my console...
>
>      semop(1): encountered an error: Identifier removed
>
> ...if this says sth. to you.
>

[ CC folks from below thread ]

I have found a thread called "Re: ipc,sem: sysv semaphore scalability"
on LKML with a screenshot that shows the same call-trace.
I followed it a bit.
There is a patch in [3]... unconfirmed.

Comments on the rcu read-lock and "sem_lock()" vs "sem_unlock()" from Linus.

What's the status of this discussion?

- Sedat -

[1] https://lkml.org/lkml/2013/3/30/6
[2] http://i.imgur.com/uk6gmq1.jpg
[3] https://lkml.org/lkml/2013/3/31/12
[4] https://lkml.org/lkml/2013/3/31/77

> - Sedat -
>
> - Sedat -
>
>> - Sedat -
>>
>> [1] http://www.youtube.com/watch?v=LwicaralvS0
>>
>>> - Sedat -
>>>
>>>>> -Daniel
>>>>> --
>>>>> Daniel Vetter
>>>>> Software Engineer, Intel Corporation
>>>>> +41 (0) 79 365 57 48 - http://blog.ffwll.ch

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
  2013-04-19 18:53           ` Sedat Dilek
@ 2013-04-19 19:19             ` Rik van Riel
  2013-04-19 20:12               ` Davidlohr Bueso
  0 siblings, 1 reply; 21+ messages in thread
From: Rik van Riel @ 2013-04-19 19:19 UTC (permalink / raw)
  To: sedat.dilek
  Cc: Daniel Vetter, Stephen Rothwell, linux-next,
	Linux Kernel Mailing List, x86, Ingo Molnar, Thomas Gleixner,
	Paul McKenney, Paul McKenney, DRI, Dave Airlie, Davidlohr Bueso,
	Linus Torvalds, Emmanuel Benisty

On 04/19/2013 02:53 PM, Sedat Dilek wrote:
> On Fri, Apr 19, 2013 at 6:43 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>
>> I tried to switch from SLUB to SLAB...
>>
>> ...and also from VIRT_CPU_ACCOUNTING_GEN to TICK_CPU_ACCOUNTING.
>>
>> 2x NOPE.
>>
>> In one kernel-build I saw in my console...
>>
>>       semop(1): encountered an error: Identifier removed
>>
>> ...if this says sth. to you.
>>
> [ CC folks from below thread ]
>
> I have found a thread called "Re: ipc,sem: sysv semaphore scalability"
> on LKML with a screenshot that shows the same call-trace.
> I followed it a bit.
> There is a patch in [3]... unconfirmed.
>
> Comments on the rcu read-lock and "sem_lock()" vs "sem_unlock()" from Linus.
>
> What's the status of this discussion?
>
> - Sedat -
>
> [1] https://lkml.org/lkml/2013/3/30/6
> [2] http://i.imgur.com/uk6gmq1.jpg
> [3] https://lkml.org/lkml/2013/3/31/12
> [4] https://lkml.org/lkml/2013/3/31/77
>
I am at a conference right now, but when I get
back I will check linux-next vs. all the fixes from
the semaphore scalability email thread.

I will gather up the not-yet-in-linux-next fixes,
and will send them to Andrew for inclusion.

No guarantee that those fixes are related to
your problem, of course :)

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
  2013-04-19 19:19             ` Rik van Riel
@ 2013-04-19 20:12               ` Davidlohr Bueso
       [not found]                 ` <CA+icZUVjx7pDJWo3tGxX3ANXtiTP0_Q1YyOowANhn1wzcSgWaA@mail.gmail.com>
  0 siblings, 1 reply; 21+ messages in thread
From: Davidlohr Bueso @ 2013-04-19 20:12 UTC (permalink / raw)
  To: Rik van Riel
  Cc: sedat.dilek, Daniel Vetter, Stephen Rothwell, linux-next,
	Linux Kernel Mailing List, x86, Ingo Molnar, Thomas Gleixner,
	Paul McKenney, Paul McKenney, DRI, Dave Airlie, Linus Torvalds,
	Emmanuel Benisty

On Fri, 2013-04-19 at 15:19 -0400, Rik van Riel wrote:
> On 04/19/2013 02:53 PM, Sedat Dilek wrote:
> > On Fri, Apr 19, 2013 at 6:43 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> >
> >> I tried to switch from SLUB to SLAB...
> >>
> >> ...and also from VIRT_CPU_ACCOUNTING_GEN to TICK_CPU_ACCOUNTING.
> >>
> >> 2x NOPE.
> >>
> >> In one kernel-build I saw in my console...
> >>
> >>       semop(1): encountered an error: Identifier removed

This looks like what Emmanuel was/is running into:
https://lkml.org/lkml/2013/3/30/1

> >>
> >> ...if this says sth. to you.
> >>
> > [ CC folks from below thread ]
> >
> > I have found a thread called "Re: ipc,sem: sysv semaphore scalability"
> > on LKML with a screenshot that shows the same call-trace.
> > I followed it a bit.
> > There is a patch in [3]... unconfirmed.
> >
> > Comments on the rcu read-lock and "sem_lock()" vs "sem_unlock()" from Linus.
> >
> > What's the status of this discussion?
> >
> > - Sedat -
> >
> > [1] https://lkml.org/lkml/2013/3/30/6
> > [2] http://i.imgur.com/uk6gmq1.jpg
> > [3] https://lkml.org/lkml/2013/3/31/12
> > [4] https://lkml.org/lkml/2013/3/31/77
> >
> I am at a conference right now, but when I get
> back I will check linux-next vs. all the fixes from
> the semaphore scalability email thread.

I'm back from the collab. summit, so AFAICT these still need to go in
linux-next:

ipc,sem: untangle RCU locking with find_alloc_undo:
https://lkml.org/lkml/2013/3/28/275

ipc,sem: fix lockdep false positive:
https://lkml.org/lkml/2013/3/29/119

ipc, sem: do not call sem_lock when bogus sma:
https://lkml.org/lkml/2013/3/31/12

Thanks,
Davidlohr

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
       [not found]                 ` <CA+icZUVjx7pDJWo3tGxX3ANXtiTP0_Q1YyOowANhn1wzcSgWaA@mail.gmail.com>
@ 2013-04-19 21:24                   ` Linus Torvalds
  2013-04-19 21:39                     ` Paul E. McKenney
  2013-04-19 22:12                     ` Sedat Dilek
  0 siblings, 2 replies; 21+ messages in thread
From: Linus Torvalds @ 2013-04-19 21:24 UTC (permalink / raw)
  To: Sedat Dilek
  Cc: Davidlohr Bueso, Rik van Riel, Daniel Vetter, Stephen Rothwell,
	linux-next, Linux Kernel Mailing List, the arch/x86 maintainers,
	Ingo Molnar, Thomas Gleixner, Paul McKenney, Paul McKenney, DRI,
	Dave Airlie, Emmanuel Benisty

[-- Attachment #1: Type: text/plain, Size: 364 bytes --]

On Fri, Apr 19, 2013 at 2:09 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>
> I have applied all three patches and see still call-traces.
> New are apparmor related messages.

Can you try the crazy rcu double-free debug hack?

See

    https://lkml.org/lkml/2013/3/30/113

and I'm re-attaching the ugly-ass crazy hack patch here too..

                    Linus

[-- Attachment #2: rcu-double-free-hack.patch --]
[-- Type: application/octet-stream, Size: 2253 bytes --]

 include/linux/types.h | 1 +
 include/net/dst.h     | 2 +-
 kernel/rcu.h          | 1 +
 kernel/rcutree.c      | 6 ++++++
 4 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/include/linux/types.h b/include/linux/types.h
index 4d118ba11349..3f0d9daff906 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -209,6 +209,7 @@ struct ustat {
 struct callback_head {
 	struct callback_head *next;
 	void (*func)(struct callback_head *head);
+	unsigned long magic;
 };
 #define rcu_head callback_head
 
diff --git a/include/net/dst.h b/include/net/dst.h
index 1f8fd109e225..6f8acd031948 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -89,7 +89,7 @@ struct dst_entry {
 	 * (L1_CACHE_SIZE would be too much)
 	 */
 #ifdef CONFIG_64BIT
-	long			__pad_to_align_refcnt[2];
+	long			__pad_to_align_refcnt[1];
 #endif
 	/*
 	 * __refcnt wants to be on a different cache line from
diff --git a/kernel/rcu.h b/kernel/rcu.h
index 7f8e7590e3e5..0381ed3721bb 100644
--- a/kernel/rcu.h
+++ b/kernel/rcu.h
@@ -98,6 +98,7 @@ static inline bool __rcu_reclaim(char *rn, struct rcu_head *head)
 {
 	unsigned long offset = (unsigned long)head->func;
 
+	head->magic = 0;
 	if (__is_kfree_rcu_offset(offset)) {
 		RCU_TRACE(trace_rcu_invoke_kfree_callback(rn, head, offset));
 		kfree((void *)head - offset);
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 5b8ad827fd86..80f9cfb63748 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -2221,6 +2221,9 @@ static void __call_rcu_core(struct rcu_state *rsp, struct rcu_data *rdp,
 	}
 }
 
+/* Unlikely bit-pattern to check double RCU calls! */
+#define RCU_HEAD_MAGIC ((unsigned long)(0xfeeddead1acef8edll))
+
 /*
  * Helper function for call_rcu() and friends.  The cpu argument will
  * normally be -1, indicating "currently running CPU".  It may specify
@@ -2235,9 +2238,12 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
 	struct rcu_data *rdp;
 
 	WARN_ON_ONCE((unsigned long)head & 0x3); /* Misaligned rcu_head! */
+	if (WARN_ON_ONCE(head->magic == RCU_HEAD_MAGIC))
+		return;
 	debug_rcu_head_queue(head);
 	head->func = func;
 	head->next = NULL;
+	head->magic = RCU_HEAD_MAGIC;
 
 	/*
 	 * Opportunistically note grace-period endings and beginnings.

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
  2013-04-19 21:24                   ` Linus Torvalds
@ 2013-04-19 21:39                     ` Paul E. McKenney
  2013-04-19 22:12                     ` Sedat Dilek
  1 sibling, 0 replies; 21+ messages in thread
From: Paul E. McKenney @ 2013-04-19 21:39 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Sedat Dilek, Davidlohr Bueso, Rik van Riel, Daniel Vetter,
	Stephen Rothwell, linux-next, Linux Kernel Mailing List,
	the arch/x86 maintainers, Ingo Molnar, Thomas Gleixner,
	Paul McKenney, DRI, Dave Airlie, Emmanuel Benisty

On Fri, Apr 19, 2013 at 02:24:10PM -0700, Linus Torvalds wrote:
> On Fri, Apr 19, 2013 at 2:09 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> >
> > I have applied all three patches and see still call-traces.
> > New are apparmor related messages.
> 
> Can you try the crazy rcu double-free debug hack?
> 
> See
> 
>     https://lkml.org/lkml/2013/3/30/113
> 
> and I'm re-attaching the ugly-ass crazy hack patch here too..
> 
>                     Linus

For whatever it is worth, CONFIG_DEBUG_OBJECTS_RCU_HEAD=y is intended to
detect RCU double-freeing.  But if it isn't helping for whatever reason,
please let me know!

							Thanx, Paul

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
  2013-04-19 21:24                   ` Linus Torvalds
  2013-04-19 21:39                     ` Paul E. McKenney
@ 2013-04-19 22:12                     ` Sedat Dilek
  2013-04-19 22:34                       ` Sedat Dilek
  1 sibling, 1 reply; 21+ messages in thread
From: Sedat Dilek @ 2013-04-19 22:12 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Davidlohr Bueso, Rik van Riel, Daniel Vetter, Stephen Rothwell,
	linux-next, Linux Kernel Mailing List, the arch/x86 maintainers,
	Ingo Molnar, Thomas Gleixner, Paul McKenney, Paul McKenney, DRI,
	Dave Airlie, Emmanuel Benisty

[-- Attachment #1: Type: text/plain, Size: 714 bytes --]

On Fri, Apr 19, 2013 at 11:24 PM, Linus Torvalds
<torvalds@linux-foundation.org> wrote:
> On Fri, Apr 19, 2013 at 2:09 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>>
>> I have applied all three patches and see still call-traces.
>> New are apparmor related messages.
>
> Can you try the crazy rcu double-free debug hack?
>
> See
>
>     https://lkml.org/lkml/2013/3/30/113
>
> and I'm re-attaching the ugly-ass crazy hack patch here too..
>
>                     Linus

Attached the dmesg with some call-traces inside.

I am building a -9 kernel with Paul's kconfig recommendations...

CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1

...and will report.

- Sedat -

[-- Attachment #2: dmesg_3.9.0-rc7-next20130419-8-iniza-small_RCU-DOUBLE-FREE-HACK.txt --]
[-- Type: text/plain, Size: 66841 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.9.0-rc7-next20130419-8-iniza-small (sedat.dilek@gmail.com@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Fri Apr 19 23:49:39 CEST 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc7-next20130419-8-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask FE0000000 write-back
[    0.000000]   6 base 11FE00000 mask FFFE00000 uncachable
[    0.000000]   7 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fa4000, 0x01fa4fff] PGTABLE
[    0.000000] BRK [0x01fa5000, 0x01fa5fff] PGTABLE
[    0.000000] BRK [0x01fa6000, 0x01fa6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff]
[    0.000000]  [mem 0x11fc00000-0x11fdfffff] page 2M
[    0.000000] BRK [0x01fa7000, 0x01fa7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff]
[    0.000000]  [mem 0x11c000000-0x11fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff]
[    0.000000]  [mem 0x40200000-0xd9bfffff] page 2M
[    0.000000]  [mem 0xd9c00000-0xd9c9efff] page 4k
[    0.000000] BRK [0x01fa8000, 0x01fa8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[    0.000000]  [mem 0xdafff000-0xdaffffff] page 4k
[    0.000000] RAMDISK: [mem 0x379ae000-0x37ccefff]
[    0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[    0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD  SNB-CPT 00000000 INTL 20061109)
[    0.000000] ACPI: FACS 00000000daf47000 00040
[    0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[    0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000dafea000 00996 (v01  PmRef    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL      COMBUF 00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01   Iffs  IffsAsl 00003000 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff]
[    0.000000]   NODE_DATA [mem 0x11fdf8000-0x11fdfbfff]
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x11fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xd9c9efff]
[    0.000000]   node   0: [mem 0xdafff000-0xdaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x11fdfffff]
[    0.000000] On node 0 totalpages: 1021500
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12127 pages used for memmap
[    0.000000]   DMA32 zone: 886944 pages, LIFO batch:31
[    0.000000]   Normal zone: 1785 pages used for memmap
[    0.000000]   Normal zone: 130560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000
[    0.000000] PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000
[    0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
[    0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
[    0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[    0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[    0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[    0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fa00000 s85376 r8192 d21120 u262144
[    0.000000] pcpu-alloc: s85376 r8192 d21120 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1007376
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc7-next20130419-8-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3939512k/4716544k available (6961k kernel code, 630544k absent, 146488k reserved, 6304k data, 1340k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1596.321 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.64 BogoMIPS (lpj=6385284)
[    0.000010] pid_max: default: 32768 minimum: 301
[    0.000140] Security Framework initialized
[    0.000152] AppArmor: AppArmor initialized
[    0.000155] Yama: becoming mindful.
[    0.000540] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001611] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002077] Mount-cache hash table entries: 256
[    0.002589] Initializing cgroup subsys memory
[    0.002656] Initializing cgroup subsys devices
[    0.002660] Initializing cgroup subsys freezer
[    0.002664] Initializing cgroup subsys blkio
[    0.002667] Initializing cgroup subsys perf_event
[    0.002671] Initializing cgroup subsys hugetlb
[    0.002754] Disabled fast string operations
[    0.002757] CPU: Physical Processor ID: 0
[    0.002760] CPU: Processor Core ID: 0
[    0.002766] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.002766] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002773] mce: CPU supports 7 MCE banks
[    0.002789] CPU0: Thermal monitoring enabled (TM1)
[    0.002800] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.002800] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.002800] tlb_flushall_shift: 5
[    0.002891] Freeing SMP alternatives: 24k freed
[    0.005119] ACPI: Core revision 20130328
[    0.015596] ACPI: All ACPI Tables successfully acquired
[    0.017240] ftrace: allocating 26390 entries in 104 pages
[    0.032202] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.071862] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
[    0.071874] TSC deadline timer enabled
[    0.071886] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[    0.071898] ... version:                3
[    0.071900] ... bit width:              48
[    0.071902] ... generic registers:      4
[    0.071905] ... value mask:             0000ffffffffffff
[    0.071907] ... max period:             000000007fffffff
[    0.071910] ... fixed-purpose events:   3
[    0.071912] ... event mask:             000000070000000f
[    0.084880] Disabled fast string operations
[    0.088048] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.099573] Disabled fast string operations
[    0.113204] Disabled fast string operations
[    0.073848] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.115328] Brought up 4 CPUs
[    0.115337] smpboot: Total of 4 processors activated (12770.56 BogoMIPS)
[    0.119319] devtmpfs: initialized
[    0.121199] EVM: security.selinux
[    0.121202] EVM: security.SMACK64
[    0.121204] EVM: security.capability
[    0.121284] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
[    0.122739] regulator-dummy: no parameters
[    0.122883] NET: Registered protocol family 16
[    0.123193] ACPI: bus type PCI registered
[    0.123300] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.123310] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.129963] PCI: Using configuration type 1 for base access
[    0.133019] bio: create slab <bio-0> at 0
[    0.133392] ACPI: Added _OSI(Module Device)
[    0.133397] ACPI: Added _OSI(Processor Device)
[    0.133400] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.133403] ACPI: Added _OSI(Processor Aggregator Device)
[    0.135028] ACPI: EC: Look up EC in DSDT
[    0.159406] ACPI: Executed 1 blocks of module-level executable AML code
[    0.165224] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.176816] ACPI: SSDT 00000000dae70718 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.177280] ACPI: Dynamic OEM Table Load:
[    0.177284] ACPI: SSDT           (null) 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.187832] ACPI: SSDT 00000000dae71a98 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.188374] ACPI: Dynamic OEM Table Load:
[    0.188378] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.199513] ACPI: SSDT 00000000dae6fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.199948] ACPI: Dynamic OEM Table Load:
[    0.199951] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.213781] ACPI: Interpreter enabled
[    0.213798] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[    0.213821] ACPI: (supports S0 S1 S3 S4 S5)
[    0.213825] ACPI: Using IOAPIC for interrupt routing
[    0.213878] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.237245] ACPI: Power Resource [FN00] (off)
[    0.237424] ACPI: Power Resource [FN01] (off)
[    0.237597] ACPI: Power Resource [FN02] (off)
[    0.237768] ACPI: Power Resource [FN03] (off)
[    0.237945] ACPI: Power Resource [FN04] (off)
[    0.238977] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.239316] \_SB_.PCI0:_OSC invalid UUID
[    0.239318] _OSC request data:1 8 0 
[    0.240294] PCI host bridge to bus 0000:00
[    0.240302] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.240306] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.240309] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.240313] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.240317] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[    0.240321] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.240338] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.240488] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.240501] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.240508] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.240513] pci 0000:00:02.0: reg 20: [io  0x3000-0x303f]
[    0.240681] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.240707] pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit]
[    0.240791] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.240943] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.240967] pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff]
[    0.241065] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.241163] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.241181] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit]
[    0.241257] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.241299] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.241363] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.241452] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.241498] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.241565] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.241653] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.241709] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.241777] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.241908] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.242033] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.242057] pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff]
[    0.242155] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.242248] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.242434] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.242456] pci 0000:00:1f.2: reg 10: [io  0x3088-0x308f]
[    0.242465] pci 0000:00:1f.2: reg 14: [io  0x3094-0x3097]
[    0.242474] pci 0000:00:1f.2: reg 18: [io  0x3080-0x3087]
[    0.242483] pci 0000:00:1f.2: reg 1c: [io  0x3090-0x3093]
[    0.242492] pci 0000:00:1f.2: reg 20: [io  0x3060-0x307f]
[    0.242501] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff]
[    0.242552] pci 0000:00:1f.2: PME# supported from D3hot
[    0.242662] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.242680] pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit]
[    0.242703] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
[    0.243110] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
[    0.243258] pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit]
[    0.243994] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.244146] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.251503] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.251512] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.251677] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.251747] pci 0000:02:00.0: reg 10: [io  0x2000-0x20ff]
[    0.251869] pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref]
[    0.251944] pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]
[    0.252275] pci 0000:02:00.0: supports D1 D2
[    0.252277] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.252403] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.259415] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.259430] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.259455] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.259650] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.259688] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit]
[    0.259884] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.267414] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.267433] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.267630] \_SB_.PCI0:_OSC invalid UUID
[    0.267631] _OSC request data:1 1f 0 
[    0.267636] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.267641] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.268493] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.268609] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.268725] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.268837] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.268949] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.269061] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.269174] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.269286] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.269865] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.269876] acpi root: \_SB_.PCI0 notify handler is installed
[    0.269935] Found 1 acpi root devices
[    0.269996] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.270196] ACPI: No dock devices found.
[    0.270383] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.270389] vgaarb: loaded
[    0.270391] vgaarb: bridge control possible 0000:00:02.0
[    0.271029] SCSI subsystem initialized
[    0.271033] ACPI: bus type ATA registered
[    0.271142] libata version 3.00 loaded.
[    0.271199] ACPI: bus type USB registered
[    0.271244] usbcore: registered new interface driver usbfs
[    0.271269] usbcore: registered new interface driver hub
[    0.271319] usbcore: registered new device driver usb
[    0.271612] PCI: Using ACPI for IRQ routing
[    0.273277] PCI: pci_cache_line_size set to 64 bytes
[    0.273382] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.273384] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
[    0.273386] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.273388] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[    0.273637] NetLabel: Initializing
[    0.273640] NetLabel:  domain hash size = 128
[    0.273642] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.273689] NetLabel:  unlabeled traffic allowed by default
[    0.273771] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.273780] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.275794] Switching to clocksource hpet
[    0.290017] AppArmor: AppArmor Filesystem Enabled
[    0.290074] pnp: PnP ACPI init
[    0.290092] ACPI: bus type PNP registered
[    0.290515] pnp 00:00: [dma 4]
[    0.290556] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.290595] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.290759] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.290810] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.290882] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.290888] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.290892] system 00:04: [io  0x5000-0x5003] has been reserved
[    0.290898] system 00:04: [io  0xffff] has been reserved
[    0.290902] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.290906] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.290909] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.290913] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.290917] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.290921] system 00:04: [io  0x5000-0x500f] could not be reserved
[    0.290926] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.290968] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.291057] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.291062] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.291117] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.291199] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[    0.291507] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.291512] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.291516] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.291520] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.291524] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.291528] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.291532] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.291537] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.291541] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.291546] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.291550] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.292220] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.292258] pnp: PnP ACPI: found 11 devices
[    0.292261] ACPI: bus type PNP unregistered
[    0.299509] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.299518] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.299531] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.299536] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.299547] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.299557] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.299564] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.299997] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.300000] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.300002] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.300004] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[    0.300006] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.300008] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[    0.300010] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.300012] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.300014] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.300125] NET: Registered protocol family 2
[    0.300466] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.300616] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.300713] TCP: Hash tables configured (established 32768 bind 32768)
[    0.300974] TCP: reno registered
[    0.300984] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.301007] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.301194] NET: Registered protocol family 1
[    0.301214] pci 0000:00:02.0: Boot video device
[    0.301952] PCI: CLS 64 bytes, default 64
[    0.302149] Trying to unpack rootfs image as initramfs...
[    0.373042] Freeing initrd memory: 3204k freed
[    0.373727] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.373736] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff]
[    0.374040] Scanning for low memory corruption every 60 seconds
[    0.374390] Initialise module verification
[    0.374455] audit: initializing netlink socket (disabled)
[    0.374476] type=2000 audit(1366415871.372:1): initialized
[    0.404631] bounce pool size: 64 pages
[    0.404657] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.405252] VFS: Disk quotas dquot_6.5.2
[    0.405295] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.406016] fuse init (API version 7.21)
[    0.406108] msgmni has been set to 7700
[    0.406633] Key type asymmetric registered
[    0.406637] Asymmetric key parser 'x509' registered
[    0.406679] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.406729] io scheduler noop registered
[    0.406732] io scheduler deadline registered (default)
[    0.406762] io scheduler cfq registered
[    0.407130] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.407172] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.407258] intel_idle: MWAIT substates: 0x21120
[    0.407260] intel_idle: v0.4 model 0x2A
[    0.407261] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.407707] ACPI: AC Adapter [ADP1] (on-line)
[    0.408041] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.408126] ACPI: Lid Switch [LID0]
[    0.408187] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.408194] ACPI: Power Button [PWRB]
[    0.408253] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.408259] ACPI: Power Button [PWRF]
[    0.408350] ACPI: Fan [FAN0] (off)
[    0.408398] ACPI: Fan [FAN1] (off)
[    0.408448] ACPI: Fan [FAN2] (off)
[    0.408498] ACPI: Fan [FAN3] (off)
[    0.408547] ACPI: Fan [FAN4] (off)
[    0.408638] ACPI: Requesting acpi_cpufreq
[    0.415684] thermal LNXTHERM:00: registered as thermal_zone0
[    0.415689] ACPI: Thermal Zone [TZ00] (65 C)
[    0.416108] thermal LNXTHERM:01: registered as thermal_zone1
[    0.416112] ACPI: Thermal Zone [TZ01] (30 C)
[    0.416158] GHES: HEST is not enabled!
[    0.416358] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.421693] ACPI: Battery Slot [BAT1] (battery present)
[    0.421714] Linux agpgart interface v0.103
[    0.423890] brd: module loaded
[    0.424979] loop: module loaded
[    0.425193] mei_me 0000:00:16.0: setting latency timer to 64
[    0.425259] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[    0.429032] ahci 0000:00:1f.2: version 3.0
[    0.429213] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    0.429420] ahci: SSS flag set, parallel bus scan disabled
[    0.443718] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[    0.443724] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    0.443732] ahci 0000:00:1f.2: setting latency timer to 64
[    0.468423] scsi0 : ahci
[    0.468564] scsi1 : ahci
[    0.468669] scsi2 : ahci
[    0.468772] scsi3 : ahci
[    0.468874] scsi4 : ahci
[    0.469010] scsi5 : ahci
[    0.469079] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41
[    0.469085] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41
[    0.469089] ata3: DUMMY
[    0.469092] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41
[    0.469097] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41
[    0.469101] ata6: DUMMY
[    0.469949] libphy: Fixed MDIO Bus: probed
[    0.470202] tun: Universal TUN/TAP device driver, 1.6
[    0.470204] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.470274] PPP generic driver version 2.4.2
[    0.470375] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.470378] ehci-pci: EHCI PCI platform driver
[    0.470548] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.470557] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.470568] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.470591] ehci-pci 0000:00:1a.0: debug port 2
[    0.474513] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.474560] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000
[    0.483672] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.483714] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.483718] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.483722] usb usb1: Product: EHCI Host Controller
[    0.483726] usb usb1: Manufacturer: Linux 3.9.0-rc7-next20130419-8-iniza-small ehci_hcd
[    0.483730] usb usb1: SerialNumber: 0000:00:1a.0
[    0.483873] hub 1-0:1.0: USB hub found
[    0.483885] hub 1-0:1.0: 2 ports detected
[    0.484142] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.484148] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.484156] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.484177] ehci-pci 0000:00:1d.0: debug port 2
[    0.488082] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.488127] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000
[    0.499663] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.499700] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.499704] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.499708] usb usb2: Product: EHCI Host Controller
[    0.499711] usb usb2: Manufacturer: Linux 3.9.0-rc7-next20130419-8-iniza-small ehci_hcd
[    0.499715] usb usb2: SerialNumber: 0000:00:1d.0
[    0.499844] hub 2-0:1.0: USB hub found
[    0.499852] hub 2-0:1.0: 2 ports detected
[    0.499970] ehci-platform: EHCI generic platform driver
[    0.499988] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.500023] uhci_hcd: USB Universal Host Controller Interface driver
[    0.500149] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.500157] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    0.509930] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.509937] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[    0.509943] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[    0.509950] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[    0.509956] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[    0.510237] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.510241] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.510245] usb usb3: Product: xHCI Host Controller
[    0.510248] usb usb3: Manufacturer: Linux 3.9.0-rc7-next20130419-8-iniza-small xhci_hcd
[    0.510252] usb usb3: SerialNumber: 0000:03:00.0
[    0.510346] xHCI xhci_add_endpoint called for root hub
[    0.510348] xHCI xhci_check_bandwidth called for root hub
[    0.510380] hub 3-0:1.0: USB hub found
[    0.510391] hub 3-0:1.0: 2 ports detected
[    0.510488] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.510495] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    0.510550] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.510554] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.510558] usb usb4: Product: xHCI Host Controller
[    0.510561] usb usb4: Manufacturer: Linux 3.9.0-rc7-next20130419-8-iniza-small xhci_hcd
[    0.510565] usb usb4: SerialNumber: 0000:03:00.0
[    0.510652] xHCI xhci_add_endpoint called for root hub
[    0.510654] xHCI xhci_check_bandwidth called for root hub
[    0.510686] hub 4-0:1.0: USB hub found
[    0.510699] hub 4-0:1.0: 2 ports detected
[    0.527708] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[    0.534695] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.534703] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.534901] mousedev: PS/2 mouse device common for all mice
[    0.535416] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.535454] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.535508] device-mapper: uevent: version 1.0.3
[    0.535576] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    0.535757] cpuidle: using governor ladder
[    0.535765] ledtrig-cpu: registered to indicate activity on CPUs
[    0.535768] EFI Variables Facility v0.08 2004-May-17
[    0.535996] ashmem: initialized
[    0.536137] TCP: cubic registered
[    0.536225] NET: Registered protocol family 10
[    0.536623] NET: Registered protocol family 17
[    0.536640] Key type dns_resolver registered
[    0.536999] PM: Hibernation image not present or could not be loaded.
[    0.537000] Loading module verification certificates
[    0.538091] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: f86e5891c8b07557cdc7b3e5ce931ed113076e3a'
[    0.538120] registered taskstats version 1
[    0.541231] Key type trusted registered
[    0.543913] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.544407] Key type encrypted registered
[    0.584495] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.584503] EDD information not available.
[    0.787560] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.788753] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[    0.788773] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.789804] ata1.00: configured for UDMA/133
[    0.790097] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[    0.790329] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.790336] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.790416] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.790451] sd 0:0:0:0: [sda] Write Protect is off
[    0.790457] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.790499] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.795526] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.808887]  sda: sda1 sda2 sda3
[    0.809900] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.928117] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    0.928138] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.928495] hub 1-1:1.0: USB hub found
[    0.928558] hub 1-1:1.0: 6 ports detected
[    1.039393] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.111327] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.111895] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133
[    1.111912] ata2.00: 31277232 sectors, multi 1: LBA48 
[    1.112613] ata2.00: configured for UDMA/133
[    1.112890] scsi 1:0:0:0: Direct-Access     ATA      SanDisk iSSD P4  SSD  PQ: 0 ANSI: 5
[    1.113123] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    1.113135] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.113296] sd 1:0:0:0: [sdb] Write Protect is off
[    1.113310] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.113438] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.114497]  sdb: sdb1 sdb2
[    1.114924] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.171940] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.171960] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.172327] hub 2-1:1.0: USB hub found
[    1.172504] hub 2-1:1.0: 6 ports detected
[    1.247384] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.345434] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e
[    1.345453] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.345465] usb 1-1.2: Product: USB-PS/2 Optical Mouse
[    1.345473] usb 1-1.2: Manufacturer: Logitech
[    1.375061] tsc: Refined TSC clocksource calibration: 1596.374 MHz
[    1.375078] Switching to clocksource tsc
[    1.415258] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    1.431070] ata4: SATA link down (SStatus 0 SControl 300)
[    1.671353] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018
[    1.671375] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.671389] usb 1-1.4: Product: WebCam SC-13HDL11431N
[    1.671399] usb 1-1.4: Manufacturer: 123
[    1.750873] ata5: SATA link down (SStatus 0 SControl 300)
[    1.752032] Freeing unused kernel memory: 1340k freed
[    1.752237] Write protecting the kernel read-only data: 12288k
[    1.755326] Freeing unused kernel memory: 1220k freed
[    1.757906] Freeing unused kernel memory: 1072k freed
[    1.777925] udevd[121]: starting version 175
[    1.857230] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.857637] r8169 0000:02:00.0: irq 47 for MSI/MSI-X
[    1.858062] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47
[    1.858072] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.860426] hidraw: raw HID events driver (C) Jiri Kosina
[    1.867001] usbcore: registered new interface driver usbhid
[    1.867012] usbhid: USB HID core driver
[    1.914706] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[    1.931966] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[    1.932270] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[    2.011161] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
[    2.011180] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.793267] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[   24.226020] Adding 262140k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262140k FS
[   24.246008] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[   24.259108] udevd[603]: starting version 175
[   24.438574] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[   24.438585] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.438591] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   24.438596] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.438598] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   24.438603] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.438605] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   24.438609] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.438611] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   24.763317] lp: driver loaded but no devices found
[   24.848039] wmi: Mapper loaded
[   24.850016] samsung_laptop: detected SABI interface: SwSmi@
[   24.850020] samsung_laptop: Backlight controlled by ACPI video driver
[   24.871779] cfg80211: Calling CRDA to update world regulatory domain
[   24.925189] Bluetooth: Core ver 2.16
[   24.925226] NET: Registered protocol family 31
[   24.925228] Bluetooth: HCI device and connection manager initialized
[   24.925243] Bluetooth: HCI socket layer initialized
[   24.925253] Bluetooth: L2CAP socket layer initialized
[   24.925273] Bluetooth: SCO socket layer initialized
[   25.033724] Linux video capture interface: v2.00
[   25.097074] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[   25.302157] type=1400 audit(1366408696.319:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=801 comm="apparmor_parser"
[   25.302203] type=1400 audit(1366408696.319:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=717 comm="apparmor_parser"
[   25.302802] type=1400 audit(1366408696.319:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=801 comm="apparmor_parser"
[   25.302975] type=1400 audit(1366408696.319:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=717 comm="apparmor_parser"
[   25.303163] type=1400 audit(1366408696.319:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=801 comm="apparmor_parser"
[   25.303465] type=1400 audit(1366408696.319:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=717 comm="apparmor_parser"
[   25.502206] cfg80211: World regulatory domain updated:
[   25.502212] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   25.502216] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.502219] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.502221] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.502223] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.502226] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.503975] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[   25.506503] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[   25.508424] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[   25.510445] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   25.563029] usbcore: registered new interface driver btusb
[   25.654071] [drm] Initialized drm 1.1.0 20060810
[   26.043300] init: failsafe main process (933) killed by TERM signal
[   26.136748] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[   26.136753] Copyright(c) 2003-2013 Intel Corporation
[   26.137146] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X
[   26.138203] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   26.162267] Bluetooth: RFCOMM TTY layer initialized
[   26.162285] Bluetooth: RFCOMM socket layer initialized
[   26.162287] Bluetooth: RFCOMM ver 1.11
[   26.163652] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.163656] Bluetooth: BNEP filters: protocol multicast
[   26.163671] Bluetooth: BNEP socket layer initialized
[   26.173197] ppdev: user-space parallel port driver
[   26.253102] type=1400 audit(1366408697.267:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1072 comm="apparmor_parser"
[   26.259740] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[   26.262023] type=1400 audit(1366408697.279:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1072 comm="apparmor_parser"
[   26.262540] type=1400 audit(1366408697.279:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1072 comm="apparmor_parser"
[   26.279569] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input5
[   26.279719] usbcore: registered new interface driver uvcvideo
[   26.279723] USB Video Class driver (1.1.1)
[   26.333832] type=1400 audit(1366408697.351:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1071 comm="apparmor_parser"
[   26.550850] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[   26.554751] [drm] Memory usable by graphics device = 2048M
[   26.554759] i915 0000:00:02.0: setting latency timer to 64
[   26.565951] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[   26.587980] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[   26.588001] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   26.588003] [drm] Driver supports precise vblank timestamp query.
[   26.588199] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   26.598566] [drm] Wrong MCH_SSKPD value: 0x16040307
[   26.598571] [drm] This can cause pipe underruns and display issues.
[   26.598573] [drm] Please upgrade your BIOS to fix this.
[   26.609823] fbcon: inteldrmfb (fb0) is primary device
[   26.658477] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled
[   26.658478] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   26.658479] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   26.658480] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[   26.658481] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
[   26.658483] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[   26.658533] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   26.677335] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[   26.696914] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   26.707443] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   26.714368] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   27.105909] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   27.112523] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   27.307525] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   27.568740] Console: switching to colour frame buffer device 170x48
[   27.571658] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   27.571660] i915 0000:00:02.0: registered panic notifier
[   27.589794] acpi device:33: registered as cooling_device9
[   27.590258] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   27.592253] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   27.592697] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   27.593075] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[   27.610606] init: alsa-restore main process (1171) terminated with status 19
[   27.671222] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   27.671538] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   27.671828] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   27.800656] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   33.545768] wlan0: authenticate with 00:04:0e:e4:00:3d
[   33.550828] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[   33.552667] wlan0: authenticated
[   33.552835] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   33.552841] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   33.556278] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[   33.560798] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[   33.564309] wlan0: associated
[   33.564407] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   87.982724] cpufreq_ondemand: od_init: tuners ffff88008843b480
[  140.517380] show_signal_msg: 45 callbacks suppressed
[  140.517394] firefox[4032]: segfault at 7f7ebcab5768 ip 00007f7ebca97362 sp 00007fff16ce2068 error 7 in libGL.so.1.2.0[7f7ebca97000+7b000]
[  173.498222] BUG: unable to handle kernel paging request at ffffffffffffffd5
[  173.498286] IP: [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  173.498340] PGD 1c10067 PUD 1c12067 PMD 0 
[  173.498380] Oops: 0002 [#1] SMP 
[  173.498408] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek coretemp kvm_intel kvm joydev snd_hda_intel arc4 snd_hda_codec iwldvm ghash_clmulni_intel aesni_intel snd_hwdep i915 snd_pcm aes_x86_64 mac80211 glue_helper snd_page_alloc lrw snd_seq_midi gf128mul snd_seq_midi_event uvcvideo ablk_helper parport_pc snd_rawmidi cryptd ppdev bnep i2c_algo_bit rfcomm iwlwifi snd_seq videobuf2_vmalloc drm_kms_helper snd_timer videobuf2_memops drm psmouse snd_seq_device btusb videobuf2_core microcode videodev bluetooth snd cfg80211 samsung_laptop wmi serio_raw soundcore lp video mac_hid lpc_ich parport hid_generic usbhid hid r8169
[  173.498764] CPU: 1 PID: 6887 Comm: tr Not tainted 3.9.0-rc7-next20130419-8-iniza-small #1
[  173.498801] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[  173.498851] task: ffff88000cd24700 ti: ffff88000cd26000 task.ti: ffff88000cd26000
[  173.498883] RIP: 0010:[<ffffffff81043b59>]  [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  173.500012] RSP: 0018:ffff88000cd27e18  EFLAGS: 00010292
[  173.501146] RAX: 0000000000010000 RBX: ffff88000cd24700 RCX: 00000000ffffffff
[  173.502659] RDX: ffffffffffffffd5 RSI: 0000000000000004 RDI: ffffffffffffffd5
[  173.504253] RBP: ffff88000cd27e18 R08: ffff880014275f20 R09: 0000000000000000
[  173.505833] R10: 0000000000000001 R11: 0000000000000024 R12: ffffffffffffffd5
[  173.507419] R13: 0000000000000000 R14: ffff88000cd24700 R15: ffff88000db3bac8
[  173.508977] FS:  0000000000000000(0000) GS:ffff88011fa40000(0000) knlGS:0000000000000000
[  173.510588] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  173.512180] CR2: ffffffffffffffd5 CR3: 0000000001c0d000 CR4: 00000000000407e0
[  173.513774] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  173.515355] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  173.516932] Stack:
[  173.518496]  ffff88000cd27e28 ffffffff816bf6de ffff88000cd27ea8 ffffffff812bb825
[  173.520124]  ffff88000cd24700 ffff8800127ebac0 ffff88000db3bac0 ffff88000db3bac4
[  173.521758]  ffff8800127ebac0 ffff8800127ebac0 ffff88000cd27ea8 ffff88003a384b40
[  173.523391] Call Trace:
[  173.525018]  [<ffffffff816bf6de>] _raw_spin_lock+0xe/0x20
[  173.526670]  [<ffffffff812bb825>] exit_sem+0xb5/0x310
[  173.528343]  [<ffffffff8105df2a>] do_exit+0x2aa/0xa80
[  173.529987]  [<ffffffff8115ce80>] ? do_munmap+0x270/0x3e0
[  173.531642]  [<ffffffff8105e794>] do_group_exit+0x44/0xa0
[  173.533287]  [<ffffffff8105e807>] SyS_exit_group+0x17/0x20
[  173.534915]  [<ffffffff816c83dd>] system_call_fastpath+0x1a/0x1f
[  173.536542] Code: 00 00 48 c7 c1 61 39 04 81 48 c7 c2 5e 39 04 81 e9 dd fe ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 b8 00 00 01 00 48 89 e5 <f0> 0f c1 07 89 c2 c1 ea 10 66 39 c2 74 13 66 0f 1f 84 00 00 00 
[  173.540233] RIP  [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  173.542091]  RSP <ffff88000cd27e18>
[  173.543947] CR2: ffffffffffffffd5
[  173.554229] ---[ end trace acf6cbce4efdda31 ]---
[  173.554233] BUG: unable to handle kernel paging request at ffffffffffffffd5
[  173.554241] IP: [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  173.554244] PGD 1c10067 PUD 1c12067 PMD 0 
[  173.554247] Oops: 0002 [#2] SMP 
[  173.554288] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek coretemp kvm_intel kvm joydev snd_hda_intel arc4 snd_hda_codec iwldvm ghash_clmulni_intel aesni_intel snd_hwdep i915 snd_pcm aes_x86_64 mac80211 glue_helper snd_page_alloc lrw snd_seq_midi gf128mul snd_seq_midi_event uvcvideo ablk_helper parport_pc snd_rawmidi cryptd ppdev bnep i2c_algo_bit rfcomm iwlwifi snd_seq videobuf2_vmalloc drm_kms_helper snd_timer videobuf2_memops drm psmouse snd_seq_device btusb videobuf2_core microcode videodev bluetooth snd cfg80211 samsung_laptop wmi serio_raw soundcore lp video mac_hid lpc_ich parport hid_generic usbhid hid r8169
[  173.554291] CPU: 0 PID: 6889 Comm: tr Tainted: G      D      3.9.0-rc7-next20130419-8-iniza-small #1
[  173.554292] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[  173.554294] task: ffff88000cd60780 ti: ffff88000cd62000 task.ti: ffff88000cd62000
[  173.554298] RIP: 0010:[<ffffffff81043b59>]  [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  173.554299] RSP: 0018:ffff88000cd63e18  EFLAGS: 00010292
[  173.554301] RAX: 0000000000010000 RBX: ffff88000cd60780 RCX: 00000000ffffffff
[  173.554302] RDX: ffffffffffffffd5 RSI: 0000000000000004 RDI: ffffffffffffffd5
[  173.554303] RBP: ffff88000cd63e18 R08: ffff88006b505b10 R09: 0000000000000000
[  173.554304] R10: 0000000000000001 R11: ffff88011f023200 R12: ffffffffffffffd5
[  173.554305] R13: 0000000000000000 R14: ffff88000cd60780 R15: ffff88000d9f4508
[  173.554307] FS:  0000000000000000(0000) GS:ffff88011fa00000(0000) knlGS:0000000000000000
[  173.554308] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  173.554309] CR2: ffffffffffffffd5 CR3: 0000000001c0d000 CR4: 00000000000407f0
[  173.554310] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  173.554311] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  173.554312] Stack:
[  173.554315]  ffff88000cd63e28 ffffffff816bf6de ffff88000cd63ea8 ffffffff812bb825
[  173.554318]  ffff88000cd60780 ffff8800915a5b40 ffff88000d9f4500 ffff88000d9f4504
[  173.554321]  ffff8800915a5b40 ffff8800915a5b40 ffff88000cd63ea8 ffff88003a384cc0
[  173.554322] Call Trace:
[  173.554327]  [<ffffffff816bf6de>] _raw_spin_lock+0xe/0x20
[  173.554332]  [<ffffffff812bb825>] exit_sem+0xb5/0x310
[  173.554337]  [<ffffffff8105df2a>] do_exit+0x2aa/0xa80
[  173.554341]  [<ffffffff8115ce80>] ? do_munmap+0x270/0x3e0
[  173.554343]  [<ffffffff8105e794>] do_group_exit+0x44/0xa0
[  173.554346]  [<ffffffff8105e807>] SyS_exit_group+0x17/0x20
[  173.554350]  [<ffffffff816c83dd>] system_call_fastpath+0x1a/0x1f
[  173.554376] Code: 00 00 48 c7 c1 61 39 04 81 48 c7 c2 5e 39 04 81 e9 dd fe ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 b8 00 00 01 00 48 89 e5 <f0> 0f c1 07 89 c2 c1 ea 10 66 39 c2 74 13 66 0f 1f 84 00 00 00 
[  173.554379] RIP  [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  173.554379]  RSP <ffff88000cd63e18>
[  173.554380] CR2: ffffffffffffffd5
[  173.554382] ---[ end trace acf6cbce4efdda32 ]---
[  173.554383] Fixing recursive fault but reboot is needed!
[  173.554514] Fixing recursive fault but reboot is needed!
[  173.652493] BUG: unable to handle kernel paging request at ffffffffffffffd5
[  173.653876] IP: [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  173.655261] PGD 1c10067 PUD 1c12067 PMD 0 
[  173.656649] Oops: 0002 [#3] SMP 
[  173.658038] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek coretemp kvm_intel kvm joydev snd_hda_intel arc4 snd_hda_codec iwldvm ghash_clmulni_intel aesni_intel snd_hwdep i915 snd_pcm aes_x86_64 mac80211 glue_helper snd_page_alloc lrw snd_seq_midi gf128mul snd_seq_midi_event uvcvideo ablk_helper parport_pc snd_rawmidi cryptd ppdev bnep i2c_algo_bit rfcomm iwlwifi snd_seq videobuf2_vmalloc drm_kms_helper snd_timer videobuf2_memops drm psmouse snd_seq_device btusb videobuf2_core microcode videodev bluetooth snd cfg80211 samsung_laptop wmi serio_raw soundcore lp video mac_hid lpc_ich parport hid_generic usbhid hid r8169
[  173.664238] CPU: 2 PID: 6157 Comm: cc1 Tainted: G      D      3.9.0-rc7-next20130419-8-iniza-small #1
[  173.665814] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[  173.667426] task: ffff88000d640300 ti: ffff88000cc20000 task.ti: ffff88000cc20000
[  173.669007] RIP: 0010:[<ffffffff81043b59>]  [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  173.670571] RSP: 0018:ffff88000cc21e18  EFLAGS: 00010292
[  173.672098] RAX: 0000000000010000 RBX: ffff88000d640300 RCX: 00000000ffffffff
[  173.673597] RDX: ffffffffffffffd5 RSI: 0000000000000004 RDI: ffffffffffffffd5
[  173.675082] RBP: ffff88000cc21e18 R08: ffff88002c75c7d0 R09: 0000000000000000
[  173.676532] R10: 0000000000000001 R11: ffff880119fc9a00 R12: ffffffffffffffd5
[  173.677959] R13: 0000000000000000 R14: ffff88000d640300 R15: ffff88003856b348
[  173.679372] FS:  0000000000000000(0000) GS:ffff88011fa80000(0000) knlGS:0000000000000000
[  173.680780] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  173.682198] CR2: ffffffffffffffd5 CR3: 0000000001c0d000 CR4: 00000000000407e0
[  173.683615] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  173.685032] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  173.686448] Stack:
[  173.687846]  ffff88000cc21e28 ffffffff816bf6de ffff88000cc21ea8 ffffffff812bb825
[  173.689289]  ffff88000d640300 ffff8800949cfc00 ffff88003856b340 ffff88003856b344
[  173.690714]  ffff8800949cfc00 ffff8800949cfc00 ffff88000cc21ea8 ffff880038638f40
[  173.692119] Call Trace:
[  173.693519]  [<ffffffff816bf6de>] _raw_spin_lock+0xe/0x20
[  173.694928]  [<ffffffff812bb825>] exit_sem+0xb5/0x310
[  173.696318]  [<ffffffff8105df2a>] do_exit+0x2aa/0xa80
[  173.697689]  [<ffffffff8115ce80>] ? do_munmap+0x270/0x3e0
[  173.699064]  [<ffffffff8105e794>] do_group_exit+0x44/0xa0
[  173.700438]  [<ffffffff8105e807>] SyS_exit_group+0x17/0x20
[  173.701806]  [<ffffffff816c83dd>] system_call_fastpath+0x1a/0x1f
[  173.703172] Code: 00 00 48 c7 c1 61 39 04 81 48 c7 c2 5e 39 04 81 e9 dd fe ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 b8 00 00 01 00 48 89 e5 <f0> 0f c1 07 89 c2 c1 ea 10 66 39 c2 74 13 66 0f 1f 84 00 00 00 
[  173.706251] RIP  [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  173.707770]  RSP <ffff88000cc21e18>
[  173.709283] CR2: ffffffffffffffd5
[  173.710791] ---[ end trace acf6cbce4efdda33 ]---
[  173.710793] Fixing recursive fault but reboot is needed!
[  174.022963] BUG: unable to handle kernel paging request at ffffffffffffffd5
[  174.024512] IP: [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  174.025888] PGD 1c10067 PUD 1c12067 PMD 0 
[  174.027134] Oops: 0002 [#4] SMP 
[  174.028349] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek coretemp kvm_intel kvm joydev snd_hda_intel arc4 snd_hda_codec iwldvm ghash_clmulni_intel aesni_intel snd_hwdep i915 snd_pcm aes_x86_64 mac80211 glue_helper snd_page_alloc lrw snd_seq_midi gf128mul snd_seq_midi_event uvcvideo ablk_helper parport_pc snd_rawmidi cryptd ppdev bnep i2c_algo_bit rfcomm iwlwifi snd_seq videobuf2_vmalloc drm_kms_helper snd_timer videobuf2_memops drm psmouse snd_seq_device btusb videobuf2_core microcode videodev bluetooth snd cfg80211 samsung_laptop wmi serio_raw soundcore lp video mac_hid lpc_ich parport hid_generic usbhid hid r8169
[  174.033891] CPU: 0 PID: 6670 Comm: cc1 Tainted: G      D      3.9.0-rc7-next20130419-8-iniza-small #1
[  174.035265] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[  174.036676] task: ffff88000dac4540 ti: ffff88000d300000 task.ti: ffff88000d300000
[  174.038114] RIP: 0010:[<ffffffff81043b59>]  [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  174.039505] RSP: 0018:ffff88000d301e18  EFLAGS: 00010292
[  174.040888] RAX: 0000000000010000 RBX: ffff88000dac4540 RCX: 00000000ffffffff
[  174.042220] RDX: ffffffffffffffd5 RSI: 0000000000000004 RDI: ffffffffffffffd5
[  174.043521] RBP: ffff88000d301e18 R08: ffff88000d829d80 R09: 0000000000000000
[  174.044812] R10: 0000000000000001 R11: ffff88011f023200 R12: ffffffffffffffd5
[  174.046096] R13: 0000000000000000 R14: ffff88000dac4540 R15: ffff880038542528
[  174.047352] FS:  0000000000000000(0000) GS:ffff88011fa00000(0000) knlGS:0000000000000000
[  174.048638] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  174.049897] CR2: ffffffffffffffd5 CR3: 0000000001c0d000 CR4: 00000000000407f0
[  174.051133] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  174.052372] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  174.053632] Stack:
[  174.054854]  ffff88000d301e28 ffffffff816bf6de ffff88000d301ea8 ffffffff812bb825
[  174.056108]  ffff88000dac4540 ffff88009519b480 ffff880038542520 ffff880038542524
[  174.057398]  ffff88009519b480 ffff88009519b480 ffff88000d301ea8 ffff88003a384540
[  174.058638] Call Trace:
[  174.059853]  [<ffffffff816bf6de>] _raw_spin_lock+0xe/0x20
[  174.061097]  [<ffffffff812bb825>] exit_sem+0xb5/0x310
[  174.062314]  [<ffffffff8105df2a>] do_exit+0x2aa/0xa80
[  174.063521]  [<ffffffff8115ce80>] ? do_munmap+0x270/0x3e0
[  174.064715]  [<ffffffff8105e794>] do_group_exit+0x44/0xa0
[  174.065933]  [<ffffffff8105e807>] SyS_exit_group+0x17/0x20
[  174.067183]  [<ffffffff816c83dd>] system_call_fastpath+0x1a/0x1f
[  174.068368] Code: 00 00 48 c7 c1 61 39 04 81 48 c7 c2 5e 39 04 81 e9 dd fe ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 b8 00 00 01 00 48 89 e5 <f0> 0f c1 07 89 c2 c1 ea 10 66 39 c2 74 13 66 0f 1f 84 00 00 00 
[  174.071062] RIP  [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  174.072376]  RSP <ffff88000d301e18>
[  174.073711] CR2: ffffffffffffffd5
[  174.075018] ---[ end trace acf6cbce4efdda34 ]---
[  174.075020] Fixing recursive fault but reboot is needed!

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
  2013-04-19 22:12                     ` Sedat Dilek
@ 2013-04-19 22:34                       ` Sedat Dilek
  2013-04-19 22:50                         ` Linus Torvalds
  0 siblings, 1 reply; 21+ messages in thread
From: Sedat Dilek @ 2013-04-19 22:34 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Davidlohr Bueso, Rik van Riel, Daniel Vetter, Stephen Rothwell,
	linux-next, Linux Kernel Mailing List, the arch/x86 maintainers,
	Ingo Molnar, Thomas Gleixner, Paul McKenney, Paul McKenney, DRI,
	Dave Airlie, Emmanuel Benisty

[-- Attachment #1: Type: text/plain, Size: 938 bytes --]

On Sat, Apr 20, 2013 at 12:12 AM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> On Fri, Apr 19, 2013 at 11:24 PM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
>> On Fri, Apr 19, 2013 at 2:09 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>>>
>>> I have applied all three patches and see still call-traces.
>>> New are apparmor related messages.
>>
>> Can you try the crazy rcu double-free debug hack?
>>
>> See
>>
>>     https://lkml.org/lkml/2013/3/30/113
>>
>> and I'm re-attaching the ugly-ass crazy hack patch here too..
>>
>>                     Linus
>
> Attached the dmesg with some call-traces inside.
>
> I am building a -9 kernel with Paul's kconfig recommendations...
>
> CONFIG_DEBUG_OBJECTS=y
> CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
> CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
>
> ...and will report.
>

See attached dmesg.
AFAICS no more debug-infos.

# CONFIG_DEBUG_SPINLOCK is not set <--- Enable?

- Sedat -

> - Sedat -

[-- Attachment #2: dmesg_3.9.0-rc7-next20130419-9-iniza-small_RCU-DOUBLE-FREE-HACK_CONFIG_DEBUG_OBJECTS_RCU_HEAD-y.txt --]
[-- Type: text/plain, Size: 68236 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.9.0-rc7-next20130419-9-iniza-small (sedat.dilek@gmail.com@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Sat Apr 20 00:21:15 CEST 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc7-next20130419-9-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask FE0000000 write-back
[    0.000000]   6 base 11FE00000 mask FFFE00000 uncachable
[    0.000000]   7 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fea000, 0x01feafff] PGTABLE
[    0.000000] BRK [0x01feb000, 0x01febfff] PGTABLE
[    0.000000] BRK [0x01fec000, 0x01fecfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff]
[    0.000000]  [mem 0x11fc00000-0x11fdfffff] page 2M
[    0.000000] BRK [0x01fed000, 0x01fedfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff]
[    0.000000]  [mem 0x11c000000-0x11fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff]
[    0.000000]  [mem 0x40200000-0xd9bfffff] page 2M
[    0.000000]  [mem 0xd9c00000-0xd9c9efff] page 4k
[    0.000000] BRK [0x01fee000, 0x01feefff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[    0.000000]  [mem 0xdafff000-0xdaffffff] page 4k
[    0.000000] RAMDISK: [mem 0x379ae000-0x37ccefff]
[    0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[    0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD  SNB-CPT 00000000 INTL 20061109)
[    0.000000] ACPI: FACS 00000000daf47000 00040
[    0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[    0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000dafea000 00996 (v01  PmRef    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL      COMBUF 00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01   Iffs  IffsAsl 00003000 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff]
[    0.000000]   NODE_DATA [mem 0x11fdf8000-0x11fdfbfff]
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x11fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xd9c9efff]
[    0.000000]   node   0: [mem 0xdafff000-0xdaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x11fdfffff]
[    0.000000] On node 0 totalpages: 1021500
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12127 pages used for memmap
[    0.000000]   DMA32 zone: 886944 pages, LIFO batch:31
[    0.000000]   Normal zone: 1785 pages used for memmap
[    0.000000]   Normal zone: 130560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000
[    0.000000] PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000
[    0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
[    0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
[    0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[    0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[    0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[    0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fa00000 s85376 r8192 d21120 u262144
[    0.000000] pcpu-alloc: s85376 r8192 d21120 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1007376
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc7-next20130419-9-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3939232k/4716544k available (6965k kernel code, 630544k absent, 146768k reserved, 6300k data, 1364k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] ODEBUG: 0 of 0 active objects replaced
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1596.514 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.02 BogoMIPS (lpj=6386056)
[    0.000009] pid_max: default: 32768 minimum: 301
[    0.000136] Security Framework initialized
[    0.000148] AppArmor: AppArmor initialized
[    0.000150] Yama: becoming mindful.
[    0.000537] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001600] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002064] Mount-cache hash table entries: 256
[    0.002571] Initializing cgroup subsys memory
[    0.002636] Initializing cgroup subsys devices
[    0.002640] Initializing cgroup subsys freezer
[    0.002643] Initializing cgroup subsys blkio
[    0.002646] Initializing cgroup subsys perf_event
[    0.002651] Initializing cgroup subsys hugetlb
[    0.002731] Disabled fast string operations
[    0.002735] CPU: Physical Processor ID: 0
[    0.002737] CPU: Processor Core ID: 0
[    0.002744] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.002744] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002751] mce: CPU supports 7 MCE banks
[    0.002768] CPU0: Thermal monitoring enabled (TM1)
[    0.002779] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.002779] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.002779] tlb_flushall_shift: 5
[    0.002870] Freeing SMP alternatives: 24k freed
[    0.005112] ACPI: Core revision 20130328
[    0.015544] ACPI: All ACPI Tables successfully acquired
[    0.017104] ftrace: allocating 26395 entries in 104 pages
[    0.032137] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.071802] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
[    0.071813] TSC deadline timer enabled
[    0.071826] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[    0.071838] ... version:                3
[    0.071840] ... bit width:              48
[    0.071842] ... generic registers:      4
[    0.071845] ... value mask:             0000ffffffffffff
[    0.071847] ... max period:             000000007fffffff
[    0.071850] ... fixed-purpose events:   3
[    0.071852] ... event mask:             000000070000000f
[    0.084858] Disabled fast string operations
[    0.088026] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.099558] Disabled fast string operations
[    0.113099] Disabled fast string operations
[    0.073822] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.115221] Brought up 4 CPUs
[    0.115230] smpboot: Total of 4 processors activated (12772.11 BogoMIPS)
[    0.119202] devtmpfs: initialized
[    0.121077] EVM: security.selinux
[    0.121080] EVM: security.SMACK64
[    0.121082] EVM: security.capability
[    0.121161] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
[    0.122592] regulator-dummy: no parameters
[    0.122731] NET: Registered protocol family 16
[    0.123042] ACPI: bus type PCI registered
[    0.123151] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.123157] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.129816] PCI: Using configuration type 1 for base access
[    0.132866] bio: create slab <bio-0> at 0
[    0.133240] ACPI: Added _OSI(Module Device)
[    0.133245] ACPI: Added _OSI(Processor Device)
[    0.133248] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.133251] ACPI: Added _OSI(Processor Aggregator Device)
[    0.134847] ACPI: EC: Look up EC in DSDT
[    0.163256] ACPI: Executed 1 blocks of module-level executable AML code
[    0.169087] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.181324] ACPI: SSDT 00000000dae70718 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.181800] ACPI: Dynamic OEM Table Load:
[    0.181804] ACPI: SSDT           (null) 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.191720] ACPI: SSDT 00000000dae71a98 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.192260] ACPI: Dynamic OEM Table Load:
[    0.192264] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.203413] ACPI: SSDT 00000000dae6fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.203849] ACPI: Dynamic OEM Table Load:
[    0.203853] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.217745] ACPI: Interpreter enabled
[    0.217763] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[    0.217778] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130328/hwxface-568)
[    0.217789] ACPI: (supports S0 S1 S3 S5)
[    0.217792] ACPI: Using IOAPIC for interrupt routing
[    0.217850] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.241149] ACPI: Power Resource [FN00] (off)
[    0.241327] ACPI: Power Resource [FN01] (off)
[    0.241500] ACPI: Power Resource [FN02] (off)
[    0.241671] ACPI: Power Resource [FN03] (off)
[    0.241846] ACPI: Power Resource [FN04] (off)
[    0.242891] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.243234] \_SB_.PCI0:_OSC invalid UUID
[    0.243236] _OSC request data:1 8 0 
[    0.244212] PCI host bridge to bus 0000:00
[    0.244218] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.244222] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.244226] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.244230] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.244233] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[    0.244237] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.244255] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.244405] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.244417] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.244424] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.244429] pci 0000:00:02.0: reg 20: [io  0x3000-0x303f]
[    0.244596] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.244621] pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit]
[    0.244704] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.244856] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.244880] pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff]
[    0.244978] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.245075] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.245092] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit]
[    0.245168] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.245209] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.245273] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.245361] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.245407] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.245472] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.245559] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.245614] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.245681] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.245811] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.245936] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.245959] pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff]
[    0.246057] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.246151] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.246336] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.246357] pci 0000:00:1f.2: reg 10: [io  0x3088-0x308f]
[    0.246366] pci 0000:00:1f.2: reg 14: [io  0x3094-0x3097]
[    0.246375] pci 0000:00:1f.2: reg 18: [io  0x3080-0x3087]
[    0.246384] pci 0000:00:1f.2: reg 1c: [io  0x3090-0x3093]
[    0.246392] pci 0000:00:1f.2: reg 20: [io  0x3060-0x307f]
[    0.246401] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff]
[    0.246452] pci 0000:00:1f.2: PME# supported from D3hot
[    0.246561] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.246578] pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit]
[    0.246601] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
[    0.246961] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
[    0.247152] pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit]
[    0.247903] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.248056] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.255394] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.255403] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.255567] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.255637] pci 0000:02:00.0: reg 10: [io  0x2000-0x20ff]
[    0.255759] pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref]
[    0.255834] pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]
[    0.256170] pci 0000:02:00.0: supports D1 D2
[    0.256172] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.256297] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.263312] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.263326] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.263350] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.263544] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.263581] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit]
[    0.263779] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.271307] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.271326] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.271522] \_SB_.PCI0:_OSC invalid UUID
[    0.271523] _OSC request data:1 1f 0 
[    0.271528] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.271532] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.272345] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.272460] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.272576] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.272688] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.272800] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.272913] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.273027] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.273139] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.273652] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.273662] acpi root: \_SB_.PCI0 notify handler is installed
[    0.273721] Found 1 acpi root devices
[    0.273782] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.273983] ACPI: No dock devices found.
[    0.274169] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.274175] vgaarb: loaded
[    0.274177] vgaarb: bridge control possible 0000:00:02.0
[    0.274813] SCSI subsystem initialized
[    0.274817] ACPI: bus type ATA registered
[    0.274924] libata version 3.00 loaded.
[    0.274977] ACPI: bus type USB registered
[    0.275030] usbcore: registered new interface driver usbfs
[    0.275054] usbcore: registered new interface driver hub
[    0.275103] usbcore: registered new device driver usb
[    0.275391] PCI: Using ACPI for IRQ routing
[    0.277057] PCI: pci_cache_line_size set to 64 bytes
[    0.277160] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.277163] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
[    0.277165] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.277167] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[    0.277427] NetLabel: Initializing
[    0.277430] NetLabel:  domain hash size = 128
[    0.277433] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.277478] NetLabel:  unlabeled traffic allowed by default
[    0.277559] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.277568] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.279582] Switching to clocksource hpet
[    0.293782] AppArmor: AppArmor Filesystem Enabled
[    0.293840] pnp: PnP ACPI init
[    0.293857] ACPI: bus type PNP registered
[    0.294140] pnp 00:00: [dma 4]
[    0.294251] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.294290] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.294454] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.294503] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.294576] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.294581] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.294585] system 00:04: [io  0x5000-0x5003] has been reserved
[    0.294589] system 00:04: [io  0xffff] has been reserved
[    0.294595] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.294599] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.294603] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.294607] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.294611] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.294615] system 00:04: [io  0x5000-0x500f] could not be reserved
[    0.294619] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.294662] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.294749] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.294754] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.294808] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.294890] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[    0.295196] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.295201] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.295206] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.295210] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.295214] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.295218] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.295222] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.295226] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.295231] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.295235] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.295240] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.295905] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.295943] pnp: PnP ACPI: found 11 devices
[    0.295946] ACPI: bus type PNP unregistered
[    0.303187] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.303196] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.303209] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.303214] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.303224] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.303234] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.303241] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.303667] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.303669] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.303672] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.303673] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[    0.303675] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.303677] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[    0.303679] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.303681] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.303683] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.303798] NET: Registered protocol family 2
[    0.304133] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.304284] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.304380] TCP: Hash tables configured (established 32768 bind 32768)
[    0.304643] TCP: reno registered
[    0.304655] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.304676] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.304864] NET: Registered protocol family 1
[    0.304884] pci 0000:00:02.0: Boot video device
[    0.305615] PCI: CLS 64 bytes, default 64
[    0.305816] Trying to unpack rootfs image as initramfs...
[    0.376736] Freeing initrd memory: 3204k freed
[    0.377420] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.377429] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff]
[    0.377735] Scanning for low memory corruption every 60 seconds
[    0.378083] Initialise module verification
[    0.378144] audit: initializing netlink socket (disabled)
[    0.378164] type=2000 audit(1366417593.376:1): initialized
[    0.408445] bounce pool size: 64 pages
[    0.408470] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.409066] VFS: Disk quotas dquot_6.5.2
[    0.409108] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.409806] fuse init (API version 7.21)
[    0.409897] msgmni has been set to 7700
[    0.410419] Key type asymmetric registered
[    0.410422] Asymmetric key parser 'x509' registered
[    0.410467] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.410517] io scheduler noop registered
[    0.410520] io scheduler deadline registered (default)
[    0.410551] io scheduler cfq registered
[    0.410927] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.410969] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.411054] intel_idle: MWAIT substates: 0x21120
[    0.411056] intel_idle: v0.4 model 0x2A
[    0.411057] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.411497] ACPI: AC Adapter [ADP1] (on-line)
[    0.411803] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.411913] ACPI: Lid Switch [LID0]
[    0.411991] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.412000] ACPI: Power Button [PWRB]
[    0.412063] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.412069] ACPI: Power Button [PWRF]
[    0.412171] ACPI: Fan [FAN0] (off)
[    0.412221] ACPI: Fan [FAN1] (off)
[    0.412269] ACPI: Fan [FAN2] (off)
[    0.412318] ACPI: Fan [FAN3] (off)
[    0.412367] ACPI: Fan [FAN4] (off)
[    0.412463] ACPI: Requesting acpi_cpufreq
[    0.419612] thermal LNXTHERM:00: registered as thermal_zone0
[    0.419618] ACPI: Thermal Zone [TZ00] (67 C)
[    0.420023] thermal LNXTHERM:01: registered as thermal_zone1
[    0.420027] ACPI: Thermal Zone [TZ01] (30 C)
[    0.420073] GHES: HEST is not enabled!
[    0.420347] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.425335] ACPI: Battery Slot [BAT1] (battery present)
[    0.425354] Linux agpgart interface v0.103
[    0.427546] brd: module loaded
[    0.428631] loop: module loaded
[    0.428840] mei_me 0000:00:16.0: setting latency timer to 64
[    0.428904] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[    0.432688] ahci 0000:00:1f.2: version 3.0
[    0.432867] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    0.433077] ahci: SSS flag set, parallel bus scan disabled
[    0.447508] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[    0.447515] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    0.447523] ahci 0000:00:1f.2: setting latency timer to 64
[    0.472204] scsi0 : ahci
[    0.472348] scsi1 : ahci
[    0.472449] scsi2 : ahci
[    0.472551] scsi3 : ahci
[    0.472651] scsi4 : ahci
[    0.472795] scsi5 : ahci
[    0.472859] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41
[    0.472865] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41
[    0.472868] ata3: DUMMY
[    0.472872] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41
[    0.472877] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41
[    0.472880] ata6: DUMMY
[    0.473729] libphy: Fixed MDIO Bus: probed
[    0.473982] tun: Universal TUN/TAP device driver, 1.6
[    0.473985] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.474051] PPP generic driver version 2.4.2
[    0.474150] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.474154] ehci-pci: EHCI PCI platform driver
[    0.474328] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.474336] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.474345] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.474366] ehci-pci 0000:00:1a.0: debug port 2
[    0.478272] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.478317] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000
[    0.487460] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.487505] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.487509] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.487513] usb usb1: Product: EHCI Host Controller
[    0.487516] usb usb1: Manufacturer: Linux 3.9.0-rc7-next20130419-9-iniza-small ehci_hcd
[    0.487520] usb usb1: SerialNumber: 0000:00:1a.0
[    0.487667] hub 1-0:1.0: USB hub found
[    0.487676] hub 1-0:1.0: 2 ports detected
[    0.487936] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.487943] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.487950] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.487969] ehci-pci 0000:00:1d.0: debug port 2
[    0.491872] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.491916] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000
[    0.503451] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.503487] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.503490] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.503494] usb usb2: Product: EHCI Host Controller
[    0.503497] usb usb2: Manufacturer: Linux 3.9.0-rc7-next20130419-9-iniza-small ehci_hcd
[    0.503501] usb usb2: SerialNumber: 0000:00:1d.0
[    0.503627] hub 2-0:1.0: USB hub found
[    0.503635] hub 2-0:1.0: 2 ports detected
[    0.503749] ehci-platform: EHCI generic platform driver
[    0.503767] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.503799] uhci_hcd: USB Universal Host Controller Interface driver
[    0.503922] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.503932] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    0.513705] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.513712] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[    0.513718] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[    0.513727] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[    0.513733] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[    0.514008] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.514012] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.514016] usb usb3: Product: xHCI Host Controller
[    0.514019] usb usb3: Manufacturer: Linux 3.9.0-rc7-next20130419-9-iniza-small xhci_hcd
[    0.514023] usb usb3: SerialNumber: 0000:03:00.0
[    0.514117] xHCI xhci_add_endpoint called for root hub
[    0.514119] xHCI xhci_check_bandwidth called for root hub
[    0.514151] hub 3-0:1.0: USB hub found
[    0.514164] hub 3-0:1.0: 2 ports detected
[    0.514262] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.514270] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    0.514327] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.514331] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.514334] usb usb4: Product: xHCI Host Controller
[    0.514337] usb usb4: Manufacturer: Linux 3.9.0-rc7-next20130419-9-iniza-small xhci_hcd
[    0.514341] usb usb4: SerialNumber: 0000:03:00.0
[    0.514428] xHCI xhci_add_endpoint called for root hub
[    0.514429] xHCI xhci_check_bandwidth called for root hub
[    0.514462] hub 4-0:1.0: USB hub found
[    0.514473] hub 4-0:1.0: 2 ports detected
[    0.527503] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[    0.537306] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.537314] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.537502] mousedev: PS/2 mouse device common for all mice
[    0.537914] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.537949] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.538004] device-mapper: uevent: version 1.0.3
[    0.538070] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    0.538238] cpuidle: using governor ladder
[    0.538248] ledtrig-cpu: registered to indicate activity on CPUs
[    0.538251] EFI Variables Facility v0.08 2004-May-17
[    0.538471] ashmem: initialized
[    0.538614] TCP: cubic registered
[    0.538701] NET: Registered protocol family 10
[    0.539101] NET: Registered protocol family 17
[    0.539117] Key type dns_resolver registered
[    0.539501] PM: Hibernation image not present or could not be loaded.
[    0.539503] Loading module verification certificates
[    0.540605] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 087e04caff2d5119315f1ce59810bcf705fd6cf6'
[    0.540633] registered taskstats version 1
[    0.544026] Key type trusted registered
[    0.546457] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.547429] Key type encrypted registered
[    0.580444] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.580452] EDD information not available.
[    0.791352] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.792606] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[    0.792631] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.793690] ata1.00: configured for UDMA/133
[    0.794023] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[    0.794290] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.794296] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.794385] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.794421] sd 0:0:0:0: [sda] Write Protect is off
[    0.794426] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.794470] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.799320] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.806984]  sda: sda1 sda2 sda3
[    0.808222] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.931582] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    0.931593] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.932011] hub 1-1:1.0: USB hub found
[    0.932193] hub 1-1:1.0: 6 ports detected
[    1.043158] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.111121] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.111734] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133
[    1.111758] ata2.00: 31277232 sectors, multi 1: LBA48 
[    1.112448] ata2.00: configured for UDMA/133
[    1.112830] scsi 1:0:0:0: Direct-Access     ATA      SanDisk iSSD P4  SSD  PQ: 0 ANSI: 5
[    1.113085] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.113094] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    1.113318] sd 1:0:0:0: [sdb] Write Protect is off
[    1.113333] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.113508] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.114607]  sdb: sdb1 sdb2
[    1.115205] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.183514] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.183540] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.183938] hub 2-1:1.0: USB hub found
[    1.183995] hub 2-1:1.0: 6 ports detected
[    1.259112] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.357200] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e
[    1.357221] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.357227] usb 1-1.2: Product: USB-PS/2 Optical Mouse
[    1.357231] usb 1-1.2: Manufacturer: Logitech
[    1.378843] tsc: Refined TSC clocksource calibration: 1596.374 MHz
[    1.378857] Switching to clocksource tsc
[    1.430897] ata4: SATA link down (SStatus 0 SControl 300)
[    1.431130] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    1.695103] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018
[    1.695114] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.695120] usb 1-1.4: Product: WebCam SC-13HDL11431N
[    1.695124] usb 1-1.4: Manufacturer: 123
[    1.750661] ata5: SATA link down (SStatus 0 SControl 300)
[    1.751879] Freeing unused kernel memory: 1364k freed
[    1.752099] Write protecting the kernel read-only data: 12288k
[    1.755239] Freeing unused kernel memory: 1216k freed
[    1.757720] Freeing unused kernel memory: 1072k freed
[    1.780023] udevd[120]: starting version 175
[    1.878202] hidraw: raw HID events driver (C) Jiri Kosina
[    1.884975] usbcore: registered new interface driver usbhid
[    1.884984] usbhid: USB HID core driver
[    1.892576] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.892970] r8169 0000:02:00.0: irq 47 for MSI/MSI-X
[    1.893366] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47
[    1.893377] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.933173] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[    1.933398] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[    1.938577] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[    2.035405] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
[    2.035429] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.702601] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[   23.872690] Adding 262140k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262140k FS
[   23.900031] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[   23.944786] udevd[591]: starting version 175
[   24.098706] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[   24.098716] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.098722] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   24.098727] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.098729] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   24.098734] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.098745] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   24.098750] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.098752] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   24.317375] lp: driver loaded but no devices found
[   24.439242] wmi: Mapper loaded
[   24.440998] samsung_laptop: detected SABI interface: SwSmi@
[   24.441002] samsung_laptop: Backlight controlled by ACPI video driver
[   24.602035] cfg80211: Calling CRDA to update world regulatory domain
[   24.713113] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[   24.727022] Bluetooth: Core ver 2.16
[   24.728118] NET: Registered protocol family 31
[   24.728123] Bluetooth: HCI device and connection manager initialized
[   24.728139] Bluetooth: HCI socket layer initialized
[   24.728150] Bluetooth: L2CAP socket layer initialized
[   24.728172] Bluetooth: SCO socket layer initialized
[   24.728756] Linux video capture interface: v2.00
[   24.883790] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[   24.888299] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[   24.892988] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[   24.896235] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   24.936206] [drm] Initialized drm 1.1.0 20060810
[   24.968876] type=1400 audit(1366410417.982:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=801 comm="apparmor_parser"
[   24.969053] type=1400 audit(1366410417.982:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=801 comm="apparmor_parser"
[   24.969214] type=1400 audit(1366410417.982:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=801 comm="apparmor_parser"
[   24.998905] type=1400 audit(1366410418.014:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=705 comm="apparmor_parser"
[   24.999099] type=1400 audit(1366410418.014:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=705 comm="apparmor_parser"
[   24.999266] type=1400 audit(1366410418.014:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=705 comm="apparmor_parser"
[   25.020729] init: failsafe main process (937) killed by TERM signal
[   25.033664] cfg80211: World regulatory domain updated:
[   25.033670] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   25.033672] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.033674] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.033675] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.033677] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.033678] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.122406] ppdev: user-space parallel port driver
[   25.215230] usbcore: registered new interface driver btusb
[   25.283542] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.283547] Bluetooth: BNEP filters: protocol multicast
[   25.283559] Bluetooth: BNEP socket layer initialized
[   25.449752] Bluetooth: RFCOMM TTY layer initialized
[   25.449771] Bluetooth: RFCOMM socket layer initialized
[   25.449773] Bluetooth: RFCOMM ver 1.11
[   25.915365] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[   25.915370] Copyright(c) 2003-2013 Intel Corporation
[   25.915874] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X
[   25.916639] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   25.944328] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[   25.959550] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[   26.038712] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[   26.174911] type=1400 audit(1366410419.190:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1066 comm="apparmor_parser"
[   26.175266] type=1400 audit(1366410419.190:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1066 comm="apparmor_parser"
[   26.283284] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[   26.303001] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6
[   26.303185] usbcore: registered new interface driver uvcvideo
[   26.303189] USB Video Class driver (1.1.1)
[   26.378176] [drm] Memory usable by graphics device = 2048M
[   26.378185] i915 0000:00:02.0: setting latency timer to 64
[   26.408444] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[   26.408464] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   26.408466] [drm] Driver supports precise vblank timestamp query.
[   26.408740] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   26.424229] [drm] Wrong MCH_SSKPD value: 0x16040307
[   26.424234] [drm] This can cause pipe underruns and display issues.
[   26.424235] [drm] Please upgrade your BIOS to fix this.
[   26.439170] fbcon: inteldrmfb (fb0) is primary device
[   26.509889] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled
[   26.509890] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   26.509891] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   26.509892] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[   26.509893] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
[   26.509895] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[   26.509945] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   26.545204] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   26.563409] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   26.570988] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   26.920193] type=1400 audit(1366410419.934:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1112 comm="apparmor_parser"
[   26.957694] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   26.964333] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   27.158080] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   27.261524] type=1400 audit(1366410420.278:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1113 comm="apparmor_parser"
[   27.460787] Console: switching to colour frame buffer device 170x48
[   27.465482] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   27.465485] i915 0000:00:02.0: registered panic notifier
[   27.486863] acpi device:33: registered as cooling_device9
[   27.487323] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   27.487427] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   27.487790] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   27.488127] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[   27.549188] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   27.549517] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   27.549823] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   27.800371] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   33.362087] wlan0: authenticate with 00:04:0e:e4:00:3d
[   33.366622] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[   33.368395] wlan0: authenticated
[   33.368534] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   33.368539] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   33.372190] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[   33.375732] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[   33.380441] wlan0: associated
[   33.380549] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   36.054862] audit_printk_skb: 21 callbacks suppressed
[   36.054867] type=1400 audit(1366410429.078:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1114 comm="apparmor_parser"
[   36.055972] type=1400 audit(1366410429.078:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1114 comm="apparmor_parser"
[   36.056383] type=1400 audit(1366410429.078:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1114 comm="apparmor_parser"
[   36.057321] type=1400 audit(1366410429.078:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1114 comm="apparmor_parser"
[   36.058068] type=1400 audit(1366410429.078:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=1114 comm="apparmor_parser"
[   36.058417] type=1400 audit(1366410429.082:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=1114 comm="apparmor_parser"
[   36.059255] type=1400 audit(1366410429.082:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1114 comm="apparmor_parser"
[   36.059713] type=1400 audit(1366410429.082:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=1114 comm="apparmor_parser"
[   36.138030] init: alsa-restore main process (1289) terminated with status 99
[   49.866491] usb 2-1.5: USB disconnect, device number 3
[   96.394796] cpufreq_ondemand: od_init: tuners ffff880077808d00
[  101.091097] firefox[2339]: segfault at 7f5698db5768 ip 00007f5698d97362 sp 00007fffe9822568 error 7 in libGL.so.1.2.0[7f5698d97000+7b000]
[  199.605071] BUG: unable to handle kernel paging request at ffffffffffffffd5
[  199.608243] IP: [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  199.609835] PGD 1c10067 PUD 1c12067 PMD 0 
[  199.611416] Oops: 0002 [#1] SMP 
[  199.612977] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek coretemp kvm_intel arc4 kvm snd_hda_intel iwldvm snd_hda_codec ghash_clmulni_intel snd_hwdep aesni_intel mac80211 snd_pcm i915 aes_x86_64 glue_helper snd_page_alloc uvcvideo lrw snd_seq_midi joydev gf128mul snd_seq_midi_event ablk_helper iwlwifi snd_rawmidi cryptd videobuf2_vmalloc i2c_algo_bit snd_seq parport_pc videobuf2_memops rfcomm bnep btusb drm_kms_helper snd_timer ppdev videobuf2_core psmouse drm snd_seq_device bluetooth videodev microcode cfg80211 snd serio_raw soundcore samsung_laptop wmi mac_hid lp video lpc_ich parport hid_generic r8169 usbhid hid
[  199.620486] CPU: 0 PID: 6179 Comm: tr Not tainted 3.9.0-rc7-next20130419-9-iniza-small #1
[  199.622448] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[  199.624487] task: ffff88000a526480 ti: ffff88000a506000 task.ti: ffff88000a506000
[  199.626546] RIP: 0010:[<ffffffff81043b59>]  [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  199.628634] RSP: 0018:ffff88000a507e18  EFLAGS: 00010292
[  199.630676] RAX: 0000000000010000 RBX: ffff88000a526480 RCX: 00000000ffffffff
[  199.632688] RDX: ffffffffffffffd5 RSI: 0000000000000004 RDI: ffffffffffffffd5
[  199.634702] RBP: ffff88000a507e18 R08: ffff88000a66a560 R09: 0000000000000000
[  199.636703] R10: 0000000000000001 R11: 0000000000000024 R12: ffffffffffffffd5
[  199.638744] R13: 0000000000000000 R14: ffff88000a526480 R15: ffff880067ae5528
[  199.640777] FS:  0000000000000000(0000) GS:ffff88011fa00000(0000) knlGS:0000000000000000
[  199.642745] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  199.644650] CR2: ffffffffffffffd5 CR3: 0000000001c0d000 CR4: 00000000000407f0
[  199.646599] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  199.648559] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  199.650483] Stack:
[  199.652388]  ffff88000a507e28 ffffffff816c067e ffff88000a507ea8 ffffffff812bb9b5
[  199.654328]  ffff88000a526480 ffff8800118bd880 ffff880067ae5520 ffff880067ae5524
[  199.656264]  ffff8800118bd880 ffff8800118bd880 ffff88000a507ea8 ffff880081cd8540
[  199.658207] Call Trace:
[  199.660089]  [<ffffffff816c067e>] _raw_spin_lock+0xe/0x20
[  199.661991]  [<ffffffff812bb9b5>] exit_sem+0xb5/0x310
[  199.663867]  [<ffffffff8105df2a>] do_exit+0x2aa/0xa80
[  199.665761]  [<ffffffff8115cfc0>] ? do_munmap+0x270/0x3e0
[  199.667635]  [<ffffffff8105e794>] do_group_exit+0x44/0xa0
[  199.669466]  [<ffffffff8105e807>] SyS_exit_group+0x17/0x20
[  199.671307]  [<ffffffff816c935d>] system_call_fastpath+0x1a/0x1f
[  199.673189] Code: 00 00 48 c7 c1 61 39 04 81 48 c7 c2 5e 39 04 81 e9 dd fe ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 b8 00 00 01 00 48 89 e5 <f0> 0f c1 07 89 c2 c1 ea 10 66 39 c2 74 13 66 0f 1f 84 00 00 00 
[  199.677366] RIP  [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  199.679415]  RSP <ffff88000a507e18>
[  199.681449] CR2: ffffffffffffffd5
[  199.692918] ---[ end trace 418ce9dde3fe50d3 ]---
[  199.692925] BUG: unable to handle kernel paging request at ffffffffffffffd5
[  199.692933] IP: [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  199.692936] PGD 1c10067 PUD 1c12067 PMD 0 
[  199.692938] Oops: 0002 [#2] SMP 
[  199.692981] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek coretemp kvm_intel arc4 kvm snd_hda_intel iwldvm snd_hda_codec ghash_clmulni_intel snd_hwdep aesni_intel mac80211 snd_pcm i915 aes_x86_64 glue_helper snd_page_alloc uvcvideo lrw snd_seq_midi joydev gf128mul snd_seq_midi_event ablk_helper iwlwifi snd_rawmidi cryptd videobuf2_vmalloc i2c_algo_bit snd_seq parport_pc videobuf2_memops rfcomm bnep btusb drm_kms_helper snd_timer ppdev videobuf2_core psmouse drm snd_seq_device bluetooth videodev microcode cfg80211 snd serio_raw soundcore samsung_laptop wmi mac_hid lp video lpc_ich parport hid_generic r8169 usbhid hid
[  199.692985] CPU: 3 PID: 6170 Comm: cc1 Tainted: G      D      3.9.0-rc7-next20130419-9-iniza-small #1
[  199.692986] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[  199.692988] task: ffff88000a05c2c0 ti: ffff880011946000 task.ti: ffff880011946000
[  199.692992] RIP: 0010:[<ffffffff81043b59>]  [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  199.692994] RSP: 0018:ffff880011947e18  EFLAGS: 00010292
[  199.692995] RAX: 0000000000010000 RBX: ffff88000a05c2c0 RCX: 00000000ffffffff
[  199.692996] RDX: ffffffffffffffd5 RSI: 0000000000000004 RDI: ffffffffffffffd5
[  199.692997] RBP: ffff880011947e18 R08: ffff88000a5b7b10 R09: 0000000000000000
[  199.692998] R10: 0000000000000001 R11: ffff88011989fa00 R12: ffffffffffffffd5
[  199.692999] R13: 0000000000000000 R14: ffff88000a05c2c0 R15: ffff88000a7535a8
[  199.693001] FS:  0000000000000000(0000) GS:ffff88011fac0000(0000) knlGS:0000000000000000
[  199.693002] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  199.693003] CR2: ffffffffffffffd5 CR3: 0000000001c0d000 CR4: 00000000000407e0
[  199.693004] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  199.693005] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  199.693006] Stack:
[  199.693009]  ffff880011947e28 ffffffff816c067e ffff880011947ea8 ffffffff812bb9b5
[  199.693012]  ffff88000a05c2c0 ffff880029739440 ffff88000a7535a0 ffff88000a7535a4
[  199.693014]  ffff880029739440 ffff880029739440 ffff880011947ea8 ffff8800679267c0
[  199.693015] Call Trace:
[  199.693023]  [<ffffffff816c067e>] _raw_spin_lock+0xe/0x20
[  199.693027]  [<ffffffff812bb9b5>] exit_sem+0xb5/0x310
[  199.693031]  [<ffffffff8105df2a>] do_exit+0x2aa/0xa80
[  199.693034]  [<ffffffff8105e794>] do_group_exit+0x44/0xa0
[  199.693037]  [<ffffffff8105e807>] SyS_exit_group+0x17/0x20
[  199.693041]  [<ffffffff816c935d>] system_call_fastpath+0x1a/0x1f
[  199.693064] Code: 00 00 48 c7 c1 61 39 04 81 48 c7 c2 5e 39 04 81 e9 dd fe ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 b8 00 00 01 00 48 89 e5 <f0> 0f c1 07 89 c2 c1 ea 10 66 39 c2 74 13 66 0f 1f 84 00 00 00 
[  199.693069] RIP  [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  199.693069]  RSP <ffff880011947e18>
[  199.693070] CR2: ffffffffffffffd5
[  199.693072] ---[ end trace 418ce9dde3fe50d4 ]---
[  199.693073] Fixing recursive fault but reboot is needed!
[  199.693221] Fixing recursive fault but reboot is needed!
[  199.865739] BUG: unable to handle kernel paging request at ffffffffffffffd5
[  199.867230] IP: [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  199.868719] PGD 1c10067 PUD 1c12067 PMD 0 
[  199.870184] Oops: 0002 [#3] SMP 
[  199.871821] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek coretemp kvm_intel arc4 kvm snd_hda_intel iwldvm snd_hda_codec ghash_clmulni_intel snd_hwdep aesni_intel mac80211 snd_pcm i915 aes_x86_64 glue_helper snd_page_alloc uvcvideo lrw snd_seq_midi joydev gf128mul snd_seq_midi_event ablk_helper iwlwifi snd_rawmidi cryptd videobuf2_vmalloc i2c_algo_bit snd_seq parport_pc videobuf2_memops rfcomm bnep btusb drm_kms_helper snd_timer ppdev videobuf2_core psmouse drm snd_seq_device bluetooth videodev microcode cfg80211 snd serio_raw soundcore samsung_laptop wmi mac_hid lp video lpc_ich parport hid_generic r8169 usbhid hid
[  199.878406] CPU: 3 PID: 4854 Comm: bash Tainted: G      D      3.9.0-rc7-next20130419-9-iniza-small #1
[  199.880026] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[  199.881695] task: ffff880027fd66c0 ti: ffff88000a640000 task.ti: ffff88000a640000
[  199.883354] RIP: 0010:[<ffffffff81043b59>]  [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  199.884973] RSP: 0018:ffff88000a641e18  EFLAGS: 00010292
[  199.886519] RAX: 0000000000010000 RBX: ffff880027fd66c0 RCX: 00000000ffffffff
[  199.888043] RDX: ffffffffffffffd5 RSI: 0000000000000004 RDI: ffffffffffffffd5
[  199.889555] RBP: ffff88000a641e18 R08: ffff88000a5532f0 R09: 0000000000000000
[  199.891022] R10: 0000000000000001 R11: ffff88011989fa00 R12: ffffffffffffffd5
[  199.892541] R13: 0000000000000000 R14: ffff880027fd66c0 R15: ffff88000a5b69c8
[  199.893961] FS:  0000000000000000(0000) GS:ffff88011fac0000(0000) knlGS:0000000000000000
[  199.895397] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  199.896831] CR2: ffffffffffffffd5 CR3: 0000000001c0d000 CR4: 00000000000407e0
[  199.898264] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  199.899697] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  199.901124] Stack:
[  199.902527]  ffff88000a641e28 ffffffff816c067e ffff88000a641ea8 ffffffff812bb9b5
[  199.903959]  ffff880027fd66c0 ffff880091ae0500 ffff88000a5b69c0 ffff88000a5b69c4
[  199.905390]  ffff880091ae0500 ffff880091ae0500 ffff88000a641ea8 ffff880033b95140
[  199.906822] Call Trace:
[  199.908237]  [<ffffffff816c067e>] _raw_spin_lock+0xe/0x20
[  199.909666]  [<ffffffff812bb9b5>] exit_sem+0xb5/0x310
[  199.911071]  [<ffffffff8105df2a>] do_exit+0x2aa/0xa80
[  199.912566]  [<ffffffff8105e794>] do_group_exit+0x44/0xa0
[  199.913948]  [<ffffffff8105e807>] SyS_exit_group+0x17/0x20
[  199.915326]  [<ffffffff816c935d>] system_call_fastpath+0x1a/0x1f
[  199.916696] Code: 00 00 48 c7 c1 61 39 04 81 48 c7 c2 5e 39 04 81 e9 dd fe ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 b8 00 00 01 00 48 89 e5 <f0> 0f c1 07 89 c2 c1 ea 10 66 39 c2 74 13 66 0f 1f 84 00 00 00 
[  199.919755] RIP  [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  199.921274]  RSP <ffff88000a641e18>
[  199.922769] CR2: ffffffffffffffd5
[  199.924274] ---[ end trace 418ce9dde3fe50d5 ]---
[  199.924277] Fixing recursive fault but reboot is needed!
[  199.948627] BUG: unable to handle kernel paging request at ffffffffffffffd5
[  199.950167] IP: [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  199.951741] PGD 1c10067 PUD 1c12067 PMD 0 
[  199.953242] Oops: 0002 [#4] SMP 
[  199.954629] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek coretemp kvm_intel arc4 kvm snd_hda_intel iwldvm snd_hda_codec ghash_clmulni_intel snd_hwdep aesni_intel mac80211 snd_pcm i915 aes_x86_64 glue_helper snd_page_alloc uvcvideo lrw snd_seq_midi joydev gf128mul snd_seq_midi_event ablk_helper iwlwifi snd_rawmidi cryptd videobuf2_vmalloc i2c_algo_bit snd_seq parport_pc videobuf2_memops rfcomm bnep btusb drm_kms_helper snd_timer ppdev videobuf2_core psmouse drm snd_seq_device bluetooth videodev microcode cfg80211 snd serio_raw soundcore samsung_laptop wmi mac_hid lp video lpc_ich parport hid_generic r8169 usbhid hid
[  199.960833] CPU: 1 PID: 5753 Comm: cc1 Tainted: G      D      3.9.0-rc7-next20130419-9-iniza-small #1
[  199.962405] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[  199.964001] task: ffff88000a6d6840 ti: ffff88000a1d6000 task.ti: ffff88000a1d6000
[  199.965610] RIP: 0010:[<ffffffff81043b59>]  [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  199.967238] RSP: 0018:ffff88000a1d7e18  EFLAGS: 00010292
[  199.968767] RAX: 0000000000010000 RBX: ffff88000a6d6840 RCX: 00000000ffffffff
[  199.970132] RDX: ffffffffffffffd5 RSI: 0000000000000004 RDI: ffffffffffffffd5
[  199.971471] RBP: ffff88000a1d7e18 R08: ffff88000a0833c0 R09: 0000000000000000
[  199.972824] R10: 0000000000000001 R11: ffff880119ed1200 R12: ffffffffffffffd5
[  199.974137] R13: 0000000000000000 R14: ffff88000a6d6840 R15: ffff88000a5b6a48
[  199.975397] FS:  0000000000000000(0000) GS:ffff88011fa40000(0000) knlGS:0000000000000000
[  199.976682] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  199.977956] CR2: ffffffffffffffd5 CR3: 0000000001c0d000 CR4: 00000000000407e0
[  199.979195] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  199.980471] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  199.981713] Stack:
[  199.982934]  ffff88000a1d7e28 ffffffff816c067e ffff88000a1d7ea8 ffffffff812bb9b5
[  199.984203]  ffff88000a6d6840 ffff8800118b8b80 ffff88000a5b6a40 ffff88000a5b6a44
[  199.985473]  ffff8800118b8b80 ffff8800118b8b80 ffff88000a1d7ea8 ffff8800590bdbc0
[  199.986714] Call Trace:
[  199.987937]  [<ffffffff816c067e>] _raw_spin_lock+0xe/0x20
[  199.989197]  [<ffffffff812bb9b5>] exit_sem+0xb5/0x310
[  199.990410]  [<ffffffff8105df2a>] do_exit+0x2aa/0xa80
[  199.991623]  [<ffffffff8115cfc0>] ? do_munmap+0x270/0x3e0
[  199.992875]  [<ffffffff8105e794>] do_group_exit+0x44/0xa0
[  199.994106]  [<ffffffff8105e807>] SyS_exit_group+0x17/0x20
[  199.995290]  [<ffffffff816c935d>] system_call_fastpath+0x1a/0x1f
[  199.996512] Code: 00 00 48 c7 c1 61 39 04 81 48 c7 c2 5e 39 04 81 e9 dd fe ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 b8 00 00 01 00 48 89 e5 <f0> 0f c1 07 89 c2 c1 ea 10 66 39 c2 74 13 66 0f 1f 84 00 00 00 
[  199.999172] RIP  [<ffffffff81043b59>] __ticket_spin_lock+0x9/0x30
[  200.000515]  RSP <ffff88000a1d7e18>
[  200.001884] CR2: ffffffffffffffd5
[  200.003188] ---[ end trace 418ce9dde3fe50d6 ]---
[  200.003190] Fixing recursive fault but reboot is needed!

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
  2013-04-19 22:34                       ` Sedat Dilek
@ 2013-04-19 22:50                         ` Linus Torvalds
  2013-04-19 22:55                           ` Sedat Dilek
  0 siblings, 1 reply; 21+ messages in thread
From: Linus Torvalds @ 2013-04-19 22:50 UTC (permalink / raw)
  To: Sedat Dilek
  Cc: Davidlohr Bueso, Rik van Riel, Daniel Vetter, Stephen Rothwell,
	linux-next, Linux Kernel Mailing List, the arch/x86 maintainers,
	Ingo Molnar, Thomas Gleixner, Paul McKenney, Paul McKenney, DRI,
	Dave Airlie, Emmanuel Benisty

On Fri, Apr 19, 2013 at 3:34 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>
> See attached dmesg.

This still has the bug Davidlohr pointed at:

>> This looks like what Emmanuel was/is running into:
>> https://lkml.org/lkml/2013/3/30/1

you need to move the "IS_ERR()" check before the sem_lock.

              Linus

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
  2013-04-19 22:50                         ` Linus Torvalds
@ 2013-04-19 22:55                           ` Sedat Dilek
  2013-04-19 23:02                             ` Linus Torvalds
  0 siblings, 1 reply; 21+ messages in thread
From: Sedat Dilek @ 2013-04-19 22:55 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Davidlohr Bueso, Rik van Riel, Daniel Vetter, Stephen Rothwell,
	linux-next, Linux Kernel Mailing List, the arch/x86 maintainers,
	Ingo Molnar, Thomas Gleixner, Paul McKenney, Paul McKenney, DRI,
	Dave Airlie, Emmanuel Benisty

On Sat, Apr 20, 2013 at 12:50 AM, Linus Torvalds
<torvalds@linux-foundation.org> wrote:
> On Fri, Apr 19, 2013 at 3:34 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>>
>> See attached dmesg.
>
> This still has the bug Davidlohr pointed at:
>
>>> This looks like what Emmanuel was/is running into:
>>> https://lkml.org/lkml/2013/3/30/1
>
> you need to move the "IS_ERR()" check before the sem_lock.
>

Davidlohr pointed to this patch (tested the triplet):

ipc, sem: do not call sem_lock when bogus sma:
https://lkml.org/lkml/2013/3/31/12

Is that what you mean?

- Sedat -

>               Linus

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
  2013-04-19 22:55                           ` Sedat Dilek
@ 2013-04-19 23:02                             ` Linus Torvalds
  2013-04-20  0:06                               ` Sedat Dilek
  0 siblings, 1 reply; 21+ messages in thread
From: Linus Torvalds @ 2013-04-19 23:02 UTC (permalink / raw)
  To: Sedat Dilek
  Cc: Stephen Rothwell, Rik van Riel, Daniel Vetter, Davidlohr Bueso,
	the arch/x86 maintainers, Linux Kernel Mailing List, DRI,
	Emmanuel Benisty, Paul McKenney, linux-next, Dave Airlie,
	Thomas Gleixner, Paul McKenney, Ingo Molnar

On Fri, Apr 19, 2013 at 3:55 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>
> Davidlohr pointed to this patch (tested the triplet):
>
> ipc, sem: do not call sem_lock when bogus sma:
> https://lkml.org/lkml/2013/3/31/12
>
> Is that what you mean?

Yup.

    Linus

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
  2013-04-19 23:02                             ` Linus Torvalds
@ 2013-04-20  0:06                               ` Sedat Dilek
  2013-04-20  0:19                                 ` Sedat Dilek
  0 siblings, 1 reply; 21+ messages in thread
From: Sedat Dilek @ 2013-04-20  0:06 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Davidlohr Bueso, Rik van Riel, Daniel Vetter, Stephen Rothwell,
	linux-next, Linux Kernel Mailing List, the arch/x86 maintainers,
	Ingo Molnar, Thomas Gleixner, Paul McKenney, Paul McKenney, DRI,
	Dave Airlie, Emmanuel Benisty

[-- Attachment #1: Type: text/plain, Size: 662 bytes --]

On Sat, Apr 20, 2013 at 1:02 AM, Linus Torvalds
<torvalds@linux-foundation.org> wrote:
> On Fri, Apr 19, 2013 at 3:55 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>>
>> Davidlohr pointed to this patch (tested the triplet):
>>
>> ipc, sem: do not call sem_lock when bogus sma:
>> https://lkml.org/lkml/2013/3/31/12
>>
>> Is that what you mean?
>
> Yup.
>

Davidlohr Bueso (1):
      ipc, sem: do not call sem_lock when bogus sma

Linus Torvalds (1):
      crazy rcu double free debug hack

With ***both*** patches applied I am able to build a Linux-kernel with
4 parallel-make-jobs again.
David's or your patch alone are not sufficient!

- Sedat -

>     Linus

[-- Attachment #2: dmesg_3.9.0-rc7-next20130419-12-iniza-small.txt --]
[-- Type: text/plain, Size: 53717 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.9.0-rc7-next20130419-12-iniza-small (sedat.dilek@gmail.com@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Sat Apr 20 01:44:21 CEST 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc7-next20130419-12-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask FE0000000 write-back
[    0.000000]   6 base 11FE00000 mask FFFE00000 uncachable
[    0.000000]   7 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x0202c000, 0x0202cfff] PGTABLE
[    0.000000] BRK [0x0202d000, 0x0202dfff] PGTABLE
[    0.000000] BRK [0x0202e000, 0x0202efff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff]
[    0.000000]  [mem 0x11fc00000-0x11fdfffff] page 2M
[    0.000000] BRK [0x0202f000, 0x0202ffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff]
[    0.000000]  [mem 0x11c000000-0x11fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff]
[    0.000000]  [mem 0x40200000-0xd9bfffff] page 2M
[    0.000000]  [mem 0xd9c00000-0xd9c9efff] page 4k
[    0.000000] BRK [0x02030000, 0x02030fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[    0.000000]  [mem 0xdafff000-0xdaffffff] page 4k
[    0.000000] RAMDISK: [mem 0x379ae000-0x37ccefff]
[    0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[    0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD  SNB-CPT 00000000 INTL 20061109)
[    0.000000] ACPI: FACS 00000000daf47000 00040
[    0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[    0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000dafea000 00996 (v01  PmRef    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL      COMBUF 00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01   Iffs  IffsAsl 00003000 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff]
[    0.000000]   NODE_DATA [mem 0x11fdf7000-0x11fdfbfff]
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x11fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xd9c9efff]
[    0.000000]   node   0: [mem 0xdafff000-0xdaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x11fdfffff]
[    0.000000] On node 0 totalpages: 1021500
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12127 pages used for memmap
[    0.000000]   DMA32 zone: 886944 pages, LIFO batch:31
[    0.000000]   Normal zone: 1785 pages used for memmap
[    0.000000]   Normal zone: 130560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000
[    0.000000] PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000
[    0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
[    0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
[    0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[    0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[    0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[    0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s86208 r8192 d24384 u262144
[    0.000000] pcpu-alloc: s86208 r8192 d24384 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1007376
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc7-next20130419-12-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3938740k/4716544k available (6984k kernel code, 630544k absent, 147260k reserved, 6317k data, 1312k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] ODEBUG: 0 of 0 active objects replaced
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1596.354 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.70 BogoMIPS (lpj=6385416)
[    0.000009] pid_max: default: 32768 minimum: 301
[    0.000140] Security Framework initialized
[    0.000152] AppArmor: AppArmor initialized
[    0.000155] Yama: becoming mindful.
[    0.000540] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001603] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002070] Mount-cache hash table entries: 256
[    0.002588] Initializing cgroup subsys memory
[    0.002659] Initializing cgroup subsys devices
[    0.002663] Initializing cgroup subsys freezer
[    0.002666] Initializing cgroup subsys blkio
[    0.002670] Initializing cgroup subsys perf_event
[    0.002674] Initializing cgroup subsys hugetlb
[    0.002758] Disabled fast string operations
[    0.002762] CPU: Physical Processor ID: 0
[    0.002765] CPU: Processor Core ID: 0
[    0.002771] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.002771] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002778] mce: CPU supports 7 MCE banks
[    0.002795] CPU0: Thermal monitoring enabled (TM1)
[    0.002806] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.002806] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.002806] tlb_flushall_shift: 5
[    0.002899] Freeing SMP alternatives: 24k freed
[    0.003869] ACPI: Core revision 20130328
[    0.014667] ACPI: All ACPI Tables successfully acquired
[    0.016170] ftrace: allocating 26388 entries in 104 pages
[    0.031013] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.070674] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
[    0.070686] TSC deadline timer enabled
[    0.070699] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[    0.070712] ... version:                3
[    0.070714] ... bit width:              48
[    0.070716] ... generic registers:      4
[    0.070719] ... value mask:             0000ffffffffffff
[    0.070721] ... max period:             000000007fffffff
[    0.070724] ... fixed-purpose events:   3
[    0.070726] ... event mask:             000000070000000f
[    0.083746] Disabled fast string operations
[    0.086926] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.098467] Disabled fast string operations
[    0.112124] Disabled fast string operations
[    0.072709] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.114254] Brought up 4 CPUs
[    0.114263] smpboot: Total of 4 processors activated (12770.83 BogoMIPS)
[    0.118297] devtmpfs: initialized
[    0.120284] EVM: security.selinux
[    0.120287] EVM: security.SMACK64
[    0.120289] EVM: security.capability
[    0.120376] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
[    0.121861] regulator-dummy: no parameters
[    0.122015] NET: Registered protocol family 16
[    0.122362] ACPI: bus type PCI registered
[    0.122478] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.122484] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.129311] PCI: Using configuration type 1 for base access
[    0.132603] bio: create slab <bio-0> at 0
[    0.133004] ACPI: Added _OSI(Module Device)
[    0.133008] ACPI: Added _OSI(Processor Device)
[    0.133012] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.133015] ACPI: Added _OSI(Processor Aggregator Device)
[    0.134775] ACPI: EC: Look up EC in DSDT
[    0.158327] ACPI: Executed 1 blocks of module-level executable AML code
[    0.164272] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.175755] ACPI: SSDT 00000000dae70718 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.176260] ACPI: Dynamic OEM Table Load:
[    0.176264] ACPI: SSDT           (null) 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.186748] ACPI: SSDT 00000000dae71a98 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.187332] ACPI: Dynamic OEM Table Load:
[    0.187336] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.198437] ACPI: SSDT 00000000dae6fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.198915] ACPI: Dynamic OEM Table Load:
[    0.198919] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.212643] ACPI: Interpreter enabled
[    0.212660] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[    0.212684] ACPI: (supports S0 S1 S3 S4 S5)
[    0.212687] ACPI: Using IOAPIC for interrupt routing
[    0.212744] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.236635] ACPI: Power Resource [FN00] (off)
[    0.236821] ACPI: Power Resource [FN01] (off)
[    0.237004] ACPI: Power Resource [FN02] (off)
[    0.237185] ACPI: Power Resource [FN03] (off)
[    0.237371] ACPI: Power Resource [FN04] (off)
[    0.238470] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.238814] \_SB_.PCI0:_OSC invalid UUID
[    0.238815] _OSC request data:1 8 0 
[    0.239809] PCI host bridge to bus 0000:00
[    0.239815] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.239819] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.239822] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.239826] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.239830] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[    0.239834] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.239852] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.240012] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.240025] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.240032] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.240038] pci 0000:00:02.0: reg 20: [io  0x3000-0x303f]
[    0.240231] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.240257] pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit]
[    0.240342] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.240507] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.240531] pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff]
[    0.240632] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.240738] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.240758] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit]
[    0.240837] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.240882] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.240951] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.241042] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.241091] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.241163] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.241252] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.241310] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.241383] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.241514] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.241648] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.241672] pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff]
[    0.241773] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.241877] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.242077] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.242099] pci 0000:00:1f.2: reg 10: [io  0x3088-0x308f]
[    0.242109] pci 0000:00:1f.2: reg 14: [io  0x3094-0x3097]
[    0.242119] pci 0000:00:1f.2: reg 18: [io  0x3080-0x3087]
[    0.242129] pci 0000:00:1f.2: reg 1c: [io  0x3090-0x3093]
[    0.242139] pci 0000:00:1f.2: reg 20: [io  0x3060-0x307f]
[    0.242149] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff]
[    0.242202] pci 0000:00:1f.2: PME# supported from D3hot
[    0.242325] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.242343] pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit]
[    0.242368] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
[    0.242743] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
[    0.242939] pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit]
[    0.243672] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.243841] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.250410] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.250419] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.250591] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.250656] pci 0000:02:00.0: reg 10: [io  0x2000-0x20ff]
[    0.250779] pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref]
[    0.250855] pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]
[    0.251188] pci 0000:02:00.0: supports D1 D2
[    0.251190] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.251317] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.258341] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.258356] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.258378] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.258578] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.258615] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit]
[    0.258814] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.266337] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.266357] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.266556] \_SB_.PCI0:_OSC invalid UUID
[    0.266557] _OSC request data:1 1f 0 
[    0.266562] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.266567] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.267456] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.267579] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.267697] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.267812] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.267927] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.268043] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.268160] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.268274] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.268897] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.268907] acpi root: \_SB_.PCI0 notify handler is installed
[    0.268968] Found 1 acpi root devices
[    0.269034] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.269241] ACPI: No dock devices found.
[    0.269446] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.269453] vgaarb: loaded
[    0.269455] vgaarb: bridge control possible 0000:00:02.0
[    0.270130] SCSI subsystem initialized
[    0.270134] ACPI: bus type ATA registered
[    0.270247] libata version 3.00 loaded.
[    0.270312] ACPI: bus type USB registered
[    0.270362] usbcore: registered new interface driver usbfs
[    0.270388] usbcore: registered new interface driver hub
[    0.270443] usbcore: registered new device driver usb
[    0.270761] PCI: Using ACPI for IRQ routing
[    0.272430] PCI: pci_cache_line_size set to 64 bytes
[    0.272540] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.272543] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
[    0.272545] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.272547] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[    0.272822] NetLabel: Initializing
[    0.272825] NetLabel:  domain hash size = 128
[    0.272827] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.272876] NetLabel:  unlabeled traffic allowed by default
[    0.272960] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.272970] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.274985] Switching to clocksource hpet
[    0.292254] AppArmor: AppArmor Filesystem Enabled
[    0.292313] pnp: PnP ACPI init
[    0.292332] ACPI: bus type PNP registered
[    0.292696] pnp 00:00: [dma 4]
[    0.292739] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.292782] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.292953] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.293007] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.293084] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.293089] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.293093] system 00:04: [io  0x5000-0x5003] has been reserved
[    0.293097] system 00:04: [io  0xffff] has been reserved
[    0.293101] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.293105] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.293109] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.293113] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.293117] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.293122] system 00:04: [io  0x5000-0x500f] could not be reserved
[    0.293127] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.293173] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.293267] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.293272] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.293331] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.293421] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[    0.293735] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.293740] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.293745] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.293749] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.293753] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.293757] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.293761] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.293765] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.293770] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.293774] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.293779] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.294441] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.294479] pnp: PnP ACPI: found 11 devices
[    0.294482] ACPI: bus type PNP unregistered
[    0.302043] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.302053] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.302066] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.302071] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.302082] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.302092] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.302099] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.302540] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.302542] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.302544] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.302546] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[    0.302548] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.302550] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[    0.302552] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.302554] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.302557] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.302674] NET: Registered protocol family 2
[    0.303029] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.303214] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.303493] TCP: Hash tables configured (established 32768 bind 32768)
[    0.303753] TCP: reno registered
[    0.303773] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    0.303840] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    0.304084] NET: Registered protocol family 1
[    0.304106] pci 0000:00:02.0: Boot video device
[    0.304878] PCI: CLS 64 bytes, default 64
[    0.305089] Trying to unpack rootfs image as initramfs...
[    0.376591] Freeing initrd memory: 3204k freed
[    0.377274] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.377284] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff]
[    0.377620] Scanning for low memory corruption every 60 seconds
[    0.377991] Initialise module verification
[    0.378052] audit: initializing netlink socket (disabled)
[    0.378072] type=2000 audit(1366422452.372:1): initialized
[    0.408317] bounce pool size: 64 pages
[    0.408344] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.408951] VFS: Disk quotas dquot_6.5.2
[    0.408994] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.409725] fuse init (API version 7.21)
[    0.409819] msgmni has been set to 7699
[    0.410365] Key type asymmetric registered
[    0.410369] Asymmetric key parser 'x509' registered
[    0.410415] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.410470] io scheduler noop registered
[    0.410474] io scheduler deadline registered (default)
[    0.410507] io scheduler cfq registered
[    0.410914] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.410959] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.411053] intel_idle: MWAIT substates: 0x21120
[    0.411055] intel_idle: v0.4 model 0x2A
[    0.411056] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.411498] ACPI: AC Adapter [ADP1] (on-line)
[    0.411888] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.411913] ACPI: Lid Switch [LID0]
[    0.411982] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.411990] ACPI: Power Button [PWRB]
[    0.412053] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.412058] ACPI: Power Button [PWRF]
[    0.412159] ACPI: Fan [FAN0] (off)
[    0.412213] ACPI: Fan [FAN1] (off)
[    0.412266] ACPI: Fan [FAN2] (off)
[    0.412319] ACPI: Fan [FAN3] (off)
[    0.412373] ACPI: Fan [FAN4] (off)
[    0.412469] ACPI: Requesting acpi_cpufreq
[    0.419694] thermal LNXTHERM:00: registered as thermal_zone0
[    0.419699] ACPI: Thermal Zone [TZ00] (68 C)
[    0.420127] thermal LNXTHERM:01: registered as thermal_zone1
[    0.420131] ACPI: Thermal Zone [TZ01] (30 C)
[    0.420198] GHES: HEST is not enabled!
[    0.420408] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.425470] ACPI: Battery Slot [BAT1] (battery present)
[    0.425491] Linux agpgart interface v0.103
[    0.427937] brd: module loaded
[    0.429165] loop: module loaded
[    0.429387] mei_me 0000:00:16.0: setting latency timer to 64
[    0.429456] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[    0.432562] ahci 0000:00:1f.2: version 3.0
[    0.432750] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    0.432957] ahci: SSS flag set, parallel bus scan disabled
[    0.446909] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[    0.446915] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    0.446924] ahci 0000:00:1f.2: setting latency timer to 64
[    0.471690] scsi0 : ahci
[    0.471850] scsi1 : ahci
[    0.471962] scsi2 : ahci
[    0.472074] scsi3 : ahci
[    0.472186] scsi4 : ahci
[    0.472331] scsi5 : ahci
[    0.472405] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41
[    0.472411] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41
[    0.472414] ata3: DUMMY
[    0.472418] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41
[    0.472423] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41
[    0.472426] ata6: DUMMY
[    0.473333] libphy: Fixed MDIO Bus: probed
[    0.473599] tun: Universal TUN/TAP device driver, 1.6
[    0.473602] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.473678] PPP generic driver version 2.4.2
[    0.473785] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.473789] ehci-pci: EHCI PCI platform driver
[    0.473970] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.473979] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.473989] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.474010] ehci-pci 0000:00:1a.0: debug port 2
[    0.477946] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.477992] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000
[    0.486861] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.486907] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.486911] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.486915] usb usb1: Product: EHCI Host Controller
[    0.486919] usb usb1: Manufacturer: Linux 3.9.0-rc7-next20130419-12-iniza-small ehci_hcd
[    0.486923] usb usb1: SerialNumber: 0000:00:1a.0
[    0.487080] hub 1-0:1.0: USB hub found
[    0.487089] hub 1-0:1.0: 2 ports detected
[    0.487371] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.487379] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.487390] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.487409] ehci-pci 0000:00:1d.0: debug port 2
[    0.491332] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.491377] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000
[    0.502849] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.502887] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.502891] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.502895] usb usb2: Product: EHCI Host Controller
[    0.502898] usb usb2: Manufacturer: Linux 3.9.0-rc7-next20130419-12-iniza-small ehci_hcd
[    0.502902] usb usb2: SerialNumber: 0000:00:1d.0
[    0.503047] hub 2-0:1.0: USB hub found
[    0.503055] hub 2-0:1.0: 2 ports detected
[    0.503183] ehci-platform: EHCI generic platform driver
[    0.503204] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.503240] uhci_hcd: USB Universal Host Controller Interface driver
[    0.503371] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.503382] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    0.513159] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.513167] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[    0.513174] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[    0.513181] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[    0.513188] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[    0.513472] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.513476] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.513480] usb usb3: Product: xHCI Host Controller
[    0.513483] usb usb3: Manufacturer: Linux 3.9.0-rc7-next20130419-12-iniza-small xhci_hcd
[    0.513488] usb usb3: SerialNumber: 0000:03:00.0
[    0.513594] xHCI xhci_add_endpoint called for root hub
[    0.513595] xHCI xhci_check_bandwidth called for root hub
[    0.513630] hub 3-0:1.0: USB hub found
[    0.513642] hub 3-0:1.0: 2 ports detected
[    0.513753] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.513760] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    0.513818] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.513822] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.513826] usb usb4: Product: xHCI Host Controller
[    0.513829] usb usb4: Manufacturer: Linux 3.9.0-rc7-next20130419-12-iniza-small xhci_hcd
[    0.513833] usb usb4: SerialNumber: 0000:03:00.0
[    0.513932] xHCI xhci_add_endpoint called for root hub
[    0.513933] xHCI xhci_check_bandwidth called for root hub
[    0.513968] hub 4-0:1.0: USB hub found
[    0.513983] hub 4-0:1.0: 2 ports detected
[    0.530909] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[    0.538008] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.538017] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.538220] mousedev: PS/2 mouse device common for all mice
[    0.538657] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.538694] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.538755] device-mapper: uevent: version 1.0.3
[    0.538841] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    0.539037] cpuidle: using governor ladder
[    0.539047] ledtrig-cpu: registered to indicate activity on CPUs
[    0.539050] EFI Variables Facility v0.08 2004-May-17
[    0.539290] ashmem: initialized
[    0.539439] TCP: cubic registered
[    0.539532] NET: Registered protocol family 10
[    0.539950] NET: Registered protocol family 17
[    0.539969] Key type dns_resolver registered
[    0.540375] PM: Hibernation image not present or could not be loaded.
[    0.540376] Loading module verification certificates
[    0.541479] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 381be3313c230c25c9d3034dfe3c1c9499d91901'
[    0.541511] registered taskstats version 1
[    0.544773] Key type trusted registered
[    0.547351] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.547985] Key type encrypted registered
[    0.575640] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.575646] EDD information not available.
[    0.790754] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.791961] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[    0.791981] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.793010] ata1.00: configured for UDMA/133
[    0.793306] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[    0.793567] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.793573] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.793645] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.793681] sd 0:0:0:0: [sda] Write Protect is off
[    0.793686] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.793730] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.798722] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.801438]  sda: sda1 sda2 sda3
[    0.802478] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.931035] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    0.931064] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.931497] hub 1-1:1.0: USB hub found
[    0.931647] hub 1-1:1.0: 6 ports detected
[    1.042583] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.114524] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.115089] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133
[    1.115107] ata2.00: 31277232 sectors, multi 1: LBA48 
[    1.115813] ata2.00: configured for UDMA/133
[    1.116096] scsi 1:0:0:0: Direct-Access     ATA      SanDisk iSSD P4  SSD  PQ: 0 ANSI: 5
[    1.116337] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    1.116361] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.116493] sd 1:0:0:0: [sdb] Write Protect is off
[    1.116498] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.116591] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.117651]  sdb: sdb1 sdb2
[    1.118119] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.175120] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.175139] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.175526] hub 2-1:1.0: USB hub found
[    1.175681] hub 2-1:1.0: 6 ports detected
[    1.250557] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.348704] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e
[    1.348723] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.348735] usb 1-1.2: Product: USB-PS/2 Optical Mouse
[    1.348743] usb 1-1.2: Manufacturer: Logitech
[    1.378250] tsc: Refined TSC clocksource calibration: 1596.374 MHz
[    1.378267] Switching to clocksource tsc
[    1.422438] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    1.434268] ata4: SATA link down (SStatus 0 SControl 300)
[    1.686526] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018
[    1.686547] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.686559] usb 1-1.4: Product: WebCam SC-13HDL11431N
[    1.686568] usb 1-1.4: Manufacturer: 123
[    1.754066] ata5: SATA link down (SStatus 0 SControl 300)
[    1.755181] Freeing unused kernel memory: 1312k freed
[    1.755397] Write protecting the kernel read-only data: 12288k
[    1.758447] Freeing unused kernel memory: 1196k freed
[    1.760977] Freeing unused kernel memory: 1056k freed
[    1.782163] udevd[120]: starting version 175
[    1.901461] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.901887] r8169 0000:02:00.0: irq 47 for MSI/MSI-X
[    1.902314] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47
[    1.902326] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.913952] hidraw: raw HID events driver (C) Jiri Kosina
[    1.921146] usbcore: registered new interface driver usbhid
[    1.921155] usbhid: USB HID core driver
[    1.930005] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[    1.966527] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[    1.966811] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[    2.026731] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
[    2.026740] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.763718] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[   24.156368] Adding 262140k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262140k FS
[   24.183192] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[   24.220695] udevd[590]: starting version 175
[   24.442179] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[   24.442190] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.442197] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   24.442203] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.442206] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   24.442210] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.442213] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   24.442217] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.442219] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   24.832887] samsung_laptop: detected SABI interface: SwSmi@
[   24.832891] samsung_laptop: Backlight controlled by ACPI video driver
[   24.834326] wmi: Mapper loaded
[   24.903484] lp: driver loaded but no devices found
[   25.130843] Bluetooth: Core ver 2.16
[   25.130896] NET: Registered protocol family 31
[   25.130899] Bluetooth: HCI device and connection manager initialized
[   25.131000] Bluetooth: HCI socket layer initialized
[   25.131028] Bluetooth: L2CAP socket layer initialized
[   25.131045] Bluetooth: SCO socket layer initialized
[   25.142571] cfg80211: Calling CRDA to update world regulatory domain
[   25.341025] Linux video capture interface: v2.00
[   25.414073] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[   25.560904] type=1400 audit(1366415277.569:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=798 comm="apparmor_parser"
[   25.560923] type=1400 audit(1366415277.569:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=720 comm="apparmor_parser"
[   25.561670] type=1400 audit(1366415277.573:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=720 comm="apparmor_parser"
[   25.561705] type=1400 audit(1366415277.573:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=798 comm="apparmor_parser"
[   25.562028] type=1400 audit(1366415277.573:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=720 comm="apparmor_parser"
[   25.562197] type=1400 audit(1366415277.573:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=798 comm="apparmor_parser"
[   25.606289] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[   25.607927] [drm] Initialized drm 1.1.0 20060810
[   25.611848] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[   25.612419] usbcore: registered new interface driver btusb
[   25.619108] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[   25.624566] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   25.638428] cfg80211: World regulatory domain updated:
[   25.638434] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   25.638438] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.638441] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.638443] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.638446] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.638448] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.654307] init: failsafe main process (927) killed by TERM signal
[   25.767809] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.767814] Bluetooth: BNEP filters: protocol multicast
[   25.767833] Bluetooth: BNEP socket layer initialized
[   25.768512] ppdev: user-space parallel port driver
[   25.957261] type=1400 audit(1366415277.969:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1059 comm="apparmor_parser"
[   25.957858] type=1400 audit(1366415277.969:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1059 comm="apparmor_parser"
[   25.958216] type=1400 audit(1366415277.969:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1059 comm="apparmor_parser"
[   25.995090] Bluetooth: RFCOMM TTY layer initialized
[   25.995109] Bluetooth: RFCOMM socket layer initialized
[   25.995111] Bluetooth: RFCOMM ver 1.11
[   26.032124] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[   26.032129] Copyright(c) 2003-2013 Intel Corporation
[   26.032676] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X
[   26.033814] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   26.139027] type=1400 audit(1366415278.149:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1058 comm="apparmor_parser"
[   26.230172] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[   26.245250] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[   26.322862] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[   26.545808] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[   26.565751] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6
[   26.565908] usbcore: registered new interface driver uvcvideo
[   26.565911] USB Video Class driver (1.1.1)
[   26.756905] [drm] Memory usable by graphics device = 2048M
[   26.756914] i915 0000:00:02.0: setting latency timer to 64
[   26.790006] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[   26.790019] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   26.790021] [drm] Driver supports precise vblank timestamp query.
[   26.790177] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   26.803795] [drm] Wrong MCH_SSKPD value: 0x16040307
[   26.803800] [drm] This can cause pipe underruns and display issues.
[   26.803802] [drm] Please upgrade your BIOS to fix this.
[   26.821958] fbcon: inteldrmfb (fb0) is primary device
[   26.826228] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled
[   26.826230] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   26.826232] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   26.826233] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[   26.826235] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
[   26.826237] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[   26.826290] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   26.879076] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   26.898376] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   26.905172] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   27.284928] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   27.291545] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   27.485955] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   27.867726] Console: switching to colour frame buffer device 170x48
[   27.870641] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   27.870645] i915 0000:00:02.0: registered panic notifier
[   27.890967] init: alsa-restore main process (1222) terminated with status 19
[   27.906779] acpi device:33: registered as cooling_device9
[   27.907264] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   27.907385] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   27.911419] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   27.912040] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[   28.000010] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   28.000232] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   28.000439] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   28.803058] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   33.723618] wlan0: authenticate with 00:04:0e:e4:00:3d
[   33.728183] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[   33.729958] wlan0: authenticated
[   33.730085] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   33.730090] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   33.731371] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[   33.735073] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[   33.740919] wlan0: associated
[   33.741010] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   41.729391] show_signal_msg: 45 callbacks suppressed
[   41.729398] firefox[2190]: segfault at 7f0e340b5768 ip 00007f0e34097362 sp 00007fff3c815998 error 7 in libGL.so.1.2.0[7f0e34097000+7b000]
[   88.253500] cpufreq_ondemand: od_init: tuners ffff880064842300
[  879.094697] type=1400 audit(1366416132.293:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1085 comm="cupsd" pid=1085 comm="cupsd" capability=36  capname="block_suspend"

[-- Attachment #3: 3.9.0-rc7-next20130419-12-iniza-small.patch --]
[-- Type: application/octet-stream, Size: 5290 bytes --]

Davidlohr Bueso (1):
      ipc, sem: do not call sem_lock when bogus sma

Linus Torvalds (1):
      crazy rcu double free debug hack

Sedat Dilek (7):
      kbuild: deb-pkg: Try to determine distribution
      kbuild: deb-pkg: Bump year in debian/copyright file
      kbuild: deb-pkg: Update git repository URL in debian/copyright file
      Merge tag 'next-20130419' of git://git.kernel.org/.../next/linux-next into Linux-Next-v20130419
      Merge branch 'deb-pkg-fixes' into 3.9.0-rc7-next20130419-11-iniza-small
      Merge branch 'ipc-sem-next-fixes-2' into 3.9.0-rc7-next20130419-11-iniza-small
      Merge branch 'crazy-rcu-double-free-debug-hack' into 3.9.0-rc7-next20130419-12-iniza-small

 include/linux/types.h    |  1 +
 include/net/dst.h        |  2 +-
 ipc/sem.c                | 10 +++++-----
 kernel/rcu.h             |  1 +
 kernel/rcutree.c         |  6 ++++++
 scripts/package/builddeb | 19 ++++++++++++++++---
 6 files changed, 30 insertions(+), 9 deletions(-)

diff --git a/include/linux/types.h b/include/linux/types.h
index 4d118ba..3f0d9da 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -209,6 +209,7 @@ struct ustat {
 struct callback_head {
 	struct callback_head *next;
 	void (*func)(struct callback_head *head);
+	unsigned long magic;
 };
 #define rcu_head callback_head
 
diff --git a/include/net/dst.h b/include/net/dst.h
index 1f8fd10..6f8acd0 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -89,7 +89,7 @@ struct dst_entry {
 	 * (L1_CACHE_SIZE would be too much)
 	 */
 #ifdef CONFIG_64BIT
-	long			__pad_to_align_refcnt[2];
+	long			__pad_to_align_refcnt[1];
 #endif
 	/*
 	 * __refcnt wants to be on a different cache line from
diff --git a/ipc/sem.c b/ipc/sem.c
index 5711616..ec6a035 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -1869,8 +1869,7 @@ void exit_sem(struct task_struct *tsk)
 		struct sem_array *sma;
 		struct sem_undo *un;
 		struct list_head tasks;
-		int semid;
-		int i;
+		int semid, i;
 
 		rcu_read_lock();
 		un = list_entry_rcu(ulp->list_proc.next,
@@ -1886,12 +1885,13 @@ void exit_sem(struct task_struct *tsk)
 		}
 
 		sma = sem_obtain_object_check(tsk->nsproxy->ipc_ns, un->semid);
-		sem_lock(sma, NULL, -1);
-
 		/* exit_sem raced with IPC_RMID, nothing to do */
-		if (IS_ERR(sma))
+		if (IS_ERR(sma)) {
+			rcu_read_unlock();
 			continue;
+		}
 
+		sem_lock(sma, NULL, -1);
 		un = __lookup_undo(ulp, semid);
 		if (un == NULL) {
 			/* exit_sem raced with IPC_RMID+semget() that created
diff --git a/kernel/rcu.h b/kernel/rcu.h
index 7f8e759..0381ed3 100644
--- a/kernel/rcu.h
+++ b/kernel/rcu.h
@@ -98,6 +98,7 @@ static inline bool __rcu_reclaim(char *rn, struct rcu_head *head)
 {
 	unsigned long offset = (unsigned long)head->func;
 
+	head->magic = 0;
 	if (__is_kfree_rcu_offset(offset)) {
 		RCU_TRACE(trace_rcu_invoke_kfree_callback(rn, head, offset));
 		kfree((void *)head - offset);
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index d853430..bdbd38c 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -2358,6 +2358,9 @@ static void __call_rcu_core(struct rcu_state *rsp, struct rcu_data *rdp,
 	}
 }
 
+/* Unlikely bit-pattern to check double RCU calls! */
+#define RCU_HEAD_MAGIC ((unsigned long)(0xfeeddead1acef8edll))
+
 /*
  * Helper function for call_rcu() and friends.  The cpu argument will
  * normally be -1, indicating "currently running CPU".  It may specify
@@ -2372,9 +2375,12 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
 	struct rcu_data *rdp;
 
 	WARN_ON_ONCE((unsigned long)head & 0x3); /* Misaligned rcu_head! */
+	if (WARN_ON_ONCE(head->magic == RCU_HEAD_MAGIC))
+		return;
 	debug_rcu_head_queue(head);
 	head->func = func;
 	head->next = NULL;
+	head->magic = RCU_HEAD_MAGIC;
 
 	/*
 	 * Opportunistically note grace-period endings and beginnings.
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index acb8650..7d7c9d8 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -172,9 +172,22 @@ else
 fi
 maintainer="$name <$email>"
 
+# Try to determine distribution
+if [ -e $(which lsb_release) ]; then
+       codename=$(lsb_release --codename --short)
+       if [ "$codename" != "" ]; then
+		distribution=$codename
+       else
+		distribution="UNRELEASED"
+		echo "WARNING: The distribution could NOT be determined!"
+       fi
+else
+       echo "HINT: Install lsb_release binary, this helps to identify your distribution!"
+fi
+
 # Generate a simple changelog template
 cat <<EOF > debian/changelog
-linux-upstream ($packageversion) unstable; urgency=low
+linux-upstream ($packageversion) $distribution; urgency=low
 
   * Custom built Linux kernel.
 
@@ -188,10 +201,10 @@ This is a packacked upstream version of the Linux kernel.
 The sources may be found at most Linux ftp sites, including:
 ftp://ftp.kernel.org/pub/linux/kernel
 
-Copyright: 1991 - 2009 Linus Torvalds and others.
+Copyright: 1991 - 2013 Linus Torvalds and others.
 
 The git repository for mainline kernel development is at:
-git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by

[-- Attachment #4: config-3.9.0-rc7-next20130419-12-iniza-small --]
[-- Type: application/octet-stream, Size: 112372 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 3.9.0-rc7 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_FHANDLE=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ALWAYS_USE_PERSISTENT_CLOCK=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_PERIODIC_HZ=y
# CONFIG_NO_HZ_IDLE is not set
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_RCU_USER_QS=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_IKCONFIG=m
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
# CONFIG_NUMA_BALANCING is not set
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
# CONFIG_MEMCG_SWAP_ENABLED is not set
# CONFIG_MEMCG_KMEM is not set
# CONFIG_MEMCG_DEBUG_ASYNC_DESTROY is not set
CONFIG_CGROUP_HUGETLB=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
# CONFIG_RD_LZ4 is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_HAVE_UID16=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_LOOP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
CONFIG_MODULE_SIG_SHA512=y
CONFIG_MODULE_SIG_HASH="sha512"
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_NUMACHIP=y
# CONFIG_X86_VSMP is not set
# CONFIG_X86_UV is not set
# CONFIG_X86_INTEL_LPSS is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=500
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_X86_PVH is not set
CONFIG_KVM_GUEST=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=256
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_MICROCODE_INTEL_LIB=y
CONFIG_MICROCODE_INTEL_EARLY=y
CONFIG_MICROCODE_EARLY=y
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_MOVABLE_NODE is not set
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NEED_BOUNCE_POOL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
# CONFIG_MEM_SOFT_DIRTY is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_I2C=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not set
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_ACPI is not set
CONFIG_HOTPLUG_PCI_CPCI=y
# CONFIG_HOTPLUG_PCI_CPCI_ZT5550 is not set
# CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_DMA_ENGINE=y
# CONFIG_RAPIDIO_DEBUG is not set
CONFIG_RAPIDIO_TSI57X=y
CONFIG_RAPIDIO_CPS_XX=y
CONFIG_RAPIDIO_TSI568=y
CONFIG_RAPIDIO_CPS_GEN2=y
CONFIG_RAPIDIO_TSI500=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_X86_X32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_GRE is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=m
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_SCH_PLUG is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_BQL=y
CONFIG_BPF_JIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HIDP is not set

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_BT_ATH3K is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
CONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
# CONFIG_XEN_BLKDEV_BACKEND is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
# CONFIG_BLOCKCONSOLE is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
# CONFIG_VMWARE_VMCI is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_CHELSIO_FCOE is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_HIGHBANK is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARASAN_CF is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=y
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=m
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
CONFIG_MII=y
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_RIONET is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
# CONFIG_ARCNET is not set

#
# CAIF transport drivers
#
# CONFIG_VHOST_NET is not set

#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
CONFIG_NET_CADENCE=y
# CONFIG_ARM_AT91_ETHER is not set
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_PCH_GBE is not set
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
# CONFIG_SFC is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_AT803X_PHY=y
CONFIG_AMD_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_BCM87XX_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_GPIO=y
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_FILTER=y
# CONFIG_PPP_MPPE is not set
CONFIG_PPP_MULTILINK=y
# CONFIG_PPPOE is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_ATH_CARDS is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLWIFI=m
CONFIG_IWLDVM=m
# CONFIG_IWLMVM is not set
CONFIG_IWLWIFI_OPMODE_MODULAR=y

#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWLWIFI_DEBUGFS=y
# CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE is not set
CONFIG_IWLWIFI_DEVICE_TRACING=y
CONFIG_IWLWIFI_DEVICE_TESTMODE=y
# CONFIG_IWLWIFI_P2P is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTLWIFI is not set
CONFIG_WL_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
# CONFIG_HDLC is not set
# CONFIG_DLCI is not set
# CONFIG_SBNI is not set
CONFIG_XEN_NETDEV_FRONTEND=y
# CONFIG_XEN_NETDEV_BACKEND is not set
# CONFIG_VMXNET3 is not set
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
# CONFIG_ISDN_CAPI is not set
# CONFIG_ISDN_DRV_GIGASET is not set
# CONFIG_HYSDN is not set
# CONFIG_MISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_STMPE is not set
# CONFIG_KEYBOARD_TC3589X is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_JOYSTICK_WALKERA0701 is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_88PM860X is not set
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_DA9034 is not set
# CONFIG_TOUCHSCREEN_DA9052 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WM831X is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_PCAP is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMPE is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_88PM860X_ONKEY is not set
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MAX8925_ONKEY is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_TWL6040_VIBRA is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA9052_ONKEY is not set
# CONFIG_INPUT_DA9055_ONKEY is not set
# CONFIG_INPUT_WM831X_ON is not set
# CONFIG_INPUT_PCAP is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_XEN_KBDDEV_FRONTEND is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_NOZOMI is not set
# CONFIG_ISI is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
CONFIG_STALDRV=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=32
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_DW is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_KGDB_NMI=y
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_MAX310X=y
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
CONFIG_TTY_PRINTK=y
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_HW_RANDOM_TPM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
# CONFIG_TCG_ST33_I2C is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set

#
# Qualcomm MSM SSBI bus support
#
# CONFIG_SSBI is not set
# CONFIG_HSI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_ACPI=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
# CONFIG_GPIO_DA9052 is not set
# CONFIG_GPIO_DA9055 is not set

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_TS5500 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_LYNXPOINT is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_SX150X=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
# CONFIG_GPIO_TPS65912 is not set
# CONFIG_GPIO_TWL6040 is not set
# CONFIG_GPIO_WM831X is not set
# CONFIG_GPIO_WM8350 is not set
# CONFIG_GPIO_WM8994 is not set
# CONFIG_GPIO_ADP5520 is not set
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_AMD8111 is not set
CONFIG_GPIO_LANGWELL=y
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
# CONFIG_GPIO_PALMAS is not set
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y

#
# USB GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_MAX8925_POWER is not set
# CONFIG_WM831X_BACKUP is not set
# CONFIG_WM831X_POWER is not set
# CONFIG_WM8350_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_DA9030 is not set
# CONFIG_BATTERY_DA9052 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_CHARGER_TPS65090 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_AVS=y
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DA9052_ADC is not set
# CONFIG_SENSORS_DA9055 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_WM831X is not set
# CONFIG_SENSORS_WM8350 is not set
# CONFIG_SENSORS_APPLESMC is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_CPU_THERMAL=y
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_DA9052_WATCHDOG is not set
# CONFIG_DA9055_WATCHDOG is not set
# CONFIG_WM831X_WATCHDOG is not set
# CONFIG_WM8350_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_XEN_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_AS3711 is not set
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_CROS_EC is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
CONFIG_HTC_I2CPLD=y
CONFIG_LPC_ICH=m
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX8907 is not set
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_EZX_PCAP=y
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
CONFIG_MFD_RC5T583=y
CONFIG_MFD_SEC_CORE=y
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SMSC=y
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
# CONFIG_AB3100_OTP is not set
CONFIG_MFD_STMPE=y

#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
CONFIG_STMPE_SPI=y
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_MFD_LP8788=y
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
CONFIG_TWL6040_CORE=y
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_AAT2870 is not set
# CONFIG_REGULATOR_DA903X is not set
# CONFIG_REGULATOR_DA9052 is not set
# CONFIG_REGULATOR_DA9055 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_88PM8607=y
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8925 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_MAX8997 is not set
# CONFIG_REGULATOR_MAX8998 is not set
# CONFIG_REGULATOR_MAX77686 is not set
# CONFIG_REGULATOR_PCAP is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=y
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LP8788=y
# CONFIG_REGULATOR_RC5T583 is not set
# CONFIG_REGULATOR_S2MPS11 is not set
# CONFIG_REGULATOR_S5M8767 is not set
# CONFIG_REGULATOR_AB3100 is not set
# CONFIG_REGULATOR_PALMAS is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65090 is not set
# CONFIG_REGULATOR_TPS6524X is not set
# CONFIG_REGULATOR_TPS6586X is not set
# CONFIG_REGULATOR_TPS65910 is not set
# CONFIG_REGULATOR_TPS65912 is not set
# CONFIG_REGULATOR_WM831X is not set
# CONFIG_REGULATOR_WM8350 is not set
# CONFIG_REGULATOR_WM8400 is not set
# CONFIG_REGULATOR_WM8994 is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
# CONFIG_VIDEO_V4L2_INT_DEVICE is not set
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
# CONFIG_TTPCI_EEPROM is not set
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y

#
# Media drivers
#
CONFIG_RC_CORE=m
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
# CONFIG_LIRC is not set
# CONFIG_IR_NEC_DECODER is not set
# CONFIG_IR_RC5_DECODER is not set
# CONFIG_IR_RC6_DECODER is not set
# CONFIG_IR_JVC_DECODER is not set
# CONFIG_IR_SONY_DECODER is not set
# CONFIG_IR_RC5_SZ_DECODER is not set
# CONFIG_IR_SANYO_DECODER is not set
# CONFIG_IR_MCE_KBD_DECODER is not set
CONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_IR_ENE is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_ITE_CIR is not set
# CONFIG_IR_FINTEK is not set
# CONFIG_IR_NUVOTON is not set
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_WINBOND_CIR is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_IR_GPIO_CIR is not set
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_USB_PWC is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_USB_SN9C102 is not set

#
# Analog TV USB devices
#
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_TLG2300 is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_VIDEO_STK1160 is not set

#
# Analog/digital TV USB devices
#
# CONFIG_VIDEO_AU0828 is not set
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_TM6000 is not set

#
# Digital TV USB devices
#
# CONFIG_DVB_USB is not set
# CONFIG_DVB_USB_V2 is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_SMS_USB_DRV is not set
# CONFIG_DVB_B2C2_FLEXCOP_USB is not set

#
# Webcam, TV (analog/digital) USB devices
#
# CONFIG_VIDEO_EM28XX is not set
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#

#
# Media capture/analog TV support
#
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set

#
# Media capture/analog/hybrid TV support
#
# CONFIG_VIDEO_CX18 is not set
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_CX25821 is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_SAA7164 is not set

#
# Media digital TV PCI Adapters
#
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set
# CONFIG_DVB_B2C2_FLEXCOP_PCI is not set
# CONFIG_DVB_PLUTO2 is not set
# CONFIG_DVB_DM1105 is not set
# CONFIG_DVB_PT1 is not set
# CONFIG_MANTIS_CORE is not set
# CONFIG_DVB_NGENE is not set
# CONFIG_DVB_DDBRIDGE is not set
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_VIDEO_TIMBERDALE is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
# CONFIG_VIDEO_SH_VEU is not set
CONFIG_V4L_TEST_DRIVERS=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_MEM2MEM_TESTDEV is not set

#
# Supported MMC/SDIO adapters
#
# CONFIG_SMS_SDIO_DRV is not set
CONFIG_MEDIA_PARPORT_SUPPORT=y
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_SI470X=y
# CONFIG_USB_SI470X is not set
# CONFIG_I2C_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_I2C_SI4713 is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#
# CONFIG_RADIO_WL128X is not set
# CONFIG_CYPRESS_FIRMWARE is not set

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#

#
# RDS decoders
#

#
# Video decoders
#

#
# Video and audio decoders
#

#
# Video encoders
#

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#

#
# Miscelaneous helper chips
#

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MC44S803=m

#
# Multistandard (satellite) frontends
#

#
# Multistandard (cable + terrestrial) frontends
#

#
# DVB-S (satellite) frontends
#

#
# DVB-T (terrestrial) frontends
#

#
# DVB-C (cable) frontends
#

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#

#
# ISDB-T (terrestrial) frontends
#

#
# Digital terrestrial only tuners/PLL
#

#
# SEC control devices for DVB-S
#

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
CONFIG_AGP_VIA=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_LOAD_EDID_FIRMWARE=y

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_I810 is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_HDMI=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
# CONFIG_FB_GEODE_LX is not set
# CONFIG_FB_GEODE_GX is not set
# CONFIG_FB_GEODE_GX1 is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
CONFIG_EXYNOS_VIDEO=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
# CONFIG_BACKLIGHT_DA903X is not set
# CONFIG_BACKLIGHT_DA9052 is not set
# CONFIG_BACKLIGHT_MAX8925 is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_WM831X is not set
# CONFIG_BACKLIGHT_ADP5520 is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_88PM860X is not set
# CONFIG_BACKLIGHT_AAT2870 is not set
# CONFIG_BACKLIGHT_LM3630 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_LP8788 is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set

#
# HID support
#
CONFIG_HID=m
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_PS3REMOTE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set

#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_CHIPIDEA is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_PHY is not set
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
# CONFIG_MMC_BLOCK is not set
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8788 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_WM831X_STATUS is not set
# CONFIG_LEDS_WM8350 is not set
# CONFIG_LEDS_DA903X is not set
# CONFIG_LEDS_DA9052 is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_ADP5520 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_MAX8997 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_BLINKM is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_DECODE_MCE is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_88PM860X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_LP8788 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_MAX8925 is not set
# CONFIG_RTC_DRV_MAX8998 is not set
# CONFIG_RTC_DRV_MAX8997 is not set
# CONFIG_RTC_DRV_MAX77686 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PALMAS is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_TPS6586X is not set
# CONFIG_RTC_DRV_TPS65910 is not set
# CONFIG_RTC_DRV_RC5T583 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_RX4581 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DA9052 is not set
# CONFIG_RTC_DRV_DA9055 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_WM831X is not set
# CONFIG_RTC_DRV_WM8350 is not set
# CONFIG_RTC_DRV_AB3100 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_PCAP is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_DW_DMAC is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_PCH_DMA is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
CONFIG_AUXDISPLAY=y
# CONFIG_KS0108 is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SELFBALLOONING=y
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
CONFIG_XEN_SCRUB_PAGES=y
# CONFIG_XEN_DEV_EVTCHN is not set
CONFIG_XEN_BACKEND=y
# CONFIG_XENFS is not set
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
# CONFIG_XEN_PCIDEV_BACKEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=y
CONFIG_XEN_MCE_LOG=y
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_STAGING=y
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_W35UND is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_PANEL is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
# CONFIG_RTS5139 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_DX_SEP is not set
# CONFIG_ZRAM is not set
CONFIG_ZSMALLOC=y
# CONFIG_FB_SM7XX is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_FB_XGI is not set
# CONFIG_ACPI_QUICKSTART is not set
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
CONFIG_STAGING_MEDIA=y
# CONFIG_DVB_AS102 is not set
# CONFIG_DVB_CXD2099 is not set
# CONFIG_VIDEO_DT3155 is not set
# CONFIG_VIDEO_GO7007 is not set
# CONFIG_SOLO6X10 is not set

#
# Android
#
CONFIG_ANDROID=y
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ASHMEM=y
# CONFIG_ANDROID_LOGGER is not set
CONFIG_ANDROID_TIMED_OUTPUT=y
# CONFIG_ANDROID_TIMED_GPIO is not set
CONFIG_ANDROID_LOW_MEMORY_KILLER=y
CONFIG_ANDROID_INTF_ALARM_DEV=y
# CONFIG_SYNC is not set
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_CSR_WIFI is not set
CONFIG_NET_VENDOR_SILICOM=y
# CONFIG_SBYPASS is not set
# CONFIG_BPCTL is not set
# CONFIG_CED1401 is not set
# CONFIG_DGRP is not set
# CONFIG_ZCACHE is not set
# CONFIG_USB_DWC2 is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_CHROMEOS_LAPTOP is not set
# CONFIG_DELL_WMI is not set
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ASUS_WMI is not set
CONFIG_ACPI_WMI=m
# CONFIG_MSI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
CONFIG_SAMSUNG_LAPTOP=m
# CONFIG_MXM_WMI is not set
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_STATS=y
# CONFIG_AMD_IOMMU_V2 is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y

#
# DEVFREQ Drivers
#
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_MAX77693 is not set
# CONFIG_EXTCON_MAX8997 is not set
CONFIG_MEMORY=y
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
CONFIG_EFI_VARS_PSTORE=y
# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=y
# CONFIG_ECRYPT_FS_MESSAGING is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_FTRACE is not set
# CONFIG_PSTORE_RAM is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
# CONFIG_DEBUG_OBJECTS_FREE is not set
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y

#
# RCU Debugging
#
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_UPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
# CONFIG_MMIOTRACE_TEST is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_NMI_SELFTEST is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_PATH=y
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_SECURITY_SMACK=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
CONFIG_SECURITY_YAMA=y
CONFIG_SECURITY_YAMA_STACKED=y
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
# CONFIG_INTEGRITY_ASYMMETRIC_KEYS is not set
# CONFIG_IMA is not set
CONFIG_EVM=y
CONFIG_EVM_HMAC_VERSION=2
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_YAMA is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="apparmor"
CONFIG_XOR_BLOCKS=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ABLK_HELPER_X86=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=m

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_AES_NI_INTEL=m
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
# CONFIG_CRYPTO_DEV_PADLOCK_AES is not set
# CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_MMU_AUDIT is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_PERCPU_RWSEM=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
CONFIG_DDR=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
  2013-04-20  0:06                               ` Sedat Dilek
@ 2013-04-20  0:19                                 ` Sedat Dilek
  2013-04-20 12:46                                   ` Sedat Dilek
  2013-04-20 20:00                                   ` Davidlohr Bueso
  0 siblings, 2 replies; 21+ messages in thread
From: Sedat Dilek @ 2013-04-20  0:19 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Davidlohr Bueso, Rik van Riel, Daniel Vetter, Stephen Rothwell,
	linux-next, Linux Kernel Mailing List, the arch/x86 maintainers,
	Ingo Molnar, Thomas Gleixner, Paul McKenney, Paul McKenney, DRI,
	Dave Airlie, Emmanuel Benisty

[-- Attachment #1: Type: text/plain, Size: 1321 bytes --]

On Sat, Apr 20, 2013 at 2:06 AM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> On Sat, Apr 20, 2013 at 1:02 AM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
>> On Fri, Apr 19, 2013 at 3:55 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>>>
>>> Davidlohr pointed to this patch (tested the triplet):
>>>
>>> ipc, sem: do not call sem_lock when bogus sma:
>>> https://lkml.org/lkml/2013/3/31/12
>>>
>>> Is that what you mean?
>>
>> Yup.
>>
>
> Davidlohr Bueso (1):
>       ipc, sem: do not call sem_lock when bogus sma
>
> Linus Torvalds (1):
>       crazy rcu double free debug hack
>
> With ***both*** patches applied I am able to build a Linux-kernel with
> 4 parallel-make-jobs again.
> David's or your patch alone are not sufficient!
>

[ Still both patches applied ]

To correct myself... The 1st run was OK.

The 2nd run shows a NULL-pointer-deref (excerpt):

[  178.490583] BUG: spinlock bad magic on CPU#1, sh/8066
[  178.490595]  lock: 0xffff88008b53ea18, .magic: 6b6b6b6b, .owner:
make/8068, .owner_cpu: 3
[  178.490599] BUG: unable to handle kernel NULL pointer dereference
at           (null)
[  178.490608] IP: [<ffffffff812bacd0>] update_queue+0x70/0x210
[  178.490610] PGD 0
[  178.490612] Oops: 0000 [#1] SMP
...

See attached full dmesg!

Hope this helps.

- Sedat -


> - Sedat -
>
>>     Linus

[-- Attachment #2: dmesg_3.9.0-rc7-next20130419-12-iniza-small_BROKEN.txt --]
[-- Type: text/plain, Size: 69633 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.9.0-rc7-next20130419-12-iniza-small (sedat.dilek@gmail.com@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Sat Apr 20 01:44:21 CEST 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc7-next20130419-12-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask FE0000000 write-back
[    0.000000]   6 base 11FE00000 mask FFFE00000 uncachable
[    0.000000]   7 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x0202c000, 0x0202cfff] PGTABLE
[    0.000000] BRK [0x0202d000, 0x0202dfff] PGTABLE
[    0.000000] BRK [0x0202e000, 0x0202efff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff]
[    0.000000]  [mem 0x11fc00000-0x11fdfffff] page 2M
[    0.000000] BRK [0x0202f000, 0x0202ffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff]
[    0.000000]  [mem 0x11c000000-0x11fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff]
[    0.000000]  [mem 0x40200000-0xd9bfffff] page 2M
[    0.000000]  [mem 0xd9c00000-0xd9c9efff] page 4k
[    0.000000] BRK [0x02030000, 0x02030fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[    0.000000]  [mem 0xdafff000-0xdaffffff] page 4k
[    0.000000] RAMDISK: [mem 0x379ae000-0x37ccefff]
[    0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[    0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD  SNB-CPT 00000000 INTL 20061109)
[    0.000000] ACPI: FACS 00000000daf47000 00040
[    0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[    0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000dafea000 00996 (v01  PmRef    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL      COMBUF 00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01   Iffs  IffsAsl 00003000 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff]
[    0.000000]   NODE_DATA [mem 0x11fdf7000-0x11fdfbfff]
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x11fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xd9c9efff]
[    0.000000]   node   0: [mem 0xdafff000-0xdaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x11fdfffff]
[    0.000000] On node 0 totalpages: 1021500
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12127 pages used for memmap
[    0.000000]   DMA32 zone: 886944 pages, LIFO batch:31
[    0.000000]   Normal zone: 1785 pages used for memmap
[    0.000000]   Normal zone: 130560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000
[    0.000000] PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000
[    0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
[    0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
[    0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[    0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[    0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[    0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s86208 r8192 d24384 u262144
[    0.000000] pcpu-alloc: s86208 r8192 d24384 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1007376
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc7-next20130419-12-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3938740k/4716544k available (6984k kernel code, 630544k absent, 147260k reserved, 6317k data, 1312k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] ODEBUG: 0 of 0 active objects replaced
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1596.424 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.84 BogoMIPS (lpj=6385696)
[    0.000009] pid_max: default: 32768 minimum: 301
[    0.000140] Security Framework initialized
[    0.000151] AppArmor: AppArmor initialized
[    0.000154] Yama: becoming mindful.
[    0.000540] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001604] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002072] Mount-cache hash table entries: 256
[    0.002590] Initializing cgroup subsys memory
[    0.002660] Initializing cgroup subsys devices
[    0.002664] Initializing cgroup subsys freezer
[    0.002668] Initializing cgroup subsys blkio
[    0.002671] Initializing cgroup subsys perf_event
[    0.002676] Initializing cgroup subsys hugetlb
[    0.002760] Disabled fast string operations
[    0.002764] CPU: Physical Processor ID: 0
[    0.002766] CPU: Processor Core ID: 0
[    0.002773] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.002773] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002780] mce: CPU supports 7 MCE banks
[    0.002797] CPU0: Thermal monitoring enabled (TM1)
[    0.002810] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.002810] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.002810] tlb_flushall_shift: 5
[    0.002903] Freeing SMP alternatives: 24k freed
[    0.003878] ACPI: Core revision 20130328
[    0.014673] ACPI: All ACPI Tables successfully acquired
[    0.016219] ftrace: allocating 26388 entries in 104 pages
[    0.031034] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.070697] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
[    0.070710] TSC deadline timer enabled
[    0.070722] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[    0.070735] ... version:                3
[    0.070738] ... bit width:              48
[    0.070740] ... generic registers:      4
[    0.070742] ... value mask:             0000ffffffffffff
[    0.070745] ... max period:             000000007fffffff
[    0.070747] ... fixed-purpose events:   3
[    0.070750] ... event mask:             000000070000000f
[    0.083768] Disabled fast string operations
[    0.086948] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.098491] Disabled fast string operations
[    0.112149] Disabled fast string operations
[    0.072735] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.114280] Brought up 4 CPUs
[    0.114288] smpboot: Total of 4 processors activated (12771.39 BogoMIPS)
[    0.118305] devtmpfs: initialized
[    0.120290] EVM: security.selinux
[    0.120293] EVM: security.SMACK64
[    0.120295] EVM: security.capability
[    0.120383] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
[    0.121868] regulator-dummy: no parameters
[    0.122022] NET: Registered protocol family 16
[    0.122368] ACPI: bus type PCI registered
[    0.122484] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.122490] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.129348] PCI: Using configuration type 1 for base access
[    0.132640] bio: create slab <bio-0> at 0
[    0.133038] ACPI: Added _OSI(Module Device)
[    0.133042] ACPI: Added _OSI(Processor Device)
[    0.133046] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.133050] ACPI: Added _OSI(Processor Aggregator Device)
[    0.134811] ACPI: EC: Look up EC in DSDT
[    0.158354] ACPI: Executed 1 blocks of module-level executable AML code
[    0.164297] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.175791] ACPI: SSDT 00000000dae70718 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.176296] ACPI: Dynamic OEM Table Load:
[    0.176301] ACPI: SSDT           (null) 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.186776] ACPI: SSDT 00000000dae71a98 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.187360] ACPI: Dynamic OEM Table Load:
[    0.187365] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.198465] ACPI: SSDT 00000000dae6fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.198945] ACPI: Dynamic OEM Table Load:
[    0.198948] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.212707] ACPI: Interpreter enabled
[    0.212725] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[    0.212749] ACPI: (supports S0 S1 S3 S4 S5)
[    0.212752] ACPI: Using IOAPIC for interrupt routing
[    0.212810] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.236551] ACPI: Power Resource [FN00] (off)
[    0.236737] ACPI: Power Resource [FN01] (off)
[    0.236922] ACPI: Power Resource [FN02] (off)
[    0.237103] ACPI: Power Resource [FN03] (off)
[    0.237291] ACPI: Power Resource [FN04] (off)
[    0.238393] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.238736] \_SB_.PCI0:_OSC invalid UUID
[    0.238738] _OSC request data:1 8 0 
[    0.239730] PCI host bridge to bus 0000:00
[    0.239736] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.239740] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.239744] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.239748] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.239751] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[    0.239755] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.239773] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.239933] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.239946] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.239954] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.239959] pci 0000:00:02.0: reg 20: [io  0x3000-0x303f]
[    0.240152] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.240178] pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit]
[    0.240264] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.240428] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.240452] pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff]
[    0.240553] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.240658] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.240676] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit]
[    0.240755] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.240801] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.240871] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.240962] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.241011] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.241084] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.241174] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.241230] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.241303] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.241434] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.241567] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.241592] pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff]
[    0.241693] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.241794] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.241996] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.242018] pci 0000:00:1f.2: reg 10: [io  0x3088-0x308f]
[    0.242028] pci 0000:00:1f.2: reg 14: [io  0x3094-0x3097]
[    0.242038] pci 0000:00:1f.2: reg 18: [io  0x3080-0x3087]
[    0.242048] pci 0000:00:1f.2: reg 1c: [io  0x3090-0x3093]
[    0.242058] pci 0000:00:1f.2: reg 20: [io  0x3060-0x307f]
[    0.242068] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff]
[    0.242121] pci 0000:00:1f.2: PME# supported from D3hot
[    0.242240] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.242258] pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit]
[    0.242282] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
[    0.242662] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
[    0.242827] pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit]
[    0.243562] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.243732] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.250458] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.250467] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.250645] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.250715] pci 0000:02:00.0: reg 10: [io  0x2000-0x20ff]
[    0.250838] pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref]
[    0.250914] pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]
[    0.251242] pci 0000:02:00.0: supports D1 D2
[    0.251244] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.251371] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.258375] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.258390] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.258412] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.258612] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.258650] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit]
[    0.258847] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.266369] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.266389] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.266589] \_SB_.PCI0:_OSC invalid UUID
[    0.266590] _OSC request data:1 1f 0 
[    0.266595] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.266600] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.267493] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.267615] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.267732] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.267848] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.267962] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.268079] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.268195] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.268310] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.268932] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.268942] acpi root: \_SB_.PCI0 notify handler is installed
[    0.269003] Found 1 acpi root devices
[    0.269070] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.269277] ACPI: No dock devices found.
[    0.269482] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.269489] vgaarb: loaded
[    0.269491] vgaarb: bridge control possible 0000:00:02.0
[    0.270169] SCSI subsystem initialized
[    0.270173] ACPI: bus type ATA registered
[    0.270286] libata version 3.00 loaded.
[    0.270351] ACPI: bus type USB registered
[    0.270401] usbcore: registered new interface driver usbfs
[    0.270427] usbcore: registered new interface driver hub
[    0.270481] usbcore: registered new device driver usb
[    0.270799] PCI: Using ACPI for IRQ routing
[    0.272466] PCI: pci_cache_line_size set to 64 bytes
[    0.272577] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.272580] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
[    0.272582] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.272584] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[    0.272860] NetLabel: Initializing
[    0.272863] NetLabel:  domain hash size = 128
[    0.272865] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.272914] NetLabel:  unlabeled traffic allowed by default
[    0.272998] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.273008] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.276025] Switching to clocksource hpet
[    0.293302] AppArmor: AppArmor Filesystem Enabled
[    0.293362] pnp: PnP ACPI init
[    0.293382] ACPI: bus type PNP registered
[    0.293749] pnp 00:00: [dma 4]
[    0.293793] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.293835] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.294005] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.294059] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.294136] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.294142] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.294146] system 00:04: [io  0x5000-0x5003] has been reserved
[    0.294150] system 00:04: [io  0xffff] has been reserved
[    0.294154] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.294158] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.294162] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.294165] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.294169] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.294174] system 00:04: [io  0x5000-0x500f] could not be reserved
[    0.294179] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.294225] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.294319] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.294325] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.294383] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.294473] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[    0.294787] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.294792] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.294796] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.294800] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.294805] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.294809] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.294813] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.294817] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.294821] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.294826] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.294831] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.295564] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.295602] pnp: PnP ACPI: found 11 devices
[    0.295605] ACPI: bus type PNP unregistered
[    0.303169] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.303179] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.303191] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.303197] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.303207] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.303218] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.303225] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.303664] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.303667] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.303669] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.303671] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[    0.303673] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.303675] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[    0.303677] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.303679] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.303681] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.303799] NET: Registered protocol family 2
[    0.304156] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.304340] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.304622] TCP: Hash tables configured (established 32768 bind 32768)
[    0.304882] TCP: reno registered
[    0.304903] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    0.304970] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    0.305212] NET: Registered protocol family 1
[    0.305234] pci 0000:00:02.0: Boot video device
[    0.306007] PCI: CLS 64 bytes, default 64
[    0.306219] Trying to unpack rootfs image as initramfs...
[    0.377696] Freeing initrd memory: 3204k freed
[    0.378381] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.378391] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff]
[    0.378727] Scanning for low memory corruption every 60 seconds
[    0.379101] Initialise module verification
[    0.379164] audit: initializing netlink socket (disabled)
[    0.379184] type=2000 audit(1366423802.372:1): initialized
[    0.409428] bounce pool size: 64 pages
[    0.409456] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.410065] VFS: Disk quotas dquot_6.5.2
[    0.410111] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.410839] fuse init (API version 7.21)
[    0.410935] msgmni has been set to 7699
[    0.411482] Key type asymmetric registered
[    0.411486] Asymmetric key parser 'x509' registered
[    0.411532] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.411586] io scheduler noop registered
[    0.411590] io scheduler deadline registered (default)
[    0.411625] io scheduler cfq registered
[    0.412035] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.412080] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.412174] intel_idle: MWAIT substates: 0x21120
[    0.412175] intel_idle: v0.4 model 0x2A
[    0.412177] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.412656] ACPI: AC Adapter [ADP1] (on-line)
[    0.413118] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.413143] ACPI: Lid Switch [LID0]
[    0.413212] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.413219] ACPI: Power Button [PWRB]
[    0.413282] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.413288] ACPI: Power Button [PWRF]
[    0.413388] ACPI: Fan [FAN0] (off)
[    0.413442] ACPI: Fan [FAN1] (off)
[    0.413495] ACPI: Fan [FAN2] (off)
[    0.413548] ACPI: Fan [FAN3] (off)
[    0.413601] ACPI: Fan [FAN4] (off)
[    0.413696] ACPI: Requesting acpi_cpufreq
[    0.420943] thermal LNXTHERM:00: registered as thermal_zone0
[    0.420949] ACPI: Thermal Zone [TZ00] (75 C)
[    0.421379] thermal LNXTHERM:01: registered as thermal_zone1
[    0.421383] ACPI: Thermal Zone [TZ01] (30 C)
[    0.421440] GHES: HEST is not enabled!
[    0.421642] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.426070] ACPI: Battery Slot [BAT1] (battery present)
[    0.426244] Linux agpgart interface v0.103
[    0.428688] brd: module loaded
[    0.429911] loop: module loaded
[    0.430133] mei_me 0000:00:16.0: setting latency timer to 64
[    0.430198] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[    0.433145] ahci 0000:00:1f.2: version 3.0
[    0.433333] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    0.433544] ahci: SSS flag set, parallel bus scan disabled
[    0.447949] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[    0.447955] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    0.447964] ahci 0000:00:1f.2: setting latency timer to 64
[    0.472729] scsi0 : ahci
[    0.472886] scsi1 : ahci
[    0.472997] scsi2 : ahci
[    0.473107] scsi3 : ahci
[    0.473222] scsi4 : ahci
[    0.473365] scsi5 : ahci
[    0.473441] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41
[    0.473446] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41
[    0.473450] ata3: DUMMY
[    0.473454] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41
[    0.473459] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41
[    0.473462] ata6: DUMMY
[    0.474370] libphy: Fixed MDIO Bus: probed
[    0.474638] tun: Universal TUN/TAP device driver, 1.6
[    0.474641] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.474713] PPP generic driver version 2.4.2
[    0.474819] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.474822] ehci-pci: EHCI PCI platform driver
[    0.475002] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.475011] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.475021] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.475045] ehci-pci 0000:00:1a.0: debug port 2
[    0.478966] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.479012] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000
[    0.487899] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.487946] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.487950] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.487954] usb usb1: Product: EHCI Host Controller
[    0.487958] usb usb1: Manufacturer: Linux 3.9.0-rc7-next20130419-12-iniza-small ehci_hcd
[    0.487962] usb usb1: SerialNumber: 0000:00:1a.0
[    0.488120] hub 1-0:1.0: USB hub found
[    0.488129] hub 1-0:1.0: 2 ports detected
[    0.488406] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.488413] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.488422] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.488444] ehci-pci 0000:00:1d.0: debug port 2
[    0.492352] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.492396] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000
[    0.503890] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.503933] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.503937] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.503941] usb usb2: Product: EHCI Host Controller
[    0.503944] usb usb2: Manufacturer: Linux 3.9.0-rc7-next20130419-12-iniza-small ehci_hcd
[    0.503948] usb usb2: SerialNumber: 0000:00:1d.0
[    0.504092] hub 2-0:1.0: USB hub found
[    0.504100] hub 2-0:1.0: 2 ports detected
[    0.504230] ehci-platform: EHCI generic platform driver
[    0.504248] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.504284] uhci_hcd: USB Universal Host Controller Interface driver
[    0.504417] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.504426] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    0.514207] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.514214] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[    0.514221] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[    0.514228] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[    0.514235] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[    0.514515] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.514519] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.514523] usb usb3: Product: xHCI Host Controller
[    0.514526] usb usb3: Manufacturer: Linux 3.9.0-rc7-next20130419-12-iniza-small xhci_hcd
[    0.514530] usb usb3: SerialNumber: 0000:03:00.0
[    0.514634] xHCI xhci_add_endpoint called for root hub
[    0.514636] xHCI xhci_check_bandwidth called for root hub
[    0.514673] hub 3-0:1.0: USB hub found
[    0.514685] hub 3-0:1.0: 2 ports detected
[    0.514790] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.514797] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    0.514857] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.514861] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.514865] usb usb4: Product: xHCI Host Controller
[    0.514868] usb usb4: Manufacturer: Linux 3.9.0-rc7-next20130419-12-iniza-small xhci_hcd
[    0.514872] usb usb4: SerialNumber: 0000:03:00.0
[    0.514972] xHCI xhci_add_endpoint called for root hub
[    0.514974] xHCI xhci_check_bandwidth called for root hub
[    0.515007] hub 4-0:1.0: USB hub found
[    0.515021] hub 4-0:1.0: 2 ports detected
[    0.531944] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[    0.538158] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.538166] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.538376] mousedev: PS/2 mouse device common for all mice
[    0.538814] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.538851] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.538911] device-mapper: uevent: version 1.0.3
[    0.538984] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    0.539178] cpuidle: using governor ladder
[    0.539187] ledtrig-cpu: registered to indicate activity on CPUs
[    0.539190] EFI Variables Facility v0.08 2004-May-17
[    0.539394] ashmem: initialized
[    0.539544] TCP: cubic registered
[    0.539637] NET: Registered protocol family 10
[    0.540087] NET: Registered protocol family 17
[    0.540117] Key type dns_resolver registered
[    0.540532] PM: Hibernation image not present or could not be loaded.
[    0.540534] Loading module verification certificates
[    0.541639] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 381be3313c230c25c9d3034dfe3c1c9499d91901'
[    0.541671] registered taskstats version 1
[    0.545308] Key type trusted registered
[    0.546054] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.548941] Key type encrypted registered
[    0.592896] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.592905] EDD information not available.
[    0.791802] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.792936] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[    0.792962] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.793960] ata1.00: configured for UDMA/133
[    0.794281] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[    0.794535] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.794542] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.794633] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.794664] sd 0:0:0:0: [sda] Write Protect is off
[    0.794669] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.794713] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.799726] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.832824]  sda: sda1 sda2 sda3
[    0.833977] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.940055] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    0.940077] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.940623] hub 1-1:1.0: USB hub found
[    0.940750] hub 1-1:1.0: 6 ports detected
[    1.055548] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.111570] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.112362] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133
[    1.112387] ata2.00: 31277232 sectors, multi 1: LBA48 
[    1.113081] ata2.00: configured for UDMA/133
[    1.113446] scsi 1:0:0:0: Direct-Access     ATA      SanDisk iSSD P4  SSD  PQ: 0 ANSI: 5
[    1.113722] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    1.113743] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.113907] sd 1:0:0:0: [sdb] Write Protect is off
[    1.113913] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.114071] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.115100]  sdb: sdb1 sdb2
[    1.115751] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.192142] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.192153] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.192638] hub 2-1:1.0: USB hub found
[    1.192804] hub 2-1:1.0: 6 ports detected
[    1.267541] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.375329] tsc: Refined TSC clocksource calibration: 1596.374 MHz
[    1.375358] Switching to clocksource tsc
[    1.377702] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e
[    1.377719] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.377736] usb 1-1.2: Product: USB-PS/2 Optical Mouse
[    1.377740] usb 1-1.2: Manufacturer: Logitech
[    1.431333] ata4: SATA link down (SStatus 0 SControl 300)
[    1.451410] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    1.707542] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018
[    1.707553] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.707560] usb 1-1.4: Product: WebCam SC-13HDL11431N
[    1.707564] usb 1-1.4: Manufacturer: 123
[    1.751107] ata5: SATA link down (SStatus 0 SControl 300)
[    1.752562] Freeing unused kernel memory: 1312k freed
[    1.752807] Write protecting the kernel read-only data: 12288k
[    1.756664] Freeing unused kernel memory: 1196k freed
[    1.760097] Freeing unused kernel memory: 1056k freed
[    1.785680] udevd[120]: starting version 175
[    1.903015] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.903426] r8169 0000:02:00.0: irq 47 for MSI/MSI-X
[    1.906669] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47
[    1.906682] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.914526] hidraw: raw HID events driver (C) Jiri Kosina
[    1.925054] usbcore: registered new interface driver usbhid
[    1.925063] usbhid: USB HID core driver
[    1.951026] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[    1.970613] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[    1.971170] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[    2.051587] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
[    2.051611] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.676079] EXT4-fs (loop0): INFO: recovery required on readonly filesystem
[    2.676087] EXT4-fs (loop0): write access will be enabled during recovery
[    3.416999] EXT4-fs (loop0): orphan cleanup on readonly fs
[    3.435205] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 525679
[    3.462778] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 408646
[    3.475380] EXT4-fs (loop0): 2 orphan inodes deleted
[    3.475388] EXT4-fs (loop0): recovery complete
[    3.638965] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[   25.203182] Adding 262140k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262140k FS
[   25.258241] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[   25.295979] udevd[579]: starting version 175
[   25.682570] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[   25.682580] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   25.682586] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   25.682592] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   25.682594] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   25.682598] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   25.682600] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   25.682605] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   25.682607] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   26.008704] Bluetooth: Core ver 2.16
[   26.008742] NET: Registered protocol family 31
[   26.008745] Bluetooth: HCI device and connection manager initialized
[   26.008761] Bluetooth: HCI socket layer initialized
[   26.008772] Bluetooth: L2CAP socket layer initialized
[   26.008794] Bluetooth: SCO socket layer initialized
[   26.226524] lp: driver loaded but no devices found
[   26.314845] samsung_laptop: detected SABI interface: SwSmi@
[   26.314850] samsung_laptop: Backlight controlled by ACPI video driver
[   26.395806] wmi: Mapper loaded
[   26.543763] cfg80211: Calling CRDA to update world regulatory domain
[   26.752642] usbcore: registered new interface driver btusb
[   26.754363] Linux video capture interface: v2.00
[   26.813689] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[   26.921098] type=1400 audit(1366416628.931:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=788 comm="apparmor_parser"
[   26.921196] type=1400 audit(1366416628.931:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=703 comm="apparmor_parser"
[   26.921710] type=1400 audit(1366416628.931:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=788 comm="apparmor_parser"
[   26.921963] type=1400 audit(1366416628.931:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=703 comm="apparmor_parser"
[   26.922073] type=1400 audit(1366416628.931:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=788 comm="apparmor_parser"
[   26.922500] type=1400 audit(1366416628.931:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=703 comm="apparmor_parser"
[   27.036262] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[   27.039499] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[   27.042324] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[   27.048655] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   27.170053] cfg80211: World regulatory domain updated:
[   27.170059] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   27.170062] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.170065] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   27.170068] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   27.170070] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.170072] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.184830] [drm] Initialized drm 1.1.0 20060810
[   27.212998] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[   27.213004] Copyright(c) 2003-2013 Intel Corporation
[   27.213737] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X
[   27.214960] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   27.232196] init: failsafe main process (924) killed by TERM signal
[   27.298727] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   27.298733] Bluetooth: BNEP filters: protocol multicast
[   27.298749] Bluetooth: BNEP socket layer initialized
[   27.365294] type=1400 audit(1366416629.375:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1061 comm="apparmor_parser"
[   27.365890] type=1400 audit(1366416629.375:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1061 comm="apparmor_parser"
[   27.366247] type=1400 audit(1366416629.375:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1061 comm="apparmor_parser"
[   27.391891] Bluetooth: RFCOMM TTY layer initialized
[   27.391922] Bluetooth: RFCOMM socket layer initialized
[   27.391925] Bluetooth: RFCOMM ver 1.11
[   27.395458] ppdev: user-space parallel port driver
[   27.522274] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[   27.531413] type=1400 audit(1366416629.539:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1060 comm="apparmor_parser"
[   27.541856] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input5
[   27.542063] usbcore: registered new interface driver uvcvideo
[   27.542067] USB Video Class driver (1.1.1)
[   27.837469] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[   27.856304] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[   27.893273] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled
[   27.893279] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   27.893282] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   27.893285] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[   27.893288] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
[   27.893292] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[   27.893345] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   27.912541] [drm] Memory usable by graphics device = 2048M
[   27.912556] i915 0000:00:02.0: setting latency timer to 64
[   27.944104] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[   27.944123] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   27.944126] [drm] Driver supports precise vblank timestamp query.
[   27.944381] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   27.949567] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   27.964885] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
[   27.971896] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[   27.985322] [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
[   27.991662] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   27.998625] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   27.999156] [drm] Wrong MCH_SSKPD value: 0x16040307
[   27.999160] [drm] This can cause pipe underruns and display issues.
[   27.999162] [drm] Please upgrade your BIOS to fix this.
[   28.011796] init: alsa-restore main process (1161) terminated with status 19
[   28.037463] fbcon: inteldrmfb (fb0) is primary device
[   28.389267] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   28.395889] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   28.604320] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   28.988098] Console: switching to colour frame buffer device 170x48
[   28.991713] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   28.991729] i915 0000:00:02.0: registered panic notifier
[   29.009449] acpi device:33: registered as cooling_device9
[   29.009848] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   29.010085] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   29.010691] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   29.011808] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[   29.108643] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   29.108787] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   29.108910] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   29.402255] init: plymouth-stop pre-start process (1443) terminated with status 1
[   29.807411] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   34.760829] wlan0: authenticate with 00:04:0e:e4:00:3d
[   34.765899] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[   34.768275] wlan0: authenticated
[   34.768419] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   34.768424] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   34.771667] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[   34.775312] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[   34.780272] wlan0: associated
[   34.780339] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   72.610927] show_signal_msg: 45 callbacks suppressed
[   72.610933] firefox[3126]: segfault at 7f93acbb5768 ip 00007f93acb97362 sp 00007fff62bfcda8 error 7 in libGL.so.1.2.0[7f93acb97000+7b000]
[   89.319764] cpufreq_ondemand: od_init: tuners ffff88005d29d800
[  173.621509] iwlwifi 0000:01:00.0: fail to flush all tx fifo queues Q 0
[  173.621516] iwlwifi 0000:01:00.0: Current SW read_ptr 5 write_ptr 6
[  173.621566] iwl data: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  173.621601] iwlwifi 0000:01:00.0: FH TRBs(0) = 0x00000000
[  173.621637] iwlwifi 0000:01:00.0: FH TRBs(1) = 0x8010207b
[  173.621673] iwlwifi 0000:01:00.0: FH TRBs(2) = 0x00000000
[  173.621710] iwlwifi 0000:01:00.0: FH TRBs(3) = 0x80300005
[  173.621730] iwlwifi 0000:01:00.0: FH TRBs(4) = 0x00000000
[  173.621767] iwlwifi 0000:01:00.0: FH TRBs(5) = 0x00000000
[  173.621787] iwlwifi 0000:01:00.0: FH TRBs(6) = 0x00000000
[  173.621807] iwlwifi 0000:01:00.0: FH TRBs(7) = 0x0070904c
[  173.621886] iwlwifi 0000:01:00.0: Q 0 is active and mapped to fifo 3 ra_tid 0x0000 [6,6]
[  173.621963] iwlwifi 0000:01:00.0: Q 1 is active and mapped to fifo 2 ra_tid 0x0000 [0,0]
[  173.622041] iwlwifi 0000:01:00.0: Q 2 is active and mapped to fifo 1 ra_tid 0x0000 [124,124]
[  173.622118] iwlwifi 0000:01:00.0: Q 3 is active and mapped to fifo 0 ra_tid 0x0000 [0,0]
[  173.622195] iwlwifi 0000:01:00.0: Q 4 is active and mapped to fifo 0 ra_tid 0x0000 [0,0]
[  173.622273] iwlwifi 0000:01:00.0: Q 5 is active and mapped to fifo 4 ra_tid 0x0000 [0,0]
[  173.622350] iwlwifi 0000:01:00.0: Q 6 is active and mapped to fifo 2 ra_tid 0x0000 [0,0]
[  173.622427] iwlwifi 0000:01:00.0: Q 7 is active and mapped to fifo 5 ra_tid 0x0000 [0,0]
[  173.622505] iwlwifi 0000:01:00.0: Q 8 is active and mapped to fifo 4 ra_tid 0x0000 [0,0]
[  173.622581] iwlwifi 0000:01:00.0: Q 9 is active and mapped to fifo 7 ra_tid 0x0000 [77,77]
[  173.622659] iwlwifi 0000:01:00.0: Q 10 is active and mapped to fifo 5 ra_tid 0x0000 [0,0]
[  173.622736] iwlwifi 0000:01:00.0: Q 11 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
[  173.622813] iwlwifi 0000:01:00.0: Q 12 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
[  173.622890] iwlwifi 0000:01:00.0: Q 13 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
[  173.622968] iwlwifi 0000:01:00.0: Q 14 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
[  173.623045] iwlwifi 0000:01:00.0: Q 15 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
[  173.623123] iwlwifi 0000:01:00.0: Q 16 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
[  173.623200] iwlwifi 0000:01:00.0: Q 17 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
[  173.623278] iwlwifi 0000:01:00.0: Q 18 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
[  173.623355] iwlwifi 0000:01:00.0: Q 19 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
[  178.490583] BUG: spinlock bad magic on CPU#1, sh/8066
[  178.490595]  lock: 0xffff88008b53ea18, .magic: 6b6b6b6b, .owner: make/8068, .owner_cpu: 3
[  178.490599] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  178.490608] IP: [<ffffffff812bacd0>] update_queue+0x70/0x210
[  178.490610] PGD 0 
[  178.490612] Oops: 0000 [#1] SMP 
[  178.490648] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek coretemp joydev kvm_intel snd_hda_intel kvm snd_hda_codec arc4 i915 snd_hwdep iwldvm ghash_clmulni_intel aesni_intel snd_pcm aes_x86_64 mac80211 glue_helper snd_page_alloc lrw snd_seq_midi gf128mul parport_pc snd_seq_midi_event uvcvideo i2c_algo_bit ablk_helper ppdev rfcomm bnep snd_rawmidi drm_kms_helper cryptd snd_seq iwlwifi videobuf2_vmalloc drm videobuf2_memops snd_timer snd_seq_device videobuf2_core psmouse microcode videodev btusb snd cfg80211 wmi samsung_laptop soundcore lp bluetooth serio_raw video mac_hid lpc_ich parport hid_generic usbhid hid r8169
[  178.490651] CPU: 0 PID: 8068 Comm: make Not tainted 3.9.0-rc7-next20130419-12-iniza-small #1
[  178.490652] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[  178.490654] task: ffff88000f81c280 ti: ffff88000d606000 task.ti: ffff88000d606000
[  178.490658] RIP: 0010:[<ffffffff812bacd0>]  [<ffffffff812bacd0>] update_queue+0x70/0x210
[  178.490660] RSP: 0018:ffff88000d607d90  EFLAGS: 00010246
[  178.490661] RAX: ffff88008b53ea70 RBX: 0000000000000000 RCX: 0000000000000001
[  178.490662] RDX: ffff88000d607e60 RSI: 00000000ffffffff RDI: ffff88008b53ea18
[  178.490663] RBP: ffff88000d607dd8 R08: ffff88000d607e60 R09: dead000000200200
[  178.490665] R10: dead000000200200 R11: 0000000000000000 R12: ffff88008b53ea18
[  178.490666] R13: 0000000000000001 R14: ffff88008b53ea78 R15: ffffffffffffffd0
[  178.490669] Slab corruption (Not tainted): kmalloc-512 start=ffff88008b53ea00, len=512
[  178.490671] FS:  0000000000000000(0000) GS:ffff88011fa00000(0000) knlGS:0000000000000000
[  178.490673] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  178.490674] CR2: 0000000000000000 CR3: 0000000001c0d000 CR4: 00000000000407f0
[  178.490677] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  178.490678] 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6c 6b 6b 6b 6b 6b  kkkkkkkkkklkkkkk
[  178.490681] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  178.490682] 020: 03 00 00 00 6b 6b 6b 6b 40 a0 3a 10 00 88 ff ff  ....kkkk@.:.....
[  178.490682] Stack:
[  178.490684] Prev obj: start=ffff88008b53e800, len=512
[  178.490686]  0000000000000001 ffff88000d607e60
[  178.490687] 000: 
[  178.490688] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  178.490689]  ffff88008b53ea70
[  178.490690] 010: 
[  178.490691] 00 00 00 00 00 00 00 00 f6 ec a0 03 00 00 00 00  ................
[  178.490692]  ffffffff00000000
[  178.490694] Next obj: start=ffff88008b53ec00, len=512
[  178.490694]  ffff88008b53ea18
[  178.490695] 000: 
[  178.490696] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  178.490697]  0000000000000000
[  178.490698] 010: 
[  178.490699] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  178.490700]  0000000000000001 0000000000000000
[  178.490703]  ffff880010193601 ffff88000d607e28 ffffffff812baf51 ffffffffffffffd5
[  178.490704] Call Trace:
[  178.490710]  [<ffffffff812baf51>] do_smart_update+0xe1/0x140
[  178.490713]  [<ffffffff812bd6e1>] exit_sem+0x2b1/0x350
[  178.490718]  [<ffffffff8105de80>] do_exit+0x290/0xa70
[  178.490721]  [<ffffffff8105e6f4>] do_group_exit+0x44/0xa0
[  178.490724]  [<ffffffff8105e767>] SyS_exit_group+0x17/0x20
[  178.490728]  [<ffffffff816ce15d>] system_call_fastpath+0x1a/0x1f
[  178.490759] Code: 8d 3c 40 49 8d 44 24 58 c7 45 d0 00 00 00 00 49 c1 e7 04 48 89 45 c8 0f 1f 40 00 49 8b 1e 4c 39 f3 0f 84 b4 00 00 00 83 7d d4 ff <4c> 8b 2b 74 1b 49 8b 44 24 58 46 8b 0c 38 45 85 c9 75 0d 44 8b 
[  178.490763] RIP  [<ffffffff812bacd0>] update_queue+0x70/0x210
[  178.490764]  RSP <ffff88000d607d90>
[  178.490765] CR2: 0000000000000000
[  178.500581] ---[ end trace 973df0767eca130f ]---
[  178.500583] Fixing recursive fault but reboot is needed!
[  178.500661] general protection fault: 0000 [#2] SMP 
[  178.500694] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek coretemp joydev kvm_intel snd_hda_intel kvm snd_hda_codec arc4 i915 snd_hwdep iwldvm ghash_clmulni_intel aesni_intel snd_pcm aes_x86_64 mac80211 glue_helper snd_page_alloc lrw snd_seq_midi gf128mul parport_pc snd_seq_midi_event uvcvideo i2c_algo_bit ablk_helper ppdev rfcomm bnep snd_rawmidi drm_kms_helper cryptd snd_seq iwlwifi videobuf2_vmalloc drm videobuf2_memops snd_timer snd_seq_device videobuf2_core psmouse microcode videodev btusb snd cfg80211 wmi samsung_laptop soundcore lp bluetooth serio_raw video mac_hid lpc_ich parport hid_generic usbhid hid r8169
[  178.500697] CPU: 3 PID: 8067 Comm: make Tainted: G      D      3.9.0-rc7-next20130419-12-iniza-small #1
[  178.500698] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[  178.500700] task: ffff8800103aa040 ti: ffff88000d61e000 task.ti: ffff88000d61e000
[  178.500706] RIP: 0010:[<ffffffff8135b577>]  [<ffffffff8135b577>] do_raw_spin_lock+0x17/0x120
[  178.500708] RSP: 0018:ffff88000d61fde8  EFLAGS: 00010286
[  178.500709] RAX: 0000000000000000 RBX: 6b6b6b6b6b6b6b73 RCX: 000000006b6c6b6b
[  178.500710] RDX: 000000006b6b6b6b RSI: ffffffff81a4cced RDI: 6b6b6b6b6b6b6b73
[  178.500711] RBP: ffff88000d61fe18 R08: ffff88002df33d80 R09: 0000000000000000
[  178.500712] R10: 0000000000000001 R11: ffff880010010700 R12: ffff88008b53ea18
[  178.500713] R13: ffff8800103aa040 R14: ffff88002fa84a20 R15: ffff88002fa84a00
[  178.500715] FS:  00002aaaaaae9340(0000) GS:ffff88011fac0000(0000) knlGS:0000000000000000
[  178.500716] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  178.500717] CR2: 00002aaaab1a1be0 CR3: 00000000872ba000 CR4: 00000000000407e0
[  178.500718] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  178.500719] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  178.500720] Stack:
[  178.500723]  0000000000000202 ffff88000d61fe08 0000000000000018 0000000000000001
[  178.500725]  ffff88008b53ea18 ffff8800103aa040 ffff88000d61fe28 ffffffff816c564e
[  178.500728]  ffff88000d61fea8 ffffffff812bd514 ffff8800103aa040 ffff88008d803440
[  178.500728] Call Trace:
[  178.500734]  [<ffffffff816c564e>] _raw_spin_lock+0xe/0x10
[  178.500738]  [<ffffffff812bd514>] exit_sem+0xe4/0x350
[  178.500742]  [<ffffffff8105de80>] do_exit+0x290/0xa70
[  178.500745]  [<ffffffff8105e6f4>] do_group_exit+0x44/0xa0
[  178.500748]  [<ffffffff8105e767>] SyS_exit_group+0x17/0x20
[  178.500751]  [<ffffffff816ce15d>] system_call_fastpath+0x1a/0x1f
[  178.500772] Code: 89 47 08 5d c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 ec 30 48 89 5d e8 4c 89 65 f0 48 89 fb 4c 89 6d f8 <81> 7f 04 ad 4e ad de 75 58 65 48 8b 04 25 80 c7 00 00 48 39 43 
[  178.500774] RIP  [<ffffffff8135b577>] do_raw_spin_lock+0x17/0x120
[  178.500775]  RSP <ffff88000d61fde8>
[  178.500776] ---[ end trace 973df0767eca1310 ]---
[  178.500777] Fixing recursive fault but reboot is needed!
[  178.500880] CPU: 1 PID: 8066 Comm: sh Tainted: G      D      3.9.0-rc7-next20130419-12-iniza-small #1
[  178.500883] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[  178.500886]  ffff88000f81c280 ffff88000d5abd98 ffffffff816bea7b ffff88000d5abdb8
[  178.500893]  ffffffff816beb07 ffff88008b53ea18 ffffffff81a4cced ffff88000d5abdd8
[  178.500898]  ffffffff816beb2d ffff88008b53ea18 ffff88008b53ea18 ffff88000d5abe18
[  178.500903] Call Trace:
[  178.500910]  [<ffffffff816bea7b>] dump_stack+0x19/0x1b
[  178.500936]  [<ffffffff816beb07>] spin_dump+0x8a/0x8f
[  178.500958]  [<ffffffff816beb2d>] spin_bug+0x21/0x26
[  178.500964]  [<ffffffff8135b5e4>] do_raw_spin_lock+0x84/0x120
[  178.500970]  [<ffffffff816c564e>] _raw_spin_lock+0xe/0x10
[  178.500975]  [<ffffffff812bd4e6>] exit_sem+0xb6/0x350
[  178.500980]  [<ffffffff8105de80>] do_exit+0x290/0xa70
[  178.500984]  [<ffffffff8105e6f4>] do_group_exit+0x44/0xa0
[  178.500989]  [<ffffffff8105e767>] SyS_exit_group+0x17/0x20
[  178.500994]  [<ffffffff816ce15d>] system_call_fastpath+0x1a/0x1f
[  178.501801] general protection fault: 0000 [#3] SMP 
[  178.503443] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek coretemp joydev kvm_intel snd_hda_intel kvm snd_hda_codec arc4 i915 snd_hwdep iwldvm ghash_clmulni_intel aesni_intel snd_pcm aes_x86_64 mac80211 glue_helper snd_page_alloc lrw snd_seq_midi gf128mul parport_pc snd_seq_midi_event uvcvideo i2c_algo_bit ablk_helper ppdev rfcomm bnep snd_rawmidi drm_kms_helper cryptd snd_seq iwlwifi videobuf2_vmalloc drm videobuf2_memops snd_timer snd_seq_device videobuf2_core psmouse microcode videodev btusb snd cfg80211 wmi samsung_laptop soundcore lp bluetooth serio_raw video mac_hid lpc_ich parport hid_generic usbhid hid r8169
[  178.510935] CPU: 2 PID: 8066 Comm: sh Tainted: G      D      3.9.0-rc7-next20130419-12-iniza-small #1
[  178.512800] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[  178.514590] task: ffff88001035e700 ti: ffff88000d5aa000 task.ti: ffff88000d5aa000
[  178.516384] RIP: 0010:[<ffffffff8135b577>]  [<ffffffff8135b577>] do_raw_spin_lock+0x17/0x120
[  178.518175] RSP: 0018:ffff88000d5abde8  EFLAGS: 00010286
[  178.519992] RAX: 0000000000000000 RBX: 5a5a5a5a5a5a5a62 RCX: 0000000030313030
[  178.521808] RDX: 0000000030303030 RSI: 0000000000000000 RDI: 5a5a5a5a5a5a5a62
[  178.523688] RBP: ffff88000d5abe18 R08: 66666666663c5b20 R09: 6563363138666666
[  178.527007] R10: 00000000000003ad R11: 3e64353165633631 R12: ffff88008b53ea18
[  178.530343] R13: ffff88001035e700 R14: ffff880010227d60 R15: ffff880010227d40
[  178.533279] FS:  00002aaaaaae8600(0000) GS:ffff88011fa80000(0000) knlGS:0000000000000000
[  178.536646] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  178.540019] CR2: 0000000000fc4000 CR3: 000000008d03f000 CR4: 00000000000407e0
[  178.543392] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  178.546747] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  178.550125] Stack:
[  178.553537]  ffffffffffffffd5 0000000000000004 ffffffff81c7a608 0000000000000001
[  178.556966]  ffff88008b53ea18 ffff88001035e700 ffff88000d5abe28 ffffffff816c564e
[  178.560468]  ffff88000d5abea8 ffffffff812bd514 ffff88001035e700 ffff8800170e7400
[  178.563972] Call Trace:
[  178.567456]  [<ffffffff816c564e>] _raw_spin_lock+0xe/0x10
[  178.570992]  [<ffffffff812bd514>] exit_sem+0xe4/0x350
[  178.574561]  [<ffffffff8105de80>] do_exit+0x290/0xa70
[  178.578110]  [<ffffffff8105e6f4>] do_group_exit+0x44/0xa0
[  178.581678]  [<ffffffff8105e767>] SyS_exit_group+0x17/0x20
[  178.585255]  [<ffffffff816ce15d>] system_call_fastpath+0x1a/0x1f
[  178.588827] Code: 89 47 08 5d c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 ec 30 48 89 5d e8 4c 89 65 f0 48 89 fb 4c 89 6d f8 <81> 7f 04 ad 4e ad de 75 58 65 48 8b 04 25 80 c7 00 00 48 39 43 
[  178.596694] RIP  [<ffffffff8135b577>] do_raw_spin_lock+0x17/0x120
[  178.600571]  RSP <ffff88000d5abde8>
[  178.604447] ---[ end trace 973df0767eca1311 ]---
[  178.604452] Fixing recursive fault but reboot is needed!
[  178.652108] cfg80211: Calling CRDA to update world regulatory domain
[  178.664147] cfg80211: World regulatory domain updated:
[  178.664158] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  178.664164] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  178.664169] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  178.664173] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  178.664177] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  178.664182] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  181.811782] wlan0: authenticate with 00:04:0e:e4:00:3d
[  181.814864] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[  181.816966] wlan0: authenticated
[  181.817289] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[  181.817299] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  181.819632] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[  181.823321] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[  181.830131] wlan0: associated

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
  2013-04-20  0:19                                 ` Sedat Dilek
@ 2013-04-20 12:46                                   ` Sedat Dilek
  2013-04-20 15:59                                     ` Rik van Riel
  2013-04-20 20:00                                   ` Davidlohr Bueso
  1 sibling, 1 reply; 21+ messages in thread
From: Sedat Dilek @ 2013-04-20 12:46 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Davidlohr Bueso, Rik van Riel, Daniel Vetter, Stephen Rothwell,
	linux-next, Linux Kernel Mailing List, the arch/x86 maintainers,
	Ingo Molnar, Thomas Gleixner, Paul McKenney, Paul McKenney, DRI,
	Dave Airlie, Emmanuel Benisty

On Sat, Apr 20, 2013 at 2:19 AM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> On Sat, Apr 20, 2013 at 2:06 AM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>> On Sat, Apr 20, 2013 at 1:02 AM, Linus Torvalds
>> <torvalds@linux-foundation.org> wrote:
>>> On Fri, Apr 19, 2013 at 3:55 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>>>>
>>>> Davidlohr pointed to this patch (tested the triplet):
>>>>
>>>> ipc, sem: do not call sem_lock when bogus sma:
>>>> https://lkml.org/lkml/2013/3/31/12
>>>>
>>>> Is that what you mean?
>>>
>>> Yup.
>>>
>>
>> Davidlohr Bueso (1):
>>       ipc, sem: do not call sem_lock when bogus sma
>>
>> Linus Torvalds (1):
>>       crazy rcu double free debug hack
>>
>> With ***both*** patches applied I am able to build a Linux-kernel with
>> 4 parallel-make-jobs again.
>> David's or your patch alone are not sufficient!
>>
>
> [ Still both patches applied ]
>
> To correct myself... The 1st run was OK.
>
> The 2nd run shows a NULL-pointer-deref (excerpt):
>
> [  178.490583] BUG: spinlock bad magic on CPU#1, sh/8066
> [  178.490595]  lock: 0xffff88008b53ea18, .magic: 6b6b6b6b, .owner:
> make/8068, .owner_cpu: 3
> [  178.490599] BUG: unable to handle kernel NULL pointer dereference
> at           (null)
> [  178.490608] IP: [<ffffffff812bacd0>] update_queue+0x70/0x210
> [  178.490610] PGD 0
> [  178.490612] Oops: 0000 [#1] SMP
> ...
>
> See attached full dmesg!
>
> Hope this helps.
>
> - Sedat -
>
>
>> - Sedat -
>>
>>>     Linus

I have started a new thread "[next-20130419] ipc: sem: BROKEN", please
use this one!

Thanks for all your feedback!

- Sedat -

[1] http://marc.info/?l=linux-next&m=136646172915261&w=2

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
  2013-04-20 12:46                                   ` Sedat Dilek
@ 2013-04-20 15:59                                     ` Rik van Riel
  2013-04-20 17:04                                       ` Sedat Dilek
  0 siblings, 1 reply; 21+ messages in thread
From: Rik van Riel @ 2013-04-20 15:59 UTC (permalink / raw)
  To: sedat.dilek
  Cc: Linus Torvalds, Davidlohr Bueso, Daniel Vetter, Stephen Rothwell,
	linux-next, Linux Kernel Mailing List, the arch/x86 maintainers,
	Ingo Molnar, Thomas Gleixner, Paul McKenney, Paul McKenney, DRI,
	Dave Airlie, Emmanuel Benisty

On 04/20/2013 08:46 AM, Sedat Dilek wrote:

> I have started a new thread "[next-20130419] ipc: sem: BROKEN", please
> use this one!
>
> Thanks for all your feedback!
>
> - Sedat -
>
> [1] http://marc.info/?l=linux-next&m=136646172915261&w=2

I suspect most of us are not subscribed to the linux-next mailing list.
I know I'm not.

If you need someone on some email thread, you need to CC them on the
email.

-- 
All rights reversed.

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
  2013-04-20 15:59                                     ` Rik van Riel
@ 2013-04-20 17:04                                       ` Sedat Dilek
  0 siblings, 0 replies; 21+ messages in thread
From: Sedat Dilek @ 2013-04-20 17:04 UTC (permalink / raw)
  To: Rik van Riel
  Cc: Linus Torvalds, Davidlohr Bueso, Daniel Vetter, Stephen Rothwell,
	linux-next, Linux Kernel Mailing List, the arch/x86 maintainers,
	Ingo Molnar, Thomas Gleixner, Paul McKenney, Paul McKenney, DRI,
	Dave Airlie, Emmanuel Benisty

On Sat, Apr 20, 2013 at 5:59 PM, Rik van Riel <riel@surriel.com> wrote:
> On 04/20/2013 08:46 AM, Sedat Dilek wrote:
>
>> I have started a new thread "[next-20130419] ipc: sem: BROKEN", please
>> use this one!
>>
>> Thanks for all your feedback!
>>
>> - Sedat -
>>
>> [1] http://marc.info/?l=linux-next&m=136646172915261&w=2
>
>
> I suspect most of us are not subscribed to the linux-next mailing list.
> I know I'm not.
>
> If you need someone on some email thread, you need to CC them on the
> email.
>

I dropped some irrelevant CCs from here in the new thread (as I did
not know from what the root-cause was).

LKML, linux-next, linux-mm MLs should be OK or am I missing someone or
another ML?

- Sedat -

> --
> All rights reversed.

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
  2013-04-20  0:19                                 ` Sedat Dilek
  2013-04-20 12:46                                   ` Sedat Dilek
@ 2013-04-20 20:00                                   ` Davidlohr Bueso
  2013-04-20 21:03                                     ` Sedat Dilek
  1 sibling, 1 reply; 21+ messages in thread
From: Davidlohr Bueso @ 2013-04-20 20:00 UTC (permalink / raw)
  To: sedat.dilek
  Cc: Linus Torvalds, Rik van Riel, Daniel Vetter, Stephen Rothwell,
	linux-next, Linux Kernel Mailing List, the arch/x86 maintainers,
	Ingo Molnar, Thomas Gleixner, Paul McKenney, Paul McKenney, DRI,
	Dave Airlie, Emmanuel Benisty

[-- Attachment #1: Type: text/plain, Size: 1994 bytes --]

On Sat, 2013-04-20 at 02:19 +0200, Sedat Dilek wrote:
> On Sat, Apr 20, 2013 at 2:06 AM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> > On Sat, Apr 20, 2013 at 1:02 AM, Linus Torvalds
> > <torvalds@linux-foundation.org> wrote:
> >> On Fri, Apr 19, 2013 at 3:55 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> >>>
> >>> Davidlohr pointed to this patch (tested the triplet):
> >>>
> >>> ipc, sem: do not call sem_lock when bogus sma:
> >>> https://lkml.org/lkml/2013/3/31/12
> >>>
> >>> Is that what you mean?
> >>
> >> Yup.
> >>
> >
> > Davidlohr Bueso (1):
> >       ipc, sem: do not call sem_lock when bogus sma
> >
> > Linus Torvalds (1):
> >       crazy rcu double free debug hack
> >
> > With ***both*** patches applied I am able to build a Linux-kernel with
> > 4 parallel-make-jobs again.
> > David's or your patch alone are not sufficient!
> >
> 
> [ Still both patches applied ]
> 
> To correct myself... The 1st run was OK.
> 
> The 2nd run shows a NULL-pointer-deref (excerpt):
> 
> [  178.490583] BUG: spinlock bad magic on CPU#1, sh/8066
> [  178.490595]  lock: 0xffff88008b53ea18, .magic: 6b6b6b6b, .owner:
> make/8068, .owner_cpu: 3
> [  178.490599] BUG: unable to handle kernel NULL pointer dereference
> at           (null)
> [  178.490608] IP: [<ffffffff812bacd0>] update_queue+0x70/0x210
> [  178.490610] PGD 0
> [  178.490612] Oops: 0000 [#1] SMP
> ...

The exit_sem() >> do_smart_update() >> update_queue() calls seem pretty
well protected. Furthermore we're asserting that sma->sem_perm.lock is
taken. This could just be a consequence of another issue. Earlier this
week Andrew pointed out a potential race in semctl_main() where
sma->sem_perm.deleted could be changed when cmd == GETALL.

Sedat, could you try the attached patch to keep the ipc lock acquired
(on top of the three patches you're already using) and let us know how
it goes? We could also just have the RCU read lock instead of
->sem.perm.lock for GETALL, but lets play it safe for now.

Thanks,
Davidlohr


[-- Attachment #2: ipc-fix.patch --]
[-- Type: text/x-patch, Size: 506 bytes --]

diff --git a/ipc/sem.c b/ipc/sem.c
index 5711616..1dfc3c1 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -1243,10 +1243,11 @@ static int semctl_main(struct ipc_namespace *ns, int semid, int semnum,
 				err = -EIDRM;
 				goto out_free;
 			}
-			sem_unlock(sma, -1);
 		}
 
-		sem_lock(sma, NULL, -1);
+		/* has the ipc lock already been taken? */
+		if(nsems <= SEMMSL_FAST)
+			sem_lock(sma, NULL, -1);
 		for (i = 0; i < sma->sem_nsems; i++)
 			sem_io[i] = sma->sem_base[i].semval;
 		sem_unlock(sma, -1);

^ permalink raw reply	[flat|nested] 21+ messages in thread

* Re: linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ]
  2013-04-20 20:00                                   ` Davidlohr Bueso
@ 2013-04-20 21:03                                     ` Sedat Dilek
  0 siblings, 0 replies; 21+ messages in thread
From: Sedat Dilek @ 2013-04-20 21:03 UTC (permalink / raw)
  To: Davidlohr Bueso
  Cc: Linus Torvalds, Rik van Riel, Daniel Vetter, Stephen Rothwell,
	linux-next, Linux Kernel Mailing List, the arch/x86 maintainers,
	Ingo Molnar, Thomas Gleixner, Paul McKenney, Paul McKenney, DRI,
	Dave Airlie, Emmanuel Benisty

[-- Attachment #1: Type: text/plain, Size: 2367 bytes --]

On Sat, Apr 20, 2013 at 10:00 PM, Davidlohr Bueso
<davidlohr.bueso@hp.com> wrote:
> On Sat, 2013-04-20 at 02:19 +0200, Sedat Dilek wrote:
>> On Sat, Apr 20, 2013 at 2:06 AM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>> > On Sat, Apr 20, 2013 at 1:02 AM, Linus Torvalds
>> > <torvalds@linux-foundation.org> wrote:
>> >> On Fri, Apr 19, 2013 at 3:55 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
>> >>>
>> >>> Davidlohr pointed to this patch (tested the triplet):
>> >>>
>> >>> ipc, sem: do not call sem_lock when bogus sma:
>> >>> https://lkml.org/lkml/2013/3/31/12
>> >>>
>> >>> Is that what you mean?
>> >>
>> >> Yup.
>> >>
>> >
>> > Davidlohr Bueso (1):
>> >       ipc, sem: do not call sem_lock when bogus sma
>> >
>> > Linus Torvalds (1):
>> >       crazy rcu double free debug hack
>> >
>> > With ***both*** patches applied I am able to build a Linux-kernel with
>> > 4 parallel-make-jobs again.
>> > David's or your patch alone are not sufficient!
>> >
>>
>> [ Still both patches applied ]
>>
>> To correct myself... The 1st run was OK.
>>
>> The 2nd run shows a NULL-pointer-deref (excerpt):
>>
>> [  178.490583] BUG: spinlock bad magic on CPU#1, sh/8066
>> [  178.490595]  lock: 0xffff88008b53ea18, .magic: 6b6b6b6b, .owner:
>> make/8068, .owner_cpu: 3
>> [  178.490599] BUG: unable to handle kernel NULL pointer dereference
>> at           (null)
>> [  178.490608] IP: [<ffffffff812bacd0>] update_queue+0x70/0x210
>> [  178.490610] PGD 0
>> [  178.490612] Oops: 0000 [#1] SMP
>> ...
>
> The exit_sem() >> do_smart_update() >> update_queue() calls seem pretty
> well protected. Furthermore we're asserting that sma->sem_perm.lock is
> taken. This could just be a consequence of another issue. Earlier this
> week Andrew pointed out a potential race in semctl_main() where
> sma->sem_perm.deleted could be changed when cmd == GETALL.
>
> Sedat, could you try the attached patch to keep the ipc lock acquired
> (on top of the three patches you're already using) and let us know how
> it goes? We could also just have the RCU read lock instead of
> ->sem.perm.lock for GETALL, but lets play it safe for now.
>

I had to refresh your patch and it contain strange ^M charachters as well.

NOPE, the machine gets FROZEN (cold reboot).

- Sedat -

P.S.: I have attached all 4 patches against next-20130419 in case
someone wants to follow.

> Thanks,
> Davidlohr
>

[-- Attachment #2: 0001-ipc-sem-untangle-RCU-locking-with-find_alloc_undo.patch --]
[-- Type: application/octet-stream, Size: 3214 bytes --]

From f910ae3e78e8e672d19e5c952b23a58dc3c357b9 Mon Sep 17 00:00:00 2001
From: Rik van Riel <riel@surriel.com>
Date: Thu, 28 Mar 2013 15:32:22 +0000
Subject: [PATCH 1/4] ipc,sem: untangle RCU locking with find_alloc_undo

On Tue, 26 Mar 2013 13:33:07 -0400
Sasha Levin <sasha.levin@oracle.com> wrote:

> [   96.347341] ================================================
> [   96.348085] [ BUG: lock held when returning to user space! ]
> [   96.348834] 3.9.0-rc4-next-20130326-sasha-00011-gbcb2313 #318 Tainted: G        W
> [   96.360300] ------------------------------------------------
> [   96.361084] trinity-child9/7583 is leaving the kernel with locks still held!
> [   96.362019] 1 lock held by trinity-child9/7583:
> [   96.362610]  #0:  (rcu_read_lock){.+.+..}, at: [<ffffffff8192eafb>] SYSC_semtimedop+0x1fb/0xec0
>
> It seems that we can leave semtimedop without releasing the rcu read lock.

Sasha, this patch untangles the RCU locking with find_alloc_undo,
and should fix the above issue. As a side benefit, this makes the
code a little cleaner.

Next up: implement locking in a way that does not trigger any
lockdep warnings...

---8<---

Subject: ipc,sem: untangle RCU locking with find_alloc_undo

The ipc semaphore code has a nasty RCU locking tangle, with both
find_alloc_undo and semtimedop taking the rcu_read_lock(). The
code can be cleaned up somewhat by only taking the rcu_read_lock
once.

The only caller of find_alloc_undo is in semtimedop.

This should solve the trinity issue reported by Sasha Levin.

Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
---
 ipc/sem.c | 31 +++++++++----------------------
 1 file changed, 9 insertions(+), 22 deletions(-)

diff --git a/ipc/sem.c b/ipc/sem.c
index 5711616..4c578ab 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -1650,22 +1650,23 @@ SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
 			alter = 1;
 	}
 
+	INIT_LIST_HEAD(&tasks);
+
 	if (undos) {
+		/* On success, find_alloc_undo takes the rcu_read_lock */
 		un = find_alloc_undo(ns, semid);
 		if (IS_ERR(un)) {
 			error = PTR_ERR(un);
 			goto out_free;
 		}
-	} else
+	} else {
 		un = NULL;
+		rcu_read_lock();
+	}
 
-	INIT_LIST_HEAD(&tasks);
-
-	rcu_read_lock();
 	sma = sem_obtain_object_check(ns, semid);
 	if (IS_ERR(sma)) {
-		if (un)
-			rcu_read_unlock();
+		rcu_read_unlock();
 		error = PTR_ERR(sma);
 		goto out_free;
 	}
@@ -1697,22 +1698,8 @@ SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
 	 */
 	error = -EIDRM;
 	locknum = sem_lock(sma, sops, nsops);
-	if (un) {
-		if (un->semid == -1) {
-			rcu_read_unlock();
-			goto out_unlock_free;
-		} else {
-			/*
-			 * rcu lock can be released, "un" cannot disappear:
-			 * - sem_lock is acquired, thus IPC_RMID is
-			 *   impossible.
-			 * - exit_sem is impossible, it always operates on
-			 *   current (or a dead task).
-			 */
-
-			rcu_read_unlock();
-		}
-	}
+	if (un && un->semid == -1)
+		goto out_unlock_free;
 
 	error = try_atomic_semop (sma, sops, nsops, un, task_tgid_vnr(current));
 	if (error <= 0) {
-- 
1.8.2.1


[-- Attachment #3: 0002-ipc-sem-fix-lockdep-false-positive.patch --]
[-- Type: application/octet-stream, Size: 4734 bytes --]

From 88940d2b99b2c27fcccb21c9931b62ec7441c531 Mon Sep 17 00:00:00 2001
From: Rik van Riel <riel@surriel.com>
Date: Fri, 29 Mar 2013 13:55:58 +0000
Subject: [PATCH 2/4] ipc,sem: fix lockdep false positive

On Thu, 28 Mar 2013 19:50:47 -0700
Michel Lespinasse <walken@google.com> wrote:

> This is IMO where the spin_unlock_wait(&sma->sem_perm.lock) would
> belong - right before the goto again.

Here is the slightly more optimistic (and probably more readable)
version of the patch:

---8<---
Unfortunately the locking scheme originally proposed has false positives
with lockdep.  This can be fixed by changing the code to only ever take
one lock, and making sure that other relevant locks are not locked, before
entering a critical section.

For the "global lock" case, this is done by taking the sem_array lock,
and then (potentially) waiting for all the semaphore's spinlocks to be
unlocked.

For the "local lock" case, we wait on the sem_array's lock to be free,
before taking the semaphore local lock. To prevent races, we need to
check again after we have taken the local lock.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
---
 ipc/sem.c | 46 +++++++++++++++++++++++++++++++---------------
 1 file changed, 31 insertions(+), 15 deletions(-)

diff --git a/ipc/sem.c b/ipc/sem.c
index 4c578ab..926c4b7 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -320,21 +320,26 @@ void __init sem_init (void)
 }
 
 /*
- * If the sem_array contains just one semaphore, or if multiple
- * semops are performed in one syscall, or if there are complex
- * operations pending, the whole sem_array is locked.
- * If one semop is performed on an array with multiple semaphores,
- * get a shared lock on the array, and lock the individual semaphore.
+ * If the request contains only one semaphore operation, and there are
+ * no complex transactions pending, lock only the semaphore involved.
+ * Otherwise, lock the entire semaphore array, since we either have
+ * multiple semaphores in our own semops, or we need to look at
+ * semaphores from other pending complex operations.
  *
  * Carefully guard against sma->complex_count changing between zero
  * and non-zero while we are spinning for the lock. The value of
  * sma->complex_count cannot change while we are holding the lock,
  * so sem_unlock should be fine.
+ *
+ * The global lock path checks that all the local locks have been released,
+ * checking each local lock once. This means that the local lock paths
+ * cannot start their critical sections while the global lock is held.
  */
 static inline int sem_lock(struct sem_array *sma, struct sembuf *sops,
 			      int nsops)
 {
 	int locknum;
+ again:
 	if (nsops == 1 && !sma->complex_count) {
 		struct sem *sem = sma->sem_base + sops->sem_num;
 
@@ -347,17 +352,34 @@ static inline int sem_lock(struct sem_array *sma, struct sembuf *sops,
 		 */
 		if (unlikely(sma->complex_count)) {
 			spin_unlock(&sem->lock);
-			goto lock_all;
+			goto lock_array;
+		}
+
+		/*
+		 * Another process is holding the global lock on the
+		 * sem_array; we cannot enter our critical section,
+		 * but have to wait for the global lock to be released.
+		 */
+		if (unlikely(spin_is_locked(&sma->sem_perm.lock))) {
+			spin_unlock(&sem->lock);
+			spin_unlock_wait(&sma->sem_perm.lock);
+			goto again;
 		}
+
 		locknum = sops->sem_num;
 	} else {
 		int i;
-		/* Lock the sem_array, and all the semaphore locks */
- lock_all:
+		/*
+		 * Lock the semaphore array, and wait for all of the
+		 * individual semaphore locks to go away.  The code
+		 * above ensures no new single-lock holders will enter
+		 * their critical section while the array lock is held.
+		 */
+ lock_array:
 		spin_lock(&sma->sem_perm.lock);
 		for (i = 0; i < sma->sem_nsems; i++) {
 			struct sem *sem = sma->sem_base + i;
-			spin_lock(&sem->lock);
+			spin_unlock_wait(&sem->lock);
 		}
 		locknum = -1;
 	}
@@ -367,11 +389,6 @@ static inline int sem_lock(struct sem_array *sma, struct sembuf *sops,
 static inline void sem_unlock(struct sem_array *sma, int locknum)
 {
 	if (locknum == -1) {
-		int i;
-		for (i = 0; i < sma->sem_nsems; i++) {
-			struct sem *sem = sma->sem_base + i;
-			spin_unlock(&sem->lock);
-		}
 		spin_unlock(&sma->sem_perm.lock);
 	} else {
 		struct sem *sem = sma->sem_base + locknum;
@@ -559,7 +576,6 @@ static int newary(struct ipc_namespace *ns, struct ipc_params *params)
 	for (i = 0; i < nsems; i++) {
 		INIT_LIST_HEAD(&sma->sem_base[i].sem_pending);
 		spin_lock_init(&sma->sem_base[i].lock);
-		spin_lock(&sma->sem_base[i].lock);
 	}
 
 	sma->complex_count = 0;
-- 
1.8.2.1


[-- Attachment #4: 0003-ipc-sem-do-not-call-sem_lock-when-bogus-sma.patch --]
[-- Type: application/octet-stream, Size: 1442 bytes --]

From 8512d645e6ba37e6b00320617b8879c502e5eb31 Mon Sep 17 00:00:00 2001
From: Davidlohr Bueso <davidlohr.bueso@hp.com>
Date: Fri, 19 Apr 2013 22:34:19 +0200
Subject: [PATCH 3/4] ipc, sem: do not call sem_lock when bogus sma

In exit_sem() we attempt to acquire the sma->sem_perm.lock by calling
sem_lock() immediately after obtaining sma. However, if sma isn't valid,
then calling sem_lock() will tend to do bad things.

Move the sma error check right after the sem_obtain_object_check() call instead.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
---
 ipc/sem.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/ipc/sem.c b/ipc/sem.c
index 926c4b7..acada9f 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -1872,8 +1872,7 @@ void exit_sem(struct task_struct *tsk)
 		struct sem_array *sma;
 		struct sem_undo *un;
 		struct list_head tasks;
-		int semid;
-		int i;
+		int semid, i;
 
 		rcu_read_lock();
 		un = list_entry_rcu(ulp->list_proc.next,
@@ -1889,12 +1888,13 @@ void exit_sem(struct task_struct *tsk)
 		}
 
 		sma = sem_obtain_object_check(tsk->nsproxy->ipc_ns, un->semid);
-		sem_lock(sma, NULL, -1);
-
 		/* exit_sem raced with IPC_RMID, nothing to do */
-		if (IS_ERR(sma))
+		if (IS_ERR(sma)) {
+			rcu_read_unlock();
 			continue;
+		}
 
+		sem_lock(sma, NULL, -1);
 		un = __lookup_undo(ulp, semid);
 		if (un == NULL) {
 			/* exit_sem raced with IPC_RMID+semget() that created
-- 
1.8.2.1


[-- Attachment #5: 0004-ipc-sem-check-if-the-ipc-lock-has-been-already-taken.patch --]
[-- Type: application/octet-stream, Size: 1101 bytes --]

From 84fbf1da01badb1a563597f23358a8c8bf77bff6 Mon Sep 17 00:00:00 2001
From: Davidlohr Bueso <davidlohr.bueso@hp.com>
Date: Sat, 20 Apr 2013 22:30:00 +0200
Subject: [PATCH 4/4] ipc, sem: check if the ipc lock has been already taken

Original patch from [1].

[ dileks: ChangeLog v1->v2:
  - Refreshed against next-20130419 plus 3 ipc-sem-next patches from [2]
  - Beautify comment and if-statement
]

[1] http://marc.info/?t=136631457900005&r=1&w=2
[2] http://marc.info/?l=linux-next&m=136640233601913&w=2
---
 ipc/sem.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/ipc/sem.c b/ipc/sem.c
index acada9f..c1dfbfb 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -1259,10 +1259,11 @@ static int semctl_main(struct ipc_namespace *ns, int semid, int semnum,
 				err = -EIDRM;
 				goto out_free;
 			}
-			sem_unlock(sma, -1);
 		}
 
-		sem_lock(sma, NULL, -1);
+		/* Has the ipc lock already been taken? */
+		if (nsems <= SEMMSL_FAST)
+			sem_lock(sma, NULL, -1);
 		for (i = 0; i < sma->sem_nsems; i++)
 			sem_io[i] = sma->sem_base[i].semval;
 		sem_unlock(sma, -1);
-- 
1.8.2.1


^ permalink raw reply	[flat|nested] 21+ messages in thread

end of thread, other threads:[~2013-04-20 21:03 UTC | newest]

Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <CA+icZUVWC+Rgd9wh4Z4CPZkEa9Pm2=2udnY5=UD1nnH0Wot1pQ@mail.gmail.com>
2013-04-18 19:48 ` linux-next: Tree for Apr 18 [ call-trace: drm | x86 | smp | rcu related? ] Daniel Vetter
2013-04-18 21:59   ` Sedat Dilek
2013-04-19 10:19     ` Sedat Dilek
     [not found]       ` <CA+icZUXjTGSG+tejOAFgXr8EpKd7dL=-W41ha_-0N=roAxN3eg@mail.gmail.com>
2013-04-19 16:43         ` Sedat Dilek
2013-04-19 18:53           ` Sedat Dilek
2013-04-19 19:19             ` Rik van Riel
2013-04-19 20:12               ` Davidlohr Bueso
     [not found]                 ` <CA+icZUVjx7pDJWo3tGxX3ANXtiTP0_Q1YyOowANhn1wzcSgWaA@mail.gmail.com>
2013-04-19 21:24                   ` Linus Torvalds
2013-04-19 21:39                     ` Paul E. McKenney
2013-04-19 22:12                     ` Sedat Dilek
2013-04-19 22:34                       ` Sedat Dilek
2013-04-19 22:50                         ` Linus Torvalds
2013-04-19 22:55                           ` Sedat Dilek
2013-04-19 23:02                             ` Linus Torvalds
2013-04-20  0:06                               ` Sedat Dilek
2013-04-20  0:19                                 ` Sedat Dilek
2013-04-20 12:46                                   ` Sedat Dilek
2013-04-20 15:59                                     ` Rik van Riel
2013-04-20 17:04                                       ` Sedat Dilek
2013-04-20 20:00                                   ` Davidlohr Bueso
2013-04-20 21:03                                     ` Sedat Dilek

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).