From: Jim Rees <rees@umich.edu>
To: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: linux-nfs@vger.kernel.org, peter honeyman <honey@citi.umich.edu>
Subject: [PATCH v2 03/25] NFS41: Let layoutcommit handle multiple segments
Date: Thu, 21 Jul 2011 15:34:03 -0400 [thread overview]
Message-ID: <1311276865-29484-4-git-send-email-rees@umich.edu> (raw)
In-Reply-To: <1311276865-29484-1-git-send-email-rees@umich.edu>
From: Peng Tao <bergwolf@gmail.com>
Some layout drivers like block will have multiple segments. Generic code
should be able to handle it. Layoutcommit takes a list of segments and last
write offset is saved at inode level.
Signed-off-by: Peng Tao <peng_tao@emc.com>
---
fs/nfs/nfs4filelayout.c | 2 +-
fs/nfs/nfs4proc.c | 8 ++++++-
fs/nfs/pnfs.c | 50 ++++++++++++++++++++++++----------------------
fs/nfs/pnfs.h | 5 +++-
include/linux/nfs_xdr.h | 2 +-
5 files changed, 39 insertions(+), 28 deletions(-)
diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c
index be93a62..e8915d4 100644
--- a/fs/nfs/nfs4filelayout.c
+++ b/fs/nfs/nfs4filelayout.c
@@ -170,7 +170,7 @@ filelayout_set_layoutcommit(struct nfs_write_data *wdata)
pnfs_set_layoutcommit(wdata);
dprintk("%s ionde %lu pls_end_pos %lu\n", __func__, wdata->inode->i_ino,
- (unsigned long) wdata->lseg->pls_end_pos);
+ (unsigned long) NFS_I(wdata->inode)->layout->plh_lwb);
}
/*
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 8ceda46..784c1a2 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -5962,9 +5962,15 @@ nfs4_layoutcommit_done(struct rpc_task *task, void *calldata)
static void nfs4_layoutcommit_release(void *calldata)
{
struct nfs4_layoutcommit_data *data = calldata;
+ struct pnfs_layout_segment *lseg, *tmp;
/* Matched by references in pnfs_set_layoutcommit */
- put_lseg(data->lseg);
+ list_for_each_entry_safe(lseg, tmp, &data->lseg_list, pls_lc_list) {
+ list_del_init(&lseg->pls_lc_list);
+ if (test_and_clear_bit(NFS_LSEG_LAYOUTCOMMIT,
+ &lseg->pls_flags))
+ put_lseg(lseg);
+ }
put_rpccred(data->cred);
kfree(data);
}
diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index 8e72724..dae19dd 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -236,6 +236,7 @@ static void
init_lseg(struct pnfs_layout_hdr *lo, struct pnfs_layout_segment *lseg)
{
INIT_LIST_HEAD(&lseg->pls_list);
+ INIT_LIST_HEAD(&lseg->pls_lc_list);
atomic_set(&lseg->pls_refcount, 1);
smp_mb();
set_bit(NFS_LSEG_VALID, &lseg->pls_flags);
@@ -1362,16 +1363,17 @@ pnfs_generic_pg_readpages(struct nfs_pageio_descriptor *desc)
EXPORT_SYMBOL_GPL(pnfs_generic_pg_readpages);
/*
- * Currently there is only one (whole file) write lseg.
+ * There can be multiple RW segments.
*/
-static struct pnfs_layout_segment *pnfs_list_write_lseg(struct inode *inode)
+static void pnfs_list_write_lseg(struct inode *inode, struct list_head *listp)
{
- struct pnfs_layout_segment *lseg, *rv = NULL;
+ struct pnfs_layout_segment *lseg;
- list_for_each_entry(lseg, &NFS_I(inode)->layout->plh_segs, pls_list)
- if (lseg->pls_range.iomode == IOMODE_RW)
- rv = lseg;
- return rv;
+ list_for_each_entry(lseg, &NFS_I(inode)->layout->plh_segs, pls_list) {
+ if (lseg->pls_range.iomode == IOMODE_RW &&
+ test_bit(NFS_LSEG_LAYOUTCOMMIT, &lseg->pls_flags))
+ list_add(&lseg->pls_lc_list, listp);
+ }
}
void
@@ -1383,17 +1385,21 @@ pnfs_set_layoutcommit(struct nfs_write_data *wdata)
spin_lock(&nfsi->vfs_inode.i_lock);
if (!test_and_set_bit(NFS_INO_LAYOUTCOMMIT, &nfsi->flags)) {
- /* references matched in nfs4_layoutcommit_release */
- get_lseg(wdata->lseg);
- wdata->lseg->pls_lc_cred =
- get_rpccred(wdata->args.context->state->owner->so_cred);
mark_as_dirty = true;
+ nfsi->layout->plh_lc_cred =
+ get_rpccred(wdata->args.context->state->owner->so_cred);
dprintk("%s: Set layoutcommit for inode %lu ",
__func__, wdata->inode->i_ino);
}
- if (end_pos > wdata->lseg->pls_end_pos)
- wdata->lseg->pls_end_pos = end_pos;
+ if (!test_and_set_bit(NFS_LSEG_LAYOUTCOMMIT, &wdata->lseg->pls_flags)) {
+ /* references matched in nfs4_layoutcommit_release */
+ get_lseg(wdata->lseg);
+ }
+ if (end_pos > nfsi->layout->plh_lwb)
+ nfsi->layout->plh_lwb = end_pos;
spin_unlock(&nfsi->vfs_inode.i_lock);
+ dprintk("%s: lseg %p end_pos %llu\n",
+ __func__, wdata->lseg, nfsi->layout->plh_lwb);
/* if pnfs_layoutcommit_inode() runs between inode locks, the next one
* will be a noop because NFS_INO_LAYOUTCOMMIT will not be set */
@@ -1415,7 +1421,6 @@ pnfs_layoutcommit_inode(struct inode *inode, bool sync)
{
struct nfs4_layoutcommit_data *data;
struct nfs_inode *nfsi = NFS_I(inode);
- struct pnfs_layout_segment *lseg;
struct rpc_cred *cred;
loff_t end_pos;
int status = 0;
@@ -1433,29 +1438,26 @@ pnfs_layoutcommit_inode(struct inode *inode, bool sync)
goto out;
}
+ INIT_LIST_HEAD(&data->lseg_list);
spin_lock(&inode->i_lock);
if (!test_and_clear_bit(NFS_INO_LAYOUTCOMMIT, &nfsi->flags)) {
spin_unlock(&inode->i_lock);
kfree(data);
goto out;
}
- /*
- * Currently only one (whole file) write lseg which is referenced
- * in pnfs_set_layoutcommit and will be found.
- */
- lseg = pnfs_list_write_lseg(inode);
- end_pos = lseg->pls_end_pos;
- cred = lseg->pls_lc_cred;
- lseg->pls_end_pos = 0;
- lseg->pls_lc_cred = NULL;
+ pnfs_list_write_lseg(inode, &data->lseg_list);
+
+ end_pos = nfsi->layout->plh_lwb;
+ cred = nfsi->layout->plh_lc_cred;
+ nfsi->layout->plh_lwb = 0;
+ nfsi->layout->plh_lc_cred = NULL;
memcpy(&data->args.stateid.data, nfsi->layout->plh_stateid.data,
sizeof(nfsi->layout->plh_stateid.data));
spin_unlock(&inode->i_lock);
data->args.inode = inode;
- data->lseg = lseg;
data->cred = cred;
nfs_fattr_init(&data->fattr);
data->args.bitmask = NFS_SERVER(inode)->cache_consistency_bitmask;
diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h
index 23d8267..5f1b532 100644
--- a/fs/nfs/pnfs.h
+++ b/fs/nfs/pnfs.h
@@ -36,16 +36,17 @@
enum {
NFS_LSEG_VALID = 0, /* cleared when lseg is recalled/returned */
NFS_LSEG_ROC, /* roc bit received from server */
+ NFS_LSEG_LAYOUTCOMMIT, /* layoutcommit bit set for layoutcommit */
};
struct pnfs_layout_segment {
struct list_head pls_list;
+ struct list_head pls_lc_list;
struct pnfs_layout_range pls_range;
atomic_t pls_refcount;
unsigned long pls_flags;
struct pnfs_layout_hdr *pls_layout;
struct rpc_cred *pls_lc_cred; /* LAYOUTCOMMIT credential */
- loff_t pls_end_pos; /* LAYOUTCOMMIT write end */
};
enum pnfs_try_status {
@@ -128,6 +129,8 @@ struct pnfs_layout_hdr {
unsigned long plh_block_lgets; /* block LAYOUTGET if >0 */
u32 plh_barrier; /* ignore lower seqids */
unsigned long plh_flags;
+ loff_t plh_lwb; /* last write byte for layoutcommit */
+ struct rpc_cred *plh_lc_cred; /* layoutcommit cred */
struct inode *plh_inode;
};
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index a07b682..21f333e 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -273,7 +273,7 @@ struct nfs4_layoutcommit_res {
struct nfs4_layoutcommit_data {
struct rpc_task task;
struct nfs_fattr fattr;
- struct pnfs_layout_segment *lseg;
+ struct list_head lseg_list;
struct rpc_cred *cred;
struct nfs4_layoutcommit_args args;
struct nfs4_layoutcommit_res res;
--
1.7.4.1
next prev parent reply other threads:[~2011-07-21 19:34 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-21 19:34 [PATCH v2 00/25] add block layout driver to pnfs client Jim Rees
2011-07-21 19:34 ` [PATCH v2 01/25] pnfs: GETDEVICELIST Jim Rees
2011-07-21 19:34 ` [PATCH v2 02/25] pnfs: add set-clear layoutdriver interface Jim Rees
2011-07-21 19:34 ` Jim Rees [this message]
2011-07-21 19:34 ` [PATCH v2 04/25] NFS41: save layoutcommit cred after first successful layoutget Jim Rees
2011-07-21 19:34 ` [PATCH v2 05/25] pnfs: ask for layout_blksize and save it in nfs_server Jim Rees
2011-07-25 14:24 ` Benny Halevy
2011-07-21 19:34 ` [PATCH v2 06/25] pnfs: cleanup_layoutcommit Jim Rees
2011-07-25 14:26 ` Benny Halevy
2011-07-21 19:34 ` [PATCH v2 07/25] pnfsblock: add blocklayout Kconfig option, Makefile, and stubs Jim Rees
2011-07-25 14:30 ` Benny Halevy
2011-07-25 14:38 ` Myklebust, Trond
2011-07-25 14:50 ` Benny Halevy
2011-07-25 17:25 ` Myklebust, Trond
2011-07-25 18:26 ` Benny Halevy
2011-07-26 17:18 ` Peng Tao
2011-07-21 19:34 ` [PATCH v2 08/25] pnfsblock: basic extent code Jim Rees
2011-07-21 19:34 ` [PATCH v2 09/25] pnfsblock: add device operations Jim Rees
2011-07-21 19:34 ` [PATCH v2 10/25] pnfsblock: remove " Jim Rees
2011-07-21 19:34 ` [PATCH v2 11/25] pnfsblock: lseg alloc and free Jim Rees
2011-07-25 14:43 ` Benny Halevy
2011-07-21 19:34 ` [PATCH v2 12/25] pnfsblock: merge extents Jim Rees
2011-07-21 19:34 ` [PATCH v2 13/25] pnfsblock: call and parse getdevicelist Jim Rees
2011-07-21 19:34 ` [PATCH v2 14/25] pnfsblock: xdr decode pnfs_block_layout4 Jim Rees
2011-07-21 19:34 ` [PATCH v2 15/25] pnfsblock: bl_find_get_extent Jim Rees
2011-07-21 19:34 ` [PATCH v2 16/25] pnfsblock: add extent manipulation functions Jim Rees
2011-07-21 19:34 ` [PATCH v2 17/25] pnfsblock: merge rw extents Jim Rees
2011-07-21 19:34 ` [PATCH v2 18/25] pnfsblock: encode_layoutcommit Jim Rees
2011-07-21 19:34 ` [PATCH v2 19/25] pnfsblock: cleanup_layoutcommit Jim Rees
2011-07-21 19:34 ` [PATCH v2 20/25] pnfsblock: bl_read_pagelist Jim Rees
2011-07-21 19:34 ` [PATCH v2 21/25] pnfsblock: bl_write_pagelist Jim Rees
2011-07-21 19:34 ` [PATCH v2 22/25] pnfsblock: note written INVAL areas for layoutcommit Jim Rees
2011-07-21 19:34 ` [PATCH v2 23/25] pnfsblock: use pageio_ops api Jim Rees
2011-07-21 19:34 ` [PATCH v2 24/25] pnfsblock: write_pagelist handle zero invalid extents Jim Rees
2011-07-21 19:34 ` [PATCH v2 25/25] NFS41: Drop lseg ref before fallthru to MDS Jim Rees
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1311276865-29484-4-git-send-email-rees@umich.edu \
--to=rees@umich.edu \
--cc=Trond.Myklebust@netapp.com \
--cc=honey@citi.umich.edu \
--cc=linux-nfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).