From: schumaker.anna@gmail.com
To: bfields@redhat.com, linux-nfs@vger.kernel.org
Cc: Anna.Schumaker@Netapp.com
Subject: [PATCH 1/4] NFSD: Return eof and maxcount to nfsd4_encode_read()
Date: Fri, 10 Jan 2020 17:35:35 -0500 [thread overview]
Message-ID: <20200110223538.528560-2-Anna.Schumaker@Netapp.com> (raw)
In-Reply-To: <20200110223538.528560-1-Anna.Schumaker@Netapp.com>
From: Anna Schumaker <Anna.Schumaker@Netapp.com>
I want to reuse nfsd4_encode_readv() and nfsd4_encode_splice_read() in
READ_PLUS rather than reimplementing them. READ_PLUS returns a single
eof flag for the entire call and a separate maxcount for each data
segment, so we need to have the READ call encode these values in a
different place.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
---
fs/nfsd/nfs4xdr.c | 60 ++++++++++++++++++++---------------------------
1 file changed, 26 insertions(+), 34 deletions(-)
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index d2dc4c0e22e8..812e82097879 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -3446,23 +3446,22 @@ nfsd4_encode_open_downgrade(struct nfsd4_compoundres *resp, __be32 nfserr, struc
static __be32 nfsd4_encode_splice_read(
struct nfsd4_compoundres *resp,
- struct nfsd4_read *read,
- struct file *file, unsigned long maxcount)
+ struct nfsd4_read *read, struct file *file,
+ unsigned long *maxcount, u32 *eof)
{
struct xdr_stream *xdr = &resp->xdr;
struct xdr_buf *buf = xdr->buf;
- u32 eof;
+ long len;
int space_left;
__be32 nfserr;
- __be32 *p = xdr->p - 2;
/* Make sure there will be room for padding if needed */
if (xdr->end - xdr->p < 1)
return nfserr_resource;
+ len = *maxcount;
nfserr = nfsd_splice_read(read->rd_rqstp, read->rd_fhp,
- file, read->rd_offset, &maxcount, &eof);
- read->rd_length = maxcount;
+ file, read->rd_offset, maxcount, eof);
if (nfserr) {
/*
* nfsd_splice_actor may have already messed with the
@@ -3473,24 +3472,21 @@ static __be32 nfsd4_encode_splice_read(
return nfserr;
}
- *(p++) = htonl(eof);
- *(p++) = htonl(maxcount);
-
- buf->page_len = maxcount;
- buf->len += maxcount;
- xdr->page_ptr += (buf->page_base + maxcount + PAGE_SIZE - 1)
+ buf->page_len = *maxcount;
+ buf->len += *maxcount;
+ xdr->page_ptr += (buf->page_base + *maxcount + PAGE_SIZE - 1)
/ PAGE_SIZE;
/* Use rest of head for padding and remaining ops: */
buf->tail[0].iov_base = xdr->p;
buf->tail[0].iov_len = 0;
xdr->iov = buf->tail;
- if (maxcount&3) {
- int pad = 4 - (maxcount&3);
+ if (*maxcount&3) {
+ int pad = 4 - (*maxcount&3);
*(xdr->p++) = 0;
- buf->tail[0].iov_base += maxcount&3;
+ buf->tail[0].iov_base += *maxcount&3;
buf->tail[0].iov_len = pad;
buf->len += pad;
}
@@ -3504,22 +3500,20 @@ static __be32 nfsd4_encode_splice_read(
}
static __be32 nfsd4_encode_readv(struct nfsd4_compoundres *resp,
- struct nfsd4_read *read,
- struct file *file, unsigned long maxcount)
+ struct nfsd4_read *read, struct file *file,
+ unsigned long *maxcount, u32 *eof)
{
struct xdr_stream *xdr = &resp->xdr;
- u32 eof;
int v;
int starting_len = xdr->buf->len - 8;
long len;
int thislen;
__be32 nfserr;
- __be32 tmp;
__be32 *p;
u32 zzz = 0;
int pad;
- len = maxcount;
+ len = *maxcount;
v = 0;
thislen = min_t(long, len, ((void *)xdr->end - (void *)xdr->p));
@@ -3541,22 +3535,15 @@ static __be32 nfsd4_encode_readv(struct nfsd4_compoundres *resp,
}
read->rd_vlen = v;
- len = maxcount;
+ len = *maxcount;
nfserr = nfsd_readv(resp->rqstp, read->rd_fhp, file, read->rd_offset,
- resp->rqstp->rq_vec, read->rd_vlen, &maxcount,
- &eof);
- read->rd_length = maxcount;
+ resp->rqstp->rq_vec, read->rd_vlen, maxcount, eof);
if (nfserr)
return nfserr;
- xdr_truncate_encode(xdr, starting_len + 8 + ((maxcount+3)&~3));
-
- tmp = htonl(eof);
- write_bytes_to_xdr_buf(xdr->buf, starting_len , &tmp, 4);
- tmp = htonl(maxcount);
- write_bytes_to_xdr_buf(xdr->buf, starting_len + 4, &tmp, 4);
+ xdr_truncate_encode(xdr, starting_len + 8 + ((*maxcount+3)&~3));
- pad = (maxcount&3) ? 4 - (maxcount&3) : 0;
- write_bytes_to_xdr_buf(xdr->buf, starting_len + 8 + maxcount,
+ pad = (*maxcount&3) ? 4 - (*maxcount&3) : 0;
+ write_bytes_to_xdr_buf(xdr->buf, starting_len + 8 + *maxcount,
&zzz, pad);
return 0;
@@ -3567,6 +3554,7 @@ nfsd4_encode_read(struct nfsd4_compoundres *resp, __be32 nfserr,
struct nfsd4_read *read)
{
unsigned long maxcount;
+ u32 eof;
struct xdr_stream *xdr = &resp->xdr;
struct file *file;
int starting_len = xdr->buf->len;
@@ -3595,13 +3583,17 @@ nfsd4_encode_read(struct nfsd4_compoundres *resp, __be32 nfserr,
if (file->f_op->splice_read &&
test_bit(RQ_SPLICE_OK, &resp->rqstp->rq_flags))
- nfserr = nfsd4_encode_splice_read(resp, read, file, maxcount);
+ nfserr = nfsd4_encode_splice_read(resp, read, file, &maxcount, &eof);
else
- nfserr = nfsd4_encode_readv(resp, read, file, maxcount);
+ nfserr = nfsd4_encode_readv(resp, read, file, &maxcount, &eof);
if (nfserr)
xdr_truncate_encode(xdr, starting_len);
+ read->rd_length = maxcount;
+ *p++ = htonl(eof);
+ *p++ = htonl(maxcount);
+
return nfserr;
}
--
2.24.1
next prev parent reply other threads:[~2020-01-10 22:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-10 22:35 [PATCH 0/4] NFSD: Add support for the v4.2 READ_PLUS operation schumaker.anna
2020-01-10 22:35 ` schumaker.anna [this message]
2020-01-10 22:35 ` [PATCH 2/4] NFSD: Add READ_PLUS data support schumaker.anna
2020-01-10 22:35 ` [PATCH 3/4] NFSD: Add READ_PLUS hole segment encoding schumaker.anna
2020-01-10 22:35 ` [PATCH 4/4] NFSD: Encode a full READ_PLUS reply schumaker.anna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200110223538.528560-2-Anna.Schumaker@Netapp.com \
--to=schumaker.anna@gmail.com \
--cc=Anna.Schumaker@Netapp.com \
--cc=bfields@redhat.com \
--cc=linux-nfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).