From: Dan Williams <dan.j.williams@intel.com>
To: linux-nvdimm@lists.01.org
Subject: [ndctl PATCH v2 08/26] ndctl/dimm: Support small label reads/writes
Date: Sat, 27 Jul 2019 14:40:02 -0700 [thread overview]
Message-ID: <156426360258.531577.4845341973289339875.stgit@dwillia2-desk3.amr.corp.intel.com> (raw)
In-Reply-To: <156426356088.531577.14828880045306313118.stgit@dwillia2-desk3.amr.corp.intel.com>
The initial ndctl label read/write implementation assumed that label
read / writes were relatively inexpensive, but that assumption is
invalid in practice. The process of reading a full label area can take
10s of seconds. Implement ndctl_cmd_cfg_{read,write}_set_extent() to
trim the label read/write commands to a range smaller than the full
label area.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
ndctl/lib/libndctl.c | 107 +++++++++++++++++++++++++++++++++++++++++-------
ndctl/lib/libndctl.sym | 2 +
ndctl/lib/private.h | 1
ndctl/libndctl.h | 4 ++
4 files changed, 99 insertions(+), 15 deletions(-)
diff --git a/ndctl/lib/libndctl.c b/ndctl/lib/libndctl.c
index 81e155171c8c..c1ecdd8c9c61 100644
--- a/ndctl/lib/libndctl.c
+++ b/ndctl/lib/libndctl.c
@@ -2582,6 +2582,7 @@ NDCTL_EXPORT struct ndctl_cmd *ndctl_dimm_cmd_new_cfg_read(struct ndctl_cmd *cfg
cmd->get_data->in_offset = 0;
cmd->get_data->in_length = cfg_size->get_size->max_xfer;
cmd->firmware_status = &cmd->get_data->status;
+ cmd->iter.init_offset = 0;
cmd->iter.offset = &cmd->get_data->in_offset;
cmd->iter.xfer = &cmd->get_data->in_length;
cmd->iter.max_xfer = cfg_size->get_size->max_xfer;
@@ -2593,10 +2594,43 @@ NDCTL_EXPORT struct ndctl_cmd *ndctl_dimm_cmd_new_cfg_read(struct ndctl_cmd *cfg
free(cmd);
return NULL;
}
+ cmd->source = cfg_size;
+ ndctl_cmd_ref(cfg_size);
return cmd;
}
+static void iter_set_extent(struct ndctl_cmd_iter *iter, unsigned int len,
+ unsigned int offset)
+{
+ iter->init_offset = offset;
+ *iter->offset = offset;
+ *iter->xfer = min(iter->max_xfer, len);
+ iter->total_xfer = len;
+}
+
+NDCTL_EXPORT int ndctl_cmd_cfg_read_set_extent(struct ndctl_cmd *cfg_read,
+ unsigned int len, unsigned int offset)
+{
+ struct ndctl_ctx *ctx = ndctl_bus_get_ctx(cmd_to_bus(cfg_read));
+ struct ndctl_cmd *cfg_size = cfg_read->source;
+
+ if (cfg_read->type != ND_CMD_GET_CONFIG_DATA
+ || cfg_read->status <= 0) {
+ dbg(ctx, "expected unsubmitted cfg_read command\n");
+ return -EINVAL;
+ }
+
+ if (offset + len > cfg_size->get_size->config_size) {
+ dbg(ctx, "read %d from %d exceeds %d\n", len, offset,
+ cfg_size->get_size->config_size);
+ return -EINVAL;
+ }
+
+ iter_set_extent(&cfg_read->iter, len, offset);
+ return 0;
+}
+
NDCTL_EXPORT struct ndctl_cmd *ndctl_dimm_cmd_new_cfg_write(struct ndctl_cmd *cfg_read)
{
struct ndctl_ctx *ctx = ndctl_bus_get_ctx(cmd_to_bus(cfg_read));
@@ -2632,10 +2666,11 @@ NDCTL_EXPORT struct ndctl_cmd *ndctl_dimm_cmd_new_cfg_write(struct ndctl_cmd *cf
cmd->type = ND_CMD_SET_CONFIG_DATA;
cmd->size = size;
cmd->status = 1;
- cmd->set_data->in_offset = 0;
+ cmd->set_data->in_offset = cfg_read->iter.init_offset;
cmd->set_data->in_length = cfg_read->iter.max_xfer;
cmd->firmware_status = (u32 *) (cmd->cmd_buf
+ sizeof(struct nd_cmd_set_config_hdr) + cfg_read->iter.max_xfer);
+ cmd->iter.init_offset = cfg_read->iter.init_offset;
cmd->iter.offset = &cmd->set_data->in_offset;
cmd->iter.xfer = &cmd->set_data->in_length;
cmd->iter.max_xfer = cfg_read->iter.max_xfer;
@@ -2657,18 +2692,33 @@ NDCTL_EXPORT unsigned int ndctl_cmd_cfg_size_get_size(struct ndctl_cmd *cfg_size
return 0;
}
+static ssize_t iter_access(struct ndctl_cmd_iter *iter, unsigned int len,
+ unsigned int offset)
+{
+ if (offset < iter->init_offset
+ || offset > iter->init_offset + iter->total_xfer
+ || len + offset < len)
+ return -EINVAL;
+ if (len + offset > iter->init_offset + iter->total_xfer)
+ len = iter->total_xfer - offset;
+ return len;
+}
+
NDCTL_EXPORT ssize_t ndctl_cmd_cfg_read_get_data(struct ndctl_cmd *cfg_read,
- void *buf, unsigned int len, unsigned int offset)
+ void *buf, unsigned int _len, unsigned int offset)
{
+ struct ndctl_cmd_iter *iter;
+ ssize_t len;
+
if (cfg_read->type != ND_CMD_GET_CONFIG_DATA || cfg_read->status > 0)
return -EINVAL;
if (cfg_read->status < 0)
return cfg_read->status;
- if (offset > cfg_read->iter.total_xfer || len + offset < len)
- return -EINVAL;
- if (len + offset > cfg_read->iter.total_xfer)
- len = cfg_read->iter.total_xfer - offset;
- memcpy(buf, cfg_read->iter.total_buf + offset, len);
+
+ iter = &cfg_read->iter;
+ len = iter_access(&cfg_read->iter, _len, offset);
+ if (len >= 0)
+ memcpy(buf, iter->total_buf + offset, len);
return len;
}
@@ -2681,29 +2731,56 @@ NDCTL_EXPORT ssize_t ndctl_cmd_cfg_read_get_size(struct ndctl_cmd *cfg_read)
return cfg_read->iter.total_xfer;
}
+NDCTL_EXPORT int ndctl_cmd_cfg_write_set_extent(struct ndctl_cmd *cfg_write,
+ unsigned int len, unsigned int offset)
+{
+ struct ndctl_ctx *ctx = ndctl_bus_get_ctx(cmd_to_bus(cfg_write));
+ struct ndctl_cmd *cfg_size, *cfg_read;
+
+ if (cfg_write->type != ND_CMD_SET_CONFIG_DATA
+ || cfg_write->status <= 0) {
+ dbg(ctx, "expected unsubmitted cfg_write command\n");
+ return -EINVAL;
+ }
+
+ cfg_read = cfg_write->source;
+ cfg_size = cfg_read->source;
+
+ if (offset + len > cfg_size->get_size->config_size) {
+ dbg(ctx, "write %d from %d exceeds %d\n", len, offset,
+ cfg_size->get_size->config_size);
+ return -EINVAL;
+ }
+
+ iter_set_extent(&cfg_write->iter, len, offset);
+ return 0;
+}
+
NDCTL_EXPORT ssize_t ndctl_cmd_cfg_write_set_data(struct ndctl_cmd *cfg_write,
- void *buf, unsigned int len, unsigned int offset)
+ void *buf, unsigned int _len, unsigned int offset)
{
+ ssize_t len;
+
if (cfg_write->type != ND_CMD_SET_CONFIG_DATA || cfg_write->status < 1)
return -EINVAL;
if (cfg_write->status < 0)
return cfg_write->status;
- if (offset > cfg_write->iter.total_xfer || len + offset < len)
- return -EINVAL;
- if (len + offset > cfg_write->iter.total_xfer)
- len = cfg_write->iter.total_xfer - offset;
- memcpy(cfg_write->iter.total_buf + offset, buf, len);
+ len = iter_access(&cfg_write->iter, _len, offset);
+ if (len >= 0)
+ memcpy(cfg_write->iter.total_buf + offset, buf, len);
return len;
}
NDCTL_EXPORT ssize_t ndctl_cmd_cfg_write_zero_data(struct ndctl_cmd *cfg_write)
{
+ struct ndctl_cmd_iter *iter = &cfg_write->iter;
+
if (cfg_write->type != ND_CMD_SET_CONFIG_DATA || cfg_write->status < 1)
return -EINVAL;
if (cfg_write->status < 0)
return cfg_write->status;
- memset(cfg_write->iter.total_buf, 0, cfg_write->iter.total_xfer);
- return cfg_write->iter.total_xfer;
+ memset(iter->total_buf + iter->init_offset, 0, iter->total_xfer);
+ return iter->total_xfer;
}
NDCTL_EXPORT void ndctl_cmd_unref(struct ndctl_cmd *cmd)
diff --git a/ndctl/lib/libndctl.sym b/ndctl/lib/libndctl.sym
index 297f03d7ae39..e79b31c71ae6 100644
--- a/ndctl/lib/libndctl.sym
+++ b/ndctl/lib/libndctl.sym
@@ -409,4 +409,6 @@ global:
LIBNDCTL_20 {
global:
ndctl_bus_poll_scrub_completion;
+ ndctl_cmd_cfg_read_set_extent;
+ ndctl_cmd_cfg_write_set_extent;
} LIBNDCTL_19;
diff --git a/ndctl/lib/private.h b/ndctl/lib/private.h
index 2ddc1d2c34f8..3fc0290ff6a7 100644
--- a/ndctl/lib/private.h
+++ b/ndctl/lib/private.h
@@ -254,6 +254,7 @@ struct ndctl_cmd {
int status;
u32 *firmware_status;
struct ndctl_cmd_iter {
+ u32 init_offset;
u32 *offset;
u32 *xfer; /* pointer to xfer length in cmd */
u8 *data; /* pointer to the data buffer location in cmd */
diff --git a/ndctl/libndctl.h b/ndctl/libndctl.h
index e378802ee4c1..310814fe924c 100644
--- a/ndctl/libndctl.h
+++ b/ndctl/libndctl.h
@@ -321,6 +321,10 @@ unsigned int ndctl_cmd_cfg_size_get_size(struct ndctl_cmd *cfg_size);
ssize_t ndctl_cmd_cfg_read_get_data(struct ndctl_cmd *cfg_read, void *buf,
unsigned int len, unsigned int offset);
ssize_t ndctl_cmd_cfg_read_get_size(struct ndctl_cmd *cfg_read);
+int ndctl_cmd_cfg_read_set_extent(struct ndctl_cmd *cfg_read,
+ unsigned int len, unsigned int offset);
+int ndctl_cmd_cfg_write_set_extent(struct ndctl_cmd *cfg_write,
+ unsigned int len, unsigned int offset);
ssize_t ndctl_cmd_cfg_write_set_data(struct ndctl_cmd *cfg_write, void *buf,
unsigned int len, unsigned int offset);
ssize_t ndctl_cmd_cfg_write_zero_data(struct ndctl_cmd *cfg_write);
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm
next prev parent reply other threads:[~2019-07-27 21:56 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-27 21:39 [ndctl PATCH v2 00/26] Improvements for namespace creation/interrogation Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 01/26] ndctl/dimm: Add 'flags' field to read-labels output Dan Williams
2019-08-02 18:01 ` Verma, Vishal L
2019-08-02 18:19 ` Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 02/26] ndctl/dimm: Add --human support to read-labels Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 03/26] ndctl/build: Drop -Wpointer-arith Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 04/26] ndctl/namespace: Add read-infoblock command Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 05/26] ndctl/test: Update dax-dev to handle multiple e820 ranges Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 06/26] ndctl/test: Make dax.sh more robust vs small namespaces Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 07/26] ndctl/namespace: Always zero info-blocks Dan Williams
2019-07-27 21:40 ` Dan Williams [this message]
2019-07-27 21:40 ` [ndctl PATCH v2 09/26] ndctl/dimm: Minimize data-transfer for init-labels Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 10/26] ndctl/dimm: Add offset and size options to {read, write, zero}-labels Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 11/26] ndctl/dimm: Limit read-labels with --index option Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 12/26] ndctl/namespace: Minimize label data transfer for autolabel Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 13/26] ndctl/namespace: Disable autorecovery of create-namespace failures Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 14/26] ndctl/namespace: Handle 'create-namespace' in label-less mode Dan Williams
2019-08-21 12:56 ` Michal Suchánek
2019-08-21 18:03 ` Verma, Vishal L
2019-08-21 18:19 ` Michal Suchánek
2019-07-27 21:40 ` [ndctl PATCH v2 15/26] ndctl/dimm: Fix init-labels success reporting Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 16/26] ndctl/test: Fix device-dax bus-model detection Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 17/26] ndctl/test: Checkout device-mapper + dax operation Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 18/26] ndctl/test: Exercise sub-section sized namespace creation/deletion Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 19/26] ndctl/namespace: Kill off the legacy mode names Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 20/26] ndctl/namespace: Introduce mode-to-name and name-to-mode helpers Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 21/26] ndctl/namespace: Validate namespace size within validate_namespace_options() Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 22/26] ndctl/namespace: Clarify 16M minimum size requirement Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 23/26] ndctl/namespace: Report ENOSPC when regions are full Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 24/26] ndctl/test: Regression test 'failed to track' Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 25/26] ndctl/namespace: Continue region search on 'missing seed' event Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 26/26] ndctl/monitor: Allow monitor to be manually moved to the background Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=156426360258.531577.4845341973289339875.stgit@dwillia2-desk3.amr.corp.intel.com \
--to=dan.j.williams@intel.com \
--cc=linux-nvdimm@lists.01.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).