Linux-NVDIMM Archive on lore.kernel.org
 help / color / Atom feed
From: Vivek Goyal <vgoyal@redhat.com>
To: linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-nvdimm@lists.01.org
Cc: virtio-fs@redhat.com, dgilbert@redhat.com, stefanha@redhat.com,
	miklos@szeredi.hu
Subject: [PATCH 18/19] fuse: Release file in process context
Date: Wed, 21 Aug 2019 13:57:19 -0400
Message-ID: <20190821175720.25901-19-vgoyal@redhat.com> (raw)
In-Reply-To: <20190821175720.25901-1-vgoyal@redhat.com>

fuse_file_put(sync) can be called with sync=true/false. If sync=true,
it waits for release request response and then calls iput() in the
caller's context. If sync=false, it does not wait for release request
response, frees the fuse_file struct immediately and req->end function
does the iput().

iput() can be a problem with DAX if called in req->end context. If this
is last reference to inode (VFS has let go its reference already), then
iput() will clean DAX mappings as well and send REMOVEMAPPING requests
and wait for completion. (All the the worker thread context which is
processing fuse replies from daemon on the host).

That means it blocks worker thread and it stops processing further
replies and system deadlocks.

So for now, force sync release of file in case of DAX inodes.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
---
 fs/fuse/file.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 2ff7624d58c0..e369a1f92d85 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -579,6 +579,7 @@ void fuse_release_common(struct file *file, bool isdir)
 	struct fuse_file *ff = file->private_data;
 	struct fuse_req *req = ff->reserved_req;
 	int opcode = isdir ? FUSE_RELEASEDIR : FUSE_RELEASE;
+	bool sync = false;
 
 	fuse_prepare_release(fi, ff, file->f_flags, opcode);
 
@@ -599,8 +600,20 @@ void fuse_release_common(struct file *file, bool isdir)
 	 * Make the release synchronous if this is a fuseblk mount,
 	 * synchronous RELEASE is allowed (and desirable) in this case
 	 * because the server can be trusted not to screw up.
+	 *
+	 * For DAX, fuse server is trusted. So it should be fine to
+	 * do a sync file put. Doing async file put is creating
+	 * problems right now because when request finish, iput()
+	 * can lead to freeing of inode. That means it tears down
+	 * mappings backing DAX memory and sends REMOVEMAPPING message
+	 * to server and blocks for completion. Currently, waiting
+	 * in req->end context deadlocks the system as same worker thread
+	 * can't process REMOVEMAPPING reply it is waiting for.
 	 */
-	fuse_file_put(ff, ff->fc->destroy_req != NULL, isdir);
+	if (IS_DAX(req->misc.release.inode) || ff->fc->destroy_req != NULL)
+		sync = true;
+
+	fuse_file_put(ff, sync, isdir);
 }
 
 static int fuse_open(struct inode *inode, struct file *file)
-- 
2.20.1

_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

  parent reply index

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-21 17:57 [PATCH v3 00/19][RFC] virtio-fs: Enable DAX support Vivek Goyal
2019-08-21 17:57 ` [PATCH 01/19] dax: remove block device dependencies Vivek Goyal
2019-08-26 11:51   ` Christoph Hellwig
2019-08-27 16:38     ` Vivek Goyal
2019-08-28  6:58       ` Christoph Hellwig
2019-08-28 17:58         ` Vivek Goyal
2019-08-28 22:53           ` Dave Chinner
2019-08-29  0:04             ` Dan Williams
2019-08-29  9:32               ` Christoph Hellwig
2019-12-16 18:10               ` Vivek Goyal
2020-01-07 12:51                 ` Christoph Hellwig
2020-01-07 14:22                   ` Dan Williams
2020-01-07 17:07                     ` Darrick J. Wong
2020-01-07 17:29                       ` Dan Williams
2020-01-07 18:01                         ` Vivek Goyal
2020-01-07 18:07                           ` Dan Williams
2020-01-07 18:33                             ` Vivek Goyal
2020-01-07 18:49                               ` Dan Williams
2020-01-07 19:02                                 ` Darrick J. Wong
2020-01-07 19:46                                   ` Dan Williams
2020-01-07 23:38                                     ` Dan Williams
2020-01-09 11:24                                 ` Jan Kara
2020-01-09 20:03                                   ` Dan Williams
2020-01-10 12:36                                     ` Christoph Hellwig
2020-01-14 20:31                                     ` Vivek Goyal
2020-01-14 20:39                                       ` Dan Williams
2020-01-14 21:28                                         ` Vivek Goyal
2020-01-14 22:23                                           ` Dan Williams
2020-01-15 19:56                                             ` Vivek Goyal
2020-01-15 20:17                                               ` Dan Williams
2020-01-15 21:08                                                 ` Jeff Moyer
2020-01-16 18:09                                                   ` Dan Williams
2020-01-16 18:39                                                     ` Vivek Goyal
2020-01-16 19:09                                                       ` Dan Williams
2020-01-16 19:23                                                         ` Vivek Goyal
2020-02-11 17:33                                                     ` Vivek Goyal
2020-01-15  9:03                                           ` Jan Kara
2019-08-21 17:57 ` [PATCH 02/19] dax: Pass dax_dev to dax_writeback_mapping_range() Vivek Goyal
2019-08-26 11:53   ` Christoph Hellwig
2019-08-26 20:33     ` Vivek Goyal
2019-08-26 20:58       ` Vivek Goyal
2019-08-26 21:33         ` Dan Williams
2019-08-28  6:58         ` Christoph Hellwig
2020-01-03 14:12         ` Vivek Goyal
2020-01-03 18:12           ` Dan Williams
2020-01-03 18:18             ` Dan Williams
2020-01-03 18:33               ` Vivek Goyal
2020-01-03 19:30                 ` Dan Williams
2020-01-03 18:43               ` Vivek Goyal
2019-08-27 13:45       ` Jan Kara
2019-08-21 17:57 ` [PATCH 03/19] virtio: Add get_shm_region method Vivek Goyal
2019-08-21 17:57 ` [PATCH 04/19] virtio: Implement get_shm_region for PCI transport Vivek Goyal
2019-08-26  1:43   ` [Virtio-fs] " piaojun
2019-08-26 13:06     ` Vivek Goyal
2019-08-27  9:41       ` piaojun
2019-08-27  8:34   ` Cornelia Huck
2019-08-27  8:46     ` Cornelia Huck
2019-08-27 11:53     ` Vivek Goyal
2019-08-21 17:57 ` [PATCH 05/19] virtio: Implement get_shm_region for MMIO transport Vivek Goyal
2019-08-27  8:39   ` Cornelia Huck
2019-08-27 11:54     ` Vivek Goyal
2019-08-21 17:57 ` [PATCH 06/19] fuse, dax: add fuse_conn->dax_dev field Vivek Goyal
2019-08-21 17:57 ` [PATCH 07/19] virtio_fs, dax: Set up virtio_fs dax_device Vivek Goyal
2019-08-21 17:57 ` [PATCH 08/19] fuse: Keep a list of free dax memory ranges Vivek Goyal
2019-08-21 17:57 ` [PATCH 09/19] fuse: implement FUSE_INIT map_alignment field Vivek Goyal
2019-08-21 17:57 ` [PATCH 10/19] fuse: Introduce setupmapping/removemapping commands Vivek Goyal
2019-08-21 17:57 ` [PATCH 11/19] fuse, dax: Implement dax read/write operations Vivek Goyal
2019-08-21 19:49   ` Liu Bo
2019-08-22 12:59     ` Vivek Goyal
2019-08-21 17:57 ` [PATCH 12/19] fuse, dax: add DAX mmap support Vivek Goyal
2019-08-21 17:57 ` [PATCH 13/19] fuse: Define dax address space operations Vivek Goyal
2019-08-21 17:57 ` [PATCH 14/19] fuse, dax: Take ->i_mmap_sem lock during dax page fault Vivek Goyal
2019-08-21 17:57 ` [PATCH 15/19] fuse: Maintain a list of busy elements Vivek Goyal
2019-08-21 17:57 ` [PATCH 16/19] dax: Create a range version of dax_layout_busy_page() Vivek Goyal
2019-08-21 17:57 ` [PATCH 17/19] fuse: Add logic to free up a memory range Vivek Goyal
2019-08-21 17:57 ` Vivek Goyal [this message]
2019-08-21 17:57 ` [PATCH 19/19] fuse: Take inode lock for dax inode truncation Vivek Goyal

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190821175720.25901-19-vgoyal@redhat.com \
    --to=vgoyal@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvdimm@lists.01.org \
    --cc=miklos@szeredi.hu \
    --cc=stefanha@redhat.com \
    --cc=virtio-fs@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-NVDIMM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-nvdimm/0 linux-nvdimm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-nvdimm linux-nvdimm/ https://lore.kernel.org/linux-nvdimm \
		linux-nvdimm@lists.01.org
	public-inbox-index linux-nvdimm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.01.lists.linux-nvdimm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git