linux-nvdimm.lists.01.org archive mirror
 help / color / mirror / Atom feed
From: "Alastair D'Silva" <alastair@au1.ibm.com>
To: alastair@d-silva.org
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>,
	"Benjamin Herrenschmidt" <benh@kernel.crashing.org>,
	"Paul Mackerras" <paulus@samba.org>,
	"Michael Ellerman" <mpe@ellerman.id.au>,
	"Frederic Barrat" <fbarrat@linux.ibm.com>,
	"Andrew Donnellan" <ajd@linux.ibm.com>,
	"Arnd Bergmann" <arnd@arndb.de>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Andrew Morton" <akpm@linux-foundation.org>,
	"Mauro Carvalho Chehab" <mchehab+samsung@kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	"Rob Herring" <robh@kernel.org>,
	"Anton Blanchard" <anton@ozlabs.org>,
	"Krzysztof Kozlowski" <krzk@kernel.org>,
	"Mahesh Salgaonkar" <mahesh@linux.vnet.ibm.com>,
	"Madhavan Srinivasan" <maddy@linux.vnet.ibm.com>,
	"Cédric Le Goater" <clg@kaod.org>,
	"Anju T Sudhakar" <anju@linux.vnet.ibm.com>,
	"Hari Bathini" <hbathini@linux.ibm.com>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Greg Kurz" <groug@kaod.org>,
	"Nicholas Piggin" <npiggin@gmail.com>,
	"Masahiro Yamada" <yamada.masahiro@socionext.com>,
	"Alexey Kardashevskiy" <aik@ozlabs.r>
Subject: [PATCH v3 17/27] powerpc/powernv/pmem: Implement the Read Error Log command
Date: Fri, 21 Feb 2020 14:27:10 +1100	[thread overview]
Message-ID: <20200221032720.33893-18-alastair@au1.ibm.com> (raw)
In-Reply-To: <20200221032720.33893-1-alastair@au1.ibm.com>

From: Alastair D'Silva <alastair@d-silva.org>

The read error log command extracts information from the controller's
internal error log.

This patch exposes this information in 2 ways:
- During probe, if an error occurs & a log is available, print it to the
  console
- After probe, make the error log available to userspace via an IOCTL.
  Userspace is notified of pending error logs in a later patch
  ("powerpc/powernv/pmem: Forward events to userspace")

Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
---
 arch/powerpc/platforms/powernv/pmem/ocxl.c    | 269 ++++++++++++++++++
 .../platforms/powernv/pmem/ocxl_internal.h    |   1 +
 include/uapi/nvdimm/ocxl-pmem.h               |  46 +++
 3 files changed, 316 insertions(+)
 create mode 100644 include/uapi/nvdimm/ocxl-pmem.h

diff --git a/arch/powerpc/platforms/powernv/pmem/ocxl.c b/arch/powerpc/platforms/powernv/pmem/ocxl.c
index 63109a870d2c..2b64504f9129 100644
--- a/arch/powerpc/platforms/powernv/pmem/ocxl.c
+++ b/arch/powerpc/platforms/powernv/pmem/ocxl.c
@@ -447,10 +447,219 @@ static int file_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
+/**
+ * error_log_header_parse() - Parse the first 64 bits of the error log command response
+ * @ocxlpmem: the device metadata
+ * @length: out, returns the number of bytes in the response (excluding the 64 bit header)
+ */
+static int error_log_header_parse(struct ocxlpmem *ocxlpmem, u16 *length)
+{
+	int rc;
+	u64 val;
+
+	u16 data_identifier;
+	u32 data_length;
+
+	rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
+				     ocxlpmem->admin_command.data_offset,
+				     OCXL_LITTLE_ENDIAN, &val);
+	if (rc)
+		return rc;
+
+	data_identifier = val >> 48;
+	data_length = val & 0xFFFF;
+
+	if (data_identifier != 0x454C) { // 'EL'
+		dev_err(&ocxlpmem->dev,
+			"Bad data identifier for error log data, expected 'EL', got '%2s' (%#x), data_length=%u\n",
+			(char *)&data_identifier,
+			(unsigned int)data_identifier, data_length);
+		return -EINVAL;
+	}
+
+	*length = data_length;
+	return 0;
+}
+
+static int error_log_offset_0x08(struct ocxlpmem *ocxlpmem,
+				 u32 *log_identifier, u32 *program_ref_code)
+{
+	int rc;
+	u64 val;
+
+	rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
+				     ocxlpmem->admin_command.data_offset + 0x08,
+				     OCXL_LITTLE_ENDIAN, &val);
+	if (rc)
+		return rc;
+
+	*log_identifier = val >> 32;
+	*program_ref_code = val & 0xFFFFFFFF;
+
+	return 0;
+}
+
+static int read_error_log(struct ocxlpmem *ocxlpmem,
+			  struct ioctl_ocxl_pmem_error_log *log, bool buf_is_user)
+{
+	u64 val;
+	u16 user_buf_length;
+	u16 buf_length;
+	u16 i;
+	int rc;
+
+	if (log->buf_size % 8)
+		return -EINVAL;
+
+	rc = ocxlpmem_chi(ocxlpmem, &val);
+	if (rc)
+		goto out;
+
+	if (!(val & GLOBAL_MMIO_CHI_ELA))
+		return -EAGAIN;
+
+	user_buf_length = log->buf_size;
+
+	mutex_lock(&ocxlpmem->admin_command.lock);
+
+	rc = admin_command_request(ocxlpmem, ADMIN_COMMAND_ERRLOG);
+	if (rc)
+		goto out;
+
+	rc = admin_command_execute(ocxlpmem);
+	if (rc)
+		goto out;
+
+	rc = admin_command_complete_timeout(ocxlpmem, ADMIN_COMMAND_ERRLOG);
+	if (rc < 0) {
+		dev_warn(&ocxlpmem->dev, "Read error log timed out\n");
+		goto out;
+	}
+
+	rc = admin_response(ocxlpmem);
+	if (rc < 0)
+		goto out;
+	if (rc != STATUS_SUCCESS) {
+		warn_status(ocxlpmem, "Unexpected status from retrieve error log", rc);
+		goto out;
+	}
+
+
+	rc = error_log_header_parse(ocxlpmem, &log->buf_size);
+	if (rc)
+		goto out;
+	// log->buf_size now contains the returned buffer size, not the user size
+
+	rc = error_log_offset_0x08(ocxlpmem, &log->log_identifier,
+				       &log->program_reference_code);
+	if (rc)
+		goto out;
+
+	rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
+				     ocxlpmem->admin_command.data_offset + 0x10,
+				     OCXL_LITTLE_ENDIAN, &val);
+	if (rc)
+		goto out;
+
+	log->error_log_type = val >> 56;
+	log->action_flags = (log->error_log_type == OCXL_PMEM_ERROR_LOG_TYPE_GENERAL) ?
+			    (val >> 32) & 0xFFFFFF : 0;
+	log->power_on_seconds = val & 0xFFFFFFFF;
+
+	rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
+				     ocxlpmem->admin_command.data_offset + 0x18,
+				     OCXL_LITTLE_ENDIAN, &log->timestamp);
+	if (rc)
+		goto out;
+
+	rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
+				     ocxlpmem->admin_command.data_offset + 0x20,
+				     OCXL_HOST_ENDIAN, &log->wwid[0]);
+	if (rc)
+		goto out;
+
+	rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
+				     ocxlpmem->admin_command.data_offset + 0x28,
+				     OCXL_HOST_ENDIAN, &log->wwid[1]);
+	if (rc)
+		goto out;
+
+	rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
+				     ocxlpmem->admin_command.data_offset + 0x30,
+				     OCXL_HOST_ENDIAN, (u64 *)log->fw_revision);
+	if (rc)
+		goto out;
+	log->fw_revision[8] = '\0';
+
+	buf_length = (user_buf_length < log->buf_size) ?
+		     user_buf_length : log->buf_size;
+	for (i = 0; i < buf_length + 0x48; i += 8) {
+		u64 val;
+
+		rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
+					     ocxlpmem->admin_command.data_offset + i,
+					     OCXL_HOST_ENDIAN, &val);
+		if (rc)
+			goto out;
+
+		if (buf_is_user) {
+			if (copy_to_user(&log->buf[i], &val, sizeof(u64))) {
+				rc = -EFAULT;
+				goto out;
+			}
+		} else
+			log->buf[i] = val;
+	}
+
+	rc = admin_response_handled(ocxlpmem);
+	if (rc)
+		goto out;
+
+out:
+	mutex_unlock(&ocxlpmem->admin_command.lock);
+	return rc;
+
+}
+
+static int ioctl_error_log(struct ocxlpmem *ocxlpmem,
+		struct ioctl_ocxl_pmem_error_log __user *uarg)
+{
+	struct ioctl_ocxl_pmem_error_log args;
+	int rc;
+
+	if (copy_from_user(&args, uarg, sizeof(args)))
+		return -EFAULT;
+
+	rc = read_error_log(ocxlpmem, &args, true);
+	if (rc)
+		return rc;
+
+	if (copy_to_user(uarg, &args, sizeof(args)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static long file_ioctl(struct file *file, unsigned int cmd, unsigned long args)
+{
+	struct ocxlpmem *ocxlpmem = file->private_data;
+	int rc = -EINVAL;
+
+	switch (cmd) {
+	case IOCTL_OCXL_PMEM_ERROR_LOG:
+		rc = ioctl_error_log(ocxlpmem,
+				     (struct ioctl_ocxl_pmem_error_log __user *)args);
+		break;
+	}
+	return rc;
+}
+
 static const struct file_operations fops = {
 	.owner		= THIS_MODULE,
 	.open		= file_open,
 	.release	= file_release,
+	.unlocked_ioctl = file_ioctl,
+	.compat_ioctl   = file_ioctl,
 };
 
 /**
@@ -527,6 +736,60 @@ static int read_device_metadata(struct ocxlpmem *ocxlpmem)
 	return 0;
 }
 
+static const char *decode_error_log_type(u8 error_log_type)
+{
+	switch (error_log_type) {
+	case 0x00:
+		return "general";
+	case 0x01:
+		return "predictive failure";
+	case 0x02:
+		return "thermal warning";
+	case 0x03:
+		return "data loss";
+	case 0x04:
+		return "health & performance";
+	default:
+		return "unknown";
+	}
+}
+
+static void dump_error_log(struct ocxlpmem *ocxlpmem)
+{
+	struct ioctl_ocxl_pmem_error_log log;
+	u32 buf_size;
+	u8 *buf;
+	int rc;
+
+	if (ocxlpmem->admin_command.data_size == 0)
+		return;
+
+	buf_size = ocxlpmem->admin_command.data_size - 0x48;
+	buf = kzalloc(buf_size, GFP_KERNEL);
+	if (!buf)
+		return;
+
+	log.buf = buf;
+	log.buf_size = buf_size;
+
+	rc = read_error_log(ocxlpmem, &log, false);
+	if (rc < 0)
+		goto out;
+
+	dev_warn(&ocxlpmem->dev,
+		 "OCXL PMEM Error log: WWID=0x%016llx%016llx LID=0x%x PRC=%x type=0x%x %s, Uptime=%u seconds timestamp=0x%llx\n",
+		 log.wwid[0], log.wwid[1],
+		 log.log_identifier, log.program_reference_code,
+		 log.error_log_type,
+		 decode_error_log_type(log.error_log_type),
+		 log.power_on_seconds, log.timestamp);
+	print_hex_dump(KERN_WARNING, "buf", DUMP_PREFIX_OFFSET, 16, 1, buf,
+		       log.buf_size, false);
+
+out:
+	kfree(buf);
+}
+
 /**
  * probe_function0() - Set up function 0 for an OpenCAPI persistent memory device
  * This is important as it enables templates higher than 0 across all other functions,
@@ -568,6 +831,7 @@ static int probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct ocxlpmem *ocxlpmem;
 	int rc;
 	u16 elapsed, timeout;
+	u64 chi;
 
 	if (PCI_FUNC(pdev->devfn) == 0)
 		return probe_function0(pdev);
@@ -667,6 +931,11 @@ static int probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	return 0;
 
 err:
+	if (ocxlpmem &&
+		    (ocxlpmem_chi(ocxlpmem, &chi) == 0) &&
+		    (chi & GLOBAL_MMIO_CHI_ELA))
+		dump_error_log(ocxlpmem);
+
 	/*
 	 * Further cleanup is done in the release handler via free_ocxlpmem()
 	 * This allows us to keep the character device live to handle IOCTLs to
diff --git a/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h b/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h
index d2d81fec7bb1..b953ee522ed4 100644
--- a/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h
+++ b/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h
@@ -5,6 +5,7 @@
 #include <linux/cdev.h>
 #include <misc/ocxl.h>
 #include <linux/libnvdimm.h>
+#include <uapi/nvdimm/ocxl-pmem.h>
 #include <linux/mm.h>
 
 #define LABEL_AREA_SIZE	(1UL << PA_SECTION_SHIFT)
diff --git a/include/uapi/nvdimm/ocxl-pmem.h b/include/uapi/nvdimm/ocxl-pmem.h
new file mode 100644
index 000000000000..b10f8ac0c20f
--- /dev/null
+++ b/include/uapi/nvdimm/ocxl-pmem.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/* Copyright 2017 IBM Corp. */
+#ifndef _UAPI_OCXL_SCM_H
+#define _UAPI_OCXL_SCM_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define OCXL_PMEM_ERROR_LOG_ACTION_RESET	(1 << (32-32))
+#define OCXL_PMEM_ERROR_LOG_ACTION_CHKFW	(1 << (53-32))
+#define OCXL_PMEM_ERROR_LOG_ACTION_REPLACE	(1 << (54-32))
+#define OCXL_PMEM_ERROR_LOG_ACTION_DUMP		(1 << (55-32))
+
+#define OCXL_PMEM_ERROR_LOG_TYPE_GENERAL		(0x00)
+#define OCXL_PMEM_ERROR_LOG_TYPE_PREDICTIVE_FAILURE	(0x01)
+#define OCXL_PMEM_ERROR_LOG_TYPE_THERMAL_WARNING	(0x02)
+#define OCXL_PMEM_ERROR_LOG_TYPE_DATA_LOSS		(0x03)
+#define OCXL_PMEM_ERROR_LOG_TYPE_HEALTH_PERFORMANCE	(0x04)
+
+struct ioctl_ocxl_pmem_error_log {
+	__u32 log_identifier; /* out */
+	__u32 program_reference_code; /* out */
+	__u32 action_flags; /* out, recommended course of action */
+	__u32 power_on_seconds; /* out, Number of seconds the controller has been on when the error occurred */
+	__u64 timestamp; /* out, relative time since the current IPL */
+	__u64 wwid[2]; /* out, the NAA formatted WWID associated with the controller */
+	char  fw_revision[8+1]; /* out, firmware revision as null terminated text */
+	__u16 buf_size; /* in/out, buffer size provided/required.
+			 * If required is greater than provided, the buffer
+			 * will be truncated to the amount provided. If its
+			 * less, then only the required bytes will be populated.
+			 * If it is 0, then there are no more error log entries.
+			 */
+	__u8  error_log_type;
+	__u8  reserved1;
+	__u32 reserved2;
+	__u64 reserved3[2];
+	__u8 *buf; /* pointer to output buffer */
+};
+
+/* ioctl numbers */
+#define OCXL_PMEM_MAGIC 0x5C
+/* SCM devices */
+#define IOCTL_OCXL_PMEM_ERROR_LOG			_IOWR(OCXL_PMEM_MAGIC, 0x01, struct ioctl_ocxl_pmem_error_log)
+
+#endif /* _UAPI_OCXL_SCM_H */
-- 
2.24.1
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org

  parent reply	other threads:[~2020-02-21  3:28 UTC|newest]

Thread overview: 130+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-21  3:26 [PATCH v3 00/27] Add support for OpenCAPI Persistent Memory devices Alastair D'Silva
2020-02-21  3:26 ` [PATCH v3 01/27] powerpc: Add OPAL calls for LPC memory alloc/release Alastair D'Silva
2020-02-24  5:49   ` Andrew Donnellan
2020-02-24  5:50     ` Alastair D'Silva
2020-02-21  3:26 ` [PATCH v3 02/27] mm/memory_hotplug: Allow check_hotplug_memory_addressable to be called from drivers Alastair D'Silva
2020-02-21  7:03   ` Andrew Donnellan
2020-02-21  3:26 ` [PATCH v3 03/27] powerpc: Map & release OpenCAPI LPC memory Alastair D'Silva
2020-02-24  2:51   ` Andrew Donnellan
2020-02-24  5:49     ` Andrew Donnellan
2020-02-25 10:02   ` Frederic Barrat
2020-02-26  0:19     ` Alastair D'Silva
2020-03-03  6:10   ` Andrew Donnellan
2020-03-04  5:33     ` Alastair D'Silva
2020-02-21  3:26 ` [PATCH v3 04/27] ocxl: Remove unnecessary externs Alastair D'Silva
2020-02-21  6:06   ` Andrew Donnellan
2020-02-25 13:23   ` Frederic Barrat
2020-02-26  8:14   ` Baoquan He
2020-02-26  8:26     ` Alastair D'Silva
2020-02-26  9:01       ` Greg Kurz
2020-02-26 14:15         ` 'Baoquan He'
2020-02-26 14:20           ` Greg Kurz
2020-02-26 14:54             ` 'Baoquan He'
2020-02-21  3:26 ` [PATCH v3 05/27] ocxl: Address kernel doc errors & warnings Alastair D'Silva
2020-02-24  2:11   ` Andrew Donnellan
2020-02-21  3:26 ` [PATCH v3 06/27] ocxl: Tally up the LPC memory on a link & allow it to be mapped Alastair D'Silva
2020-02-24  5:25   ` Andrew Donnellan
2020-02-24  5:36     ` Alastair D'Silva
2020-02-25 16:30   ` Frederic Barrat
2020-02-26  0:29     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 07/27] ocxl: Add functions to map/unmap LPC memory Alastair D'Silva
2020-02-24  6:02   ` Andrew Donnellan
2020-02-24  6:08     ` Alastair D'Silva
2020-02-25 17:01   ` Frederic Barrat
2020-02-21  3:27 ` [PATCH v3 08/27] ocxl: Emit a log message showing how much LPC memory was detected Alastair D'Silva
2020-02-24  6:06   ` Andrew Donnellan
2020-02-24  6:10     ` Alastair D'Silva
2020-02-24  6:13       ` Andrew Donnellan
2020-02-25 17:03   ` Frederic Barrat
2020-02-21  3:27 ` [PATCH v3 09/27] ocxl: Save the device serial number in ocxl_fn Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 10/27] powerpc: Add driver for OpenCAPI Persistent Memory Alastair D'Silva
2020-02-26  5:07   ` Andrew Donnellan
2020-02-26  5:49     ` Alastair D'Silva
2020-02-27 20:44   ` Frederic Barrat
2020-02-28  0:54     ` Alastair D'Silva
2020-02-28 18:32   ` Frederic Barrat
2020-02-21  3:27 ` [PATCH v3 11/27] powerpc: Enable the OpenCAPI Persistent Memory driver for powernv_defconfig Alastair D'Silva
2020-02-25  3:01   ` Andrew Donnellan
2020-02-21  3:27 ` [PATCH v3 12/27] powerpc/powernv/pmem: Add register addresses & status values to the header Alastair D'Silva
2020-02-27  5:08   ` Andrew Donnellan
2020-02-27  5:16     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 13/27] powerpc/powernv/pmem: Read the capability registers & wait for device ready Alastair D'Silva
2020-02-27  3:54   ` Andrew Donnellan
2020-02-27  3:58     ` Alastair D'Silva
2020-03-02 17:51   ` Frederic Barrat
2020-03-04  4:15     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 14/27] powerpc/powernv/pmem: Add support for Admin commands Alastair D'Silva
2020-02-27  8:22   ` Andrew Donnellan
2020-02-27  8:27     ` Andrew Donnellan
2020-02-27 23:54       ` Alastair D'Silva
2020-02-27 23:51     ` Alastair D'Silva
2020-02-27 17:01   ` Dan Williams
2020-02-27 23:57     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 15/27] powerpc/powernv/pmem: Add support for near storage commands Alastair D'Silva
2020-02-27  8:30   ` Andrew Donnellan
2020-02-27 23:56     ` Alastair D'Silva
2020-02-27 17:02   ` Dan Williams
2020-03-02 17:58   ` Frederic Barrat
2020-03-02 18:42     ` Dan Williams
2020-03-04  4:42       ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 16/27] powerpc/powernv/pmem: Register a character device for userspace to interact with Alastair D'Silva
2020-03-02  5:34   ` Andrew Donnellan
2020-03-02  6:05     ` Alastair D'Silva
2020-03-03  9:28   ` Frederic Barrat
2020-03-05  3:38     ` Alastair D'Silva
2020-02-21  3:27 ` Alastair D'Silva [this message]
2020-03-03 10:36   ` [PATCH v3 17/27] powerpc/powernv/pmem: Implement the Read Error Log command Frederic Barrat
2020-03-05  4:31     ` Alastair D'Silva
2020-03-05  9:33       ` Frederic Barrat
2020-03-04  5:58   ` Andrew Donnellan
2020-02-21  3:27 ` [PATCH v3 18/27] powerpc/powernv/pmem: Add controller dump IOCTLs Alastair D'Silva
2020-03-03 18:04   ` Frederic Barrat
2020-03-05 23:37     ` Alastair D'Silva
2020-03-04  6:53   ` Andrew Donnellan
2020-03-06  3:34     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 19/27] powerpc/powernv/pmem: Add an IOCTL to report controller statistics Alastair D'Silva
2020-03-04  9:25   ` Frederic Barrat
2020-03-12  0:15     ` Alastair D'Silva
2020-03-05  0:46   ` Andrew Donnellan
2020-03-12  4:47     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 20/27] powerpc/powernv/pmem: Forward events to userspace Alastair D'Silva
2020-03-03  7:02   ` Andrew Donnellan
2020-03-04  5:48     ` Alastair D'Silva
2020-03-04 11:00   ` Frederic Barrat
2020-03-11  3:32     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 21/27] powerpc/powernv/pmem: Add an IOCTL to request controller health & perf data Alastair D'Silva
2020-02-28  6:12   ` Andrew Donnellan
2020-03-02  5:40     ` Alastair D'Silva
2020-03-04 11:06     ` Frederic Barrat
2020-03-11  3:38       ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 22/27] powerpc/powernv/pmem: Implement the heartbeat command Alastair D'Silva
2020-02-28  6:20   ` Andrew Donnellan
2020-03-04 14:25   ` Frederic Barrat
2020-02-21  3:27 ` [PATCH v3 23/27] powerpc/powernv/pmem: Add debug IOCTLs Alastair D'Silva
2020-03-04 15:21   ` Frederic Barrat
2020-03-12  4:24     ` Alastair D'Silva
2020-03-05  3:11   ` Andrew Donnellan
2020-03-12  4:58     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 24/27] powerpc/powernv/pmem: Expose SMART data via ndctl Alastair D'Silva
2020-03-04 15:40   ` Frederic Barrat
2020-03-05  3:36   ` Andrew Donnellan
2020-03-12 23:14     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 25/27] powerpc/powernv/pmem: Expose the serial number in sysfs Alastair D'Silva
2020-02-28  6:25   ` Andrew Donnellan
2020-02-28  7:15     ` Greg Kroah-Hartman
2020-03-01 23:42       ` Alastair D'Silva
2020-03-02  5:38         ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 26/27] powerpc/powernv/pmem: Expose the firmware version " Alastair D'Silva
2020-03-02  7:35   ` Andrew Donnellan
2020-03-04  4:11     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 27/27] MAINTAINERS: Add myself & nvdimm/ocxl to ocxl Alastair D'Silva
2020-02-21  5:35   ` Andrew Donnellan
2020-02-21 16:21 ` [PATCH v3 00/27] Add support for OpenCAPI Persistent Memory devices Dan Williams
2020-02-21 16:24   ` Dan Williams
2020-02-24  4:34   ` Alastair D'Silva
2020-02-24  4:37     ` Matthew Wilcox
2020-02-24  4:42       ` Alastair D'Silva
2020-02-24  6:51         ` Oliver O'Halloran
2020-02-26  0:13           ` Alastair D'Silva
2020-02-26  0:32             ` Dan Williams
2020-02-26  0:35               ` Alastair D'Silva

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200221032720.33893-18-alastair@au1.ibm.com \
    --to=alastair@au1.ibm.com \
    --cc=aik@ozlabs.r \
    --cc=ajd@linux.ibm.com \
    --cc=akpm@linux-foundation.org \
    --cc=alastair@d-silva.org \
    --cc=aneesh.kumar@linux.ibm.com \
    --cc=anju@linux.vnet.ibm.com \
    --cc=anton@ozlabs.org \
    --cc=arnd@arndb.de \
    --cc=benh@kernel.crashing.org \
    --cc=clg@kaod.org \
    --cc=davem@davemloft.net \
    --cc=fbarrat@linux.ibm.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=groug@kaod.org \
    --cc=hbathini@linux.ibm.com \
    --cc=krzk@kernel.org \
    --cc=maddy@linux.vnet.ibm.com \
    --cc=mahesh@linux.vnet.ibm.com \
    --cc=mchehab+samsung@kernel.org \
    --cc=mpe@ellerman.id.au \
    --cc=npiggin@gmail.com \
    --cc=paulus@samba.org \
    --cc=robh@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=yamada.masahiro@socionext.com \
    --subject='Re: [PATCH v3 17/27] powerpc/powernv/pmem: Implement the Read Error Log command' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).