From: Vivek Goyal <vgoyal@redhat.com>
To: Stefan Hajnoczi <stefanha@redhat.com>
Cc: linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-nvdimm@lists.01.org, virtio-fs@redhat.com,
miklos@szeredi.hu, dgilbert@redhat.com, mst@redhat.com,
Sebastien Boeuf <sebastien.boeuf@intel.com>,
kbuild test robot <lkp@intel.com>
Subject: Re: [PATCH 04/20] virtio: Implement get_shm_region for PCI transport
Date: Wed, 11 Mar 2020 15:29:39 -0400 [thread overview]
Message-ID: <20200311192939.GD83257@redhat.com> (raw)
In-Reply-To: <20200311173405.GI281087@stefanha-x1.localdomain>
On Wed, Mar 11, 2020 at 05:34:05PM +0000, Stefan Hajnoczi wrote:
> On Tue, Mar 10, 2020 at 02:19:36PM -0400, Vivek Goyal wrote:
> > On Tue, Mar 10, 2020 at 11:04:37AM +0000, Stefan Hajnoczi wrote:
> > > On Wed, Mar 04, 2020 at 11:58:29AM -0500, Vivek Goyal wrote:
> > > > diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c
> > > > index 7abcc50838b8..52f179411015 100644
> > > > --- a/drivers/virtio/virtio_pci_modern.c
> > > > +++ b/drivers/virtio/virtio_pci_modern.c
> > > > @@ -443,6 +443,111 @@ static void del_vq(struct virtio_pci_vq_info *info)
> > > > vring_del_virtqueue(vq);
> > > > }
> > > >
> > > > +static int virtio_pci_find_shm_cap(struct pci_dev *dev,
> > > > + u8 required_id,
> > > > + u8 *bar, u64 *offset, u64 *len)
> > > > +{
> > > > + int pos;
> > > > +
> > > > + for (pos = pci_find_capability(dev, PCI_CAP_ID_VNDR);
> > >
> > > Please fix the mixed tabs vs space indentation in this patch.
> >
> > Will do. There are plenty of these in this patch.
> >
> > >
> > > > +static bool vp_get_shm_region(struct virtio_device *vdev,
> > > > + struct virtio_shm_region *region, u8 id)
> > > > +{
> > > > + struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> > > > + struct pci_dev *pci_dev = vp_dev->pci_dev;
> > > > + u8 bar;
> > > > + u64 offset, len;
> > > > + phys_addr_t phys_addr;
> > > > + size_t bar_len;
> > > > + int ret;
> > > > +
> > > > + if (!virtio_pci_find_shm_cap(pci_dev, id, &bar, &offset, &len)) {
> > > > + return false;
> > > > + }
> > > > +
> > > > + ret = pci_request_region(pci_dev, bar, "virtio-pci-shm");
> > > > + if (ret < 0) {
> > > > + dev_err(&pci_dev->dev, "%s: failed to request BAR\n",
> > > > + __func__);
> > > > + return false;
> > > > + }
> > > > +
> > > > + phys_addr = pci_resource_start(pci_dev, bar);
> > > > + bar_len = pci_resource_len(pci_dev, bar);
> > > > +
> > > > + if (offset + len > bar_len) {
> > > > + dev_err(&pci_dev->dev,
> > > > + "%s: bar shorter than cap offset+len\n",
> > > > + __func__);
> > > > + return false;
> > > > + }
> > > > +
> > > > + region->len = len;
> > > > + region->addr = (u64) phys_addr + offset;
> > > > +
> > > > + return true;
> > > > +}
> > >
> > > Missing pci_release_region()?
> >
> > Good catch. We don't have a mechanism to call pci_relese_region() and
> > virtio-mmio device's ->get_shm_region() implementation does not even
> > seem to reserve the resources.
> >
> > So how about we leave this resource reservation to the caller.
> > ->get_shm_region() just returns the addr/len pair of requested resource.
> >
> > Something like this patch.
> >
> > ---
> > drivers/virtio/virtio_pci_modern.c | 8 --------
> > fs/fuse/virtio_fs.c | 13 ++++++++++---
> > 2 files changed, 10 insertions(+), 11 deletions(-)
> >
> > Index: redhat-linux/fs/fuse/virtio_fs.c
> > ===================================================================
> > --- redhat-linux.orig/fs/fuse/virtio_fs.c 2020-03-10 09:13:34.624565666 -0400
> > +++ redhat-linux/fs/fuse/virtio_fs.c 2020-03-10 14:11:10.970284651 -0400
> > @@ -763,11 +763,18 @@ static int virtio_fs_setup_dax(struct vi
> > if (!have_cache) {
> > dev_notice(&vdev->dev, "%s: No cache capability\n", __func__);
> > return 0;
> > - } else {
> > - dev_notice(&vdev->dev, "Cache len: 0x%llx @ 0x%llx\n",
> > - cache_reg.len, cache_reg.addr);
> > }
> >
> > + if (!devm_request_mem_region(&vdev->dev, cache_reg.addr, cache_reg.len,
> > + dev_name(&vdev->dev))) {
> > + dev_warn(&vdev->dev, "could not reserve region addr=0x%llx"
> > + " len=0x%llx\n", cache_reg.addr, cache_reg.len);
> > + return -EBUSY;
> > + }
> > +
> > + dev_notice(&vdev->dev, "Cache len: 0x%llx @ 0x%llx\n", cache_reg.len,
> > + cache_reg.addr);
> > +
> > pgmap = devm_kzalloc(&vdev->dev, sizeof(*pgmap), GFP_KERNEL);
> > if (!pgmap)
> > return -ENOMEM;
> > Index: redhat-linux/drivers/virtio/virtio_pci_modern.c
> > ===================================================================
> > --- redhat-linux.orig/drivers/virtio/virtio_pci_modern.c 2020-03-10 08:51:36.886565666 -0400
> > +++ redhat-linux/drivers/virtio/virtio_pci_modern.c 2020-03-10 13:43:15.168753543 -0400
> > @@ -511,19 +511,11 @@ static bool vp_get_shm_region(struct vir
> > u64 offset, len;
> > phys_addr_t phys_addr;
> > size_t bar_len;
> > - int ret;
> >
> > if (!virtio_pci_find_shm_cap(pci_dev, id, &bar, &offset, &len)) {
> > return false;
> > }
> >
> > - ret = pci_request_region(pci_dev, bar, "virtio-pci-shm");
> > - if (ret < 0) {
> > - dev_err(&pci_dev->dev, "%s: failed to request BAR\n",
> > - __func__);
> > - return false;
> > - }
> > -
> > phys_addr = pci_resource_start(pci_dev, bar);
> > bar_len = pci_resource_len(pci_dev, bar);
>
> Do pci_resource_start()/pci_resource_len() work on a BAR where
> pci_request_region() hasn't been called yet? (I haven't checked the
> code, sorry...)
It should. Infact, pci_request_region() itself is calling
pci_resource_start() and pci_resource_len().
>
> Assuming yes, then my next question is whether devm_request_mem_region()
> works in both the VIRTIO PCI and MMIO cases?
It should work on MMIO case as well. This basically works on /proc/iomem
resource tree to reserve resources. So as long as MMIO memory range
has been registered by driver in /proc/iomem, it will work.
>
> If yes, then this looks like a solution, though the need for
> devm_request_mem_region() should be explained in the vp_get_shm_region()
> doc comments so that callers remember to make that call. Or maybe it
> can be included in vp_get_shm_region().
How about adding a line in include/linux/virtio_config.h right below the
@get_shm_region descrition which says.
"This does not reserve the resources and caller is expected to call
devm_request_mem_region() or similar to reserve resources."
Vivek
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org
next prev parent reply other threads:[~2020-03-11 19:29 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-04 16:58 [PATCH 00/20] virtiofs: Add DAX support Vivek Goyal
2020-03-04 16:58 ` [PATCH 01/20] dax: Modify bdev_dax_pgoff() to handle NULL bdev Vivek Goyal
2020-03-04 16:58 ` [PATCH 02/20] dax: Create a range version of dax_layout_busy_page() Vivek Goyal
2020-03-10 15:19 ` Ira Weiny
2020-03-10 20:29 ` Vivek Goyal
2020-03-04 16:58 ` [PATCH 03/20] virtio: Add get_shm_region method Vivek Goyal
2020-03-10 10:53 ` Stefan Hajnoczi
2020-03-04 16:58 ` [PATCH 04/20] virtio: Implement get_shm_region for PCI transport Vivek Goyal
2020-03-10 11:04 ` Stefan Hajnoczi
2020-03-10 18:19 ` Vivek Goyal
2020-03-11 17:34 ` Stefan Hajnoczi
2020-03-11 19:29 ` Vivek Goyal [this message]
2020-03-10 11:12 ` Michael S. Tsirkin
2020-03-10 18:47 ` Vivek Goyal
2020-03-10 21:27 ` Michael S. Tsirkin
2020-03-04 16:58 ` [PATCH 05/20] virtio: Implement get_shm_region for MMIO transport Vivek Goyal
2020-03-10 11:06 ` Stefan Hajnoczi
2020-03-04 16:58 ` [PATCH 06/20] virtiofs: Provide a helper function for virtqueue initialization Vivek Goyal
2020-03-10 14:10 ` Miklos Szeredi
2020-03-04 16:58 ` [PATCH 07/20] fuse: Get rid of no_mount_options Vivek Goyal
2020-03-10 14:12 ` Miklos Szeredi
2020-03-04 16:58 ` [PATCH 08/20] fuse,virtiofs: Add a mount option to enable dax Vivek Goyal
2020-03-10 14:16 ` Miklos Szeredi
2020-03-04 16:58 ` [PATCH 09/20] virtio_fs, dax: Set up virtio_fs dax_device Vivek Goyal
2020-03-04 16:58 ` [PATCH 10/20] fuse,virtiofs: Keep a list of free dax memory ranges Vivek Goyal
2020-03-10 19:29 ` Miklos Szeredi
2020-03-04 16:58 ` [PATCH 11/20] fuse: implement FUSE_INIT map_alignment field Vivek Goyal
2020-03-10 19:31 ` Miklos Szeredi
2020-03-04 16:58 ` [PATCH 12/20] fuse: Introduce setupmapping/removemapping commands Vivek Goyal
2020-03-10 19:49 ` Miklos Szeredi
2020-03-10 20:33 ` Vivek Goyal
2020-03-11 7:03 ` Amir Goldstein
2020-03-11 14:19 ` Miklos Szeredi
2020-03-11 14:41 ` Vivek Goyal
2020-03-11 15:12 ` Miklos Szeredi
2020-03-04 16:58 ` [PATCH 13/20] fuse, dax: Implement dax read/write operations Vivek Goyal
2020-03-12 9:43 ` Miklos Szeredi
2020-03-12 16:02 ` Vivek Goyal
2020-03-13 10:18 ` Miklos Szeredi
2020-03-13 13:41 ` Vivek Goyal
2020-04-04 0:25 ` Liu Bo
2020-04-14 12:54 ` Vivek Goyal
2020-03-04 16:58 ` [PATCH 14/20] fuse,dax: add DAX mmap support Vivek Goyal
2020-03-04 16:58 ` [PATCH 15/20] fuse, dax: Take ->i_mmap_sem lock during dax page fault Vivek Goyal
2020-03-04 16:58 ` [PATCH 16/20] fuse,virtiofs: Define dax address space operations Vivek Goyal
2020-03-04 16:58 ` [PATCH 17/20] fuse,virtiofs: Maintain a list of busy elements Vivek Goyal
2020-03-04 16:58 ` [PATCH 18/20] fuse: Release file in process context Vivek Goyal
2020-03-04 16:58 ` [PATCH 19/20] fuse: Take inode lock for dax inode truncation Vivek Goyal
2020-03-04 16:58 ` [PATCH 20/20] fuse,virtiofs: Add logic to free up a memory range Vivek Goyal
2020-03-11 5:16 ` Liu Bo
2020-03-11 12:59 ` Vivek Goyal
2020-03-11 17:24 ` Liu Bo
2020-03-26 0:09 ` Liu Bo
2020-03-27 14:01 ` Vivek Goyal
2020-03-27 22:06 ` Liu Bo
2020-04-14 19:30 ` Vivek Goyal
2020-04-15 17:22 ` Liu Bo
2020-04-16 19:05 ` Vivek Goyal
2020-04-17 18:05 ` Liu Bo
2020-03-11 5:22 ` [PATCH 00/20] virtiofs: Add DAX support Amir Goldstein
2020-03-11 13:09 ` Vivek Goyal
2020-03-11 18:48 ` Vivek Goyal
2020-03-11 19:32 ` Amir Goldstein
2020-03-11 19:39 ` Vivek Goyal
2020-03-11 13:38 ` Patrick Ohly
2020-03-16 13:02 ` Vivek Goyal
2020-03-17 8:28 ` Patrick Ohly
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200311192939.GD83257@redhat.com \
--to=vgoyal@redhat.com \
--cc=dgilbert@redhat.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvdimm@lists.01.org \
--cc=lkp@intel.com \
--cc=miklos@szeredi.hu \
--cc=mst@redhat.com \
--cc=sebastien.boeuf@intel.com \
--cc=stefanha@redhat.com \
--cc=virtio-fs@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).