Linux-NVDIMM Archive on lore.kernel.org
 help / color / Atom feed
From: Vaibhav Jain <vaibhav@linux.ibm.com>
To: linuxppc-dev@lists.ozlabs.org, linux-nvdimm@lists.01.org
Cc: Vaibhav Jain <vaibhav@linux.ibm.com>,
	"Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>,
	Michael Ellerman <mpe@ellerman.id.au>
Subject: [PATCH v4 0/2] powerpc/papr_scm: add support for reporting NVDIMM 'life_used_percentage' metric
Date: Fri, 31 Jul 2020 12:11:51 +0530
Message-ID: <20200731064153.182203-1-vaibhav@linux.ibm.com> (raw)

Changes since v3[1]:

* Fixed a rebase issue pointed out by Aneesh in first patch in the series.

[1] https://lore.kernel.org/linux-nvdimm/20200730121303.134230-1-vaibhav@linux.ibm.com
---

This small patchset implements kernel side support for reporting
'life_used_percentage' metric in NDCTL with dimm health output for
papr-scm NVDIMMs. With corresponding NDCTL side changes output for
should be like:

$ sudo ndctl list -DH
[
  {
    "dev":"nmem0",
    "health":{
      "health_state":"ok",
      "life_used_percentage":0,
      "shutdown_state":"clean"
    }
  }
]

PHYP supports H_SCM_PERFORMANCE_STATS hcall through which an LPAR can
fetch various performance stats including 'fuel_gauge' percentage for
an NVDIMM. 'fuel_gauge' metric indicates the usable life remaining of
an NVDIMM expressed as percentage and  'life_used_percentage' can be
calculated as 'life_used_percentage = 100 - fuel_gauge'.

Structure of the patchset
=========================
First patch implements necessary scaffolding needed to issue the
H_SCM_PERFORMANCE_STATS hcall and fetch performance stats
catalogue. The patch also implements support for 'perf_stats' sysfs
attribute to report the full catalogue of supported performance stats
by PHYP.

Second and final patch implements support for sending this value to
libndctl by extending the PAPR_PDSM_HEALTH pdsm payload to add a new
field named 'dimm_fuel_gauge' to it.

Vaibhav Jain (2):
  powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
  powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric

 Documentation/ABI/testing/sysfs-bus-papr-pmem |  27 +++
 arch/powerpc/include/uapi/asm/papr_pdsm.h     |   9 +
 arch/powerpc/platforms/pseries/papr_scm.c     | 199 ++++++++++++++++++
 3 files changed, 235 insertions(+)

-- 
2.26.2
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org

             reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-31  6:41 Vaibhav Jain [this message]
2020-07-31  6:41 ` [PATCH v4 1/2] powerpc/papr_scm: Fetch nvdimm performance stats from PHYP Vaibhav Jain
2020-07-31  7:12   ` Aneesh Kumar K.V
2020-07-31  6:41 ` [PATCH v4 2/2] powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric Vaibhav Jain
2020-07-31  7:14   ` Aneesh Kumar K.V
2020-08-02 13:35 ` [PATCH v4 0/2] powerpc/papr_scm: add support for reporting NVDIMM 'life_used_percentage' metric Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200731064153.182203-1-vaibhav@linux.ibm.com \
    --to=vaibhav@linux.ibm.com \
    --cc=aneesh.kumar@linux.ibm.com \
    --cc=linux-nvdimm@lists.01.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-NVDIMM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-nvdimm/0 linux-nvdimm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-nvdimm linux-nvdimm/ https://lore.kernel.org/linux-nvdimm \
		linux-nvdimm@lists.01.org
	public-inbox-index linux-nvdimm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.01.lists.linux-nvdimm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git