From: Santosh Sivaraj <santosh@fossix.org>
To: Linux NVDIMM <linux-nvdimm@lists.01.org>,
Vishal Verma <vishal.l.verma@intel.com>,
"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>,
Vaibhav Jain <vaibhav@linux.ibm.com>,
Shivaprasad G Bhat <sbhat@linux.ibm.com>,
Harish Sriram <harish@linux.ibm.com>
Cc: Santosh Sivaraj <santosh@fossix.org>
Subject: [RFC v4 0/1] PMEM device emulation without nfit depenency
Date: Sun, 8 Nov 2020 17:47:22 +0530 [thread overview]
Message-ID: <20201108121723.2089939-1-santosh@fossix.org> (raw)
The current test module cannot be used for testing platforms (make check)
that do not have support for NFIT. In order to get the ndctl tests working,
we need a module which can emulate NVDIMM devices without relying on
ACPI/NFIT.
The emulated PMEM device is made part of the PAPR family.
Corresponding changes for ndctl is also required, to add attributes needed
for the test, which will be sent as a reply to this patch.
The following is the test result, run on a x86 guest:
PASS: libndctl
PASS: dsm-fail
PASS: dpa-alloc
PASS: parent-uuid
PASS: multi-pmem
PASS: create.sh
FAIL: clear.sh
FAIL: pmem-errors.sh
FAIL: daxdev-errors.sh
PASS: multi-dax.sh
PASS: btt-check.sh
FAIL: label-compat.sh
PASS: blk-exhaust.sh
PASS: sector-mode.sh
FAIL: inject-error.sh
SKIP: btt-errors.sh
PASS: hugetlb
PASS: btt-pad-compat.sh
SKIP: firmware-update.sh
FAIL: ack-shutdown-count-set
PASS: rescan-partitions.sh
FAIL: inject-smart.sh
FAIL: monitor.sh
PASS: max_available_extent_ns.sh
FAIL: pfn-meta-errors.sh
PASS: track-uuid.sh
============================================================================
Testsuite summary for ndctl 70.6.ge117f22
============================================================================
# TOTAL: 26
# PASS: 15
# SKIP: 2
# XFAIL: 0
# FAIL: 9
# XPASS: 0
# ERROR: 0
The following is the test result from a PowerPC 64 guest.
PASS: libndctl
PASS: dsm-fail
PASS: dpa-alloc
PASS: parent-uuid
PASS: multi-pmem
PASS: create.sh
FAIL: clear.sh
FAIL: pmem-errors.sh
FAIL: daxdev-errors.sh
PASS: multi-dax.sh
PASS: btt-check.sh
FAIL: label-compat.sh
PASS: blk-exhaust.sh
PASS: sector-mode.sh
FAIL: inject-error.sh
SKIP: btt-errors.sh
SKIP: hugetlb
PASS: btt-pad-compat.sh
SKIP: firmware-update.sh
FAIL: ack-shutdown-count-set
PASS: rescan-partitions.sh
FAIL: inject-smart.sh
FAIL: monitor.sh
PASS: max_available_extent_ns.sh
FAIL: pfn-meta-errors.sh
PASS: track-uuid.sh
============================================================================
Testsuite summary for ndctl 70.gite29f6c57
============================================================================
# TOTAL: 26
# PASS: 14
# SKIP: 3
# XFAIL: 0
# FAIL: 9
# XPASS: 0
# ERROR: 0
Error injection tests and SMART are not yet implemented. To run the tests disable
CONFIG_ACPI_NFIT, the kernel will pick the new driver.
Santosh Sivaraj (1):
testing/nvdimm: Add test module for non-nfit platforms
drivers/nvdimm/region_devs.c | 5 +
tools/testing/nvdimm/config_check.c | 3 +-
tools/testing/nvdimm/test/Kbuild | 6 +-
tools/testing/nvdimm/test/ndtest.c | 1174 +++++++++++++++++++++++++++
tools/testing/nvdimm/test/ndtest.h | 84 ++
5 files changed, 1270 insertions(+), 2 deletions(-)
create mode 100644 tools/testing/nvdimm/test/ndtest.c
create mode 100644 tools/testing/nvdimm/test/ndtest.h
--
2.26.2
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org
next reply other threads:[~2020-11-08 12:18 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-08 12:17 Santosh Sivaraj [this message]
2020-11-08 12:17 ` [RFC v4 1/1] testing/nvdimm: Add test module for non-nfit platforms Santosh Sivaraj
2020-11-08 12:20 ` [ndctl RFC v4 1/3] libndctl: test enablement for non-nfit devices Santosh Sivaraj
2020-11-08 12:20 ` [ndctl RFC v4 2/3] Skip smart tests when non nfit devices present Santosh Sivaraj
2020-12-07 23:24 ` Dan Williams
2020-11-08 12:20 ` [ndctl RFC v4 3/3] Use page size as alignment value Santosh Sivaraj
2020-12-07 23:26 ` Dan Williams
2020-12-07 23:07 ` [ndctl RFC v4 1/3] libndctl: test enablement for non-nfit devices Dan Williams
2020-12-09 2:09 ` Santosh Sivaraj
2020-11-20 18:42 ` [RFC v4 0/1] PMEM device emulation without nfit depenency Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201108121723.2089939-1-santosh@fossix.org \
--to=santosh@fossix.org \
--cc=aneesh.kumar@linux.ibm.com \
--cc=harish@linux.ibm.com \
--cc=linux-nvdimm@lists.01.org \
--cc=sbhat@linux.ibm.com \
--cc=vaibhav@linux.ibm.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).