From: Santosh Sivaraj <santosh@fossix.org>
To: "Verma, Vishal L" <vishal.l.verma@intel.com>,
"sbhat@linux.ibm.com" <sbhat@linux.ibm.com>,
"linux-nvdimm@lists.01.org" <linux-nvdimm@lists.01.org>,
"harish@linux.ibm.com" <harish@linux.ibm.com>,
"Williams, Dan J" <dan.j.williams@intel.com>,
"vaibhav@linux.ibm.com" <vaibhav@linux.ibm.com>
Subject: Re: [PATCH 2/4] test: Don't skip tests if nfit modules are missing
Date: Thu, 13 May 2021 10:45:53 +0530 [thread overview]
Message-ID: <87fsyr2oza.fsf@fossix.org> (raw)
In-Reply-To: <87im3n2qm6.fsf@fossix.org>
Santosh Sivaraj <santosh@fossix.org> writes:
> "Verma, Vishal L" <vishal.l.verma@intel.com> writes:
>
> Hi Vishal,
>
>> On Sat, 2021-05-01 at 11:57 +0530, Santosh Sivaraj wrote:
>>> "Verma, Vishal L" <vishal.l.verma@intel.com> writes:
>>>
>>> Hi Vishal,
>>>
>>> > On Sun, 2021-03-28 at 07:39 +0530, Santosh Sivaraj wrote:
>>> > > For NFIT to be available ACPI is a must, so don't fail when nfit modules
>>> > > are missing on a platform that doesn't support ACPI.
>>> > >
>>> > > Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
>>> > > ---
>>> > > test.h | 2 +-
>>> > > test/ack-shutdown-count-set.c | 2 +-
>>> > > test/blk_namespaces.c | 2 +-
>>> > > test/core.c | 30 ++++++++++++++++++++++++++++--
>>> > > test/dpa-alloc.c | 2 +-
>>> > > test/dsm-fail.c | 2 +-
>>> > > test/libndctl.c | 2 +-
>>> > > test/multi-pmem.c | 2 +-
>>> > > test/parent-uuid.c | 2 +-
>>> > > test/pmem_namespaces.c | 2 +-
>>> > > 10 files changed, 37 insertions(+), 11 deletions(-)
>>> > >
>>> >
>>> > I haven't looked deeper, but this seems to fail the blk-ns test with:
>>> >
>>> > ACPI.NFIT unavailable falling back to nfit_test
>>> > test/init: ndctl_test_init: Cannot determine NVDIMM family
>>> > __ndctl_test_skip: explicit skip test_blk_namespaces:235
>>> > nfit_test unavailable skipping tests
>>>
>>> The first message will be emitted even without the changes if the bus is not
>>> found. The second error will be emitted when check "/sys/bus/acpi" is not
>>> found. We fail for all other buses by default except for NFIT as before and PAPR
>>> tests are enabled only when NVDIMM_TEST_FAMILY is set to "PAPR".
>>
>> See below on this.
>>
>>>
>>> All tests pass in my setup (x86_64 qemu guest) with the recent upstream kernel,
>>> except for the the below warning from drivers/acpi/nfit/core.c:
>>
>> Hm I've not seen this with 5.11 or 5.12. What's the qemu command line
>> and is it just triggered from a unit test tun?
>
> This was on a 5.12 kernel, which I have mentioned earlier, but I am not able to
> reproduce now, I had rebased the kernel now. But anyway it doesn't seem to be
> reproducible now. Will come back if I see something again.
I could reproduce this with
make check TESTS=create.sh
and it reproduces with all the tests when the module is being removed.
kernel: 5.13-rc1 (6efb943b8616ec53a5e444193dccf1af9ad627b5)
ndctl: ea014c0c9ec8d0ef945d072dcc52b306c7a686f9
qemu --version: QEMU emulator version 5.0.1 (v5.0.1)
$QEMU_X86 -smp 4 -enable-kvm -hda $DISK -boot c \
-m 4G,slots=4,maxmem=8G \
-M pc,accel=kvm,nvdimm \
-name guest=santosh-x86,debug-threads=on \
-netdev user,id=ethernet.0,hostfwd=tcp::12121-:22 -device e1000,netdev=ethernet.0 \
-serial mon:stdio -display none -vga none -nographic \
-kernel $1 -append "console=ttyS0 root=$ROOT" \
-hdb $DISK2
Thanks,
Santosh
>
>>
>>>
>>> [ 2426.727584] ------------[ cut here ]------------
>>> [ 2426.728405] WARNING: CPU: 2 PID: 47504 at tools/testing/nvdimm/../../../drivers/acpi/nfit/core.c:3879 nfit_exit+0x]
>>> [ 2426.730264] Modules linked in: dax_pmem(O) nd_pmem(O) nfit(O-) kmem dax_pmem_compat(O) nd_blk(O) dax_pmem_core(O) ]
>>> [ 2426.733209] CPU: 2 PID: 47504 Comm: modprobe Tainted: G W O 5.12.0+ #3
>>> [ 2426.734472] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.o4
>>> [ 2426.736305] RIP: 0010:nfit_exit+0x2c/0x703 [nfit]
>>> [ 2426.737099] Code: fd ff ff 48 c7 c7 00 f0 39 c0 e8 52 a1 38 da 48 8b 3d 6b 46 00 00 e8 e6 88 ee d9 48 8b 05 5f 3c 0
>>> [ 2426.740046] RSP: 0018:ffffa8e800b77ed8 EFLAGS: 00010287
>>> [ 2426.740990] RAX: ffff95b7e51935b0 RBX: 0000000000000800 RCX: ffffffff9b4a36a8
>>> [ 2426.742236] RDX: 0000000000000000 RSI: 0000000000000083 RDI: ffff95b7c03e1554
>>> [ 2426.743404] RBP: ffffffffc039f740 R08: 0000000000000400 R09: ffff95b7c03e0e50
>>> [ 2426.744617] R10: ffff95b7fbd296f0 R11: 0000000000895440 R12: ffffa8e800b77f58
>>> [ 2426.745792] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
>>> [ 2426.746946] FS: 00007f48297e3740(0000) GS:ffff95b7fbd00000(0000) knlGS:0000000000000000
>>> [ 2426.748250] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>> [ 2426.749198] CR2: 000056072aadc9f8 CR3: 0000000118b08000 CR4: 00000000000006e0
>>> [ 2426.750349] Call Trace:
>>> [ 2426.750754] __do_sys_delete_module+0x19d/0x240
>>> [ 2426.751472] ? task_work_run+0x5c/0x90
>>> [ 2426.751964] ? exit_to_user_mode_prepare+0x2a/0x130
>>> [ 2426.752637] do_syscall_64+0x40/0x80
>>> [ 2426.753121] entry_SYSCALL_64_after_hwframe+0x44/0xae
>>> [ 2426.753810] RIP: 0033:0x7f482991361b
>>> [ 2426.754274] Code: 73 01 c3 48 8b 0d 5d 18 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 8
>>> [ 2426.756668] RSP: 002b:00007ffd46c89b98 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
>>> [ 2426.757676] RAX: ffffffffffffffda RBX: 000056072aad8f90 RCX: 00007f482991361b
>>> [ 2426.758618] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000056072aad8ff8
>>> [ 2426.759563] RBP: 000056072aad8f90 R08: 0000000000000000 R09: 0000000000000000
>>> [ 2426.760513] R10: 00007f4829987ac0 R11: 0000000000000206 R12: 000056072aad8ff8
>>> [ 2426.761463] R13: 0000000000000000 R14: 000056072aadb4e8 R15: 00007ffd46c89d18
>>> [ 2426.762405] ---[ end trace 14a8748cda8b4777 ]---
>>>
>>> This was not seen with the 5.11 kernel.
>>>
>>> Thanks,
>>> Santosh
>>> >
>>> > > diff --git a/test.h b/test.h
>>> > > index cba8d41..7de13fe 100644
>>> > > --- a/test.h
>>> > > +++ b/test.h
>>> > > @@ -20,7 +20,7 @@ void builtin_xaction_namespace_reset(void);
>>> > >
>>> > >
>>> > > struct kmod_ctx;
>>> > > struct kmod_module;
>>> > > -int nfit_test_init(struct kmod_ctx **ctx, struct kmod_module **mod,
>>> > > +int ndctl_test_init(struct kmod_ctx **ctx, struct kmod_module **mod,
>>> > > struct ndctl_ctx *nd_ctx, int log_level,
>>> > > struct ndctl_test *test);
>>> > >
>>> > >
>>> > > diff --git a/test/ack-shutdown-count-set.c b/test/ack-shutdown-count-set.c
>>> > > index fb1d82b..c561ff3 100644
>>> > > --- a/test/ack-shutdown-count-set.c
>>> > > +++ b/test/ack-shutdown-count-set.c
>>> > > @@ -99,7 +99,7 @@ static int test_ack_shutdown_count_set(int loglevel, struct ndctl_test *test,
>>> > > int result = EXIT_FAILURE, err;
>>> > >
>>> > >
>>> > > ndctl_set_log_priority(ctx, loglevel);
>>> > > - err = nfit_test_init(&kmod_ctx, &mod, NULL, loglevel, test);
>>> > > + err = ndctl_test_init(&kmod_ctx, &mod, NULL, loglevel, test);
>>> > > if (err < 0) {
>>> > > result = 77;
>>> > > ndctl_test_skip(test);
>>> > > diff --git a/test/blk_namespaces.c b/test/blk_namespaces.c
>>> > > index d7f00cb..f076e85 100644
>>> > > --- a/test/blk_namespaces.c
>>> > > +++ b/test/blk_namespaces.c
>>> > > @@ -228,7 +228,7 @@ int test_blk_namespaces(int log_level, struct ndctl_test *test,
>>> > >
>>> > >
>>> > > if (!bus) {
>>> > > fprintf(stderr, "ACPI.NFIT unavailable falling back to nfit_test\n");
>>> > > - rc = nfit_test_init(&kmod_ctx, &mod, NULL, log_level, test);
>>> > > + rc = ndctl_test_init(&kmod_ctx, &mod, NULL, log_level, test);
>>> > > ndctl_invalidate(ctx);
>>> > > bus = ndctl_bus_get_by_provider(ctx, "nfit_test.0");
>>> > > if (rc < 0 || !bus) {
>>> > > diff --git a/test/core.c b/test/core.c
>>> > > index cc7d8d9..44cb277 100644
>>> > > --- a/test/core.c
>>> > > +++ b/test/core.c
>>> > > @@ -11,6 +11,7 @@
>>> > > #include <util/log.h>
>>> > > #include <util/sysfs.h>
>>> > > #include <ndctl/libndctl.h>
>>> > > +#include <ndctl/ndctl.h>
>>> > > #include <ccan/array_size/array_size.h>
>>> > >
>>> > >
>>> > > #define KVER_STRLEN 20
>>> > > @@ -106,11 +107,11 @@ int ndctl_test_get_skipped(struct ndctl_test *test)
>>> > > return test->skip;
>>> > > }
>>> > >
>>> > >
>>> > > -int nfit_test_init(struct kmod_ctx **ctx, struct kmod_module **mod,
>>> > > +int ndctl_test_init(struct kmod_ctx **ctx, struct kmod_module **mod,
>>> > > struct ndctl_ctx *nd_ctx, int log_level,
>>> > > struct ndctl_test *test)
>>> > > {
>>> > > - int rc;
>>> > > + int rc, family = -1;
>>> > > unsigned int i;
>>> > > const char *name;
>>> > > struct ndctl_bus *bus;
>>> > > @@ -127,10 +128,30 @@ int nfit_test_init(struct kmod_ctx **ctx, struct kmod_module **mod,
>>> > > "nd_e820",
>>> > > "nd_pmem",
>>> > > };
>>> > > + char *test_env;
>>> > >
>>> > >
>>> > > log_init(&log_ctx, "test/init", "NDCTL_TEST");
>>> > > log_ctx.log_priority = log_level;
>>> > >
>>> > >
>>> > > + /*
>>> > > + * The following two checks determine the platform family. For
>>> > > + * Intel/platforms which support ACPI, check sysfs; for other platforms
>>> > > + * determine from the environment variable NVDIMM_TEST_FAMILY
>>> > > + */
>>> > > + if (access("/sys/bus/acpi", F_OK) == 0) {
>>> > > + if (errno == ENOENT)
>>> > > + family = NVDIMM_FAMILY_INTEL;
>>> > > + }
>>
>> Did you mean for the errno check to be if (errno != ENOENT) ?
>> This is what was causing the unit test failure for me. This patch on
>> top fixes it for me:
>>
>> diff --git a/test/core.c b/test/core.c
>> index 44cb277..698bb66 100644
>> --- a/test/core.c
>> +++ b/test/core.c
>> @@ -139,7 +139,7 @@ int ndctl_test_init(struct kmod_ctx **ctx, struct
>> kmod_module **mod,
>> * determine from the environment variable NVDIMM_TEST_FAMILY
>> */
>> if (access("/sys/bus/acpi", F_OK) == 0) {
>> - if (errno == ENOENT)
>> + if (errno != ENOENT)
>> family = NVDIMM_FAMILY_INTEL;
>> }
>>
>> If this looks okay do you want to send out a respin with this and I'll
>> pick it up.
>
> That's this looks okay. I will send out an updated version today.
>
> Thanks,
> Santosh
>>
>> Thanks,
>> -Vishal
>>> >
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org
next prev parent reply other threads:[~2021-05-13 5:16 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-28 2:09 [PATCH 1/4] libndctl: Unify adding dimms for papr and nfit families Santosh Sivaraj
2021-03-28 2:09 ` [PATCH 2/4] test: Don't skip tests if nfit modules are missing Santosh Sivaraj
2021-04-05 12:25 ` Aneesh Kumar K.V
2021-04-07 5:09 ` Santosh Sivaraj
2021-04-30 16:35 ` Verma, Vishal L
2021-05-01 6:27 ` Santosh Sivaraj
2021-05-12 21:00 ` Verma, Vishal L
2021-05-12 21:06 ` Verma, Vishal L
2021-05-13 4:40 ` Santosh Sivaraj
2021-05-13 5:15 ` Santosh Sivaraj [this message]
2021-03-28 2:10 ` [PATCH 3/4] papr: Add support to parse save_fail flag for dimm Santosh Sivaraj
2021-03-28 2:10 ` [PATCH 4/4] Use page size as alignment value Santosh Sivaraj
2021-03-28 2:15 ` [PATCH 1/4] libndctl: Unify adding dimms for papr and nfit families Santosh Sivaraj
[not found] <draft-87h7jn2co4.fsf@fossix.org>
2021-05-01 10:51 ` [PATCH 2/4] test: Don't skip tests if nfit modules are missing Santosh Sivaraj
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87fsyr2oza.fsf@fossix.org \
--to=santosh@fossix.org \
--cc=dan.j.williams@intel.com \
--cc=harish@linux.ibm.com \
--cc=linux-nvdimm@lists.01.org \
--cc=sbhat@linux.ibm.com \
--cc=vaibhav@linux.ibm.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).