Linux-NVDIMM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v4 0/2] powerpc/papr_scm: add support for reporting NVDIMM 'life_used_percentage' metric
@ 2020-07-31  6:41 Vaibhav Jain
  2020-07-31  6:41 ` [PATCH v4 1/2] powerpc/papr_scm: Fetch nvdimm performance stats from PHYP Vaibhav Jain
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Vaibhav Jain @ 2020-07-31  6:41 UTC (permalink / raw)
  To: linuxppc-dev, linux-nvdimm
  Cc: Vaibhav Jain, Aneesh Kumar K . V, Michael Ellerman

Changes since v3[1]:

* Fixed a rebase issue pointed out by Aneesh in first patch in the series.

[1] https://lore.kernel.org/linux-nvdimm/20200730121303.134230-1-vaibhav@linux.ibm.com
---

This small patchset implements kernel side support for reporting
'life_used_percentage' metric in NDCTL with dimm health output for
papr-scm NVDIMMs. With corresponding NDCTL side changes output for
should be like:

$ sudo ndctl list -DH
[
  {
    "dev":"nmem0",
    "health":{
      "health_state":"ok",
      "life_used_percentage":0,
      "shutdown_state":"clean"
    }
  }
]

PHYP supports H_SCM_PERFORMANCE_STATS hcall through which an LPAR can
fetch various performance stats including 'fuel_gauge' percentage for
an NVDIMM. 'fuel_gauge' metric indicates the usable life remaining of
an NVDIMM expressed as percentage and  'life_used_percentage' can be
calculated as 'life_used_percentage = 100 - fuel_gauge'.

Structure of the patchset
=========================
First patch implements necessary scaffolding needed to issue the
H_SCM_PERFORMANCE_STATS hcall and fetch performance stats
catalogue. The patch also implements support for 'perf_stats' sysfs
attribute to report the full catalogue of supported performance stats
by PHYP.

Second and final patch implements support for sending this value to
libndctl by extending the PAPR_PDSM_HEALTH pdsm payload to add a new
field named 'dimm_fuel_gauge' to it.

Vaibhav Jain (2):
  powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
  powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric

 Documentation/ABI/testing/sysfs-bus-papr-pmem |  27 +++
 arch/powerpc/include/uapi/asm/papr_pdsm.h     |   9 +
 arch/powerpc/platforms/pseries/papr_scm.c     | 199 ++++++++++++++++++
 3 files changed, 235 insertions(+)

-- 
2.26.2
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v4 1/2] powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
  2020-07-31  6:41 [PATCH v4 0/2] powerpc/papr_scm: add support for reporting NVDIMM 'life_used_percentage' metric Vaibhav Jain
@ 2020-07-31  6:41 ` Vaibhav Jain
  2020-07-31  7:12   ` Aneesh Kumar K.V
  2020-07-31  6:41 ` [PATCH v4 2/2] powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric Vaibhav Jain
  2020-08-02 13:35 ` [PATCH v4 0/2] powerpc/papr_scm: add support for reporting NVDIMM 'life_used_percentage' metric Michael Ellerman
  2 siblings, 1 reply; 6+ messages in thread
From: Vaibhav Jain @ 2020-07-31  6:41 UTC (permalink / raw)
  To: linuxppc-dev, linux-nvdimm
  Cc: Vaibhav Jain, Aneesh Kumar K . V, Michael Ellerman

Update papr_scm.c to query dimm performance statistics from PHYP via
H_SCM_PERFORMANCE_STATS hcall and export them to user-space as PAPR
specific NVDIMM attribute 'perf_stats' in sysfs. The patch also
provide a sysfs ABI documentation for the stats being reported and
their meanings.

During NVDIMM probe time in papr_scm_nvdimm_init() a special variant
of H_SCM_PERFORMANCE_STATS hcall is issued to check if collection of
performance statistics is supported or not. If successful then a PHYP
returns a maximum possible buffer length needed to read all
performance stats. This returned value is stored in a per-nvdimm
attribute 'stat_buffer_len'.

The layout of request buffer for reading NVDIMM performance stats from
PHYP is defined in 'struct papr_scm_perf_stats' and 'struct
papr_scm_perf_stat'. These structs are used in newly introduced
drc_pmem_query_stats() that issues the H_SCM_PERFORMANCE_STATS hcall.

The sysfs access function perf_stats_show() uses value
'stat_buffer_len' to allocate a buffer large enough to hold all
possible NVDIMM performance stats and passes it to
drc_pmem_query_stats() to populate. Finally statistics reported in the
buffer are formatted into the sysfs access function output buffer.

Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
---
Changelog:

v4:
* Fixed a build issue with this patch by moving a hunk from second
  patch in series to this patch. [ Aneesh ]

v3:
* Updated drc_pmem_query_stats() to not require 'buff_size' and 'out'
  args to the function. Instead 'buff_size' is calculated from
  'num_stats' and instead of populating 'R4' in arg 'out' the value is
  returned from the function in case 'R4' represents
  'max-buffer-size'.

Resend:
None

v2:
* Updated 'struct papr_scm_perf_stats' and 'struct papr_scm_perf_stat'
to use big-endian types. [ Aneesh ]
* s/len_stat_buffer/stat_buffer_len/ [ Aneesh ]
* s/statistics_id/stat_id/ , s/statistics_val/stat_val/ [ Aneesh ]
* Conversion from Big endian to cpu endian happens later rather than
just after its fetched from PHYP.
* Changed a log statement to unambiguously report dimm performance
stats are not available for the given nvdimm [ Ira ]
* Restructed some code to handle error case first [ Ira ]
---
 Documentation/ABI/testing/sysfs-bus-papr-pmem |  27 ++++
 arch/powerpc/platforms/pseries/papr_scm.c     | 150 ++++++++++++++++++
 2 files changed, 177 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-bus-papr-pmem b/Documentation/ABI/testing/sysfs-bus-papr-pmem
index 5b10d036a8d4..c1a67275c43f 100644
--- a/Documentation/ABI/testing/sysfs-bus-papr-pmem
+++ b/Documentation/ABI/testing/sysfs-bus-papr-pmem
@@ -25,3 +25,30 @@ Description:
 				  NVDIMM have been scrubbed.
 		* "locked"	: Indicating that NVDIMM contents cant
 				  be modified until next power cycle.
+
+What:		/sys/bus/nd/devices/nmemX/papr/perf_stats
+Date:		May, 2020
+KernelVersion:	v5.9
+Contact:	linuxppc-dev <linuxppc-dev@lists.ozlabs.org>, linux-nvdimm@lists.01.org,
+Description:
+		(RO) Report various performance stats related to papr-scm NVDIMM
+		device.  Each stat is reported on a new line with each line
+		composed of a stat-identifier followed by it value. Below are
+		currently known dimm performance stats which are reported:
+
+		* "CtlResCt" : Controller Reset Count
+		* "CtlResTm" : Controller Reset Elapsed Time
+		* "PonSecs " : Power-on Seconds
+		* "MemLife " : Life Remaining
+		* "CritRscU" : Critical Resource Utilization
+		* "HostLCnt" : Host Load Count
+		* "HostSCnt" : Host Store Count
+		* "HostSDur" : Host Store Duration
+		* "HostLDur" : Host Load Duration
+		* "MedRCnt " : Media Read Count
+		* "MedWCnt " : Media Write Count
+		* "MedRDur " : Media Read Duration
+		* "MedWDur " : Media Write Duration
+		* "CchRHCnt" : Cache Read Hit Count
+		* "CchWHCnt" : Cache Write Hit Count
+		* "FastWCnt" : Fast Write Count
\ No newline at end of file
diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
index 3d1235a76ba9..f37f3f70007d 100644
--- a/arch/powerpc/platforms/pseries/papr_scm.c
+++ b/arch/powerpc/platforms/pseries/papr_scm.c
@@ -64,6 +64,26 @@
 				    PAPR_PMEM_HEALTH_FATAL |	\
 				    PAPR_PMEM_HEALTH_UNHEALTHY)
 
+#define PAPR_SCM_PERF_STATS_EYECATCHER __stringify(SCMSTATS)
+#define PAPR_SCM_PERF_STATS_VERSION 0x1
+
+/* Struct holding a single performance metric */
+struct papr_scm_perf_stat {
+	u8 stat_id[8];
+	__be64 stat_val;
+} __packed;
+
+/* Struct exchanged between kernel and PHYP for fetching drc perf stats */
+struct papr_scm_perf_stats {
+	u8 eye_catcher[8];
+	/* Should be PAPR_SCM_PERF_STATS_VERSION */
+	__be32 stats_version;
+	/* Number of stats following */
+	__be32 num_statistics;
+	/* zero or more performance matrics */
+	struct papr_scm_perf_stat scm_statistic[];
+} __packed;
+
 /* private struct associated with each region */
 struct papr_scm_priv {
 	struct platform_device *pdev;
@@ -92,6 +112,9 @@ struct papr_scm_priv {
 
 	/* Health information for the dimm */
 	u64 health_bitmap;
+
+	/* length of the stat buffer as expected by phyp */
+	size_t stat_buffer_len;
 };
 
 static LIST_HEAD(papr_nd_regions);
@@ -200,6 +223,79 @@ static int drc_pmem_query_n_bind(struct papr_scm_priv *p)
 	return drc_pmem_bind(p);
 }
 
+/*
+ * Query the Dimm performance stats from PHYP and copy them (if returned) to
+ * provided struct papr_scm_perf_stats instance 'stats' that can hold atleast
+ * (num_stats + header) bytes.
+ * - If buff_stats == NULL the return value is the size in byes of the buffer
+ * needed to hold all supported performance-statistics.
+ * - If buff_stats != NULL and num_stats == 0 then we copy all known
+ * performance-statistics to 'buff_stat' and expect to be large enough to
+ * hold them.
+ * - if buff_stats != NULL and num_stats > 0 then copy the requested
+ * performance-statistics to buff_stats.
+ */
+static ssize_t drc_pmem_query_stats(struct papr_scm_priv *p,
+				    struct papr_scm_perf_stats *buff_stats,
+				    unsigned int num_stats)
+{
+	unsigned long ret[PLPAR_HCALL_BUFSIZE];
+	size_t size;
+	s64 rc;
+
+	/* Setup the out buffer */
+	if (buff_stats) {
+		memcpy(buff_stats->eye_catcher,
+		       PAPR_SCM_PERF_STATS_EYECATCHER, 8);
+		buff_stats->stats_version =
+			cpu_to_be32(PAPR_SCM_PERF_STATS_VERSION);
+		buff_stats->num_statistics =
+			cpu_to_be32(num_stats);
+
+		/*
+		 * Calculate the buffer size based on num-stats provided
+		 * or use the prefetched max buffer length
+		 */
+		if (num_stats)
+			/* Calculate size from the num_stats */
+			size = sizeof(struct papr_scm_perf_stats) +
+				num_stats * sizeof(struct papr_scm_perf_stat);
+		else
+			size = p->stat_buffer_len;
+	} else {
+		/* In case of no out buffer ignore the size */
+		size = 0;
+	}
+
+	/* Do the HCALL asking PHYP for info */
+	rc = plpar_hcall(H_SCM_PERFORMANCE_STATS, ret, p->drc_index,
+			 buff_stats ? virt_to_phys(buff_stats) : 0,
+			 size);
+
+	/* Check if the error was due to an unknown stat-id */
+	if (rc == H_PARTIAL) {
+		dev_err(&p->pdev->dev,
+			"Unknown performance stats, Err:0x%016lX\n", ret[0]);
+		return -ENOENT;
+	} else if (rc != H_SUCCESS) {
+		dev_err(&p->pdev->dev,
+			"Failed to query performance stats, Err:%lld\n", rc);
+		return -EIO;
+
+	} else if (!size) {
+		/* Handle case where stat buffer size was requested */
+		dev_dbg(&p->pdev->dev,
+			"Performance stats size %ld\n", ret[0]);
+		return ret[0];
+	}
+
+	/* Successfully fetched the requested stats from phyp */
+	dev_dbg(&p->pdev->dev,
+		"Performance stats returned %d stats\n",
+		be32_to_cpu(buff_stats->num_statistics));
+	return 0;
+}
+
 /*
  * Issue hcall to retrieve dimm health info and populate papr_scm_priv with the
  * health information.
@@ -637,6 +733,48 @@ static int papr_scm_ndctl(struct nvdimm_bus_descriptor *nd_desc,
 	return 0;
 }
 
+static ssize_t perf_stats_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	int index, rc;
+	struct seq_buf s;
+	struct papr_scm_perf_stat *stat;
+	struct papr_scm_perf_stats *stats;
+	struct nvdimm *dimm = to_nvdimm(dev);
+	struct papr_scm_priv *p = nvdimm_provider_data(dimm);
+
+	if (!p->stat_buffer_len)
+		return -ENOENT;
+
+	/* Allocate the buffer for phyp where stats are written */
+	stats = kzalloc(p->stat_buffer_len, GFP_KERNEL);
+	if (!stats)
+		return -ENOMEM;
+
+	/* Ask phyp to return all dimm perf stats */
+	rc = drc_pmem_query_stats(p, stats, 0);
+	if (rc)
+		goto free_stats;
+	/*
+	 * Go through the returned output buffer and print stats and
+	 * values. Since stat_id is essentially a char string of
+	 * 8 bytes, simply use the string format specifier to print it.
+	 */
+	seq_buf_init(&s, buf, PAGE_SIZE);
+	for (index = 0, stat = stats->scm_statistic;
+	     index < be32_to_cpu(stats->num_statistics);
+	     ++index, ++stat) {
+		seq_buf_printf(&s, "%.8s = 0x%016llX\n",
+			       stat->stat_id,
+			       be64_to_cpu(stat->stat_val));
+	}
+
+free_stats:
+	kfree(stats);
+	return rc ? rc : seq_buf_used(&s);
+}
+DEVICE_ATTR_RO(perf_stats);
+
 static ssize_t flags_show(struct device *dev,
 			  struct device_attribute *attr, char *buf)
 {
@@ -682,6 +820,7 @@ DEVICE_ATTR_RO(flags);
 /* papr_scm specific dimm attributes */
 static struct attribute *papr_nd_attributes[] = {
 	&dev_attr_flags.attr,
+	&dev_attr_perf_stats.attr,
 	NULL,
 };
 
@@ -702,6 +841,7 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
 	struct nd_region_desc ndr_desc;
 	unsigned long dimm_flags;
 	int target_nid, online_nid;
+	ssize_t stat_size;
 
 	p->bus_desc.ndctl = papr_scm_ndctl;
 	p->bus_desc.module = THIS_MODULE;
@@ -769,6 +909,16 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
 	list_add_tail(&p->region_list, &papr_nd_regions);
 	mutex_unlock(&papr_ndr_lock);
 
+	/* Try retriving the stat buffer and see if its supported */
+	stat_size = drc_pmem_query_stats(p, NULL, 0);
+	if (stat_size > 0) {
+		p->stat_buffer_len = stat_size;
+		dev_dbg(&p->pdev->dev, "Max perf-stat size %lu-bytes\n",
+			p->stat_buffer_len);
+	} else {
+		dev_info(&p->pdev->dev, "Dimm performance stats unavailable\n");
+	}
+
 	return 0;
 
 err:	nvdimm_bus_unregister(p->bus);
-- 
2.26.2
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v4 2/2] powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric
  2020-07-31  6:41 [PATCH v4 0/2] powerpc/papr_scm: add support for reporting NVDIMM 'life_used_percentage' metric Vaibhav Jain
  2020-07-31  6:41 ` [PATCH v4 1/2] powerpc/papr_scm: Fetch nvdimm performance stats from PHYP Vaibhav Jain
@ 2020-07-31  6:41 ` Vaibhav Jain
  2020-07-31  7:14   ` Aneesh Kumar K.V
  2020-08-02 13:35 ` [PATCH v4 0/2] powerpc/papr_scm: add support for reporting NVDIMM 'life_used_percentage' metric Michael Ellerman
  2 siblings, 1 reply; 6+ messages in thread
From: Vaibhav Jain @ 2020-07-31  6:41 UTC (permalink / raw)
  To: linuxppc-dev, linux-nvdimm
  Cc: Vaibhav Jain, Aneesh Kumar K . V, Michael Ellerman

We add support for reporting 'fuel-gauge' NVDIMM metric via
PAPR_PDSM_HEALTH pdsm payload. 'fuel-gauge' metric indicates the usage
life remaining of a papr-scm compatible NVDIMM. PHYP exposes this
metric via the H_SCM_PERFORMANCE_STATS.

The metric value is returned from the pdsm by extending the return
payload 'struct nd_papr_pdsm_health' without breaking the ABI. A new
field 'dimm_fuel_gauge' to hold the metric value is introduced at the
end of the payload struct and its presence is indicated by by
extension flag PDSM_DIMM_HEALTH_RUN_GAUGE_VALID.

The patch introduces a new function papr_pdsm_fuel_gauge() that is
called from papr_pdsm_health(). If fetching NVDIMM performance stats
is supported then 'papr_pdsm_fuel_gauge()' allocated an output buffer
large enough to hold the performance stat and passes it to
drc_pmem_query_stats() that issues the HCALL to PHYP. The return value
of the stat is then populated in the 'struct
nd_papr_pdsm_health.dimm_fuel_gauge' field with extension flag
'PDSM_DIMM_HEALTH_RUN_GAUGE_VALID' set in 'struct
nd_papr_pdsm_health.extension_flags'

Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
---
Changelog:

v4:
* Moved a hunk from this patch to previous patch in the series.
  [ Aneesh ]

v3:
* Updated papr_pdsm_fuel_guage() to use the updated
  drc_pmem_query_stats() function.

Resend:
None

v2:
* Restructure code in papr_pdsm_fuel_gauge() to handle error case
first [ Ira ]
* Ignore the return value of papr_pdsm_fuel_gauge() in
papr_psdm_health() [ Ira ]
---
 arch/powerpc/include/uapi/asm/papr_pdsm.h |  9 +++++
 arch/powerpc/platforms/pseries/papr_scm.c | 49 +++++++++++++++++++++++
 2 files changed, 58 insertions(+)

diff --git a/arch/powerpc/include/uapi/asm/papr_pdsm.h b/arch/powerpc/include/uapi/asm/papr_pdsm.h
index 9ccecc1d6840..50ef95e2f5b1 100644
--- a/arch/powerpc/include/uapi/asm/papr_pdsm.h
+++ b/arch/powerpc/include/uapi/asm/papr_pdsm.h
@@ -72,6 +72,11 @@
 #define PAPR_PDSM_DIMM_CRITICAL      2
 #define PAPR_PDSM_DIMM_FATAL         3
 
+/* struct nd_papr_pdsm_health.extension_flags field flags */
+
+/* Indicate that the 'dimm_fuel_gauge' field is valid */
+#define PDSM_DIMM_HEALTH_RUN_GAUGE_VALID 1
+
 /*
  * Struct exchanged between kernel & ndctl in for PAPR_PDSM_HEALTH
  * Various flags indicate the health status of the dimm.
@@ -84,6 +89,7 @@
  * dimm_locked		: Contents of the dimm cant be modified until CEC reboot
  * dimm_encrypted	: Contents of dimm are encrypted.
  * dimm_health		: Dimm health indicator. One of PAPR_PDSM_DIMM_XXXX
+ * dimm_fuel_gauge	: Life remaining of DIMM as a percentage from 0-100
  */
 struct nd_papr_pdsm_health {
 	union {
@@ -96,6 +102,9 @@ struct nd_papr_pdsm_health {
 			__u8 dimm_locked;
 			__u8 dimm_encrypted;
 			__u16 dimm_health;
+
+			/* Extension flag PDSM_DIMM_HEALTH_RUN_GAUGE_VALID */
+			__u16 dimm_fuel_gauge;
 		};
 		__u8 buf[ND_PDSM_PAYLOAD_MAX_SIZE];
 	};
diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
index f37f3f70007d..f439f0dfea7d 100644
--- a/arch/powerpc/platforms/pseries/papr_scm.c
+++ b/arch/powerpc/platforms/pseries/papr_scm.c
@@ -518,6 +518,51 @@ static int is_cmd_valid(struct nvdimm *nvdimm, unsigned int cmd, void *buf,
 	return 0;
 }
 
+static int papr_pdsm_fuel_gauge(struct papr_scm_priv *p,
+				union nd_pdsm_payload *payload)
+{
+	int rc, size;
+	u64 statval;
+	struct papr_scm_perf_stat *stat;
+	struct papr_scm_perf_stats *stats;
+
+	/* Silently fail if fetching performance metrics isn't  supported */
+	if (!p->stat_buffer_len)
+		return 0;
+
+	/* Allocate request buffer enough to hold single performance stat */
+	size = sizeof(struct papr_scm_perf_stats) +
+		sizeof(struct papr_scm_perf_stat);
+
+	stats = kzalloc(size, GFP_KERNEL);
+	if (!stats)
+		return -ENOMEM;
+
+	stat = &stats->scm_statistic[0];
+	memcpy(&stat->stat_id, "MemLife ", sizeof(stat->stat_id));
+	stat->stat_val = 0;
+
+	/* Fetch the fuel gauge and populate it in payload */
+	rc = drc_pmem_query_stats(p, stats, 1);
+	if (rc < 0) {
+		dev_dbg(&p->pdev->dev, "Err(%d) fetching fuel gauge\n", rc);
+		goto free_stats;
+	}
+
+	statval = be64_to_cpu(stat->stat_val);
+	dev_dbg(&p->pdev->dev,
+		"Fetched fuel-gauge %llu", statval);
+	payload->health.extension_flags |=
+		PDSM_DIMM_HEALTH_RUN_GAUGE_VALID;
+	payload->health.dimm_fuel_gauge = statval;
+
+	rc = sizeof(struct nd_papr_pdsm_health);
+
+free_stats:
+	kfree(stats);
+	return rc;
+}
+
 /* Fetch the DIMM health info and populate it in provided package. */
 static int papr_pdsm_health(struct papr_scm_priv *p,
 			    union nd_pdsm_payload *payload)
@@ -558,6 +603,10 @@ static int papr_pdsm_health(struct papr_scm_priv *p,
 
 	/* struct populated hence can release the mutex now */
 	mutex_unlock(&p->health_mutex);
+
+	/* Populate the fuel gauge meter in the payload */
+	papr_pdsm_fuel_gauge(p, payload);
+
 	rc = sizeof(struct nd_papr_pdsm_health);
 
 out:
-- 
2.26.2
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v4 1/2] powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
  2020-07-31  6:41 ` [PATCH v4 1/2] powerpc/papr_scm: Fetch nvdimm performance stats from PHYP Vaibhav Jain
@ 2020-07-31  7:12   ` Aneesh Kumar K.V
  0 siblings, 0 replies; 6+ messages in thread
From: Aneesh Kumar K.V @ 2020-07-31  7:12 UTC (permalink / raw)
  To: Vaibhav Jain, linuxppc-dev, linux-nvdimm; +Cc: Vaibhav Jain, Michael Ellerman

Vaibhav Jain <vaibhav@linux.ibm.com> writes:

> Update papr_scm.c to query dimm performance statistics from PHYP via
> H_SCM_PERFORMANCE_STATS hcall and export them to user-space as PAPR
> specific NVDIMM attribute 'perf_stats' in sysfs. The patch also
> provide a sysfs ABI documentation for the stats being reported and
> their meanings.
>
> During NVDIMM probe time in papr_scm_nvdimm_init() a special variant
> of H_SCM_PERFORMANCE_STATS hcall is issued to check if collection of
> performance statistics is supported or not. If successful then a PHYP
> returns a maximum possible buffer length needed to read all
> performance stats. This returned value is stored in a per-nvdimm
> attribute 'stat_buffer_len'.
>
> The layout of request buffer for reading NVDIMM performance stats from
> PHYP is defined in 'struct papr_scm_perf_stats' and 'struct
> papr_scm_perf_stat'. These structs are used in newly introduced
> drc_pmem_query_stats() that issues the H_SCM_PERFORMANCE_STATS hcall.
>
> The sysfs access function perf_stats_show() uses value
> 'stat_buffer_len' to allocate a buffer large enough to hold all
> possible NVDIMM performance stats and passes it to
> drc_pmem_query_stats() to populate. Finally statistics reported in the
> buffer are formatted into the sysfs access function output buffer.
>
> Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
> ---
> Changelog:
>
> v4:
> * Fixed a build issue with this patch by moving a hunk from second
>   patch in series to this patch. [ Aneesh ]
>
> v3:
> * Updated drc_pmem_query_stats() to not require 'buff_size' and 'out'
>   args to the function. Instead 'buff_size' is calculated from
>   'num_stats' and instead of populating 'R4' in arg 'out' the value is
>   returned from the function in case 'R4' represents
>   'max-buffer-size'.
>
> Resend:
> None
>
> v2:
> * Updated 'struct papr_scm_perf_stats' and 'struct papr_scm_perf_stat'
> to use big-endian types. [ Aneesh ]
> * s/len_stat_buffer/stat_buffer_len/ [ Aneesh ]
> * s/statistics_id/stat_id/ , s/statistics_val/stat_val/ [ Aneesh ]
> * Conversion from Big endian to cpu endian happens later rather than
> just after its fetched from PHYP.
> * Changed a log statement to unambiguously report dimm performance
> stats are not available for the given nvdimm [ Ira ]
> * Restructed some code to handle error case first [ Ira ]
> ---
>  Documentation/ABI/testing/sysfs-bus-papr-pmem |  27 ++++
>  arch/powerpc/platforms/pseries/papr_scm.c     | 150 ++++++++++++++++++
>  2 files changed, 177 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-papr-pmem b/Documentation/ABI/testing/sysfs-bus-papr-pmem
> index 5b10d036a8d4..c1a67275c43f 100644
> --- a/Documentation/ABI/testing/sysfs-bus-papr-pmem
> +++ b/Documentation/ABI/testing/sysfs-bus-papr-pmem
> @@ -25,3 +25,30 @@ Description:
>  				  NVDIMM have been scrubbed.
>  		* "locked"	: Indicating that NVDIMM contents cant
>  				  be modified until next power cycle.
> +
> +What:		/sys/bus/nd/devices/nmemX/papr/perf_stats
> +Date:		May, 2020
> +KernelVersion:	v5.9
> +Contact:	linuxppc-dev <linuxppc-dev@lists.ozlabs.org>, linux-nvdimm@lists.01.org,
> +Description:
> +		(RO) Report various performance stats related to papr-scm NVDIMM
> +		device.  Each stat is reported on a new line with each line
> +		composed of a stat-identifier followed by it value. Below are
> +		currently known dimm performance stats which are reported:
> +
> +		* "CtlResCt" : Controller Reset Count
> +		* "CtlResTm" : Controller Reset Elapsed Time
> +		* "PonSecs " : Power-on Seconds
> +		* "MemLife " : Life Remaining
> +		* "CritRscU" : Critical Resource Utilization
> +		* "HostLCnt" : Host Load Count
> +		* "HostSCnt" : Host Store Count
> +		* "HostSDur" : Host Store Duration
> +		* "HostLDur" : Host Load Duration
> +		* "MedRCnt " : Media Read Count
> +		* "MedWCnt " : Media Write Count
> +		* "MedRDur " : Media Read Duration
> +		* "MedWDur " : Media Write Duration
> +		* "CchRHCnt" : Cache Read Hit Count
> +		* "CchWHCnt" : Cache Write Hit Count
> +		* "FastWCnt" : Fast Write Count
> \ No newline at end of file
> diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
> index 3d1235a76ba9..f37f3f70007d 100644
> --- a/arch/powerpc/platforms/pseries/papr_scm.c
> +++ b/arch/powerpc/platforms/pseries/papr_scm.c
> @@ -64,6 +64,26 @@
>  				    PAPR_PMEM_HEALTH_FATAL |	\
>  				    PAPR_PMEM_HEALTH_UNHEALTHY)
>  
> +#define PAPR_SCM_PERF_STATS_EYECATCHER __stringify(SCMSTATS)
> +#define PAPR_SCM_PERF_STATS_VERSION 0x1
> +
> +/* Struct holding a single performance metric */
> +struct papr_scm_perf_stat {
> +	u8 stat_id[8];
> +	__be64 stat_val;
> +} __packed;
> +
> +/* Struct exchanged between kernel and PHYP for fetching drc perf stats */
> +struct papr_scm_perf_stats {
> +	u8 eye_catcher[8];
> +	/* Should be PAPR_SCM_PERF_STATS_VERSION */
> +	__be32 stats_version;
> +	/* Number of stats following */
> +	__be32 num_statistics;
> +	/* zero or more performance matrics */
> +	struct papr_scm_perf_stat scm_statistic[];
> +} __packed;
> +
>  /* private struct associated with each region */
>  struct papr_scm_priv {
>  	struct platform_device *pdev;
> @@ -92,6 +112,9 @@ struct papr_scm_priv {
>  
>  	/* Health information for the dimm */
>  	u64 health_bitmap;
> +
> +	/* length of the stat buffer as expected by phyp */
> +	size_t stat_buffer_len;
>  };
>  
>  static LIST_HEAD(papr_nd_regions);
> @@ -200,6 +223,79 @@ static int drc_pmem_query_n_bind(struct papr_scm_priv *p)
>  	return drc_pmem_bind(p);
>  }
>  
> +/*
> + * Query the Dimm performance stats from PHYP and copy them (if returned) to
> + * provided struct papr_scm_perf_stats instance 'stats' that can hold atleast
> + * (num_stats + header) bytes.
> + * - If buff_stats == NULL the return value is the size in byes of the buffer
> + * needed to hold all supported performance-statistics.
> + * - If buff_stats != NULL and num_stats == 0 then we copy all known
> + * performance-statistics to 'buff_stat' and expect to be large enough to
> + * hold them.
> + * - if buff_stats != NULL and num_stats > 0 then copy the requested
> + * performance-statistics to buff_stats.
> + */
> +static ssize_t drc_pmem_query_stats(struct papr_scm_priv *p,
> +				    struct papr_scm_perf_stats *buff_stats,
> +				    unsigned int num_stats)
> +{
> +	unsigned long ret[PLPAR_HCALL_BUFSIZE];
> +	size_t size;
> +	s64 rc;
> +
> +	/* Setup the out buffer */
> +	if (buff_stats) {
> +		memcpy(buff_stats->eye_catcher,
> +		       PAPR_SCM_PERF_STATS_EYECATCHER, 8);
> +		buff_stats->stats_version =
> +			cpu_to_be32(PAPR_SCM_PERF_STATS_VERSION);
> +		buff_stats->num_statistics =
> +			cpu_to_be32(num_stats);
> +
> +		/*
> +		 * Calculate the buffer size based on num-stats provided
> +		 * or use the prefetched max buffer length
> +		 */
> +		if (num_stats)
> +			/* Calculate size from the num_stats */
> +			size = sizeof(struct papr_scm_perf_stats) +
> +				num_stats * sizeof(struct papr_scm_perf_stat);
> +		else
> +			size = p->stat_buffer_len;
> +	} else {
> +		/* In case of no out buffer ignore the size */
> +		size = 0;
> +	}
> +
> +	/* Do the HCALL asking PHYP for info */
> +	rc = plpar_hcall(H_SCM_PERFORMANCE_STATS, ret, p->drc_index,
> +			 buff_stats ? virt_to_phys(buff_stats) : 0,
> +			 size);
> +
> +	/* Check if the error was due to an unknown stat-id */
> +	if (rc == H_PARTIAL) {
> +		dev_err(&p->pdev->dev,
> +			"Unknown performance stats, Err:0x%016lX\n", ret[0]);
> +		return -ENOENT;
> +	} else if (rc != H_SUCCESS) {
> +		dev_err(&p->pdev->dev,
> +			"Failed to query performance stats, Err:%lld\n", rc);
> +		return -EIO;
> +
> +	} else if (!size) {
> +		/* Handle case where stat buffer size was requested */
> +		dev_dbg(&p->pdev->dev,
> +			"Performance stats size %ld\n", ret[0]);
> +		return ret[0];
> +	}
> +
> +	/* Successfully fetched the requested stats from phyp */
> +	dev_dbg(&p->pdev->dev,
> +		"Performance stats returned %d stats\n",
> +		be32_to_cpu(buff_stats->num_statistics));
> +	return 0;
> +}
> +
>  /*
>   * Issue hcall to retrieve dimm health info and populate papr_scm_priv with the
>   * health information.
> @@ -637,6 +733,48 @@ static int papr_scm_ndctl(struct nvdimm_bus_descriptor *nd_desc,
>  	return 0;
>  }
>  
> +static ssize_t perf_stats_show(struct device *dev,
> +			       struct device_attribute *attr, char *buf)
> +{
> +	int index, rc;
> +	struct seq_buf s;
> +	struct papr_scm_perf_stat *stat;
> +	struct papr_scm_perf_stats *stats;
> +	struct nvdimm *dimm = to_nvdimm(dev);
> +	struct papr_scm_priv *p = nvdimm_provider_data(dimm);
> +
> +	if (!p->stat_buffer_len)
> +		return -ENOENT;
> +
> +	/* Allocate the buffer for phyp where stats are written */
> +	stats = kzalloc(p->stat_buffer_len, GFP_KERNEL);
> +	if (!stats)
> +		return -ENOMEM;
> +
> +	/* Ask phyp to return all dimm perf stats */
> +	rc = drc_pmem_query_stats(p, stats, 0);
> +	if (rc)
> +		goto free_stats;

So we end up making a HCALL for each read of the sysfs file? You do
throttle that for PAPR_HEALTH hcall (flags sysfs file). Do we need to do
that here? If not should we make this CAP_SYS_ADMIN?  You can possibly
add is_visible callback to papr group and then restrict this all to
CAP_SYS_ADMIN?


> +	/*
> +	 * Go through the returned output buffer and print stats and
> +	 * values. Since stat_id is essentially a char string of
> +	 * 8 bytes, simply use the string format specifier to print it.
> +	 */
> +	seq_buf_init(&s, buf, PAGE_SIZE);
> +	for (index = 0, stat = stats->scm_statistic;
> +	     index < be32_to_cpu(stats->num_statistics);
> +	     ++index, ++stat) {
> +		seq_buf_printf(&s, "%.8s = 0x%016llX\n",
> +			       stat->stat_id,
> +			       be64_to_cpu(stat->stat_val));
> +	}
> +
> +free_stats:
> +	kfree(stats);
> +	return rc ? rc : seq_buf_used(&s);
> +}
> +DEVICE_ATTR_RO(perf_stats);
> +
>  static ssize_t flags_show(struct device *dev,
>  			  struct device_attribute *attr, char *buf)
>  {
> @@ -682,6 +820,7 @@ DEVICE_ATTR_RO(flags);
>  /* papr_scm specific dimm attributes */
>  static struct attribute *papr_nd_attributes[] = {
>  	&dev_attr_flags.attr,
> +	&dev_attr_perf_stats.attr,
>  	NULL,
>  };
>  
> @@ -702,6 +841,7 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
>  	struct nd_region_desc ndr_desc;
>  	unsigned long dimm_flags;
>  	int target_nid, online_nid;
> +	ssize_t stat_size;
>  
>  	p->bus_desc.ndctl = papr_scm_ndctl;
>  	p->bus_desc.module = THIS_MODULE;
> @@ -769,6 +909,16 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
>  	list_add_tail(&p->region_list, &papr_nd_regions);
>  	mutex_unlock(&papr_ndr_lock);
>  
> +	/* Try retriving the stat buffer and see if its supported */
> +	stat_size = drc_pmem_query_stats(p, NULL, 0);
> +	if (stat_size > 0) {
> +		p->stat_buffer_len = stat_size;
> +		dev_dbg(&p->pdev->dev, "Max perf-stat size %lu-bytes\n",
> +			p->stat_buffer_len);
> +	} else {
> +		dev_info(&p->pdev->dev, "Dimm performance stats unavailable\n");
> +	}
> +
>  	return 0;
>  
>  err:	nvdimm_bus_unregister(p->bus);
> -- 
> 2.26.2
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v4 2/2] powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric
  2020-07-31  6:41 ` [PATCH v4 2/2] powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric Vaibhav Jain
@ 2020-07-31  7:14   ` Aneesh Kumar K.V
  0 siblings, 0 replies; 6+ messages in thread
From: Aneesh Kumar K.V @ 2020-07-31  7:14 UTC (permalink / raw)
  To: Vaibhav Jain, linuxppc-dev, linux-nvdimm; +Cc: Vaibhav Jain, Michael Ellerman

Vaibhav Jain <vaibhav@linux.ibm.com> writes:

> We add support for reporting 'fuel-gauge' NVDIMM metric via
> PAPR_PDSM_HEALTH pdsm payload. 'fuel-gauge' metric indicates the usage
> life remaining of a papr-scm compatible NVDIMM. PHYP exposes this
> metric via the H_SCM_PERFORMANCE_STATS.
>
> The metric value is returned from the pdsm by extending the return
> payload 'struct nd_papr_pdsm_health' without breaking the ABI. A new
> field 'dimm_fuel_gauge' to hold the metric value is introduced at the
> end of the payload struct and its presence is indicated by by
> extension flag PDSM_DIMM_HEALTH_RUN_GAUGE_VALID.
>
> The patch introduces a new function papr_pdsm_fuel_gauge() that is
> called from papr_pdsm_health(). If fetching NVDIMM performance stats
> is supported then 'papr_pdsm_fuel_gauge()' allocated an output buffer
> large enough to hold the performance stat and passes it to
> drc_pmem_query_stats() that issues the HCALL to PHYP. The return value
> of the stat is then populated in the 'struct
> nd_papr_pdsm_health.dimm_fuel_gauge' field with extension flag
> 'PDSM_DIMM_HEALTH_RUN_GAUGE_VALID' set in 'struct
> nd_papr_pdsm_health.extension_flags'
>

Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>

> Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
> ---
> Changelog:
>
> v4:
> * Moved a hunk from this patch to previous patch in the series.
>   [ Aneesh ]
>
> v3:
> * Updated papr_pdsm_fuel_guage() to use the updated
>   drc_pmem_query_stats() function.
>
> Resend:
> None
>
> v2:
> * Restructure code in papr_pdsm_fuel_gauge() to handle error case
> first [ Ira ]
> * Ignore the return value of papr_pdsm_fuel_gauge() in
> papr_psdm_health() [ Ira ]
> ---
>  arch/powerpc/include/uapi/asm/papr_pdsm.h |  9 +++++
>  arch/powerpc/platforms/pseries/papr_scm.c | 49 +++++++++++++++++++++++
>  2 files changed, 58 insertions(+)
>
> diff --git a/arch/powerpc/include/uapi/asm/papr_pdsm.h b/arch/powerpc/include/uapi/asm/papr_pdsm.h
> index 9ccecc1d6840..50ef95e2f5b1 100644
> --- a/arch/powerpc/include/uapi/asm/papr_pdsm.h
> +++ b/arch/powerpc/include/uapi/asm/papr_pdsm.h
> @@ -72,6 +72,11 @@
>  #define PAPR_PDSM_DIMM_CRITICAL      2
>  #define PAPR_PDSM_DIMM_FATAL         3
>  
> +/* struct nd_papr_pdsm_health.extension_flags field flags */
> +
> +/* Indicate that the 'dimm_fuel_gauge' field is valid */
> +#define PDSM_DIMM_HEALTH_RUN_GAUGE_VALID 1
> +
>  /*
>   * Struct exchanged between kernel & ndctl in for PAPR_PDSM_HEALTH
>   * Various flags indicate the health status of the dimm.
> @@ -84,6 +89,7 @@
>   * dimm_locked		: Contents of the dimm cant be modified until CEC reboot
>   * dimm_encrypted	: Contents of dimm are encrypted.
>   * dimm_health		: Dimm health indicator. One of PAPR_PDSM_DIMM_XXXX
> + * dimm_fuel_gauge	: Life remaining of DIMM as a percentage from 0-100
>   */
>  struct nd_papr_pdsm_health {
>  	union {
> @@ -96,6 +102,9 @@ struct nd_papr_pdsm_health {
>  			__u8 dimm_locked;
>  			__u8 dimm_encrypted;
>  			__u16 dimm_health;
> +
> +			/* Extension flag PDSM_DIMM_HEALTH_RUN_GAUGE_VALID */
> +			__u16 dimm_fuel_gauge;
>  		};
>  		__u8 buf[ND_PDSM_PAYLOAD_MAX_SIZE];
>  	};
> diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
> index f37f3f70007d..f439f0dfea7d 100644
> --- a/arch/powerpc/platforms/pseries/papr_scm.c
> +++ b/arch/powerpc/platforms/pseries/papr_scm.c
> @@ -518,6 +518,51 @@ static int is_cmd_valid(struct nvdimm *nvdimm, unsigned int cmd, void *buf,
>  	return 0;
>  }
>  
> +static int papr_pdsm_fuel_gauge(struct papr_scm_priv *p,
> +				union nd_pdsm_payload *payload)
> +{
> +	int rc, size;
> +	u64 statval;
> +	struct papr_scm_perf_stat *stat;
> +	struct papr_scm_perf_stats *stats;
> +
> +	/* Silently fail if fetching performance metrics isn't  supported */
> +	if (!p->stat_buffer_len)
> +		return 0;
> +
> +	/* Allocate request buffer enough to hold single performance stat */
> +	size = sizeof(struct papr_scm_perf_stats) +
> +		sizeof(struct papr_scm_perf_stat);
> +
> +	stats = kzalloc(size, GFP_KERNEL);
> +	if (!stats)
> +		return -ENOMEM;
> +
> +	stat = &stats->scm_statistic[0];
> +	memcpy(&stat->stat_id, "MemLife ", sizeof(stat->stat_id));
> +	stat->stat_val = 0;
> +
> +	/* Fetch the fuel gauge and populate it in payload */
> +	rc = drc_pmem_query_stats(p, stats, 1);
> +	if (rc < 0) {
> +		dev_dbg(&p->pdev->dev, "Err(%d) fetching fuel gauge\n", rc);
> +		goto free_stats;
> +	}
> +
> +	statval = be64_to_cpu(stat->stat_val);
> +	dev_dbg(&p->pdev->dev,
> +		"Fetched fuel-gauge %llu", statval);
> +	payload->health.extension_flags |=
> +		PDSM_DIMM_HEALTH_RUN_GAUGE_VALID;
> +	payload->health.dimm_fuel_gauge = statval;
> +
> +	rc = sizeof(struct nd_papr_pdsm_health);
> +
> +free_stats:
> +	kfree(stats);
> +	return rc;
> +}
> +
>  /* Fetch the DIMM health info and populate it in provided package. */
>  static int papr_pdsm_health(struct papr_scm_priv *p,
>  			    union nd_pdsm_payload *payload)
> @@ -558,6 +603,10 @@ static int papr_pdsm_health(struct papr_scm_priv *p,
>  
>  	/* struct populated hence can release the mutex now */
>  	mutex_unlock(&p->health_mutex);
> +
> +	/* Populate the fuel gauge meter in the payload */
> +	papr_pdsm_fuel_gauge(p, payload);
> +
>  	rc = sizeof(struct nd_papr_pdsm_health);
>  
>  out:
> -- 
> 2.26.2
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v4 0/2] powerpc/papr_scm: add support for reporting NVDIMM 'life_used_percentage' metric
  2020-07-31  6:41 [PATCH v4 0/2] powerpc/papr_scm: add support for reporting NVDIMM 'life_used_percentage' metric Vaibhav Jain
  2020-07-31  6:41 ` [PATCH v4 1/2] powerpc/papr_scm: Fetch nvdimm performance stats from PHYP Vaibhav Jain
  2020-07-31  6:41 ` [PATCH v4 2/2] powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric Vaibhav Jain
@ 2020-08-02 13:35 ` Michael Ellerman
  2 siblings, 0 replies; 6+ messages in thread
From: Michael Ellerman @ 2020-08-02 13:35 UTC (permalink / raw)
  To: linuxppc-dev, Vaibhav Jain, linux-nvdimm
  Cc: Michael Ellerman, Aneesh Kumar K . V

On Fri, 31 Jul 2020 12:11:51 +0530, Vaibhav Jain wrote:
> Changes since v3[1]:
> 
> * Fixed a rebase issue pointed out by Aneesh in first patch in the series.
> 
> [1] https://lore.kernel.org/linux-nvdimm/20200730121303.134230-1-vaibhav@linux.ibm.com

Applied to powerpc/next.

[1/2] powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
      https://git.kernel.org/powerpc/c/2d02bf835e5731de632c8a13567905fa7c0da01c
[2/2] powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric
      https://git.kernel.org/powerpc/c/af0870c4e75655b1931d0a5ffde2f448a2794362

cheers
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, back to index

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-31  6:41 [PATCH v4 0/2] powerpc/papr_scm: add support for reporting NVDIMM 'life_used_percentage' metric Vaibhav Jain
2020-07-31  6:41 ` [PATCH v4 1/2] powerpc/papr_scm: Fetch nvdimm performance stats from PHYP Vaibhav Jain
2020-07-31  7:12   ` Aneesh Kumar K.V
2020-07-31  6:41 ` [PATCH v4 2/2] powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric Vaibhav Jain
2020-07-31  7:14   ` Aneesh Kumar K.V
2020-08-02 13:35 ` [PATCH v4 0/2] powerpc/papr_scm: add support for reporting NVDIMM 'life_used_percentage' metric Michael Ellerman

Linux-NVDIMM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-nvdimm/0 linux-nvdimm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-nvdimm linux-nvdimm/ https://lore.kernel.org/linux-nvdimm \
		linux-nvdimm@lists.01.org
	public-inbox-index linux-nvdimm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.01.lists.linux-nvdimm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git