linux-nvme.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] nvme: Add hardware monitoring support
@ 2019-10-28  2:41 Guenter Roeck
  2019-10-28  7:39 ` Christoph Hellwig
  2019-10-28 18:01 ` Andrey Smirnov
  0 siblings, 2 replies; 5+ messages in thread
From: Guenter Roeck @ 2019-10-28  2:41 UTC (permalink / raw)
  To: Keith Busch
  Cc: Sagi Grimberg, linux-kernel, linux-nvme, Jens Axboe, Chris Healy,
	Christoph Hellwig, Guenter Roeck

nvme devices report temperature information in the controller information
(for limits) and in the smart log. Currently, the only means to retrieve
this information is the nvme command line interface, which requires
super-user privileges.

At the same time, it would be desirable to use NVME temperature information
for thermal control.

This patch adds support to read NVME temperatures from the kernel using the
hwmon API and adds temperature zones for NVME drives. The thermal subsystem
can use this information to set thermal policies, and userspace can access
it using libsensors and/or the "sensors" command.

Example output from the "sensors" command:

nvme0-pci-0100
Adapter: PCI adapter
Composite:    +39.0°C  (high = +85.0°C, crit = +85.0°C)
Sensor 1:     +39.0°C
Sensor 2:     +41.0°C

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/nvme/host/Kconfig      |  10 +++
 drivers/nvme/host/Makefile     |   1 +
 drivers/nvme/host/core.c       |   5 ++
 drivers/nvme/host/nvme-hwmon.c | 160 +++++++++++++++++++++++++++++++++
 drivers/nvme/host/nvme.h       |   8 ++
 5 files changed, 184 insertions(+)
 create mode 100644 drivers/nvme/host/nvme-hwmon.c

diff --git a/drivers/nvme/host/Kconfig b/drivers/nvme/host/Kconfig
index 2b36f052bfb9..aeb49e16e386 100644
--- a/drivers/nvme/host/Kconfig
+++ b/drivers/nvme/host/Kconfig
@@ -23,6 +23,16 @@ config NVME_MULTIPATH
 	   /dev/nvmeXnY device will show up for each NVMe namespaces,
 	   even if it is accessible through multiple controllers.
 
+config NVME_HWMON
+	bool "NVME hardware monitoring"
+	depends on (NVME_CORE=y && HWMON=y) || (NVME_CORE=m && HWMON)
+	help
+	  This provides support for NVME hardware monitoring. If enabled,
+	  a hardware monitoring device will be created for each NVME drive
+	  in the system.
+
+	  If unsure, say N.
+
 config NVME_FABRICS
 	tristate
 
diff --git a/drivers/nvme/host/Makefile b/drivers/nvme/host/Makefile
index 8a4b671c5f0c..03de4797a877 100644
--- a/drivers/nvme/host/Makefile
+++ b/drivers/nvme/host/Makefile
@@ -14,6 +14,7 @@ nvme-core-$(CONFIG_TRACING)		+= trace.o
 nvme-core-$(CONFIG_NVME_MULTIPATH)	+= multipath.o
 nvme-core-$(CONFIG_NVM)			+= lightnvm.o
 nvme-core-$(CONFIG_FAULT_INJECTION_DEBUG_FS)	+= fault_inject.o
+nvme-core-$(CONFIG_NVME_HWMON)		+= nvme-hwmon.o
 
 nvme-y					+= pci.o
 
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index fa7ba09dca77..fc1d4b146717 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2796,6 +2796,9 @@ int nvme_init_identify(struct nvme_ctrl *ctrl)
 	ctrl->oncs = le16_to_cpu(id->oncs);
 	ctrl->mtfa = le16_to_cpu(id->mtfa);
 	ctrl->oaes = le32_to_cpu(id->oaes);
+	ctrl->wctemp = le16_to_cpu(id->wctemp);
+	ctrl->cctemp = le16_to_cpu(id->cctemp);
+
 	atomic_set(&ctrl->abort_limit, id->acl + 1);
 	ctrl->vwc = id->vwc;
 	if (id->mdts)
@@ -2897,6 +2900,8 @@ int nvme_init_identify(struct nvme_ctrl *ctrl)
 
 	ctrl->identified = true;
 
+	nvme_hwmon_init(ctrl);
+
 	return 0;
 
 out_free:
diff --git a/drivers/nvme/host/nvme-hwmon.c b/drivers/nvme/host/nvme-hwmon.c
new file mode 100644
index 000000000000..f19098bc3228
--- /dev/null
+++ b/drivers/nvme/host/nvme-hwmon.c
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NVM Express hardware monitoring support
+ * Copyright (c) 2019, Guenter Roeck
+ */
+
+#include <linux/hwmon.h>
+
+#include "nvme.h"
+
+struct nvme_hwmon_data {
+	struct nvme_ctrl *ctrl;
+	struct nvme_smart_log log;
+};
+
+static int nvme_hwmon_get_smart_log(struct nvme_hwmon_data *data)
+{
+	return nvme_get_log(data->ctrl, NVME_NSID_ALL, NVME_LOG_SMART, 0,
+			    &data->log, sizeof(data->log), 0);
+}
+
+static int nvme_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
+			   u32 attr, int channel, long *val)
+{
+	struct nvme_hwmon_data *data = dev_get_drvdata(dev);
+	struct nvme_smart_log *log = &data->log;
+	int err;
+	int temp;
+
+	err = nvme_hwmon_get_smart_log(data);
+	if (err)
+		return err < 0 ? err : -EPROTO;
+
+	switch (attr) {
+	case hwmon_temp_max:
+		*val = (data->ctrl->wctemp - 273) * 1000;
+		break;
+	case hwmon_temp_crit:
+		*val = (data->ctrl->cctemp - 273) * 1000;
+		break;
+	case hwmon_temp_input:
+		if (!channel)
+			temp = le16_to_cpup((__le16 *)log->temperature);
+		else
+			temp = le16_to_cpu(log->temp_sensor[channel - 1]);
+		*val = (temp - 273) * 1000;
+		break;
+	case hwmon_temp_crit_alarm:
+		*val = !!(log->critical_warning & NVME_SMART_CRIT_TEMPERATURE);
+		break;
+	default:
+		err = -EOPNOTSUPP;
+		break;
+	}
+	return err;
+}
+
+static const char * const nvme_hwmon_sensor_names[] = {
+	"Composite",
+	"Sensor 1",
+	"Sensor 2",
+	"Sensor 3",
+	"Sensor 4",
+	"Sensor 5",
+	"Sensor 6",
+	"Sensor 7",
+	"Sensor 8",
+};
+
+static int nvme_hwmon_read_string(struct device *dev,
+				  enum hwmon_sensor_types type, u32 attr,
+				  int channel, const char **str)
+{
+	*str = nvme_hwmon_sensor_names[channel];
+	return 0;
+}
+
+static umode_t nvme_hwmon_is_visible(const void *_data,
+				     enum hwmon_sensor_types type,
+				     u32 attr, int channel)
+{
+	const struct nvme_hwmon_data *data = _data;
+
+	switch (attr) {
+	case hwmon_temp_crit:
+		if (!channel && data->ctrl->cctemp)
+			return 0444;
+		break;
+	case hwmon_temp_max:
+		if (!channel && data->ctrl->wctemp)
+			return 0444;
+		break;
+	case hwmon_temp_crit_alarm:
+		if (!channel)
+			return 0444;
+		break;
+	case hwmon_temp_input:
+	case hwmon_temp_label:
+		if (!channel || data->log.temp_sensor[channel - 1])
+			return 0444;
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static const struct hwmon_channel_info *nvme_hwmon_info[] = {
+	HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+				HWMON_T_LABEL | HWMON_T_CRIT_ALARM,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL),
+	NULL
+};
+
+static const struct hwmon_ops nvme_hwmon_ops = {
+	.is_visible = nvme_hwmon_is_visible,
+	.read = nvme_hwmon_read,
+	.read_string = nvme_hwmon_read_string,
+};
+
+static const struct hwmon_chip_info nvme_hwmon_chip_info = {
+	.ops = &nvme_hwmon_ops,
+	.info = nvme_hwmon_info,
+};
+
+void nvme_hwmon_init(struct nvme_ctrl *ctrl)
+{
+	struct device *dev = ctrl->device;
+	struct nvme_hwmon_data *data;
+	struct device *hwmon;
+	int err;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return;
+
+	data->ctrl = ctrl;
+
+	err = nvme_hwmon_get_smart_log(data);
+	if (err) {
+		dev_warn(dev, "Failed to read smart log (error %d)\n", err);
+		return;
+	}
+
+	hwmon = devm_hwmon_device_register_with_info(dev, dev_name(dev),
+						     data,
+						     &nvme_hwmon_chip_info,
+						     NULL);
+	if (IS_ERR(hwmon))
+		dev_warn(dev, "Failed to instantiate hwmon device\n");
+}
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 22e8401352c2..e6460c1216bc 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -231,6 +231,8 @@ struct nvme_ctrl {
 	u16 kas;
 	u8 npss;
 	u8 apsta;
+	u16 wctemp;
+	u16 cctemp;
 	u32 oaes;
 	u32 aen_result;
 	u32 ctratt;
@@ -652,4 +654,10 @@ static inline struct nvme_ns *nvme_get_ns_from_dev(struct device *dev)
 	return dev_to_disk(dev)->private_data;
 }
 
+#if IS_ENABLED(CONFIG_NVME_HWMON)
+void nvme_hwmon_init(struct nvme_ctrl *ctrl);
+#else
+static inline void nvme_hwmon_init(struct nvme_ctrl *ctrl) { }
+#endif
+
 #endif /* _NVME_H */
-- 
2.17.1


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2019-10-28 18:01 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-28  2:41 [PATCH] nvme: Add hardware monitoring support Guenter Roeck
2019-10-28  7:39 ` Christoph Hellwig
2019-10-28  8:08   ` Keith Busch
2019-10-28 13:27     ` Guenter Roeck
2019-10-28 18:01 ` Andrey Smirnov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).