Linux-NVME Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] nvmet: check sscanf value for subsys serial attr
@ 2019-11-21 20:31 Chaitanya Kulkarni
  2019-11-26 16:50 ` Christoph Hellwig
  0 siblings, 1 reply; 3+ messages in thread
From: Chaitanya Kulkarni @ 2019-11-21 20:31 UTC (permalink / raw)
  To: linux-nvme; +Cc: Chaitanya Kulkarni

For nvmet in configfs.c we check return values for all the sscanf()
calls. Add similar check into the nvmet_subsys_attr_serial_store().

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
---
 drivers/nvme/target/configfs.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c
index 98613a45bd3b..cc1fd36bf71e 100644
--- a/drivers/nvme/target/configfs.c
+++ b/drivers/nvme/target/configfs.c
@@ -853,12 +853,14 @@ static ssize_t nvmet_subsys_attr_serial_store(struct config_item *item,
 					      const char *page, size_t count)
 {
 	struct nvmet_subsys *subsys = to_subsys(item);
+	int ret = 0;
 
 	down_write(&nvmet_config_sem);
-	sscanf(page, "%llx\n", &subsys->serial);
+	if (sscanf(page, "%llx\n", &subsys->serial) != 1)
+		ret = -EINVAL;
 	up_write(&nvmet_config_sem);
 
-	return count;
+	return ret ? ret : count;
 }
 CONFIGFS_ATTR(nvmet_subsys_, attr_serial);
 
-- 
2.22.1


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-21 20:31 [PATCH] nvmet: check sscanf value for subsys serial attr Chaitanya Kulkarni
2019-11-26 16:50 ` Christoph Hellwig
2019-11-27  6:13   ` Chaitanya Kulkarni

Linux-NVME Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-nvme/0 linux-nvme/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-nvme linux-nvme/ https://lore.kernel.org/linux-nvme \
		linux-nvme@lists.infradead.org
	public-inbox-index linux-nvme

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-nvme


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git