Linux-NVME Archive on lore.kernel.org
 help / color / Atom feed
From: Max Gurtovoy <maxg@mellanox.com>
To: linux-nvme@lists.infradead.org, kbusch@kernel.org, hch@lst.de,
	sagi@grimberg.me, martin.petersen@oracle.com
Cc: axboe@kernel.dk, vladimirk@mellanox.com, shlomin@mellanox.com,
	israelr@mellanox.com, idanb@mellanox.com, oren@mellanox.com,
	maxg@mellanox.com
Subject: [PATCH 01/16] nvme: Introduce namespace features flag
Date: Mon,  2 Dec 2019 16:47:57 +0200
Message-ID: <20191202144812.147686-3-maxg@mellanox.com> (raw)
In-Reply-To: <20191202144812.147686-1-maxg@mellanox.com>

From: Israel Rukshin <israelr@mellanox.com>

This patch is a preparation for adding PI support for fabrics drivers
that will use an extended LBA format for metadata.

Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
---
 drivers/nvme/host/core.c | 40 +++++++++++++++++++++++++++-------------
 drivers/nvme/host/nvme.h |  6 +++++-
 2 files changed, 32 insertions(+), 14 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index e6ee34376c5e..2e027627ab58 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -209,11 +209,6 @@ static int nvme_delete_ctrl_sync(struct nvme_ctrl *ctrl)
 	return ret;
 }
 
-static inline bool nvme_ns_has_pi(struct nvme_ns *ns)
-{
-	return ns->pi_type && ns->ms == sizeof(struct t10_pi_tuple);
-}
-
 static blk_status_t nvme_error_status(u16 status)
 {
 	switch (status & 0x7ff) {
@@ -473,6 +468,7 @@ static inline void nvme_clear_nvme_request(struct request *req)
 	if (!(req->rq_flags & RQF_DONTPREP)) {
 		nvme_req(req)->retries = 0;
 		nvme_req(req)->flags = 0;
+		nvme_req(req)->has_pi = false;
 		req->rq_flags |= RQF_DONTPREP;
 	}
 }
@@ -706,6 +702,7 @@ static inline blk_status_t nvme_setup_rw(struct nvme_ns *ns,
 		nvme_assign_write_stream(ctrl, req, &control, &dsmgmt);
 
 	if (ns->ms) {
+		nvme_req(req)->has_pi = ns->features & NVME_NS_DIF_SUPPORTED;
 		/*
 		 * If formated with metadata, the block layer always provides a
 		 * metadata buffer if CONFIG_BLK_DEV_INTEGRITY is enabled.  Else
@@ -713,7 +710,7 @@ static inline blk_status_t nvme_setup_rw(struct nvme_ns *ns,
 		 * namespace capacity to zero to prevent any I/O.
 		 */
 		if (!blk_integrity_rq(req)) {
-			if (WARN_ON_ONCE(!nvme_ns_has_pi(ns)))
+			if (WARN_ON_ONCE(!nvme_req(req)->has_pi))
 				return BLK_STS_NOTSUPP;
 			control |= NVME_RW_PRINFO_PRACT;
 		}
@@ -1271,7 +1268,7 @@ static int nvme_submit_io(struct nvme_ns *ns, struct nvme_user_io __user *uio)
 	meta_len = (io.nblocks + 1) * ns->ms;
 	metadata = (void __user *)(uintptr_t)io.metadata;
 
-	if (ns->ext) {
+	if (ns->features & NVME_NS_EXT_LBAS) {
 		length += meta_len;
 		meta_len = 0;
 	} else if (meta_len) {
@@ -1799,10 +1796,10 @@ static void nvme_update_disk_info(struct gendisk *disk,
 	blk_queue_io_min(disk->queue, phys_bs);
 	blk_queue_io_opt(disk->queue, io_opt);
 
-	if (ns->ms && !ns->ext &&
-	    (ns->ctrl->ops->flags & NVME_F_METADATA_SUPPORTED))
+	if (ns->features & NVME_NS_DIX_SUPPORTED)
 		nvme_init_integrity(disk, ns->ms, ns->pi_type);
-	if ((ns->ms && !nvme_ns_has_pi(ns) && !blk_get_integrity(disk)) ||
+	if ((ns->ms && !(ns->features & NVME_NS_DIF_SUPPORTED) &&
+	     !blk_get_integrity(disk)) ||
 	    ns->lba_shift > PAGE_SHIFT)
 		capacity = 0;
 
@@ -1832,12 +1829,29 @@ static void __nvme_revalidate_disk(struct gendisk *disk, struct nvme_id_ns *id)
 		ns->lba_shift = 9;
 	ns->noiob = le16_to_cpu(id->noiob);
 	ns->ms = le16_to_cpu(id->lbaf[id->flbas & NVME_NS_FLBAS_LBA_MASK].ms);
-	ns->ext = ns->ms && (id->flbas & NVME_NS_FLBAS_META_EXT);
+	ns->features = 0;
 	/* the PI implementation requires metadata equal t10 pi tuple size */
-	if (ns->ms == sizeof(struct t10_pi_tuple))
+	if (ns->ms == sizeof(struct t10_pi_tuple)) {
 		ns->pi_type = id->dps & NVME_NS_DPS_PI_MASK;
-	else
+		if (ns->pi_type)
+			ns->features |= NVME_NS_DIF_SUPPORTED;
+	} else {
 		ns->pi_type = 0;
+	}
+
+	if (ns->ms) {
+		if (id->flbas & NVME_NS_FLBAS_META_EXT)
+			ns->features |= NVME_NS_EXT_LBAS;
+
+		/*
+		 * For PCI, Extended logical block will be generated by the
+		 * controller.
+		 */
+		if (ns->ctrl->ops->flags & NVME_F_METADATA_SUPPORTED) {
+			if (!(ns->features & NVME_NS_EXT_LBAS))
+				ns->features |= NVME_NS_DIX_SUPPORTED;
+		}
+	}
 
 	if (ns->noiob)
 		nvme_set_chunk_size(ns);
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 1024fec7914c..72473902f364 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -139,6 +139,7 @@ struct nvme_request {
 	u8			flags;
 	u16			status;
 	struct nvme_ctrl	*ctrl;
+	bool			has_pi;
 };
 
 /*
@@ -381,8 +382,11 @@ struct nvme_ns {
 	u16 ms;
 	u16 sgs;
 	u32 sws;
-	bool ext;
 	u8 pi_type;
+	unsigned long features;
+#define NVME_NS_EXT_LBAS	(1 << 0)
+#define NVME_NS_DIX_SUPPORTED	(1 << 1)
+#define NVME_NS_DIF_SUPPORTED	(1 << 2)
 	unsigned long flags;
 #define NVME_NS_REMOVING	0
 #define NVME_NS_DEAD     	1
-- 
2.16.3


_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

  parent reply index

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-02 14:47 [PATCH 00/16 V2] nvme-rdma/nvmet-rdma: Add metadata/T10-PI support Max Gurtovoy
2019-12-02 14:47 ` [PATCH] nvme-cli/fabrics: Add pi_enable param to connect cmd Max Gurtovoy
2019-12-02 14:47 ` Max Gurtovoy [this message]
2019-12-04  8:41   ` [PATCH 01/16] nvme: Introduce namespace features flag Christoph Hellwig
2019-12-02 14:47 ` [PATCH 02/16] nvme: Enforce extended LBA format for fabrics metadata Max Gurtovoy
2019-12-02 14:47 ` [PATCH 03/16] nvme: Introduce max_integrity_segments ctrl attribute Max Gurtovoy
2019-12-02 14:48 ` [PATCH 04/16] nvme-fabrics: Allow user enabling metadata/T10-PI support Max Gurtovoy
2019-12-02 14:48 ` [PATCH 05/16] nvme: Introduce NVME_INLINE_PROT_SG_CNT Max Gurtovoy
2019-12-02 14:48 ` [PATCH 06/16] nvme-rdma: Introduce nvme_rdma_sgl structure Max Gurtovoy
2019-12-02 14:48 ` [PATCH 07/16] nvme-rdma: Add metadata/T10-PI support Max Gurtovoy
2020-01-22 21:57   ` James Smart
2020-01-23  9:59     ` Max Gurtovoy
2020-01-23 15:34       ` James Smart
2020-01-23 18:52         ` James Smart
2019-12-02 14:48 ` [PATCH 08/16] block: Add a BIP_MAPPED_INTEGRITY check to complete_fn Max Gurtovoy
2019-12-02 14:48 ` [PATCH 09/16] nvmet: Prepare metadata request Max Gurtovoy
2019-12-02 14:48 ` [PATCH 10/16] nvmet: Add metadata characteristics for a namespace Max Gurtovoy
2019-12-02 14:48 ` [PATCH 11/16] nvmet: Rename nvmet_rw_len to nvmet_rw_data_len Max Gurtovoy
2019-12-02 14:48 ` [PATCH 12/16] nvmet: Rename nvmet_check_data_len to nvmet_check_transfer_len Max Gurtovoy
2019-12-02 14:48 ` [PATCH 13/16] nvme: Add Metadata Capabilities enumerations Max Gurtovoy
2019-12-02 14:48 ` [PATCH 14/16] nvmet: Add metadata/T10-PI support Max Gurtovoy
2019-12-02 14:48 ` [PATCH 15/16] nvmet: Add metadata support for block devices Max Gurtovoy
2019-12-02 14:48 ` [PATCH 16/16] nvmet-rdma: Add metadata/T10-PI support Max Gurtovoy

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191202144812.147686-3-maxg@mellanox.com \
    --to=maxg@mellanox.com \
    --cc=axboe@kernel.dk \
    --cc=hch@lst.de \
    --cc=idanb@mellanox.com \
    --cc=israelr@mellanox.com \
    --cc=kbusch@kernel.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=martin.petersen@oracle.com \
    --cc=oren@mellanox.com \
    --cc=sagi@grimberg.me \
    --cc=shlomin@mellanox.com \
    --cc=vladimirk@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-NVME Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-nvme/0 linux-nvme/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-nvme linux-nvme/ https://lore.kernel.org/linux-nvme \
		linux-nvme@lists.infradead.org
	public-inbox-index linux-nvme

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-nvme


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git