[PATCH 0/4] nvmet: misc model, ctrl-id and AEN fixes

[PATCH 0/4] nvmet: misc model, ctrl-id and AEN fixes

[Chaitanya Kulkarni]

Hi,

This is a small patch series that allows users to configure the model
and controller ID. Also, patch #3 has a fix for missing sscanf check
in the nvmet_subsys_attr_serial_store() where patch #4 provides a fix
to clear out the async event for which AEN is not generated.

The changelog is present in the respective patches.

Regards,
Chaitanya

Chaitanya Kulkarni (2):
  nvmet: make ctrl-id configurable
  nvmet: check sscanf value for subsys serial attr

Daniel Wagner (1):
  nvmet: update AEN list and array at one place

Mark Ruijter (1):
  nvmet: make ctrl model configurable

 drivers/nvme/target/admin-cmd.c |  17 +++-
 drivers/nvme/target/configfs.c  | 135 +++++++++++++++++++++++++++++++-
 drivers/nvme/target/core.c      |  72 ++++++++++-------
 drivers/nvme/target/nvmet.h     |  10 +++
 4 files changed, 201 insertions(+), 33 deletions(-)

-- 
2.22.1


_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

[PATCH V4 1/4] nvmet: make ctrl-id configurable

[Chaitanya Kulkarni]

This patch adds a new target subsys attribute which allows user to
optionally specify target controller IDs which then used in the
nvmet_execute_identify_ctrl() to fill up the nvme_id_ctrl structure.

For example, when using a cluster setup with two nodes, with a dual
ported NVMe drive and exporting the drive from both the nodes,
The connection to the host fails due to the same controller ID and
results in the following error message:-

"nvme nvmeX: Duplicate cntlid XXX with nvmeX, rejecting"

With this patch now user can partition the controller IDs for each
subsystem by setting up the cntlid_min and cntlid_max. These values
will be used at the time of the controller ID creation. By partitioning
the ctrl-ids for each subsystem results in the unique ctrl-id space
which avoids the collision.

When new attribute is not specified target will fall back to original
cntlid calculation method.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
---
Changes from V3:-

1. Remove error message in nvmet_subsys_attr_attr_cntlid_[min|max]().
2. Remove the return variable and simplify tail of the functions.

Changes from V2:-

1. Reduce the size of the lock for sscanf for cntlid_min and cntlid_max.
2. Remove the common show and store function for cntlid.
3. Move cntlid_min and cntlid_max check into the store function. 
4. Update the patch description.
5. Move check for valid cntlid_[min|max] parameter into configfs
   respective store function.

Changes from V1:-

1. Add cntlid max and min configfs attributes.
2. Use simple if .. else statements instead of ternary operators.
---
 drivers/nvme/target/configfs.c | 62 ++++++++++++++++++++++++++++++++++
 drivers/nvme/target/core.c     |  8 +++--
 drivers/nvme/target/nvmet.h    |  2 ++
 3 files changed, 70 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c
index 98613a45bd3b..c62f8b8b3d53 100644
--- a/drivers/nvme/target/configfs.c
+++ b/drivers/nvme/target/configfs.c
@@ -862,10 +862,72 @@ static ssize_t nvmet_subsys_attr_serial_store(struct config_item *item,
 }
 CONFIGFS_ATTR(nvmet_subsys_, attr_serial);
 
+static ssize_t nvmet_subsys_attr_cntlid_min_show(struct config_item *item,
+						 char *page)
+{
+	return snprintf(page, PAGE_SIZE, "%u\n", to_subsys(item)->cntlid_min);
+}
+
+static ssize_t nvmet_subsys_attr_cntlid_min_store(struct config_item *item,
+						  const char *page, size_t cnt)
+{
+	u16 cntlid_min;
+
+	if (sscanf(page, "%hu\n", &cntlid_min) != 1)
+		return -EINVAL;
+
+	if (cntlid_min == 0)
+		return -EINVAL;
+
+	down_write(&nvmet_config_sem);
+	if (cntlid_min >= to_subsys(item)->cntlid_max)
+		goto out_unlock;
+	to_subsys(item)->cntlid_min = cntlid_min;
+	up_write(&nvmet_config_sem);
+	return cnt;
+
+out_unlock:
+	up_write(&nvmet_config_sem);
+	return -EINVAL;
+}
+CONFIGFS_ATTR(nvmet_subsys_, attr_cntlid_min);
+
+static ssize_t nvmet_subsys_attr_cntlid_max_show(struct config_item *item,
+						 char *page)
+{
+	return snprintf(page, PAGE_SIZE, "%u\n", to_subsys(item)->cntlid_max);
+}
+
+static ssize_t nvmet_subsys_attr_cntlid_max_store(struct config_item *item,
+						  const char *page, size_t cnt)
+{
+	u16 cntlid_max;
+
+	if (sscanf(page, "%hu\n", &cntlid_max) != 1)
+		return -EINVAL;
+
+	if (cntlid_max == 0)
+		return -EINVAL;
+
+	down_write(&nvmet_config_sem);
+	if (cntlid_max <= to_subsys(item)->cntlid_min)
+		goto out_unlock;
+	to_subsys(item)->cntlid_max = cntlid_max;
+	up_write(&nvmet_config_sem);
+	return cnt;
+
+out_unlock:
+	up_write(&nvmet_config_sem);
+	return -EINVAL;
+}
+CONFIGFS_ATTR(nvmet_subsys_, attr_cntlid_max);
+
 static struct configfs_attribute *nvmet_subsys_attrs[] = {
 	&nvmet_subsys_attr_attr_allow_any_host,
 	&nvmet_subsys_attr_attr_version,
 	&nvmet_subsys_attr_attr_serial,
+	&nvmet_subsys_attr_attr_cntlid_min,
+	&nvmet_subsys_attr_attr_cntlid_max,
 	NULL,
 };
 
diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index 28438b833c1b..990ad4c7bdfd 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -1267,8 +1267,11 @@ u16 nvmet_alloc_ctrl(const char *subsysnqn, const char *hostnqn,
 	if (!ctrl->sqs)
 		goto out_free_cqs;
 
+	if (subsys->cntlid_min > subsys->cntlid_max)
+		goto out_free_cqs;
+
 	ret = ida_simple_get(&cntlid_ida,
-			     NVME_CNTLID_MIN, NVME_CNTLID_MAX,
+			     subsys->cntlid_min, subsys->cntlid_max,
 			     GFP_KERNEL);
 	if (ret < 0) {
 		status = NVME_SC_CONNECT_CTRL_BUSY | NVME_SC_DNR;
@@ -1416,7 +1419,8 @@ struct nvmet_subsys *nvmet_subsys_alloc(const char *subsysnqn,
 		kfree(subsys);
 		return ERR_PTR(-ENOMEM);
 	}
-
+	subsys->cntlid_min = NVME_CNTLID_MIN;
+	subsys->cntlid_max = NVME_CNTLID_MAX;
 	kref_init(&subsys->ref);
 
 	mutex_init(&subsys->lock);
diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h
index 46df45e837c9..6492d12e626a 100644
--- a/drivers/nvme/target/nvmet.h
+++ b/drivers/nvme/target/nvmet.h
@@ -211,6 +211,8 @@ struct nvmet_subsys {
 	struct list_head	namespaces;
 	unsigned int		nr_namespaces;
 	unsigned int		max_nsid;
+	u16			cntlid_min;
+	u16			cntlid_max;
 
 	struct list_head	ctrls;
 
-- 
2.22.1


_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

[PATCH V6 2/4] nvmet: make ctrl model configurable

[Chaitanya Kulkarni]

From: Mark Ruijter <MRuijter@onestopsystems.com>

This patch adds a new target subsys attribute which allows user to
optionally specify model name which then used in the
nvmet_execute_identify_ctrl() to fill up the nvme_id_ctrl structure.

The default value for the model is set to "Linux" for backward
compatibility.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Mark Ruijter <MRuijter@onestopsystems.com>
[chaitanya.kulkarni@wdc.com
 *Use macro for default model, coding style fixes.
 *Use RCU for accessing model in for configfs and in
  nvmet_execute_identify_ctrl().
]
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
---
Changes from V5 :-

1. Use correct mutex_is_locked().
2. Move kfree_rcu() out of the nvmet_config_sem.

Changes from V4:-

1. Use rcu_replace_pointer() and kfree_rcu() for subsys model add
   additional structure nvmet_subsys_model needed for rcu.
2. Remove nvmet_model_number() helper as we are using rcu based
   readers for reading model.
3. Add nvmet_id_set_model_number().

Changes from V3:-

1, Update commit description with additional changes on the top of
   original patch.
2. Reduce the size of the lock in nvmet_subsys_attr_model_store().
3. Don't initialize subsys->model = NULL nvmet_subsys_alloc().

Changes from V2:-

1. Use if else pattern than ternary operators.
2. Change the name nvmet_subsys_model() -> nvmet_model_number().
3. Introduce nvmet_is_ascii() to filter the model characters.
4. Change tmp -> tmp_model in nvmet_subsys_attr_model_store().

Changes from V1:-

1. Don't allocate memory for default subsys model,
2. Use helper to get the default model string from ctrl->subsys in the
   nvmet_execute_identify_ctrl() and nvmet_subsys_attr_model()_show.
   Later is needed so that nvmetcli can display default value Linux
   when the model is not set from the user.
3. Get rid of the extra variable c in the nvmet_subsys_attr_model_store()
   and replace for with while loop without loosing the code redability.
---
 drivers/nvme/target/admin-cmd.c | 17 ++++++++-
 drivers/nvme/target/configfs.c  | 66 +++++++++++++++++++++++++++++++++
 drivers/nvme/target/core.c      |  1 +
 drivers/nvme/target/nvmet.h     |  8 ++++
 4 files changed, 90 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c
index 56c21b501185..57c02e41c263 100644
--- a/drivers/nvme/target/admin-cmd.c
+++ b/drivers/nvme/target/admin-cmd.c
@@ -312,12 +312,25 @@ static void nvmet_execute_get_log_page(struct nvmet_req *req)
 	nvmet_req_complete(req, NVME_SC_INVALID_FIELD | NVME_SC_DNR);
 }
 
+static void nvmet_id_set_model_number(struct nvme_id_ctrl *id,
+				      struct nvmet_subsys *subsys)
+{
+	const char *model = NVMET_DEFAULT_CTRL_MODEL;
+	struct nvmet_subsys_model *subsys_model;
+
+	rcu_read_lock();
+	subsys_model = rcu_dereference(subsys->model);
+	if (subsys_model)
+		model = subsys_model->number;
+	memcpy_and_pad(id->mn, sizeof(id->mn), model, strlen(model), ' ');
+	rcu_read_unlock();
+}
+
 static void nvmet_execute_identify_ctrl(struct nvmet_req *req)
 {
 	struct nvmet_ctrl *ctrl = req->sq->ctrl;
 	struct nvme_id_ctrl *id;
 	u16 status = 0;
-	const char model[] = "Linux";
 
 	id = kzalloc(sizeof(*id), GFP_KERNEL);
 	if (!id) {
@@ -332,7 +345,7 @@ static void nvmet_execute_identify_ctrl(struct nvmet_req *req)
 	memset(id->sn, ' ', sizeof(id->sn));
 	bin2hex(id->sn, &ctrl->subsys->serial,
 		min(sizeof(ctrl->subsys->serial), sizeof(id->sn) / 2));
-	memcpy_and_pad(id->mn, sizeof(id->mn), model, sizeof(model) - 1, ' ');
+	nvmet_id_set_model_number(id, ctrl->subsys);
 	memcpy_and_pad(id->fr, sizeof(id->fr),
 		       UTS_RELEASE, strlen(UTS_RELEASE), ' ');
 
diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c
index c62f8b8b3d53..a03d79488943 100644
--- a/drivers/nvme/target/configfs.c
+++ b/drivers/nvme/target/configfs.c
@@ -922,12 +922,78 @@ static ssize_t nvmet_subsys_attr_cntlid_max_store(struct config_item *item,
 }
 CONFIGFS_ATTR(nvmet_subsys_, attr_cntlid_max);
 
+static ssize_t nvmet_subsys_attr_model_show(struct config_item *item,
+					    char *page)
+{
+	struct nvmet_subsys *subsys = to_subsys(item);
+	struct nvmet_subsys_model *subsys_model;
+	char *model = NVMET_DEFAULT_CTRL_MODEL;
+	int ret;
+
+	rcu_read_lock();
+	subsys_model = rcu_dereference(subsys->model);
+	if (subsys_model)
+		model = subsys_model->number;
+	ret = snprintf(page, PAGE_SIZE, "%s\n", model);
+	rcu_read_unlock();
+
+	return ret;
+}
+
+/* See Section 1.5 of NVMe 1.4 */
+static bool nvmet_is_ascii(const char c)
+{
+	return c >= 0x20 && c <= 0x7e;
+}
+
+static ssize_t nvmet_subsys_attr_model_store(struct config_item *item,
+					     const char *page, size_t count)
+{
+	struct nvmet_subsys *subsys = to_subsys(item);
+	struct nvmet_subsys_model *new_model;
+	char *new_model_number;
+	int pos = 0, len;
+
+	len = strcspn(page, "\n");
+	if (!len)
+		return -EINVAL;
+
+	for (pos = 0; pos < len; pos++) {
+		if (!nvmet_is_ascii(page[pos]))
+			return -EINVAL;
+	}
+
+	new_model_number = kstrndup(page, len, GFP_KERNEL);
+	if (!new_model_number)
+		return -ENOMEM;
+
+	new_model = kzalloc(sizeof(*new_model) + len + 1, GFP_KERNEL);
+	if (!new_model) {
+		kfree(new_model_number);
+		return -ENOMEM;
+	}
+	memcpy(new_model->number, new_model_number, len);
+
+	down_write(&nvmet_config_sem);
+	mutex_lock(&subsys->lock);
+	new_model = rcu_replace_pointer(subsys->model, new_model,
+					mutex_is_locked(&subsys->lock));
+	mutex_unlock(&subsys->lock);
+	up_write(&nvmet_config_sem);
+
+	kfree_rcu(new_model, rcuhead);
+
+	return count;
+}
+CONFIGFS_ATTR(nvmet_subsys_, attr_model);
+
 static struct configfs_attribute *nvmet_subsys_attrs[] = {
 	&nvmet_subsys_attr_attr_allow_any_host,
 	&nvmet_subsys_attr_attr_version,
 	&nvmet_subsys_attr_attr_serial,
 	&nvmet_subsys_attr_attr_cntlid_min,
 	&nvmet_subsys_attr_attr_cntlid_max,
+	&nvmet_subsys_attr_attr_model,
 	NULL,
 };
 
diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index 990ad4c7bdfd..72938c8e9fcb 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -1439,6 +1439,7 @@ static void nvmet_subsys_free(struct kref *ref)
 	WARN_ON_ONCE(!list_empty(&subsys->namespaces));
 
 	kfree(subsys->subsysnqn);
+	kfree_rcu(subsys->model, rcuhead);
 	kfree(subsys);
 }
 
diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h
index 6492d12e626a..7ad022f1f4ac 100644
--- a/drivers/nvme/target/nvmet.h
+++ b/drivers/nvme/target/nvmet.h
@@ -23,6 +23,7 @@
 #define NVMET_ASYNC_EVENTS		4
 #define NVMET_ERROR_LOG_SLOTS		128
 #define NVMET_NO_ERROR_LOC		((u16)-1)
+#define NVMET_DEFAULT_CTRL_MODEL	"Linux"
 
 /*
  * Supported optional AENs:
@@ -202,6 +203,11 @@ struct nvmet_ctrl {
 	struct nvme_error_slot	slots[NVMET_ERROR_LOG_SLOTS];
 };
 
+struct nvmet_subsys_model {
+	struct rcu_head		rcuhead;
+	char			number[];
+};
+
 struct nvmet_subsys {
 	enum nvme_subsys_type	type;
 
@@ -229,6 +235,8 @@ struct nvmet_subsys {
 
 	struct config_group	namespaces_group;
 	struct config_group	allowed_hosts_group;
+
+	struct nvmet_subsys_model	__rcu *model;
 };
 
 static inline struct nvmet_subsys *to_subsys(struct config_item *item)
-- 
2.22.1


_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

[PATCH V2 3/4] nvmet: check sscanf value for subsys serial attr

[Chaitanya Kulkarni]

For nvmet in configfs.c we check return values for all the sscanf()
calls. Add similar check into the nvmet_subsys_attr_serial_store().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
---
Changes from V1:-

1. Use temp variable to scan the new serial value and retain original
   value if sscanf() fails.
---
 drivers/nvme/target/configfs.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c
index a03d79488943..3e9acc5faeb9 100644
--- a/drivers/nvme/target/configfs.c
+++ b/drivers/nvme/target/configfs.c
@@ -852,10 +852,13 @@ static ssize_t nvmet_subsys_attr_serial_show(struct config_item *item,
 static ssize_t nvmet_subsys_attr_serial_store(struct config_item *item,
 					      const char *page, size_t count)
 {
-	struct nvmet_subsys *subsys = to_subsys(item);
+	u64 serial;
+
+	if (sscanf(page, "%llx\n", &serial) != 1)
+		return -EINVAL;
 
 	down_write(&nvmet_config_sem);
-	sscanf(page, "%llx\n", &subsys->serial);
+	to_subsys(item)->serial = serial;
 	up_write(&nvmet_config_sem);
 
 	return count;
-- 
2.22.1


_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

[PATCH V4 4/4] nvmet: update AEN list and array at one place

[Chaitanya Kulkarni]

From: Daniel Wagner <dwagner@suse.de>

All async events are enqueued via nvmet_add_async_event() which
updates the ctrl->async_event_cmds[] array and additionally an struct
nvmet_async_event is added to the ctrl->async_events list.

Under normal operations the nvmet_async_event_work() updates again the
ctrl->async_event_cmds and removes the corresponding struct
nvmet_async_event from the list again. Though nvmet_sq_destroy() could
be called which calls nvmet_async_events_free() which only updates
the ctrl->async_event_cmds[] array.

Add new functions nvmet_async_events_process() and
nvmet_async_events_free() to process async events, update an
array and the list.

When we destroy submission queue after clearing the aen present on the
ctrl->async list we also loop over ctrl->async_event_cmds[] for any
requests posted by the host for which we don't have the AEN in the
ctrl->async_events list by calling nvmet_async_event_process() and
nvmet_async_events_free().

Signed-off-by: Daniel Wagner <dwagner@suse.de>
[chaitanya.kulkarni@wdc.com
 * Added the code to loop over and clear out outstanding requests
   present in the ctrl->async_event_cmds[] for which aen is not
   generated.
 * Update patch description and title to fit kernel log style.
]
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
---
Changes from V3:-

1. Remove the sq->ctrl in the nvmet_sq_destroy() and use local ctrl
   variable.
2. Initialize sq->ctrl == NULL instead of local variable.

Changes from V2:-

1. Add helper to clean up the array ctrl->nr_async_event_cmds[]
   nvmet_async_events_free().
2. Use local variable into nvmet_sq_destroy().
3. Call newly added helper nvmet_async_events_free() from
   nvmet_sq_destroy().
4. Update commit log.

Changes from V1:-

1. Generate patch on nvme-5.6 branch.
---
 drivers/nvme/target/core.c | 63 ++++++++++++++++++++++----------------
 1 file changed, 36 insertions(+), 27 deletions(-)

diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index 72938c8e9fcb..002658850aa5 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -129,27 +129,8 @@ static u32 nvmet_async_event_result(struct nvmet_async_event *aen)
 	return aen->event_type | (aen->event_info << 8) | (aen->log_page << 16);
 }
 
-static void nvmet_async_events_free(struct nvmet_ctrl *ctrl)
-{
-	struct nvmet_req *req;
-
-	while (1) {
-		mutex_lock(&ctrl->lock);
-		if (!ctrl->nr_async_event_cmds) {
-			mutex_unlock(&ctrl->lock);
-			return;
-		}
-
-		req = ctrl->async_event_cmds[--ctrl->nr_async_event_cmds];
-		mutex_unlock(&ctrl->lock);
-		nvmet_req_complete(req, NVME_SC_INTERNAL | NVME_SC_DNR);
-	}
-}
-
-static void nvmet_async_event_work(struct work_struct *work)
+static void nvmet_async_events_process(struct nvmet_ctrl *ctrl, u16 status)
 {
-	struct nvmet_ctrl *ctrl =
-		container_of(work, struct nvmet_ctrl, async_event_work);
 	struct nvmet_async_event *aen;
 	struct nvmet_req *req;
 
@@ -159,20 +140,43 @@ static void nvmet_async_event_work(struct work_struct *work)
 				struct nvmet_async_event, entry);
 		if (!aen || !ctrl->nr_async_event_cmds) {
 			mutex_unlock(&ctrl->lock);
-			return;
+			break;
 		}
 
 		req = ctrl->async_event_cmds[--ctrl->nr_async_event_cmds];
-		nvmet_set_result(req, nvmet_async_event_result(aen));
+		if (status == 0)
+			nvmet_set_result(req, nvmet_async_event_result(aen));
 
 		list_del(&aen->entry);
 		kfree(aen);
 
 		mutex_unlock(&ctrl->lock);
-		nvmet_req_complete(req, 0);
+		nvmet_req_complete(req, status);
 	}
 }
 
+static void nvmet_async_events_free(struct nvmet_ctrl *ctrl)
+{
+	struct nvmet_req *req;
+
+	mutex_lock(&ctrl->lock);
+	while (ctrl->nr_async_event_cmds) {
+		req = ctrl->async_event_cmds[--ctrl->nr_async_event_cmds];
+		mutex_unlock(&ctrl->lock);
+		nvmet_req_complete(req, NVME_SC_INTERNAL | NVME_SC_DNR);
+		mutex_lock(&ctrl->lock);
+	}
+	mutex_unlock(&ctrl->lock);
+}
+
+static void nvmet_async_event_work(struct work_struct *work)
+{
+	struct nvmet_ctrl *ctrl =
+		container_of(work, struct nvmet_ctrl, async_event_work);
+
+	nvmet_async_events_process(ctrl, 0);
+}
+
 void nvmet_add_async_event(struct nvmet_ctrl *ctrl, u8 event_type,
 		u8 event_info, u8 log_page)
 {
@@ -752,19 +756,24 @@ static void nvmet_confirm_sq(struct percpu_ref *ref)
 
 void nvmet_sq_destroy(struct nvmet_sq *sq)
 {
+	u16 status = NVME_SC_INTERNAL | NVME_SC_DNR;
+	struct nvmet_ctrl *ctrl = sq->ctrl;
+
 	/*
 	 * If this is the admin queue, complete all AERs so that our
 	 * queue doesn't have outstanding requests on it.
 	 */
-	if (sq->ctrl && sq->ctrl->sqs && sq->ctrl->sqs[0] == sq)
-		nvmet_async_events_free(sq->ctrl);
+	if (ctrl && ctrl->sqs && ctrl->sqs[0] == sq) {
+		nvmet_async_events_process(ctrl, status);
+		nvmet_async_events_free(ctrl);
+	}
 	percpu_ref_kill_and_confirm(&sq->ref, nvmet_confirm_sq);
 	wait_for_completion(&sq->confirm_done);
 	wait_for_completion(&sq->free_done);
 	percpu_ref_exit(&sq->ref);
 
-	if (sq->ctrl) {
-		nvmet_ctrl_put(sq->ctrl);
+	if (ctrl) {
+		nvmet_ctrl_put(ctrl);
 		sq->ctrl = NULL; /* allows reusing the queue later */
 	}
 }
-- 
2.22.1


_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH V4 4/4] nvmet: update AEN list and array at one place

[Christoph Hellwig]

Looks good,

Reviewed-by: Christoph Hellwig <hch@lst.de>

_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH 0/4] nvmet: misc model, ctrl-id and AEN fixes

[Keith Busch]

On Thu, Jan 30, 2020 at 10:29:30AM -0800, Chaitanya Kulkarni wrote:
> Hi,
> 
> This is a small patch series that allows users to configure the model
> and controller ID. Also, patch #3 has a fix for missing sscanf check
> in the nvmet_subsys_attr_serial_store() where patch #4 provides a fix
> to clear out the async event for which AEN is not generated.

Thanks, applied for-5.6

_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme