[PATCH] nvme-fcloop: add sysfs attribute to inject command drop

[PATCH] nvme-fcloop: add sysfs attribute to inject command drop

[James Smart]

[-- Attachment #1.1: Type: text/plain, Size: 4594 bytes --]

Add sysfs attribute to specify parameters for dropping a command.
The attribute takes a string of
  <opcode>:<starting a what instance>:<number of times>
Opcode is formatted as lower 8 bits are opcode. If a fabrics opcode,
a bit above bits 7:0 will be set.

Once set, each sqe is looked at. If the opcode matches the running
instance count is updated. If the instance count is in the range of
where to drop (based on starting and # of times), then drop the
command by not passing it to the target layer.

Signed-off-by: James Smart <james.smart@broadcom.com>
---
 drivers/nvme/target/fcloop.c | 81 +++++++++++++++++++++++++++++++++++-
 1 file changed, 79 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/target/fcloop.c b/drivers/nvme/target/fcloop.c
index 3da067a8311e..ae46c8402f67 100644
--- a/drivers/nvme/target/fcloop.c
+++ b/drivers/nvme/target/fcloop.c
@@ -564,6 +564,50 @@ fcloop_call_host_done(struct nvmefc_fcp_req *fcpreq,
 	fcloop_tfcp_req_put(tfcp_req);
 }
 
+static bool drop_fabric_opcode;
+#define DROP_OPCODE_MASK	0x00FF
+/* fabrics opcode will have a bit set above 1st byte */
+static int drop_opcode = -1;
+static int drop_instance;
+static int drop_amount;
+static int drop_current_cnt;
+
+/*
+ * Routine to parse io and determine if the io is to be dropped.
+ * Returns:
+ *  0 if io is not obstructed
+ *  1 if io was dropped
+ */
+int check_for_drop(struct fcloop_fcpreq *tfcp_req)
+{
+	struct nvmefc_fcp_req *fcpreq = tfcp_req->fcpreq;
+	struct nvme_fc_cmd_iu *cmdiu = fcpreq->cmdaddr;
+	struct nvme_command *sqe = &cmdiu->sqe;
+
+	if (drop_opcode == -1)
+		return 0;
+
+	pr_info("%s: seq opcd x%02x fctype x%02x: drop F %s op x%02x "
+		"inst %d start %d amt %d\n",
+		__func__, sqe->common.opcode, sqe->fabrics.fctype,
+		drop_fabric_opcode ? "y" : "n",
+		drop_opcode, drop_current_cnt, drop_instance, drop_amount);
+
+	if ((drop_fabric_opcode &&
+	     (sqe->common.opcode != nvme_fabrics_command ||
+	      sqe->fabrics.fctype != drop_opcode)) ||
+	    (!drop_fabric_opcode && sqe->common.opcode != drop_opcode))
+		return 0;
+
+	if (++drop_current_cnt >= drop_instance) {
+		if (drop_current_cnt >= drop_instance + drop_amount)
+			drop_opcode = -1;
+		return 1;
+	}
+
+	return 0;
+}
+
 static void
 fcloop_fcp_recv_work(struct work_struct *work)
 {
@@ -590,10 +634,14 @@ fcloop_fcp_recv_work(struct work_struct *work)
 
 	if (unlikely(aborted))
 		ret = -ECANCELED;
-	else
-		ret = nvmet_fc_rcv_fcp_req(tfcp_req->tport->targetport,
+	else {
+		if (likely(!check_for_drop(tfcp_req)))
+			ret = nvmet_fc_rcv_fcp_req(tfcp_req->tport->targetport,
 				&tfcp_req->tgt_fcp_req,
 				fcpreq->cmdaddr, fcpreq->cmdlen);
+		else
+			pr_info("%s: dropped command ********\n", __func__);
+	}
 	if (ret)
 		fcloop_call_host_done(fcpreq, tfcp_req, ret);
 
@@ -1449,6 +1497,33 @@ fcloop_delete_target_port(struct device *dev, struct device_attribute *attr,
 	return ret ? ret : count;
 }
 
+static ssize_t
+fcloop_set_cmd_drop(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	int opcode, starting, amount;
+
+	if (sscanf(buf, "%x:%d:%d", &opcode, &starting, &amount) != 3)
+		return -EBADRQC;
+
+	drop_current_cnt = 0;
+	drop_fabric_opcode = (opcode & ~DROP_OPCODE_MASK) ? true : false;
+	drop_opcode = (opcode & DROP_OPCODE_MASK);
+	drop_instance = starting;
+	/* the check to drop routine uses instance + count to know when
+	 * to end. Thus, if dropping 1 instance, count should be 0.
+	 * so subtract 1 from the count.
+	 */
+	drop_amount = amount - 1;
+
+	pr_info("%s: DROP: Starting at instance %d of%s opcode x%x drop +%d "
+		"instances\n",
+		__func__, drop_instance, drop_fabric_opcode ? " fabric" : "",
+		drop_opcode, drop_amount);
+
+	return count;
+}
+
 
 static DEVICE_ATTR(add_local_port, 0200, NULL, fcloop_create_local_port);
 static DEVICE_ATTR(del_local_port, 0200, NULL, fcloop_delete_local_port);
@@ -1456,6 +1531,7 @@ static DEVICE_ATTR(add_remote_port, 0200, NULL, fcloop_create_remote_port);
 static DEVICE_ATTR(del_remote_port, 0200, NULL, fcloop_delete_remote_port);
 static DEVICE_ATTR(add_target_port, 0200, NULL, fcloop_create_target_port);
 static DEVICE_ATTR(del_target_port, 0200, NULL, fcloop_delete_target_port);
+static DEVICE_ATTR(set_cmd_drop, 0200, NULL, fcloop_set_cmd_drop);
 
 static struct attribute *fcloop_dev_attrs[] = {
 	&dev_attr_add_local_port.attr,
@@ -1464,6 +1540,7 @@ static struct attribute *fcloop_dev_attrs[] = {
 	&dev_attr_del_remote_port.attr,
 	&dev_attr_add_target_port.attr,
 	&dev_attr_del_target_port.attr,
+	&dev_attr_set_cmd_drop.attr,
 	NULL
 };
 
-- 
2.26.2


[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4163 bytes --]

[-- Attachment #2: Type: text/plain, Size: 158 bytes --]

_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH] nvme-fcloop: add sysfs attribute to inject command drop

[Christoph Hellwig]

Thanks,

applied to nvme-5.11.

_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme