linux-nvme.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Logan Gunthorpe <logang@deltatee.com>
To: linux-kernel@vger.kernel.org, linux-nvme@lists.infradead.org,
	linux-block@vger.kernel.org, linux-pci@vger.kernel.org,
	linux-mm@kvack.org, iommu@lists.linux-foundation.org
Cc: "Stephen Bates" <sbates@raithlin.com>,
	"Christoph Hellwig" <hch@lst.de>,
	"Dan Williams" <dan.j.williams@intel.com>,
	"Jason Gunthorpe" <jgg@ziepe.ca>,
	"Christian König" <christian.koenig@amd.com>,
	"Ira Weiny" <iweiny@intel.com>,
	"John Hubbard" <jhubbard@nvidia.com>,
	"Don Dutile" <ddutile@redhat.com>,
	"Matthew Wilcox" <willy@infradead.org>,
	"Daniel Vetter" <daniel.vetter@ffwll.ch>,
	"Jakowski Andrzej" <andrzej.jakowski@intel.com>,
	"Minturn Dave B" <dave.b.minturn@intel.com>,
	"Jason Ekstrand" <jason@jlekstrand.net>,
	"Dave Hansen" <dave.hansen@linux.intel.com>,
	"Xiong Jianxin" <jianxin.xiong@intel.com>,
	"Logan Gunthorpe" <logang@deltatee.com>
Subject: [RFC PATCH v2 08/11] iommu/dma: Support PCI P2PDMA pages in dma-iommu map_sg
Date: Thu, 11 Mar 2021 16:31:38 -0700	[thread overview]
Message-ID: <20210311233142.7900-9-logang@deltatee.com> (raw)
In-Reply-To: <20210311233142.7900-1-logang@deltatee.com>

When a PCI P2PDMA page is seen, set the IOVA length of the segment
to zero so that it is not mapped into the IOVA. Then, in finalise_sg(),
apply the appropriate bus address to the segment. The IOVA is not
created if the scatterlist only consists of P2PDMA pages.

Similar to dma-direct, the sg_mark_pci_p2pdma() flag is used to
indicate bus address segments. On unmap, P2PDMA segments are skipped
over when determining the start and end IOVA addresses.

With this change, the flags variable in the dma_map_ops is
set to DMA_F_PCI_P2PDMA_SUPPORTED to indicate support for
P2PDMA pages.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
---
 drivers/iommu/dma-iommu.c | 63 ++++++++++++++++++++++++++++++++-------
 1 file changed, 53 insertions(+), 10 deletions(-)

diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
index af765c813cc8..c0821e9051a9 100644
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -20,6 +20,7 @@
 #include <linux/mm.h>
 #include <linux/mutex.h>
 #include <linux/pci.h>
+#include <linux/pci-p2pdma.h>
 #include <linux/swiotlb.h>
 #include <linux/scatterlist.h>
 #include <linux/vmalloc.h>
@@ -846,7 +847,7 @@ static void iommu_dma_unmap_page(struct device *dev, dma_addr_t dma_handle,
  * segment's start address to avoid concatenating across one.
  */
 static int __finalise_sg(struct device *dev, struct scatterlist *sg, int nents,
-		dma_addr_t dma_addr)
+		dma_addr_t dma_addr, unsigned long attrs)
 {
 	struct scatterlist *s, *cur = sg;
 	unsigned long seg_mask = dma_get_seg_boundary(dev);
@@ -864,6 +865,20 @@ static int __finalise_sg(struct device *dev, struct scatterlist *sg, int nents,
 		sg_dma_address(s) = DMA_MAPPING_ERROR;
 		sg_dma_len(s) = 0;
 
+		if (is_pci_p2pdma_page(sg_page(s)) && !s_iova_len) {
+			if (i > 0)
+				cur = sg_next(cur);
+
+			sg_dma_address(cur) = sg_phys(s) + s->offset -
+				pci_p2pdma_bus_offset(sg_page(s));
+			sg_dma_len(cur) = s->length;
+			sg_mark_pci_p2pdma(cur);
+
+			count++;
+			cur_len = 0;
+			continue;
+		}
+
 		/*
 		 * Now fill in the real DMA data. If...
 		 * - there is a valid output segment to append to
@@ -960,11 +975,12 @@ static int iommu_dma_map_sg(struct device *dev, struct scatterlist *sg,
 	struct iommu_dma_cookie *cookie = domain->iova_cookie;
 	struct iova_domain *iovad = &cookie->iovad;
 	struct scatterlist *s, *prev = NULL;
+	struct dev_pagemap *pgmap = NULL;
 	int prot = dma_info_to_prot(dir, dev_is_dma_coherent(dev), attrs);
 	dma_addr_t iova;
 	size_t iova_len = 0;
 	unsigned long mask = dma_get_seg_boundary(dev);
-	int i;
+	int i, map = -1, ret = 0;
 
 	if (static_branch_unlikely(&iommu_deferred_attach_enabled) &&
 	    iommu_deferred_attach(dev, domain))
@@ -993,6 +1009,23 @@ static int iommu_dma_map_sg(struct device *dev, struct scatterlist *sg,
 		s_length = iova_align(iovad, s_length + s_iova_off);
 		s->length = s_length;
 
+		if (is_pci_p2pdma_page(sg_page(s))) {
+			if (sg_page(s)->pgmap != pgmap) {
+				pgmap = sg_page(s)->pgmap;
+				map = pci_p2pdma_dma_map_type(dev, pgmap);
+			}
+
+			if (map < 0) {
+				ret = -EREMOTEIO;
+				goto out_restore_sg;
+			}
+
+			if (map) {
+				s->length = 0;
+				continue;
+			}
+		}
+
 		/*
 		 * Due to the alignment of our single IOVA allocation, we can
 		 * depend on these assumptions about the segment boundary mask:
@@ -1015,6 +1048,9 @@ static int iommu_dma_map_sg(struct device *dev, struct scatterlist *sg,
 		prev = s;
 	}
 
+	if (!iova_len)
+		return __finalise_sg(dev, sg, nents, 0, attrs);
+
 	iova = iommu_dma_alloc_iova(domain, iova_len, dma_get_mask(dev), dev);
 	if (!iova)
 		goto out_restore_sg;
@@ -1026,19 +1062,19 @@ static int iommu_dma_map_sg(struct device *dev, struct scatterlist *sg,
 	if (iommu_map_sg_atomic(domain, iova, sg, nents, prot) < iova_len)
 		goto out_free_iova;
 
-	return __finalise_sg(dev, sg, nents, iova);
+	return __finalise_sg(dev, sg, nents, iova, attrs);
 
 out_free_iova:
 	iommu_dma_free_iova(cookie, iova, iova_len, NULL);
 out_restore_sg:
 	__invalidate_sg(sg, nents);
-	return 0;
+	return ret;
 }
 
 static void iommu_dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 		int nents, enum dma_data_direction dir, unsigned long attrs)
 {
-	dma_addr_t start, end;
+	dma_addr_t end, start = DMA_MAPPING_ERROR;
 	struct scatterlist *tmp;
 	int i;
 
@@ -1054,14 +1090,20 @@ static void iommu_dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 	 * The scatterlist segments are mapped into a single
 	 * contiguous IOVA allocation, so this is incredibly easy.
 	 */
-	start = sg_dma_address(sg);
-	for_each_sg(sg_next(sg), tmp, nents - 1, i) {
+	for_each_sg(sg, tmp, nents, i) {
+		if (sg_is_pci_p2pdma(tmp))
+			continue;
 		if (sg_dma_len(tmp) == 0)
 			break;
-		sg = tmp;
+
+		if (start == DMA_MAPPING_ERROR)
+			start = sg_dma_address(tmp);
+
+		end = sg_dma_address(tmp) + sg_dma_len(tmp);
 	}
-	end = sg_dma_address(sg) + sg_dma_len(sg);
-	__iommu_dma_unmap(dev, start, end - start);
+
+	if (start != DMA_MAPPING_ERROR)
+		__iommu_dma_unmap(dev, start, end - start);
 }
 
 static dma_addr_t iommu_dma_map_resource(struct device *dev, phys_addr_t phys,
@@ -1254,6 +1296,7 @@ static unsigned long iommu_dma_get_merge_boundary(struct device *dev)
 }
 
 static const struct dma_map_ops iommu_dma_ops = {
+	.flags			= DMA_F_PCI_P2PDMA_SUPPORTED,
 	.alloc			= iommu_dma_alloc,
 	.free			= iommu_dma_free,
 	.alloc_pages		= dma_common_alloc_pages,
-- 
2.20.1


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

  parent reply	other threads:[~2021-03-11 23:33 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-11 23:31 [RFC PATCH v2 00/11] Add support to dma_map_sg for P2PDMA Logan Gunthorpe
2021-03-11 23:31 ` [RFC PATCH v2 01/11] PCI/P2PDMA: Pass gfp_mask flags to upstream_bridge_distance_warn() Logan Gunthorpe
2021-03-12 20:39   ` Bjorn Helgaas
2021-03-12 20:53     ` Logan Gunthorpe
2021-03-11 23:31 ` [RFC PATCH v2 02/11] PCI/P2PDMA: Avoid pci_get_slot() which sleeps Logan Gunthorpe
2021-03-12 20:57   ` Bjorn Helgaas
2021-03-12 21:37     ` Logan Gunthorpe
2021-03-11 23:31 ` [RFC PATCH v2 03/11] PCI/P2PDMA: Attempt to set map_type if it has not been set Logan Gunthorpe
2021-03-11 23:31 ` [RFC PATCH v2 04/11] PCI/P2PDMA: Introduce pci_p2pdma_should_map_bus() and pci_p2pdma_bus_offset() Logan Gunthorpe
2021-03-13  1:38   ` Ira Weiny
2021-03-15 16:27     ` Logan Gunthorpe
2021-03-24 17:21       ` Jason Gunthorpe
2021-03-24 18:34         ` Christian König
2021-03-13  2:32   ` Ira Weiny
2021-03-15 16:30     ` Logan Gunthorpe
2021-03-16  8:14   ` Christoph Hellwig
2021-03-11 23:31 ` [RFC PATCH v2 05/11] lib/scatterlist: Add flag for indicating P2PDMA segments in an SGL Logan Gunthorpe
2021-03-11 23:31 ` [RFC PATCH v2 06/11] dma-direct: Support PCI P2PDMA pages in dma-direct map_sg Logan Gunthorpe
2021-03-12 15:52   ` Robin Murphy
2021-03-12 16:24     ` Logan Gunthorpe
2021-03-12 18:11       ` Robin Murphy
2021-03-12 18:27         ` Logan Gunthorpe
2021-03-16  7:58           ` Christoph Hellwig
2021-03-16 15:54             ` Logan Gunthorpe
2021-03-16  7:56         ` Christoph Hellwig
2021-03-16  8:11   ` Christoph Hellwig
2021-03-11 23:31 ` [RFC PATCH v2 07/11] dma-mapping: Add flags to dma_map_ops to indicate PCI P2PDMA support Logan Gunthorpe
2021-03-13  2:36   ` Ira Weiny
2021-03-15 16:33     ` Logan Gunthorpe
2021-03-16  8:00       ` Christoph Hellwig
2021-03-16  8:15   ` Christoph Hellwig
2021-03-11 23:31 ` Logan Gunthorpe [this message]
2021-03-12 15:52   ` [RFC PATCH v2 08/11] iommu/dma: Support PCI P2PDMA pages in dma-iommu map_sg Robin Murphy
2021-03-12 17:03     ` Logan Gunthorpe
2021-03-12 19:47       ` Robin Murphy
2021-03-12 20:06         ` Logan Gunthorpe
2021-03-11 23:31 ` [RFC PATCH v2 09/11] block: Add BLK_STS_P2PDMA Logan Gunthorpe
2021-03-16  8:00   ` Christoph Hellwig
2021-03-16 16:02     ` Logan Gunthorpe
2021-03-11 23:31 ` [RFC PATCH v2 10/11] nvme-pci: Check DMA ops when indicating support for PCI P2PDMA Logan Gunthorpe
2021-03-11 23:31 ` [RFC PATCH v2 11/11] nvme-pci: Convert to using dma_map_sg for p2pdma pages Logan Gunthorpe
2021-03-11 23:59   ` Jason Gunthorpe
2021-03-12  1:37     ` Logan Gunthorpe
2021-03-12 15:51 ` [RFC PATCH v2 00/11] Add support to dma_map_sg for P2PDMA Robin Murphy
2021-03-12 16:18   ` Logan Gunthorpe
2021-03-12 17:46     ` Robin Murphy
2021-03-12 18:24       ` Logan Gunthorpe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210311233142.7900-9-logang@deltatee.com \
    --to=logang@deltatee.com \
    --cc=andrzej.jakowski@intel.com \
    --cc=christian.koenig@amd.com \
    --cc=dan.j.williams@intel.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=dave.b.minturn@intel.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=ddutile@redhat.com \
    --cc=hch@lst.de \
    --cc=iommu@lists.linux-foundation.org \
    --cc=iweiny@intel.com \
    --cc=jason@jlekstrand.net \
    --cc=jgg@ziepe.ca \
    --cc=jhubbard@nvidia.com \
    --cc=jianxin.xiong@intel.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=sbates@raithlin.com \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).