Linux-NVME Archive on lore.kernel.org
 help / color / Atom feed
From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: Akinobu Mita <akinobu.mita@gmail.com>,
	linux-nvme@lists.infradead.org, linux-hwmon@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Amit Kucheria <amit.kucheria@verdurent.com>,
	Jean Delvare <jdelvare@suse.com>,
	Sagi Grimberg <sagi@grimberg.me>,
	Sujith Thomas <sujith.thomas@intel.com>,
	Jens Axboe <axboe@fb.com>, Guenter Roeck <linux@roeck-us.net>,
	Keith Busch <kbusch@kernel.org>,
	Darren Hart <dvhart@infradead.org>,
	Zhang Rui <rui.zhang@intel.com>, Christoph Hellwig <hch@lst.de>,
	Andy Shevchenko <andy@infradead.org>
Subject: Re: [PATCH v2 1/8] add header file for kelvin to/from Celsius conversion helpers
Date: Fri, 6 Dec 2019 17:49:18 +0100
Message-ID: <5f85f65c-78b6-0b63-f975-a216f9823985@linaro.org> (raw)
In-Reply-To: <1574952879-7200-2-git-send-email-akinobu.mita@gmail.com>

On 28/11/2019 15:54, Akinobu Mita wrote:
> There are several helper macros to convert kelvin to/from Celsius in
> <linux/thermal.h> for thermal drivers.  These are useful for any other
> drivers or subsystems, but it's odd to include <linux/thermal.h> just for
> the helpers.
> 
> This adds a new <linux/temperature.h> that provides the equivalent inline
> functions for any drivers or subsystems.  It is intended to replace the
> helpers in <linux/thermal.h>.
> 
> Cc: Sujith Thomas <sujith.thomas@intel.com>
> Cc: Darren Hart <dvhart@infradead.org>
> Cc: Andy Shevchenko <andy@infradead.org>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Amit Kucheria <amit.kucheria@verdurent.com>
> Cc: Jean Delvare <jdelvare@suse.com>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Keith Busch <kbusch@kernel.org>
> Cc: Jens Axboe <axboe@fb.com>
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Sagi Grimberg <sagi@grimberg.me>
> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
> ---
> * v2
> - add deci_kelvin_to_millicelsius_with_offset() in linux/temperature.h
> - stop including linux/temperature.h from linux/thermal.h
> 
>  include/linux/temperature.h | 51 +++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 include/linux/temperature.h
> 
> diff --git a/include/linux/temperature.h b/include/linux/temperature.h
> new file mode 100644
> index 0000000..679e70a
> --- /dev/null
> +++ b/include/linux/temperature.h
> @@ -0,0 +1,51 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _LINUX_TEMPERATURE_H
> +#define _LINUX_TEMPERATURE_H

It sounds strange to create a temperature file just for a few conversion
functions. Why not create an units.h file, so some more conversions
could be added later (not necessarily related to temperature) ?

> +#include <linux/kernel.h>
> +
> +#define ABSOLUTE_ZERO_MILLICELSIUS -273150
> +
> +static inline long kelvin_to_millicelsius(long t)

Why 'long' ?

> +{
> +	return t * 1000 + ABSOLUTE_ZERO_MILLICELSIUS;
> +}
> +
> +static inline long millicelsius_to_kelvin(long t)
> +{
> +	return DIV_ROUND_CLOSEST(t - ABSOLUTE_ZERO_MILLICELSIUS, 1000);

Please don't duplicate these operations, just do the conversion to the
right unit and then call a single function.

Replace the constant by macros like what we find in time64.h.

eg.
#define MILLICELSIUS_PER_CELCIUS 1000

So you can really do the cleanup in all the drivers, like removing:

drivers/iio/adc/qcom-vadc-common.h:#define KELVINMIL_CELSIUSMIL
        273150
drivers/iio/pressure/st_pressure_core.c:#define MCELSIUS_PER_CELSIUS
                1000
drivers/hwmon/xgene-hwmon.c:#define CELSIUS_TO_mCELSIUS(x)
((x) * 1000)
drivers/net/wireless/intel/iwlegacy/common.h:#define
KELVIN_TO_CELSIUS(x) ((x)-273)
drivers/net/wireless/intel/iwlegacy/common.h:#define
CELSIUS_TO_KELVIN(x) ((x)+273)
drivers/net/wireless/intel/iwlwifi/dvm/dev.h:#define
KELVIN_TO_CELSIUS(x) ((x)-273)
drivers/net/wireless/intel/iwlwifi/dvm/dev.h:#define
CELSIUS_TO_KELVIN(x) ((x)+273)
drivers/power/supply/sbs-battery.c:#define TEMP_KELVIN_TO_CELSIUS
        2731
drivers/thermal/armada_thermal.c:#define TO_MCELSIUS(c)
((c) * 1000)
drivers/thermal/rcar_gen3_thermal.c:#define MCELSIUS(temp)      ((temp)
* 1000)
drivers/thermal/rcar_thermal.c:#define MCELSIUS(temp)
((temp) * 1000)
drivers/thermal/samsung/exynos_tmu.c:#define MCELSIUS   1000
drivers/thermal/samsung/exynos_tmu.c:                   temp /= MCELSIUS;
drivers/thermal/samsung/exynos_tmu.c:                   hyst /= MCELSIUS;
drivers/thermal/samsung/exynos_tmu.c:   ref = trips[0].temperature /
MCELSIUS;
drivers/thermal/samsung/exynos_tmu.c:           *temp =
code_to_temp(data, value) * MCELSIUS;
drivers/thermal/samsung/exynos_tmu.c:           temp /= MCELSIUS;


> +}
> +
> +static inline long deci_kelvin_to_celsius(long t)
> +{
> +	return DIV_ROUND_CLOSEST(t * 100 + ABSOLUTE_ZERO_MILLICELSIUS, 1000);
> +}
> +
> +static inline long celsius_to_deci_kelvin(long t)
> +{
> +	return t * 10 - DIV_ROUND_CLOSEST(ABSOLUTE_ZERO_MILLICELSIUS, 100);
> +}
> +
> +/**
> + * deci_kelvin_to_millicelsius_with_offset - convert Kelvin to Celsius
> + * @t: temperature value in decidegrees Kelvin
> + * @offset: difference between Kelvin and Celsius in millidegrees
> + *
> + * Return: temperature value in millidegrees Celsius
> + */
> +static inline long deci_kelvin_to_millicelsius_with_offset(long t, long offset)
> +{
> +	return t * 100 - offset;
> +}
> +
> +static inline long deci_kelvin_to_millicelsius(long t)
> +{
> +	return t * 100 + ABSOLUTE_ZERO_MILLICELSIUS;
> +}
> +
> +static inline long millicelsius_to_deci_kelvin(long t)
> +{
> +	return DIV_ROUND_CLOSEST(t - ABSOLUTE_ZERO_MILLICELSIUS, 100);
> +}
> +
> +#endif /* _LINUX_TEMPERATURE_H */
> 


-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog


_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

  reply index

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-28 14:54 [PATCH v2 0/8] " Akinobu Mita
2019-11-28 14:54 ` [PATCH v2 1/8] " Akinobu Mita
2019-12-06 16:49   ` Daniel Lezcano [this message]
2019-12-07 15:57     ` Akinobu Mita
2019-11-28 14:54 ` [PATCH v2 2/8] ACPI: thermal: switch to use <linux/temperature.h> helpers Akinobu Mita
2019-11-28 14:54 ` [PATCH v2 3/8] platform/x86: asus-wmi: " Akinobu Mita
2019-11-28 14:54 ` [PATCH v2 4/8] platform/x86: intel_menlow: " Akinobu Mita
2019-11-28 15:02   ` Andy Shevchenko
2019-11-28 14:54 ` [PATCH v2 5/8] thermal: int340x: " Akinobu Mita
2019-11-28 14:54 ` [PATCH v2 6/8] thermal: intel_pch: " Akinobu Mita
2019-11-28 14:54 ` [PATCH v2 7/8] nvme: hwmon: " Akinobu Mita
2019-11-28 15:14   ` Guenter Roeck
2019-12-11 18:33   ` Keith Busch
2019-11-28 14:54 ` [PATCH v2 8/8] thermal: remove kelvin to/from Celsius conversion helpers from <linux/thermal.h> Akinobu Mita

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5f85f65c-78b6-0b63-f975-a216f9823985@linaro.org \
    --to=daniel.lezcano@linaro.org \
    --cc=akinobu.mita@gmail.com \
    --cc=amit.kucheria@verdurent.com \
    --cc=andy@infradead.org \
    --cc=axboe@fb.com \
    --cc=dvhart@infradead.org \
    --cc=hch@lst.de \
    --cc=jdelvare@suse.com \
    --cc=kbusch@kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=rui.zhang@intel.com \
    --cc=sagi@grimberg.me \
    --cc=sujith.thomas@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-NVME Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-nvme/0 linux-nvme/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-nvme linux-nvme/ https://lore.kernel.org/linux-nvme \
		linux-nvme@lists.infradead.org
	public-inbox-index linux-nvme

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-nvme


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git