Linux-NVME Archive on
 help / color / Atom feed
From: "Wunderlich, Mark" <>
To: Sagi Grimberg <>,
	"" <>
Subject: RE: [PATCH 0/2] allow for busy poll improvements
Date: Thu, 7 Nov 2019 16:09:05 +0000
Message-ID: <> (raw)
In-Reply-To: <>

>> Proposing a small series of two patches that provide for improved 
>> packet processing for a fabric network interface that is operating 
>> with poll mode enabled


>Can we start with a series for the SO_PRIORITY for the host and the target first? IIRC you mentioned that enabling this alone will produce an improvement >and the change is completely harmless.

>Then we can add the polling change in an incremental series on that.

OK, will re-submit new series for host and target so_priority change.
Linux-nvme mailing list

      reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-30 22:27 Wunderlich, Mark
2019-11-06 16:44 ` Sagi Grimberg
2019-11-07 16:09   ` Wunderlich, Mark [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-NVME Archive on

Archives are clonable:
	git clone --mirror linux-nvme/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-nvme linux-nvme/ \
	public-inbox-index linux-nvme

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone