[PATCH 0/8] add header file for kelvin to/from Celsius conversion helpers

[PATCH 0/8] add header file for kelvin to/from Celsius conversion helpers

[Akinobu Mita]

There are several helper macros to convert kelvin to/from Celsius in
<linux/thermal.h> for thermal drivers.  These are useful for any other
drivers or subsystems, but it's odd to include <linux/thermal.h> just for
the helpers.

This adds a new <linux/temperature.h> that provides the equivalent inline
functions for any drivers or subsystems, and switches all the users of
conversion helpers in <linux/thermal.h> to use <linux/temperature.h>
helpers.

Akinobu Mita (8):
  add header file for kelvin to/from Celsius conversion helpers
  ACPI: thermal: switch to use <linux/temperature.h> helpers
  platform/x86: asus-wmi: switch to use <linux/temperature.h> helpers
  platform/x86: intel_menlow: switch to use <linux/temperature.h>
    helpers
  thermal: int340x: switch to use <linux/temperature.h> helpers
  thermal: intel_pch: switch to use <linux/temperature.h> helpers
  nvme: hwmon: switch to use <linux/temperature.h> helpers
  thermal: remove kelvin to/from Celsius conversion helpers from
    <linux/thermal.h>

 drivers/acpi/thermal.c                             | 17 ++++++----
 drivers/nvme/host/hwmon.c                          | 13 +++-----
 drivers/platform/x86/asus-wmi.c                    |  7 ++--
 drivers/platform/x86/intel_menlow.c                |  8 +++--
 .../intel/int340x_thermal/int340x_thermal_zone.c   |  6 ++--
 drivers/thermal/intel/intel_pch_thermal.c          |  2 +-
 include/linux/temperature.h                        | 39 ++++++++++++++++++++++
 include/linux/thermal.h                            | 12 +------
 8 files changed, 68 insertions(+), 36 deletions(-)
 create mode 100644 include/linux/temperature.h

Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
-- 
2.7.4


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

[PATCH 1/8] add header file for kelvin to/from Celsius conversion helpers

[Akinobu Mita]

There are several helper macros to convert kelvin to/from Celsius in
<linux/thermal.h> for thermal drivers.  These are useful for any other
drivers or subsystems, but it's odd to include <linux/thermal.h> just for
the helpers.

This adds a new <linux/temperature.h> that provides the equivalent inline
functions for any drivers or subsystems.  It is intended to replace the
helpers in <linux/thermal.h>.

Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
 include/linux/temperature.h | 39 +++++++++++++++++++++++++++++++++++++++
 include/linux/thermal.h     |  1 +
 2 files changed, 40 insertions(+)
 create mode 100644 include/linux/temperature.h

diff --git a/include/linux/temperature.h b/include/linux/temperature.h
new file mode 100644
index 0000000..d7e2aed
--- /dev/null
+++ b/include/linux/temperature.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_TEMPERATURE_H
+#define _LINUX_TEMPERATURE_H
+
+#include <linux/kernel.h>
+
+#define ABSOLUTE_ZERO_MILLICELSIUS -273150
+
+static inline long kelvin_to_millicelsius(long t)
+{
+	return t * 1000 + ABSOLUTE_ZERO_MILLICELSIUS;
+}
+
+static inline long millicelsius_to_kelvin(long t)
+{
+	return DIV_ROUND_CLOSEST(t - ABSOLUTE_ZERO_MILLICELSIUS, 1000);
+}
+
+static inline long deci_kelvin_to_celsius(long t)
+{
+	return DIV_ROUND_CLOSEST(t * 100 + ABSOLUTE_ZERO_MILLICELSIUS, 1000);
+}
+
+static inline long celsius_to_deci_kelvin(long t)
+{
+	return t * 10 - DIV_ROUND_CLOSEST(ABSOLUTE_ZERO_MILLICELSIUS, 100);
+}
+
+static inline long deci_kelvin_to_millicelsius(long t)
+{
+	return t * 100 + ABSOLUTE_ZERO_MILLICELSIUS;
+}
+
+static inline long millicelsius_to_deci_kelvin(long t)
+{
+	return DIV_ROUND_CLOSEST(t - ABSOLUTE_ZERO_MILLICELSIUS, 100);
+}
+
+#endif /* _LINUX_TEMPERATURE_H */
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index e45659c..ed549e4 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -14,6 +14,7 @@
 #include <linux/idr.h>
 #include <linux/device.h>
 #include <linux/sysfs.h>
+#include <linux/temperature.h>
 #include <linux/workqueue.h>
 #include <uapi/linux/thermal.h>
 
-- 
2.7.4


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH 1/8] add header file for kelvin to/from Celsius conversion helpers

[Andy Shevchenko]

On Sun, Nov 24, 2019 at 4:09 PM Akinobu Mita <akinobu.mita@gmail.com> wrote:
>
> There are several helper macros to convert kelvin to/from Celsius in
> <linux/thermal.h> for thermal drivers.  These are useful for any other
> drivers or subsystems, but it's odd to include <linux/thermal.h> just for
> the helpers.
>
> This adds a new <linux/temperature.h> that provides the equivalent inline
> functions for any drivers or subsystems.  It is intended to replace the
> helpers in <linux/thermal.h>.
>
> Cc: Sujith Thomas <sujith.thomas@intel.com>
> Cc: Darren Hart <dvhart@infradead.org>
> Cc: Andy Shevchenko <andy@infradead.org>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Eduardo Valentin <edubezval@gmail.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Amit Kucheria <amit.kucheria@verdurent.com>
> Cc: Jean Delvare <jdelvare@suse.com>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Keith Busch <kbusch@kernel.org>
> Cc: Jens Axboe <axboe@fb.com>
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Sagi Grimberg <sagi@grimberg.me>
> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
> ---
>  include/linux/temperature.h | 39 +++++++++++++++++++++++++++++++++++++++

>  include/linux/thermal.h     |  1 +


> --- a/include/linux/thermal.h
> +++ b/include/linux/thermal.h
> @@ -14,6 +14,7 @@
>  #include <linux/idr.h>
>  #include <linux/device.h>
>  #include <linux/sysfs.h>
> +#include <linux/temperature.h>
>  #include <linux/workqueue.h>
>  #include <uapi/linux/thermal.h>

I don't see any users of it. Why did you include?

-- 
With Best Regards,
Andy Shevchenko

_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH 1/8] add header file for kelvin to/from Celsius conversion helpers

[Akinobu Mita]

2019年11月24日(日) 23:57 Andy Shevchenko <andy.shevchenko@gmail.com>:
>
> On Sun, Nov 24, 2019 at 4:09 PM Akinobu Mita <akinobu.mita@gmail.com> wrote:
> >
> > There are several helper macros to convert kelvin to/from Celsius in
> > <linux/thermal.h> for thermal drivers.  These are useful for any other
> > drivers or subsystems, but it's odd to include <linux/thermal.h> just for
> > the helpers.
> >
> > This adds a new <linux/temperature.h> that provides the equivalent inline
> > functions for any drivers or subsystems.  It is intended to replace the
> > helpers in <linux/thermal.h>.
> >
> > Cc: Sujith Thomas <sujith.thomas@intel.com>
> > Cc: Darren Hart <dvhart@infradead.org>
> > Cc: Andy Shevchenko <andy@infradead.org>
> > Cc: Zhang Rui <rui.zhang@intel.com>
> > Cc: Eduardo Valentin <edubezval@gmail.com>
> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> > Cc: Amit Kucheria <amit.kucheria@verdurent.com>
> > Cc: Jean Delvare <jdelvare@suse.com>
> > Cc: Guenter Roeck <linux@roeck-us.net>
> > Cc: Keith Busch <kbusch@kernel.org>
> > Cc: Jens Axboe <axboe@fb.com>
> > Cc: Christoph Hellwig <hch@lst.de>
> > Cc: Sagi Grimberg <sagi@grimberg.me>
> > Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
> > ---
> >  include/linux/temperature.h | 39 +++++++++++++++++++++++++++++++++++++++
>
> >  include/linux/thermal.h     |  1 +
>
>
> > --- a/include/linux/thermal.h
> > +++ b/include/linux/thermal.h
> > @@ -14,6 +14,7 @@
> >  #include <linux/idr.h>
> >  #include <linux/device.h>
> >  #include <linux/sysfs.h>
> > +#include <linux/temperature.h>
> >  #include <linux/workqueue.h>
> >  #include <uapi/linux/thermal.h>
>
> I don't see any users of it. Why did you include?

The rest of this patch series starts using it.

I decided to include <linux/temperature.h> from <linux/thermal.h> because
the existing <linux/thermal.h> provides the conversion helpers.

However, not all of the thermal drivers require these conversion helpers,
so we can change to include <linux/temperature.h> from each thermal driver
instead of including it from <linux/thermal.h>.

Which way do you prefer?

_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH 1/8] add header file for kelvin to/from Celsius conversion helpers

[Andy Shevchenko]

On Mon, Nov 25, 2019 at 4:30 PM Akinobu Mita <akinobu.mita@gmail.com> wrote:
> 2019年11月24日(日) 23:57 Andy Shevchenko <andy.shevchenko@gmail.com>:
> > On Sun, Nov 24, 2019 at 4:09 PM Akinobu Mita <akinobu.mita@gmail.com> wrote:

> > >  include/linux/thermal.h     |  1 +

> > > --- a/include/linux/thermal.h
> > > +++ b/include/linux/thermal.h
> > > @@ -14,6 +14,7 @@
> > >  #include <linux/idr.h>
> > >  #include <linux/device.h>
> > >  #include <linux/sysfs.h>
> > > +#include <linux/temperature.h>
> > >  #include <linux/workqueue.h>
> > >  #include <uapi/linux/thermal.h>
> >
> > I don't see any users of it. Why did you include?
>
> The rest of this patch series starts using it.
>
> I decided to include <linux/temperature.h> from <linux/thermal.h> because
> the existing <linux/thermal.h> provides the conversion helpers.
>
> However, not all of the thermal drivers require these conversion helpers,
> so we can change to include <linux/temperature.h> from each thermal driver
> instead of including it from <linux/thermal.h>.
>
> Which way do you prefer?

I think users should include new header explicitly.

-- 
With Best Regards,
Andy Shevchenko

_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

[PATCH 2/8] ACPI: thermal: switch to use <linux/temperature.h> helpers

[Akinobu Mita]

This switches the ACPI thermal zone driver to use celsius_to_deci_kelvin()
and deci_kelvin_to_celsius() in <linux/temperature.h> instead of helpers
in <linux/thermal.h>.

This is preparation for centralizing the kelvin to/from Celsius conversion
helpers in <linux/temprature.h>.

Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
 drivers/acpi/thermal.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index d831a61..bd9b6eb 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -297,7 +297,9 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 			if (crt == -1) {
 				tz->trips.critical.flags.valid = 0;
 			} else if (crt > 0) {
-				unsigned long crt_k = CELSIUS_TO_DECI_KELVIN(crt);
+				unsigned long crt_k =
+					celsius_to_deci_kelvin(crt);
+
 				/*
 				 * Allow override critical threshold
 				 */
@@ -333,7 +335,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 		if (psv == -1) {
 			status = AE_SUPPORT;
 		} else if (psv > 0) {
-			tmp = CELSIUS_TO_DECI_KELVIN(psv);
+			tmp = celsius_to_deci_kelvin(psv);
 			status = AE_OK;
 		} else {
 			status = acpi_evaluate_integer(tz->device->handle,
@@ -413,7 +415,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 					break;
 				if (i == 1)
 					tz->trips.active[0].temperature =
-						CELSIUS_TO_DECI_KELVIN(act);
+						celsius_to_deci_kelvin(act);
 				else
 					/*
 					 * Don't allow override higher than
@@ -421,9 +423,9 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 					 */
 					tz->trips.active[i - 1].temperature =
 						(tz->trips.active[i - 2].temperature <
-						CELSIUS_TO_DECI_KELVIN(act) ?
+						celsius_to_deci_kelvin(act) ?
 						tz->trips.active[i - 2].temperature :
-						CELSIUS_TO_DECI_KELVIN(act));
+						celsius_to_deci_kelvin(act));
 				break;
 			} else {
 				tz->trips.active[i].temperature = tmp;
@@ -1087,7 +1089,8 @@ static int acpi_thermal_add(struct acpi_device *device)
 	INIT_WORK(&tz->thermal_check_work, acpi_thermal_check_fn);
 
 	pr_info(PREFIX "%s [%s] (%ld C)\n", acpi_device_name(device),
-		acpi_device_bid(device), DECI_KELVIN_TO_CELSIUS(tz->temperature));
+		acpi_device_bid(device),
+		deci_kelvin_to_celsius(tz->temperature));
 	goto end;
 
 free_memory:
-- 
2.7.4


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH 2/8] ACPI: thermal: switch to use <linux/temperature.h> helpers

[Guenter Roeck]

On 11/24/19 6:08 AM, Akinobu Mita wrote:
> This switches the ACPI thermal zone driver to use celsius_to_deci_kelvin()
> and deci_kelvin_to_celsius() in <linux/temperature.h> instead of helpers
> in <linux/thermal.h>.
> 
> This is preparation for centralizing the kelvin to/from Celsius conversion
> helpers in <linux/temprature.h>.
> 
s/temprature/temperature/

Looks like this applies to all patches.

> Cc: Sujith Thomas <sujith.thomas@intel.com>
> Cc: Darren Hart <dvhart@infradead.org>
> Cc: Andy Shevchenko <andy@infradead.org>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Eduardo Valentin <edubezval@gmail.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Amit Kucheria <amit.kucheria@verdurent.com>
> Cc: Jean Delvare <jdelvare@suse.com>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Keith Busch <kbusch@kernel.org>
> Cc: Jens Axboe <axboe@fb.com>
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Sagi Grimberg <sagi@grimberg.me>
> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
> ---
>   drivers/acpi/thermal.c | 15 +++++++++------
>   1 file changed, 9 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
> index d831a61..bd9b6eb 100644
> --- a/drivers/acpi/thermal.c
> +++ b/drivers/acpi/thermal.c
> @@ -297,7 +297,9 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
>   			if (crt == -1) {
>   				tz->trips.critical.flags.valid = 0;
>   			} else if (crt > 0) {
> -				unsigned long crt_k = CELSIUS_TO_DECI_KELVIN(crt);
> +				unsigned long crt_k =
> +					celsius_to_deci_kelvin(crt);
> +

>   				/*
>   				 * Allow override critical threshold
>   				 */
> @@ -333,7 +335,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
>   		if (psv == -1) {
>   			status = AE_SUPPORT;
>   		} else if (psv > 0) {
> -			tmp = CELSIUS_TO_DECI_KELVIN(psv);
> +			tmp = celsius_to_deci_kelvin(psv);
>   			status = AE_OK;
>   		} else {
>   			status = acpi_evaluate_integer(tz->device->handle,
> @@ -413,7 +415,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
>   					break;
>   				if (i == 1)
>   					tz->trips.active[0].temperature =
> -						CELSIUS_TO_DECI_KELVIN(act);
> +						celsius_to_deci_kelvin(act);
>   				else
>   					/*
>   					 * Don't allow override higher than
> @@ -421,9 +423,9 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
>   					 */
>   					tz->trips.active[i - 1].temperature =
>   						(tz->trips.active[i - 2].temperature <
> -						CELSIUS_TO_DECI_KELVIN(act) ?
> +						celsius_to_deci_kelvin(act) ?
>   						tz->trips.active[i - 2].temperature :
> -						CELSIUS_TO_DECI_KELVIN(act));
> +						celsius_to_deci_kelvin(act));
>   				break;
>   			} else {
>   				tz->trips.active[i].temperature = tmp;
> @@ -1087,7 +1089,8 @@ static int acpi_thermal_add(struct acpi_device *device)
>   	INIT_WORK(&tz->thermal_check_work, acpi_thermal_check_fn);
>   
>   	pr_info(PREFIX "%s [%s] (%ld C)\n", acpi_device_name(device),
> -		acpi_device_bid(device), DECI_KELVIN_TO_CELSIUS(tz->temperature));
> +		acpi_device_bid(device),
> +		deci_kelvin_to_celsius(tz->temperature));
>   	goto end;
>   
>   free_memory:
> 


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH 2/8] ACPI: thermal: switch to use <linux/temperature.h> helpers

[Akinobu Mita]

2019年11月25日(月) 0:17 Guenter Roeck <linux@roeck-us.net>:
>
> On 11/24/19 6:08 AM, Akinobu Mita wrote:
> > This switches the ACPI thermal zone driver to use celsius_to_deci_kelvin()
> > and deci_kelvin_to_celsius() in <linux/temperature.h> instead of helpers
> > in <linux/thermal.h>.
> >
> > This is preparation for centralizing the kelvin to/from Celsius conversion
> > helpers in <linux/temprature.h>.
> >
> s/temprature/temperature/
>
> Looks like this applies to all patches.

Oops.  I'll fix in the next version.

_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

[PATCH 3/8] platform/x86: asus-wmi: switch to use <linux/temperature.h> helpers

[Akinobu Mita]

The asus-wmi driver doesn't implement the thermal device functionality
directly, so including <linux/thermal.h> just for DECI_KELVIN_TO_CELSIUS()
is a bit odd.

This switches the asus-wmi driver to use deci_kelvin_to_millicelsius() in
<linux/temperature.h>.

Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
 drivers/platform/x86/asus-wmi.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 821b08e..6a1a2f9 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -33,7 +33,7 @@
 #include <linux/seq_file.h>
 #include <linux/platform_data/x86/asus-wmi.h>
 #include <linux/platform_device.h>
-#include <linux/thermal.h>
+#include <linux/temperature.h>
 #include <linux/acpi.h>
 #include <linux/dmi.h>
 
@@ -1512,9 +1512,8 @@ static ssize_t asus_hwmon_temp1(struct device *dev,
 	if (err < 0)
 		return err;
 
-	value = DECI_KELVIN_TO_CELSIUS((value & 0xFFFF)) * 1000;
-
-	return sprintf(buf, "%d\n", value);
+	return sprintf(buf, "%ld\n",
+		       deci_kelvin_to_millicelsius(value & 0xFFFF));
 }
 
 /* Fan1 */
-- 
2.7.4


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH 3/8] platform/x86: asus-wmi: switch to use <linux/temperature.h> helpers

[Andy Shevchenko]

On Sun, Nov 24, 2019 at 4:09 PM Akinobu Mita <akinobu.mita@gmail.com> wrote:
>
> The asus-wmi driver doesn't implement the thermal device functionality
> directly, so including <linux/thermal.h> just for DECI_KELVIN_TO_CELSIUS()
> is a bit odd.
>
> This switches the asus-wmi driver to use deci_kelvin_to_millicelsius() in
> <linux/temperature.h>.
>
> Cc: Sujith Thomas <sujith.thomas@intel.com>
> Cc: Darren Hart <dvhart@infradead.org>
> Cc: Andy Shevchenko <andy@infradead.org>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Eduardo Valentin <edubezval@gmail.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Amit Kucheria <amit.kucheria@verdurent.com>
> Cc: Jean Delvare <jdelvare@suse.com>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Keith Busch <kbusch@kernel.org>
> Cc: Jens Axboe <axboe@fb.com>
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Sagi Grimberg <sagi@grimberg.me>
> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
> ---
>  drivers/platform/x86/asus-wmi.c | 7 +++----
>  1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
> index 821b08e..6a1a2f9 100644
> --- a/drivers/platform/x86/asus-wmi.c
> +++ b/drivers/platform/x86/asus-wmi.c
> @@ -33,7 +33,7 @@
>  #include <linux/seq_file.h>
>  #include <linux/platform_data/x86/asus-wmi.h>
>  #include <linux/platform_device.h>
> -#include <linux/thermal.h>
> +#include <linux/temperature.h>
>  #include <linux/acpi.h>
>  #include <linux/dmi.h>
>
> @@ -1512,9 +1512,8 @@ static ssize_t asus_hwmon_temp1(struct device *dev,
>         if (err < 0)
>                 return err;
>
> -       value = DECI_KELVIN_TO_CELSIUS((value & 0xFFFF)) * 1000;
> -
> -       return sprintf(buf, "%d\n", value);

> +       return sprintf(buf, "%ld\n",
> +                      deci_kelvin_to_millicelsius(value & 0xFFFF));

Leave it in one line.

With above,
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>

>  }
>
>  /* Fan1 */
> --
> 2.7.4
>


-- 
With Best Regards,
Andy Shevchenko

_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH 3/8] platform/x86: asus-wmi: switch to use <linux/temperature.h> helpers

[Akinobu Mita]

2019年11月25日(月) 4:54 Andy Shevchenko <andy.shevchenko@gmail.com>:
>
> On Sun, Nov 24, 2019 at 4:09 PM Akinobu Mita <akinobu.mita@gmail.com> wrote:
> >
> > The asus-wmi driver doesn't implement the thermal device functionality
> > directly, so including <linux/thermal.h> just for DECI_KELVIN_TO_CELSIUS()
> > is a bit odd.
> >
> > This switches the asus-wmi driver to use deci_kelvin_to_millicelsius() in
> > <linux/temperature.h>.
> >
> > Cc: Sujith Thomas <sujith.thomas@intel.com>
> > Cc: Darren Hart <dvhart@infradead.org>
> > Cc: Andy Shevchenko <andy@infradead.org>
> > Cc: Zhang Rui <rui.zhang@intel.com>
> > Cc: Eduardo Valentin <edubezval@gmail.com>
> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> > Cc: Amit Kucheria <amit.kucheria@verdurent.com>
> > Cc: Jean Delvare <jdelvare@suse.com>
> > Cc: Guenter Roeck <linux@roeck-us.net>
> > Cc: Keith Busch <kbusch@kernel.org>
> > Cc: Jens Axboe <axboe@fb.com>
> > Cc: Christoph Hellwig <hch@lst.de>
> > Cc: Sagi Grimberg <sagi@grimberg.me>
> > Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
> > ---
> >  drivers/platform/x86/asus-wmi.c | 7 +++----
> >  1 file changed, 3 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
> > index 821b08e..6a1a2f9 100644
> > --- a/drivers/platform/x86/asus-wmi.c
> > +++ b/drivers/platform/x86/asus-wmi.c
> > @@ -33,7 +33,7 @@
> >  #include <linux/seq_file.h>
> >  #include <linux/platform_data/x86/asus-wmi.h>
> >  #include <linux/platform_device.h>
> > -#include <linux/thermal.h>
> > +#include <linux/temperature.h>
> >  #include <linux/acpi.h>
> >  #include <linux/dmi.h>
> >
> > @@ -1512,9 +1512,8 @@ static ssize_t asus_hwmon_temp1(struct device *dev,
> >         if (err < 0)
> >                 return err;
> >
> > -       value = DECI_KELVIN_TO_CELSIUS((value & 0xFFFF)) * 1000;
> > -
> > -       return sprintf(buf, "%d\n", value);
>
> > +       return sprintf(buf, "%ld\n",
> > +                      deci_kelvin_to_millicelsius(value & 0xFFFF));
>
> Leave it in one line.

It causes this line over 80 characters.  Or do you prefer to save the
conversion result in 'value' temporarily as before?

_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH 3/8] platform/x86: asus-wmi: switch to use <linux/temperature.h> helpers

[Andy Shevchenko]

On Mon, Nov 25, 2019 at 4:32 PM Akinobu Mita <akinobu.mita@gmail.com> wrote:
> 2019年11月25日(月) 4:54 Andy Shevchenko <andy.shevchenko@gmail.com>:
> > On Sun, Nov 24, 2019 at 4:09 PM Akinobu Mita <akinobu.mita@gmail.com> wrote:

> > > -       value = DECI_KELVIN_TO_CELSIUS((value & 0xFFFF)) * 1000;
> > > -
> > > -       return sprintf(buf, "%d\n", value);
> >
> > > +       return sprintf(buf, "%ld\n",
> > > +                      deci_kelvin_to_millicelsius(value & 0xFFFF));
> >
> > Leave it in one line.
>
> It causes this line over 80 characters.

And I don't care.

>  Or do you prefer to save the
> conversion result in 'value' temporarily as before?

No.

-- 
With Best Regards,
Andy Shevchenko

_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

[PATCH 4/8] platform/x86: intel_menlow: switch to use <linux/temperature.h> helpers

[Akinobu Mita]

This switches the intel_menlow driver to use deci_kelvin_to_celsius() and
celsius_to_deci_kelvin() in <linux/temperature.h> instead of helpers in
<linux/thermal.h>.

This is preparation for centralizing the kelvin to/from Celsius conversion
helpers in <linux/temprature.h>.

Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
 drivers/platform/x86/intel_menlow.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/x86/intel_menlow.c b/drivers/platform/x86/intel_menlow.c
index b102f6d..6313591 100644
--- a/drivers/platform/x86/intel_menlow.c
+++ b/drivers/platform/x86/intel_menlow.c
@@ -302,8 +302,10 @@ static ssize_t aux_show(struct device *dev, struct device_attribute *dev_attr,
 	int result;
 
 	result = sensor_get_auxtrip(attr->handle, idx, &value);
+	if (result)
+		return result;
 
-	return result ? result : sprintf(buf, "%lu", DECI_KELVIN_TO_CELSIUS(value));
+	return sprintf(buf, "%ld", deci_kelvin_to_celsius(value));
 }
 
 static ssize_t aux0_show(struct device *dev,
@@ -332,8 +334,8 @@ static ssize_t aux_store(struct device *dev, struct device_attribute *dev_attr,
 	if (value < 0)
 		return -EINVAL;
 
-	result = sensor_set_auxtrip(attr->handle, idx, 
-				    CELSIUS_TO_DECI_KELVIN(value));
+	result = sensor_set_auxtrip(attr->handle, idx,
+				    celsius_to_deci_kelvin(value));
 	return result ? result : count;
 }
 
-- 
2.7.4


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH 4/8] platform/x86: intel_menlow: switch to use <linux/temperature.h> helpers

[Andy Shevchenko]

On Sun, Nov 24, 2019 at 4:09 PM Akinobu Mita <akinobu.mita@gmail.com> wrote:
>
> This switches the intel_menlow driver to use deci_kelvin_to_celsius() and
> celsius_to_deci_kelvin() in <linux/temperature.h> instead of helpers in
> <linux/thermal.h>.
>
> This is preparation for centralizing the kelvin to/from Celsius conversion
> helpers in <linux/temprature.h>.
>
> Cc: Sujith Thomas <sujith.thomas@intel.com>
> Cc: Darren Hart <dvhart@infradead.org>
> Cc: Andy Shevchenko <andy@infradead.org>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Eduardo Valentin <edubezval@gmail.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Amit Kucheria <amit.kucheria@verdurent.com>
> Cc: Jean Delvare <jdelvare@suse.com>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Keith Busch <kbusch@kernel.org>
> Cc: Jens Axboe <axboe@fb.com>
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Sagi Grimberg <sagi@grimberg.me>
> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
> ---
>  drivers/platform/x86/intel_menlow.c | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/platform/x86/intel_menlow.c b/drivers/platform/x86/intel_menlow.c
> index b102f6d..6313591 100644
> --- a/drivers/platform/x86/intel_menlow.c
> +++ b/drivers/platform/x86/intel_menlow.c
> @@ -302,8 +302,10 @@ static ssize_t aux_show(struct device *dev, struct device_attribute *dev_attr,
>         int result;
>
>         result = sensor_get_auxtrip(attr->handle, idx, &value);
> +       if (result)
> +               return result;
>
> -       return result ? result : sprintf(buf, "%lu", DECI_KELVIN_TO_CELSIUS(value));
> +       return sprintf(buf, "%ld", deci_kelvin_to_celsius(value));

Can you explain the change %lu to %ld?

>  }
>
>  static ssize_t aux0_show(struct device *dev,
> @@ -332,8 +334,8 @@ static ssize_t aux_store(struct device *dev, struct device_attribute *dev_attr,
>         if (value < 0)
>                 return -EINVAL;
>
> -       result = sensor_set_auxtrip(attr->handle, idx,
> -                                   CELSIUS_TO_DECI_KELVIN(value));

> +       result = sensor_set_auxtrip(attr->handle, idx,
> +                                   celsius_to_deci_kelvin(value));

How come the first line has been changed?

>         return result ? result : count;
>  }
>
> --
> 2.7.4
>


-- 
With Best Regards,
Andy Shevchenko

_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH 4/8] platform/x86: intel_menlow: switch to use <linux/temperature.h> helpers

[Akinobu Mita]

2019年11月25日(月) 4:58 Andy Shevchenko <andy.shevchenko@gmail.com>:
>
> On Sun, Nov 24, 2019 at 4:09 PM Akinobu Mita <akinobu.mita@gmail.com> wrote:
> >
> > This switches the intel_menlow driver to use deci_kelvin_to_celsius() and
> > celsius_to_deci_kelvin() in <linux/temperature.h> instead of helpers in
> > <linux/thermal.h>.
> >
> > This is preparation for centralizing the kelvin to/from Celsius conversion
> > helpers in <linux/temprature.h>.
> >
> > Cc: Sujith Thomas <sujith.thomas@intel.com>
> > Cc: Darren Hart <dvhart@infradead.org>
> > Cc: Andy Shevchenko <andy@infradead.org>
> > Cc: Zhang Rui <rui.zhang@intel.com>
> > Cc: Eduardo Valentin <edubezval@gmail.com>
> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> > Cc: Amit Kucheria <amit.kucheria@verdurent.com>
> > Cc: Jean Delvare <jdelvare@suse.com>
> > Cc: Guenter Roeck <linux@roeck-us.net>
> > Cc: Keith Busch <kbusch@kernel.org>
> > Cc: Jens Axboe <axboe@fb.com>
> > Cc: Christoph Hellwig <hch@lst.de>
> > Cc: Sagi Grimberg <sagi@grimberg.me>
> > Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
> > ---
> >  drivers/platform/x86/intel_menlow.c | 8 +++++---
> >  1 file changed, 5 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/platform/x86/intel_menlow.c b/drivers/platform/x86/intel_menlow.c
> > index b102f6d..6313591 100644
> > --- a/drivers/platform/x86/intel_menlow.c
> > +++ b/drivers/platform/x86/intel_menlow.c
> > @@ -302,8 +302,10 @@ static ssize_t aux_show(struct device *dev, struct device_attribute *dev_attr,
> >         int result;
> >
> >         result = sensor_get_auxtrip(attr->handle, idx, &value);
> > +       if (result)
> > +               return result;
> >
> > -       return result ? result : sprintf(buf, "%lu", DECI_KELVIN_TO_CELSIUS(value));
> > +       return sprintf(buf, "%ld", deci_kelvin_to_celsius(value));
>
> Can you explain the change %lu to %ld?

Isn't it possible for aux values to be lower than 0 degrees Celsius?

> >  }
> >
> >  static ssize_t aux0_show(struct device *dev,
> > @@ -332,8 +334,8 @@ static ssize_t aux_store(struct device *dev, struct device_attribute *dev_attr,
> >         if (value < 0)
> >                 return -EINVAL;
> >
> > -       result = sensor_set_auxtrip(attr->handle, idx,
> > -                                   CELSIUS_TO_DECI_KELVIN(value));
>
> > +       result = sensor_set_auxtrip(attr->handle, idx,
> > +                                   celsius_to_deci_kelvin(value));
>
> How come the first line has been changed?

Because the trailing space is removed.  I'll mention it in the commit log.

_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH 4/8] platform/x86: intel_menlow: switch to use <linux/temperature.h> helpers

[Andy Shevchenko]

On Mon, Nov 25, 2019 at 4:35 PM Akinobu Mita <akinobu.mita@gmail.com> wrote:
> 2019年11月25日(月) 4:58 Andy Shevchenko <andy.shevchenko@gmail.com>:
> > On Sun, Nov 24, 2019 at 4:09 PM Akinobu Mita <akinobu.mita@gmail.com> wrote:

> > > -       return result ? result : sprintf(buf, "%lu", DECI_KELVIN_TO_CELSIUS(value));
> > > +       return sprintf(buf, "%ld", deci_kelvin_to_celsius(value));
> >
> > Can you explain the change %lu to %ld?
>
> Isn't it possible for aux values to be lower than 0 degrees Celsius?

If it's a change due to requirement of new helpers, put it in the
commit message, otherwise leave as is.

-- 
With Best Regards,
Andy Shevchenko

_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH 4/8] platform/x86: intel_menlow: switch to use <linux/temperature.h> helpers

[Akinobu Mita]

2019年11月26日(火) 4:07 Andy Shevchenko <andy.shevchenko@gmail.com>:
>
> On Mon, Nov 25, 2019 at 4:35 PM Akinobu Mita <akinobu.mita@gmail.com> wrote:
> > 2019年11月25日(月) 4:58 Andy Shevchenko <andy.shevchenko@gmail.com>:
> > > On Sun, Nov 24, 2019 at 4:09 PM Akinobu Mita <akinobu.mita@gmail.com> wrote:
>
> > > > -       return result ? result : sprintf(buf, "%lu", DECI_KELVIN_TO_CELSIUS(value));
> > > > +       return sprintf(buf, "%ld", deci_kelvin_to_celsius(value));
> > >
> > > Can you explain the change %lu to %ld?
> >
> > Isn't it possible for aux values to be lower than 0 degrees Celsius?
>
> If it's a change due to requirement of new helpers, put it in the
> commit message, otherwise leave as is.

OK, I'll leave it as is.
The format string will be fixed by a separate patch.

_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

[PATCH 5/8] thermal: int340x: switch to use <linux/temperature.h> helpers

[Akinobu Mita]

This switches the int340x thermal zone driver to use
deci_kelvin_to_millicelsius() and millicelsius_to_deci_kelvin() in
<linux/temperature.h> instead of helpers in <linux/thermal.h>.

This is preparation for centralizing the kelvin to/from Celsius conversion
helpers in <linux/temprature.h>.

Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
 drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
index 75484d6..1e653f6 100644
--- a/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
+++ b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
@@ -34,7 +34,7 @@ static int int340x_thermal_get_zone_temp(struct thermal_zone_device *zone,
 		*temp = (unsigned long)conv_temp * 10;
 	} else
 		/* _TMP returns the temperature in tenths of degrees Kelvin */
-		*temp = DECI_KELVIN_TO_MILLICELSIUS(tmp);
+		*temp = deci_kelvin_to_millicelsius(tmp);
 
 	return 0;
 }
@@ -116,7 +116,7 @@ static int int340x_thermal_set_trip_temp(struct thermal_zone_device *zone,
 
 	snprintf(name, sizeof(name), "PAT%d", trip);
 	status = acpi_execute_simple_method(d->adev->handle, name,
-			MILLICELSIUS_TO_DECI_KELVIN(temp));
+			millicelsius_to_deci_kelvin(temp));
 	if (ACPI_FAILURE(status))
 		return -EIO;
 
@@ -163,7 +163,7 @@ static int int340x_thermal_get_trip_config(acpi_handle handle, char *name,
 	if (ACPI_FAILURE(status))
 		return -EIO;
 
-	*temp = DECI_KELVIN_TO_MILLICELSIUS(r);
+	*temp = deci_kelvin_to_millicelsius(r);
 
 	return 0;
 }
-- 
2.7.4


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

[PATCH 6/8] thermal: intel_pch: switch to use <linux/temperature.h> helpers

[Akinobu Mita]

This switches the intel pch thermal driver to use
deci_kelvin_to_millicelsius() in <linux/temperature.h> instead of helpers
in <linux/thermal.h>.

This is preparation for centralizing the kelvin to/from Celsius conversion
helpers in <linux/temprature.h>.

Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
 drivers/thermal/intel/intel_pch_thermal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/thermal/intel/intel_pch_thermal.c b/drivers/thermal/intel/intel_pch_thermal.c
index 4f0bb8f..3cce310 100644
--- a/drivers/thermal/intel/intel_pch_thermal.c
+++ b/drivers/thermal/intel/intel_pch_thermal.c
@@ -92,7 +92,7 @@ static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd,
 		if (ACPI_SUCCESS(status)) {
 			unsigned long trip_temp;
 
-			trip_temp = DECI_KELVIN_TO_MILLICELSIUS(r);
+			trip_temp = deci_kelvin_to_millicelsius(r);
 			if (trip_temp) {
 				ptd->psv_temp = trip_temp;
 				ptd->psv_trip_id = *nr_trips;
-- 
2.7.4


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH 6/8] thermal: intel_pch: switch to use <linux/temperature.h> helpers

[Guenter Roeck]

On 11/24/19 6:08 AM, Akinobu Mita wrote:
> This switches the intel pch thermal driver to use
> deci_kelvin_to_millicelsius() in <linux/temperature.h> instead of helpers
> in <linux/thermal.h>.
> 
> This is preparation for centralizing the kelvin to/from Celsius conversion
> helpers in <linux/temprature.h>.
> 
s/temprature/temperature/

> Cc: Sujith Thomas <sujith.thomas@intel.com>
> Cc: Darren Hart <dvhart@infradead.org>
> Cc: Andy Shevchenko <andy@infradead.org>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Eduardo Valentin <edubezval@gmail.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Amit Kucheria <amit.kucheria@verdurent.com>
> Cc: Jean Delvare <jdelvare@suse.com>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Keith Busch <kbusch@kernel.org>
> Cc: Jens Axboe <axboe@fb.com>
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Sagi Grimberg <sagi@grimberg.me>
> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
> ---
>   drivers/thermal/intel/intel_pch_thermal.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/thermal/intel/intel_pch_thermal.c b/drivers/thermal/intel/intel_pch_thermal.c
> index 4f0bb8f..3cce310 100644
> --- a/drivers/thermal/intel/intel_pch_thermal.c
> +++ b/drivers/thermal/intel/intel_pch_thermal.c
> @@ -92,7 +92,7 @@ static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd,
>   		if (ACPI_SUCCESS(status)) {
>   			unsigned long trip_temp;
>   
> -			trip_temp = DECI_KELVIN_TO_MILLICELSIUS(r);
> +			trip_temp = deci_kelvin_to_millicelsius(r);
>   			if (trip_temp) {
>   				ptd->psv_temp = trip_temp;
>   				ptd->psv_trip_id = *nr_trips;
> 


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

[PATCH 7/8] nvme: hwmon: switch to use <linux/temperature.h> helpers

[Akinobu Mita]

This switches the nvme driver to use kelvin_to_millicelsius() and
millicelsius_to_kelvin() in <linux/temperature.h>.

Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
 drivers/nvme/host/hwmon.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/nvme/host/hwmon.c b/drivers/nvme/host/hwmon.c
index a5af21f..14720c1 100644
--- a/drivers/nvme/host/hwmon.c
+++ b/drivers/nvme/host/hwmon.c
@@ -5,14 +5,11 @@
  */
 
 #include <linux/hwmon.h>
+#include <linux/temperature.h>
 #include <asm/unaligned.h>
 
 #include "nvme.h"
 
-/* These macros should be moved to linux/temperature.h */
-#define MILLICELSIUS_TO_KELVIN(t) DIV_ROUND_CLOSEST((t) + 273150, 1000)
-#define KELVIN_TO_MILLICELSIUS(t) ((t) * 1000L - 273150)
-
 struct nvme_hwmon_data {
 	struct nvme_ctrl *ctrl;
 	struct nvme_smart_log log;
@@ -35,7 +32,7 @@ static int nvme_get_temp_thresh(struct nvme_ctrl *ctrl, int sensor, bool under,
 		return -EIO;
 	if (ret < 0)
 		return ret;
-	*temp = KELVIN_TO_MILLICELSIUS(status & NVME_TEMP_THRESH_MASK);
+	*temp = kelvin_to_millicelsius(status & NVME_TEMP_THRESH_MASK);
 
 	return 0;
 }
@@ -46,7 +43,7 @@ static int nvme_set_temp_thresh(struct nvme_ctrl *ctrl, int sensor, bool under,
 	unsigned int threshold = sensor << NVME_TEMP_THRESH_SELECT_SHIFT;
 	int ret;
 
-	temp = MILLICELSIUS_TO_KELVIN(temp);
+	temp = millicelsius_to_kelvin(temp);
 	threshold |= clamp_val(temp, 0, NVME_TEMP_THRESH_MASK);
 
 	if (under)
@@ -88,7 +85,7 @@ static int nvme_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
 	case hwmon_temp_min:
 		return nvme_get_temp_thresh(data->ctrl, channel, true, val);
 	case hwmon_temp_crit:
-		*val = KELVIN_TO_MILLICELSIUS(data->ctrl->cctemp);
+		*val = kelvin_to_millicelsius(data->ctrl->cctemp);
 		return 0;
 	default:
 		break;
@@ -105,7 +102,7 @@ static int nvme_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
 			temp = get_unaligned_le16(log->temperature);
 		else
 			temp = le16_to_cpu(log->temp_sensor[channel - 1]);
-		*val = KELVIN_TO_MILLICELSIUS(temp);
+		*val = kelvin_to_millicelsius(temp);
 		break;
 	case hwmon_temp_alarm:
 		*val = !!(log->critical_warning & NVME_SMART_CRIT_TEMPERATURE);
-- 
2.7.4


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH 7/8] nvme: hwmon: switch to use <linux/temperature.h> helpers

[Christoph Hellwig]

On Sun, Nov 24, 2019 at 11:08:49PM +0900, Akinobu Mita wrote:
> This switches the nvme driver to use kelvin_to_millicelsius() and
> millicelsius_to_kelvin() in <linux/temperature.h>.

Looks good,

Reviewed-by: Christoph Hellwig <hch@lst.de>

_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

[PATCH 8/8] thermal: remove kelvin to/from Celsius conversion helpers from <linux/thermal.h>

[Akinobu Mita]

This removes the kelvin to/from Celsius conversion helpers in
<linux/thermal.h> which were switched to <linux/temperature.h> helpers.

DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET() is only used by ACPI thermal
zone driver and the usage is specific to the driver.  So this macro
is moved to the ACPI thermal driver rather than generic header.

Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
 drivers/acpi/thermal.c  |  2 ++
 include/linux/thermal.h | 11 -----------
 2 files changed, 2 insertions(+), 11 deletions(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index bd9b6eb..370e114 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -42,6 +42,8 @@
 #define ACPI_THERMAL_MAX_ACTIVE	10
 #define ACPI_THERMAL_MAX_LIMIT_STR_LEN 65
 
+#define DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(t, off) (((t) - (off)) * 100)
+
 #define _COMPONENT		ACPI_THERMAL_COMPONENT
 ACPI_MODULE_NAME("thermal");
 
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index ed549e4..06e1695 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -33,17 +33,6 @@
 /* use value, which < 0K, to indicate an invalid/uninitialized temperature */
 #define THERMAL_TEMP_INVALID	-274000
 
-/* Unit conversion macros */
-#define DECI_KELVIN_TO_CELSIUS(t)	({			\
-	long _t = (t);						\
-	((_t-2732 >= 0) ? (_t-2732+5)/10 : (_t-2732-5)/10);	\
-})
-#define CELSIUS_TO_DECI_KELVIN(t)	((t)*10+2732)
-#define DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(t, off) (((t) - (off)) * 100)
-#define DECI_KELVIN_TO_MILLICELSIUS(t) DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(t, 2732)
-#define MILLICELSIUS_TO_DECI_KELVIN_WITH_OFFSET(t, off) (((t) / 100) + (off))
-#define MILLICELSIUS_TO_DECI_KELVIN(t) MILLICELSIUS_TO_DECI_KELVIN_WITH_OFFSET(t, 2732)
-
 /* Default Thermal Governor */
 #if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE)
 #define DEFAULT_THERMAL_GOVERNOR       "step_wise"
-- 
2.7.4


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH 8/8] thermal: remove kelvin to/from Celsius conversion helpers from <linux/thermal.h>

[Andy Shevchenko]

On Sun, Nov 24, 2019 at 4:09 PM Akinobu Mita <akinobu.mita@gmail.com> wrote:
>
> This removes the kelvin to/from Celsius conversion helpers in
> <linux/thermal.h> which were switched to <linux/temperature.h> helpers.
>

> DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET() is only used by ACPI thermal
> zone driver and the usage is specific to the driver.  So this macro
> is moved to the ACPI thermal driver rather than generic header.

I didn't get this point. If we split all helpers, let's do it for all,
and not spreading macro per driver.

-- 
With Best Regards,
Andy Shevchenko

_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH 8/8] thermal: remove kelvin to/from Celsius conversion helpers from <linux/thermal.h>

[Akinobu Mita]

2019年11月25日(月) 5:00 Andy Shevchenko <andy.shevchenko@gmail.com>:
>
> On Sun, Nov 24, 2019 at 4:09 PM Akinobu Mita <akinobu.mita@gmail.com> wrote:
> >
> > This removes the kelvin to/from Celsius conversion helpers in
> > <linux/thermal.h> which were switched to <linux/temperature.h> helpers.
> >
>
> > DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET() is only used by ACPI thermal
> > zone driver and the usage is specific to the driver.  So this macro
> > is moved to the ACPI thermal driver rather than generic header.
>
> I didn't get this point. If we split all helpers, let's do it for all,
> and not spreading macro per driver.

OK, I'll add deci_kelvin_to_millicelsius_with_offset() in the header.
But the unit of 'offset' argument will be in millidegree instead of
decidegree, because it's a bit more generic.

_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

Re: [PATCH 8/8] thermal: remove kelvin to/from Celsius conversion helpers from <linux/thermal.h>

[Andy Shevchenko]

On Mon, Nov 25, 2019 at 4:40 PM Akinobu Mita <akinobu.mita@gmail.com> wrote:
> 2019年11月25日(月) 5:00 Andy Shevchenko <andy.shevchenko@gmail.com>:
> > On Sun, Nov 24, 2019 at 4:09 PM Akinobu Mita <akinobu.mita@gmail.com> wrote:

> > > DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET() is only used by ACPI thermal
> > > zone driver and the usage is specific to the driver.  So this macro
> > > is moved to the ACPI thermal driver rather than generic header.
> >
> > I didn't get this point. If we split all helpers, let's do it for all,
> > and not spreading macro per driver.
>
> OK, I'll add deci_kelvin_to_millicelsius_with_offset() in the header.

Thank you.

> But the unit of 'offset' argument will be in millidegree instead of
> decidegree, because it's a bit more generic.

It's fine as long as the helpers are consolidated and consistent.

-- 
With Best Regards,
Andy Shevchenko

_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme