linux-nvme.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 00/15] nvme-rdma/nvmet-rdma: Add metadata/T10-PI support
@ 2019-11-05 16:20 Max Gurtovoy
  2019-11-05 16:20 ` [PATCH] nvme-cli/fabrics: Add pi_enable param to connect cmd Max Gurtovoy
                   ` (15 more replies)
  0 siblings, 16 replies; 55+ messages in thread
From: Max Gurtovoy @ 2019-11-05 16:20 UTC (permalink / raw)
  To: linux-nvme, kbusch, hch, sagi
  Cc: vladimirk, idanb, israelr, shlomin, oren, maxg

Hello Sagi, Christoph, Keith, Jason and Co

This patchset adds metadata (T10-PI) support for NVMeoF/RDMA host side and
target side, using signature verbs API. This set starts with a few preparation
commits to the NVMe host core layer. It continues with NVMeoF/RDMA host
implementation + new bip flag patch + few preparation commits to the NVMe
target core layer. The patchset ends with NVMeoF/RDMA target implementation.

Configuration:
Host:
 - nvme connect --pi_enable --transport=rdma --traddr=10.0.1.1 --nqn=test-nvme

Target:
 - modprobe nvmet-rdma pi_enable=Y
 - echo 1 > /config/nvmet/subsystems/${NAME}/attr_pi_enable

The code was tested using Mellanox's ConnectX-4/ConnectX-5 HCA.
This series applies on top of nvme_5.5 branch cleanly.

Israel Rukshin (11):
  nvme-fabrics: allow user enabling metadata/T10-PI support
  block: Introduce BIP_NOMAP_INTEGRITY bip_flag
  nvmet: Prepare metadata request
  nvmet: Add metadata characteristics for a namespace
  nvmet: Rename nvmet_rw_len to nvmet_rw_data_len
  nvmet: Rename nvmet_check_data_len to nvmet_check_transfer_len
  nvmet: Introduce nvmet_rw_prot_len and nvmet_ns_has_pi
  nvme: Add Metadata Capabilities enumerations
  nvmet: Add metadata/T10-PI support
  nvmet: Add metadata support for block devices
  nvmet-rdma: Add metadata/T10-PI support

Max Gurtovoy (4):
  nvme: Fail __nvme_revalidate_disk in case of a spec violation
  nvme: Introduce max_integrity_segments ctrl attribute
  nvme: Inline nvme_ns_has_pi function
  nvme-rdma: Add metadata/T10-PI support

 block/t10-pi.c                    |   7 +
 drivers/nvme/host/core.c          |  55 +++---
 drivers/nvme/host/fabrics.c       |   5 +
 drivers/nvme/host/fabrics.h       |   3 +
 drivers/nvme/host/nvme.h          |   7 +
 drivers/nvme/host/pci.c           |   7 +
 drivers/nvme/host/rdma.c          | 346 ++++++++++++++++++++++++++++++++------
 drivers/nvme/target/admin-cmd.c   |  37 ++--
 drivers/nvme/target/configfs.c    |  24 +++
 drivers/nvme/target/core.c        |  54 ++++--
 drivers/nvme/target/discovery.c   |   8 +-
 drivers/nvme/target/fabrics-cmd.c |  19 ++-
 drivers/nvme/target/io-cmd-bdev.c | 105 +++++++++++-
 drivers/nvme/target/io-cmd-file.c |   8 +-
 drivers/nvme/target/nvmet.h       |  27 ++-
 drivers/nvme/target/rdma.c        | 221 ++++++++++++++++++++++--
 include/linux/bio.h               |   1 +
 include/linux/nvme.h              |   2 +
 18 files changed, 811 insertions(+), 125 deletions(-)

-- 
1.8.3.1


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply	[flat|nested] 55+ messages in thread
* [PATCH 00/16 V2] nvme-rdma/nvmet-rdma: Add metadata/T10-PI support
@ 2019-12-02 14:47 Max Gurtovoy
  2019-12-02 14:47 ` [PATCH] nvme-cli/fabrics: Add pi_enable param to connect cmd Max Gurtovoy
  0 siblings, 1 reply; 55+ messages in thread
From: Max Gurtovoy @ 2019-12-02 14:47 UTC (permalink / raw)
  To: linux-nvme, kbusch, hch, sagi, martin.petersen
  Cc: axboe, vladimirk, shlomin, israelr, idanb, oren, maxg

Hello Sagi, Christoph, Keith, Martin and Co

This patchset adds metadata (T10-PI) support for NVMeoF/RDMA host side and
target side, using signature verbs API. This set starts with a few preparation
commits to the NVMe host core layer. It continues with NVMeoF/RDMA host
implementation + BIP flag patch (block) + few preparation commits to the NVMe
target core layer. The patchset ends with NVMeoF/RDMA target implementation.

Configuration:
Host:
 - nvme connect --pi_enable --transport=rdma --traddr=10.0.1.1 --nqn=test-nvme

Target:
 - echo 1 > /config/nvmet/subsystems/${NAME}/attr_pi_enable
 - echo 1 > /config/nvmet/ports/${PORT_NUM}/param_pi_enable

The code was tested using Mellanox's ConnectX-4/ConnectX-5 HCAs.
This series applies on top of nvme_5.5 branch cleanly.

Changes from v1:
 - Added Reviewed-by signatures
 - Added namespace features flag (Patch 01/16)
 - Remove nvme_ns_has_pi function (Patch 01/16)
 - Added has_pi field to struct nvme_request (Patch 01/16)
 - Subject change for patch 02/16
 - Fix comment for PCI metadata (Patch 03/16)
 - Rebase over "nvme: Avoid preallocating big SGL for data" patchset
 - Introduce NVME_INLINE_PROT_SG_CNT flag (Patch 05/16)
 - Introduce nvme_rdma_sgl structure (Patch 06/16)
 - Remove first_sgl pointer from struct nvme_rdma_request (Patch 06/16)
 - Split nvme-rdma patches (Patches 06/16, 07/16)
 - Rename is_protected to use_pi (Patch 07/16)
 - Refactor nvme_rdma_get_max_fr_pages function (Patch 07/16)
 - Added ifdef CONFIG_BLK_DEV_INTEGRITY (Patches 07/16, 10/16, 14/16,
   15/16, 16/16)
 - Use existing BIP_MAPPED_INTEGRITY flag (Patches 08/16, 15/16)
 - Added port configfs pi_enable (Patch 14/16)

Israel Rukshin (13):
  nvme: Introduce namespace features flag
  nvme-fabrics: Allow user enabling metadata/T10-PI support
  nvme: Introduce NVME_INLINE_PROT_SG_CNT
  nvme-rdma: Introduce nvme_rdma_sgl structure
  block: Add a BIP_MAPPED_INTEGRITY check to complete_fn
  nvmet: Prepare metadata request
  nvmet: Add metadata characteristics for a namespace
  nvmet: Rename nvmet_rw_len to nvmet_rw_data_len
  nvmet: Rename nvmet_check_data_len to nvmet_check_transfer_len
  nvme: Add Metadata Capabilities enumerations
  nvmet: Add metadata/T10-PI support
  nvmet: Add metadata support for block devices
  nvmet-rdma: Add metadata/T10-PI support

Max Gurtovoy (3):
  nvme: Enforce extended LBA format for fabrics metadata
  nvme: Introduce max_integrity_segments ctrl attribute
  nvme-rdma: Add metadata/T10-PI support

 block/t10-pi.c                    |   4 +
 drivers/nvme/host/core.c          |  75 +++++---
 drivers/nvme/host/fabrics.c       |  11 ++
 drivers/nvme/host/fabrics.h       |   3 +
 drivers/nvme/host/nvme.h          |   9 +-
 drivers/nvme/host/pci.c           |   7 +
 drivers/nvme/host/rdma.c          | 368 +++++++++++++++++++++++++++++++++-----
 drivers/nvme/target/admin-cmd.c   |  37 ++--
 drivers/nvme/target/configfs.c    |  61 +++++++
 drivers/nvme/target/core.c        |  54 ++++--
 drivers/nvme/target/discovery.c   |   8 +-
 drivers/nvme/target/fabrics-cmd.c |  19 +-
 drivers/nvme/target/io-cmd-bdev.c | 115 +++++++++++-
 drivers/nvme/target/io-cmd-file.c |   8 +-
 drivers/nvme/target/nvmet.h       |  40 ++++-
 drivers/nvme/target/rdma.c        | 235 ++++++++++++++++++++++--
 include/linux/nvme.h              |   2 +
 17 files changed, 929 insertions(+), 127 deletions(-)

-- 
2.16.3


_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply	[flat|nested] 55+ messages in thread
* [PATCH 00/15 V3] nvme-rdma/nvmet-rdma: Add metadata/T10-PI support
@ 2020-01-06 13:37 Max Gurtovoy
  2020-01-06 13:37 ` [PATCH] nvme-cli/fabrics: Add pi_enable param to connect cmd Max Gurtovoy
  0 siblings, 1 reply; 55+ messages in thread
From: Max Gurtovoy @ 2020-01-06 13:37 UTC (permalink / raw)
  To: linux-nvme, kbusch, hch, sagi, martin.petersen
  Cc: axboe, vladimirk, shlomin, israelr, idanb, oren, maxg

Hello Sagi, Christoph, Keith, Martin and Co

This patchset adds metadata (T10-PI) support for NVMeoF/RDMA host side and
target side, using signature verbs API. This set starts with a few preparation
commits to the NVMe host core layer. It continues with NVMeoF/RDMA host
implementation + few preparation commits to the NVMe target core layer.
The patchset ends with NVMeoF/RDMA target implementation.

Configuration:
Host:
 - nvme connect --pi_enable --transport=rdma --traddr=10.0.1.1 --nqn=test-nvme

Target:
 - echo 1 > /config/nvmet/subsystems/${NAME}/attr_pi_enable
 - echo 1 > /config/nvmet/ports/${PORT_NUM}/param_pi_enable

The code was tested using Mellanox's ConnectX-4/ConnectX-5 HCAs.
This series applies on top of nvme_5.5 branch cleanly.

Changes from v2:
 - Convert the virtual start sector (which passed to bip_set_seed function)
   to be in integrity interval units (Patch 14/15)
 - Clarify some commit messages

Changes from v1:
 - Added Reviewed-by signatures
 - Added namespace features flag (Patch 01/15)
 - Remove nvme_ns_has_pi function (Patch 01/15)
 - Added has_pi field to struct nvme_request (Patch 01/15)
 - Subject change for patch 02/15
 - Fix comment for PCI metadata (Patch 03/15)
 - Rebase over "nvme: Avoid preallocating big SGL for data" patchset
 - Introduce NVME_INLINE_PROT_SG_CNT flag (Patch 05/15)
 - Introduce nvme_rdma_sgl structure (Patch 06/15)
 - Remove first_sgl pointer from struct nvme_rdma_request (Patch 06/15)
 - Split nvme-rdma patches (Patches 06/15, 07/15)
 - Rename is_protected to use_pi (Patch 07/15)
 - Refactor nvme_rdma_get_max_fr_pages function (Patch 07/15)
 - Added ifdef CONFIG_BLK_DEV_INTEGRITY (Patches 07/15, 09/15, 13/15,
   14/15, 15/15)
 - Added port configfs pi_enable (Patch 14/15)

Israel Rukshin (12):
  nvme: Introduce namespace features flag
  nvme-fabrics: Allow user enabling metadata/T10-PI support
  nvme: Introduce NVME_INLINE_PROT_SG_CNT
  nvme-rdma: Introduce nvme_rdma_sgl structure
  nvmet: Prepare metadata request
  nvmet: Add metadata characteristics for a namespace
  nvmet: Rename nvmet_rw_len to nvmet_rw_data_len
  nvmet: Rename nvmet_check_data_len to nvmet_check_transfer_len
  nvme: Add Metadata Capabilities enumerations
  nvmet: Add metadata/T10-PI support
  nvmet: Add metadata support for block devices
  nvmet-rdma: Add metadata/T10-PI support

Max Gurtovoy (3):
  nvme: Enforce extended LBA format for fabrics metadata
  nvme: Introduce max_integrity_segments ctrl attribute
  nvme-rdma: Add metadata/T10-PI support

 drivers/nvme/host/core.c          |  75 +++++---
 drivers/nvme/host/fabrics.c       |  11 ++
 drivers/nvme/host/fabrics.h       |   3 +
 drivers/nvme/host/nvme.h          |   9 +-
 drivers/nvme/host/pci.c           |   7 +
 drivers/nvme/host/rdma.c          | 368 +++++++++++++++++++++++++++++++++-----
 drivers/nvme/target/admin-cmd.c   |  37 ++--
 drivers/nvme/target/configfs.c    |  61 +++++++
 drivers/nvme/target/core.c        |  54 ++++--
 drivers/nvme/target/discovery.c   |   8 +-
 drivers/nvme/target/fabrics-cmd.c |  19 +-
 drivers/nvme/target/io-cmd-bdev.c | 115 +++++++++++-
 drivers/nvme/target/io-cmd-file.c |   8 +-
 drivers/nvme/target/nvmet.h       |  40 ++++-
 drivers/nvme/target/rdma.c        | 235 ++++++++++++++++++++++--
 include/linux/nvme.h              |   2 +
 16 files changed, 925 insertions(+), 127 deletions(-)

-- 
1.8.3.1


_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply	[flat|nested] 55+ messages in thread
* [PATCH 00/19 V4] nvme-rdma/nvmet-rdma: Add metadata/T10-PI support
@ 2020-02-24 16:45 Max Gurtovoy
  2020-02-24 16:45 ` [PATCH] nvme-cli/fabrics: Add pi_enable param to connect cmd Max Gurtovoy
  0 siblings, 1 reply; 55+ messages in thread
From: Max Gurtovoy @ 2020-02-24 16:45 UTC (permalink / raw)
  To: linux-nvme, sagi, linux-rdma, kbusch, hch, martin.petersen
  Cc: axboe, vladimirk, shlomin, israelr, idanb, maxg

Hello Sagi, Christoph, Keith, Martin and Co

This patchset adds metadata (T10-PI) support for NVMeoF/RDMA host side and
target side, using signature verbs API. This set starts with a few preparation
commits to the NVMe host core layer. It continues with NVMeoF/RDMA host
implementation + few preparation commits to the RDMA/rw API and to NVMe target
core layer. The patchset ends with NVMeoF/RDMA target implementation.

Configuration:
Host:
 - nvme connect --pi_enable --transport=rdma --traddr=10.0.1.1 --nqn=test-nvme

Target:
 - echo 1 > /config/nvmet/subsystems/${NAME}/attr_pi_enable
 - echo 1 > /config/nvmet/ports/${PORT_NUM}/param_pi_enable

The code was tested using Mellanox's ConnectX-4/ConnectX-5 HCAs.
This series applies on top of nvme_5.7 branch cleanly.

Changes from v3:
 - Added Reviewed-by signatures
 - New RDMA/rw patch (Patch 17/19)
 - Add mdts setting op for controllers (Patches 14/19, 18/19)
 - Rename NVME_NS_DIX_SUPPORTED to NVME_NS_MD_HOST_SUPPORTED and
   NVME_NS_DIF_SUPPORTED to NVME_NS_MD_CTRL_SUPPORTED (Patch 01/19)
 - Split "nvme: Introduce namespace features flag" patch (patch 02/19)
 - Rename nvmet_rdma_set_diff_domain to nvmet_rdma_set_sig_domain
   and nvme_rdma_set_diff_domain to nvme_rdma_set_sig_domain
   (Patches 08/19, 19/19)
 - Remove ns parameter from nvme_rdma_set_sig_domain/nvmet_rdma_set_sig_domain
   functions (patch 08/19, 19/19)
 - Rebase over nvme-5.7 branch

Changes from v2:
 - Convert the virtual start sector (which passed to bip_set_seed function)
   to be in integrity interval units (Patch 14/15)
 - Clarify some commit messages

Changes from v1:
 - Added Reviewed-by signatures
 - Added namespace features flag (Patch 01/15)
 - Remove nvme_ns_has_pi function (Patch 01/15)
 - Added has_pi field to struct nvme_request (Patch 01/15)
 - Subject change for patch 02/15
 - Fix comment for PCI metadata (Patch 03/15)
 - Rebase over "nvme: Avoid preallocating big SGL for data" patchset
 - Introduce NVME_INLINE_PROT_SG_CNT flag (Patch 05/15)
 - Introduce nvme_rdma_sgl structure (Patch 06/15)
 - Remove first_sgl pointer from struct nvme_rdma_request (Patch 06/15)
 - Split nvme-rdma patches (Patches 06/15, 07/15)
 - Rename is_protected to use_pi (Patch 07/15)
 - Refactor nvme_rdma_get_max_fr_pages function (Patch 07/15)
 - Added ifdef CONFIG_BLK_DEV_INTEGRITY (Patches 07/15, 09/15, 13/15,
   14/15, 15/15)
 - Added port configfs pi_enable (Patch 14/15)

Israel Rukshin (13):
  nvme: Introduce namespace features flag
  nvme: Add has_pi field to the nvme_req structure
  nvme-fabrics: Allow user enabling metadata/T10-PI support
  nvme: Introduce NVME_INLINE_PROT_SG_CNT
  nvme-rdma: Introduce nvme_rdma_sgl structure
  nvmet: Prepare metadata request
  nvmet: Add metadata characteristics for a namespace
  nvmet: Rename nvmet_rw_len to nvmet_rw_data_len
  nvmet: Rename nvmet_check_data_len to nvmet_check_transfer_len
  nvme: Add Metadata Capabilities enumerations
  nvmet: Add metadata/T10-PI support
  nvmet: Add metadata support for block devices
  nvmet-rdma: Add metadata/T10-PI support

Max Gurtovoy (6):
  nvme: Enforce extended LBA format for fabrics metadata
  nvme: Introduce max_integrity_segments ctrl attribute
  nvme-rdma: Add metadata/T10-PI support
  nvmet: Add mdts setting op for controllers
  RDMA/rw: Expose maximal page list for a device per 1 MR
  nvmet-rdma: Implement set_mdts controller op

 drivers/infiniband/core/rw.c      |  14 +-
 drivers/nvme/host/core.c          |  76 +++++---
 drivers/nvme/host/fabrics.c       |  11 ++
 drivers/nvme/host/fabrics.h       |   3 +
 drivers/nvme/host/nvme.h          |   9 +-
 drivers/nvme/host/pci.c           |   7 +
 drivers/nvme/host/rdma.c          | 367 +++++++++++++++++++++++++++++++++-----
 drivers/nvme/target/admin-cmd.c   |  41 +++--
 drivers/nvme/target/configfs.c    |  61 +++++++
 drivers/nvme/target/core.c        |  54 ++++--
 drivers/nvme/target/discovery.c   |   8 +-
 drivers/nvme/target/fabrics-cmd.c |  19 +-
 drivers/nvme/target/io-cmd-bdev.c | 113 +++++++++++-
 drivers/nvme/target/io-cmd-file.c |   6 +-
 drivers/nvme/target/nvmet.h       |  39 +++-
 drivers/nvme/target/rdma.c        | 252 ++++++++++++++++++++++++--
 include/linux/nvme.h              |   2 +
 include/rdma/rw.h                 |   1 +
 18 files changed, 955 insertions(+), 128 deletions(-)

-- 
1.8.3.1


_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

^ permalink raw reply	[flat|nested] 55+ messages in thread

end of thread, other threads:[~2020-02-24 18:00 UTC | newest]

Thread overview: 55+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-05 16:20 [PATCH 00/15] nvme-rdma/nvmet-rdma: Add metadata/T10-PI support Max Gurtovoy
2019-11-05 16:20 ` [PATCH] nvme-cli/fabrics: Add pi_enable param to connect cmd Max Gurtovoy
2019-11-07  2:36   ` Martin K. Petersen
2019-11-07 12:02     ` Max Gurtovoy
2019-11-09  1:55       ` Martin K. Petersen
2019-11-10  9:25         ` Max Gurtovoy
2019-11-12 17:47           ` Sagi Grimberg
2019-11-12 18:14             ` James Smart
2019-11-12 18:23               ` Sagi Grimberg
2019-11-05 16:20 ` [PATCH 01/15] nvme-fabrics: allow user enabling metadata/T10-PI support Max Gurtovoy
2019-11-12 17:48   ` Sagi Grimberg
2019-11-05 16:20 ` [PATCH 02/15] nvme: Fail __nvme_revalidate_disk in case of a spec violation Max Gurtovoy
2019-11-05 17:49   ` Christoph Hellwig
2019-11-12 17:52     ` Sagi Grimberg
2019-11-05 16:20 ` [PATCH 03/15] nvme: Introduce max_integrity_segments ctrl attribute Max Gurtovoy
2019-11-05 17:49   ` Christoph Hellwig
2019-11-12 17:53   ` Sagi Grimberg
2019-11-05 16:20 ` [PATCH 04/15] nvme: Inline nvme_ns_has_pi function Max Gurtovoy
2019-11-05 17:50   ` Christoph Hellwig
2019-11-05 16:20 ` [PATCH 05/15] nvme-rdma: Add metadata/T10-PI support Max Gurtovoy
2019-11-05 17:58   ` Christoph Hellwig
2019-11-20 10:41     ` Max Gurtovoy
2019-11-12 18:22   ` Sagi Grimberg
2019-11-13 14:35     ` Max Gurtovoy
2019-11-14 23:57       ` Sagi Grimberg
2019-11-05 16:20 ` [PATCH 06/15] block: Introduce BIP_NOMAP_INTEGRITY bip_flag Max Gurtovoy
2019-11-05 17:52   ` Christoph Hellwig
2019-11-07  2:43   ` Martin K. Petersen
2019-11-07 13:29     ` Max Gurtovoy
2019-11-09  2:10       ` Martin K. Petersen
2019-11-12 10:40         ` Max Gurtovoy
2019-11-05 16:20 ` [PATCH 07/15] nvmet: Prepare metadata request Max Gurtovoy
2019-11-05 16:20 ` [PATCH 08/15] nvmet: Add metadata characteristics for a namespace Max Gurtovoy
2019-11-05 17:59   ` Christoph Hellwig
2019-11-12 18:38     ` Sagi Grimberg
2019-11-05 16:20 ` [PATCH 09/15] nvmet: Rename nvmet_rw_len to nvmet_rw_data_len Max Gurtovoy
2019-11-05 17:59   ` Christoph Hellwig
2019-11-12 18:39   ` Sagi Grimberg
2019-11-05 16:20 ` [PATCH 10/15] nvmet: Rename nvmet_check_data_len to nvmet_check_transfer_len Max Gurtovoy
2019-11-05 18:00   ` Christoph Hellwig
2019-11-12 18:43   ` Sagi Grimberg
2019-11-05 16:20 ` [PATCH 11/15] nvmet: Introduce nvmet_rw_prot_len and nvmet_ns_has_pi Max Gurtovoy
2019-11-05 18:00   ` Christoph Hellwig
2019-11-05 16:20 ` [PATCH 12/15] nvme: Add Metadata Capabilities enumerations Max Gurtovoy
2019-11-05 16:20 ` [PATCH 13/15] nvmet: Add metadata/T10-PI support Max Gurtovoy
2019-11-05 16:20 ` [PATCH 14/15] nvmet: Add metadata support for block devices Max Gurtovoy
2019-11-05 16:20 ` [PATCH 15/15] nvmet-rdma: Add metadata/T10-PI support Max Gurtovoy
2019-11-05 18:02   ` Christoph Hellwig
2019-11-07 13:43     ` Max Gurtovoy
2019-11-12 18:34   ` Sagi Grimberg
2019-11-13 13:56     ` Max Gurtovoy
2019-11-14 23:45       ` Sagi Grimberg
2019-12-02 14:47 [PATCH 00/16 V2] nvme-rdma/nvmet-rdma: " Max Gurtovoy
2019-12-02 14:47 ` [PATCH] nvme-cli/fabrics: Add pi_enable param to connect cmd Max Gurtovoy
2020-01-06 13:37 [PATCH 00/15 V3] nvme-rdma/nvmet-rdma: Add metadata/T10-PI support Max Gurtovoy
2020-01-06 13:37 ` [PATCH] nvme-cli/fabrics: Add pi_enable param to connect cmd Max Gurtovoy
2020-02-24 16:45 [PATCH 00/19 V4] nvme-rdma/nvmet-rdma: Add metadata/T10-PI support Max Gurtovoy
2020-02-24 16:45 ` [PATCH] nvme-cli/fabrics: Add pi_enable param to connect cmd Max Gurtovoy

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).